DistRen Changeset - 03b8df75a6d4 · protofusion repositories

Changeset - 03b8df75a6d4

Parent rev.

Child rev.

[Not reviewed]

default

0 2 0

Ethan Zonca (ethanzonca) - 15 years ago 2010-09-02 23:20:06
e@ethanzonca.com

Changed URLs to simpleslave php interface, make this a var sometime

2 files changed with 192 insertions and 63 deletions:

INSTALL

185

src/server/slavefuncs.c

0 comments (0 inline, 0 general)

INSTALL

➞

Show inline comments

 Installation Instructions
 *************************
 Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
 Software Foundation, Inc.
 Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
 , 2007, 2008, 2009 Free Software Foundation, Inc.
 This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
    Copying and distribution of this file, with or without modification,
 are permitted in any medium without royalty provided the copyright
 notice and this notice are preserved.  This file is offered as-is,
 without warranty of any kind.
 Basic Installation
 ==================
 These are generic installation instructions.
    Briefly, the shell commands `./configure; make; make install' should
 configure, build, and install this package.  The following
 more-detailed instructions are generic; see the `README' file for
 instructions specific to this package.  Some packages provide this
 `INSTALL' file but do not implement all of the features documented
 below.  The lack of an optional feature in a given package is not
 necessarily a bug.  More recommendations for GNU packages can be found
 in *note Makefile Conventions: (standards)Makefile Conventions.
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
 those values to create a `Makefile' in each directory of the package.
 It may also create one or more `.h' files containing system-dependent
 definitions.  Finally, it creates a shell script `config.status' that
 you can run in the future to recreate the current configuration, and a
 file `config.log' containing compiler output (useful mainly for
 debugging `configure').
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
 the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
 cache files.
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
 diffs or instructions to the address given in the `README' so they can
 be considered for the next release.  If you are using the cache, and at
 some point `config.cache' contains results you don't want to keep, you
 may remove or edit it.
    The file `configure.ac' (or `configure.in') is used to create
 `configure' by a program called `autoconf'.  You only need
 `configure.ac' if you want to change it or regenerate `configure' using
 a newer version of `autoconf'.
 `configure' by a program called `autoconf'.  You need `configure.ac' if
 you want to change it or regenerate `configure' using a newer version
 of `autoconf'.
 The simplest way to compile this package is:
+   The simplest way to compile this package is:
 . `cd' to the directory containing the package's source code and type
      `./configure' to configure the package for your system.  If you're
      using `csh' on an old version of System V, you might need to type
      `sh ./configure' instead to prevent `csh' from trying to execute
      `configure' itself.
      `./configure' to configure the package for your system.
      Running `configure' takes awhile.  While running, it prints some
      messages telling which features it is checking for.
      Running `configure' might take a while.  While running, it prints
      some messages telling which features it is checking for.
 . Type `make' to compile the package.
 . Optionally, type `make check' to run any self-tests that come with
      the package.
+     the package, generally using the just-built uninstalled binaries.
 . Type `make install' to install the programs and any data files and
      documentation.
      documentation.  When installing into a prefix owned by root, it is
      recommended that the package be configured and built as a regular
      user, and only the `make install' phase executed with root
      privileges.
 . You can remove the program binaries and object files from the
 . Optionally, type `make installcheck' to repeat any self-tests, but
      this time using the binaries in their final installed location.
      This target does not install anything.  Running this target as a
      regular user, particularly if the prior `make install' required
      root privileges, verifies that the installation completed
      correctly.
 . You can remove the program binaries and object files from the
      source code directory by typing `make clean'.  To also remove the
      files that `configure' created (so you can compile the package for
      a different kind of computer), type `make distclean'.  There is
      also a `make maintainer-clean' target, but that is intended mainly
      for the package's developers.  If you use it, you may have to get
      all sorts of other programs in order to regenerate files that came
      with the distribution.
 . Often, you can also type `make uninstall' to remove the installed
      files again.  In practice, not all packages have tested that
      uninstallation works correctly, even though it is required by the
      GNU Coding Standards.
 . Some packages, particularly those that use Automake, provide `make
      distcheck', which can by used by developers to test that all other
      targets like `make install' and `make uninstall' work correctly.
      This target is generally not run by end users.
 Compilers and Options
 =====================
 Some systems require unusual options for compilation or linking that the
 `configure' script does not know about.  Run `./configure --help' for
 details on some of the pertinent environment variables.
    Some systems require unusual options for compilation or linking that
 the `configure' script does not know about.  Run `./configure --help'
 for details on some of the pertinent environment variables.
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
 is an example:
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
    *Note Defining Variables::, for more details.
 Compiling For Multiple Architectures
 ====================================
 You can compile the package for more than one kind of computer at the
+   You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
 own directory.  To do this, you must use a version of `make' that
 supports the `VPATH' variable, such as GNU `make'.  `cd' to the
 own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 source code in the directory that `configure' is in and in `..'.  This
 is known as a "VPATH" build.
    With a non-GNU `make', it is safer to compile the package for one
 architecture at a time in the source code directory.  After you have
 installed the package for one architecture, use `make distclean' before
 reconfiguring for another architecture.
    If you have to use a `make' that does not support the `VPATH'
 variable, you have to compile the package for one architecture at a
 time in the source code directory.  After you have installed the
 package for one architecture, use `make distclean' before reconfiguring
 for another architecture.
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
 "universal" binaries--by specifying multiple `-arch' options to the
 compiler but only a single `-arch' option to the preprocessor.  Like
 this:
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
                  CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
                  CPP="gcc -E" CXXCPP="g++ -E"
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
 using the `lipo' tool if you have problems.
 Installation Names
 ==================
 By default, `make install' installs the package's commands under
+   By default, `make install' installs the package's commands under
 `/usr/local/bin', include files under `/usr/local/include', etc.  You
 can specify an installation prefix other than `/usr/local' by giving
 `configure' the option `--prefix=PREFIX'.
 `configure' the option `--prefix=PREFIX', where PREFIX must be an
 absolute file name.
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
 pass the option `--exec-prefix=PREFIX' to `configure', the package uses
 PREFIX as the prefix for installing programs and libraries.
 Documentation and other data files still use the regular prefix.
    In addition, if you use an unusual directory layout you can give
 options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 you can set and what kinds of files go in them.  In general, the
 default for these options is expressed in terms of `${prefix}', so that
 specifying just `--prefix' will affect all of the other directory
 specifications that were not explicitly provided.
    The most portable way to affect installation locations is to pass the
 correct locations to `configure'; however, many packages provide one or
 both of the following shortcuts of passing variable assignments to the
 `make install' command line to change installation locations without
 having to reconfigure or recompile.
    The first method involves providing an override variable for each
 affected directory.  For example, `make install
 prefix=/alternate/directory' will choose an alternate location for all
 directory configuration variables that were expressed in terms of
 `${prefix}'.  Any directories that were specified during `configure',
 but not in terms of `${prefix}', must each be overridden at install
 time for the entire installation to be relocated.  The approach of
 makefile variable overrides for each directory variable is required by
 the GNU Coding Standards, and ideally causes no recompilation.
 However, some platforms have known limitations with the semantics of
 shared libraries that end up requiring recompilation when using this
 method, particularly noticeable in packages that use GNU Libtool.
    The second method involves providing the `DESTDIR' variable.  For
 example, `make install DESTDIR=/alternate/directory' will prepend
 `/alternate/directory' before all installation names.  The approach of
 `DESTDIR' overrides is not required by the GNU Coding Standards, and
 does not work on platforms that have drive letters.  On the other hand,
 it does better at avoiding recompilation issues, and works well even
 when some directory options were not specified in terms of `${prefix}'
 at `configure' time.
 Optional Features
 =================
    If the package supports it, you can cause programs to be installed
 with an extra prefix or suffix on their names by giving `configure' the
 option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
 Optional Features
 =================
 Some packages pay attention to `--enable-FEATURE' options to
    Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
 `README' should mention any `--enable-' and `--with-' options that the
 package recognizes.
    For packages that use the X Window System, `configure' can usually
 find the X include and library files automatically, but if it doesn't,
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
    Some packages offer the ability to configure how verbose the
 execution of `make' will be.  For these packages, running `./configure
 --enable-silent-rules' sets the default to minimal output, which can be
 overridden with `make V=1'; while running `./configure
 --disable-silent-rules' sets the default to verbose, which can be
 overridden with `make V=0'.
 Particular systems
 ==================
    On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
 CC is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
      ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
 parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
 a workaround.  If GNU CC is not installed, it is therefore recommended
 to try
      ./configure CC="cc"
 and if that doesn't work, try
      ./configure CC="cc -nodtk"
    On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
 directory contains several dysfunctional programs; working variants of
 these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
 in your `PATH', put it _after_ `/usr/bin'.
    On Haiku, software installed for all users goes in `/boot/common',
 not `/usr/local'.  It is recommended to use the following options:
      ./configure --prefix=/boot/common
 Specifying the System Type
 ==========================
 There may be some features `configure' cannot figure out automatically,
 but needs to determine by the type of machine the package will run on.
 Usually, assuming the package is built to be run on the _same_
 architectures, `configure' can figure that out, but if it prints a
 message saying it cannot guess the machine type, give it the
    There may be some features `configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
 _same_ architectures, `configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
      CPU-COMPANY-SYSTEM
 where SYSTEM can have one of these forms:
      OS KERNEL-OS
      OS
      KERNEL-OS
    See the file `config.sub' for the possible values of each field.  If
 `config.sub' isn't included in this package, then this package doesn't
 need to know the machine type.
    If you are _building_ compiler tools for cross-compiling, you should
 use the option `--target=TYPE' to select the type of system they will
 produce code for.
    If you want to _use_ a cross compiler, that generates code for a
 platform different from the build platform, you should specify the
 "host" platform (i.e., that on which the generated programs will
 eventually be run) with `--host=TYPE'.
 Sharing Defaults
 ================
 If you want to set default values for `configure' scripts to share, you
 can create a site shell script called `config.site' that gives default
 values for variables like `CC', `cache_file', and `prefix'.
    If you want to set default values for `configure' scripts to share,
 you can create a site shell script called `config.site' that gives
 default values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
 A warning: not all `configure' scripts look for a site script.
 Defining Variables
 ==================
 Variables not defined in a site shell script can be set in the
+   Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
 them in the `configure' command line, using `VAR=value'.  For example:
      ./configure CC=/usr/local2/bin/gcc
 causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).  Here is a another example:
 overridden in the site shell script).
      /bin/bash ./configure CONFIG_SHELL=/bin/bash
 Unfortunately, this technique does not work for `CONFIG_SHELL' due to
 an Autoconf bug.  Until the bug is fixed you can use this workaround:
 Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
 configuration-related scripts to be executed by `/bin/bash'.
      CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
 `configure' Invocation
 ======================
 `configure' recognizes the following options to control how it operates.
    `configure' recognizes the following options to control how it
 operates.
 `--help'
 `-h'
      Print a summary of the options to `configure', and exit.
      Print a summary of all of the options to `configure', and exit.
 `--help=short'
 `--help=recursive'
      Print a summary of the options unique to this package's
      `configure', and exit.  The `short' variant lists options used
      only in the top level, while the `recursive' variant lists options
      also present in any nested packages.
 `--version'
 `-V'
      Print the version of Autoconf used to generate the `configure'
      script, and exit.
 `--cache-file=FILE'
      Enable the cache: use and save the results of the tests in FILE,
      traditionally `config.cache'.  FILE defaults to `/dev/null' to
      disable caching.
 `--config-cache'
@@ @@ -222,15 +341,25 @@ configuration-related scripts to be exec @@
 `--quiet'
 `--silent'
 `-q'
      Do not print messages saying which checks are being made.  To
      suppress all normal output, redirect it to `/dev/null' (any error
      messages will still be shown).
 `--srcdir=DIR'
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 `--prefix=DIR'
      Use DIR as the installation prefix.  *note Installation Names::
      for more details, including other options available for fine-tuning
      the installation locations.
 `--no-create'
 `-n'
      Run the configure checks, but stop before creating any output
      files.
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.

src/server/slavefuncs.c

➞

Show inline comments

@@ @@ -413,38 +413,38 @@ void prepareJobPaths(int jobnum, int fra @@
   char *jobdatapath;
    _distren_asprintf(&jobdatapath, "job%d", jobnum);
    _distren_asprintf(urltoTar, "http://data.distren.org/job%d/job%d.tar.gz", jobnum, jobnum); // Prepares URL to download from
    _distren_asprintf(urltoJobfile, "http://data.distren.org/job%d/job.blend", jobnum); // Prepares URL to download from
    _distren_asprintf(pathtoTar, "%s/%s/job%d.tar.gz", datadir, jobdatapath, jobnum); // Prepares destination to save to
    _distren_asprintf(pathtoTardir, "%s/%s/", datadir, jobdatapath); // Prepares destination to save to
    _distren_asprintf(pathtoJob, "%s/%s/", datadir, jobdatapath);
    _distren_asprintf(pathtoJobfile, "%s/%s/job.blend", datadir, jobdatapath ); // Prepares the path to the jobfile
-   _distren_asprintf(urltoOutput, "http://dev.distren.org/slaveUpload.php?jobkey=%d&framekey=%d",jobnum,framenum); // Prepares the URL where output is posted
    _distren_asprintf(urltoOutput, "http://distren.org/slaveUpload.php?jobkey=%d&framekey=%d",jobnum,framenum); // Prepares the URL where output is posted
    _distren_asprintf(pathtoRenderOutput, "%s/%s/output/job%d-frame#.%s", datadir, jobdatapath, jobnum, outputExt ); // Note: the # is for blender to put in framenum in output file
    _distren_asprintf(pathtoOutput, "%s/%s/output/job%d-frame%d.%s", datadir, jobdatapath, jobnum, framenum, outputExt ); // Note: the # is for blender to put in framenum in output file
    _distren_asprintf(pathtoOutdir, "%s/%s/output", datadir, jobdatapath);
    free(jobdatapath);
+}
 int checkUsername(char *username)
+{
   if(username == NULL || strcmp(username, "!username") == 0 )
+    {
-     fprintf(stderr, "\nPlease ensure that your username is present in distrenslave.conf, or use the -u flag to set a username.\n");
+     fprintf(stderr, "\nPlease ensure that your slave ID is present in distrenslave.conf, or use the -u flag to set a slave ID.\n");
      return 1;
+   }
    else
      if( username != NULL || strcmp(username, "!username") != 0 )
+       {
          // Log in the user
          if(login_user(username) == 1){
            // Logged in OK
            return 0;
+         }
          else
+           {
@@ @@ -601,61 +601,61 @@ struct _web_memorystruct _web_getrequest @@
     res = curl_easy_perform(curl);
     curl_easy_cleanup(curl);
+  }
   /* we're done with libcurl, so clean it up */
   curl_global_cleanup();
   return chunk; // 0 is OK, 1 is 404 or other error
+}
 void _web_finishframe(int slavekey, char *slavepass, int jobnum, int framenum){
   char *url;
-  _distren_asprintf(&url,"http://dev.distren.org/slave/act.php?mode=finishframe&slavekey=%d&slavepass=%s&jobnum=%d&framenum=%d", slavekey, slavepass, jobnum, framenum);
   _distren_asprintf(&url,"http://distren.org/slave/act.php?mode=finishframe&slavekey=%d&slavepass=%s&jobnum=%d&framenum=%d", slavekey, slavepass, jobnum, framenum);
   struct _web_memorystruct data = _web_getrequest(url);
   free(url);
   fprintf(stderr,"%s\n", data.memory);
   if(data.memory)
     free(data.memory);
+}
 void _web_resetframe(int slavekey, char *slavepass, int jobnum, int framenum){
   fprintf(stderr,"Resetting frame %d in job %d on server... ",framenum,jobnum);
   char *url;
-  _distren_asprintf(&url,"http://dev.distren.org/slave/act.php?mode=resetframe&slavekey=%d&slavepass=%s&jobnum=%d&framenum=%d", slavekey, slavepass, jobnum, framenum);
   _distren_asprintf(&url,"http://distren.org/slave/act.php?mode=resetframe&slavekey=%d&slavepass=%s&jobnum=%d&framenum=%d", slavekey, slavepass, jobnum, framenum);
   struct _web_memorystruct data = _web_getrequest(url);
   free(url);
   fprintf(stderr,"%s\n", data.memory);
   if(data.memory)
     free(data.memory);
+}
 void _web_startframe(int slavekey, char *slavepass, int jobnum, int framenum){
   if(DEBUG)
     fprintf(stderr,"Marking frame %d started on server... ",framenum);
   char *url;
-  _distren_asprintf(&url,"http://dev.distren.org/slave/act.php?mode=startframe&slavekey=%d&slavepass=%s&jobnum=%d&framenum=%d", slavekey, slavepass, jobnum, framenum);
   _distren_asprintf(&url,"http://distren.org/slave/act.php?mode=startframe&slavekey=%d&slavepass=%s&jobnum=%d&framenum=%d", slavekey, slavepass, jobnum, framenum);
   struct _web_memorystruct data = _web_getrequest(url);
   free(url);
   fprintf(stderr,"%s\n", data.memory);
   if(data.memory)
     free(data.memory);
+}
 int _web_getwork(int slavekey, char *slavepass, int *jobnum, int *framenum){
   char *url;
-  _distren_asprintf(&url,"http://dev.distren.org/slave/act.php?mode=getwork&slavekey=%d&slavepass=%s", slavekey, slavepass);
   _distren_asprintf(&url,"http://distren.org/slave/act.php?mode=getwork&slavekey=%d&slavepass=%s", slavekey, slavepass);
   struct _web_memorystruct data = _web_getrequest(url);
   free(url);
   if(!data.memory || !strcmp(data.memory,",")){
     fprintf(stderr,"*** No work available on server! In other news, really weird things are happening. Check it out. You shouldn't be seeing this.\n");
     return 0;
+  }
   else if(!strcmp(data.memory, "ERROR_BADKEY")){
     fprintf(stderr,"*** Slave %d does not exist!\n",slavekey);
     free(data.memory);
     return 0;
+  }
@@ @@ -687,25 +687,25 @@ int _web_getwork(int slavekey, char *sla @@
       free(data.memory);
       return 1;
+    }
     else
       return 0; // error
+  }
+}
 void _web_setrenderpower(int slavekey, char *slavepass, int renderpower){
   fprintf(stderr,"Setting render power on server... ");
   char *url;
-  _distren_asprintf(&url,"http://dev.distren.org/slave/act.php?mode=setrenderpower&slavekey=%d&slavepass=%s&renderpower=%d", slavekey, slavepass, renderpower);
   _distren_asprintf(&url,"http://distren.org/slave/act.php?mode=setrenderpower&slavekey=%d&slavepass=%s&renderpower=%d", slavekey, slavepass, renderpower);
   struct _web_memorystruct data = _web_getrequest(url);
   free(url);
   fprintf(stderr,"%s\n", data.memory);
   if(data.memory)
     free(data.memory);
+}
 int slaveBenchmark(char *datadir, int *benchmarkTime, int *renderPower){
   int ret;
   int frameToRender = 1;
   char *frame_str;

0 comments (0 inline, 0 general)