sleep(1); /*< @todo eliminate the need for this line*/

      return 1;

    }

  *job = distrenjob_ptr;

  *frame = &distrenjob_ptr->frameset[frame_counter];

  return 0;

}

/** Checks for dead, laggy, or stale slaves */

void frame_watchdog(struct distrenjob *distrenjob_head)

{

  struct distrenjob *distrenjob_ptr;

  unsigned int counter;

  /*watchdog_forgiveness = seconds of forgiveness before frame is re-assigned */

  distrenjob_ptr = distrenjob_head;

  for(distrenjob_ptr = distrenjob_head; distrenjob_ptr; distrenjob_ptr = distrenjob_ptr->next)

  /* iterate through jobs */

    /* if the job has been started, checks by seeing if either to first or second frame has been started */

    if(distrenjob_ptr->frameset[0].status != FRAMESETSTATUS_UNASSIGNED || distrenjob_ptr->frameset[1].status != FRAMESETSTATUS_UNASSIGNED)

      for(counter = 0; counter < distrenjob_ptr->total_frames; counter ++)

      /* iterate through all frames for this job*/

        if((distrenjob_ptr->frameset[counter].start_time + distrenjob_ptr->watchdog_forgiveness) < clock())

        /*

        If frame is not completed within the number of seconds specified by watchdog_forgiveness

        Then change the frame status to unassigned

        */

          distrenjob_ptr->frameset[counter].status = FRAMESETSTATUS_UNASSIGNED;

}

/**

   Finds a distrenjob struct based on the jobnum

   @arg jobnum job number to search for

   @return NULL on job doesn't exist

 */

struct distrenjob *distrenjob_get(struct distrenjob *head, jobnum_t jobnum)

{

  struct distrenjob *distrenjob_ptr;

  /*

    The conditions of the for loop will leave distrenjob_ptr at NULL if the end of the list is reached. It will leave it pointing to the correct job if it is found.

   */

  for(distrenjob_ptr = head;

      distrenjob_ptr

        && distrenjob_ptr->jobnum != jobnum;

      distrenjob_ptr = distrenjob_ptr->next);

  return distrenjob_ptr;

}

/**

   Removes a distrenjob from the distrenjob linked list. It does not free the distrenjob, however. You should do that with distrenjob_free() from distrenjob.h

   @arg head pointer to the head of the linkedlist of distrenjobs

 */

void distrenjob_remove(struct distrenjob *head, struct distrenjob *bj)

{

  struct distrenjob *previous_distrenjob;

  for(previous_distrenjob = head;

      previous_distrenjob

	&& previous_distrenjob->next != bj; /*< stop on the distrenjob that comes before bj */

      previous_distrenjob = previous_distrenjob->next)

    /* all of the action is in the definition of the for loop itself */;

  /*

    This removes references to bj from the linked list. I.E., we now skip bj when iterating through the list

  */

  previous_distrenjob->next = bj->next;

  general_info.jobs_in_queue--;

}

/* Grabs config info from confs */

int distrend_do_config(int argc, char *argv[], struct distrend_config **config)

{

  cfg_opt_t myopts_listen[] =

    {

      CFG_SIMPLE_STR("type", NULL),

      CFG_SIMPLE_STR("path", NULL),

      CFG_SIMPLE_INT("port", NULL),

      CFG_END()

    };

  cfg_opt_t myopts[] =

    {

      CFG_SEC("listen",  /* this must be imported into struct listens (which must still be declared) */

          myopts_listen,

          CFGF_MULTI),

      CFG_SIMPLE_STR("datadir", NULL),

      CFG_END()

    };

  struct distrenjob *distrenjob;

  int tmp;

  xmlinit();

  /*

   * test xml2distrenjob()

   */

  tmp = xml2distrenjob(&distrenjob, "distrenjob.xml.example");

  if(tmp)

    fprintf(stderr, "xml2distrenjob() returned %d. Try to cd to distren/doc if you want to test out the xml2distrenjob() function. (This will only fix this error if the error is due to an inability of the xml library to access distrenjob.xml.example)\n", tmp);

  else

    fprintf(stderr, "using email ``%s'' for user ``%s'' -- reading in XML files and pulling data from them using libxml2+XPath works!!!\n", distrenjob->email, distrenjob->submitter);

  fprintf(stderr, "%s:%d running config\n", __FILE__, __LINE__);

  *config = malloc(sizeof(struct distrend_config));

  myopts[1].simple_value = &(*config)->datadir;

  options_init(argc, argv, &(*config)->mycfg, myopts, "server", &(*config)->options);

  fprintf(stderr, "using %s as datadir\n", (*config)->datadir);

  xmlcleanup();

  return 0;

}

int distrend_config_free(struct distrend_config *config)

{

  options_free(config->options);

  free(config);

  return 0;

}

/* ************************** Main ************************* */

int main(int argc, char *argv[])

{

  /* @TODO: Put some arg-grabbing code here */

  struct distrenjob head;

  head.priority = 0; // make head have the highest priority

  int cont;

  struct distrend_listenset *listenset;

  struct distrend_config *config;

  enum clientstatus

  {

    CLIENTSTATUS_UNINITIALIZED = 0,

    CLIENTSTATUS_BUSY = 1,

    CLIENTSTATUS_IDLE = 2

  } clientstatus;

  cont = 1;

  memset(&head, '\0', sizeof(struct distrenjob));

  start_data(); // Starts fresh or loads data from xml dump. Should we grab the return?

  distrend_do_config(argc, argv, &config);

  distrend_listen(&listenset, config);

  /* This is called the "main loop" */

  while(cont)

    {

      struct distren_action *action;

      int clientsays; /*< temporary example variable, will be replaced when we can handle messages */

      distrend_accept(&action);

      cont = distrend_do(action);

      /* Make the following code more event-driven */

      frame_watchdog(&head);

      struct frameset *frame;

      struct distrenjob *job;

      /* If the client is idle, must be modified for climbing through linked list of clients (client->clientnum) */

      if(clientstatus == CLIENTSTATUS_IDLE)

	{

	  int returnnum = find_jobframe(&head, &job, &frame); // Finds a frame to render

	  if(returnnum)

	    {

	      fprintf(stderr,"No frames are available to render at this time. Idling...\n");

	      sleep(10);

	    }

	  else

	    /* returnnum == 0 */

	    remotio_send_to_client(frame->num, job->jobnum); // Pseudo-sends data to client

	}

      /* If the client states that they finished the frame */

      	if(clientsays == DISTREN_REQUEST_DONEFRAME){

      	  clientstatus = CLIENTSTATUS_IDLE; // Sets the client back to idle

      	  finish_frame(&head, job, frame->num); // @TODO: Check that finish_frame really gets the jobnum somehow (Matt: can we give it the pointer to the job?, if not we can use distrenjob_get(&head, jobnum))

      	}

      distrend_action_free(action);

    }

  distrend_unlisten(listenset);

  distrend_config_free(config);

  return 0;

}

#include "remoteio.h"

#include <string.h>

#include <stdio.h>

#include <unistd.h>

#include <sys/stat.h> /*< mkdir() */

#include <stdlib.h>

int slavestatus = 0; // Ugh global vars

int main(int argc, char *argv[])

{

int counter;

/* Parses arguments, skips if there are no args */

for(counter=0; counter<argc; counter++){

	if(strcmp(argv[counter], "-h") == 0) {

		fprintf(stderr, "Usage: distrenslave [option] <username> <emailaddr>\nStarts a distren slave\n\t-h\tshow this help\n\t-c\tregisters a user with [username] and [emailaddr] \n");

		return 2;

	}

}

	if(argc>1

		&& (strcmp("-c", argv[1]) == 0))

	{

		char *username;

		char *email;

		if(argc != 4)

		{

			fprintf(stderr, "I need more arguments!\n%d is not enough!\n Invoke 'distrenslave -c <username> <emailaddr> to register. \n Already registered? Edit your distrenslave.conf file!\n'", argc - 1);

			return 234;

		}

		username = argv[2];

		email = argv[3];

		if(!strchr(email, '@'))

		{

			fprintf(stderr, "I want to see an '@' in your email address!\n%s may be good enough for you, but I need more!\n", email);

			return 235;

		}

		if( register_user(username, email) == 1){

			// register_user generates a key, too */

			fprintf(stderr,"Registration successfull. You may now invoke distrenslave with no arguments.\n");

			return 0;

		}

		else{

			fprintf(stderr,"Please try again! :D\n");

			return 0;

		}

	}

/* End arg parser */

/* Option getter: Creates vars to grab stuff from conf, uses the options include to grab this data */

char *username;

char *datadir;

cfg_t * my_cfg;

cfg_opt_t myopts[] = {

		CFG_SIMPLE_STR("username", &username),

		CFG_SIMPLE_STR("datadir", &datadir),

		CFG_END()

		};

struct options_common *commonopts;

username = NULL;

options_init(argc,argv,&my_cfg, myopts, "slave", &commonopts);

/* End option getter */

/* Notifies the user if there is no username in the conf file */

	if(username == NULL || strcmp(username, "!username") == 0 ){

	  fprintf(stderr, "\nYou didn't register!\nPlease register or edit your config. (see -h)\nIf this error persists, check distrenslave.conf to ensure all items are filled.\n");

	}

	else if( username != NULL || strcmp(username,"!username") != 0 ){

		// Logs ya in:

		if(login_user(username) == 1){

			fprintf(stderr,"You should now be logged into distren.\n");

		}

		else{

			fprintf(stderr,"Login failed. I have no clue why. Sorry.\n");

			return 0;

		}

	}

	else{

	  fprintf(stderr,"Something is terribly wrong!");

	}

/* Code-filled Variables  */

int jobnum;          // The job number that we're currently working

int framenum;        // @TODO: Remotio should fill this

int gotframe = 0;        // set this to 1 after data for a job is received from the server

int busy = 0;        // Client business 1=busy 0=idle

char *urltoTar;      // Full URL to the server-side location of job#.tgz

char *pathtoTar;     // Full path to the location of the job#.tgz

char *urltoOutput;   // Full URL where output is posted

char *pathtoJobfile; // Full path to the job's main file

char *pathtoXml;     // Full path to the job's xml file

char *pathtoOutput;  // Full path to the output (rendered) file

char *outputExt;     // Output Extension (e.g., JPG)

int threads = sysconf(_SC_NPROCESSORS_ONLN); // Equals the number of currently online processors

// FOR Win32: int threads = sysinfo.dwNumberOfProcessors;

struct distrenjob *myjob; // Structure to hold data gathered from the XML file

/* If the server says that every frame for jobnum is finished */

if( 1 == 0)

  {

    delete_jobdata(jobnum, datadir);

  }

// If the slave is getting job info...

if(gotframe ==1)

  {

    /* @TODO: Add remotio hooks */

    // jobnum = remoteio_read(jobnum); // Set jobnum from remoteio (we could use info from struct, but we need this info to download the xmlfile)

    jobnum = 0;

    //framenum = remoteio_read(jobnum); // Set framenum from remoteio

    framenum = 0;

    char *tarcmd;

    char *outdir;

    char *jobdatapath;

    fprintf(stderr, "Received %d in job %d, preparing to render...\n",framenum,jobnum);

    /**

       Variable Preparation

       @todo find where to free() all of these

    */

    _distren_asprintf(&jobdatapath, "job%d", jobnum);

    _distren_asprintf(&urltoTar, "http://protofusion.org/distren/stor/job%d/job%d.tar.gz",jobnum); // Prepares URL to download from

    _distren_asprintf(&pathtoTar, "%s/stor/jobdata/job%d.tar.gz", datadir, jobnum); // Prepares destination to save to

    _distren_asprintf(&pathtoJobfile, "%s/%s/job.blend", datadir, jobdatapath ); // Prepares the path to the jobfile

    _distren_asprintf(&urltoOutput, "http://protofusion.org/distren/stor/job%d/output/", jobdatapath ); // Prepares the URL where output is posted

    _distren_asprintf(&pathtoXml, "%s/job%d/job%d.xml",datadir, jobnum ); // Prepares the path to the job's XML file

      // Downloads the job tar if it isn't  present. @TODO: Delete old job data

      struct stat buffer;

      int fstatus = stat(pathtoJobfile, &buffer);

      // If stat'ing the jobfile shows that the jobfile doesn't exist, we'll download it.

      if(fstatus == -1){

              // Downloads the Tar @TODO: add progress bar

              if( curlget(urltoTar, pathtoTar) == 0){

                fprintf(stderr, "File downloaded without errors\n");

              }

              else{

                fprintf(stderr, "Download tar from server failed. Either the server is down, or the job hosting system is screwed up.\nContact admin@protofusion.org and include this message.\nGoodbye. Better luck next time.\n");

              }

      }

      else{

        fprintf(stderr, "Using cached job file...\n");

      }

    _distren_asprintf(&outdir, "/tmp/distren/job%d", jobnum); /*< @todo free() */

    mkdir("/tmp/distren", 0750); /* @TODO: Make this less *nix-specific */

    mkdir(outdir, 0750);

    _distren_asprintf(&tarcmd, "tar -xvf \"%s\" -C \"%s\"", pathtoTar, outdir); /* @TODO: Make this portable. Libtar or something? */

    system(tarcmd);

    free(tarcmd);

    // Parses a job's XML file, puts data in the myjob struct

    if(xml2distrenjob(&myjob, pathtoXml) == 0){

      fprintf(stderr,"Well, the XML craziness may have worked. Maybe. \n");

      distrenjob_free(&myjob); // Frees things up if it was successful. xml2distrenjob() really (usually) only fails if malloc'ing inside it fails

    }

    else{

      fprintf(stderr,"I think the XML craziness may have failed, so I'll terminate just for fun.\n");

      return 1;

    }

    /* Variable-fillers which require XML */

    outputExt = myjob->output_format; /* @TODO: FIXME! */

    _distren_asprintf(&pathtoOutput, "%s/job%d/output/frame%d.%s", datadir, jobnum, framenum, outputExt ); // Prepares the path to the jobfile

    /** Series of IF's for jobtype based on xml content */

    if(1==1){

     exec_blender(myjob, pathtoJobfile, pathtoOutput, framenum, threads); // @TODO: This warning should be fixed :D

    }

    // Consider placing the following in the exec_blender() function

    while(busy == 1){

        fprintf(stderr, "Rendering frame %d in job %d...",framenum,jobnum);

        sleep(5); // or not... this should be more event-driven, but should still give a heartbeat to the server

      }

    busy = 2;

    // busy = 1; // @TODO: When done rendering, set this.

     }

    // When blender is finished, run this...

      if(busy==2){

        fprintf(stderr, "Finished frame %d in job %d, uploading...",framenum,jobnum);

        char *outputurl;

        _distren_asprintf(&outputurl, "http://protofusion.org/distren/stor/job%d/",jobnum); // Aggregates the output url

        curlpost(pathtoOutput, urltoOutput); // uploads (HTML POST) the output at outputpath to the server at outputurl

        busy=0;

        // Slave now becomes idle, doesn't need to tell the server anything, ssh handles this.

      }

  return 0;

}

/*

  Copyright 2009 Nathan Phillip Brink, Ethan Zonca, Matthew Orlando

  This file is a part of DistRen.

  DistRen is free software: you can redistribute it and/or modify

  it under the terms of the GNU Affero General Public License as published by

  the Free Software Foundation, either version 3 of the License, or

  (at your option) any later version.

  DistRen is distributed in the hope that it will be useful,

  but WITHOUT ANY WARRANTY; without even the implied warranty of

  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

  GNU Affero General Public License for more details.

  You should have received a copy of the GNU Affero General Public License

  along with DistRen.  If not, see <http://www.gnu.org/licenses/>.

*/

 /*

  * Registration on server. Needs attention. Prevent account spamming.

  * distrenslave -c username email@example.com

 */

#include "asprintf.h"

#include "slavefuncs.h"

#include "distrenjob.h"

#include "execio.h"

#include <curl/curl.h>

#include <curl/types.h>

#include <curl/easy.h>

#include <stdio.h>

#include <string.h>

#include <unistd.h>

#include <stdlib.h>

#include <sys/stat.h>

#include <fcntl.h>

/**

 utility function for XPath-ish stuff:

 */

xmlNodePtr xml_quickxpath(xmlXPathContextPtr xpathctxt, xmlChar *path)

{

  xmlNodePtr toreturn;

  xmlXPathObjectPtr xmlxpathobjptr;

  xmlxpathobjptr = xmlXPathEval(path, xpathctxt);

  if(!xmlxpathobjptr

     || !xmlxpathobjptr->nodesetval->nodeNr)

    {

      fprintf(stderr, "XPath resolution failed for ``%s'' in ``%s'' (``%s'')\n", path, xpathctxt->doc->name, xpathctxt->doc->URL);

      return (xmlNodePtr)NULL;

    }

  toreturn = *(xmlxpathobjptr->nodesetval->nodeTab);

  xmlXPathFreeObject(xmlxpathobjptr);

  return toreturn;

}

/** Stub for deleting job data from the disk. @TODO: unstubify me! */

int delete_jobdata(int jobnum, char *datadir)

{

  char *jobpath;

  _distren_asprintf(&jobpath, "%s/%d", datadir, jobnum);

  rmdir(jobpath);

  fprintf(stderr, "I just failed to remove all of your job data because I can only delete empty directories! Haha!\nPlease contact the dev team :D\n\tWe'd be overjoyed to know that someone was willing to try to use this in this devel/design/planning stage ;-)\n");

  return 0;

}

/** Stub stub stubbiness ugh @TODO: Kill me. */

}

/** Function referenced by curlget() to write data to disk. */

size_t curl_writetodisk(void *ptr, size_t size, size_t nmemb, FILE *stream)

 {

    return fwrite(ptr, size, nmemb, stream);

  }

/** Helper function for cURL's progressbar */

int curl_progress( char *Bar,double t,double d,double ultotal,double ulnow)

{

fprintf(stderr,"Downloading... %f%% complete\r",d/t*100);

return 0;

}

/** Retrieves a URL with cURL and saves it to disk */

int curlget(char *url, char *out){

  double *Bar; // Stores cURL progressbar info

  CURL *curl;

  CURLcode res;

  FILE *outfile;

  curl = curl_easy_init();

  if(curl) {

	outfile = fopen(out, "w"); // Open where we're writing to

  curl_easy_setopt(curl, CURLOPT_URL, url);

  curl_easy_setopt(curl, CURLOPT_WRITEDATA, outfile);

  curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, curl_writetodisk); // this MUST be set for win32 compat.

  curl_easy_setopt(curl, CURLOPT_NOPROGRESS, 0);

  curl_easy_setopt(curl, CURLOPT_PROGRESSFUNCTION, curl_progress);

  curl_easy_setopt(curl, CURLOPT_PROGRESSDATA, &Bar);

  res = curl_easy_perform(curl);

  curl_easy_cleanup(curl);

  }

  fprintf(stderr,"\n"); // Clears out he progressbar's carriage return

  return res; // 0 means OK, nonzero means AAAH badness

}

/** Posts a file to a url with cUrl */

int curlpost(char *filename, char *url){

  char *targetname = "uploadedfile"; // Name of the target in the php file on the server (Don't change me unless you have different PHP code)

  CURL *curl;

  CURLcode res;

  struct curl_httppost *formpost=NULL;

  struct curl_httppost *lastptr=NULL;

  struct curl_slist *headerlist=NULL;

  static const char buf[] = "Expect:";

  curl_global_init(CURL_GLOBAL_ALL);

  /* upload field... */

  curl_formadd(&formpost,

               &lastptr,

               CURLFORM_COPYNAME, targetname,

               CURLFORM_FILE, filename,

               CURLFORM_END);

  /* filename field... */

  curl_formadd(&formpost,

               &lastptr,

               CURLFORM_COPYNAME, "filename",

               CURLFORM_COPYCONTENTS, filename,

               CURLFORM_END);

  /* submit field, not usually needed, just in case... */

  curl_formadd(&formpost,

               &lastptr,

               CURLFORM_COPYNAME, "submit",

               CURLFORM_COPYCONTENTS, "send",

               CURLFORM_END);

  curl = curl_easy_init();

  headerlist = curl_slist_append(headerlist, buf);

  if(curl) {

    /* Setting the URL to get the post, and the contents of the post */

    curl_easy_setopt(curl, CURLOPT_URL, url);

    curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost);

    res = curl_easy_perform(curl);

    curl_easy_cleanup(curl);

    /* cleanup the formpost junk */

    curl_formfree(formpost);

    curl_slist_free_all (headerlist);

  }

  return 0;

}

/** Generates a SSH key with ssh-keygen */

int ssh_keygen(){

	/* Checks to see if the keys are already present. */

	int status;

	struct stat buffer;

	status = stat(SYSCONFDIR "/distren.id_rsa", &buffer);

	if(status != -1){

		fprintf(stderr, "***Please delete etc/distren.id_rsa and etc/distren.id_rsa.pub to register.\n");

		return 0;

	}

	/* start execio code */

	char *command = "ssh-keygen"; // @TODO: append .exe if win32?

	int ret;

	char *cmd[] = { command, "-q", "-f", SYSCONFDIR "/distren.id_rsa", "-N", "", (char *)NULL }; // TODO: Give me the correct args!

	char buf[10];

	struct execio *testrem;

	size_t readlen;

	ret = execio_open(&testrem, command, cmd); // @TODO: This path will be absolute for testing, should be relative to install on production

	buf[9] = '\0';

	while(!execio_read(testrem, buf, 9, &readlen))

	    {

	      if(readlen > 9) {

		fprintf(stderr, "Something is terribly wrong!\n");

	      }

	      buf[readlen] = '\0';

	      fprintf(stderr, "read \"%s\"\n", buf);

	    }

	execio_close(testrem);

	/* end execio code */

	// Supposedly execio returns 1 if it has bad args.

	if(ret == 1){

		fprintf(stderr, "Generating your key failed. Ensure that ssh-keygen is present!\n"); // Use different executor that searches the path? there is one...

		return 0;

	}

	else{

		fprintf(stderr,"We successfully generated your key! Yay!\n");

		return 1;

	}

return 0;

}

/** Registers the user on the DistRen server */

int register_user(char *username, char *email)

{

/* Note: this code moved here from after the useradd code, so useradd doesn't happen if there is an existing key, etc */

  /* puts the person's username in the conf */

  if(conf_replace(username) == 0){

	fprintf(stderr, "Failed!\n");

	return 0;

	}

  /* generates keys for login, @TODO: pub key must somehow be sent to the server. */

  if(ssh_keygen() == 0){

	  fprintf(stderr, "Failed!\n");

	  return 0;

  }

  /*

   * All created user accounts should be sandboxed accordingly, requiring a different skel, and the default shell to be rbash. Also,

   * a custom path defined in the .bashrc of the skel is needed.

   */

  int ret;

  char buf[10];

  struct execio *testrem;

  char *execargv[] =

    {

      "ssh",

      "distren_setup@protofusion.org",

      "-i",

      SYSCONFDIR "/setup_rsa", // @TODO: How will we distribute this key?

      "-p",

      "23",

      "newuser",

      "-M",

      "-c",

      email,

      "-d",

      "/home/distren",

      "--gid",

      "541",

      username,

      (char *)NULL

    };

  size_t readlen;

 ret = execio_open(&testrem, "ssh", execargv); // TODO: Grab returns from this someday.

  buf[9] = '\0';

  while(!execio_read(testrem, buf, 9, &readlen))

    {

      if(readlen > 9) {

	fprintf(stderr, "!!!! Something is terribly wrong!\n");

      }

      buf[readlen] = '\0';

      fprintf(stderr, "read \"%s\"\n", buf);

    }

  execio_close(testrem);

  /* @TODO: Parse the output buffer or something to check when user creation fails due to duplicate users. This is pretty important. */

  if(ret == 1){

          fprintf(stderr, "Unable to log you in. Ensure that ssh is present on your system.\n"); // Use different executor that searches the path? there is one...

          return 0;

  }

  else{

/*

  Copyright 2009 Nathan Phillip Brink, Ethan Zonca, Matthew Orlando

  This file is a part of DistRen.

  DistRen is free software: you can redistribute it and/or modify

  it under the terms of the GNU Affero General Public License as published by

  the Free Software Foundation, either version 3 of the License, or

  (at your option) any later version.

  DistRen is distributed in the hope that it will be useful,

  but WITHOUT ANY WARRANTY; without even the implied warranty of

  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

  GNU Affero General Public License for more details.

  You should have received a copy of the GNU Affero General Public License

  along with DistRen.  If not, see <http://www.gnu.org/licenses/>.

*/

#ifndef _DISTREN_SLAVEFUNCS_H

#define _DISTREN_SLAVEFUNCS_H

#include "distrenjob.h"

#include <libxml/xpath.h>

#include <stdio.h>

xmlNodePtr xml_quickxpath(xmlXPathContextPtr xpathctxt, xmlChar *path);

int delete_jobdata(int jobnum, char *datadir);

size_t curl_writetodisk(void *ptr, size_t size, size_t nmemb, FILE *stream);

int curlget(char *url, char *out);

int curlpost(char *filename, char *url);

int ssh_keygen();

int register_user(char *username, char *email);

int login_user(char *username);

int conf_replace(char *username);

void exec_blender(struct distrenjob* distrenjob, char *input, char *output, int frame, int threads);

void xmlinit();

void xmlcleanup();

#endif