/*

  Copyright 2008 Nathan Phillip Brink, Ethan Zonca

  This file is a part of DistRen.

  DistRen is free software: you can redistribute it and/or modify

  it under the terms of the GNU Affero General Public License as published by

  the Free Software Foundation, either version 3 of the License, or

  (at your option) any later version.

  DistRen is distributed in the hope that it will be useful,

  but WITHOUT ANY WARRANTY; without even the implied warranty of

  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

  GNU Affero General Public License for more details.

  You should have received a copy of the GNU Affero General Public License

  along with DistRen.  If not, see <http://www.gnu.org/licenses/>.

*/

/* This file contains the code which both processes (renders) jobs as a slave, and the code which distributes frames to slaves after receiving them from the client portion of the codebase. */

 /* Just some notes -- Ethan Zonca

 * ++ Make data availible for other apps to parse

 * Server<==>Client Communication

 * Upload while rendering

 */

#include "execio.h"

#include "options.h"

#include <confuse.h>

#include <stdio.h>

#include <malloc.h>

#define MAX_BLENDJOBS 100 // maximum number of stored jobs in memory, per job type (lux/blend). Eventually we can dump this data to disk, or atleast the remainder not in memory...

// Global Vars, try to cut down on these

int jobnum = 0; // The next job number to create in the queue

int hcfjob; // Highest consecutively finished job

int highest_jobnum; // The job number of the most recently created job, this is used when creating new jobs

/* ******************* Structs ************************ */

// Stores config info? editmycomment

struct distrend_config

{

  cfg_t *mycfg;

  struct options_common *options;

  struct distrend_listen **listens; /*< Null terminated array of structs */

};

// Stores Blender Job Info

struct blendjob {

  char *name;

  char *submitter;

  char *email;

  int priority;  // 1 is lowest, 10 is highest, 0 is done

  int percent_done;

  int completed_frames; // number of completed frames for stats/etc

  int assigned_frames; // number of assigned frames (that are not yet completed) for stats/etc

  int total_frames; // how many frames are in the animation for stats/etc

  struct frameset *frameset;

} blendjob[MAX_BLENDJOBS];

// Matt's code for framesets? I think that the int frame_num is obselete because it will be frameset[framenum]

// struct for storing information on each frame for a particular blender job

struct frameset {

	int frame_num; // frame number to render

	char slave_name; // user that frame is assigned to

	int frame_status; // status of frame, 0= unassigned, 1= taken, 2= done

} frameset[]; // Frameset array is generated by status_report_generator function

                         // Using this method to save memory, because if animation starts on a high frame number, it would waste a lot of RAM on empty structures

/* ********************** Functions ************************* */

// **** Finish-Setter: Sets a frame to the "completed" status. Should be modified to set =2 rather than ++ ?

void finish_frame(int frame){

  blendjob[jobnum].frameset[frame].frame_status = 2;

}

// **** Queuer: Adds files to the queue

void queue(int type, char *name, char *submitter, char *email, int priority, int mode, int spp, struct frameset *frameset) {

	// Type: 1 = blender, add more types later

	// jobnum is the next available job number

	if(type == 1){

    blendjob[jobnum].name = name;

    blendjob[jobnum].submitter = submitter;

    blendjob[jobnum].email = email;

    blendjob[jobnum].priority = priority;

    blendjob[jobnum].frameset = frameset;

  }

  else{

    // Throw error.

  }

jobnum++; // Advance the jobnumber for the next queued job

}

/* ************************** Main ************************* */

int main(int argc, char *argv[])

{

// Begin non-working framework?

	int distrend_do_config(int argc, char *argv[], struct distrend_config *config)

	{

	    {

	      CFG_SIMPLE_STR("type", NULL),

	      CFG_SIMPLE_STR("path", NULL),

	      CFG_SIMPLE_INT("port", NULL),

	      CFG_END()

	  };

	  cfg_opt_t myopts[] =

	    {

	      CFG_SEC("listen",  /* this must be imported into struct listens (which must still be declared) */

		      myopts_listen

		      ,

		      CFGF_MULTI),

	      CFG_END()

	    };

	  config = malloc(sizeof(struct distrend_config));

	  options_init(argc, argv, &config->mycfg, myopts, "server", &config->options);

	  return 0;

	}

	int distrend_config_free(struct distrend_config *config)

	{

	  options_free(config->options);

	  free(config);

	  return 0;

	}

// End non-working framework?

  int cont = 1;

  struct distrend_listenset *listenset;

  struct distrend_config *config;

  distrend_do_config(argc, argv, config);

  distrend_listen(&listenset, config);

  /* This is called the ``main loop'' */

  while(cont)

    {

      struct distren_action *action;

      distrend_accept(&action);

      cont = distrend_do(action);

      distrend_action_free(action);

    }

  distrend_unlisten(listenset);

  distrend_config_free(config);

  return 0;

}

// End main. Please take this into account when putting in code!!! Use the bracket highlighter!!!

/* ************************ Newness ************************ */

/*

 frame[frame] Assignments:

  "NULL" - don't render me

  "0" - cancelled

  "1" - unassigned

  "2" - assigned to slave

  "3" - completed by slave and uploaded

 Have a script crawl through each job in the arrays, priority-biased, and assign a frame to each slave.

 Then we will need some sort of watchdog to monitor slaves on the main server to check for stales. Maybe not worry about this for now.

*/

// This function creates frame array based on the total number of frames to be rendered, which will then be parsed by function frame_farmer.

void frame_num_struct_builder(int sframe, int eframe) {

	int jobnum_new = highest_jobnum + 1;

	int total = (sframe - eframe) +1;  // total number of frames

	int fcount = sframe; // Used to create all the frames in the structure from sframe to eframe

	int x = 0;

	blendjob[jobnum_new].total_frames = total; // sets the total number of frames in animation for status purposes

	while(x < total){

		blendjob[jobnum_new].frameset[x].frame_num = fcount;

		x++;

		fcount++;

	}

	highest_jobnum++;

}

// matches your computer up with a lovely frame to render

int frame_finder(){

	int finder_jobnum = 0;

	int frameset_count = 0; // the frameset number, note* frames in an animation don't start at zero

	short int done = 0;

	int priority = 10;

	while(priority >= 1){ // start the scan for the next job with the highest priority

		finder_jobnum = hcfjob + 1; // reset it to start scanning at first uncompleted job for the pass at each priority level

		while(finder_jobnum <= highest_jobnum){

				done = 1;									  // notice it starts by looking at the oldest job first

				break;

			}

				break;    // If none is found it goes to the next job to see if it is of the current priority value

			else

				finder_jobnum++;

		}

			break;

		priority--;

	}

	while(your_frame < blendjob[finder_jobnum].total_frames){ // Finds the frameset number with a frame that needs to be rendered

			break;																// and frameset_count is used to give the frame number later in this funciton

	}

blendjob[jobnum].frameset[x].frame_status++; // sets the value of the frame to 2, which means its taken

your_frame = blendjob[jobnum].frameset[x].frame_num; //  Takes the frameset found in the while statement above, and extracts the frame number from it and assigns it to the int your_frame

	status_report_generator();  //the job priority can be changed to 0

return your_frame; // your_frame is returned as the frame to be rendered

}

// This figures out how much of the job is done, where jobnum corresponds to the job number

// This uses pointers, so when it is run it updates certain values in memory

void status_report_generator(){

	while(blendjob[(hcfjob+1)].priority = 0)  //If the job after the highest consecutively finished job is finished

	int num1 = hcfjob+1; // to scan through jobs

	int num2 = 0;		 // to scan through frames

	while(num1 <= highest_jobnum){

			if(blendjob[num1].frameset[num2].priority != 0){ // If the job is not done, scan it

				float finished_frames = 0; // variable that counts the completed frames

				int pending_frames = 0; // variable that counts the assigned frames

				float percent = 0;  // variable that stores the percent done of the blendjob

				while(num2 <= blendjob[jobnum].total_frames){ // If

					if(blendjob[jobnum].frameset[num2].frame_status = 2)

						finished_frames++;

					if(blendjob[jobnum].frameset[num2].frame_status = 1)

						pending_frames++;

					num2++;

				}

				percent = (finished_frames / blendjob[num1].total_frames) * 100;

				blendjob[num1].completed_frames = finished_frames;

				blendjob[num1].assigned_frames = pending_frames;

				blendjob[num1].percent_done = percent;

			}

			num1++;

		}

	}

// This function makes the value of the frame 2, which means its completed.

void the_finisher(int frame){

	blendjob[jobnum].frameset[frame].frame_status++;

}

/*

 * **********************************************************************************

 * Slave functions / etc resides below. Wouldn't a seperate file make this easier??

 *

 * Slave listens on server for a command in the format of each function...

 * We need if's for returns... ==> watchdog

 * **********************************************************************************

*/

// Registration on server. Needs attention. Prevent account spamming.

// Key transfer?

// Set up something like: distrend -c username email@example.com

void registeruser(char *username, char *email){

  // Logs into sandboxed user on zserver2 and registers a user. Should eventually generate a key on the server and return it to the user.

  // All created user accounts should be sandboxed accordingly, requiring a different skel, and the default shell to be rbash. Also,

  // a custom path defined in the .bash_profile of the skel is needed.

  char buf[10];

  struct execio *testrem;

  char *execargv[] =

    {

  "ssh",

  "distren_setup@protofusion.org",

  "-i",

  "setup.rsa", // default distributed key, account can only create users.

  "-p",

  "23",

  "sudo /usr/sbin/useradd",

  "-M",

  "-c",

  email,

  "-d",

  "/home/distren",

  "--gid",

  "541", // Add in shellscript to generate ssh key and return it to the user somehow

  username,

  (char *)NULL

  };

  size_t readlen;

  fprintf(stderr, "Opening stream:\n", execio_open(&testrem, "ssh", execargv));

  buf[9] = '\0'; // null-terminating the array...

  while(!execio_read(testrem, buf, 9, &readlen)) // What's with the readlen stuff?

    {

      if(readlen > 9) {

	fprintf(stderr, "!!!! Something is terribly wrong!\n");

      }

      if(buf == 0) {

	fprintf(stderr, "Make this throw a successfull message if no output is returned... maybe");

      }

    buf[readlen] = '\0'; // Null-terminating the end of it again based on how large the data is?

    fprintf(stderr, "read \"%s\"\n", buf);

    }

  execio_close(testrem);

}

void loginuser(char *username, int secret){

  // Logs into sandboxed user on zserver2 as a client, currently does nothing

  char buf[10];

  struct execio *testrem;

  char *execargv[] =

    {

  "ssh",

  "username@protofusion.org", // username must be read from the conf

  "-i",

  "username.rsa", // Key created from registeruser()

  "-p",

  "23",

  "echo",

  "hello", // This should eventually open a non-terminating connection to the server for communication

  (char *)NULL

  };

  size_t readlen;

  fprintf(stderr, "Opening stream:\n", execio_open(&testrem, "ssh", execargv));

  buf[9] = '\0'; // null-terminating the array...

  while(!execio_read(testrem, buf, 9, &readlen)) // What's with the readlen stuff?

    {

      if(readlen > 9) {

	fprintf(stderr, "!!!! Something is terribly wrong!\n");

      }

      if(buf == 0) {

	fprintf(stderr, "Put stuff here-ish to check whether the operation(s) were successful.");

      }

    buf[readlen] = '\0'; // Null-terminating the end of it again based on how large the data is?

    fprintf(stderr, "read \"%s\"\n", buf);

    }

  execio_close(testrem);

}

// Executors

void exec_blender(char *input, char *output, int frame) {

  int ret;

  /* SEGFAULTAGE :-D */

  char *cmd[] = { "blender", "-b", "-o", output, input, "-f", frame, (char *)0 };

  ret = execv("/usr/bin/blender", cmd);

  // OHNOBINKI! ... check this... Its supposed to send a command back to the server and run the_finisher(); function which sets the frame status to complete.

  fprintf(stdin, the_finisher(frame));

}