DistRen Changeset - aaedffb71a83 · protofusion repositories

Changeset - aaedffb71a83

Parent rev.

Child rev.

[Not reviewed]

default

0 6 0

ethanzonca - 17 years ago 2009-02-11 17:29:47

Capitalized DistRen!

6 files changed with 49 insertions and 103 deletions:

AUTHORS

INSTALL

configure.ac

src/client/distren.c

src/common/options.c

src/server/distrend.c

0 comments (0 inline, 0 general)

AUTHORS

➞

Show inline comments

-This software is a joint initiative of [protofusion] (http://protofusion.org/) and Oh! No! Publishing (http://ohnopublishing.net/)
+DistRen is a joint initiative of [protofusion] (http://protofusion.org/) and Oh! No! Publishing (http://ohnopublishing.net/)
 The principal devs are:
 Ethan Zonca <ethanzonca@protofusion.org>

INSTALL

➞

Show inline comments

@@ @@ -2,15 +2,15 @@ Installation Instructions @@
 *************************
 Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-, 2007, 2008 Free Software Foundation, Inc.
 , 2007 Free Software Foundation, Inc.
-   This file is free documentation; the Free Software Foundation gives
 This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 Basic Installation
 ==================
-   Briefly, the shell commands `./configure; make; make install' should
 Briefly, the shell commands `./configure; make; make install' should
 configure, build, and install this package.  The following
 more-detailed instructions are generic; see the `README' file for
 instructions specific to this package.
@@ @@ -73,9 +73,9 @@ The simplest way to compile this package @@
 Compilers and Options
 =====================
    Some systems require unusual options for compilation or linking that
 the `configure' script does not know about.  Run `./configure --help'
 for details on some of the pertinent environment variables.
 Some systems require unusual options for compilation or linking that the
 `configure' script does not know about.  Run `./configure --help' for
 details on some of the pertinent environment variables.
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
@@ @@ -88,7 +88,7 @@ is an example: @@
 Compiling For Multiple Architectures
 ====================================
-   You can compile the package for more than one kind of computer at the
 You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
 own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
@@ @@ -100,24 +100,10 @@ architecture at a time in the source cod @@
 installed the package for one architecture, use `make distclean' before
 reconfiguring for another architecture.
    On MacOS X 10.5 and later systems, you can create libraries and
 executables that work on multiple system types--known as "fat" or
 "universal" binaries--by specifying multiple `-arch' options to the
 compiler but only a single `-arch' option to the preprocessor.  Like
 this:
      ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
                  CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
                  CPP="gcc -E" CXXCPP="g++ -E"
    This is not guaranteed to produce working output in all cases, you
 may have to build one architecture at a time and combine the results
 using the `lipo' tool if you have problems.
 Installation Names
 ==================
-   By default, `make install' installs the package's commands under
 By default, `make install' installs the package's commands under
 `/usr/local/bin', include files under `/usr/local/include', etc.  You
 can specify an installation prefix other than `/usr/local' by giving
 `configure' the option `--prefix=PREFIX'.
@@ @@ -140,7 +126,7 @@ option `--program-prefix=PREFIX' or `--p @@
 Optional Features
 =================
-   Some packages pay attention to `--enable-FEATURE' options to
 Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ @@ -152,36 +138,14 @@ find the X include and library files aut @@
 you can use the `configure' options `--x-includes=DIR' and
 `--x-libraries=DIR' to specify their locations.
 Particular systems
 ==================
    On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
 CC is not installed, it is recommended to use the following options in
 order to use an ANSI C compiler:
      ./configure CC="cc -Ae"
 and if that doesn't work, install pre-built binaries of GCC for HP-UX.
    On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
 parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
 a workaround.  If GNU CC is not installed, it is therefore recommended
 to try
      ./configure CC="cc"
 and if that doesn't work, try
      ./configure CC="cc -nodtk"
 Specifying the System Type
 ==========================
    There may be some features `configure' cannot figure out
 automatically, but needs to determine by the type of machine the package
 will run on.  Usually, assuming the package is built to be run on the
 _same_ architectures, `configure' can figure that out, but if it prints
 a message saying it cannot guess the machine type, give it the
 There may be some features `configure' cannot figure out automatically,
 but needs to determine by the type of machine the package will run on.
 Usually, assuming the package is built to be run on the _same_
 architectures, `configure' can figure that out, but if it prints a
 message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
@@ @@ -207,9 +171,9 @@ eventually be run) with `--host=TYPE'. @@
 Sharing Defaults
 ================
    If you want to set default values for `configure' scripts to share,
 you can create a site shell script called `config.site' that gives
 default values for variables like `CC', `cache_file', and `prefix'.
 If you want to set default values for `configure' scripts to share, you
 can create a site shell script called `config.site' that gives default
 values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ @@ -218,7 +182,7 @@ A warning: not all `configure' scripts l @@
 Defining Variables
 ==================
-   Variables not defined in a site shell script can be set in the
 Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ @@ -237,19 +201,11 @@ an Autoconf bug. Until the bug is fixed @@
 `configure' Invocation
 ======================
    `configure' recognizes the following options to control how it
 operates.
 `configure' recognizes the following options to control how it operates.
 `--help'
 `-h'
      Print a summary of all of the options to `configure', and exit.
 `--help=short'
 `--help=recursive'
      Print a summary of the options unique to this package's
      `configure', and exit.  The `short' variant lists options used
      only in the top level, while the `recursive' variant lists options
      also present in any nested packages.
      Print a summary of the options to `configure', and exit.
 `--version'
 `-V'
@@ @@ -276,16 +232,6 @@ operates. @@
      Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 `--prefix=DIR'
      Use DIR as the installation prefix.  *Note Installation Names::
      for more details, including other options available for fine-tuning
      the installation locations.
 `--no-create'
 `-n'
      Run the configure checks, but stop before creating any output
      files.
 `configure' also accepts some other, not widely useful, options.  Run
 `configure --help' for more details.

configure.ac

➞

Show inline comments

 # Copyright 2008 Nathan Phillip Brink, Ethan Zonca
+#
-# This file is a part of distren.
+# This file is a part of DistRen.
+#
 # Distren is free software: you can redistribute it and/or modify
 # it under the terms of the GNU Affero General Public License as published by
 # the Free Software Foundation, either version 3 of the License, or
 # (at your option) any later version.
+#
-# Distren is distributed in the hope that it will be useful,
+# DistRen is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU Affero General Public License for more details.
+#
 # You should have received a copy of the GNU Affero General Public License
-# along with distren.  If not, see <http://www.gnu.org/licenses/>.
+# along with DistRen.  If not, see <http://www.gnu.org/licenses/>.
 AC_PREREQ(2.61)
 AC_INIT([distren],[0.0],[ohnobinki@ohnopublishing.net])

src/client/distren.c

➞

Show inline comments

 /*
   Copyright 2008 Nathan Phillip Brink, Ethan Zonca
   This file is a part of distren.
   Distren is free software: you can redistribute it and/or modify
   This file is a part of DistRen.
   DistRen is free software: you can redistribute it and/or modify
   it under the terms of the GNU Affero General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.
   Distren is distributed in the hope that it will be useful,
   DistRen is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU Affero General Public License for more details.
   You should have received a copy of the GNU Affero General Public License
-  along with distren.  If not, see <http://www.gnu.org/licenses/>.
+  along with DistRen.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include <stdio.h>

src/common/options.c

➞

Show inline comments

 /*
   Copyright 2008 Nathan Phillip Brink, Ethan Zonca
   This file is a part of distren.
   Distren is free software: you can redistribute it and/or modify
   This file is a part of DistRen.
   DistRen is free software: you can redistribute it and/or modify
   it under the terms of the GNU Affero General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.
   Distren is distributed in the hope that it will be useful,
   DistRen is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU Affero General Public License for more details.
   You should have received a copy of the GNU Affero General Public License
-  along with distren.  If not, see <http://www.gnu.org/licenses/>.
+  along with DistRen.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include "options.h"
 #include <confuse.h>
-int genericfunc()
 int genericfunc()
+{
   /* Conf File Parser */
     cfg_opt_t opts[] =
+    {
@@ @@ -37,7 +37,7 @@ int genericfunc() @@
 /* End Conf File Parser */
-  cfg_free(cfg);
   cfg_free(cfg);
        cfg = cfg_init(opts, CFGF_NONE);
        if(cfg_parse(cfg, "distrend.conf") == CFG_PARSE_ERROR)
@@ @@ -47,6 +47,6 @@ int genericfunc() @@
 printf("Conf File Test", cfg_getstr(cfg, "test"));
-  cfg_free(cfg);
   cfg_free(cfg);
+}

src/server/distrend.c

➞

Show inline comments

 /*
   Copyright 2008 Nathan Phillip Brink, Ethan Zonca
   This file is a part of distren.
   Distren is free software: you can redistribute it and/or modify
   This file is a part of DistRen.
   DistRen is free software: you can redistribute it and/or modify
   it under the terms of the GNU Affero General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.
   Distren is distributed in the hope that it will be useful,
   DistRen is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU Affero General Public License for more details.
   You should have received a copy of the GNU Affero General Public License
-  along with distren.  If not, see <http://www.gnu.org/licenses/>.
+  along with DistRen.  If not, see <http://www.gnu.org/licenses/>.
 */
 #include <stdio.h>

0 comments (0 inline, 0 general)