DistRen Changeset - c44707a801aa · protofusion repositories

Changeset - c44707a801aa

Parent rev.

Child rev.

[Not reviewed]

default

0 1 0

ethanzonca - 16 years ago 2009-07-06 18:02:19

Commenting, removed some lux stuff so we can focus on blender. We really need to clean up.

1 file changed with 105 insertions and 133 deletions:

src/server/distrend.c

105

133

0 comments (0 inline, 0 general)

src/server/distrend.c

➞

Show inline comments

@@ @@ -29,23 +29,18 @@ @@
 #include <stdio.h>
 #include "execio.h"
 // needs to be implemented
 #include "options.h"
 #include <confuse.h>
 #define max 100
 // maximum number of stored jobs in memory, per job type (lux/blend). Eventually we can dump this data to disk, or atleast the remainder not in memory...
 #define max 100 // maximum number of stored jobs in memory, per job type (lux/blend). Eventually we can dump this data to disk, or atleast the remainder not in memory...
 int jobnum = 0;
-int hcfjob; //highest consecutively finished job
+int hcfjob; // Highest consecutively finished job
 int highest_jobnum; // The job number of the most recently created job, this is used when creating new jobs
 // Structures for storing job information
 // OOOOOOkay so we really need a struct for frameset rather than just an array, because we should track who each frame was sent out to. Please do this, someone! :D
 struct {
   char *name;
   char *submitter;
@@ @@ -55,16 +50,13 @@ struct { @@
   int completed_frames; // number of completed frames
   int assigned_frames; // number of assigned frames (that are not yet completed)
   int total_frames; // how many frames are in the animation
   struct frameset **frameset;
   struct frameset **frameset; // What exactly is this now? hehe
   // Ok... what's going on with using these??? --ethanzonca
   int frame_num[];
   char slave_name[][];
   short int frame_status[];
   // For secondary upload location...
   char url;
   char login_name;
   char login_pass;
 } blendjob[max];
 /*
@@ @@ -79,17 +71,6 @@ struct { @@
 // -- end of Matthew's handywork --
 */
 struct {
   char *name;
   char *submitter;
   char *email;
   int priority;
   int mode; // 0 = Static Render, stop at Spp, or infinity if spp is null. Framerange is ignored || 1 = animation, stop at Spp and stay in framerange.
   int spp;
   struct frameset ** frameset;
 } luxjob[max];
 int main(int argc, char *argv[])
+{
@@ @@ -156,91 +137,6 @@ struct distrend_config @@
+}
 /* Notes on Registration:
 We need to generate a key in registeruser() that is returned to the client.
 How will we transfer the key?
 */
 // Registration on server. Needs attention. Prevent account spamming.
 // Set up something like: distrend -c username email@example.com
 void registeruser(char *username, char *email){
   // Logs into sandboxed user on zserver2 and registers a user. Should eventually generate a key on the server and return it to the user.
   // All created user accounts should be sandboxed accordingly, requiring a different skel, and the default shell to be rbash. Also,
   // a custom path defined in the .bash_profile of the skel is needed.
   char buf[10];
   struct execio *testrem;
   char *execargv[] =
+    {
   "ssh",
   "distren_setup@protofusion.org",
   "-i",
   "setup.rsa", // default distributed key, account can only create users.
   "-p",
   "23",
   "sudo /usr/sbin/useradd",
   "-M",
   "-c",
   email,
   "-d",
   "/home/distren",
   "--gid",
   "541", // Add in shellscript to generate ssh key and return it to the user somehow
   username,
   (char *)NULL
   };
   size_t readlen;
   fprintf(stderr, "Opening stream:\n", execio_open(&testrem, "ssh", execargv));
   buf[9] = '\0'; // null-terminating the array...
   while(!execio_read(testrem, buf, 9, &readlen)) // What's with the readlen stuff?
+    {
       if(readlen > 9) {
 	fprintf(stderr, "!!!! Something is terribly wrong!\n");
+      }
       if(buf == 0) {
 	fprintf(stderr, "Make this throw a successfull message if no output is returned... maybe");
+      }
     buf[readlen] = '\0'; // Null-terminating the end of it again based on how large the data is?
     fprintf(stderr, "read \"%s\"\n", buf);
+    }
   execio_close(testrem);
+}
 void loginuser(char *username, int secret){
   // Logs into sandboxed user on zserver2 as a client, currently does nothing
   char buf[10];
   struct execio *testrem;
   char *execargv[] =
+    {
   "ssh",
   "username@protofusion.org", // username must be read from the conf
   "-i",
   "username.rsa", // Key created from registeruser()
   "-p",
   "23",
   "echo",
   "hello", // This should eventually open a non-terminating connection to the server for communication
   (char *)NULL
   };
   size_t readlen;
   fprintf(stderr, "Opening stream:\n", execio_open(&testrem, "ssh", execargv));
   buf[9] = '\0'; // null-terminating the array...
   while(!execio_read(testrem, buf, 9, &readlen)) // What's with the readlen stuff?
+    {
       if(readlen > 9) {
 	fprintf(stderr, "!!!! Something is terribly wrong!\n");
+      }
       if(buf == 0) {
 	fprintf(stderr, "Put stuff here-ish to check whether the operation(s) were successful.");
+      }
     buf[readlen] = '\0'; // Null-terminating the end of it again based on how large the data is?
     fprintf(stderr, "read \"%s\"\n", buf);
+    }
   execio_close(testrem);
+}
@@ @@ -252,16 +148,18 @@ void loginuser(char *username, int secre @@
 /*
  frame[frame] Assignments:
   "NULL" - don't render me
   "0" - cancelled
   "1" - unassigned
   "2" - assigned to slave
   "3" - completed by slave and uploaded
  Have a script crawl through each job in the arrays, ordered by priority?, and assign a certain number of frames to each slave.
  Then we will need some sort of watchdog to monitor slaves on the main server to check for stales.
  Have a script crawl through each job in the arrays, priority-biased, and assign a frame to each slave.
  Then we will need some sort of watchdog to monitor slaves on the main server to check for stales. Maybe not worry about this for now.
 */
 /* -- Coding using OLD FRAMESET STRUCTURE... temporarily saving it!! --
+/* -- Coding using OLD FRAMESET STRUCTURE... temporarily saving it!! -- :: Normaldotcom glances at lordofwar with a concerned look...
 // This function creates frame array based on the total number of frames to be rendered, which will then be parsed by function frame_farmer.
 void frame_num_struct_builder(int sframe, int eframe) {
 	int jobnum_new = highest_jobnum + 1;
@@ @@ -436,6 +334,9 @@ if(your_frame = null) // If that job ha @@
 return your_frame; // your_frame is returned as the frame to be rendered
+}
 // This figures out how much of the job is done, where jobnum corresponds to the job number
 // This uses pointers, so when it is run it updates certain values in memory
 void status_report_generator(){
@@ @@ -518,12 +419,100 @@ jobnum++; @@
 /*
 Slave execution code lies below
  * --------------------------------------------------------------------
  * Slave code resides below.
+ *
  * Slave listens on server for a command in the format of each function...
  * We need if's for returns... ==> watchdog
 */
 Slave listens on server for a command in the format of each function...
 We need if's for returns... ==> watchdog
 */
 // Registration on server. Needs attention. Prevent account spamming.
 // Key transfer?
 // Set up something like: distrend -c username email@example.com
 void registeruser(char *username, char *email){
   // Logs into sandboxed user on zserver2 and registers a user. Should eventually generate a key on the server and return it to the user.
   // All created user accounts should be sandboxed accordingly, requiring a different skel, and the default shell to be rbash. Also,
   // a custom path defined in the .bash_profile of the skel is needed.
   char buf[10];
   struct execio *testrem;
   char *execargv[] =
+    {
   "ssh",
   "distren_setup@protofusion.org",
   "-i",
   "setup.rsa", // default distributed key, account can only create users.
   "-p",
   "23",
   "sudo /usr/sbin/useradd",
   "-M",
   "-c",
   email,
   "-d",
   "/home/distren",
   "--gid",
   "541", // Add in shellscript to generate ssh key and return it to the user somehow
   username,
   (char *)NULL
   };
   size_t readlen;
   fprintf(stderr, "Opening stream:\n", execio_open(&testrem, "ssh", execargv));
   buf[9] = '\0'; // null-terminating the array...
   while(!execio_read(testrem, buf, 9, &readlen)) // What's with the readlen stuff?
+    {
       if(readlen > 9) {
 	fprintf(stderr, "!!!! Something is terribly wrong!\n");
+      }
       if(buf == 0) {
 	fprintf(stderr, "Make this throw a successfull message if no output is returned... maybe");
+      }
     buf[readlen] = '\0'; // Null-terminating the end of it again based on how large the data is?
     fprintf(stderr, "read \"%s\"\n", buf);
+    }
   execio_close(testrem);
+}
 void loginuser(char *username, int secret){
   // Logs into sandboxed user on zserver2 as a client, currently does nothing
   char buf[10];
   struct execio *testrem;
   char *execargv[] =
+    {
   "ssh",
   "username@protofusion.org", // username must be read from the conf
   "-i",
   "username.rsa", // Key created from registeruser()
   "-p",
   "23",
   "echo",
   "hello", // This should eventually open a non-terminating connection to the server for communication
   (char *)NULL
   };
   size_t readlen;
   fprintf(stderr, "Opening stream:\n", execio_open(&testrem, "ssh", execargv));
   buf[9] = '\0'; // null-terminating the array...
   while(!execio_read(testrem, buf, 9, &readlen)) // What's with the readlen stuff?
+    {
       if(readlen > 9) {
 	fprintf(stderr, "!!!! Something is terribly wrong!\n");
+      }
       if(buf == 0) {
 	fprintf(stderr, "Put stuff here-ish to check whether the operation(s) were successful.");
+      }
     buf[readlen] = '\0'; // Null-terminating the end of it again based on how large the data is?
     fprintf(stderr, "read \"%s\"\n", buf);
+    }
   execio_close(testrem);
+}
 // Executors
@@ @@ -536,21 +525,4 @@ void exec_blender(char *input, char *out @@
   // OHNOBINKI! ... check this... Its supposed to send a command back to the server and run the_finisher(); function which sets the frame status to complete.
   fprintf(stdin, the_finisher(frame));
 void exec_luxrender_single(char *input, char *output) {
   int ret;
   char *cmd[] = { "luxrender", "-something", "something", "something", (char *)0 };
   ret = execv("/usr/bin/luxrender", cmd);
+}
 void exec_luxrender_anim(char *input, char *output, int sframe, int eframe, int spp) {
 // spp is samples per pixel limitation on each frame
   int ret;
   char *cmd[] = { "luxrender", "-something", "something", "something", (char *)0 };
   ret = execv ("/usr/bin/luxrender", cmd);
+}
   return 0;
+}

0 comments (0 inline, 0 general)