int framenum = 0;

  char *urltoTar;      /* Full URL to the server-side location of job#.tgz */

  char *pathtoTar;     /* Full path to the location of the job#.tgz */

  char *urltoOutput;   /* Full URL where output is posted */

  char *pathtoJobfile; /* Full path to the job's main file */

  char *pathtoXml;     /* Full path to the job's xml file */

  char *pathtoOutput;  /* Full path to the output (rendered) file */

  char *outputExt;     /* Output Extension (e.g., JPG) */

  char *tarcmd;        /* Command to run for tar. Migrate to libtar sometime */

  char *outdir;        /* Output Directory for tar */

  char *jobdatapath;   /* Path to job data */

  struct distrenjob *myjob; /* Structure to hold data gathered from the XML file */

  int haveWork = 0;

  while(1)

    {

    tell_the_server(0); // Give me some work!

    /* If we got a frame */

    if(haveWork)

      {

        /* @TODO: Add remotio hooks */

        // jobnum = remoteio_read(jobnum); /* Set jobnum from remoteio (we could use info from struct, but we need this info to download the xmlfile */

        //framenum = remoteio_read(jobnum); /* Set framenum from remoteio */

        fprintf(stderr, "Preparing to render frame %d in job %d\n", framenum, jobnum);

        // Variable Preparation

        _distren_asprintf(&jobdatapath, "job%d", jobnum);

        _distren_asprintf(&urltoTar, "http://protofusion.org/distren/stor/job%d/job%d.tar.gz", jobnum); // Prepares URL to download from

        _distren_asprintf(&pathtoTar, "%s/stor/jobdata/job%d.tar.gz", datadir, jobnum); // Prepares destination to save to

        _distren_asprintf(&pathtoJobfile, "%s/%s/job.blend", datadir, jobdatapath ); // Prepares the path to the jobfile

        _distren_asprintf(&urltoOutput, "http://protofusion.org/distren/stor/tmp/", jobdatapath ); // Prepares the URL where output is posted

        _distren_asprintf(&pathtoXml, "%s/job%d/job%d.xml", datadir, jobnum ); // Prepares the path to the job's XML file

        free(jobdatapath);

        // Prepare to download the job tar if it isn't  present

        struct stat buffer;

        int fstatus = stat(pathtoJobfile, &buffer);

        if(fstatus == -1)

          {

            // Download the Tar

            if( curlget(urltoTar, pathtoTar) == 0){

              fprintf(stderr, "Job data retrieved successfully\n");

              free(urltoTar);

            }

            else {

              fprintf(stderr, "Downloading job data from server failed. Check your network connection.\n");

              return 1; // for now

            }

          }

        else

          fprintf(stderr, "Using cached job file...\n");

        _distren_asprintf(&outdir, "/tmp/distren/job%d", jobnum); /*< @TODO: free() */

        mkdir("/tmp/distren", 0750); /* @TODO: Make this less *nix-specific */

        mkdir(outdir, 0750);

        _distren_asprintf(&tarcmd, "tar -xvf \"%s\" -C \"%s\"", pathtoTar, outdir); /* @TODO: Make this portable. Libtar or something? */

        system(tarcmd);

        free(tarcmd);

        free(pathtoTar);

        free(outdir);

        /* Parses a job's XML file, puts data in the myjob struct */

        if(xml2distrenjob(&myjob, pathtoXml) == 0)

          {

            fprintf(stderr, "Well, the XML craziness may have worked. Maybe. \n");

            free(pathtoXml);

            /* Frees things up if it was successful. xml2distrenjob() really (usually) only fails if malloc'ing inside it fails */

            distrenjob_free(&myjob);

          }

        else

          {

            fprintf(stderr, "I think the XML craziness may have failed, so I'll terminate just for fun.\n");

            return 1;

          }

        /* Variable-fillers which require XML */

        outputExt = myjob->output_format; /* @TODO: FIXME! <-- I WILL! */

        /* Prepares the path to the jobfile */

        _distren_asprintf(&pathtoOutput, "%s/job%d/output/job%d-frame%d.%s", datadir, jobnum, jobnum, framenum, outputExt );

        free(outputExt);

        /* Execute blender */

        exec_blender(pathtoJobfile, pathtoOutput, framenum); /* @TODO: This warning should be fixed :D */

        free(pathtoJobfile);

        /* When blender is finished, run this... */

        fprintf(stderr, "Finished frame %d in job %d, uploading...", framenum, jobnum);

        free(urltoOutput);

        free(pathtoOutput);

        tell_the_server(DISTREN_REQUEST_DONEFRAME); /* Tells the server that it's done rendering, and upload is done */

        /* Slave now becomes idle, doesn't need to tell the server anything, ssh handles this. */

      }

    else

      fprintf(stderr,"Nothing to do. Idling...\n");

    // If the server says that every frame for the last jobnum is finished, OR if the data is getting old

    if(1 == 0){

      delete_jobdata(jobnum, datadir);

    }

    sleep(5); // Poll 5 seconds. @TODO: Remove all polling

  }

  return 0;

}

/** Stub for deleting job data from the disk. @TODO: unstubify me! */

int delete_jobdata(int jobnum, char *datadir)

{

  char *jobpath;

  _distren_asprintf(&jobpath, "%s/%d", datadir, jobnum);

  rmdir(jobpath);

  fprintf(stderr, "I just failed to remove all of your job data because I can only delete empty directories! Haha!\nPlease contact the dev team :D\n\tWe'd be overjoyed to know that someone was willing to try to use this in this devel/design/planning stage ;-)\n");

  return 0;

}

/** Stub stub stubbiness ugh @TODO: Kill me. */

void tell_the_server(int stuff){

}

/** Function referenced by curlget() to write data to disk. */

size_t curl_writetodisk(void *ptr, size_t size, size_t nmemb, FILE *stream)

 {

    return fwrite(ptr, size, nmemb, stream);

  }

/** Helper function for cURL's progress display */

int curl_progress( char *Bar,double t,double d,double ultotal,double ulnow)

{

fprintf(stderr,"Downloading: %f%% complete\r",d/t*100);

return 0;

}

/** Retrieves a URL with cURL and saves it to disk */

int curlget(char *url, char *out){

  fprintf(stderr,"Preparing to download %s",url);

  double *Bar; // Stores cURL progress display info

  CURL *curl;

  CURLcode res;

  FILE *outfile;

  curl = curl_easy_init();

  if(curl) {

	outfile = fopen(out, "w"); // Open where we're writing to

  curl_easy_setopt(curl, CURLOPT_URL, url);

  curl_easy_setopt(curl, CURLOPT_WRITEDATA, outfile);

  curl_easy_setopt(curl, CURLOPT_WRITEFUNCTION, curl_writetodisk); // this MUST be set for win32 compat.

  curl_easy_setopt(curl, CURLOPT_NOPROGRESS, 0);

  curl_easy_setopt(curl, CURLOPT_PROGRESSFUNCTION, curl_progress);

  curl_easy_setopt(curl, CURLOPT_PROGRESSDATA, &Bar);

  res = curl_easy_perform(curl);

  curl_easy_cleanup(curl);

  }

  fprintf(stderr,"\n"); // Clears out he progressbar's carriage return

  return res; // 0 means OK, nonzero means AAAH badness

}

/** Posts a file to a url with cUrl */

int curlpost(char *filename, char *url){

  char *targetname = "uploadedfile"; // Name of the target in the php file on the server (Don't change me unless you have different PHP code)

  CURL *curl;

  CURLcode res;

  struct curl_httppost *formpost=NULL;

  struct curl_httppost *lastptr=NULL;

  struct curl_slist *headerlist=NULL;

  static const char buf[] = "Expect:";

  curl_global_init(CURL_GLOBAL_ALL);

  /* upload field... */

  curl_formadd(&formpost,

               &lastptr,

               CURLFORM_COPYNAME, targetname,

               CURLFORM_FILE, filename,

               CURLFORM_END);

  /* filename field... */

  curl_formadd(&formpost,

               &lastptr,

               CURLFORM_COPYNAME, "filename",

               CURLFORM_COPYCONTENTS, filename,

               CURLFORM_END);

  /* submit field, not usually needed, just in case... */

  curl_formadd(&formpost,

               &lastptr,

               CURLFORM_COPYNAME, "submit",

               CURLFORM_COPYCONTENTS, "send",

               CURLFORM_END);

  curl = curl_easy_init();

  headerlist = curl_slist_append(headerlist, buf);

  if(curl) {

    /* Setting the URL to get the post, and the contents of the post */

    curl_easy_setopt(curl, CURLOPT_URL, url);

    curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost);

    res = curl_easy_perform(curl);

    curl_easy_cleanup(curl);

    /* cleanup the formpost junk */

    curl_formfree(formpost);

    curl_slist_free_all (headerlist);

  }

}

/** Logs the user into the server after ensuring that keys exist */

int login_user(char *username)

{

  // @TODO: Put some telnet-style auth code here

  return 1; // success

}

/** Replaces !username with a username in the slave's conf file */

int conf_replace(char *username){

  int maxlinelen = 120;

  char *fileOrig = SYSCONFDIR "/distrenslave.conf";

  char *fileRepl = SYSCONFDIR "/distrenslave.conf.edited";

  char *text2find = "!username";

  char *text2repl = username;

  char buffer[maxlinelen+2];

  char *buff_ptr, *find_ptr;

  FILE *fp1, *fp2;

  size_t find_len = strlen(text2find);

  fp1 = fopen(fileOrig,"r");

  fp2 = fopen(fileRepl,"w");

  if (fp1 ==NULL){

    fprintf(stderr, "%s doesn't exist\n",fileOrig);

    return 0;

  }

  else if(fp2 ==NULL){

    fprintf(stderr, "Can't write a file to disk! Check permissions.\n");

    return 0;

  }

  else{

    while(fgets(buffer,maxlinelen+2,fp1))

      {

        buff_ptr = buffer;

        while ((find_ptr = strstr(buff_ptr,text2find)))

        {

           while(buff_ptr < find_ptr)

             fputc((int)*buff_ptr++,fp2);

           fputs(text2repl,fp2);

           buff_ptr += find_len;

         }

         fputs(buff_ptr,fp2);

      }

    rename(fileRepl, fileOrig);

  }

  fclose(fp2);

  fclose(fp1);

  fprintf(stderr,"Wrote conf file...\n");

return 1; // Success

}

/* Executors */

/** Executor function for Blender operations */

void exec_blender(char *input, char *output, int frame)

{

  fprintf(stderr,"Preparing to execute...\n");

  int ret;

  char *frame_str;

  /* start execio code */

  char *command = "blender"; // @TODO: append .exe if win32?

  char *cmd[] = { command, "-b", "-o", output, input, "-f", frame_str, (char *)NULL };

  char buf[10];

  struct execio *testrem;

  size_t readlen;

  _distren_asprintf(&frame_str, "%i", frame);

  ret = execio_open(&testrem, command, cmd); // This path will be absolute for testing, @TODO: should be relative to install on production

  buf[9] = '\0';

  while(!execio_read(testrem, buf, 9, &readlen))

    {

      if(readlen > 9) {

        fprintf(stderr, "Something is terribly wrong!\n");

       }

       buf[readlen] = '\0';

       fprintf(stderr, "read \"%s\"\n", buf);

       // @TODO: Better location for this code?

      tell_the_server(DISTREN_REQUEST_PROGRESS);

      fprintf(stderr, "Rendering...\n");

    }

  execio_close(testrem);

  /* end execio code */

  if(ret == 1){

    fprintf(stderr,"Error starting Blender. Check your install.\n");

  }

  else{

    fprintf(stderr,"Execution was successful.\n");