diff --git a/wsprhab-flex.brd b/wsprhab-flex.brd
--- a/wsprhab-flex.brd
+++ b/wsprhab-flex.brd
@@ -27,17 +27,17 @@
 <layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
-<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/>
 <layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
 <layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
 <layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
@@ -47,20 +47,20 @@
 <layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
 <layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
 <layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
-<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
-<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>
 <layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
-<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>
 <layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>
 <layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
-<layer number="45" name="Holes" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
 <layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
 <layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
 <layer number="48" name="Document" color="7" fill="1" visible="no" active="yes"/>
 <layer number="49" name="Reference" color="7" fill="1" visible="no" active="yes"/>
 <layer number="50" name="dxf" color="7" fill="1" visible="no" active="yes"/>
-<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="yes"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="no" active="yes"/>
 <layer number="53" name="tDXF" color="5" fill="1" visible="no" active="yes"/>
 <layer number="54" name="bDXF" color="5" fill="1" visible="no" active="yes"/>
 <layer number="55" name="Panel" color="14" fill="1" visible="no" active="yes"/>
@@ -227,15 +227,32 @@
 <wire x1="14.9731625" y1="25.4" x2="13.462" y2="23.8888375" width="0" layer="20" curve="90"/>
 <dimension x1="21.828125" y1="0.15875" x2="21.9075" y2="15.71625" x3="-2.8575" y3="7.9375" textsize="1.778" layer="108" dtype="vertical" unit="inch"/>
 <dimension x1="8.493125" y1="16.1925" x2="21.2725" y2="16.1925" x3="14.8828125" y3="-12.3825" textsize="1.778" layer="108" dtype="horizontal" unit="inch"/>
-<text x="4.98475" y="2.968625" size="0.8128" layer="22" font="vector" ratio="16" rot="MR180">vin</text>
-<circle x="19.827875" y="1.3335" radius="0.079375" width="0.4064" layer="22"/>
-<circle x="19.796125" y="0.714375" radius="0.079375" width="0.4064" layer="21"/>
-<circle x="20.462875" y="0.6985" radius="0.079375" width="0.4064" layer="21"/>
-<circle x="20.494625" y="1.317625" radius="0.079375" width="0.4064" layer="21"/>
-<text x="4.524375" y="3.81" size="0.762" layer="29" font="vector" ratio="16" rot="SR0">f3</text>
+<circle x="20.32" y="15.367" radius="0.079375" width="0.4064" layer="22"/>
+<circle x="13.462" y="9.144" radius="0.079375" width="0.4064" layer="21"/>
 <wire x1="13.462" y1="1.5111625" x2="14.9731625" y2="0" width="0" layer="20" curve="90"/>
 <wire x1="14.9731625" y1="0" x2="14.9988375" y2="0" width="0" layer="20"/>
 <wire x1="14.9988375" y1="0" x2="16.51" y2="1.5111625" width="0" layer="20" curve="90"/>
+<rectangle x1="20.955" y1="17.399" x2="21.209" y2="17.526" layer="41"/>
+<rectangle x1="19.431" y1="12.7" x2="19.685" y2="13.208" layer="41"/>
+<rectangle x1="19.431" y1="11.557" x2="19.812" y2="11.811" layer="41"/>
+<rectangle x1="18.415" y1="14.605" x2="19.05" y2="14.859" layer="41"/>
+<rectangle x1="19.431" y1="14.605" x2="19.812" y2="14.732" layer="41"/>
+<rectangle x1="17.399" y1="14.732" x2="17.526" y2="14.986" layer="41"/>
+<rectangle x1="17.399" y1="10.922" x2="17.526" y2="11.176" layer="41"/>
+<rectangle x1="18.034" y1="10.922" x2="18.161" y2="11.176" layer="41"/>
+<rectangle x1="18.415" y1="10.922" x2="18.542" y2="11.176" layer="41"/>
+<rectangle x1="19.431" y1="11.176" x2="19.812" y2="11.303" layer="41"/>
+<rectangle x1="19.431" y1="11.684" x2="20.955" y2="12.7" layer="41"/>
+<rectangle x1="18.542" y1="9.906" x2="19.812" y2="11.176" layer="41"/>
+<rectangle x1="17.526" y1="14.605" x2="18.542" y2="16.002" layer="41"/>
+<rectangle x1="19.05" y1="14.605" x2="20.32" y2="16.002" layer="41"/>
+<rectangle x1="20.32" y1="8.509" x2="20.955" y2="8.636" layer="41"/>
+<rectangle x1="17.526" y1="9.779" x2="18.034" y2="11.303" layer="41"/>
+<rectangle x1="11.303" y1="8.255" x2="11.684" y2="8.382" layer="42"/>
+<text x="20.32" y="18.923" size="1.27" layer="21">+</text>
+<text x="20.574" y="20.574" size="1.27" layer="21" rot="R90">_</text>
+<text x="21.209" y="18.923" size="1.27" layer="22" rot="MR0">+</text>
+<text x="20.955" y="20.574" size="1.27" layer="22" rot="MR90">_</text>
 </plain>
 <libraries>
 <library name="Protofusion">
@@ -825,8 +842,8 @@ 0603, surface mount.
 <smd name="16_SDA2" x="-4.75" y="-2.2" dx="1.8" dy="0.8" layer="1"/>
 <smd name="17_SCL2" x="-4.75" y="-3.3" dx="1.8" dy="0.8" layer="1"/>
 <smd name="18_RESERVED" x="-4.75" y="-4.35" dx="1.8" dy="0.7" layer="1"/>
-<text x="3" y="-3.85" size="0.6096" layer="21" rot="R90">ublox</text>
-<text x="0.15" y="-1.35" size="0.6096" layer="21" rot="R90">MAX-6</text>
+<text x="-0.81" y="-1.31" size="0.6096" layer="51" rot="R90">ublox</text>
+<text x="0.15" y="-1.35" size="0.6096" layer="51" rot="R90">MAX-8</text>
 </package>
 </packages>
 </library>
@@ -907,8 +924,8 @@ 0603, surface mount.
 <pad name="1" x="-6.25" y="0" drill="0.9"/>
 <pad name="2" x="6.25" y="0" drill="0.9"/>
 <circle x="0" y="0" radius="6.25" width="0.127" layer="51"/>
-<text x="-7.62" y="-2.54" size="1.5" layer="21">+</text>
-<text x="6.35" y="-2.54" size="1.5" layer="21">-</text>
+<text x="-7.874" y="-1.524" size="1.27" layer="21">+</text>
+<text x="7.874" y="-1.524" size="1.27" layer="21" rot="R90">-</text>
 </package>
 <package name="0603-CAP">
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
@@ -1071,8 +1088,8 @@ Please make sure your boards conform to 
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkAngle" value="1"/>
 <param name="checkFont" value="1"/>
-<param name="checkRestrict" value="1"/>
-<param name="checkStop" value="1"/>
+<param name="checkRestrict" value="0"/>
+<param name="checkStop" value="0"/>
 <param name="checkValues" value="0"/>
 <param name="checkNames" value="1"/>
 <param name="checkWireStubs" value="1"/>
@@ -1183,7 +1200,7 @@ Please make sure your boards conform to 
 <attribute name="PART_NUMBER" value="" x="19.431" y="3.556" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="VALUE" x="14.351" y="4.826" size="1.27" layer="27" rot="R270"/>
 </element>
-<element name="U$3" library="Protofusion" package="FEATHERHAB-ALPHA" value="" x="19.58975" y="17.43075" smashed="yes" rot="MR0"/>
+<element name="U$3" library="Protofusion" package="FEATHERHAB-ALPHA" value="" x="19.58975" y="17.30375" smashed="yes" rot="MR0"/>
 <element name="PAD1" library="wirepad" package="1,6/0,9" value="WIREPAD1,6/0,9" x="14.986" y="23.891875" smashed="yes">
 <attribute name="VALUE" x="14.986" y="24.491875" size="0.0254" layer="27"/>
 </element>
@@ -1320,13 +1337,13 @@ Please make sure your boards conform to 
 <attribute name="VALUE" x="14.478" y="16.764" size="0.8128" layer="27" font="vector" ratio="16"/>
 <attribute name="VOLTAGE" value="" x="15.494" y="18.034" size="1.778" layer="27" display="off"/>
 </element>
-<element name="R1" library="Protofusion-passives" package="0402-RES" value="1K" x="15.748" y="5.969" smashed="yes" rot="R180">
-<attribute name="DIGIKEY_PART_NUMBER" value="" x="15.748" y="5.969" size="1.778" layer="27" rot="R180" display="off"/>
-<attribute name="MANUFACTURER" value="" x="15.748" y="5.969" size="1.778" layer="27" rot="R180" display="off"/>
-<attribute name="NAME" x="16.764" y="5.461" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
-<attribute name="PART_NUMBER" value="" x="15.748" y="5.969" size="1.778" layer="27" rot="R180" display="off"/>
-<attribute name="TOLERANCE" value="" x="15.748" y="5.969" size="1.778" layer="27" rot="R180" display="off"/>
-<attribute name="VALUE" x="16.764" y="7.239" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
+<element name="R1" library="Protofusion-passives" package="0402-RES" value="1K" x="15.748" y="5.842" smashed="yes" rot="R180">
+<attribute name="DIGIKEY_PART_NUMBER" value="" x="15.748" y="5.842" size="1.778" layer="27" rot="R180" display="off"/>
+<attribute name="MANUFACTURER" value="" x="15.748" y="5.842" size="1.778" layer="27" rot="R180" display="off"/>
+<attribute name="NAME" x="16.764" y="5.334" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
+<attribute name="PART_NUMBER" value="" x="15.748" y="5.842" size="1.778" layer="27" rot="R180" display="off"/>
+<attribute name="TOLERANCE" value="" x="15.748" y="5.842" size="1.778" layer="27" rot="R180" display="off"/>
+<attribute name="VALUE" x="16.764" y="7.112" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
 </element>
 <element name="U4" library="Protofusion" package="QFN20-4X4" value="SI5351C" x="11.43" y="19.812" smashed="yes">
 <attribute name="DIGIKEY_PART_NUMBER" value="" x="11.43" y="19.812" size="1.778" layer="27" display="off"/>
@@ -1351,12 +1368,12 @@ Please make sure your boards conform to 
 <attribute name="TOLERANCE" value="" x="10.16" y="16.002" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="VALUE" x="8.89" y="17.018" size="0.8128" layer="27" font="vector" ratio="16" rot="R270"/>
 </element>
-<element name="D1" library="Protofusion" package="LED-0603" value="" x="18.288" y="5.969" smashed="yes">
-<attribute name="DIGIKEY_PART_NUMBER" value="" x="18.288" y="5.969" size="1.778" layer="27" display="off"/>
-<attribute name="MANUFACTURER" value="" x="18.288" y="5.969" size="1.778" layer="27" display="off"/>
-<attribute name="NAME" x="18.288" y="6.604" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center"/>
-<attribute name="PART_NUMBER" value="" x="18.288" y="5.969" size="1.778" layer="27" display="off"/>
-<attribute name="VALUE" x="18.288" y="5.334" size="0.6096" layer="27" font="vector" ratio="20" align="top-center"/>
+<element name="D1" library="Protofusion" package="LED-0603" value="" x="18.288" y="5.842" smashed="yes">
+<attribute name="DIGIKEY_PART_NUMBER" value="" x="18.288" y="5.842" size="1.778" layer="27" display="off"/>
+<attribute name="MANUFACTURER" value="" x="18.288" y="5.842" size="1.778" layer="27" display="off"/>
+<attribute name="NAME" x="18.288" y="6.477" size="0.6096" layer="25" font="vector" ratio="20" align="bottom-center"/>
+<attribute name="PART_NUMBER" value="" x="18.288" y="5.842" size="1.778" layer="27" display="off"/>
+<attribute name="VALUE" x="18.288" y="5.207" size="0.6096" layer="27" font="vector" ratio="20" align="top-center"/>
 </element>
 <element name="L2" library="Protofusion-passives" package="0603-INDUCTOR" value="10uH" x="18.034" y="8.128" smashed="yes" rot="R90">
 <attribute name="DIGIKEY_PART_NUMBER" value="" x="18.034" y="8.128" size="1.778" layer="27" rot="R90" display="off"/>
@@ -1381,7 +1398,7 @@ Please make sure your boards conform to 
 <vertex x="8.128" y="25.654"/>
 <vertex x="22.352" y="25.654"/>
 <vertex x="22.352" y="-1.016"/>
-<vertex x="8.128" y="-1.016"/>
+<vertex x="8.128" y="-1.016" curve="1"/>
 </polygon>
 <polygon width="0.254" layer="16">
 <vertex x="7.747" y="26.162"/>
@@ -1422,11 +1439,8 @@ Please make sure your boards conform to 
 <contactref element="U3" pad="10_GND"/>
 <via x="9.398" y="3.937" extent="1-16" drill="0.254" diameter="0.508"/>
 <wire x1="11.499" y1="9.906" x2="12.377" y2="9.906" width="0.254" layer="1"/>
-<wire x1="17.78" y1="15.4404" x2="17.78" y2="14.478" width="0.254" layer="1"/>
 <wire x1="18.28" y1="15.4404" x2="18.28" y2="14.486" width="0.254" layer="1"/>
 <wire x1="18.28" y1="14.486" x2="18.288" y2="14.478" width="0.254" layer="1"/>
-<wire x1="19.28" y1="15.4404" x2="19.28" y2="14.454" width="0.254" layer="1"/>
-<wire x1="19.177" y1="14.351" x2="19.28" y2="14.454" width="0.254" layer="1"/>
 <wire x1="19.28" y1="10.4676" x2="19.28" y2="11.557" width="0.254" layer="1"/>
 <wire x1="19.28" y1="11.557" x2="19.28" y2="11.914" width="0.254" layer="1"/>
 <wire x1="11.43" y1="19.812" x2="12.954" y2="21.336" width="0.254" layer="1"/>
@@ -1437,31 +1451,29 @@ Please make sure your boards conform to 
 <wire x1="14.7265" y1="21.082" x2="14.4526" y2="21.3559" width="0.1524" layer="1"/>
 <via x="13.97" y="22.987" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="9.779" y="18.161" extent="1-16" drill="0.254" diameter="0.508"/>
-<via x="19.431" y="4.445" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="19.431" y="4.572" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="9.144" y="22.098" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="9.779" y="21.463" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="13.081" y="21.463" extent="1-16" drill="0.254" diameter="0.508"/>
-<via x="13.081" y="18.161" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="13.208" y="17.78" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="11.938" y="16.891" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="18.288" y="17.653" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="17.78" y1="12.954" x2="19.177" y2="14.351" width="0.1524" layer="1"/>
 <via x="13.2715" y="13.2715" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="17.78" y1="10.4676" x2="17.78" y2="12.954" width="0.254" layer="1"/>
+<wire x1="17.78" y1="10.4676" x2="17.78" y2="12.827" width="0.254" layer="1"/>
+<wire x1="17.78" y1="12.827" x2="17.78" y2="12.954" width="0.254" layer="1"/>
 <wire x1="18.78" y1="10.4676" x2="18.78" y2="11.414" width="0.254" layer="1"/>
 <wire x1="18.923" y1="11.557" x2="19.28" y2="11.557" width="0.254" layer="1"/>
 <wire x1="18.78" y1="11.414" x2="18.923" y2="11.557" width="0.254" layer="1"/>
 <wire x1="17.78" y1="12.954" x2="18.78" y2="11.954" width="0.254" layer="1"/>
 <wire x1="18.78" y1="11.954" x2="18.78" y2="11.414" width="0.254" layer="1"/>
-<via x="19.812" y="16.002" extent="1-16" drill="0.254" diameter="0.508"/>
-<via x="15.748" y="6.6675" extent="1-16" drill="0.254" diameter="0.508"/>
-<via x="13.716" y="8.89" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="19.685" y="16.256" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="16.256" y="6.6675" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="13.97" y="8.763" extent="1-16" drill="0.254" diameter="0.508"/>
 <wire x1="17.78" y1="12.954" x2="18.24" y2="12.954" width="0.1524" layer="1"/>
 <wire x1="18.24" y1="12.954" x2="18.9625" y2="12.2315" width="0.1524" layer="1"/>
-<wire x1="18.9625" y1="12.2315" x2="19.2165" y2="11.9775" width="0.1524" layer="1"/>
+<wire x1="18.9625" y1="12.2315" x2="19.153" y2="12.041" width="0.1524" layer="1"/>
 <wire x1="19.2165" y1="11.9775" x2="19.28" y2="11.914" width="0.1524" layer="1"/>
-<wire x1="20.2664" y1="12.454" x2="19.185" y2="12.454" width="0.254" layer="1"/>
 <wire x1="19.185" y1="12.454" x2="18.9625" y2="12.2315" width="0.254" layer="1"/>
-<wire x1="20.2664" y1="11.954" x2="19.24" y2="11.954" width="0.254" layer="1"/>
 <wire x1="19.24" y1="11.954" x2="19.2165" y2="11.9775" width="0.254" layer="1"/>
 <via x="17.526" y="16.383" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="16.002" y="22.987" extent="1-16" drill="0.254" diameter="0.508"/>
@@ -1473,11 +1485,38 @@ Please make sure your boards conform to 
 <via x="15.113" y="15.113" extent="1-16" drill="0.254" diameter="0.508"/>
 <wire x1="17.78" y1="12.954" x2="15.621" y2="15.113" width="0.254" layer="1"/>
 <wire x1="15.621" y1="15.113" x2="15.113" y2="15.113" width="0.254" layer="1"/>
-<via x="12.5095" y="12.6365" extent="1-16" drill="0.254" diameter="0.508"/>
-<via x="16.51" y="6.6675" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="14.986" y="6.6675" extent="1-16" drill="0.254" diameter="0.508"/>
 <via x="17.145" y="8.128" extent="1-16" drill="0.254" diameter="0.508"/>
-<via x="17.145" y="6.9215" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="17.526" y="4.826" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="15.621" y="10.795" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="17.399" y="17.653" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="20.828" y="18.034" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="20.828" y="22.098" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="11.557" y="3.7465" extent="1-16" drill="0.254" diameter="0.508"/>
+<via x="15.367" y="8.763" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="12.954" y1="18.288" x2="13.208" y2="18.034" width="0.1524" layer="1"/>
+<wire x1="13.208" y1="18.034" x2="13.208" y2="17.78" width="0.1524" layer="1"/>
+<via x="13.2715" y="12.6365" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="20.2664" y1="12.454" x2="19.185" y2="12.454" width="0.254" layer="1"/>
+<wire x1="20.2664" y1="11.954" x2="19.24" y2="11.954" width="0.254" layer="1"/>
+<wire x1="19.2165" y1="11.9775" x2="19.153" y2="12.041" width="0.254" layer="1"/>
+<wire x1="17.78" y1="12.954" x2="18.685" y2="12.954" width="0.254" layer="1"/>
+<wire x1="18.685" y1="12.954" x2="19.185" y2="12.454" width="0.254" layer="1"/>
+<wire x1="17.78" y1="15.4404" x2="17.78" y2="14.224" width="0.254" layer="1"/>
+<wire x1="17.78" y1="15.4404" x2="17.78" y2="16.129" width="0.254" layer="1"/>
+<wire x1="17.78" y1="16.129" x2="17.526" y2="16.383" width="0.254" layer="1"/>
+<wire x1="17.7165" y1="16.1925" x2="17.526" y2="16.383" width="0.254" layer="1"/>
+<wire x1="18.28" y1="15.4404" x2="18.28" y2="16.01" width="0.254" layer="1"/>
+<wire x1="17.907" y1="16.383" x2="17.526" y2="16.383" width="0.254" layer="1"/>
+<wire x1="18.28" y1="16.01" x2="17.907" y2="16.383" width="0.1524" layer="1"/>
+<wire x1="19.28" y1="15.4404" x2="19.28" y2="16.105" width="0.254" layer="1"/>
+<wire x1="19.431" y1="16.256" x2="19.28" y2="16.105" width="0.254" layer="1"/>
+<wire x1="19.431" y1="16.256" x2="19.685" y2="16.256" width="0.254" layer="1"/>
+<wire x1="19.28" y1="15.4404" x2="19.28" y2="14.327" width="0.254" layer="1"/>
+<wire x1="19.28" y1="14.327" x2="17.78" y2="12.827" width="0.254" layer="1"/>
+<wire x1="17.78" y1="12.954" x2="17.907" y2="13.081" width="0.254" layer="1"/>
+<wire x1="17.78" y1="12.954" x2="17.78" y2="12.978" width="0.254" layer="1"/>
+<via x="11.557" y="7.366" extent="1-16" drill="0.254" diameter="0.508"/>
 </signal>
 <signal name="TIMEPULSE">
 <contactref element="U4" pad="P$6"/>
@@ -1487,50 +1526,57 @@ Please make sure your boards conform to 
 <wire x1="10.922" y1="16.9545" x2="10.4935" y2="17.383" width="0.1524" layer="1"/>
 <wire x1="10.922" y1="16.9545" x2="10.922" y2="16.764" width="0.1524" layer="1"/>
 <via x="10.922" y="16.764" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="19.736" y1="11.26" x2="18.626" y2="11.26" width="0.1524" layer="16"/>
-<wire x1="16.637" y1="9.271" x2="14.0335" y2="9.271" width="0.1524" layer="16"/>
-<wire x1="18.626" y1="11.26" x2="16.637" y2="9.271" width="0.1524" layer="16"/>
-<wire x1="14.0335" y1="9.271" x2="13.716" y2="9.5885" width="0.1524" layer="16"/>
+<wire x1="13.1445" y1="9.271" x2="17.526" y2="9.271" width="0.1524" layer="16"/>
 <wire x1="12.319" y1="15.367" x2="10.922" y2="16.764" width="0.1524" layer="16"/>
-<wire x1="12.319" y1="13.5255" x2="12.319" y2="15.367" width="0.1524" layer="16"/>
-<wire x1="13.716" y1="9.5885" x2="13.716" y2="12.1285" width="0.1524" layer="16"/>
-<wire x1="13.716" y1="12.1285" x2="12.319" y2="13.5255" width="0.1524" layer="16"/>
+<wire x1="12.319" y1="10.0965" x2="12.319" y2="15.367" width="0.1524" layer="16"/>
+<wire x1="13.1445" y1="9.271" x2="12.319" y2="10.0965" width="0.1524" layer="16"/>
+<wire x1="18.415" y1="10.16" x2="18.415" y2="10.795" width="0.1524" layer="16"/>
+<wire x1="18.415" y1="10.795" x2="18.626" y2="11.006" width="0.1524" layer="16"/>
+<wire x1="19.482" y1="11.006" x2="18.626" y2="11.006" width="0.1524" layer="16"/>
+<wire x1="19.482" y1="11.006" x2="19.736" y2="11.26" width="0.1524" layer="16"/>
+<wire x1="17.526" y1="9.271" x2="18.415" y2="10.16" width="0.1524" layer="16"/>
 </signal>
 <signal name="SWCLK">
 <contactref element="J2" pad="3"/>
 <contactref element="U2" pad="22"/>
 <wire x1="13.526" y1="5.1" x2="14.06694375" y2="5.1" width="0.1524" layer="1"/>
-<wire x1="14.06694375" y1="5.1" x2="14.17394375" y2="5.207" width="0.1524" layer="1"/>
-<wire x1="14.17394375" y1="5.207" x2="17.272" y2="5.207" width="0.1524" layer="1"/>
-<wire x1="18.161" y1="4.318" x2="17.272" y2="5.207" width="0.1524" layer="1"/>
-<wire x1="18.161" y1="3.556" x2="18.161" y2="4.318" width="0.1524" layer="1"/>
+<wire x1="14.06694375" y1="5.1" x2="14.23744375" y2="5.2705" width="0.1524" layer="1"/>
+<wire x1="17.907" y1="4.15925" x2="17.78" y2="4.28625" width="0.1524" layer="1"/>
+<wire x1="17.907" y1="4.15925" x2="17.907" y2="3.81" width="0.1524" layer="1"/>
+<wire x1="17.907" y1="3.81" x2="18.161" y2="3.556" width="0.1524" layer="1"/>
+<wire x1="14.23744375" y1="5.2705" x2="16.256" y2="5.2705" width="0.1524" layer="1"/>
+<wire x1="17.24025" y1="4.28625" x2="17.78" y2="4.28625" width="0.1524" layer="1"/>
+<wire x1="16.256" y1="5.2705" x2="17.24025" y2="4.28625" width="0.1524" layer="1"/>
 </signal>
 <signal name="SWDIO">
 <contactref element="J2" pad="4"/>
 <contactref element="U2" pad="21"/>
-<wire x1="12.926" y1="4.5" x2="14.025" y2="4.5" width="0.1524" layer="1"/>
-<wire x1="14.4021" y1="4.8771" x2="16.3319" y2="4.8771" width="0.1524" layer="1"/>
-<wire x1="14.025" y1="4.5" x2="14.4021" y2="4.8771" width="0.1524" layer="1"/>
-<wire x1="16.3319" y1="4.8771" x2="16.891" y2="4.318" width="0.1524" layer="1"/>
-<wire x1="16.891" y1="4.318" x2="16.891" y2="3.556" width="0.1524" layer="1"/>
+<wire x1="14.152" y1="4.5" x2="13.716" y2="4.5" width="0.1524" layer="1"/>
+<wire x1="14.5415" y1="4.8895" x2="16.1925" y2="4.8895" width="0.1524" layer="1"/>
+<wire x1="14.152" y1="4.5" x2="14.5415" y2="4.8895" width="0.1524" layer="1"/>
+<wire x1="16.891" y1="4.191" x2="16.891" y2="3.556" width="0.1524" layer="1"/>
+<wire x1="16.891" y1="4.191" x2="16.1925" y2="4.8895" width="0.1524" layer="1"/>
+<wire x1="12.926" y1="4.5" x2="13.716" y2="4.5" width="0.1524" layer="1"/>
 </signal>
 <signal name="N$2">
 <contactref element="R1" pad="1"/>
 <contactref element="D1" pad="A"/>
-<wire x1="16.198" y1="5.969" x2="17.411" y2="5.969" width="0.1524" layer="1"/>
+<wire x1="17.411" y1="5.842" x2="16.198" y2="5.842" width="0.1524" layer="1"/>
 </signal>
 <signal name="SCL">
 <contactref element="U4" pad="P$4"/>
 <contactref element="R3" pad="1"/>
 <contactref element="U2" pad="19"/>
-<wire x1="11.938" y1="5.588" x2="11.926" y2="5.576" width="0.1524" layer="1"/>
-<wire x1="11.926" y1="4.5" x2="11.926" y2="5.576" width="0.1524" layer="1"/>
-<via x="11.938" y="5.588" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="11.8745" y1="8.1915" x2="11.8745" y2="5.6515" width="0.1524" layer="16"/>
-<wire x1="11.8745" y1="5.6515" x2="11.938" y2="5.588" width="0.1524" layer="16"/>
+<wire x1="12.3825" y1="6.2865" x2="12.5095" y2="6.1595" width="0.1524" layer="1"/>
+<wire x1="12.5095" y1="6.1595" x2="12.5095" y2="5.5245" width="0.1524" layer="1"/>
+<wire x1="12.5095" y1="5.5245" x2="11.926" y2="4.941" width="0.1524" layer="1"/>
+<wire x1="11.926" y1="4.5" x2="11.926" y2="4.941" width="0.1524" layer="1"/>
+<via x="12.3825" y="6.2865" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="12.2555" y1="8.4455" x2="12.2555" y2="6.4135" width="0.1524" layer="16"/>
+<wire x1="12.2555" y1="6.4135" x2="12.3825" y2="6.2865" width="0.1524" layer="16"/>
 <via x="9.398" y="17.0815" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="11.3665" y1="14.986" x2="11.3665" y2="8.6995" width="0.1524" layer="16"/>
-<wire x1="11.8745" y1="8.1915" x2="11.3665" y2="8.6995" width="0.1524" layer="16"/>
+<wire x1="11.3665" y1="14.986" x2="11.3665" y2="9.3345" width="0.1524" layer="16"/>
+<wire x1="12.2555" y1="8.4455" x2="11.3665" y2="9.3345" width="0.1524" layer="16"/>
 <wire x1="9.465" y1="19.312" x2="9.4606" y2="19.3076" width="0.1524" layer="1"/>
 <wire x1="9.4606" y1="19.3076" x2="9.0053125" y2="19.3076" width="0.1524" layer="1"/>
 <wire x1="9.0053125" y1="19.3076" x2="8.8392" y2="19.1414875" width="0.1524" layer="1"/>
@@ -1552,15 +1598,17 @@ Please make sure your boards conform to 
 <wire x1="9.202" y1="17.976" x2="9.202" y2="18.812" width="0.1524" layer="1"/>
 <wire x1="10.0965" y1="17.0815" x2="10.0965" y2="16.452" width="0.1524" layer="1"/>
 <wire x1="10.16" y1="16.452" x2="10.0965" y2="16.452" width="0.1524" layer="1"/>
-<wire x1="12.446" y1="6.096" x2="12.426" y2="6.076" width="0.1524" layer="1"/>
-<wire x1="12.426" y1="6.076" x2="12.426" y2="4.5" width="0.1524" layer="1"/>
-<via x="12.446" y="6.096" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="12.446" y1="6.096" x2="12.1793" y2="6.3627" width="0.1524" layer="16"/>
+<wire x1="12.7635" y1="6.858" x2="12.8905" y2="6.731" width="0.1524" layer="1"/>
+<wire x1="12.8905" y1="6.731" x2="12.8905" y2="5.3975" width="0.1524" layer="1"/>
+<wire x1="12.8905" y1="5.3975" x2="12.426" y2="4.933" width="0.1524" layer="1"/>
+<wire x1="12.426" y1="4.933" x2="12.426" y2="4.5" width="0.1524" layer="1"/>
+<via x="12.7635" y="6.858" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="12.7635" y1="6.858" x2="12.7508" y2="6.8707" width="0.1524" layer="16"/>
 <wire x1="10.0965" y1="17.0815" x2="9.202" y2="17.976" width="0.1524" layer="1"/>
 <via x="10.0965" y="17.0815" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="11.6713" y1="8.82575625" x2="12.1793" y2="8.31775625" width="0.1524" layer="16"/>
-<wire x1="11.6713" y1="15.11225625" x2="11.6713" y2="8.82575625" width="0.1524" layer="16"/>
-<wire x1="12.1793" y1="8.31775625" x2="12.1793" y2="6.3627" width="0.1524" layer="16"/>
+<wire x1="11.6713" y1="9.58775625" x2="12.7508" y2="8.50825625" width="0.1524" layer="16"/>
+<wire x1="11.6713" y1="15.11225625" x2="11.6713" y2="9.58775625" width="0.1524" layer="16"/>
+<wire x1="12.7508" y1="8.50825625" x2="12.7508" y2="6.8707" width="0.1524" layer="16"/>
 <wire x1="10.0965" y1="17.0815" x2="10.0965" y2="16.0655" width="0.1524" layer="16"/>
 <wire x1="10.7188" y1="15.4432" x2="11.34035625" y2="15.4432" width="0.1524" layer="16"/>
 <wire x1="10.0965" y1="16.0655" x2="10.7188" y2="15.4432" width="0.1524" layer="16"/>
@@ -1643,69 +1691,76 @@ Please make sure your boards conform to 
 <wire x1="11.43" y1="22.4028" x2="13.5382" y2="22.4028" width="0.1524" layer="1"/>
 <wire x1="13.5382" y1="22.4028" x2="13.843" y2="22.098" width="0.1524" layer="1"/>
 <wire x1="11.43" y1="21.777" x2="11.43" y2="22.4028" width="0.1524" layer="1"/>
-<via x="20.193" y="4.445" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="20.574" y1="5.392" x2="20.574" y2="4.8205" width="0.254" layer="1"/>
-<wire x1="20.574" y1="4.8205" x2="20.1985" y2="4.445" width="0.254" layer="1"/>
-<wire x1="20.193" y1="4.445" x2="20.1985" y2="4.445" width="0.254" layer="1"/>
-<wire x1="20.193" y1="4.445" x2="20.447" y2="4.191" width="0.254" layer="1"/>
-<wire x1="20.447" y1="4.191" x2="20.447" y2="3.8735" width="0.254" layer="1"/>
+<via x="20.193" y="4.572" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="20.574" y1="5.392" x2="20.574" y2="4.9475" width="0.254" layer="1"/>
+<wire x1="20.574" y1="4.9475" x2="20.1985" y2="4.572" width="0.254" layer="1"/>
+<wire x1="20.193" y1="4.572" x2="20.1985" y2="4.572" width="0.254" layer="1"/>
+<wire x1="20.193" y1="4.572" x2="20.447" y2="4.318" width="0.254" layer="1"/>
+<wire x1="20.447" y1="4.318" x2="20.447" y2="3.8735" width="0.254" layer="1"/>
 <wire x1="20.701" y1="3.6195" x2="20.447" y2="3.8735" width="0.254" layer="1"/>
 <wire x1="20.701" y1="3.6195" x2="20.701" y2="3.556" width="0.254" layer="1"/>
-<via x="14.351" y="18.161" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="20.2664" y1="14.454" x2="20.2664" y2="15.6944" width="0.254" layer="1"/>
-<wire x1="20.2664" y1="15.6944" x2="20.574" y2="16.002" width="0.254" layer="1"/>
-<via x="20.574" y="16.002" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="20.562" y1="17.018" x2="20.562" y2="16.014" width="0.254" layer="1"/>
-<wire x1="20.562" y1="16.014" x2="20.574" y2="16.002" width="0.254" layer="1"/>
+<via x="14.351" y="18.034" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="20.2664" y1="14.454" x2="20.55" y2="14.454" width="0.254" layer="1"/>
+<wire x1="20.574" y1="14.478" x2="20.55" y2="14.454" width="0.254" layer="1"/>
+<wire x1="20.574" y1="14.478" x2="20.574" y2="16.129" width="0.254" layer="1"/>
+<via x="20.574" y="16.129" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="20.562" y1="17.018" x2="20.562" y2="16.141" width="0.254" layer="1"/>
+<wire x1="20.562" y1="16.141" x2="20.574" y2="16.129" width="0.254" layer="1"/>
 <wire x1="10.16" y1="15.552" x2="9.144" y2="15.552" width="0.254" layer="1"/>
-<wire x1="20.193" y1="4.445" x2="21.082" y2="5.334" width="0.254" layer="16"/>
+<wire x1="20.193" y1="4.572" x2="21.082" y2="5.461" width="0.254" layer="16"/>
 <via x="13.843" y="22.098" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="13.843" y1="22.098" x2="13.843" y2="18.669" width="0.254" layer="16"/>
-<wire x1="13.843" y1="18.669" x2="14.351" y2="18.161" width="0.254" layer="16"/>
+<wire x1="13.843" y1="22.098" x2="13.843" y2="18.542" width="0.254" layer="16"/>
+<wire x1="13.843" y1="18.542" x2="14.351" y2="18.034" width="0.254" layer="16"/>
 <wire x1="13.395" y1="20.312" x2="13.8985" y2="20.312" width="0.254" layer="1"/>
 <wire x1="13.8985" y1="20.312" x2="14.097" y2="20.5105" width="0.254" layer="1"/>
 <wire x1="14.097" y1="20.5105" x2="14.097" y2="21.844" width="0.254" layer="1"/>
 <wire x1="14.097" y1="21.844" x2="13.843" y2="22.098" width="0.254" layer="1"/>
 <wire x1="12.43" y1="17.847" x2="12.43" y2="17.339" width="0.254" layer="1"/>
 <wire x1="12.43" y1="17.339" x2="12.624" y2="17.145" width="0.254" layer="1"/>
-<wire x1="12.624" y1="17.145" x2="13.335" y2="17.145" width="0.254" layer="1"/>
-<wire x1="13.335" y1="17.145" x2="14.351" y2="18.161" width="0.254" layer="1"/>
-<wire x1="15.044" y1="18.034" x2="14.917" y2="18.161" width="0.254" layer="1"/>
-<wire x1="14.917" y1="18.161" x2="14.351" y2="18.161" width="0.254" layer="1"/>
-<wire x1="13.395" y1="18.812" x2="14.081" y2="18.812" width="0.254" layer="1"/>
-<wire x1="14.081" y1="18.812" x2="14.351" y2="18.542" width="0.254" layer="1"/>
-<wire x1="14.351" y1="18.542" x2="14.351" y2="18.161" width="0.254" layer="1"/>
+<wire x1="12.624" y1="17.145" x2="13.462" y2="17.145" width="0.254" layer="1"/>
+<wire x1="13.462" y1="17.145" x2="14.351" y2="18.034" width="0.254" layer="1"/>
+<wire x1="15.044" y1="18.034" x2="14.351" y2="18.034" width="0.254" layer="1"/>
+<wire x1="13.395" y1="18.812" x2="13.954" y2="18.812" width="0.254" layer="1"/>
+<wire x1="14.351" y1="18.415" x2="13.954" y2="18.812" width="0.254" layer="1"/>
+<wire x1="14.351" y1="18.415" x2="14.351" y2="18.034" width="0.254" layer="1"/>
 <wire x1="10.599" y1="9.906" x2="9.398" y2="9.906" width="0.254" layer="1"/>
 <wire x1="9.398" y1="9.906" x2="8.89" y2="10.414" width="0.254" layer="1"/>
 <wire x1="8.89" y1="10.414" x2="8.89" y2="13.393" width="0.254" layer="1"/>
 <wire x1="9.144" y1="13.647" x2="8.89" y2="13.393" width="0.254" layer="1"/>
 <wire x1="9.144" y1="15.552" x2="9.144" y2="13.647" width="0.254" layer="1"/>
-<wire x1="10.926" y1="4.5" x2="10.926" y2="7.747" width="0.254" layer="1"/>
-<wire x1="10.926" y1="7.747" x2="10.926" y2="8.7" width="0.254" layer="1"/>
-<wire x1="10.926" y1="7.747" x2="12.3657375" y2="7.747" width="0.254" layer="1"/>
-<wire x1="12.3657375" y1="7.747" x2="12.926" y2="8.3072625" width="0.254" layer="1"/>
+<wire x1="12.6197375" y1="8.001" x2="12.926" y2="8.3072625" width="0.254" layer="1"/>
 <wire x1="12.926" y1="8.3072625" x2="12.926" y2="8.7" width="0.254" layer="1"/>
-<wire x1="19.558" y1="17.018" x2="16.383" y2="17.018" width="0.254" layer="16"/>
-<wire x1="14.351" y1="18.161" x2="15.24" y2="18.161" width="0.254" layer="16"/>
-<wire x1="16.383" y1="17.018" x2="15.24" y2="18.161" width="0.254" layer="16"/>
-<wire x1="20.574" y1="16.002" x2="19.558" y2="17.018" width="0.254" layer="16"/>
-<wire x1="20.574" y1="16.002" x2="21.082" y2="15.494" width="0.254" layer="16"/>
-<wire x1="21.082" y1="15.494" x2="21.082" y2="9.017" width="0.254" layer="16"/>
+<wire x1="19.685" y1="17.018" x2="16.637" y2="17.018" width="0.254" layer="16"/>
+<wire x1="14.351" y1="18.034" x2="15.621" y2="18.034" width="0.254" layer="16"/>
+<wire x1="16.637" y1="17.018" x2="15.621" y2="18.034" width="0.254" layer="16"/>
+<wire x1="20.574" y1="16.129" x2="19.685" y2="17.018" width="0.254" layer="16"/>
+<wire x1="20.574" y1="16.129" x2="21.082" y2="15.621" width="0.254" layer="16"/>
+<wire x1="21.082" y1="15.621" x2="21.082" y2="9.017" width="0.254" layer="16"/>
 <wire x1="21.082" y1="9.017" x2="21.082" y2="8.001" width="0.254" layer="16"/>
 <wire x1="21.082" y1="8.001" x2="21.082" y2="6.858" width="0.254" layer="16"/>
-<wire x1="21.082" y1="6.858" x2="21.082" y2="5.334" width="0.254" layer="16"/>
+<wire x1="21.082" y1="6.858" x2="21.082" y2="5.461" width="0.254" layer="16"/>
 <wire x1="19.736" y1="9.06" x2="21.039" y2="9.06" width="0.254" layer="16"/>
 <wire x1="21.039" y1="9.06" x2="21.082" y2="9.017" width="0.254" layer="16"/>
 <wire x1="19.736" y1="7.96" x2="21.041" y2="7.96" width="0.254" layer="16"/>
 <wire x1="21.041" y1="7.96" x2="21.082" y2="8.001" width="0.254" layer="16"/>
 <wire x1="19.736" y1="6.86" x2="21.08" y2="6.86" width="0.254" layer="16"/>
 <wire x1="21.08" y1="6.86" x2="21.082" y2="6.858" width="0.254" layer="16"/>
-<wire x1="13.4366" y1="3.937" x2="12.8016" y2="3.302" width="0.254" layer="1"/>
-<wire x1="12.8016" y1="3.302" x2="10.864" y2="3.302" width="0.254" layer="1"/>
-<via x="13.4366" y="3.937" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="14.5796" y1="5.08" x2="13.4366" y2="3.937" width="0.254" layer="16"/>
-<wire x1="20.193" y1="4.445" x2="19.558" y2="5.08" width="0.254" layer="16"/>
-<wire x1="19.558" y1="5.08" x2="14.5796" y2="5.08" width="0.254" layer="16"/>
+<wire x1="13.9446" y1="3.175" x2="10.991" y2="3.175" width="0.254" layer="1"/>
+<wire x1="10.991" y1="3.175" x2="10.864" y2="3.302" width="0.254" layer="1"/>
+<via x="13.9446" y="3.175" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="13.9446" y1="3.175" x2="14.1903625" y2="2.9292375" width="0.254" layer="16"/>
+<wire x1="18.9738" y1="3.3528" x2="20.193" y2="4.572" width="0.254" layer="16"/>
+<wire x1="14.1903625" y1="2.9292375" x2="15.5022375" y2="2.9292375" width="0.254" layer="16"/>
+<wire x1="15.5022375" y1="2.9292375" x2="15.9258" y2="3.3528" width="0.254" layer="16"/>
+<wire x1="15.9258" y1="3.3528" x2="18.9738" y2="3.3528" width="0.254" layer="16"/>
+<wire x1="10.926" y1="4.5" x2="10.926" y2="5.58434375" width="0.254" layer="1"/>
+<wire x1="10.926" y1="5.58434375" x2="12.192" y2="6.85034375" width="0.254" layer="1"/>
+<wire x1="12.192" y1="6.85034375" x2="12.192" y2="8.001" width="0.254" layer="1"/>
+<wire x1="12.6197375" y1="8.001" x2="12.192" y2="8.001" width="0.254" layer="1"/>
+<wire x1="12.192" y1="8.001" x2="11.176" y2="8.001" width="0.254" layer="1"/>
+<wire x1="11.176" y1="8.001" x2="10.922" y2="8.255" width="0.254" layer="1"/>
+<wire x1="10.922" y1="8.255" x2="10.922" y2="8.696" width="0.254" layer="1"/>
+<wire x1="10.922" y1="8.696" x2="10.926" y2="8.7" width="0.254" layer="1"/>
 </signal>
 <signal name="BOOST">
 <contactref element="C2" pad="1"/>
@@ -1716,10 +1771,9 @@ Please make sure your boards conform to 
 <signal name="SWBUCK">
 <contactref element="L2" pad="2"/>
 <contactref element="U1" pad="2"/>
-<wire x1="16.78" y1="10.4676" x2="16.78" y2="9.763" width="0.254" layer="1"/>
-<wire x1="17.018" y1="9.525" x2="17.018" y2="8.878" width="0.254" layer="1"/>
-<wire x1="17.018" y1="8.878" x2="18.034" y2="8.878" width="0.254" layer="1"/>
-<wire x1="16.78" y1="9.763" x2="17.018" y2="9.525" width="0.254" layer="1"/>
+<wire x1="16.78" y1="10.4676" x2="16.78" y2="9.5605" width="0.254" layer="1"/>
+<wire x1="18.034" y1="8.878" x2="17.4625" y2="8.878" width="0.254" layer="1"/>
+<wire x1="16.78" y1="9.5605" x2="17.4625" y2="8.878" width="0.254" layer="1"/>
 </signal>
 <signal name="BUCK">
 <contactref element="C4" pad="1"/>
@@ -1745,11 +1799,11 @@ Please make sure your boards conform to 
 <signal name="VBATT+">
 <contactref element="C8" pad="1"/>
 <contactref element="U1" pad="16"/>
-<wire x1="18.78" y1="15.4404" x2="18.78" y2="16.018" width="0.254" layer="1"/>
-<wire x1="17.88" y1="16.918" x2="16.383" y2="16.918" width="0.254" layer="1"/>
-<wire x1="16.383" y1="16.918" x2="15.875" y2="16.41" width="0.254" layer="1"/>
+<wire x1="18.78" y1="15.4404" x2="18.78" y2="16.145" width="0.254" layer="1"/>
+<wire x1="17.9705" y1="16.9545" x2="16.4195" y2="16.9545" width="0.254" layer="1"/>
+<wire x1="16.4195" y1="16.9545" x2="15.875" y2="16.41" width="0.254" layer="1"/>
 <wire x1="15.875" y1="16.41" x2="14.986" y2="16.41" width="0.254" layer="1"/>
-<wire x1="18.78" y1="16.018" x2="17.88" y2="16.918" width="0.254" layer="1"/>
+<wire x1="18.78" y1="16.145" x2="17.9705" y2="16.9545" width="0.254" layer="1"/>
 </signal>
 <signal name="SOLAR+">
 <contactref element="J1" pad="1"/>
@@ -1771,8 +1825,8 @@ Please make sure your boards conform to 
 <contactref element="R1" pad="2"/>
 <contactref element="U2" pad="23"/>
 <wire x1="13.526" y1="5.6" x2="14.617" y2="5.6" width="0.1524" layer="1"/>
-<wire x1="14.986" y1="5.969" x2="15.298" y2="5.969" width="0.1524" layer="1"/>
-<wire x1="14.617" y1="5.6" x2="14.986" y2="5.969" width="0.1524" layer="1"/>
+<wire x1="14.859" y1="5.842" x2="15.298" y2="5.842" width="0.1524" layer="1"/>
+<wire x1="14.617" y1="5.6" x2="14.859" y2="5.842" width="0.1524" layer="1"/>
 </signal>
 <signal name="OSC_EN">
 <contactref element="U4" pad="P$7"/>
@@ -1784,40 +1838,46 @@ Please make sure your boards conform to 
 <via x="10.922" y="15.9385" extent="1-16" drill="0.254" diameter="0.508"/>
 <wire x1="11.31644375" y1="15.9385" x2="10.922" y2="15.9385" width="0.1524" layer="16"/>
 <wire x1="11.31644375" y1="15.9385" x2="11.9761" y2="15.27884375" width="0.1524" layer="16"/>
-<wire x1="11.9761" y1="15.27884375" x2="11.9761" y2="8.9520125" width="0.1524" layer="16"/>
-<wire x1="11.9761" y1="8.9520125" x2="12.7" y2="8.2281125" width="0.1524" layer="16"/>
-<wire x1="12.7" y1="8.2281125" x2="12.7" y2="7.112" width="0.1524" layer="16"/>
-<via x="12.7" y="7.112" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="11.9761" y1="15.27884375" x2="11.9761" y2="9.8410125" width="0.1524" layer="16"/>
+<wire x1="13.2715" y1="8.5456125" x2="11.9761" y2="9.8410125" width="0.1524" layer="16"/>
 <contactref element="U2" pad="18"/>
-<wire x1="11.426" y1="4.5" x2="11.426" y2="5.838" width="0.1524" layer="1"/>
-<wire x1="12.7" y1="7.112" x2="11.426" y2="5.838" width="0.1524" layer="1"/>
+<wire x1="12.0015" y1="5.715" x2="11.426" y2="5.1395" width="0.1524" layer="1"/>
+<via x="12.0015" y="5.715" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="11.426" y1="4.5" x2="11.426" y2="5.1395" width="0.1524" layer="1"/>
+<wire x1="12.0015" y1="5.715" x2="12.5095" y2="5.715" width="0.1524" layer="16"/>
+<wire x1="12.5095" y1="5.715" x2="13.2715" y2="6.477" width="0.1524" layer="16"/>
+<wire x1="13.2715" y1="6.477" x2="13.2715" y2="8.5456125" width="0.1524" layer="16"/>
 </signal>
 <signal name="GPS-RX">
 <contactref element="U2" pad="26"/>
 <contactref element="U3" pad="3_RXD1"/>
 <wire x1="19.736" y1="12.36" x2="19.482" y2="12.106" width="0.1524" layer="16"/>
 <wire x1="19.482" y1="12.106" x2="18.71" y2="12.106" width="0.1524" layer="16"/>
-<wire x1="14.478" y1="9.779" x2="16.383" y2="9.779" width="0.1524" layer="16"/>
-<wire x1="18.71" y1="12.106" x2="16.383" y2="9.779" width="0.1524" layer="16"/>
+<wire x1="18.71" y1="12.106" x2="18.034" y2="11.43" width="0.1524" layer="16"/>
 <via x="14.478" y="9.779" extent="1-16" drill="0.254" diameter="0.508"/>
 <wire x1="13.526" y1="7.1" x2="14.034" y2="7.1" width="0.1524" layer="1"/>
 <wire x1="14.4785" y1="7.5445" x2="14.034" y2="7.1" width="0.1524" layer="1"/>
 <wire x1="14.478" y1="9.779" x2="14.4785" y2="9.7785" width="0.1524" layer="1"/>
 <wire x1="14.4785" y1="9.7785" x2="14.4785" y2="7.5445" width="0.1524" layer="1"/>
+<wire x1="18.034" y1="11.43" x2="18.034" y2="10.33705625" width="0.1524" layer="16"/>
+<wire x1="18.034" y1="10.33705625" x2="17.47594375" y2="9.779" width="0.1524" layer="16"/>
+<wire x1="17.47594375" y1="9.779" x2="14.478" y2="9.779" width="0.1524" layer="16"/>
 </signal>
 <signal name="GPS-TX">
 <contactref element="U2" pad="25"/>
 <contactref element="U3" pad="2_TXD1"/>
 <wire x1="19.736" y1="13.46" x2="19.482" y2="13.206" width="0.1524" layer="16"/>
 <wire x1="19.482" y1="13.206" x2="18.72" y2="13.206" width="0.1524" layer="16"/>
-<wire x1="18.72" y1="13.206" x2="18.505" y2="12.991" width="0.1524" layer="16"/>
+<wire x1="18.72" y1="13.206" x2="17.653" y2="12.139" width="0.1524" layer="16"/>
 <via x="14.986" y="10.287" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="18.505" y1="12.409" x2="16.383" y2="10.287" width="0.1524" layer="16"/>
-<wire x1="16.383" y1="10.287" x2="14.986" y2="10.287" width="0.1524" layer="16"/>
+<wire x1="17.653" y1="10.541" x2="17.399" y2="10.287" width="0.1524" layer="16"/>
+<wire x1="17.399" y1="10.287" x2="14.986" y2="10.287" width="0.1524" layer="16"/>
 <wire x1="13.526" y1="6.6" x2="14.093" y2="6.6" width="0.1524" layer="1"/>
-<wire x1="14.093" y1="6.6" x2="14.986" y2="7.493" width="0.1524" layer="1"/>
-<wire x1="14.986" y1="10.287" x2="14.986" y2="7.493" width="0.1524" layer="1"/>
-<wire x1="18.505" y1="12.409" x2="18.505" y2="12.991" width="0.1524" layer="16"/>
+<wire x1="14.093" y1="6.6" x2="14.859" y2="7.366" width="0.1524" layer="1"/>
+<wire x1="14.986" y1="10.287" x2="14.986" y2="9.525" width="0.1524" layer="1"/>
+<wire x1="14.986" y1="9.525" x2="14.859" y2="9.398" width="0.1524" layer="1"/>
+<wire x1="14.859" y1="9.398" x2="14.859" y2="7.366" width="0.1524" layer="1"/>
+<wire x1="17.653" y1="10.541" x2="17.653" y2="12.139" width="0.1524" layer="16"/>
 </signal>
 <signal name="N$7">
 <contactref element="RF1" pad="FEED"/>
@@ -1829,17 +1889,19 @@ Please make sure your boards conform to 
 <contactref element="U1" pad="12"/>
 <wire x1="20.2664" y1="13.454" x2="20.8868" y2="13.454" width="0.1524" layer="1"/>
 <wire x1="20.8868" y1="13.454" x2="21.1328" y2="13.208" width="0.1524" layer="1"/>
-<wire x1="21.1328" y1="13.208" x2="21.1328" y2="5.0038" width="0.1524" layer="1"/>
-<wire x1="21.1328" y1="5.0038" x2="20.955" y2="4.826" width="0.1524" layer="1"/>
-<wire x1="20.955" y1="4.826" x2="20.955" y2="4.445" width="0.1524" layer="1"/>
-<via x="20.955" y="4.445" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="20.955" y1="4.445" x2="19.5072" y2="2.9972" width="0.1524" layer="16"/>
-<wire x1="19.5072" y1="2.9972" x2="15.2908" y2="2.9972" width="0.1524" layer="16"/>
-<wire x1="15.2908" y1="2.9972" x2="15.2816" y2="3.0064" width="0.1524" layer="16"/>
-<wire x1="9.4396" y1="3.0064" x2="9.144" y2="3.302" width="0.1524" layer="16"/>
+<wire x1="21.1328" y1="13.208" x2="21.1328" y2="4.8133" width="0.1524" layer="1"/>
+<wire x1="21.1328" y1="4.8133" x2="20.955" y2="4.6355" width="0.1524" layer="1"/>
+<wire x1="20.955" y1="4.6355" x2="20.955" y2="4.572" width="0.1524" layer="1"/>
+<via x="20.955" y="4.572" extent="1-16" drill="0.254" diameter="0.508"/>
+<wire x1="20.955" y1="4.572" x2="19.3802" y2="2.9972" width="0.1524" layer="16"/>
 <via x="9.144" y="3.302" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="15.2816" y1="3.0064" x2="9.4396" y2="3.0064" width="0.1524" layer="16"/>
+<wire x1="19.3802" y1="2.9972" x2="16.1798" y2="2.9972" width="0.1524" layer="16"/>
 <contactref element="U2" pad="15"/>
+<wire x1="9.144" y1="3.302" x2="9.398" y2="3.048" width="0.1524" layer="16"/>
+<wire x1="13.0331875" y1="3.048" x2="13.50755" y2="2.5736375" width="0.1524" layer="16"/>
+<wire x1="9.398" y1="3.048" x2="13.0331875" y2="3.048" width="0.1524" layer="16"/>
+<wire x1="13.50755" y1="2.5736375" x2="15.7562375" y2="2.5736375" width="0.1524" layer="16"/>
+<wire x1="15.7562375" y1="2.5736375" x2="16.1798" y2="2.9972" width="0.1524" layer="16"/>
 <wire x1="9.926" y1="4.5" x2="9.199" y2="4.5" width="0.1524" layer="1"/>
 <wire x1="9.199" y1="4.5" x2="8.89" y2="4.191" width="0.1524" layer="1"/>
 <wire x1="8.89" y1="4.191" x2="8.89" y2="3.556" width="0.1524" layer="1"/>
@@ -1850,26 +1912,28 @@ Please make sure your boards conform to 
 <wire x1="16.78" y1="15.4404" x2="16.78" y2="16.367" width="0.1524" layer="1"/>
 <wire x1="16.78" y1="16.367" x2="16.764" y2="16.383" width="0.1524" layer="1"/>
 <via x="16.764" y="16.383" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="16.764" y1="16.383" x2="16.4846" y2="16.6624" width="0.1524" layer="16"/>
-<wire x1="16.4846" y1="16.6624" x2="16.2357" y2="16.6624" width="0.1524" layer="16"/>
-<wire x1="16.2357" y1="16.6624" x2="15.2451" y2="17.653" width="0.1524" layer="16"/>
-<wire x1="9.271" y1="17.653" x2="8.89" y2="17.272" width="0.1524" layer="16"/>
+<wire x1="16.764" y1="16.383" x2="15.621" y2="17.526" width="0.1524" layer="16"/>
+<wire x1="15.621" y1="17.526" x2="14.1605" y2="17.526" width="0.1524" layer="16"/>
 <via x="8.89" y="8.636" extent="1-16" drill="0.254" diameter="0.508"/>
-<wire x1="15.2451" y1="17.653" x2="9.271" y2="17.653" width="0.1524" layer="16"/>
-<wire x1="8.89" y1="17.272" x2="8.89" y2="8.636" width="0.1524" layer="16"/>
 <contactref element="U2" pad="8"/>
 <wire x1="9.326" y1="8.1" x2="9.072" y2="8.1" width="0.1524" layer="1"/>
 <wire x1="8.89" y1="8.636" x2="8.89" y2="8.282" width="0.1524" layer="1"/>
 <wire x1="9.072" y1="8.1" x2="8.89" y2="8.282" width="0.1524" layer="1"/>
+<wire x1="14.1605" y1="17.526" x2="13.3985" y2="18.288" width="0.1524" layer="16"/>
+<wire x1="11.938" y1="18.288" x2="13.3985" y2="18.288" width="0.1524" layer="16"/>
+<wire x1="8.89" y1="17.272" x2="9.271" y2="17.653" width="0.1524" layer="16"/>
+<wire x1="8.89" y1="17.272" x2="8.89" y2="8.636" width="0.1524" layer="16"/>
+<wire x1="9.271" y1="17.653" x2="11.303" y2="17.653" width="0.1524" layer="16"/>
+<wire x1="11.303" y1="17.653" x2="11.938" y2="18.288" width="0.1524" layer="16"/>
 </signal>
 <signal name="EXTINT">
 <contactref element="U3" pad="5_EXTINT0"/>
 <via x="14.351" y="6.1214" extent="1-16" drill="0.254" diameter="0.508"/>
 <wire x1="19.736" y1="10.16" x2="19.482" y2="9.906" width="0.1524" layer="16"/>
 <wire x1="19.482" y1="9.906" x2="18.72" y2="9.906" width="0.1524" layer="16"/>
-<wire x1="18.72" y1="9.906" x2="18.466" y2="9.652" width="0.1524" layer="16"/>
-<wire x1="18.466" y1="9.652" x2="18.466" y2="7.544" width="0.1524" layer="16"/>
-<wire x1="18.466" y1="7.544" x2="17.0434" y2="6.1214" width="0.1524" layer="16"/>
+<wire x1="18.72" y1="9.906" x2="18.339" y2="9.525" width="0.1524" layer="16"/>
+<wire x1="18.339" y1="9.525" x2="18.339" y2="7.417" width="0.1524" layer="16"/>
+<wire x1="18.339" y1="7.417" x2="17.0434" y2="6.1214" width="0.1524" layer="16"/>
 <wire x1="17.0434" y1="6.1214" x2="14.351" y2="6.1214" width="0.1524" layer="16"/>
 <contactref element="U2" pad="24"/>
 <wire x1="13.526" y1="6.1" x2="14.3296" y2="6.1" width="0.1524" layer="1"/>
diff --git a/wsprhab-flex.sch b/wsprhab-flex.sch
--- a/wsprhab-flex.sch
+++ b/wsprhab-flex.sch
@@ -9,34 +9,34 @@
 </settings>
 <grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
 <layers>
-<layer number="1" name="Top" color="4" fill="1" visible="yes" active="no"/>
-<layer number="2" name="Route2" color="1" fill="3" visible="yes" active="no"/>
-<layer number="3" name="Route3" color="4" fill="3" visible="yes" active="no"/>
-<layer number="4" name="Route4" color="1" fill="4" visible="yes" active="no"/>
-<layer number="5" name="Route5" color="4" fill="4" visible="yes" active="no"/>
-<layer number="6" name="Route6" color="1" fill="8" visible="yes" active="no"/>
-<layer number="7" name="Route7" color="4" fill="8" visible="yes" active="no"/>
-<layer number="8" name="Route8" color="1" fill="2" visible="yes" active="no"/>
-<layer number="9" name="Route9" color="4" fill="2" visible="yes" active="no"/>
-<layer number="10" name="Route10" color="1" fill="7" visible="yes" active="no"/>
-<layer number="11" name="Route11" color="4" fill="7" visible="yes" active="no"/>
-<layer number="12" name="Route12" color="1" fill="5" visible="yes" active="no"/>
-<layer number="13" name="Route13" color="4" fill="5" visible="yes" active="no"/>
-<layer number="14" name="Route14" color="1" fill="6" visible="yes" active="no"/>
-<layer number="15" name="Route15" color="4" fill="6" visible="yes" active="no"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="no"/>
-<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="no"/>
-<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="no"/>
-<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="no"/>
-<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="no"/>
-<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="no"/>
-<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="no"/>
-<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="no"/>
-<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="no"/>
-<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="no"/>
-<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="no"/>
-<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="no"/>
-<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="no"/>
+<layer number="1" name="Top" color="4" fill="1" visible="no" active="no"/>
+<layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
+<layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
+<layer number="4" name="Route4" color="1" fill="4" visible="no" active="no"/>
+<layer number="5" name="Route5" color="4" fill="4" visible="no" active="no"/>
+<layer number="6" name="Route6" color="1" fill="8" visible="no" active="no"/>
+<layer number="7" name="Route7" color="4" fill="8" visible="no" active="no"/>
+<layer number="8" name="Route8" color="1" fill="2" visible="no" active="no"/>
+<layer number="9" name="Route9" color="4" fill="2" visible="no" active="no"/>
+<layer number="10" name="Route10" color="1" fill="7" visible="no" active="no"/>
+<layer number="11" name="Route11" color="4" fill="7" visible="no" active="no"/>
+<layer number="12" name="Route12" color="1" fill="5" visible="no" active="no"/>
+<layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
+<layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
+<layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="no"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="no" active="no"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="no" active="no"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="no"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="no" active="no"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="no"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="no"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="no"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="no"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="no" active="no"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="no" active="no"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="no" active="no"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="no" active="no"/>
 <layer number="29" name="tStop" color="7" fill="3" visible="no" active="no"/>
 <layer number="30" name="bStop" color="7" fill="6" visible="no" active="no"/>
 <layer number="31" name="tCream" color="7" fill="4" visible="no" active="no"/>
@@ -45,8 +45,8 @@
 <layer number="34" name="bFinish" color="6" fill="6" visible="no" active="no"/>
 <layer number="35" name="tGlue" color="7" fill="4" visible="no" active="no"/>
 <layer number="36" name="bGlue" color="7" fill="5" visible="no" active="no"/>
-<layer number="37" name="tTest" color="7" fill="1" visible="yes" active="no"/>
-<layer number="38" name="bTest" color="7" fill="1" visible="yes" active="no"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="no"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="no"/>
 <layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="no"/>
 <layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="no"/>
 <layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="no"/>
@@ -54,22 +54,22 @@
 <layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="no"/>
 <layer number="44" name="Drills" color="7" fill="1" visible="no" active="no"/>
 <layer number="45" name="Holes" color="7" fill="1" visible="no" active="no"/>
-<layer number="46" name="Milling" color="3" fill="1" visible="yes" active="no"/>
-<layer number="47" name="Measures" color="7" fill="1" visible="yes" active="no"/>
-<layer number="48" name="Document" color="7" fill="1" visible="yes" active="no"/>
-<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="no"/>
-<layer number="50" name="dxf" color="7" fill="1" visible="yes" active="no"/>
-<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="no"/>
-<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="no"/>
-<layer number="53" name="tGND_GNDA" color="5" fill="1" visible="yes" active="no"/>
-<layer number="54" name="bGND_GNDA" color="5" fill="1" visible="yes" active="no"/>
-<layer number="55" name="dxf2" color="14" fill="1" visible="yes" active="no"/>
-<layer number="56" name="wert" color="13" fill="1" visible="yes" active="no"/>
-<layer number="57" name="tCAD" color="7" fill="1" visible="yes" active="no"/>
-<layer number="58" name="bRefDes" color="7" fill="1" visible="yes" active="no"/>
-<layer number="59" name="tCarbon" color="11" fill="1" visible="yes" active="no"/>
-<layer number="60" name="bCarbon" color="12" fill="1" visible="yes" active="no"/>
-<layer number="61" name="pt_docu" color="12" fill="1" visible="yes" active="no"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="no"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="no"/>
+<layer number="48" name="Document" color="7" fill="1" visible="no" active="no"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="no" active="no"/>
+<layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="no"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="no" active="no"/>
+<layer number="53" name="tGND_GNDA" color="5" fill="1" visible="no" active="no"/>
+<layer number="54" name="bGND_GNDA" color="5" fill="1" visible="no" active="no"/>
+<layer number="55" name="dxf2" color="14" fill="1" visible="no" active="no"/>
+<layer number="56" name="wert" color="13" fill="1" visible="no" active="no"/>
+<layer number="57" name="tCAD" color="7" fill="1" visible="no" active="no"/>
+<layer number="58" name="bRefDes" color="7" fill="1" visible="no" active="no"/>
+<layer number="59" name="tCarbon" color="11" fill="1" visible="no" active="no"/>
+<layer number="60" name="bCarbon" color="12" fill="1" visible="no" active="no"/>
+<layer number="61" name="pt_docu" color="12" fill="1" visible="no" active="no"/>
 <layer number="88" name="SimResults" color="9" fill="1" visible="yes" active="yes"/>
 <layer number="89" name="SimProbes" color="9" fill="1" visible="yes" active="yes"/>
 <layer number="90" name="Modules" color="5" fill="1" visible="yes" active="yes"/>
@@ -466,8 +466,8 @@ 0603, surface mount.
 <smd name="16_SDA2" x="-4.75" y="-2.2" dx="1.8" dy="0.8" layer="1"/>
 <smd name="17_SCL2" x="-4.75" y="-3.3" dx="1.8" dy="0.8" layer="1"/>
 <smd name="18_RESERVED" x="-4.75" y="-4.35" dx="1.8" dy="0.7" layer="1"/>
-<text x="3" y="-3.85" size="0.6096" layer="21" rot="R90">ublox</text>
-<text x="0.15" y="-1.35" size="0.6096" layer="21" rot="R90">MAX-6</text>
+<text x="-0.81" y="-1.31" size="0.6096" layer="51" rot="R90">ublox</text>
+<text x="0.15" y="-1.35" size="0.6096" layer="51" rot="R90">MAX-8</text>
 </package>
 </packages>
 <symbols>
@@ -1397,8 +1397,8 @@ 0603, surface mount.
 <pad name="1" x="-6.25" y="0" drill="0.9"/>
 <pad name="2" x="6.25" y="0" drill="0.9"/>
 <circle x="0" y="0" radius="6.25" width="0.127" layer="51"/>
-<text x="-7.62" y="-2.54" size="1.5" layer="21">+</text>
-<text x="6.35" y="-2.54" size="1.5" layer="21">-</text>
+<text x="-7.874" y="-1.524" size="1.27" layer="21">+</text>
+<text x="7.874" y="-1.524" size="1.27" layer="21" rot="R90">-</text>
 </package>
 <package name="0402-CAP">
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>