Changeset - b25034349000
Parent rev.
Child rev.
[Not reviewed]
default
0 2 0
Ethan Zonca (ethanzonca) - 9 years ago 2016-11-07 17:04:44
e@ethanzonca.com
Final routing and schematic for sonde
1 file changed:
sonde.brd
394
361
Changeset was too big and was cut off... Show full diff anyway
0 comments (0 inline, 0 general)
sonde.brd
➞
Show inline comments
 
@@ -6,7 +6,7 @@
 
<setting alwaysvectorfont="yes"/>
 
<setting verticaltext="up"/>
 
</settings>
 
<grid distance="10" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="5" altunitdist="mil" altunit="mil"/>
 
<grid distance="10" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="2.5" altunitdist="mil" altunit="mil"/>
 
<layers>
 
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 
<layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
 
@@ -23,16 +23,16 @@
 
<layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
 
<layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
 
<layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
 
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 
<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="yes"/>
 
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 
<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="yes"/>
 
<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 
<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
 
<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="yes"/>
 
<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
 
<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
 
<layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
 
<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
 
<layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
 
<layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
 
<layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
 
@@ -192,38 +192,38 @@
 
</layers>
 
<board>
 
<plain>
 
<wire x1="13.573125" y1="21.43125" x2="9.509125" y2="21.43125" width="0" layer="20"/>
 
<wire x1="9.509125" y1="21.43125" x2="8.874125" y2="20.79625" width="0" layer="20" curve="90"/>
 
<wire x1="8.874125" y1="20.79625" x2="8.874125" y2="14.2875" width="0" layer="20"/>
 
<wire x1="8.874125" y1="14.2875" x2="0.47625" y2="14.2875" width="0" layer="20"/>
 
<wire x1="0.47625" y1="14.2875" x2="-0.15875" y2="13.6525" width="0" layer="20" curve="90"/>
 
<wire x1="-0.15875" y1="13.6525" x2="-0.15875" y2="12.065" width="0" layer="20"/>
 
<wire x1="-0.15875" y1="12.065" x2="0.47625" y2="11.43" width="0" layer="20" curve="90"/>
 
<wire x1="0.47625" y1="11.43" x2="8.874125" y2="11.43" width="0" layer="20"/>
 
<wire x1="8.874125" y1="11.43" x2="8.874125" y2="2.079625" width="0" layer="20"/>
 
<wire x1="8.874125" y1="2.079625" x2="9.5885" y2="1.444625" width="0" layer="20" curve="90"/>
 
<wire x1="9.5885" y1="1.444625" x2="20.712059375" y2="1.444625" width="0" layer="20"/>
 
<wire x1="13.573125" y1="21.55825" x2="9.001125" y2="21.55825" width="0" layer="20"/>
 
<wire x1="9.001125" y1="21.55825" x2="8.366125" y2="20.92325" width="0" layer="20" curve="90"/>
 
<wire x1="8.366125" y1="20.92325" x2="8.366125" y2="14.2875" width="0" layer="20"/>
 
<wire x1="8.366125" y1="14.2875" x2="-0.28575" y2="14.2875" width="0" layer="20"/>
 
<wire x1="-0.28575" y1="14.2875" x2="-0.92075" y2="13.6525" width="0" layer="20" curve="90"/>
 
<wire x1="-0.92075" y1="13.6525" x2="-0.92075" y2="12.065" width="0" layer="20"/>
 
<wire x1="-0.92075" y1="12.065" x2="-0.28575" y2="11.43" width="0" layer="20" curve="90"/>
 
<wire x1="-0.28575" y1="11.43" x2="8.366125" y2="11.43" width="0" layer="20"/>
 
<wire x1="8.366125" y1="11.43" x2="8.366125" y2="2.079625" width="0" layer="20"/>
 
<wire x1="8.366125" y1="2.079625" x2="9.144" y2="1.444625" width="0" layer="20" curve="90"/>
 
<wire x1="9.144" y1="1.444625" x2="20.712059375" y2="1.444625" width="0" layer="20"/>
 
<wire x1="20.712059375" y1="1.444625" x2="21.351875" y2="2.076846875" width="0" layer="20" curve="89.749333"/>
 
<wire x1="21.351875" y1="2.076846875" x2="21.351875" y2="20.79625" width="0" layer="20"/>
 
<wire x1="21.351875" y1="20.79625" x2="20.716875" y2="21.43125" width="0" layer="20" curve="90"/>
 
<wire x1="20.716875" y1="21.43125" x2="16.8275" y2="21.43125" width="0" layer="20"/>
 
<wire x1="16.8275" y1="21.43125" x2="16.8275" y2="22.5407" width="0" layer="20"/>
 
<wire x1="21.351875" y1="2.076846875" x2="21.351875" y2="20.92325" width="0" layer="20"/>
 
<wire x1="21.351875" y1="20.92325" x2="20.716875" y2="21.55825" width="0" layer="20" curve="90"/>
 
<wire x1="20.716875" y1="21.55825" x2="16.8275" y2="21.55825" width="0" layer="20"/>
 
<wire x1="16.8275" y1="21.55825" x2="16.8275" y2="22.5407" width="0" layer="20"/>
 
<wire x1="16.8275" y1="22.5407" x2="15.317575" y2="23.97125" width="0" layer="20" curve="90"/>
 
<wire x1="15.317575" y1="23.97125" x2="14.97135625" y2="23.97125" width="0" layer="20"/>
 
<wire x1="14.97135625" y1="23.97125" x2="13.573125" y2="22.33489375" width="0" layer="20" curve="90"/>
 
<wire x1="13.573125" y1="22.33489375" x2="13.573125" y2="21.43125" width="0" layer="20"/>
 
<wire x1="13.573125" y1="22.33489375" x2="13.573125" y2="21.55825" width="0" layer="20"/>
 
<dimension x1="21.59" y1="0" x2="21.9075" y2="21.2725" x3="-2.8575" y3="10.63625" textsize="1.778" layer="108" dtype="vertical" unit="inch"/>
 
<dimension x1="9.2075" y1="21.9075" x2="21.2725" y2="21.9075" x3="15.24" y3="-6.6675" textsize="1.778" layer="108" dtype="horizontal" unit="inch"/>
 
<hole x="15.1765" y="22.386925" drill="1.5875"/>
 
<text x="15.160625" y="8.89" size="0.8128" layer="22" font="vector" ratio="16" rot="MR90">vin</text>
 
<text x="19.939" y="2.079625" size="0.8128" layer="22" ratio="16" rot="MR0">protofusion.org</text>
 
<text x="13.160375" y="5.5245" size="0.8128" layer="22" font="vector" ratio="16" rot="MR270">+</text>
 
<circle x="17.922875" y="7.3025" radius="0.079375" width="0.4064" layer="22"/>
 
<circle x="12.842875" y="8.493125" radius="0.079375" width="0.4064" layer="21"/>
 
<circle x="17.541875" y="14.9225" radius="0.079375" width="0.4064" layer="21"/>
 
<circle x="8.556625" y="15.986125" radius="0.079375" width="0.4064" layer="21"/>
 
<text x="9.525" y="9.604375" size="0.762" layer="29" font="vector" ratio="16" rot="SR270">feather2</text>
 
<dimension x1="26.924" y1="1.016" x2="25.908" y2="16.256" x3="48.26" y3="8.636" textsize="0.8128" textratio="16" layer="21" dtype="vertical"/>
 
<dimension x1="43.434" y1="28.702" x2="31.242" y2="29.21" x3="37.338" y3="-2.794" textsize="0.8128" textratio="16" layer="21" dtype="horizontal"/>
 
<circle x="9.001125" y="17.573625" radius="0.079375" width="0.4064" layer="21"/>
 
<text x="8.9535" y="6.619875" size="0.762" layer="29" font="vector" ratio="16" rot="SR270">sonde01</text>
 
<circle x="20.494625" y="5.572125" radius="0.079375" width="0.4064" layer="21"/>
 
<text x="8.9535" y="14.4145" size="0.8128" layer="29" font="vector" ratio="16" rot="SR270">protofusion</text>
 
<text x="13.160375" y="7.1755" size="0.8128" layer="22" font="vector" ratio="16" rot="MR270">-</text>
 
</plain>
 
<libraries>
 
<library name="Ava">
 
@@ -914,6 +914,21 @@ Source: http://www.osram.convergy.de/ ..
 
<wire x1="-0.0762" y1="0.3302" x2="0.0762" y2="0.3302" width="0.127" layer="21"/>
 
<wire x1="-0.0762" y1="-0.3302" x2="0.0762" y2="-0.3302" width="0.127" layer="21"/>
 
</package>
 
<package name="0603-RES">
 
<wire x1="-1.2446" y1="0.635" x2="1.2446" y2="0.635" width="0.0508" layer="39"/>
 
<wire x1="1.2446" y1="0.635" x2="1.2446" y2="-0.635" width="0.0508" layer="39"/>
 
<wire x1="1.2446" y1="-0.635" x2="-1.2446" y2="-0.635" width="0.0508" layer="39"/>
 
<wire x1="-1.2446" y1="-0.635" x2="-1.2446" y2="0.635" width="0.0508" layer="39"/>
 
<smd name="1" x="-0.75" y="0" dx="0.5" dy="0.9" layer="1"/>
 
<smd name="2" x="0.75" y="0" dx="0.5" dy="0.9" layer="1"/>
 
<text x="-1.016" y="0.762" size="0.8128" layer="25" font="vector" ratio="16">&gt;NAME</text>
 
<text x="-1.016" y="-1.524" size="0.8128" layer="27" font="vector" ratio="16">&gt;VALUE</text>
 
<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="21"/>
 
<rectangle x1="-0.8" y1="-0.425" x2="0.8" y2="0.425" layer="51"/>
 
<wire x1="-0.254" y1="0.508" x2="0.254" y2="0.508" width="0.127" layer="21"/>
 
<wire x1="-0.254" y1="-0.508" x2="0.254" y2="-0.508" width="0.127" layer="21"/>
 
</package>
 
<package name="0402-RES">
 
<wire x1="-0.8128" y1="0.4318" x2="0.8128" y2="0.4318" width="0.0508" layer="39"/>
 
<wire x1="0.8128" y1="0.4318" x2="0.8128" y2="-0.4318" width="0.0508" layer="39"/>
 
@@ -998,9 +1013,9 @@ Source: http://www.osram.convergy.de/ ..
 
<text x="-1.4" y="1.3" size="0.6096" layer="25">&gt;NAME</text>
 
<text x="-1.4" y="-2" size="0.6096" layer="27">&gt;VALUE</text>
 
<rectangle x1="0.475" y1="0.35" x2="1.125" y2="1" layer="51"/>
 
<rectangle x1="-1.125" y1="0.35" x2="-0.475" y2="1" layer="52" rot="R180"/>
 
<rectangle x1="0.475" y1="-1" x2="1.125" y2="-0.35" layer="52"/>
 
<polygon width="0" layer="21">
 
<rectangle x1="-1.125" y1="0.35" x2="-0.475" y2="1" layer="51" rot="R180"/>
 
<rectangle x1="0.475" y1="-1" x2="1.125" y2="-0.35" layer="51"/>
 
<polygon width="0.0254" layer="51">
 
<vertex x="-1.125" y="-1"/>
 
<vertex x="-0.475" y="-1"/>
 
<vertex x="-0.475" y="-0.65"/>
 
@@ -1010,54 +1025,6 @@ Source: http://www.osram.convergy.de/ ..
 
</package>
 
</packages>
 
</library>
 
<library name="SparkFun-Aesthetics">
 
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
 
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;
 
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
 
&lt;br&gt;&lt;br&gt;
 
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
 
&lt;br&gt;&lt;br&gt;
 
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
 
<packages>
 
<package name="OSHW-LOGO-L">
 
<polygon width="0.15" layer="21">
 
<vertex x="0.9209" y="-2.2231" curve="9.497479"/>
 
<vertex x="1.2751" y="-2.0407"/>
 
<vertex x="2.1548" y="-2.758"/>
 
<vertex x="2.758" y="-2.1548"/>
 
<vertex x="2.0407" y="-1.2751" curve="18.998791"/>
 
<vertex x="2.3446" y="-0.5413"/>
 
<vertex x="3.4739" y="-0.4265"/>
 
<vertex x="3.4739" y="0.4265"/>
 
<vertex x="2.3446" y="0.5413" curve="18.998791"/>
 
<vertex x="2.0407" y="1.2751"/>
 
<vertex x="2.758" y="2.1548"/>
 
<vertex x="2.1548" y="2.758"/>
 
<vertex x="1.2751" y="2.0407" curve="18.998791"/>
 
<vertex x="0.5413" y="2.3446"/>
 
<vertex x="0.4265" y="3.4739"/>
 
<vertex x="-0.4265" y="3.4739"/>
 
<vertex x="-0.5413" y="2.3446" curve="18.998791"/>
 
<vertex x="-1.2751" y="2.0407"/>
 
<vertex x="-2.1548" y="2.758"/>
 
<vertex x="-2.758" y="2.1548"/>
 
<vertex x="-2.0407" y="1.2751" curve="18.998791"/>
 
<vertex x="-2.3446" y="0.5413"/>
 
<vertex x="-3.4739" y="0.4265"/>
 
<vertex x="-3.4739" y="-0.4265"/>
 
<vertex x="-2.3446" y="-0.5413" curve="18.998791"/>
 
<vertex x="-2.0407" y="-1.2751"/>
 
<vertex x="-2.758" y="-2.1548"/>
 
<vertex x="-2.1548" y="-2.758"/>
 
<vertex x="-1.2751" y="-2.0407" curve="9.497479"/>
 
<vertex x="-0.9209" y="-2.2231"/>
 
<vertex x="-0.4186" y="-1.0105" curve="-67.504205"/>
 
<vertex x="-1.0938" y="0" curve="-247.497204"/>
 
<vertex x="0.4186" y="-1.0105"/>
 
</polygon>
 
</package>
 
</packages>
 
</library>
 
</libraries>
 
<attributes>
 
</attributes>
 
@@ -1244,7 +1211,7 @@ Please make sure your boards conform to
 
</autorouter>
 
<elements>
 
<element name="U1" library="Ava" package="QFN20+GNDPAD" value="SI4464" x="15.19" y="11.0055" smashed="yes" rot="R90"/>
 
<element name="U$4" library="picoAVA-R9" package="AVA_JTI_ANTENNA-1575AT43A40" value="AVA_JTI_ANTENNA-1575AT43A40" x="4.7625" y="12.855575" smashed="yes" rot="MR0"/>
 
<element name="U$4" library="picoAVA-R9" package="AVA_JTI_ANTENNA-1575AT43A40" value="AVA_JTI_ANTENNA-1575AT43A40" x="4.0005" y="12.855575" smashed="yes" rot="MR0"/>
 
<element name="U7" library="picoAVA-R9" package="AVA_UBLOX_MAX-6" value="AVA_UBLOX_MAX-6" x="15.0749" y="16.129" smashed="yes" rot="MR180"/>
 
<element name="U6" library="Protofusion" package="UFQFPN28" value="STM32F031G6U6" x="14.843125" y="17.618075" smashed="yes" rot="R180"/>
 
<element name="J1" library="Protofusion" package="POGOPROG-CONN-4-ALLSMT" value="POGOPIN-CONN-4" x="20.32" y="7.747" smashed="yes" rot="MR180">
 
@@ -1254,114 +1221,114 @@ Please make sure your boards conform to
 
<attribute name="NAME" x="15.9385" y="7.032625" size="0.8128" layer="26" ratio="16" rot="MR270"/>
 
<attribute name="VALUE" x="18.081625" y="2.2225" size="1.27" layer="28" rot="MR0"/>
 
</element>
 
<element name="L1" library="SparkFun-Passives" package="1210" value="LQH32CN100K33L" x="15.541625" y="9.445625" smashed="yes" rot="MR0">
 
<attribute name="NAME" x="16.214625" y="9.056625" size="0.8128" layer="26" ratio="16" rot="MR0"/>
 
<attribute name="VALUE" x="16.441625" y="8.745625" size="0.4064" layer="28" rot="MR0"/>
 
<element name="L1" library="SparkFun-Passives" package="1210" value="LQH32CN100K33L" x="15.478125" y="9.445625" smashed="yes" rot="MR0">
 
<attribute name="NAME" x="16.151125" y="9.056625" size="0.8128" layer="26" ratio="16" rot="MR0"/>
 
<attribute name="VALUE" x="16.378125" y="8.745625" size="0.4064" layer="28" rot="MR0"/>
 
</element>
 
<element name="U$3" library="Protofusion" package="FEATHERHAB-ALPHA" value="" x="0.3175" y="12.22375" smashed="yes"/>
 
<element name="D1" library="adafruit" package="CHIPLED_0603" value="" x="10.461625" y="20.558125" smashed="yes" rot="R90">
 
<attribute name="NAME" x="11.350625" y="20.939125" size="0.8128" layer="25" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="11.731625" y="22.463125" size="1.27" layer="27" rot="R180"/>
 
<element name="U$3" library="Protofusion" package="FEATHERHAB-ALPHA" value="" x="-0.508" y="12.22375" smashed="yes"/>
 
<element name="D1" library="adafruit" package="CHIPLED_0603" value="" x="9.667875" y="19.859625" smashed="yes" rot="R180">
 
<attribute name="NAME" x="9.191625" y="20.240625" size="0.8128" layer="25" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="7.762875" y="21.129625" size="1.27" layer="27" rot="R270"/>
 
</element>
 
<element name="GND-1" library="Protofusion" package="WIREPAD" value="WIREPAD" x="19.764375" y="2.63525" smashed="yes" rot="MR90">
 
<attribute name="VALUE" x="19.764375" y="2.63525" size="0.0254" layer="28" rot="MR90"/>
 
</element>
 
<element name="ANT" library="Protofusion" package="WIREPAD" value="WIREPAD" x="15.287625" y="2.667" smashed="yes" rot="R90">
 
<attribute name="VALUE" x="15.287625" y="2.667" size="0.0254" layer="27" rot="R90"/>
 
<element name="ANT" library="Protofusion" package="WIREPAD" value="WIREPAD" x="15.287625" y="2.4765" smashed="yes" rot="R90">
 
<attribute name="VALUE" x="15.287625" y="2.4765" size="0.0254" layer="27" rot="R90"/>
 
</element>
 
<element name="GND-2" library="Protofusion" package="WIREPAD" value="WIREPAD" x="10.874375" y="2.44475" smashed="yes" rot="MR90">
 
<attribute name="VALUE" x="10.874375" y="2.44475" size="0.0254" layer="28" rot="MR90"/>
 
<element name="GND-2" library="Protofusion" package="WIREPAD" value="WIREPAD" x="9.858375" y="2.57175" smashed="yes" rot="MR90">
 
<attribute name="VALUE" x="9.858375" y="2.57175" size="0.0254" layer="28" rot="MR90"/>
 
</element>
 
<element name="J3" library="SLAT-Connectors" package="JST_ZH-V-2-1" value="JST_ZH-V-2-1" x="11.303" y="4.699" smashed="yes" rot="MR90">
 
<attribute name="VALUE" x="7.3914" y="2.9936" size="1.27" layer="28" rot="MR90"/>
 
<element name="J3" library="SLAT-Connectors" package="JST_ZH-V-2-1" value="JST_ZH-V-2-1" x="10.7315" y="5.207" smashed="yes" rot="MR90">
 
<attribute name="VALUE" x="6.8199" y="3.5016" size="1.27" layer="28" rot="MR90"/>
 
</element>
 
<element name="U5" library="SLAT-Digital" package="HCLGA-10L" value="LPS25H" x="18.542" y="5.334" smashed="yes" rot="R90">
 
<attribute name="NAME" x="18.947" y="4.727" size="0.8128" layer="25" font="vector" ratio="16" rot="R90"/>
 
<attribute name="VALUE" x="20.792" y="3.084" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
<element name="U5" library="SLAT-Digital" package="HCLGA-10L" value="LPS25H" x="17.526" y="5.334" smashed="yes" rot="R90">
 
<attribute name="NAME" x="18.387" y="5.739" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="19.776" y="3.084" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
</element>
 
<element name="CM1" library="Protofusion-passives" package="0402-CAP" value="12pF" x="14.605" y="5.715" smashed="yes">
 
<attribute name="NAME" x="13.716" y="5.334" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.589" y="4.445" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="CM1" library="Protofusion-passives" package="0402-CAP" value="12pF" x="14.478" y="5.588" smashed="yes">
 
<attribute name="NAME" x="13.843" y="5.7785" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.462" y="4.318" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="CM" library="Protofusion-passives" package="0402-CAP" value="15pF" x="14.605" y="7.239" smashed="yes">
 
<attribute name="NAME" x="13.97" y="6.858" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.589" y="5.969" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="CM" library="Protofusion-passives" package="0402-CAP" value="15pF" x="14.478" y="7.112" smashed="yes">
 
<attribute name="NAME" x="15.1765" y="6.604" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.462" y="5.842" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="CM2" library="Protofusion-passives" package="0402-CAP" value="10pF" x="14.605" y="4.318" smashed="yes">
 
<attribute name="NAME" x="13.97" y="3.81" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.589" y="3.048" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="CM2" library="Protofusion-passives" package="0402-CAP" value="10pF" x="14.478" y="4.0005" smashed="yes">
 
<attribute name="NAME" x="14.1605" y="2.54" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.462" y="2.7305" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="C0" library="Protofusion-passives" package="0402-CAP" value="9.1pF" x="14.605" y="8.128" smashed="yes">
 
<attribute name="NAME" x="13.97" y="7.747" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.589" y="6.858" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="C0" library="Protofusion-passives" package="0402-CAP" value="9.1pF" x="14.478" y="8.001" smashed="yes">
 
<attribute name="NAME" x="14.224" y="8.509" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.462" y="6.731" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="LM3" library="Protofusion-passives" package="0402-INDUCTOR" value="22nH" x="13.462" y="3.175" smashed="yes" rot="R90">
 
<attribute name="NAME" x="13.843" y="2.032" size="0.8128" layer="25" font="vector" ratio="16" rot="R90"/>
 
<attribute name="VALUE" x="14.732" y="2.159" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
<element name="LM3" library="Protofusion-passives" package="0402-INDUCTOR" value="22nH" x="13.208" y="2.8575" smashed="yes" rot="R90">
 
<attribute name="NAME" x="12.827" y="3.175" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="14.478" y="1.8415" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
</element>
 
<element name="LM2" library="Protofusion-passives" package="0402-INDUCTOR" value="36nH" x="13.462" y="4.699" smashed="yes" rot="R90">
 
<attribute name="NAME" x="13.843" y="3.937" size="0.8128" layer="25" font="vector" ratio="16" rot="R90"/>
 
<attribute name="VALUE" x="14.732" y="3.683" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
<element name="LM2" library="Protofusion-passives" package="0402-INDUCTOR" value="36nH" x="13.208" y="4.445" smashed="yes" rot="R90">
 
<attribute name="NAME" x="12.7" y="4.826" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="14.478" y="3.429" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
</element>
 
<element name="LM1" library="Protofusion-passives" package="0402-INDUCTOR" value="30nH" x="13.462" y="6.223" smashed="yes" rot="R90">
 
<attribute name="NAME" x="13.843" y="5.334" size="0.8128" layer="25" font="vector" ratio="16" rot="R90"/>
 
<attribute name="VALUE" x="14.732" y="5.207" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
<element name="LM1" library="Protofusion-passives" package="0402-INDUCTOR" value="30nH" x="13.208" y="6.0325" smashed="yes" rot="R90">
 
<attribute name="NAME" x="12.6365" y="6.2865" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="14.478" y="5.0165" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
</element>
 
<element name="L0" library="Protofusion-passives" package="0402-INDUCTOR" value="33nH" x="13.462" y="7.747" smashed="yes" rot="R90">
 
<attribute name="NAME" x="13.843" y="7.239" size="0.8128" layer="25" font="vector" ratio="16" rot="R90"/>
 
<attribute name="VALUE" x="14.732" y="6.731" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
<element name="L0" library="Protofusion-passives" package="0402-INDUCTOR" value="33nH" x="13.208" y="7.62" smashed="yes" rot="R90">
 
<attribute name="NAME" x="12.5095" y="7.874" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="14.478" y="6.604" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
</element>
 
<element name="LCHOKE" library="Protofusion-passives" package="0402-INDUCTOR" value="220nH" x="16.129" y="8.128" smashed="yes">
 
<attribute name="NAME" x="15.494" y="7.747" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="15.113" y="6.858" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="LCHOKE" library="Protofusion-passives" package="0402-INDUCTOR" value="220nH" x="16.129" y="8.001" smashed="yes">
 
<attribute name="NAME" x="16.8275" y="7.3025" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="15.113" y="6.731" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="C4" library="Protofusion-passives" package="0402-CAP" value="15pF" x="11.43" y="14.224" smashed="yes" rot="R90">
 
<attribute name="NAME" x="11.811" y="13.462" size="0.8128" layer="25" font="vector" ratio="16" rot="R90"/>
 
<attribute name="VALUE" x="12.7" y="13.208" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
<element name="C4" library="Protofusion-passives" package="0402-CAP" value="15pF" x="11.2395" y="13.3985" smashed="yes" rot="R90">
 
<attribute name="NAME" x="10.7315" y="13.716" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="12.5095" y="12.3825" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
</element>
 
<element name="C1" library="Protofusion-passives" package="0402-CAP" value="100pF" x="18.669" y="9.398" smashed="yes">
 
<attribute name="NAME" x="18.034" y="8.89" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="17.653" y="8.128" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="C1" library="Protofusion-passives" package="0402-CAP" value="100pF" x="18.669" y="9.144" smashed="yes">
 
<attribute name="NAME" x="19.7485" y="8.1915" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="17.653" y="7.874" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="C2" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="18.669" y="10.16" smashed="yes">
 
<attribute name="NAME" x="18.034" y="9.779" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="17.653" y="8.89" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="C2" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="18.669" y="10.033" smashed="yes">
 
<attribute name="NAME" x="19.685" y="9.271" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="17.653" y="8.763" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="C3" library="Protofusion-passives" package="0402-CAP" value="1uF" x="18.669" y="10.922" smashed="yes">
 
<attribute name="NAME" x="17.907" y="10.541" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="NAME" x="19.558" y="10.414" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="17.653" y="9.652" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="R2" library="Protofusion-passives" package="0402-RES" value="100k" x="18.415" y="12.954" smashed="yes">
 
<attribute name="NAME" x="17.78" y="12.573" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="NAME" x="19.2405" y="12.7635" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="17.399" y="11.684" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="C11" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="20.447" y="4.572" smashed="yes" rot="R270">
 
<attribute name="NAME" x="20.066" y="5.334" size="0.8128" layer="25" font="vector" ratio="16" rot="R270"/>
 
<attribute name="VALUE" x="19.177" y="5.588" size="0.8128" layer="27" font="vector" ratio="16" rot="R270"/>
 
<element name="C11" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="19.685" y="4.572" smashed="yes" rot="R270">
 
<attribute name="NAME" x="20.32" y="4.191" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="18.415" y="5.588" size="0.8128" layer="27" font="vector" ratio="16" rot="R270"/>
 
</element>
 
<element name="C12" library="Protofusion-passives" package="0603-CAP" value="4.7uF" x="16.383" y="5.08" smashed="yes" rot="R270">
 
<attribute name="NAME" x="16.002" y="6.096" size="0.8128" layer="25" font="vector" ratio="16" rot="R270"/>
 
<attribute name="VALUE" x="14.859" y="6.096" size="0.8128" layer="27" font="vector" ratio="16" rot="R270"/>
 
<element name="C12" library="Protofusion-passives" package="0603-CAP" value="4.7uF" x="18.8595" y="2.921" smashed="yes">
 
<attribute name="NAME" x="20.0025" y="2.6035" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="17.8435" y="1.397" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="Q2" library="SLAT-Transistors" package="SC-75A" value="SSM3J36FS,LF" x="19.812" y="17.399" smashed="yes" rot="R180">
 
<attribute name="NAME" x="20.6374" y="17.7706" size="0.8128" layer="25" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="21.3994" y="20.4864" size="1.27" layer="27" rot="R180"/>
 
<element name="Q2" library="SLAT-Transistors" package="SC-75A" value="SSM3J36FS,LF" x="19.812" y="17.272" smashed="yes" rot="R180">
 
<attribute name="NAME" x="20.8916" y="16.9004" size="0.8128" layer="25" ratio="16"/>
 
<attribute name="VALUE" x="21.3994" y="20.3594" size="1.27" layer="27" rot="R180"/>
 
</element>
 
<element name="R8" library="Protofusion-passives" package="0402-RES" value="10k" x="19.812" y="18.923" smashed="yes">
 
<attribute name="NAME" x="19.177" y="18.542" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="18.796" y="17.653" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="R8" library="Protofusion-passives" package="0402-RES" value="10k" x="19.812" y="18.796" smashed="yes">
 
<attribute name="NAME" x="20.6375" y="18.288" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="18.796" y="17.526" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="R9" library="Protofusion-passives" package="0402-RES" value="100" x="19.812" y="19.685" smashed="yes" rot="R180">
 
<attribute name="NAME" x="20.447" y="20.066" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="20.828" y="20.955" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
 
<element name="R9" library="Protofusion-passives" package="0402-RES" value="100" x="19.812" y="19.7485" smashed="yes" rot="R180">
 
<attribute name="NAME" x="20.6375" y="19.4945" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="20.828" y="21.0185" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
 
</element>
 
<element name="R4" library="Protofusion-passives" package="0402-RES" value="100" x="11.43" y="19.685" smashed="yes" rot="R180">
 
<attribute name="NAME" x="12.065" y="20.066" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="12.446" y="20.955" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
 
<element name="R4" library="Protofusion-passives" package="0402-RES" value="100" x="11.1125" y="20.6375" smashed="yes" rot="R180">
 
<attribute name="NAME" x="11.8745" y="22.0345" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="12.1285" y="21.9075" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
 
</element>
 
<element name="C13" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="10.541" y="18.161" smashed="yes" rot="R180">
 
<attribute name="NAME" x="11.811" y="18.542" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="11.557" y="19.431" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
 
<element name="C13" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="10.4775" y="17.907" smashed="yes" rot="R180">
 
<attribute name="NAME" x="10.033" y="18.923" size="0.8128" layer="25" font="vector" ratio="16" rot="R180"/>
 
<attribute name="VALUE" x="11.4935" y="19.177" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
 
</element>
 
<element name="C5" library="Protofusion-passives" package="0805-CAP" value="47uF" x="17.78" y="4.191" smashed="yes" rot="MR0">
 
<attribute name="NAME" x="18.545" y="3.821" size="0.8128" layer="26" font="vector" ratio="16" rot="MR0"/>
 
@@ -1371,42 +1338,54 @@ Please make sure your boards conform to
 
<attribute name="NAME" x="13.84" y="4.053" size="0.8128" layer="26" font="vector" ratio="16" rot="MR180"/>
 
<attribute name="VALUE" x="13.332" y="5.51" size="0.8128" layer="28" font="vector" ratio="16" rot="MR180"/>
 
</element>
 
<element name="R5" library="Protofusion-passives" package="0402-RES" value="2M 1%" x="13.589" y="20.32" smashed="yes">
 
<attribute name="NAME" x="12.827" y="19.939" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="12.573" y="19.05" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="R5" library="Protofusion-passives" package="0402-RES" value="2M 1%" x="14.097" y="20.447" smashed="yes">
 
<attribute name="NAME" x="13.3985" y="21.082" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="13.081" y="19.177" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="R6" library="Protofusion-passives" package="0402-RES" value="2M 1%" x="16.637" y="20.32" smashed="yes">
 
<attribute name="NAME" x="15.875" y="19.939" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="15.621" y="19.05" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="R6" library="Protofusion-passives" package="0402-RES" value="2M 1%" x="17.399" y="20.7645" smashed="yes">
 
<attribute name="NAME" x="16.8275" y="21.2725" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="16.383" y="19.4945" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="C9" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="15.113" y="20.828" smashed="yes">
 
<attribute name="NAME" x="14.351" y="20.574" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="14.097" y="19.558" size="0.8128" layer="27" font="vector" ratio="16"/>
 
<element name="C9" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="15.748" y="20.447" smashed="yes">
 
<attribute name="NAME" x="15.113" y="21.082" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="14.732" y="19.177" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="C14" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="18.542" y="18.288" smashed="yes" rot="R270">
 
<attribute name="NAME" x="18.161" y="19.304" size="0.8128" layer="25" font="vector" ratio="16" rot="R270"/>
 
<attribute name="NAME" x="18.9865" y="19.05" size="0.8128" layer="25" font="vector" ratio="16" rot="R90"/>
 
<attribute name="VALUE" x="17.272" y="19.304" size="0.8128" layer="27" font="vector" ratio="16" rot="R270"/>
 
</element>
 
<element name="C7" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="19.431" y="15.494"/>
 
<element name="C8" library="Protofusion-passives" package="0402-CAP" value="0.01uF" x="10.541" y="18.923" rot="R180"/>
 
<element name="U3" library="SLAT-Analog" package="ASDM" value="ASDMB-26.000MHZ-LY-T " x="10.668" y="16.51" rot="R270"/>
 
<element name="R1" library="Protofusion-passives" package="0402-RES" value="100k" x="12.192" y="8.636" rot="R90"/>
 
<element name="LOGO1" library="SparkFun-Aesthetics" package="OSHW-LOGO-L" value="OSHW-LOGOL" x="-2.032" y="-19.05"/>
 
<element name="C7" library="Protofusion-passives" package="0402-CAP" value="0.1uF" x="19.431" y="15.494" smashed="yes">
 
<attribute name="NAME" x="20.447" y="14.986" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="18.415" y="14.224" size="0.8128" layer="27" font="vector" ratio="16"/>
 
</element>
 
<element name="C8" library="Protofusion-passives" package="0402-CAP" value="0.01uF" x="11.8745" y="18.288" smashed="yes" rot="R90">
 
<attribute name="NAME" x="11.4935" y="20.447" size="0.8128" layer="25" font="vector" ratio="16" rot="R270"/>
 
<attribute name="VALUE" x="13.1445" y="17.272" size="0.8128" layer="27" font="vector" ratio="16" rot="R90"/>
 
</element>
 
<element name="U3" library="SLAT-Analog" package="ASDM" value="ASDMB-26.000MHZ-LY-T " x="10.414" y="16.002" smashed="yes" rot="R270">
 
<attribute name="NAME" x="9.903" y="15.778" size="0.6096" layer="25"/>
 
<attribute name="VALUE" x="8.414" y="17.402" size="0.6096" layer="27" rot="R270"/>
 
</element>
 
<element name="R1" library="Protofusion-passives" package="0402-RES" value="100k" x="11.684" y="9.144"/>
 
<element name="R3" library="Protofusion-passives" package="0603-RES" value="0" x="19.939" y="11.938" smashed="yes" rot="R180">
 
<attribute name="NAME" x="21.082" y="11.4935" size="0.8128" layer="25" font="vector" ratio="16"/>
 
<attribute name="VALUE" x="20.955" y="13.462" size="0.8128" layer="27" font="vector" ratio="16" rot="R180"/>
 
</element>
 
</elements>
 
<signals>
 
<signal name="GND">
 
<polygon width="0.254" layer="1">
 
<vertex x="9.2075" y="25.776"/>
 
<polygon width="0.2032" layer="1" isolate="0.1524">
 
<vertex x="8.4455" y="25.776"/>
 
<vertex x="22.22" y="25.014"/>
 
<vertex x="22.22" y="-0.4445"/>
 
<vertex x="12.7" y="-0.635"/>
 
<vertex x="9.2075" y="-0.635"/>
 
<vertex x="8.4455" y="-0.635"/>
 
</polygon>
 
<polygon width="0.254" layer="16">
 
<vertex x="9.2075" y="24.6965"/>
 
<vertex x="8.4455" y="24.6965"/>
 
<vertex x="22.22" y="24.252"/>
 
<vertex x="22.22" y="-1.9685"/>
 
<vertex x="9.2075" y="-1.524"/>
 
<vertex x="8.4455" y="-1.524"/>
 
</polygon>
 
<contactref element="U1" pad="21"/>
 
<contactref element="U1" pad="18"/>
 
@@ -1445,17 +1424,30 @@ Please make sure your boards conform to
 
<contactref element="U3" pad="2"/>
 
<contactref element="C8" pad="2"/>
 
<contactref element="R1" pad="1"/>
 
<via x="12.0015" y="18.780125" extent="1-16" drill="0.3302"/>
 
<via x="18.4785" y="20.558125" extent="1-16" drill="0.3302"/>
 
<via x="10.4775" y="10.906125" extent="1-16" drill="0.3302"/>
 
<via x="18.3515" y="16.875125" extent="1-16" drill="0.3302"/>
 
<wire x1="17.942" y1="6.344" x2="19.142" y2="6.344" width="0" layer="19" extent="1-1"/>
 
<wire x1="16.83" y1="4.191" x2="16.383" y2="4.33" width="0" layer="19" extent="1-16"/>
 
<wire x1="10.091" y1="18.923" x2="12.0015" y2="18.780125" width="0" layer="19" extent="1-1"/>
 
<wire x1="15.563" y1="20.828" x2="15.563" y2="20.897" width="0.2032" layer="1"/>
 
<wire x1="15.563" y1="20.897" x2="15.621" y2="20.955" width="0.2032" layer="1"/>
 
<wire x1="15.621" y1="20.955" x2="17.907" y2="20.955" width="0.2032" layer="1"/>
 
<wire x1="17.907" y1="20.955" x2="18.4785" y2="20.558125" width="0" layer="19" extent="1-16"/>
 
<via x="14.0335" y="18.526125" extent="1-16" drill="0.3302"/>
 
<via x="18.6055" y="20.558125" extent="1-16" drill="0.3302"/>
 
<via x="10.541" y="10.842625" extent="1-16" drill="0.3302"/>
 
<wire x1="12.993125" y1="18.368075" x2="12.307925" y2="18.368075" width="0.2032" layer="1"/>
 
<via x="17.018" y="2.286" extent="1-16" drill="0.508" alwaysstop="yes"/>
 
<via x="19.224625" y="6.429375" extent="1-16" drill="0.3302"/>
 
<via x="15.668625" y="7.127875" extent="1-16" drill="0.3302"/>
 
<via x="15.668625" y="5.730875" extent="1-16" drill="0.3302"/>
 
<via x="15.668625" y="5.032375" extent="1-16" drill="0.3302"/>
 
<via x="15.668625" y="6.429375" extent="1-16" drill="0.3302"/>
 
<via x="20.558125" y="4.143375" extent="1-16" drill="0.3302"/>
 
<via x="11.938" y="19.478625" extent="1-16" drill="0.3302"/>
 
<wire x1="16.198" y1="20.447" x2="16.198" y2="20.378" width="0.2032" layer="1"/>
 
<wire x1="16.198" y1="20.378" x2="16.4465" y2="20.1295" width="0.2032" layer="1"/>
 
<wire x1="16.4465" y1="20.1295" x2="17.0815" y2="20.1295" width="0.2032" layer="1"/>
 
<wire x1="17.0815" y1="20.1295" x2="17.0815" y2="20.0025" width="0.2032" layer="1"/>
 
<wire x1="17.0815" y1="20.0025" x2="17.272" y2="19.812" width="0.2032" layer="1"/>
 
<wire x1="17.272" y1="19.812" x2="17.526" y2="19.812" width="0.2032" layer="1"/>
 
<wire x1="12.307925" y1="18.368075" x2="11.938" y2="18.738" width="0.2032" layer="1"/>
 
<wire x1="11.938" y1="18.738" x2="11.938" y2="18.796" width="0.2032" layer="1"/>
 
<via x="12.176125" y="8.016875" extent="1-16" drill="0.3302"/>
 
<via x="12.366625" y="4.079875" extent="1-16" drill="0.3302"/>
 
<via x="12.366625" y="2.174875" extent="1-16" drill="0.3302"/>
 
<via x="12.176125" y="5.857875" extent="1-16" drill="0.3302"/>
 
</signal>
 
<signal name="VCC">
 
<contactref element="U1" pad="8"/>
 
@@ -1470,8 +1462,6 @@ Please make sure your boards conform to
 
<wire x1="19.3675" y1="15.319375" x2="18.970625" y2="15.319375" width="0.2032" layer="16"/>
 
<wire x1="18.970625" y1="15.319375" x2="18.811875" y2="15.478125" width="0.2032" layer="16"/>
 
<contactref element="U4" pad="3"/>
 
<wire x1="12.993125" y1="17.868075" x2="12.23245" y2="17.868075" width="0.254" layer="1"/>
 
<wire x1="12.23245" y1="17.868075" x2="11.90625" y2="17.541875" width="0.254" layer="1"/>
 
<wire x1="17.16" y1="10.0055" x2="17.7525" y2="10.0055" width="0.254" layer="1"/>
 
<contactref element="LCHOKE" pad="2"/>
 
<contactref element="C1" pad="1"/>
 
@@ -1486,29 +1476,23 @@ Please make sure your boards conform to
 
<contactref element="C8" pad="1"/>
 
<contactref element="U3" pad="4"/>
 
<wire x1="17.184425" y1="17.859375" x2="17.193125" y2="17.868075" width="0.254" layer="1"/>
 
<wire x1="19.304" y1="17.966" x2="19.312" y2="17.974" width="0.2032" layer="1"/>
 
<wire x1="19.312" y1="17.974" x2="19.312" y2="18.873" width="0.2032" layer="1"/>
 
<wire x1="19.312" y1="18.873" x2="19.362" y2="18.923" width="0.2032" layer="1"/>
 
<wire x1="11.443" y1="17.335" x2="11.699375" y2="17.335" width="0.2032" layer="1"/>
 
<wire x1="11.699375" y1="17.335" x2="11.90625" y2="17.541875" width="0.2032" layer="1"/>
 
<wire x1="17.16" y1="11.0055" x2="18.1755" y2="11.0055" width="0.2032" layer="1"/>
 
<wire x1="17.7525" y1="10.0055" x2="18.1915" y2="10.0055" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="9.398" x2="18.219" y2="10.16" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="10.16" x2="18.219" y2="10.922" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="9.398" x2="18.219" y2="8.567" width="0.2032" layer="1"/>
 
<wire x1="16.579" y1="8.128" x2="17.78" y2="8.128" width="0.2032" layer="1"/>
 
<via x="18.219" y="8.567" extent="1-16" drill="0.3302"/>
 
<wire x1="18.219" y1="9.144" x2="18.219" y2="10.033" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="10.033" x2="18.219" y2="10.922" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="9.144" x2="18.219" y2="8.313" width="0.2032" layer="1"/>
 
<wire x1="16.579" y1="8.001" x2="17.907" y2="8.001" width="0.2032" layer="1"/>
 
<via x="18.219" y="8.313" extent="1-16" drill="0.3302"/>
 
<wire x1="20.32" y1="5.842" x2="20.32" y2="6.477" width="0.254" layer="16"/>
 
<wire x1="18.219" y1="8.567" x2="18.219" y2="5.464" width="0.254" layer="16"/>
 
<wire x1="17.78" y1="8.128" x2="18.219" y2="8.567" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="10.922" x2="18.219" y2="11.742" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="11.742" x2="18.865" y2="12.388" width="0.2032" layer="1"/>
 
<wire x1="18.865" y1="12.954" x2="18.865" y2="12.388" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="8.313" x2="18.219" y2="5.464" width="0.254" layer="16"/>
 
<wire x1="17.907" y1="8.001" x2="18.219" y2="8.313" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="10.922" x2="18.219" y2="12.1865" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="12.1865" x2="18.865" y2="12.8325" width="0.2032" layer="1"/>
 
<wire x1="18.865" y1="12.954" x2="18.865" y2="12.8325" width="0.2032" layer="1"/>
 
<wire x1="18.865" y1="12.954" x2="18.865" y2="13.647" width="0.2032" layer="1"/>
 
<wire x1="18.865" y1="13.647" x2="18.669" y2="13.843" width="0.2032" layer="1"/>
 
<wire x1="18.669" y1="13.843" x2="18.161" y2="13.843" width="0.2032" layer="1"/>
 
<via x="18.161" y="13.843" extent="1-16" drill="0.3302"/>
 
<wire x1="18.161" y1="13.843" x2="18.161" y2="14.732" width="0.2032" layer="16"/>
 
<wire x1="16.811625" y1="5.4025" x2="18.73" y2="5.4025" width="0.254" layer="16"/>
 
<wire x1="18.73" y1="5.4025" x2="19.8805" y2="5.4025" width="0.254" layer="16"/>
 
<wire x1="19.8805" y1="5.4025" x2="20.32" y2="5.842" width="0.254" layer="16"/>
 
@@ -1518,30 +1502,40 @@ Please make sure your boards conform to
 
<wire x1="15.748" y1="17.653" x2="15.367" y2="17.653" width="0.2032" layer="1"/>
 
<wire x1="15.367" y1="17.653" x2="15.151925" y2="17.868075" width="0.2032" layer="1"/>
 
<wire x1="12.993125" y1="17.868075" x2="15.151925" y2="17.868075" width="0.2032" layer="1"/>
 
<wire x1="18.161" y1="14.732" x2="17.2085" y2="15.6845" width="0.2032" layer="16"/>
 
<wire x1="17.2085" y1="15.6845" x2="15.748" y2="17.145" width="0.2032" layer="16"/>
 
<wire x1="16.9545" y1="15.9385" x2="15.748" y2="17.145" width="0.2032" layer="16"/>
 
<wire x1="15.748" y1="17.145" x2="15.748" y2="17.653" width="0.2032" layer="16"/>
 
<via x="15.748" y="17.653" extent="1-16" drill="0.3302"/>
 
<wire x1="15.748" y1="17.653" x2="16.51" y2="17.653" width="0.2032" layer="1"/>
 
<wire x1="18.811875" y1="15.478125" x2="18.811875" y2="15.986125" width="0.2032" layer="16"/>
 
<wire x1="18.811875" y1="15.986125" x2="18.542" y2="16.256" width="0.2032" layer="16"/>
 
<wire x1="18.542" y1="16.256" x2="17.78" y2="16.256" width="0.2032" layer="16"/>
 
<wire x1="17.78" y1="16.256" x2="17.2085" y2="15.6845" width="0.2032" layer="16"/>
 
<wire x1="19.293" y1="18.992" x2="19.362" y2="18.923" width="0.2032" layer="1"/>
 
<wire x1="18.811875" y1="15.478125" x2="18.811875" y2="16.240125" width="0.2032" layer="16"/>
 
<wire x1="18.811875" y1="16.240125" x2="18.542" y2="16.51" width="0.2032" layer="16"/>
 
<wire x1="18.542" y1="16.51" x2="17.526" y2="16.51" width="0.2032" layer="16"/>
 
<wire x1="17.526" y1="16.51" x2="16.9545" y2="15.9385" width="0.2032" layer="16"/>
 
<wire x1="17.193125" y1="17.868075" x2="17.741075" y2="17.868075" width="0.2032" layer="1"/>
 
<wire x1="17.741075" y1="17.868075" x2="17.907" y2="18.034" width="0.2032" layer="1"/>
 
<wire x1="17.907" y1="18.034" x2="17.907" y2="18.542" width="0.2032" layer="1"/>
 
<wire x1="17.907" y1="18.542" x2="18.103" y2="18.738" width="0.2032" layer="1"/>
 
<wire x1="18.542" y1="18.738" x2="18.103" y2="18.738" width="0.2032" layer="1"/>
 
<wire x1="18.542" y1="18.738" x2="19.362" y2="18.738" width="0.2032" layer="1"/>
 
<wire x1="19.362" y1="18.738" x2="19.362" y2="18.923" width="0.2032" layer="1"/>
 
<wire x1="18.1915" y1="10.0055" x2="18.1915" y2="10.1325" width="0.2032" layer="1"/>
 
<wire x1="18.1915" y1="10.1325" x2="18.219" y2="10.16" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="10.922" x2="18.219" y2="10.962" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="10.962" x2="18.1755" y2="11.0055" width="0.2032" layer="1"/>
 
<wire x1="10.991" y1="18.923" x2="10.991" y2="18.161" width="0" layer="19" extent="1-1"/>
 
<wire x1="11.443" y1="17.335" x2="10.991" y2="18.161" width="0" layer="19" extent="1-1"/>
 
<wire x1="18.73" y1="5.4025" x2="18.219" y2="5.464" width="0" layer="19" extent="16-16"/>
 
<wire x1="16.9545" y1="15.9385" x2="17.399" y2="15.494" width="0.2032" layer="16"/>
 
<wire x1="17.399" y1="15.494" x2="17.399" y2="15.3035" width="0.2032" layer="16"/>
 
<wire x1="17.399" y1="15.3035" x2="18.161" y2="14.5415" width="0.2032" layer="16"/>
 
<wire x1="18.161" y1="14.5415" x2="18.161" y2="13.843" width="0.2032" layer="16"/>
 
<wire x1="18.73" y1="5.4025" x2="18.219" y2="5.4025" width="0.2032" layer="16"/>
 
<wire x1="18.219" y1="5.4025" x2="18.219" y2="5.464" width="0.2032" layer="16"/>
 
<wire x1="10.9275" y1="17.907" x2="10.9275" y2="17.0885" width="0.2032" layer="1"/>
 
<wire x1="10.9275" y1="17.0885" x2="11.189" y2="16.827" width="0.2032" layer="1"/>
 
<wire x1="11.8745" y1="17.838" x2="10.9965" y2="17.838" width="0.2032" layer="1"/>
 
<wire x1="10.9965" y1="17.838" x2="10.9275" y2="17.907" width="0.2032" layer="1"/>
 
<wire x1="12.993125" y1="17.868075" x2="11.904575" y2="17.868075" width="0.2032" layer="1"/>
 
<wire x1="11.904575" y1="17.868075" x2="11.8745" y2="17.838" width="0.2032" layer="1"/>
 
<wire x1="18.542" y1="18.738" x2="19.304" y2="18.738" width="0.2032" layer="1"/>
 
<wire x1="19.304" y1="18.738" x2="19.362" y2="18.796" width="0.2032" layer="1"/>
 
<wire x1="19.362" y1="18.796" x2="19.362" y2="17.897" width="0.2032" layer="1"/>
 
<wire x1="18.219" y1="10.033" x2="18.219" y2="10.105" width="0.3048" layer="1"/>
 
<wire x1="18.219" y1="10.105" x2="18.1915" y2="10.1325" width="0.3048" layer="1"/>
 
<wire x1="19.362" y1="17.897" x2="19.312" y2="17.847" width="0.3048" layer="1"/>
 
</signal>
 
<signal name="RADIO-GPIO1">
 
<contactref element="U1" pad="10"/>
 
@@ -1553,101 +1547,103 @@ Please make sure your boards conform to
 
<wire x1="12.993125" y1="16.368075" x2="13.453425" y2="16.368075" width="0.2032" layer="1"/>
 
<wire x1="13.453425" y1="16.368075" x2="14.16685" y2="17.0815" width="0.2032" layer="1"/>
 
<wire x1="14.78915" y1="17.0815" x2="15.105934375" y2="17.0815" width="0.2032" layer="16"/>
 
<wire x1="15.105934375" y1="17.0815" x2="17.5133" y2="14.674134375" width="0.2032" layer="16"/>
 
<wire x1="17.5133" y1="14.674134375" x2="17.5133" y2="13.3858" width="0.2032" layer="16"/>
 
<wire x1="14.16685" y1="17.0815" x2="14.78915" y2="17.0815" width="0.2032" layer="1"/>
 
<wire x1="17.5133" y1="13.3858" x2="17.145" y2="13.0175" width="0.2032" layer="16"/>
 
<contactref element="R2" pad="1"/>
 
<wire x1="17.965" y1="12.954" x2="17.2085" y2="12.954" width="0.2032" layer="1"/>
 
<wire x1="17.2085" y1="12.954" x2="17.145" y2="13.0175" width="0.2032" layer="1"/>
 
<wire x1="15.105934375" y1="17.0815" x2="17.018" y2="15.169434375" width="0.2032" layer="16"/>
 
<wire x1="17.018" y1="15.169434375" x2="17.018" y2="14.986" width="0.2032" layer="16"/>
 
<wire x1="17.018" y1="14.986" x2="17.5133" y2="14.4907" width="0.2032" layer="16"/>
 
<wire x1="17.5133" y1="14.4907" x2="17.5133" y2="13.3858" width="0.2032" layer="16"/>
 
</signal>
 
<signal name="RADIO-SHDN">
 
<contactref element="U1" pad="1"/>
 
<contactref element="U6" pad="19"/>
 
<wire x1="12.993125" y1="16.868075" x2="12.677075" y2="16.868075" width="0.2032" layer="1"/>
 
<wire x1="14.19" y1="9.0355" x2="12.2425" y2="9.0355" width="0.2032" layer="1"/>
 
<via x="12.192" y="9.906" extent="1-16" drill="0.3302"/>
 
<wire x1="12.192" y1="9.906" x2="12.192" y2="12.954" width="0.2032" layer="16"/>
 
<via x="12.192" y="12.954" extent="1-16" drill="0.3302"/>
 
<via x="12.192" y="9.9695" extent="1-16" drill="0.3302"/>
 
<via x="12.3825" y="15.24" extent="1-16" drill="0.3302"/>
 
<contactref element="R1" pad="2"/>
 
<wire x1="12.192" y1="9.086" x2="12.192" y2="9.906" width="0.2032" layer="1"/>
 
<wire x1="12.677075" y1="16.868075" x2="12.319" y2="16.51" width="0.2032" layer="1"/>
 
<wire x1="12.319" y1="16.51" x2="12.319" y2="13.081" width="0.2032" layer="1"/>
 
<wire x1="12.319" y1="13.081" x2="12.192" y2="12.954" width="0.2032" layer="1"/>
 
<wire x1="12.192" y1="9.086" x2="12.2425" y2="9.0355" width="0" layer="19" extent="1-1"/>
 
<wire x1="12.993125" y1="16.868075" x2="12.582675" y2="16.868075" width="0.2032" layer="1"/>
 
<wire x1="12.582675" y1="16.868075" x2="12.3825" y2="16.6679" width="0.2032" layer="1"/>
 
<wire x1="12.192" y1="9.9695" x2="12.134" y2="9.9115" width="0.2032" layer="1"/>
 
<wire x1="12.134" y1="9.9115" x2="12.134" y2="9.144" width="0.2032" layer="1"/>
 
<wire x1="12.3825" y1="16.6679" x2="12.3825" y2="15.24" width="0.2032" layer="1"/>
 
<wire x1="12.192" y1="9.9695" x2="12.3825" y2="10.16" width="0.2032" layer="16"/>
 
<wire x1="12.3825" y1="10.16" x2="12.3825" y2="15.24" width="0.2032" layer="16"/>
 
<wire x1="12.2425" y1="9.0355" x2="12.134" y2="9.144" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="N$1">
 
<contactref element="U1" pad="4"/>
 
<wire x1="15.69" y1="9.0355" x2="15.69" y2="8.098075" width="0.3048" layer="1"/>
 
<wire x1="15.69" y1="9.0355" x2="15.69" y2="8.012" width="0.3048" layer="1"/>
 
<contactref element="C0" pad="2"/>
 
<contactref element="LCHOKE" pad="1"/>
 
<wire x1="15.69" y1="8.098075" x2="15.084925" y2="8.098075" width="0.3048" layer="1"/>
 
<wire x1="15.084925" y1="8.098075" x2="15.055" y2="8.128" width="0.3048" layer="1"/>
 
<wire x1="15.69" y1="8.098075" x2="15.679" y2="8.128" width="0" layer="19" extent="1-1"/>
 
<wire x1="15.69" y1="8.012" x2="15.679" y2="8.001" width="0.3048" layer="1"/>
 
<wire x1="15.679" y1="8.001" x2="14.928" y2="8.001" width="0.3048" layer="1"/>
 
</signal>
 
<signal name="N$9">
 
<contactref element="C0" pad="1"/>
 
<contactref element="L0" pad="2"/>
 
<wire x1="13.462" y1="8.197" x2="14.086" y2="8.197" width="0.3048" layer="1"/>
 
<wire x1="14.086" y1="8.197" x2="14.155" y2="8.128" width="0.3048" layer="1"/>
 
<wire x1="13.208" y1="8.07" x2="13.959" y2="8.07" width="0.3048" layer="1"/>
 
<wire x1="13.959" y1="8.07" x2="14.028" y2="8.001" width="0.3048" layer="1"/>
 
</signal>
 
<signal name="N$10">
 
<contactref element="CM" pad="1"/>
 
<contactref element="L0" pad="1"/>
 
<contactref element="LM1" pad="2"/>
 
<wire x1="13.462" y1="7.297" x2="14.097" y2="7.297" width="0.3048" layer="1"/>
 
<wire x1="14.097" y1="7.297" x2="14.155" y2="7.239" width="0.3048" layer="1"/>
 
<wire x1="13.462" y1="7.297" x2="13.462" y2="6.673" width="0.3048" layer="1"/>
 
<wire x1="13.208" y1="7.17" x2="13.97" y2="7.17" width="0.3048" layer="1"/>
 
<wire x1="13.97" y1="7.17" x2="14.028" y2="7.112" width="0.3048" layer="1"/>
 
<wire x1="13.208" y1="7.17" x2="13.208" y2="6.4825" width="0.3048" layer="1"/>
 
</signal>
 
<signal name="N$15">
 
<contactref element="CM1" pad="1"/>
 
<contactref element="LM1" pad="1"/>
 
<contactref element="LM2" pad="2"/>
 
<wire x1="13.462" y1="5.773" x2="13.462" y2="5.149" width="0.3048" layer="1"/>
 
<wire x1="13.462" y1="5.773" x2="14.155" y2="5.773" width="0.3048" layer="1"/>
 
<wire x1="14.155" y1="5.773" x2="14.155" y2="5.715" width="0.3048" layer="1"/>
 
<wire x1="13.208" y1="5.5825" x2="14.0225" y2="5.5825" width="0.3048" layer="1"/>
 
<wire x1="14.0225" y1="5.5825" x2="14.028" y2="5.588" width="0.3048" layer="1"/>
 
<wire x1="13.208" y1="5.5825" x2="13.208" y2="4.895" width="0.3048" layer="1"/>
 
</signal>
 
<signal name="N$21">
 
<contactref element="U1" pad="17"/>
 
<contactref element="C4" pad="1"/>
 
<wire x1="13.22" y1="11.5055" x2="11.7355" y2="11.5055" width="0.2032" layer="1"/>
 
<wire x1="11.7355" y1="11.5055" x2="11.43" y2="11.811" width="0.2032" layer="1"/>
 
<wire x1="11.43" y1="11.811" x2="11.43" y2="13.774" width="0.2032" layer="1"/>
 
<wire x1="13.22" y1="11.5055" x2="11.8625" y2="11.5055" width="0.2032" layer="1"/>
 
<wire x1="11.8625" y1="11.5055" x2="11.2395" y2="12.1285" width="0.2032" layer="1"/>
 
<wire x1="11.2395" y1="12.9485" x2="11.2395" y2="12.1285" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="GPSVCC">
 
<contactref element="U7" pad="9_V_RESET"/>
 
<contactref element="U7" pad="8_VCC"/>
 
<contactref element="U7" pad="7_VCC_IO"/>
 
<wire x1="20.0249" y1="11.829" x2="18.858646875" y2="11.829" width="0.2032" layer="16"/>
 
<wire x1="18.858646875" y1="11.829" x2="18.7325" y2="11.955146875" width="0.2032" layer="16"/>
 
<wire x1="18.7325" y1="11.955146875" x2="18.7325" y2="12.879" width="0.2032" layer="16"/>
 
<wire x1="18.7325" y1="12.879" x2="18.7325" y2="13.97" width="0.2032" layer="16"/>
 
<wire x1="18.7325" y1="13.97" x2="20.0159" y2="13.97" width="0.2032" layer="16"/>
 
<wire x1="20.0249" y1="11.829" x2="18.922146875" y2="11.829" width="0.2032" layer="16"/>
 
<wire x1="18.922146875" y1="11.829" x2="18.796" y2="11.955146875" width="0.2032" layer="16"/>
 
<wire x1="18.796" y1="11.955146875" x2="18.796" y2="12.879" width="0.2032" layer="16"/>
 
<wire x1="18.796" y1="12.879" x2="18.796" y2="13.97" width="0.2032" layer="16"/>
 
<wire x1="18.796" y1="13.97" x2="20.0159" y2="13.97" width="0.2032" layer="16"/>
 
<wire x1="20.0159" y1="13.97" x2="20.0249" y2="13.979" width="0.2032" layer="16"/>
 
<via x="18.176875" y="15.5575" extent="1-16" drill="0.3302"/>
 
<wire x1="18.7325" y1="13.97" x2="18.7325" y2="15.001875" width="0.2032" layer="16"/>
 
<wire x1="18.7325" y1="15.001875" x2="18.176875" y2="15.5575" width="0.2032" layer="16"/>
 
<wire x1="20.0249" y1="12.879" x2="18.7325" y2="12.879" width="0.2032" layer="16"/>
 
<wire x1="18.796" y1="13.97" x2="18.796" y2="14.938375" width="0.2032" layer="16"/>
 
<wire x1="18.796" y1="14.938375" x2="18.176875" y2="15.5575" width="0.2032" layer="16"/>
 
<wire x1="20.0249" y1="12.879" x2="18.796" y2="12.879" width="0.2032" layer="16"/>
 
<contactref element="Q2" pad="3"/>
 
<contactref element="C7" pad="1"/>
 
<wire x1="18.981" y1="15.494" x2="18.240375" y2="15.494" width="0.2032" layer="1"/>
 
<wire x1="18.240375" y1="15.494" x2="18.176875" y2="15.5575" width="0.2032" layer="1"/>
 
<wire x1="19.812" y1="16.6208" x2="19.4148" y2="16.6208" width="0.2032" layer="1"/>
 
<wire x1="19.4148" y1="16.6208" x2="18.981" y2="16.187" width="0.2032" layer="1"/>
 
<wire x1="18.981" y1="15.494" x2="18.981" y2="16.187" width="0.2032" layer="1"/>
 
<wire x1="19.812" y1="16.4938" x2="19.4148" y2="16.4938" width="0.2032" layer="1"/>
 
<wire x1="19.4148" y1="16.4938" x2="18.981" y2="16.06" width="0.2032" layer="1"/>
 
<wire x1="18.981" y1="15.494" x2="18.981" y2="16.06" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="GPS_EN_GATE">
 
<contactref element="R8" pad="2"/>
 
<contactref element="R9" pad="1"/>
 
<contactref element="Q2" pad="1"/>
 
<wire x1="20.262" y1="19.685" x2="20.262" y2="18.923" width="0.2032" layer="1"/>
 
<wire x1="20.262" y1="18.923" x2="20.262" y2="18.024" width="0.2032" layer="1"/>
 
<wire x1="20.262" y1="18.024" x2="20.312" y2="17.974" width="0.2032" layer="1"/>
 
<wire x1="20.262" y1="19.7485" x2="20.262" y2="18.796" width="0.2032" layer="1"/>
 
<wire x1="20.262" y1="18.796" x2="20.262" y2="17.897" width="0.2032" layer="1"/>
 
<wire x1="20.262" y1="17.897" x2="20.312" y2="17.847" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="GPS_FEED">
 
<contactref element="U7" pad="11_RF_IN"/>
 
<contactref element="U$4" pad="FEED"/>
 
<wire x1="7.9375" y1="12.855575" x2="10.501475" y2="12.855575" width="0.254" layer="16"/>
 
<wire x1="7.1755" y1="12.855575" x2="10.501475" y2="12.855575" width="0.254" layer="16"/>
 
<wire x1="10.501475" y1="12.855575" x2="10.5249" y2="12.879" width="0.2032" layer="16"/>
 
</signal>
 
<signal name="TIMEPULSE">
 
@@ -1657,18 +1653,12 @@ Please make sure your boards conform to
 
<contactref element="U7" pad="3_RXD1"/>
 
<contactref element="U6" pad="8"/>
 
<via x="16.256" y="18.415" extent="1-16" drill="0.3302"/>
 
<wire x1="20.0249" y1="18.379" x2="19.594" y2="18.379" width="0.2032" layer="16"/>
 
<wire x1="19.594" y1="18.379" x2="19.304" y2="18.669" width="0.2032" layer="16"/>
 
<wire x1="19.304" y1="18.669" x2="19.05" y2="18.669" width="0.2032" layer="16"/>
 
<wire x1="19.05" y1="18.669" x2="18.415" y2="19.304" width="0.2032" layer="16"/>
 
<wire x1="16.593125" y1="19.468075" x2="16.593125" y2="19.133125" width="0.2032" layer="1"/>
 
<wire x1="16.593125" y1="19.133125" x2="16.383" y2="18.923" width="0.2032" layer="1"/>
 
<wire x1="16.383" y1="18.923" x2="16.383" y2="18.542" width="0.2032" layer="1"/>
 
<wire x1="16.383" y1="18.542" x2="16.256" y2="18.415" width="0.2032" layer="1"/>
 
<wire x1="18.415" y1="19.304" x2="17.018" y2="19.304" width="0.2032" layer="16"/>
 
<wire x1="17.018" y1="19.304" x2="16.51" y2="18.796" width="0.2032" layer="16"/>
 
<wire x1="16.51" y1="18.796" x2="16.51" y2="18.669" width="0.2032" layer="16"/>
 
<wire x1="16.51" y1="18.669" x2="16.256" y2="18.415" width="0.2032" layer="16"/>
 
<wire x1="20.0249" y1="18.379" x2="16.292" y2="18.379" width="0.2032" layer="16"/>
 
<wire x1="16.292" y1="18.379" x2="16.256" y2="18.415" width="0.2032" layer="16"/>
 
</signal>
 
<signal name="GPS-TX">
 
<contactref element="U7" pad="2_TXD1"/>
 
@@ -1677,12 +1667,8 @@ Please make sure your boards conform to
 
<wire x1="16.093125" y1="19.468075" x2="16.093125" y2="19.141125" width="0.2032" layer="1"/>
 
<wire x1="16.093125" y1="19.141125" x2="15.494" y2="18.542" width="0.2032" layer="1"/>
 
<wire x1="14.986" y1="18.542" x2="15.494" y2="18.542" width="0.2032" layer="1"/>
 
<wire x1="14.986" y1="18.542" x2="15.494" y2="19.05" width="0.2032" layer="16"/>
 
<wire x1="15.494" y1="19.05" x2="15.923" y2="19.479" width="0.2032" layer="16"/>
 
<wire x1="20.0249" y1="19.479" x2="19.51" y2="19.479" width="0.2032" layer="16"/>
 
<wire x1="19.51" y1="19.479" x2="19.304" y2="19.685" width="0.2032" layer="16"/>
 
<wire x1="19.304" y1="19.685" x2="16.129" y2="19.685" width="0.2032" layer="16"/>
 
<wire x1="16.129" y1="19.685" x2="15.923" y2="19.479" width="0.2032" layer="16"/>
 
<wire x1="20.0249" y1="19.479" x2="15.923" y2="19.479" width="0.2032" layer="16"/>
 
<wire x1="15.923" y1="19.479" x2="14.986" y2="18.542" width="0.2032" layer="16"/>
 
</signal>
 
<signal name="GPS-EN">
 
<contactref element="U6" pad="7"/>
 
@@ -1690,30 +1676,30 @@ Please make sure your boards conform to
 
<wire x1="17.193125" y1="18.868075" x2="17.558134375" y2="18.868075" width="0.2032" layer="1"/>
 
<wire x1="17.558134375" y1="18.868075" x2="17.78" y2="19.089940625" width="0.2032" layer="1"/>
 
<wire x1="17.78" y1="19.089940625" x2="17.78" y2="19.304" width="0.2032" layer="1"/>
 
<wire x1="17.78" y1="19.304" x2="18.161" y2="19.685" width="0.2032" layer="1"/>
 
<wire x1="19.362" y1="19.685" x2="18.161" y2="19.685" width="0.2032" layer="1"/>
 
<wire x1="17.78" y1="19.304" x2="18.2245" y2="19.7485" width="0.2032" layer="1"/>
 
<wire x1="19.362" y1="19.7485" x2="18.2245" y2="19.7485" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="RADIO-MOSI">
 
<contactref element="U6" pad="26"/>
 
<contactref element="U1" pad="14"/>
 
<wire x1="14.69" y1="12.9755" x2="14.69" y2="13.885" width="0.2032" layer="1"/>
 
<wire x1="14.69" y1="13.885" x2="14.605" y2="13.97" width="0.2032" layer="1"/>
 
<via x="14.605" y="13.97" extent="1-16" drill="0.3302"/>
 
<wire x1="14.69" y1="12.9755" x2="14.69" y2="14.139" width="0.2032" layer="1"/>
 
<wire x1="14.69" y1="14.139" x2="14.605" y2="14.224" width="0.2032" layer="1"/>
 
<via x="14.605" y="14.224" extent="1-16" drill="0.3302"/>
 
<via x="15.875" y="14.316075" extent="1-16" drill="0.3302"/>
 
<wire x1="15.593125" y1="14.59795" x2="15.875" y2="14.316075" width="0.2032" layer="1"/>
 
<wire x1="14.605" y1="13.97" x2="15.528925" y2="13.97" width="0.2032" layer="16"/>
 
<wire x1="15.528925" y1="13.97" x2="15.875" y2="14.316075" width="0.2032" layer="16"/>
 
<wire x1="14.605" y1="14.224" x2="15.782925" y2="14.224" width="0.2032" layer="16"/>
 
<wire x1="15.782925" y1="14.224" x2="15.875" y2="14.316075" width="0.2032" layer="16"/>
 
<wire x1="15.593125" y1="14.59795" x2="15.593125" y2="15.268075" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="RADIO-MISO">
 
<contactref element="U6" pad="25"/>
 
<contactref element="U1" pad="13"/>
 
<wire x1="15.179675" y1="13.65885" x2="15.24" y2="13.719175" width="0.2032" layer="1"/>
 
<wire x1="15.24" y1="13.719175" x2="15.24" y2="14.2875" width="0.2032" layer="1"/>
 
<wire x1="15.24" y1="13.719175" x2="15.24" y2="14.5415" width="0.2032" layer="1"/>
 
<wire x1="15.19" y1="12.9755" x2="15.179675" y2="12.985825" width="0.2032" layer="1"/>
 
<wire x1="15.093125" y1="15.268075" x2="15.110625" y2="15.250575" width="0.2032" layer="1"/>
 
<wire x1="15.24" y1="14.2875" x2="15.093125" y2="14.434375" width="0.2032" layer="1"/>
 
<wire x1="15.093125" y1="14.434375" x2="15.093125" y2="15.268075" width="0.2032" layer="1"/>
 
<wire x1="15.24" y1="14.5415" x2="15.093125" y2="14.688375" width="0.2032" layer="1"/>
 
<wire x1="15.093125" y1="14.688375" x2="15.093125" y2="15.268075" width="0.2032" layer="1"/>
 
<wire x1="15.179675" y1="12.985825" x2="15.179675" y2="13.65885" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="RADIO-SCK">
 
@@ -1733,22 +1719,22 @@ Please make sure your boards conform to
 
<signal name="RADIO-NSS">
 
<contactref element="U6" pad="23"/>
 
<contactref element="U1" pad="15"/>
 
<wire x1="14.19" y1="12.9755" x2="14.19" y2="13.4325" width="0.2032" layer="1"/>
 
<wire x1="14.19" y1="13.4325" x2="13.97" y2="13.6525" width="0.2032" layer="1"/>
 
<wire x1="13.97" y1="13.6525" x2="13.97" y2="14.2875" width="0.2032" layer="1"/>
 
<wire x1="14.19" y1="12.9755" x2="14.19" y2="13.6865" width="0.2032" layer="1"/>
 
<wire x1="14.19" y1="13.6865" x2="13.97" y2="13.9065" width="0.2032" layer="1"/>
 
<wire x1="13.97" y1="13.9065" x2="13.97" y2="14.5415" width="0.2032" layer="1"/>
 
<wire x1="14.110625" y1="15.250575" x2="14.093125" y2="15.268075" width="0.2032" layer="1"/>
 
<wire x1="13.97" y1="14.2875" x2="14.093125" y2="14.410625" width="0.2032" layer="1"/>
 
<wire x1="14.093125" y1="14.410625" x2="14.093125" y2="15.268075" width="0.2032" layer="1"/>
 
<wire x1="13.97" y1="14.5415" x2="14.093125" y2="14.664625" width="0.2032" layer="1"/>
 
<wire x1="14.093125" y1="14.664625" x2="14.093125" y2="15.268075" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="SWCLK">
 
<contactref element="U6" pad="22"/>
 
<via x="13.49375" y="13.096875" extent="1-16" drill="0.3302"/>
 
<contactref element="J1" pad="3"/>
 
<wire x1="13.731875" y1="12.85875" x2="15.573375" y2="12.85875" width="0.2032" layer="16"/>
 
<wire x1="13.49375" y1="14.44625" x2="13.49375" y2="13.096875" width="0.2032" layer="1"/>
 
<wire x1="13.49375" y1="14.70025" x2="13.49375" y2="13.096875" width="0.2032" layer="1"/>
 
<wire x1="13.731875" y1="12.85875" x2="13.49375" y2="13.096875" width="0.2032" layer="16"/>
 
<wire x1="13.49375" y1="14.44625" x2="13.593125" y2="14.545625" width="0.2032" layer="1"/>
 
<wire x1="13.593125" y1="14.545625" x2="13.593125" y2="15.268075" width="0.2032" layer="1"/>
 
<wire x1="13.49375" y1="14.70025" x2="13.593125" y2="14.799625" width="0.2032" layer="1"/>
 
<wire x1="13.593125" y1="14.799625" x2="13.593125" y2="15.268075" width="0.2032" layer="1"/>
 
<wire x1="20.32" y1="9.017" x2="19.685" y2="9.017" width="0.2032" layer="16"/>
 
<wire x1="19.685" y1="9.017" x2="19.431" y2="9.271" width="0.2032" layer="16"/>
 
<wire x1="19.431" y1="9.271" x2="19.431" y2="9.906" width="0.2032" layer="16"/>
 
@@ -1764,9 +1750,9 @@ Please make sure your boards conform to
 
<wire x1="13.54455" y1="15.992475" x2="14.011275" y2="15.992475" width="0.2032" layer="1"/>
 
<wire x1="14.011275" y1="15.992475" x2="14.16685" y2="16.14805" width="0.2032" layer="1"/>
 
<contactref element="J1" pad="4"/>
 
<wire x1="14.319496875" y1="13.255625" x2="15.8115" y2="13.255625" width="0.2032" layer="16"/>
 
<wire x1="14.319496875" y1="13.255625" x2="13.731875" y2="13.843246875" width="0.2032" layer="16"/>
 
<wire x1="13.731875" y1="13.843246875" x2="13.731875" y2="15.71625" width="0.2032" layer="16"/>
 
<wire x1="14.573496875" y1="13.255625" x2="15.8115" y2="13.255625" width="0.2032" layer="16"/>
 
<wire x1="14.573496875" y1="13.255625" x2="13.731875" y2="14.097246875" width="0.2032" layer="16"/>
 
<wire x1="13.731875" y1="14.097246875" x2="13.731875" y2="15.71625" width="0.2032" layer="16"/>
 
<wire x1="13.731875" y1="15.71625" x2="14.16685" y2="16.151225" width="0.2032" layer="16"/>
 
<wire x1="14.16685" y1="16.151225" x2="14.16685" y2="16.14805" width="0.2032" layer="16"/>
 
<wire x1="20.32" y1="10.287" x2="19.558" y2="10.287" width="0.2032" layer="16"/>
 
@@ -1777,16 +1763,17 @@ Please make sure your boards conform to
 
<signal name="N$3">
 
<contactref element="U4" pad="1"/>
 
<contactref element="L1" pad="1"/>
 
<wire x1="16.811625" y1="7.3025" x2="17.129125" y2="7.3025" width="0.254" layer="16"/>
 
<wire x1="17.129125" y1="7.3025" x2="17.2085" y2="7.381875" width="0.254" layer="16"/>
 
<wire x1="17.2085" y1="7.381875" x2="17.2085" y2="9.37875" width="0.254" layer="16"/>
 
<wire x1="17.141625" y1="9.445625" x2="17.2085" y2="9.37875" width="0.254" layer="16"/>
 
<wire x1="16.811625" y1="7.3025" x2="16.9545" y2="7.3025" width="0.254" layer="16"/>
 
<wire x1="16.9545" y1="7.3025" x2="17.018" y2="7.366" width="0.254" layer="16"/>
 
<wire x1="17.018" y1="7.366" x2="17.018" y2="9.3855" width="0.254" layer="16"/>
 
<wire x1="17.018" y1="9.3855" x2="17.078125" y2="9.445625" width="0.254" layer="16"/>
 
</signal>
 
<signal name="N$5">
 
<contactref element="L1" pad="2"/>
 
<contactref element="U4" pad="6"/>
 
<wire x1="14.191625" y1="7.3025" x2="14.191625" y2="9.43375" width="0.254" layer="16"/>
 
<wire x1="14.191625" y1="9.43375" x2="13.941625" y2="9.445625" width="0" layer="19" extent="16-16"/>
 
<wire x1="14.191625" y1="9.43375" x2="14.17975" y2="9.445625" width="0.2032" layer="16"/>
 
<wire x1="14.17975" y1="9.445625" x2="13.878125" y2="9.445625" width="0.2032" layer="16"/>
 
</signal>
 
<signal name="N$11">
 
<polygon width="0" layer="16" pour="cutout">
 
@@ -1823,32 +1810,31 @@ Please make sure your boards conform to
 
<signal name="N$2">
 
<contactref element="D1" pad="A"/>
 
<contactref element="R4" pad="2"/>
 
<wire x1="10.98" y1="19.685" x2="10.98" y2="20.0725" width="0.2032" layer="1"/>
 
<wire x1="10.98" y1="20.0725" x2="11.211625" y2="20.558125" width="0.2032" layer="1"/>
 
<wire x1="10.6625" y1="20.6375" x2="10.634625" y2="20.609625" width="0.2032" layer="1"/>
 
<wire x1="10.634625" y1="20.609625" x2="9.667875" y2="20.609625" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="LED">
 
<contactref element="U6" pad="14"/>
 
<wire x1="13.593125" y1="19.468075" x2="11.917075" y2="19.468075" width="0.2032" layer="1"/>
 
<contactref element="R4" pad="1"/>
 
<wire x1="11.88" y1="19.685" x2="11.917075" y2="19.468075" width="0" layer="19" extent="1-1"/>
 
<wire x1="13.593125" y1="19.468075" x2="12.830359375" y2="19.468075" width="0.2032" layer="1"/>
 
<wire x1="12.830359375" y1="19.468075" x2="12.1285" y2="20.169934375" width="0.2032" layer="1"/>
 
<wire x1="12.1285" y1="20.169934375" x2="12.1285" y2="20.447" width="0.2032" layer="1"/>
 
<wire x1="12.1285" y1="20.447" x2="11.938" y2="20.6375" width="0.2032" layer="1"/>
 
<wire x1="11.938" y1="20.6375" x2="11.5625" y2="20.6375" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="VBATT_SENSE">
 
<contactref element="U6" pad="12"/>
 
<wire x1="14.605" y1="19.47995" x2="14.593125" y2="19.468075" width="0.254" layer="1"/>
 
<contactref element="R5" pad="2"/>
 
<contactref element="R6" pad="1"/>
 
<contactref element="C9" pad="1"/>
 
<wire x1="14.593125" y1="19.468075" x2="14.593125" y2="20.193" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="20.689125" x2="14.593125" y2="20.758125" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="20.758125" x2="14.663" y2="20.828" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="20.193" x2="14.166" y2="20.193" width="0.2032" layer="1"/>
 
<wire x1="14.166" y1="20.193" x2="14.039" y2="20.32" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="20.193" x2="16.06" y2="20.193" width="0.2032" layer="1"/>
 
<wire x1="16.06" y1="20.193" x2="16.187" y2="20.32" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="20.193" x2="14.593125" y2="20.689125" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="20.689125" x2="14.662125" y2="20.758125" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="20.758125" x2="14.662125" y2="20.758125" width="0.2032" layer="1"/>
 
<wire x1="14.662125" y1="20.758125" x2="14.732" y2="20.828" width="0.2032" layer="1"/>
 
<wire x1="15.298" y1="20.447" x2="14.547" y2="20.447" width="0.2032" layer="1"/>
 
<wire x1="16.949" y1="20.7645" x2="16.949" y2="20.77" width="0.2032" layer="1"/>
 
<wire x1="16.949" y1="20.77" x2="16.7005" y2="21.0185" width="0.2032" layer="1"/>
 
<wire x1="15.298" y1="20.447" x2="15.298" y2="20.87396875" width="0.2032" layer="1"/>
 
<wire x1="15.298" y1="20.87396875" x2="15.44253125" y2="21.0185" width="0.2032" layer="1"/>
 
<wire x1="15.44253125" y1="21.0185" x2="16.7005" y2="21.0185" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="19.468075" x2="14.593125" y2="20.400875" width="0.2032" layer="1"/>
 
<wire x1="14.593125" y1="20.400875" x2="14.547" y2="20.447" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="VBATT">
 
<contactref element="U4" pad="5"/>
 
@@ -1859,17 +1845,22 @@ Please make sure your boards conform to
 
<wire x1="14.191625" y1="5.4125" x2="14.201625" y2="5.4025" width="0.2032" layer="16"/>
 
<contactref element="C6" pad="1"/>
 
<contactref element="R5" pad="1"/>
 
<via x="12.446" y="20.193" extent="1-16" drill="0.3302"/>
 
<wire x1="13.139" y1="20.32" x2="12.446" y2="20.193" width="0.2032" layer="1"/>
 
<wire x1="12.827" y1="4.699" x2="12.827" y2="19.812" width="0.2032" layer="16"/>
 
<wire x1="12.827" y1="19.812" x2="12.446" y2="20.193" width="0.2032" layer="16"/>
 
<wire x1="11.283" y1="4.699" x2="12.827" y2="4.699" width="0.254" layer="16"/>
 
<via x="12.8905" y="20.2565" extent="1-16" drill="0.3302"/>
 
<wire x1="12.827" y1="14.605" x2="13.0175" y2="14.7955" width="0.2032" layer="16"/>
 
<wire x1="13.0175" y1="14.7955" x2="13.0175" y2="15.6845" width="0.2032" layer="16"/>
 
<wire x1="13.0175" y1="15.6845" x2="12.827" y2="15.875" width="0.2032" layer="16"/>
 
<wire x1="14.133125" y1="5.334" x2="14.201625" y2="5.4025" width="0.254" layer="16"/>
 
<wire x1="13.782" y1="3.81" x2="13.782" y2="4.826" width="0.254" layer="16"/>
 
<wire x1="13.782" y1="4.826" x2="13.782" y2="5.4025" width="0.254" layer="16"/>
 
<wire x1="13.782" y1="3.81" x2="13.782" y2="5.4025" width="0.254" layer="16"/>
 
<wire x1="13.782" y1="5.4025" x2="14.201625" y2="5.4025" width="0.254" layer="16"/>
 
<wire x1="12.827" y1="4.699" x2="13.655" y2="4.699" width="0.254" layer="16"/>
 
<wire x1="13.655" y1="4.699" x2="13.782" y2="4.826" width="0.254" layer="16"/>
 
<wire x1="12.8905" y1="20.2565" x2="12.827" y2="20.193" width="0.2032" layer="16"/>
 
<wire x1="12.827" y1="20.193" x2="12.827" y2="15.875" width="0.2032" layer="16"/>
 
<wire x1="13.647" y1="20.447" x2="13.081" y2="20.447" width="0.2032" layer="1"/>
 
<wire x1="13.081" y1="20.447" x2="12.8905" y2="20.2565" width="0.2032" layer="1"/>
 
<wire x1="12.827" y1="14.605" x2="12.827" y2="5.3975" width="0.2032" layer="16"/>
 
<wire x1="12.827" y1="5.3975" x2="14.196625" y2="5.3975" width="0.3048" layer="16"/>
 
<wire x1="14.196625" y1="5.3975" x2="14.201625" y2="5.4025" width="0.3048" layer="16"/>
 
<wire x1="10.7115" y1="5.207" x2="12.6365" y2="5.207" width="0.3048" layer="16"/>
 
<wire x1="12.6365" y1="5.207" x2="12.827" y2="5.3975" width="0.3048" layer="16"/>
 
</signal>
 
<signal name="N$8">
 
<polygon width="0" layer="1" pour="cutout">
 
@@ -1881,8 +1872,8 @@ Please make sure your boards conform to
 
</signal>
 
<signal name="N$24">
 
<polygon width="0" layer="16" pour="cutout">
 
<vertex x="13.335" y="21.1455"/>
 
<vertex x="17.145" y="21.1455"/>
 
<vertex x="13.335" y="21.082"/>
 
<vertex x="17.145" y="21.082"/>
 
<vertex x="17.145" y="21.9075"/>
 
<vertex x="13.335" y="21.9075"/>
 
</polygon>
 
@@ -1898,10 +1889,13 @@ Please make sure your boards conform to
 
<signal name="TCXO-EN">
 
<contactref element="U6" pad="18"/>
 
<contactref element="U3" pad="1"/>
 
<wire x1="12.993125" y1="17.368075" x2="12.669075" y2="17.368075" width="0.2032" layer="1"/>
 
<wire x1="12.669075" y1="17.368075" x2="11.938" y2="16.637" width="0.2032" layer="1"/>
 
<wire x1="11.938" y1="16.637" x2="10.591" y2="16.637" width="0.2032" layer="1"/>
 
<wire x1="10.591" y1="16.637" x2="9.893" y2="17.335" width="0.2032" layer="1"/>
 
<wire x1="9.639" y1="16.827" x2="9.843" y2="16.827" width="0.2032" layer="1"/>
 
<wire x1="9.843" y1="16.827" x2="10.541" y2="16.129" width="0.2032" layer="1"/>
 
<wire x1="10.541" y1="16.129" x2="11.811" y2="16.129" width="0.2032" layer="1"/>
 
<wire x1="11.811" y1="16.129" x2="11.938" y2="16.256" width="0.2032" layer="1"/>
 
<wire x1="12.993125" y1="17.368075" x2="12.3705125" y2="17.368075" width="0.2032" layer="1"/>
 
<wire x1="12.3705125" y1="17.368075" x2="11.938" y2="16.9355625" width="0.2032" layer="1"/>
 
<wire x1="11.938" y1="16.9355625" x2="11.938" y2="16.256" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="3.3V">
 
<contactref element="U5" pad="10"/>
 
@@ -1909,74 +1903,113 @@ Please make sure your boards conform to
 
<contactref element="C12" pad="1"/>
 
<contactref element="U5" pad="1"/>
 
<contactref element="U5" pad="6"/>
 
<wire x1="19.552" y1="5.034" x2="19.05" y2="5.034" width="0.2032" layer="1"/>
 
<wire x1="19.05" y1="5.034" x2="18.842" y2="5.034" width="0.2032" layer="1"/>
 
<wire x1="18.842" y1="5.034" x2="18.242" y2="5.634" width="0.2032" layer="1"/>
 
<wire x1="17.532" y1="5.634" x2="18.242" y2="5.634" width="0.2032" layer="1"/>
 
<wire x1="19.142" y1="4.324" x2="19.142" y2="4.942" width="0.2032" layer="1"/>
 
<wire x1="19.142" y1="4.942" x2="19.05" y2="5.034" width="0.2032" layer="1"/>
 
<wire x1="16.383" y1="5.83" x2="16.522" y2="5.83" width="0.2032" layer="1"/>
 
<wire x1="16.522" y1="5.83" x2="16.637" y2="5.715" width="0.2032" layer="1"/>
 
<wire x1="16.637" y1="5.715" x2="17.451" y2="5.715" width="0.2032" layer="1"/>
 
<wire x1="17.451" y1="5.715" x2="17.532" y2="5.634" width="0.2032" layer="1"/>
 
<wire x1="20.447" y1="5.022" x2="19.552" y2="5.022" width="0.2032" layer="1"/>
 
<wire x1="19.552" y1="5.022" x2="19.552" y2="5.034" width="0.2032" layer="1"/>
 
<wire x1="18.536" y1="5.034" x2="18.034" y2="5.034" width="0.2032" layer="1"/>
 
<wire x1="18.034" y1="5.034" x2="17.572" y2="5.034" width="0.2032" layer="1"/>
 
<wire x1="17.572" y1="5.034" x2="16.972" y2="5.634" width="0.2032" layer="1"/>
 
<wire x1="16.516" y1="5.634" x2="16.972" y2="5.634" width="0.2032" layer="1"/>
 
<wire x1="18.126" y1="4.324" x2="18.126" y2="4.942" width="0.2032" layer="1"/>
 
<wire x1="18.126" y1="4.942" x2="18.034" y2="5.034" width="0.2032" layer="1"/>
 
<wire x1="16.435" y1="5.715" x2="16.516" y2="5.634" width="0.2032" layer="1"/>
 
<wire x1="19.685" y1="5.022" x2="18.536" y2="5.022" width="0.2032" layer="1"/>
 
<wire x1="18.536" y1="5.022" x2="18.536" y2="5.034" width="0.2032" layer="1"/>
 
<wire x1="18.126" y1="4.324" x2="18.126" y2="3.001" width="0.2032" layer="1"/>
 
<wire x1="18.126" y1="3.001" x2="18.1095" y2="2.9845" width="0.2032" layer="1"/>
 
<wire x1="18.1095" y1="2.921" x2="18.126" y2="2.9375" width="0.2032" layer="1"/>
 
<wire x1="18.126" y1="2.9375" x2="18.126" y2="3.001" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="SDA">
 
<contactref element="U5" pad="4"/>
 
<contactref element="U6" pad="28"/>
 
<wire x1="16.593125" y1="15.268075" x2="17.497925" y2="15.268075" width="0.2032" layer="1"/>
 
<wire x1="17.497925" y1="15.268075" x2="17.907" y2="14.859" width="0.2032" layer="1"/>
 
<wire x1="17.907" y1="14.859" x2="19.431" y2="14.859" width="0.2032" layer="1"/>
 
<wire x1="19.431" y1="14.859" x2="20.193" y2="14.097" width="0.2032" layer="1"/>
 
<wire x1="20.193" y1="14.097" x2="20.193" y2="7.747" width="0.2032" layer="1"/>
 
<wire x1="18.542" y1="6.344" x2="18.542" y2="6.985" width="0.2032" layer="1"/>
 
<wire x1="18.542" y1="6.985" x2="18.669" y2="7.112" width="0.2032" layer="1"/>
 
<wire x1="18.669" y1="7.112" x2="19.558" y2="7.112" width="0.2032" layer="1"/>
 
<wire x1="19.558" y1="7.112" x2="20.193" y2="7.747" width="0.2032" layer="1"/>
 
<wire x1="17.907" y1="14.859" x2="19.304" y2="14.859" width="0.2032" layer="1"/>
 
<wire x1="19.304" y1="14.859" x2="20.066" y2="14.097" width="0.2032" layer="1"/>
 
<wire x1="20.066" y1="14.097" x2="20.066" y2="7.747" width="0.2032" layer="1"/>
 
<wire x1="17.526" y1="6.344" x2="17.526" y2="6.985" width="0.2032" layer="1"/>
 
<wire x1="17.526" y1="6.985" x2="17.653" y2="7.112" width="0.2032" layer="1"/>
 
<wire x1="17.653" y1="7.112" x2="19.431" y2="7.112" width="0.2032" layer="1"/>
 
<wire x1="19.431" y1="7.112" x2="20.066" y2="7.747" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="SCL">
 
<contactref element="U5" pad="2"/>
 
<contactref element="U6" pad="27"/>
 
<wire x1="16.093125" y1="15.268075" x2="16.093125" y2="14.9904125" width="0.2032" layer="1"/>
 
<wire x1="16.093125" y1="14.9904125" x2="16.4785375" y2="14.605" width="0.2032" layer="1"/>
 
<wire x1="16.4785375" y1="14.605" x2="17.399" y2="14.605" width="0.2032" layer="1"/>
 
<wire x1="17.399" y1="14.605" x2="17.526" y2="14.478" width="0.2032" layer="1"/>
 
<wire x1="17.526" y1="14.478" x2="19.304" y2="14.478" width="0.2032" layer="1"/>
 
<wire x1="19.304" y1="14.478" x2="19.812" y2="13.97" width="0.2032" layer="1"/>
 
<wire x1="19.812" y1="13.97" x2="19.812" y2="8.636" width="0.2032" layer="1"/>
 
<wire x1="19.812" y1="8.636" x2="19.558" y2="8.382" width="0.2032" layer="1"/>
 
<wire x1="19.552" y1="5.634" x2="19.558" y2="8.382" width="0" layer="19" extent="1-1"/>
 
<wire x1="17.526" y1="14.478" x2="18.923" y2="14.478" width="0.2032" layer="1"/>
 
<wire x1="18.923" y1="14.478" x2="19.431" y2="13.97" width="0.2032" layer="1"/>
 
<contactref element="R3" pad="2"/>
 
<wire x1="19.431" y1="13.97" x2="19.431" y2="12.573" width="0.2032" layer="1"/>
 
<wire x1="19.431" y1="12.573" x2="19.304" y2="12.446" width="0.2032" layer="1"/>
 
<wire x1="19.304" y1="12.446" x2="19.304" y2="12.053" width="0.2032" layer="1"/>
 
<wire x1="19.304" y1="12.053" x2="19.189" y2="11.938" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="N$4">
 
<contactref element="ANT" pad="1"/>
 
<contactref element="LM3" pad="1"/>
 
<wire x1="14.848625" y1="3.106" x2="15.287625" y2="2.667" width="0.3048" layer="1"/>
 
<wire x1="13.462" y1="2.725" x2="15.287625" y2="2.725" width="0.3048" layer="1"/>
 
<wire x1="15.287625" y1="2.725" x2="15.287625" y2="2.667" width="0.3048" layer="1"/>
 
<wire x1="15.287625" y1="2.725" x2="15.287625" y2="2.4765" width="0.3048" layer="1"/>
 
<wire x1="13.208" y1="2.4075" x2="15.218625" y2="2.4075" width="0.3048" layer="1"/>
 
<wire x1="15.218625" y1="2.4075" x2="15.287625" y2="2.4765" width="0.3048" layer="1"/>
 
</signal>
 
<signal name="N$6">
 
<contactref element="CM2" pad="1"/>
 
<contactref element="LM2" pad="1"/>
 
<contactref element="LM3" pad="2"/>
 
<wire x1="13.462" y1="4.249" x2="13.462" y2="3.625" width="0.3048" layer="1"/>
 
<wire x1="13.462" y1="4.249" x2="14.086" y2="4.249" width="0.3048" layer="1"/>
 
<wire x1="14.086" y1="4.249" x2="14.155" y2="4.318" width="0.3048" layer="1"/>
 
<wire x1="13.208" y1="3.995" x2="14.0225" y2="3.995" width="0.3048" layer="1"/>
 
<wire x1="14.0225" y1="3.995" x2="14.028" y2="4.0005" width="0.3048" layer="1"/>
 
<wire x1="13.208" y1="3.995" x2="13.208" y2="3.3075" width="0.3048" layer="1"/>
 
</signal>
 
<signal name="OSC_OUT">
 
<contactref element="U3" pad="3"/>
 
<contactref element="C4" pad="2"/>
 
<wire x1="11.443" y1="14.687" x2="11.43" y2="14.674" width="0.2032" layer="1"/>
 
<wire x1="11.443" y1="14.687" x2="11.443" y2="15.685" width="0.2032" layer="1"/>
 
<wire x1="11.189" y1="15.177" x2="11.2395" y2="15.1265" width="0.2032" layer="1"/>
 
<wire x1="11.2395" y1="15.1265" x2="11.2395" y2="13.8485" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="N$16">
 
<polygon width="0" layer="1" pour="cutout">
 
<vertex x="15.9385" y="19.812"/>
 
<vertex x="16.891" y="19.812"/>
 
<vertex x="16.891" y="20.2565"/>
 
<vertex x="15.9385" y="20.2565"/>
 
</polygon>
 
</signal>
 
<signal name="SCL-FLIP">
 
<contactref element="U5" pad="2"/>
 
<contactref element="R3" pad="1"/>
 
<wire x1="20.689" y1="11.938" x2="20.689" y2="6.465" width="0.2032" layer="1"/>
 
<wire x1="20.689" y1="6.465" x2="19.858" y2="5.634" width="0.2032" layer="1"/>
 
<wire x1="18.536" y1="5.634" x2="19.858" y2="5.634" width="0.2032" layer="1"/>
 
</signal>
 
<signal name="N$7">
 
<via x="17.018" y="2.667" extent="1-16" drill="0.508" alwaysstop="yes"/>
 
<polygon width="0" layer="1" pour="cutout">
 
<vertex x="8.6995" y="11.176"/>
 
<vertex x="7.874" y="11.176"/>
 
<vertex x="7.874" y="14.732"/>
 
<vertex x="8.6995" y="14.732"/>
 
</polygon>
 
</signal>
 
<signal name="N$17">
 
<polygon width="0" layer="1" pour="cutout">
 
<vertex x="19.304" y="11.049"/>
 
<vertex x="19.8755" y="11.049"/>
 
<vertex x="19.8755" y="11.557"/>
 
<vertex x="19.304" y="11.557"/>
 
</polygon>
 
</signal>
 
<signal name="N$18">
 
<polygon width="0" layer="1" pour="cutout">
 
<vertex x="12.0015" y="18.542"/>
 
<vertex x="12.5095" y="18.542"/>
 
<vertex x="12.5095" y="18.923"/>
 
<vertex x="12.0015" y="18.923"/>
 
</polygon>
 
</signal>
 
</signals>
 
<errors>
 
<approved hash="19,1,3a880b1c173c26a8"/>
 
<approved hash="19,1,277df909ff022176"/>
 
<approved hash="19,1,ff275b1c5fa3fb9a"/>
 
<approved hash="19,1,6e6017f410b46920"/>
 
</errors>
 
</board>
 
</drawing>

Changeset was too big and was cut off... Show full diff anyway

0 comments (0 inline, 0 general)
Server instance: zserverv-307515 This site is powered by Kallithea, which is © 2010–2021 by various authors & licensed under GPLv3. – Support