#include "stm32f0xx_hal.h"
#include "si5351.h"
#include "jtencode.h"
#include "gpio.h"
#include "wspr.h"
#include "config.h"


#define WSPR_DEFAULT_FREQ 10140100UL
#define WSPR_TONE_SPACING 146 // ~1.46 Hz
#define WSPR_CTC 10672 // CTC value for WSPR

// Test stuff
char call[7] = "KD8TDF";
char loc[5] = "EN72";
uint8_t dbm = 10;
uint8_t tx_buffer[255];

// Frequencies and channel info
uint32_t freq = WSPR_DEFAULT_FREQ;
uint8_t symbol_count = WSPR_SYMBOL_COUNT;
uint16_t ctc = WSPR_CTC;
uint16_t tone_spacing = WSPR_TONE_SPACING;
volatile uint8_t proceed = 0;

TIM_HandleTypeDef htim1;



void wspr_init(void)
{
    // Start timer for WSPR
    __TIM1_CLK_ENABLE();
    htim1.Instance = TIM1;
    htim1.Init.Prescaler = 512; // gives 64uS ticks from 8MHz ahbclk
    htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
    htim1.Init.Period = ctc; // Count up to this value (how many 64uS ticks per symbol)
    htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
    htim1.Init.RepetitionCounter = 0;
    HAL_TIM_Base_Init(&htim1);
    HAL_TIM_Base_Start_IT(&htim1);
    HAL_NVIC_SetPriority(TIM1_BRK_UP_TRG_COM_IRQn, 0, 0);
    HAL_NVIC_EnableIRQ(TIM1_BRK_UP_TRG_COM_IRQn);

}

// Do anything needed to prepare for sleep
void wspr_sleep(void)
{
    HAL_TIM_Base_Stop_IT(&htim1);
}

void wspr_wakeup(void)
{
    HAL_TIM_Base_Start_IT(&htim1);
}


// Bring up TCXO and oscillator IC
void wspr_transmit(void)
{
    HAL_GPIO_WritePin(OSC_NOTEN, 0);
    HAL_GPIO_WritePin(TCXO_EN, 1);
    HAL_Delay(100);

    // Bring up the chip
    si5351_init(i2c_get(), SI5351_CRYSTAL_LOAD_8PF, 0);
    si5351_set_correction(0);
    //si5351_set_pll(SI5351_PLL_FIXED, SI5351_PLLA);
    //si5351_set_ms_source(SI5351_CLK0, SI5351_PLLA);
    si5351_set_freq(WSPR_DEFAULT_FREQ * 100, 0, SI5351_CLK0);
    si5351_drive_strength(SI5351_CLK0, SI5351_DRIVE_8MA); // Set for max power if desired (8ma max)
    si5351_output_enable(SI5351_CLK0, 1);
    //si5351_pll_reset(SI5351_PLLA);

    // Make sure the other outputs of the SI5351 are disabled
    si5351_output_enable(SI5351_CLK1, 0); // Disable the clock initially
    si5351_output_enable(SI5351_CLK2, 0); // Disable the clock initially

    // disable clock powers
    si5351_set_clock_pwr(SI5351_CLK1, 0);
    si5351_set_clock_pwr(SI5351_CLK2, 0);


    // Encode message to transmit
    wspr_encode(call, loc, dbm, tx_buffer);

    // Key transmitter
    si5351_output_enable(SI5351_CLK0, 1);

    // Loop through and transmit symbols TODO: Do this from an ISR or ISR-triggered main loop function call (optimal)
    uint8_t i;
    for(i=0; i<symbol_count; i++)
    {
        uint32_t freq2 = (freq * 100) + (tx_buffer[i] * tone_spacing);
        si5351_set_freq(freq2, 0, SI5351_CLK0);
        HAL_GPIO_TogglePin(LED_BLUE);

        proceed = 0;
        while(!proceed);
    }

    // Disable transmitter
    si5351_output_enable(SI5351_CLK0, 0);

    HAL_GPIO_WritePin(OSC_NOTEN, 1);
    HAL_GPIO_WritePin(TCXO_EN, 0);
}