FeatherHAB/wsprhab Changeset - 4202475a7575

Changeset - 4202475a7575

Parent rev.

Child rev.

[Not reviewed]

default

3 8 2

Ethan Zonca - 10 years ago 2016-03-25 22:55:08
ez@ethanzonca.com

Refactor and remove garbage

11 files changed with 41 insertions and 507 deletions:

Makefile

inc/adc.h

inc/dma.h

inc/i2c.h

inc/interrupts.h

inc/usart.h

src/adc.c

122

src/dma.c

src/interrupts.c

src/main.c

src/stm32f0xx_hal_msp.c

0 comments (0 inline, 0 general)

Makefile

➞

Show inline comments

@@ @@ -8,13 +8,13 @@ @@
 # user configuration:
 #######################################
 BUILD_NUMBER ?= 0
 # SOURCES: list of sources in the user application
-SOURCES = main.c system_stm32f0xx.c adc.c dma.c gpio.c i2c.c stm32f0xx_hal_msp.c stm32f0xx_it.c usart.c  gps.c
+SOURCES = main.c system_stm32f0xx.c adc.c dma.c gpio.c i2c.c interrupts.c usart.c  gps.c
 # TARGET: name of the user application
 TARGET = wsprhab-b$(BUILD_NUMBER)
 # BUILD_DIR: directory to place output files in
 BUILD_DIR = build

inc/adc.h

➞

Show inline comments

 /**
   ******************************************************************************
   * File Name          : ADC.h
   * Description        : This file provides code for the configuration
   *                      of the ADC instances.
   ******************************************************************************
+  *
   * COPYRIGHT(c) 2016 STMicroelectronics
+  *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
   *   1. Redistributions of source code must retain the above copyright notice,
   *      this list of conditions and the following disclaimer.
   *   2. Redistributions in binary form must reproduce the above copyright notice,
   *      this list of conditions and the following disclaimer in the documentation
   *      and/or other materials provided with the distribution.
   *   3. Neither the name of STMicroelectronics nor the names of its contributors
   *      may be used to endorse or promote products derived from this software
   *      without specific prior written permission.
+  *
   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
   ******************************************************************************
   */
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __adc_H
 #define __adc_H
 #ifdef __cplusplus
  extern "C" {
 #endif
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f0xx_hal.h"
 /* USER CODE BEGIN Includes */
 /* USER CODE END Includes */
 extern ADC_HandleTypeDef hadc;
 /* USER CODE BEGIN Private defines */
 /* USER CODE END Private defines */
 void MX_ADC_Init(void);
 /* USER CODE BEGIN Prototypes */
 /* USER CODE END Prototypes */
 void adc_init(void);
 #ifdef __cplusplus
+}
 #endif
 #endif /*__ adc_H */
 /**
   * @}
   */
 /**
   * @}
   */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

inc/dma.h

➞

Show inline comments

 /**
   ******************************************************************************
   * File Name          : dma.h
   * Description        : This file contains all the function prototypes for
   *                      the dma.c file
   ******************************************************************************
+  *
   * COPYRIGHT(c) 2016 STMicroelectronics
+  *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
   *   1. Redistributions of source code must retain the above copyright notice,
   *      this list of conditions and the following disclaimer.
   *   2. Redistributions in binary form must reproduce the above copyright notice,
   *      this list of conditions and the following disclaimer in the documentation
   *      and/or other materials provided with the distribution.
   *   3. Neither the name of STMicroelectronics nor the names of its contributors
   *      may be used to endorse or promote products derived from this software
   *      without specific prior written permission.
+  *
   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
   ******************************************************************************
   */
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __dma_H
 #define __dma_H
 #ifdef __cplusplus
  extern "C" {
 #endif
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f0xx_hal.h"
 /* DMA memory to memory transfer handles -------------------------------------*/
 /* USER CODE BEGIN Includes */
 /* USER CODE END Includes */
 /* USER CODE BEGIN Private defines */
 /* USER CODE END Private defines */
 void MX_DMA_Init(void);
 /* USER CODE BEGIN Prototypes */
 void dma_init(void);
 /* USER CODE END Prototypes */
 #ifdef __cplusplus
+}
 #endif
 #endif /* __dma_H */
 /**
   * @}
   */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

inc/i2c.h

➞

Show inline comments

@@ @@ -3,8 +3,8 @@ @@
 #include "stm32f0xx_hal.h"
 void i2c_init(void);
 I2C_HandleTypeDef* i2c_get(void);
-#endif /*__ i2c_H */
 #endif

inc/interrupts.h

➞

Show inline comments

@@ file renamed from inc/stm32f0xx_it.h to inc/interrupts.h @@
 /**
   ******************************************************************************
   * @file    stm32f0xx_it.h
   * @brief   This file contains the headers of the interrupt handlers.
   ******************************************************************************
+  *
   * COPYRIGHT(c) 2016 STMicroelectronics
+  *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
   *   1. Redistributions of source code must retain the above copyright notice,
   *      this list of conditions and the following disclaimer.
   *   2. Redistributions in binary form must reproduce the above copyright notice,
   *      this list of conditions and the following disclaimer in the documentation
   *      and/or other materials provided with the distribution.
   *   3. Neither the name of STMicroelectronics nor the names of its contributors
   *      may be used to endorse or promote products derived from this software
   *      without specific prior written permission.
+  *
   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
   ******************************************************************************
   */
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F0xx_IT_H
 #define __STM32F0xx_IT_H
 #ifdef __cplusplus
  extern "C" {
 #endif
 /* Includes ------------------------------------------------------------------*/
 /* Exported types ------------------------------------------------------------*/
 /* Exported constants --------------------------------------------------------*/
 /* Exported macro ------------------------------------------------------------*/
 /* Exported functions ------------------------------------------------------- */
 void SysTick_Handler(void);
 void DMA1_Channel2_3_IRQHandler(void);
 void USART1_IRQHandler(void);
 #ifdef __cplusplus
+}
 #endif
 #endif /* __STM32F0xx_IT_H */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
 #endif

inc/usart.h

➞

Show inline comments

 /**
   ******************************************************************************
   * File Name          : USART.h
   * Description        : This file provides code for the configuration
   *                      of the USART instances.
   ******************************************************************************
+  *
   * COPYRIGHT(c) 2016 STMicroelectronics
+  *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
   *   1. Redistributions of source code must retain the above copyright notice,
   *      this list of conditions and the following disclaimer.
   *   2. Redistributions in binary form must reproduce the above copyright notice,
   *      this list of conditions and the following disclaimer in the documentation
   *      and/or other materials provided with the distribution.
   *   3. Neither the name of STMicroelectronics nor the names of its contributors
   *      may be used to endorse or promote products derived from this software
   *      without specific prior written permission.
+  *
   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
   ******************************************************************************
   */
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __usart_H
 #define __usart_H
 #ifdef __cplusplus
  extern "C" {
 #endif
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f0xx_hal.h"
 /* USER CODE BEGIN Includes */
 /* USER CODE END Includes */
 extern UART_HandleTypeDef huart1;
 /* USER CODE BEGIN Private defines */
 /* USER CODE END Private defines */
 void MX_USART1_UART_Init(void);
 /* USER CODE BEGIN Prototypes */
 /* USER CODE END Prototypes */
 #ifdef __cplusplus
+}
 #endif
 #endif /*__ usart_H */
 /**
   * @}
   */
 /**
   * @}
   */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
 #endif

src/adc.c

➞

Show inline comments

 /**
   ******************************************************************************
   * File Name          : ADC.c
   * Description        : This file provides code for the configuration
   *                      of the ADC instances.
   ******************************************************************************
+  *
   * COPYRIGHT(c) 2016 STMicroelectronics
+  *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
   *   1. Redistributions of source code must retain the above copyright notice,
   *      this list of conditions and the following disclaimer.
   *   2. Redistributions in binary form must reproduce the above copyright notice,
   *      this list of conditions and the following disclaimer in the documentation
   *      and/or other materials provided with the distribution.
   *   3. Neither the name of STMicroelectronics nor the names of its contributors
   *      may be used to endorse or promote products derived from this software
   *      without specific prior written permission.
+  *
   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
   ******************************************************************************
   */
 /* Includes ------------------------------------------------------------------*/
 #include "stm32f0xx_hal.h"
 #include "adc.h"
 #include "gpio.h"
 /* USER CODE BEGIN 0 */
 /* USER CODE END 0 */
 ADC_HandleTypeDef hadc;
 /* ADC init function */
 void MX_ADC_Init(void)
 // Initialize ADC
 void adc_init(void)
+{
   ADC_ChannelConfTypeDef sConfig;
     /**Configure the global features of the ADC (Clock, Resolution, Data Alignment and number of conversion)
     */
   hadc.Instance = ADC1;
   hadc.Init.ClockPrescaler = ADC_CLOCK_ASYNC;
   hadc.Init.Resolution = ADC_RESOLUTION12b;
   hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
   hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
   hadc.Init.EOCSelection = EOC_SINGLE_CONV;
   hadc.Init.LowPowerAutoWait = DISABLE;
   hadc.Init.LowPowerAutoPowerOff = DISABLE;
   hadc.Init.ContinuousConvMode = DISABLE;
   hadc.Init.DiscontinuousConvMode = DISABLE;
   hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
   hadc.Init.DMAContinuousRequests = DISABLE;
   hadc.Init.Overrun = OVR_DATA_PRESERVED;
   HAL_ADC_Init(&hadc);
     __ADC1_CLK_ENABLE();
     /**Configure for the selected ADC regular channel to be converted.
     */
   sConfig.Channel = ADC_CHANNEL_6;
   sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
   sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
   HAL_ADC_ConfigChannel(&hadc, &sConfig);
+}
 void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
+{
   GPIO_InitTypeDef GPIO_InitStruct;
   if(hadc->Instance==ADC1)
+  {
   /* USER CODE BEGIN ADC1_MspInit 0 */
   /* USER CODE END ADC1_MspInit 0 */
     /* Peripheral clock enable */
     __ADC1_CLK_ENABLE();
     /**ADC GPIO Configuration
     PA6     ------> ADC_IN6
     */
     GPIO_InitTypeDef GPIO_InitStruct;
     GPIO_InitStruct.Pin = VBATT_SENSE_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
     GPIO_InitStruct.Pull = GPIO_NOPULL;
     HAL_GPIO_Init(VBATT_SENSE_GPIO_Port, &GPIO_InitStruct);
   /* USER CODE BEGIN ADC1_MspInit 1 */
     ADC_ChannelConfTypeDef sConfig;
     hadc.Instance = ADC1;
     hadc.Init.ClockPrescaler = ADC_CLOCK_ASYNC;
     hadc.Init.Resolution = ADC_RESOLUTION12b;
     hadc.Init.DataAlign = ADC_DATAALIGN_RIGHT;
     hadc.Init.ScanConvMode = ADC_SCAN_DIRECTION_FORWARD;
     hadc.Init.EOCSelection = EOC_SINGLE_CONV;
     hadc.Init.LowPowerAutoWait = DISABLE;
     hadc.Init.LowPowerAutoPowerOff = DISABLE;
     hadc.Init.ContinuousConvMode = DISABLE;
     hadc.Init.DiscontinuousConvMode = DISABLE;
     hadc.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
     hadc.Init.DMAContinuousRequests = DISABLE;
     hadc.Init.Overrun = OVR_DATA_PRESERVED;
     HAL_ADC_Init(&hadc);
   /* USER CODE END ADC1_MspInit 1 */
+  }
     sConfig.Channel = ADC_CHANNEL_6;
     sConfig.Rank = ADC_RANK_CHANNEL_NUMBER;
     sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
     HAL_ADC_ConfigChannel(&hadc, &sConfig);
+}
 void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
+{
   if(hadc->Instance==ADC1)
+  {
   /* USER CODE BEGIN ADC1_MspDeInit 0 */
   /* USER CODE END ADC1_MspDeInit 0 */
     /* Peripheral clock disable */
     __ADC1_CLK_DISABLE();
     /**ADC GPIO Configuration
     PA6     ------> ADC_IN6
     */
     HAL_GPIO_DeInit(VBATT_SENSE_GPIO_Port, VBATT_SENSE_Pin);
+  }
   /* USER CODE BEGIN ADC1_MspDeInit 1 */
   /* USER CODE END ADC1_MspDeInit 1 */
+}
 /* USER CODE BEGIN 1 */
 /* USER CODE END 1 */
 /**
   * @}
   */
 /**
   * @}
   */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

src/dma.c

➞

Show inline comments

 /**
   ******************************************************************************
   * File Name          : dma.c
   * Description        : This file provides code for the configuration
   *                      of all the requested memory to memory DMA transfers.
   ******************************************************************************
+  *
   * COPYRIGHT(c) 2016 STMicroelectronics
+  *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
   *   1. Redistributions of source code must retain the above copyright notice,
   *      this list of conditions and the following disclaimer.
   *   2. Redistributions in binary form must reproduce the above copyright notice,
   *      this list of conditions and the following disclaimer in the documentation
   *      and/or other materials provided with the distribution.
   *   3. Neither the name of STMicroelectronics nor the names of its contributors
   *      may be used to endorse or promote products derived from this software
   *      without specific prior written permission.
+  *
   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
   ******************************************************************************
   */
 /* Includes ------------------------------------------------------------------*/
 #include "dma.h"
 /* USER CODE BEGIN 0 */
 /* USER CODE END 0 */
 /*----------------------------------------------------------------------------*/
 /* Configure DMA                                                              */
 /*----------------------------------------------------------------------------*/
 /* USER CODE BEGIN 1 */
 /* USER CODE END 1 */
 /**
   * Enable DMA controller clock
   */
 void MX_DMA_Init(void)
 void dma_init(void)
+{
   /* DMA controller clock enable */
   __DMA1_CLK_ENABLE();
   /* DMA interrupt init */
   HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 0, 0);
   HAL_NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);
+}
 /* USER CODE BEGIN 2 */
 /* USER CODE END 2 */
 /**
   * @}
   */
 /**
   * @}
   */
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

src/interrupts.c

➞

Show inline comments

@@ file renamed from src/stm32f0xx_it.c to src/interrupts.c @@
 //
 // Interrupts: all global ISRs
 //
 #include "stm32f0xx_hal.h"
 #include "stm32f0xx.h"
-#include "stm32f0xx_it.h"
+#include "interrupts.h"
 #include "gpio.h"
 extern DMA_HandleTypeDef hdma_usart1_rx;
 extern DMA_HandleTypeDef hdma_usart1_tx;
 extern UART_HandleTypeDef huart1;
 extern TIM_HandleTypeDef htim1;

src/main.c

➞

Show inline comments

 //
 // WSPRHAB: Minimal high-altitude balloon tracker with WSPR telemetry
 //
 #include "stm32f0xx_hal.h"
 #include "si5351.h"
 #include "jtencode.h"
 #include "adc.h"
 #include "dma.h"
 #include "i2c.h"
 #include "usart.h"
 #include "gpio.h"
 #include "gps.h"
 void sysclk_init(void);
 //#define WSPR_DEFAULT_FREQ 14097100UL
 #define WSPR_DEFAULT_FREQ 10140100UL
 #define WSPR_TONE_SPACING 146 // ~1.46 Hz
 #define WSPR_CTC 10672 // CTC value for WSPR
 char call[7] = "KD8TDF";
@@ @@ -58,14 +63,14 @@ void encode_wspr(void) @@
 int main(void)
+{
     HAL_Init();
     sysclk_init();
     gpio_init();
     MX_DMA_Init();
     MX_ADC_Init();
     dma_init();
     adc_init();
     i2c_init();
     HAL_GPIO_WritePin(OSC_NOTEN, 0);
     HAL_GPIO_WritePin(TCXO_EN, 1);
@@ @@ -189,10 +194,11 @@ void sysclk_init(void) @@
     HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit);
     HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
     HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
     __SYSCFG_CLK_ENABLE();
     // SysTick_IRQn interrupt configuration
     HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+}

src/stm32f0xx_hal_msp.c

➞

Show inline comments

deleted file

0 comments (0 inline, 0 general)