FeatherHAB/wsprhab Changeset - 4ffdc5eab0ff

Changeset - 4ffdc5eab0ff

Parent rev.

Child rev.

[Not reviewed]

default

0 1 0

Ethan Zonca - 10 years ago 2016-03-31 20:55:39
ez@ethanzonca.com

Add power saving measures

1 file changed with 62 insertions and 15 deletions:

src/main.c

0 comments (0 inline, 0 general)

src/main.c

➞

Show inline comments

@@ @@ -12,27 +12,45 @@ @@
 #include "gpio.h"
 #include "gps.h"
 void sysclk_init(void);
 #define WSPR_DEFAULT_FREQ 10140100UL
 #define WSPR_TONE_SPACING 146 // ~1.46 Hz
 #define WSPR_CTC 10672 // CTC value for WSPR
 // Private functions
 void sysclk_init(void);
 void enter_sleep(void);
 void enter_deepsleep(void);
 // Test stuff
 char call[7] = "KD8TDF";
 char loc[5] = "EN72";
 uint8_t dbm = 10;
 uint8_t tx_buffer[255];
+// Frequencies and channel info
 uint32_t freq = WSPR_DEFAULT_FREQ;
 uint8_t symbol_count = WSPR_SYMBOL_COUNT;
 uint16_t ctc = WSPR_CTC;
 uint16_t tone_spacing = WSPR_TONE_SPACING;
 volatile uint8_t proceed = 0;
 // Bring up TCXO and oscillator IC
 void encode_wspr(void)
+{
     HAL_GPIO_WritePin(OSC_NOTEN, 0);
     HAL_GPIO_WritePin(TCXO_EN, 1);
     HAL_Delay(100);
     // Bring up the chip
     si5351_init(i2c_get(), SI5351_CRYSTAL_LOAD_8PF, 0);
     si5351_set_correction(0);
     //si5351_set_pll(SI5351_PLL_FIXED, SI5351_PLLA);
     //si5351_set_ms_source(SI5351_CLK0, SI5351_PLLA);
     si5351_set_freq(WSPR_DEFAULT_FREQ * 100, 0, SI5351_CLK0);
     si5351_drive_strength(SI5351_CLK0, SI5351_DRIVE_8MA); // Set for max power if desired (8ma max)
     si5351_output_enable(SI5351_CLK0, 1);
     //si5351_pll_reset(SI5351_PLLA);
     // Encode message to transmit
     wspr_encode(call, loc, dbm, tx_buffer);
@@ @@ -53,8 +71,12 @@ void encode_wspr(void) @@
     // Disable transmitter
     si5351_output_enable(SI5351_CLK0, 0);
     HAL_GPIO_WritePin(OSC_NOTEN, 1);
     HAL_GPIO_WritePin(TCXO_EN, 0);
+}
 TIM_HandleTypeDef htim1;
 int main(void)
@@ @@ -67,8 +89,9 @@ int main(void) @@
     adc_init();
     i2c_init();
     HAL_GPIO_WritePin(OSC_NOTEN, 0);
     HAL_GPIO_WritePin(TCXO_EN, 1);
     // Disable ICs
     HAL_GPIO_WritePin(OSC_NOTEN, 1);
     HAL_GPIO_WritePin(TCXO_EN, 0);
     // Start timer for WSPR
@@ @@ -91,19 +114,21 @@ int main(void) @@
     jtencode_init();
     //gps_init();
     si5351_init(i2c_get(), SI5351_CRYSTAL_LOAD_8PF, 0);
     si5351_set_correction(0);
     //si5351_set_pll(SI5351_PLL_FIXED, SI5351_PLLA);
     //si5351_set_ms_source(SI5351_CLK0, SI5351_PLLA);
     si5351_set_freq(WSPR_DEFAULT_FREQ * 100, 0, SI5351_CLK0);
     si5351_drive_strength(SI5351_CLK0, SI5351_DRIVE_2MA); // Set for max power if desired (8ma max)
     si5351_output_enable(SI5351_CLK0, 1);
     //si5351_pll_reset(SI5351_PLLA);
     uint32_t led_timer = HAL_GetTick();
     uint32_t last_gps  = HAL_GetTick();
     uint32_t last_wspr  = 0xfffff; // start immediately.
     HAL_GPIO_TogglePin(LED_BLUE);
     HAL_Delay(100);
     HAL_GPIO_TogglePin(LED_BLUE);
     HAL_Delay(100);
     HAL_GPIO_TogglePin(LED_BLUE);
     HAL_Delay(100);
     HAL_GPIO_TogglePin(LED_BLUE);
     HAL_Delay(100);
     while (1)
+    {
         if(HAL_GetTick() - last_wspr > 120000)
@@ @@ -117,15 +142,37 @@ int main(void) @@
             HAL_GPIO_TogglePin(LED_BLUE);
             led_timer = HAL_GetTick();
+        }
-        if(HAL_GetTick() - last_gps > 100)
+        if(HAL_GetTick() - last_gps > 3000)
+        {
 //            gps_process();
             last_gps = HAL_GetTick();
+        }
         enter_sleep();
+    }
+}
 void enter_sleep(void)
+{
     //HAL_SuspendTick();
     HAL_TIM_Base_Stop_IT(&htim1);
     HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI);
     HAL_TIM_Base_Start_IT(&htim1);
     //HAL_ResumeTick();
+}
 void enter_deepsleep(void)
+{
     // Request to enter STOP mode with regulator in low power mode
     HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
     // After wake-up from STOP reconfigure the PLL
     sysclk_init();
+}
 // Initialize system clocks
 void sysclk_init(void)
+{

0 comments (0 inline, 0 general)