diff --git a/AirSense.brd b/AirSense.brd
--- a/AirSense.brd
+++ b/AirSense.brd
@@ -16,17 +16,17 @@
 <layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
-<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="yes"/>
-<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
-<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/>
 <layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
 <layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
 <layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
@@ -48,7 +48,7 @@
 <layer number="48" name="Document" color="7" fill="1" visible="no" active="yes"/>
 <layer number="49" name="Reference" color="7" fill="1" visible="no" active="yes"/>
 <layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
-<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="yes"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="52" name="bDocu" color="7" fill="1" visible="no" active="yes"/>
 <layer number="53" name="tGND_GNDA" color="7" fill="9" visible="no" active="no"/>
 <layer number="54" name="bGND_GNDA" color="1" fill="9" visible="no" active="no"/>
@@ -4132,7 +4132,7 @@ You are welcome to use this library for 
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
-<designrules name="Elecrow_2-layer_eagle_rule *">
+<designrules name="Elecrow_2-layer_eagle_rule">
 <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 Die Standard-Design-Rules sind so gewählt, dass sie für 
@@ -4211,7 +4211,7 @@ design rules under a new name.</descript
 <param name="dpMaxLengthDifference" value="10mm"/>
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkGrid" value="0"/>
-<param name="checkAngle" value="1"/>
+<param name="checkAngle" value="0"/>
 <param name="checkFont" value="1"/>
 <param name="checkRestrict" value="0"/>
 <param name="useDiameter" value="13"/>
diff --git a/AirSense.sch b/AirSense.sch
--- a/AirSense.sch
+++ b/AirSense.sch
@@ -3306,13 +3306,13 @@ Standard schematic elements and footprin
 <part name="J1" library="Protofusion" deviceset="JST-PA-4" device="PTH"/>
 <part name="J2" library="Protofusion" deviceset="JST-PA-4" device="PTH"/>
 <part name="U3" library="Protofusion" deviceset="TSL2591" device=""/>
-<part name="SUPPLY12" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="GND17" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="C12" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="1uF"/>
 <part name="SUPPLY13" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="R7" library="SparkFun-Resistors" deviceset="RESISTOR" device="0402" value="1.5k"/>
 <part name="R8" library="SparkFun-Resistors" deviceset="RESISTOR" device="0402" value="1.5k"/>
 <part name="SUPPLY14" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
+<part name="GND18" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
@@ -3325,6 +3325,8 @@ Standard schematic elements and footprin
 <wire x1="0" y1="132.08" x2="55.88" y2="132.08" width="0.4064" layer="94"/>
 <wire x1="55.88" y1="132.08" x2="147.32" y2="132.08" width="0.4064" layer="94"/>
 <wire x1="55.88" y1="185.42" x2="55.88" y2="132.08" width="0.4064" layer="94"/>
+<text x="172.72" y="7.62" size="5.08" layer="94">Matthew Reed</text>
+<text x="241.3" y="7.62" size="2.54" layer="94">1.1</text>
 </plain>
 <instances>
 <instance part="U1" gate="G$1" x="78.74" y="45.72"/>
@@ -3398,14 +3400,14 @@ Standard schematic elements and footprin
 <instance part="D4" gate="G$1" x="40.64" y="114.3" rot="R90"/>
 <instance part="J1" gate="J1" x="78.74" y="160.02" rot="R180"/>
 <instance part="J2" gate="J1" x="104.14" y="160.02" rot="R180"/>
-<instance part="U3" gate="U1" x="203.2" y="111.76"/>
-<instance part="SUPPLY12" gate="G$1" x="175.26" y="121.92"/>
-<instance part="GND17" gate="1" x="175.26" y="101.6"/>
-<instance part="C12" gate="G$1" x="175.26" y="114.3" rot="R180"/>
-<instance part="SUPPLY13" gate="G$1" x="228.6" y="119.38"/>
-<instance part="R7" gate="G$1" x="195.58" y="124.46"/>
-<instance part="R8" gate="G$1" x="210.82" y="124.46"/>
-<instance part="SUPPLY14" gate="G$1" x="203.2" y="127"/>
+<instance part="U3" gate="U1" x="198.12" y="111.76"/>
+<instance part="GND17" gate="1" x="182.88" y="101.6"/>
+<instance part="C12" gate="G$1" x="223.52" y="106.68" rot="R180"/>
+<instance part="SUPPLY13" gate="G$1" x="223.52" y="119.38"/>
+<instance part="R7" gate="G$1" x="190.5" y="124.46"/>
+<instance part="R8" gate="G$1" x="205.74" y="124.46"/>
+<instance part="SUPPLY14" gate="G$1" x="198.12" y="127"/>
+<instance part="GND18" gate="1" x="223.52" y="96.52"/>
 </instances>
 <busses>
 </busses>
@@ -3496,24 +3498,23 @@ Standard schematic elements and footprin
 <wire x1="124.46" y1="162.56" x2="127" y2="162.56" width="0.1524" layer="91"/>
 </segment>
 <segment>
-<pinref part="SUPPLY12" gate="G$1" pin="3.3V"/>
 <pinref part="C12" gate="G$1" pin="2"/>
-<wire x1="175.26" y1="121.92" x2="175.26" y2="116.84" width="0.1524" layer="91"/>
-</segment>
-<segment>
+<wire x1="223.52" y1="111.76" x2="223.52" y2="109.22" width="0.1524" layer="91"/>
+<junction x="223.52" y="111.76"/>
 <pinref part="U3" gate="U1" pin="VDD"/>
 <pinref part="SUPPLY13" gate="G$1" pin="3.3V"/>
-<wire x1="215.9" y1="111.76" x2="228.6" y2="111.76" width="0.1524" layer="91"/>
-<wire x1="228.6" y1="111.76" x2="228.6" y2="119.38" width="0.1524" layer="91"/>
+<wire x1="210.82" y1="111.76" x2="223.52" y2="111.76" width="0.1524" layer="91"/>
+<wire x1="223.52" y1="111.76" x2="223.52" y2="119.38" width="0.1524" layer="91"/>
+<junction x="223.52" y="111.76"/>
 </segment>
 <segment>
 <pinref part="R7" gate="G$1" pin="2"/>
-<wire x1="200.66" y1="124.46" x2="203.2" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="195.58" y1="124.46" x2="198.12" y2="124.46" width="0.1524" layer="91"/>
 <pinref part="SUPPLY14" gate="G$1" pin="3.3V"/>
-<wire x1="203.2" y1="127" x2="203.2" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="198.12" y1="127" x2="198.12" y2="124.46" width="0.1524" layer="91"/>
 <pinref part="R8" gate="G$1" pin="1"/>
-<wire x1="203.2" y1="124.46" x2="205.74" y2="124.46" width="0.1524" layer="91"/>
-<junction x="203.2" y="124.46"/>
+<wire x1="198.12" y1="124.46" x2="200.66" y2="124.46" width="0.1524" layer="91"/>
+<junction x="198.12" y="124.46"/>
 </segment>
 </net>
 <net name="GND" class="0">
@@ -3650,13 +3651,15 @@ Standard schematic elements and footprin
 <wire x1="20.32" y1="10.16" x2="20.32" y2="7.62" width="0.1524" layer="91"/>
 </segment>
 <segment>
-<pinref part="U3" gate="U1" pin="GND"/>
-<wire x1="190.5" y1="106.68" x2="175.26" y2="106.68" width="0.1524" layer="91"/>
+<pinref part="GND18" gate="1" pin="GND"/>
 <pinref part="C12" gate="G$1" pin="1"/>
-<wire x1="175.26" y1="106.68" x2="175.26" y2="109.22" width="0.1524" layer="91"/>
+<wire x1="223.52" y1="101.6" x2="223.52" y2="99.06" width="0.1524" layer="91"/>
+</segment>
+<segment>
+<pinref part="U3" gate="U1" pin="GND"/>
+<wire x1="185.42" y1="106.68" x2="182.88" y2="106.68" width="0.1524" layer="91"/>
 <pinref part="GND17" gate="1" pin="GND"/>
-<wire x1="175.26" y1="106.68" x2="175.26" y2="104.14" width="0.1524" layer="91"/>
-<junction x="175.26" y="106.68"/>
+<wire x1="182.88" y1="106.68" x2="182.88" y2="104.14" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="CAN_H" class="0">
@@ -3968,13 +3971,13 @@ Standard schematic elements and footprin
 <net name="SDA" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="SDA"/>
-<wire x1="215.9" y1="116.84" x2="218.44" y2="116.84" width="0.1524" layer="91"/>
-<label x="220.98" y="116.84" size="1.27" layer="95" xref="yes"/>
-<wire x1="218.44" y1="116.84" x2="220.98" y2="116.84" width="0.1524" layer="91"/>
-<wire x1="218.44" y1="124.46" x2="218.44" y2="116.84" width="0.1524" layer="91"/>
-<junction x="218.44" y="116.84"/>
+<wire x1="210.82" y1="116.84" x2="213.36" y2="116.84" width="0.1524" layer="91"/>
+<label x="215.9" y="116.84" size="1.27" layer="95" xref="yes"/>
+<wire x1="213.36" y1="116.84" x2="215.9" y2="116.84" width="0.1524" layer="91"/>
+<wire x1="213.36" y1="124.46" x2="213.36" y2="116.84" width="0.1524" layer="91"/>
+<junction x="213.36" y="116.84"/>
 <pinref part="R8" gate="G$1" pin="2"/>
-<wire x1="215.9" y1="124.46" x2="218.44" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="210.82" y1="124.46" x2="213.36" y2="124.46" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="I2C1_SDA/USART1_RX/PB7"/>
@@ -3985,13 +3988,13 @@ Standard schematic elements and footprin
 <net name="SCL" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="SCL"/>
-<wire x1="190.5" y1="116.84" x2="187.96" y2="116.84" width="0.1524" layer="91"/>
-<label x="185.42" y="116.84" size="1.27" layer="95" rot="R180" xref="yes"/>
+<wire x1="185.42" y1="116.84" x2="182.88" y2="116.84" width="0.1524" layer="91"/>
+<label x="180.34" y="116.84" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="R7" gate="G$1" pin="1"/>
-<wire x1="187.96" y1="116.84" x2="185.42" y2="116.84" width="0.1524" layer="91"/>
-<wire x1="190.5" y1="124.46" x2="187.96" y2="124.46" width="0.1524" layer="91"/>
-<wire x1="187.96" y1="124.46" x2="187.96" y2="116.84" width="0.1524" layer="91"/>
-<junction x="187.96" y="116.84"/>
+<wire x1="182.88" y1="116.84" x2="180.34" y2="116.84" width="0.1524" layer="91"/>
+<wire x1="185.42" y1="124.46" x2="182.88" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="182.88" y1="124.46" x2="182.88" y2="116.84" width="0.1524" layer="91"/>
+<junction x="182.88" y="116.84"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="I2C1_SCL/USART1_TX/PB6"/>
@@ -4002,8 +4005,8 @@ Standard schematic elements and footprin
 <net name="INT" class="0">
 <segment>
 <pinref part="U3" gate="U1" pin="INT"/>
-<wire x1="190.5" y1="111.76" x2="185.42" y2="111.76" width="0.1524" layer="91"/>
-<label x="185.42" y="111.76" size="1.27" layer="95" rot="R180" xref="yes"/>
+<wire x1="185.42" y1="111.76" x2="180.34" y2="111.76" width="0.1524" layer="91"/>
+<label x="180.34" y="111.76" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="PB1/ADC9"/>
diff --git a/CAM/AirSense.dri b/CAM/AirSense.dri
--- a/CAM/AirSense.dri
+++ b/CAM/AirSense.dri
@@ -1,8 +1,8 @@
 Generated by EAGLE CAM Processor 7.5.0
 
-Drill Station Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.dri
+Drill Station Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.dri
 
- Date              : 21 Jan 2017 23:25:30
+ Date              : 31 Jan 2017 20:02:52
  Drills            : generated
  Device            : Excellon drill station, coordinate format 2.4 inch
 
@@ -36,4 +36,4 @@ Total number of drills: 148
 
 Plotfiles:
 
- /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.TXT
+ /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.TXT
diff --git a/CAM/AirSense.gpi b/CAM/AirSense.gpi
--- a/CAM/AirSense.gpi
+++ b/CAM/AirSense.gpi
@@ -1,9 +1,9 @@
 Generated by EAGLE CAM Processor 7.5.0
 
-Photoplotter Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.gpi
+Photoplotter Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.gpi
 
- Date              : 21 Jan 2017 23:25:37
- Plotfile          : /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.GTL
+ Date              : 31 Jan 2017 20:02:59
+ Plotfile          : /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirSense.GTL
  Apertures         : generated: 
  Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch