Generated by EAGLE CAM Processor 7.5.0

Photoplotter Info File: /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.gpi

 Date              : 21 Jan 2017 23:25:37
 Plotfile          : /home/matthew/Projects/Hydroponics/airsense-hardware/CAM/AirTemp.GTL
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch

Parameter settings:

 Emulate Apertures : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.5
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      draw      0.0000inch              24
 D11      rectangle 0.0276inch x 0.0354inch    12
 D12      rectangle 0.0315inch x 0.0472inch     6
 D13      rectangle 0.0327inch x 0.0248inch     6
 D14      rectangle 0.0472inch x 0.1457inch     2
 D15      rectangle 0.0354inch x 0.0335inch    10
 D16      rectangle 0.0571inch x 0.0197inch    16
 D17      rectangle 0.0197inch x 0.0571inch    16
 D18      rectangle 0.0197inch x 0.0138inch     8
 D19      rectangle 0.0354inch x 0.0276inch     4
 D20      draw      0.0118inch               6
 D21      rectangle 0.0250inch x 0.0500inch     8
 D22      rectangle 0.0315inch x 0.0248inch     6
 D23      rectangle 0.0320inch x 0.0350inch     4
 D24      rectangle 0.0472inch x 0.0551inch     4
 D25      rectangle 0.0354inch x 0.0315inch     3
 D26      rectangle 0.0335inch x 0.0354inch     6
 D27      draw      0.0476inch               8
 D28      draw      0.0320inch              36
 D29      draw      0.0160inch            1741
 D30      draw      0.0240inch              40
 D31      draw      0.0100inch             106
 D32      round     0.0250inch             132
 D33      draw      0.0500inch               3
 D34      draw      0.1500inch               1