diff --git a/CAM/hydrohub.gpi b/CAM/hydrohub.gpi
new file mode 100644
--- /dev/null
+++ b/CAM/hydrohub.gpi
@@ -0,0 +1,45 @@
+Generated by EAGLE CAM Processor 7.5.0
+
+Photoplotter Info File: /home/matthew/Projects/Hydroponics/hydrohub-hardware/CAM/hydrohub.gpi
+
+ Date              : 22 Aug 2016 21:32:53
+ Plotfile          : /home/matthew/Projects/Hydroponics/hydrohub-hardware/CAM/hydrohub.GTL
+ Apertures         : generated: 
+ Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
+
+Parameter settings:
+
+ Emulate Apertures : no
+ Tolerance Draw  + :  0.00 %
+ Tolerance Draw  - :  0.00 %
+ Tolerance Flash + :  0.00 %
+ Tolerance Flash - :  0.00 %
+ Rotate            : no
+ Mirror            : no
+ Optimize          : yes
+ Auto fit          : yes
+ OffsetX           : 0inch
+ OffsetY           : 0inch
+
+Plotfile Info:
+
+ Coordinate Format : 2.5
+ Coordinate Units  : Inch
+ Data Mode         : Absolute
+ Zero Suppression  : None
+ End Of Block      : *
+
+Apertures used:
+
+ Code     Shape     Size                  used
+
+ D10      draw      0.0000inch              28
+ D11      draw      0.0118inch               2
+ D12      rectangle 0.0354inch x 0.0374inch     2
+ D13      round     0.1700inch               3
+ D14      draw      0.0476inch              32
+ D15      round     0.0740inch               3
+ D16      rectangle 0.0394inch x 0.0433inch     2
+ D17      draw      0.0160inch            2026
+ D18      round     0.0270inch               2
+