Files
@ a6cb9f350919
Branch filter:
Location: HydroBot/protomodule-firmware/Drivers/STM32F0xx_HAL_Driver/Inc/stm32f0xx_hal_smartcard.h
a6cb9f350919
54.2 KiB
text/plain
Updated to hydrobot baseline functionality
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 | /**
******************************************************************************
* @file stm32f0xx_hal_smartcard.h
* @author MCD Application Team
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_SMARTCARD_H
#define __STM32F0xx_HAL_SMARTCARD_H
#ifdef __cplusplus
extern "C" {
#endif
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup SMARTCARD
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
* @{
*/
/**
* @brief SMARTCARD Init Structure definition
*/
typedef struct
{
uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
The baud rate register is computed using the following formula:
Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
uint32_t StopBits; /*!< Specifies the number of stop bits.
This parameter can be a value of @ref SMARTCARD_Stop_Bits. */
uint16_t Parity; /*!< Specifies the parity mode.
This parameter can be a value of @ref SMARTCARD_Parity
@note The parity is enabled by default (PCE is forced to 1).
Since the WordLength is forced to 8 bits + parity, M is
forced to 1 and the parity bit is the 9th bit. */
uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
This parameter can be a value of @ref SMARTCARD_Mode */
uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
This parameter can be a value of @ref SMARTCARD_Clock_Phase */
uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
data bit (MSB) has to be output on the SCLK pin in synchronous mode.
This parameter can be a value of @ref SMARTCARD_Last_Bit */
uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
Selecting the single sample method increases the receiver tolerance to clock
deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler. */
uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time applied after stop bits. */
uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
in case of parity error.
This parameter can be a value of @ref SMARTCARD_NACK_Enable */
uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
it is used to implement the Character Wait Time (CWT) and
Block Wait Time (BWT). It is coded over 24 bits. */
uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
This parameter can be any value from 0x0 to 0xFF */
uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
receive and transmit mode). When set to 0, retransmission is
disabled. Otherwise, its maximum value is 7 (before signalling
an error) */
}SMARTCARD_InitTypeDef;
/**
* @brief SMARTCARD advanced features initalization structure definition
*/
typedef struct
{
uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
advanced features may be initialized at the same time. This parameter
can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
This parameter can be a value of @ref SMARTCARD_Tx_Inv */
uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
This parameter can be a value of @ref SMARTCARD_Rx_Inv */
uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
vs negative/inverted logic).
This parameter can be a value of @ref SMARTCARD_Data_Inv */
uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
This parameter can be a value of @ref SMARTCARD_MSB_First */
}SMARTCARD_AdvFeatureInitTypeDef;
/**
* @brief HAL SMARTCARD State structures definition
* @note HAL SMARTCARD State value is a combination of 2 different substates: gState and RxState.
* - gState contains SMARTCARD state information related to global Handle management
* and also information related to Tx operations.
* gState value coding follow below described bitmap :
* b7-b6 Error information
* 00 : No Error
* 01 : (Not Used)
* 10 : Timeout
* 11 : Error
* b5 IP initilisation status
* 0 : Reset (IP not initialized)
* 1 : Init done (IP not initialized. HAL SMARTCARD Init function already called)
* b4-b3 (not used)
* xx : Should be set to 00
* b2 Intrinsic process state
* 0 : Ready
* 1 : Busy (IP busy with some configuration or internal operations)
* b1 (not used)
* x : Should be set to 0
* b0 Tx state
* 0 : Ready (no Tx operation ongoing)
* 1 : Busy (Tx operation ongoing)
* - RxState contains information related to Rx operations.
* RxState value coding follow below described bitmap :
* b7-b6 (not used)
* xx : Should be set to 00
* b5 IP initilisation status
* 0 : Reset (IP not initialized)
* 1 : Init done (IP not initialized)
* b4-b2 (not used)
* xxx : Should be set to 000
* b1 Rx state
* 0 : Ready (no Rx operation ongoing)
* 1 : Busy (Rx operation ongoing)
* b0 (not used)
* x : Should be set to 0.
*/
typedef enum
{
HAL_SMARTCARD_STATE_RESET = 0x00U, /*!< Peripheral is not initialized
Value is allowed for gState and RxState */
HAL_SMARTCARD_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use
Value is allowed for gState and RxState */
HAL_SMARTCARD_STATE_BUSY = 0x24U, /*!< an internal process is ongoing
Value is allowed for gState only */
HAL_SMARTCARD_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing
Value is allowed for gState only */
HAL_SMARTCARD_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing
Value is allowed for RxState only */
HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing
Not to be used for neither gState nor RxState.
Value is result of combination (Or) between gState and RxState values */
HAL_SMARTCARD_STATE_TIMEOUT = 0xA0U, /*!< Timeout state
Value is allowed for gState only */
HAL_SMARTCARD_STATE_ERROR = 0xE0U /*!< Error
Value is allowed for gState only */
}HAL_SMARTCARD_StateTypeDef;
/**
* @brief SMARTCARD clock sources
*/
typedef enum
{
SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */
SMARTCARD_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */
SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */
SMARTCARD_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */
SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10U /*!< undefined clock source */
}SMARTCARD_ClockSourceTypeDef;
/**
* @brief SMARTCARD handle Structure definition
*/
typedef struct
{
USART_TypeDef *Instance; /*!< USART registers base address */
SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
__IO uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
__IO uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_SMARTCARD_StateTypeDef gState; /*!< SmartCard state information related to global Handle management
and also related to Tx operations.
This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
__IO HAL_SMARTCARD_StateTypeDef RxState; /*!< SmartCard state information related to Rx operations.
This parameter can be a value of @ref HAL_SMARTCARD_StateTypeDef */
__IO uint32_t ErrorCode; /*!< SmartCard Error code
This parameter can be a value of @ref SMARTCARD_Error */
}SMARTCARD_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants
* @{
*/
/** @defgroup SMARTCARD_Error SMARTCARD Error
* @{
*/
#define HAL_SMARTCARD_ERROR_NONE (0x00000000U) /*!< No error */
#define HAL_SMARTCARD_ERROR_PE (0x00000001U) /*!< Parity error */
#define HAL_SMARTCARD_ERROR_NE (0x00000002U) /*!< Noise error */
#define HAL_SMARTCARD_ERROR_FE (0x00000004U) /*!< frame error */
#define HAL_SMARTCARD_ERROR_ORE (0x00000008U) /*!< Overrun error */
#define HAL_SMARTCARD_ERROR_DMA (0x00000010U) /*!< DMA transfer error */
#define HAL_SMARTCARD_ERROR_RTO (0x00000020U) /*!< Receiver TimeOut error */
/**
* @}
*/
/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
* @{
*/
#if defined (USART_CR1_M0)
#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< SMARTCARD frame length */
#else
#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) /*!< SMARTCARD frame length */
#endif
/**
* @}
*/
/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
* @{
*/
#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) /*!< SMARTCARD frame with 0.5 stop bit */
#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) /*!< SMARTCARD frame with 1.5 stop bits */
/**
* @}
*/
/** @defgroup SMARTCARD_Parity SMARTCARD Parity
* @{
*/
#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) /*!< SMARTCARD frame even parity */
#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) /*!< SMARTCARD frame odd parity */
/**
* @}
*/
/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
* @{
*/
#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) /*!< SMARTCARD RX mode */
#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) /*!< SMARTCARD TX mode */
#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) /*!< SMARTCARD RX and TX mode */
/**
* @}
*/
/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
* @{
*/
#define SMARTCARD_POLARITY_LOW (0x00000000U) /*!< SMARTCARD frame low polarity */
#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) /*!< SMARTCARD frame high polarity */
/**
* @}
*/
/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
* @{
*/
#define SMARTCARD_PHASE_1EDGE (0x00000000U) /*!< SMARTCARD frame phase on first clock transition */
#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) /*!< SMARTCARD frame phase on second clock transition */
/**
* @}
*/
/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
* @{
*/
#define SMARTCARD_LASTBIT_DISABLE (0x00000000U) /*!< SMARTCARD frame last data bit clock pulse not output to SCLK pin */
#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) /*!< SMARTCARD frame last data bit clock pulse output to SCLK pin */
/**
* @}
*/
/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
* @{
*/
#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE (0x00000000U) /*!< SMARTCARD frame one-bit sample disabled */
#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) /*!< SMARTCARD frame one-bit sample enabled */
/**
* @}
*/
/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
* @{
*/
#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) /*!< SMARTCARD NACK transmission disabled */
#define SMARTCARD_NACK_DISABLE (0x00000000U) /*!< SMARTCARD NACK transmission enabled */
/**
* @}
*/
/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
* @{
*/
#define SMARTCARD_TIMEOUT_DISABLE (0x00000000U) /*!< SMARTCARD receiver timeout disabled */
#define SMARTCARD_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) /*!< SMARTCARD receiver timeout enabled */
/**
* @}
*/
/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
* @{
*/
#define SMARTCARD_ADVFEATURE_NO_INIT (0x00000000U) /*!< No advanced feature initialization */
#define SMARTCARD_ADVFEATURE_TXINVERT_INIT (0x00000001U) /*!< TX pin active level inversion */
#define SMARTCARD_ADVFEATURE_RXINVERT_INIT (0x00000002U) /*!< RX pin active level inversion */
#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT (0x00000004U) /*!< Binary data inversion */
#define SMARTCARD_ADVFEATURE_SWAP_INIT (0x00000008U) /*!< TX/RX pins swap */
#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT (0x00000010U) /*!< RX overrun disable */
#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT (0x00000020U) /*!< DMA disable on Reception Error */
#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT (0x00000080U) /*!< Most significant bit sent/received first */
/**
* @}
*/
/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
* @{
*/
#define SMARTCARD_ADVFEATURE_TXINV_DISABLE (0x00000000U) /*!< TX pin active level inversion disable */
#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) /*!< TX pin active level inversion enable */
/**
* @}
*/
/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
* @{
*/
#define SMARTCARD_ADVFEATURE_RXINV_DISABLE (0x00000000U) /*!< RX pin active level inversion disable */
#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) /*!< RX pin active level inversion enable */
/**
* @}
*/
/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
* @{
*/
#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE (0x00000000U) /*!< Binary data inversion disable */
#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) /*!< Binary data inversion enable */
/**
* @}
*/
/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
* @{
*/
#define SMARTCARD_ADVFEATURE_SWAP_DISABLE (0x00000000U) /*!< TX/RX pins swap disable */
#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) /*!< TX/RX pins swap enable */
/**
* @}
*/
/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
* @{
*/
#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE (0x00000000U) /*!< RX overrun enable */
#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) /*!< RX overrun disable */
/**
* @}
*/
/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
* @{
*/
#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR (0x00000000U) /*!< DMA enable on Reception Error */
#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) /*!< DMA disable on Reception Error */
/**
* @}
*/
/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
* @{
*/
#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE (0x00000000U) /*!< Most significant bit sent/received first disable */
#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) /*!< Most significant bit sent/received first enable */
/**
* @}
*/
/** @defgroup SMARTCARD_Flags SMARTCARD Flags
* Elements values convention: 0xXXXX
* - 0xXXXX : Flag mask in the ISR register
* @{
*/
#define SMARTCARD_FLAG_REACK USART_ISR_REACK /*!< SMARTCARD receive enable acknowledge flag */
#define SMARTCARD_FLAG_TEACK USART_ISR_TEACK /*!< SMARTCARD transmit enable acknowledge flag */
#define SMARTCARD_FLAG_BUSY USART_ISR_BUSY /*!< SMARTCARD busy flag */
#define SMARTCARD_FLAG_EOBF USART_ISR_EOBF /*!< SMARTCARD end of block flag */
#define SMARTCARD_FLAG_RTOF USART_ISR_RTOF /*!< SMARTCARD receiver timeout flag */
#define SMARTCARD_FLAG_TXE USART_ISR_TXE /*!< SMARTCARD transmit data register empty */
#define SMARTCARD_FLAG_TC USART_ISR_TC /*!< SMARTCARD transmission complete */
#define SMARTCARD_FLAG_RXNE USART_ISR_RXNE /*!< SMARTCARD read data register not empty */
#define SMARTCARD_FLAG_IDLE USART_ISR_IDLE /*!< SMARTCARD idle line detection */
#define SMARTCARD_FLAG_ORE USART_ISR_ORE /*!< SMARTCARD overrun error */
#define SMARTCARD_FLAG_NE USART_ISR_NE /*!< SMARTCARD noise error */
#define SMARTCARD_FLAG_FE USART_ISR_FE /*!< SMARTCARD frame error */
#define SMARTCARD_FLAG_PE USART_ISR_PE /*!< SMARTCARD parity error */
/**
* @}
*/
/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
* Elements values convention: 0000ZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
* - 01: CR1 register
* - 10: CR2 register
* - 11: CR3 register
* - ZZZZ : Flag position in the ISR register(4bits)
* @{
*/
#define SMARTCARD_IT_PE ((uint16_t)0x0028U) /*!< SMARTCARD parity error interruption */
#define SMARTCARD_IT_TXE ((uint16_t)0x0727U) /*!< SMARTCARD transmit data register empty interruption */
#define SMARTCARD_IT_TC ((uint16_t)0x0626U) /*!< SMARTCARD transmission complete interruption */
#define SMARTCARD_IT_RXNE ((uint16_t)0x0525U) /*!< SMARTCARD read data register not empty interruption */
#define SMARTCARD_IT_IDLE ((uint16_t)0x0424U) /*!< SMARTCARD idle line detection interruption */
#define SMARTCARD_IT_ERR ((uint16_t)0x0060U) /*!< SMARTCARD error interruption */
#define SMARTCARD_IT_ORE ((uint16_t)0x0300U) /*!< SMARTCARD overrun error interruption */
#define SMARTCARD_IT_NE ((uint16_t)0x0200U) /*!< SMARTCARD noise error interruption */
#define SMARTCARD_IT_FE ((uint16_t)0x0100U) /*!< SMARTCARD frame error interruption */
#define SMARTCARD_IT_EOB ((uint16_t)0x0C3BU) /*!< SMARTCARD end of block interruption */
#define SMARTCARD_IT_RTO ((uint16_t)0x0B3AU) /*!< SMARTCARD receiver timeout interruption */
/**
* @}
*/
/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
* @{
*/
#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< SMARTCARD parity error clear flag */
#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< SMARTCARD framing error clear flag */
#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< SMARTCARD noise detected clear flag */
#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< SMARTCARD overrun error clear flag */
#define SMARTCARD_CLEAR_IDLEF USART_ICR_IDLECF /*!< SMARTCARD idle line detected clear flag */
#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< SMARTCARD transmission complete clear flag */
#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< SMARTCARD receiver time out clear flag */
#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< SMARTCARD end of block clear flag */
/**
* @}
*/
/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
* @{
*/
#define SMARTCARD_CR3_SCARCNT_LSB_POS ( 17U) /*!< SMARTCARD auto retry counter LSB position in CR3 register */
/**
* @}
*/
/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
* @{
*/
#define SMARTCARD_GTPR_GT_LSB_POS ( 8U) /*!< SMARTCARD guard time value LSB position in GTPR register */
/**
* @}
*/
/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
* @{
*/
#define SMARTCARD_RTOR_BLEN_LSB_POS ( 24U) /*!< SMARTCARD block length LSB position in RTOR register */
/**
* @}
*/
/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flags mask
* @{
*/
#define SMARTCARD_IT_MASK ((uint16_t)0x001FU) /*!< SMARTCARD interruptions flags mask */
/**
* @}
*/
/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
* @{
*/
#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive data flush request */
#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush request */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
* @{
*/
/** @brief Reset SMARTCARD handle states.
* @param __HANDLE__ SMARTCARD handle.
* @retval None
*/
#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) do{ \
(__HANDLE__)->gState = HAL_SMARTCARD_STATE_RESET; \
(__HANDLE__)->RxState = HAL_SMARTCARD_STATE_RESET; \
} while(0U)
/** @brief Flush the Smartcard Data registers.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) \
do{ \
SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_RXDATA_FLUSH_REQUEST); \
SET_BIT((__HANDLE__)->Instance->RQR, SMARTCARD_TXDATA_FLUSH_REQUEST); \
} while(0U)
/** @brief Clear the specified SMARTCARD pending flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be any combination of the following values:
* @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
* @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
* @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
* @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
* @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detected clear flag
* @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
* @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
* @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
/** @brief Clear the SMARTCARD PE pending flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_PEF)
/** @brief Clear the SMARTCARD FE pending flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_FEF)
/** @brief Clear the SMARTCARD NE pending flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_NEF)
/** @brief Clear the SMARTCARD ORE pending flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_OREF)
/** @brief Clear the SMARTCARD IDLE pending flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_FLAG((__HANDLE__), SMARTCARD_CLEAR_IDLEF)
/** @brief Check whether the specified Smartcard flag is set or not.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @param __FLAG__ specifies the flag to check.
* This parameter can be one of the following values:
* @arg @ref SMARTCARD_FLAG_REACK Receive enable acknowledge flag
* @arg @ref SMARTCARD_FLAG_TEACK Transmit enable acknowledge flag
* @arg @ref SMARTCARD_FLAG_BUSY Busy flag
* @arg @ref SMARTCARD_FLAG_EOBF End of block flag
* @arg @ref SMARTCARD_FLAG_RTOF Receiver timeout flag
* @arg @ref SMARTCARD_FLAG_TXE Transmit data register empty flag
* @arg @ref SMARTCARD_FLAG_TC Transmission complete flag
* @arg @ref SMARTCARD_FLAG_RXNE Receive data register not empty flag
* @arg @ref SMARTCARD_FLAG_IDLE Idle line detection flag
* @arg @ref SMARTCARD_FLAG_ORE Overrun error flag
* @arg @ref SMARTCARD_FLAG_NE Noise error flag
* @arg @ref SMARTCARD_FLAG_FE Framing error flag
* @arg @ref SMARTCARD_FLAG_PE Parity error flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
/** @brief Enable the specified SmartCard interrupt.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @param __INTERRUPT__ specifies the SMARTCARD interrupt to enable.
* This parameter can be one of the following values:
* @arg @ref SMARTCARD_IT_EOB End of block interrupt
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
* @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFFU) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
((((__INTERRUPT__) & 0xFFU) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
/** @brief Disable the specified SmartCard interrupt.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @param __INTERRUPT__ specifies the SMARTCARD interrupt to disable.
* This parameter can be one of the following values:
* @arg @ref SMARTCARD_IT_EOB End of block interrupt
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
* @arg @ref SMARTCARD_IT_ERR Error interrupt(frame error, noise error, overrun error)
* @retval None
*/
#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((__INTERRUPT__) & 0xFFU) >> 5U) == 1U)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
((((__INTERRUPT__) & 0xFFU) >> 5U) == 2U)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
/** @brief Check whether the specified SmartCard interrupt has occurred or not.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @param __IT__ specifies the SMARTCARD interrupt to check.
* This parameter can be one of the following values:
* @arg @ref SMARTCARD_IT_EOB End of block interrupt
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
* @arg @ref SMARTCARD_IT_ORE Overrun error interrupt
* @arg @ref SMARTCARD_IT_NE Noise error interrupt
* @arg @ref SMARTCARD_IT_FE Framing error interrupt
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & (1U << ((__IT__)>> 0x08U)))
/** @brief Check whether the specified SmartCard interrupt source is enabled or not.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @param __IT__ specifies the SMARTCARD interrupt source to check.
* This parameter can be one of the following values:
* @arg @ref SMARTCARD_IT_EOB End of block interrupt
* @arg @ref SMARTCARD_IT_RTO Receive timeout interrupt
* @arg @ref SMARTCARD_IT_TXE Transmit data register empty interrupt
* @arg @ref SMARTCARD_IT_TC Transmission complete interrupt
* @arg @ref SMARTCARD_IT_RXNE Receive data register not empty interrupt
* @arg @ref SMARTCARD_IT_IDLE Idle line detection interrupt
* @arg @ref SMARTCARD_IT_ERR Framing, overrun or noise error interrupt
* @arg @ref SMARTCARD_IT_PE Parity error interrupt
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((__IT__) & 0xFFU) >> 5U) == 1U)? (__HANDLE__)->Instance->CR1 : \
(((((__IT__) & 0xFFU) >> 5U) == 2U)? (__HANDLE__)->Instance->CR2 : \
(__HANDLE__)->Instance->CR3)) & (1U << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
/** @brief Clear the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set
* to clear the corresponding interrupt.
* This parameter can be one of the following values:
* @arg @ref SMARTCARD_CLEAR_PEF Parity error clear flag
* @arg @ref SMARTCARD_CLEAR_FEF Framing error clear flag
* @arg @ref SMARTCARD_CLEAR_NEF Noise detected clear flag
* @arg @ref SMARTCARD_CLEAR_OREF OverRun error clear flag
* @arg @ref SMARTCARD_CLEAR_IDLEF Idle line detection clear flag
* @arg @ref SMARTCARD_CLEAR_TCF Transmission complete clear flag
* @arg @ref SMARTCARD_CLEAR_RTOF Receiver timeout clear flag
* @arg @ref SMARTCARD_CLEAR_EOBF End of block clear flag
* @retval None
*/
#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
/** @brief Set a specific SMARTCARD request flag.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @param __REQ__ specifies the request flag to set
* This parameter can be one of the following values:
* @arg @ref SMARTCARD_RXDATA_FLUSH_REQUEST Receive data flush Request
* @arg @ref SMARTCARD_TXDATA_FLUSH_REQUEST Transmit data flush Request
*
* @retval None
*/
#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
/** @brief Enable the SMARTCARD one bit sample method.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
/** @brief Disable the SMARTCARD one bit sample method.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_ONEBIT))
/** @brief Enable the USART associated to the SMARTCARD Handle.
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
/** @brief Disable the USART associated to the SMARTCARD Handle
* @param __HANDLE__ specifies the SMARTCARD Handle.
* @retval None
*/
#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
/**
* @}
*/
/* Private macros -------------------------------------------------------------*/
/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
* @{
*/
/** @brief Check the Baud rate range.
* @note The maximum Baud Rate is derived from the maximum clock on F0 (48 MHz)
* divided by the oversampling used on the SMARTCARD (i.e. 16).
* @param __BAUDRATE__ Baud rate set by the configuration function.
* @retval Test result (TRUE or FALSE)
*/
#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 3000001U)
/** @brief Check the block length range.
* @note The maximum SMARTCARD block length is 0xFF.
* @param __LENGTH__ block length.
* @retval Test result (TRUE or FALSE)
*/
#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFFU)
/** @brief Check the receiver timeout value.
* @note The maximum SMARTCARD receiver timeout value is 0xFFFFFF.
* @param __TIMEOUTVALUE__ receiver timeout value.
* @retval Test result (TRUE or FALSE)
*/
#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFFU)
/** @brief Check the SMARTCARD autoretry counter value.
* @note The maximum number of retransmissions is 0x7.
* @param __COUNT__ number of retransmissions.
* @retval Test result (TRUE or FALSE)
*/
#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7U)
/**
* @brief Ensure that SMARTCARD frame length is valid.
* @param __LENGTH__ SMARTCARD frame length.
* @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
*/
#define IS_SMARTCARD_WORD_LENGTH(__LENGTH__) ((__LENGTH__) == SMARTCARD_WORDLENGTH_9B)
/**
* @brief Ensure that SMARTCARD frame number of stop bits is valid.
* @param __STOPBITS__ SMARTCARD frame number of stop bits.
* @retval SET (__STOPBITS__ is valid) or RESET (__STOPBITS__ is invalid)
*/
#define IS_SMARTCARD_STOPBITS(__STOPBITS__) (((__STOPBITS__) == SMARTCARD_STOPBITS_0_5) ||\
((__STOPBITS__) == SMARTCARD_STOPBITS_1_5))
/**
* @brief Ensure that SMARTCARD frame parity is valid.
* @param __PARITY__ SMARTCARD frame parity.
* @retval SET (__PARITY__ is valid) or RESET (__PARITY__ is invalid)
*/
#define IS_SMARTCARD_PARITY(__PARITY__) (((__PARITY__) == SMARTCARD_PARITY_EVEN) || \
((__PARITY__) == SMARTCARD_PARITY_ODD))
/**
* @brief Ensure that SMARTCARD communication mode is valid.
* @param __MODE__ SMARTCARD communication mode.
* @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
*/
#define IS_SMARTCARD_MODE(__MODE__) ((((__MODE__) & (uint16_t)0xFFF3U) == 0x00U) && ((__MODE__) != (uint16_t)0x00U))
/**
* @brief Ensure that SMARTCARD frame polarity is valid.
* @param __CPOL__ SMARTCARD frame polarity.
* @retval SET (__CPOL__ is valid) or RESET (__CPOL__ is invalid)
*/
#define IS_SMARTCARD_POLARITY(__CPOL__) (((__CPOL__) == SMARTCARD_POLARITY_LOW) || ((__CPOL__) == SMARTCARD_POLARITY_HIGH))
/**
* @brief Ensure that SMARTCARD frame phase is valid.
* @param __CPHA__ SMARTCARD frame phase.
* @retval SET (__CPHA__ is valid) or RESET (__CPHA__ is invalid)
*/
#define IS_SMARTCARD_PHASE(__CPHA__) (((__CPHA__) == SMARTCARD_PHASE_1EDGE) || ((__CPHA__) == SMARTCARD_PHASE_2EDGE))
/**
* @brief Ensure that SMARTCARD frame last bit clock pulse setting is valid.
* @param __LASTBIT__ SMARTCARD frame last bit clock pulse setting.
* @retval SET (__LASTBIT__ is valid) or RESET (__LASTBIT__ is invalid)
*/
#define IS_SMARTCARD_LASTBIT(__LASTBIT__) (((__LASTBIT__) == SMARTCARD_LASTBIT_DISABLE) || \
((__LASTBIT__) == SMARTCARD_LASTBIT_ENABLE))
/**
* @brief Ensure that SMARTCARD frame sampling is valid.
* @param __ONEBIT__ SMARTCARD frame sampling.
* @retval SET (__ONEBIT__ is valid) or RESET (__ONEBIT__ is invalid)
*/
#define IS_SMARTCARD_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \
((__ONEBIT__) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE))
/**
* @brief Ensure that SMARTCARD NACK transmission setting is valid.
* @param __NACK__ SMARTCARD NACK transmission setting.
* @retval SET (__NACK__ is valid) or RESET (__NACK__ is invalid)
*/
#define IS_SMARTCARD_NACK(__NACK__) (((__NACK__) == SMARTCARD_NACK_ENABLE) || \
((__NACK__) == SMARTCARD_NACK_DISABLE))
/**
* @brief Ensure that SMARTCARD receiver timeout setting is valid.
* @param __TIMEOUT__ SMARTCARD receiver timeout setting.
* @retval SET (__TIMEOUT__ is valid) or RESET (__TIMEOUT__ is invalid)
*/
#define IS_SMARTCARD_TIMEOUT(__TIMEOUT__) (((__TIMEOUT__) == SMARTCARD_TIMEOUT_DISABLE) || \
((__TIMEOUT__) == SMARTCARD_TIMEOUT_ENABLE))
/**
* @brief Ensure that SMARTCARD advanced features initialization is valid.
* @param __INIT__ SMARTCARD advanced features initialization.
* @retval SET (__INIT__ is valid) or RESET (__INIT__ is invalid)
*/
#define IS_SMARTCARD_ADVFEATURE_INIT(__INIT__) ((__INIT__) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
SMARTCARD_ADVFEATURE_SWAP_INIT | \
SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
/**
* @brief Ensure that SMARTCARD frame TX inversion setting is valid.
* @param __TXINV__ SMARTCARD frame TX inversion setting.
* @retval SET (__TXINV__ is valid) or RESET (__TXINV__ is invalid)
*/
#define IS_SMARTCARD_ADVFEATURE_TXINV(__TXINV__) (((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
((__TXINV__) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
/**
* @brief Ensure that SMARTCARD frame RX inversion setting is valid.
* @param __RXINV__ SMARTCARD frame RX inversion setting.
* @retval SET (__RXINV__ is valid) or RESET (__RXINV__ is invalid)
*/
#define IS_SMARTCARD_ADVFEATURE_RXINV(__RXINV__) (((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
((__RXINV__) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
/**
* @brief Ensure that SMARTCARD frame data inversion setting is valid.
* @param __DATAINV__ SMARTCARD frame data inversion setting.
* @retval SET (__DATAINV__ is valid) or RESET (__DATAINV__ is invalid)
*/
#define IS_SMARTCARD_ADVFEATURE_DATAINV(__DATAINV__) (((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
((__DATAINV__) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
/**
* @brief Ensure that SMARTCARD frame RX/TX pins swap setting is valid.
* @param __SWAP__ SMARTCARD frame RX/TX pins swap setting.
* @retval SET (__SWAP__ is valid) or RESET (__SWAP__ is invalid)
*/
#define IS_SMARTCARD_ADVFEATURE_SWAP(__SWAP__) (((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
((__SWAP__) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
/**
* @brief Ensure that SMARTCARD frame overrun setting is valid.
* @param __OVERRUN__ SMARTCARD frame overrun setting.
* @retval SET (__OVERRUN__ is valid) or RESET (__OVERRUN__ is invalid)
*/
#define IS_SMARTCARD_OVERRUN(__OVERRUN__) (((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
((__OVERRUN__) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
/**
* @brief Ensure that SMARTCARD DMA enabling or disabling on error setting is valid.
* @param __DMA__ SMARTCARD DMA enabling or disabling on error setting.
* @retval SET (__DMA__ is valid) or RESET (__DMA__ is invalid)
*/
#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(__DMA__) (((__DMA__) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
((__DMA__) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
/**
* @brief Ensure that SMARTCARD frame MSB first setting is valid.
* @param __MSBFIRST__ SMARTCARD frame MSB first setting.
* @retval SET (__MSBFIRST__ is valid) or RESET (__MSBFIRST__ is invalid)
*/
#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(__MSBFIRST__) (((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
((__MSBFIRST__) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
/**
* @brief Ensure that SMARTCARD request parameter is valid.
* @param __PARAM__ SMARTCARD request parameter.
* @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
*/
#define IS_SMARTCARD_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
((__PARAM__) == SMARTCARD_TXDATA_FLUSH_REQUEST))
/**
* @}
*/
/* Include SMARTCARD HAL Extended module */
#include "stm32f0xx_hal_smartcard_ex.h"
/* Exported functions --------------------------------------------------------*/
/** @addtogroup SMARTCARD_Exported_Functions
* @{
*/
/* Initialization and de-initialization functions ****************************/
/** @addtogroup SMARTCARD_Exported_Functions_Group1
* @{
*/
HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
/**
* @}
*/
/* IO operation functions *****************************************************/
/** @addtogroup SMARTCARD_Exported_Functions_Group2
* @{
*/
HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
/* Transfer Abort functions */
HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard);
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard);
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard);
HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard);
HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_AbortCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_AbortTransmitCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
void HAL_SMARTCARD_AbortReceiveCpltCallback (SMARTCARD_HandleTypeDef *hsmartcard);
/**
* @}
*/
/* Peripheral State and Error functions ***************************************/
/** @addtogroup SMARTCARD_Exported_Functions_Group3
* @{
*/
HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_SMARTCARD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|