diff --git a/RelayDrive.brd b/RelayDrive.brd
--- a/RelayDrive.brd
+++ b/RelayDrive.brd
@@ -6,7 +6,7 @@
 <setting alwaysvectorfont="yes"/>
 <setting verticaltext="up"/>
 </settings>
-<grid distance="6.25" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="3.125" altunitdist="mil" altunit="mil"/>
+<grid distance="12.5" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="3.125" altunitdist="mil" altunit="mil"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
@@ -173,55 +173,44 @@
 </layers>
 <board>
 <plain>
-<wire x1="0" y1="44.45" x2="0" y2="0" width="0" layer="20"/>
-<wire x1="0" y1="0" x2="88.9" y2="0" width="0" layer="20"/>
-<wire x1="88.9" y1="0" x2="88.9" y2="44.45" width="0" layer="20"/>
-<wire x1="88.9" y1="44.45" x2="0" y2="44.45" width="0" layer="20"/>
+<wire x1="2.286" y1="0" x2="86.614" y2="0" width="0" layer="20"/>
+<wire x1="86.614" y1="0" x2="88.9" y2="2.286" width="0" layer="20" curve="90"/>
+<wire x1="88.9" y1="2.286" x2="88.9" y2="42.164" width="0" layer="20"/>
+<wire x1="88.9" y1="42.164" x2="86.614" y2="44.45" width="0" layer="20" curve="90"/>
+<wire x1="86.614" y1="44.45" x2="2.286" y2="44.45" width="0" layer="20"/>
+<wire x1="2.286" y1="44.45" x2="0" y2="42.164" width="0" layer="20" curve="90"/>
+<wire x1="0" y1="42.164" x2="0" y2="2.286" width="0" layer="20"/>
+<wire x1="0" y1="2.286" x2="2.286" y2="0" width="0" layer="20" curve="90"/>
 <hole x="85.725" y="41.275" drill="3.2"/>
 <hole x="85.725" y="3.175" drill="3.2"/>
 <hole x="3.175" y="41.275" drill="3.2"/>
 <hole x="3.175" y="3.175" drill="3.2"/>
-<text x="4.60375" y="24.209375" size="0.8128" layer="22" ratio="16" rot="MR0">VIN</text>
-<text x="4.7625" y="13.414375" size="0.8128" layer="22" ratio="16" rot="MR0">VIN</text>
-<text x="4.7625" y="15.478125" size="0.8128" layer="22" ratio="16" rot="MR0">CANH</text>
-<text x="4.7625" y="17.383125" size="0.8128" layer="22" ratio="16" rot="MR0">CANL</text>
-<text x="4.60375" y="28.178125" size="0.8128" layer="22" ratio="16" rot="MR0">CANL</text>
-<text x="4.60375" y="26.273125" size="0.8128" layer="22" ratio="16" rot="MR0">CANH</text>
-<text x="4.60375" y="30.241875" size="0.8128" layer="22" ratio="16" rot="MR0">GND</text>
-<text x="4.7625" y="19.446875" size="0.8128" layer="22" ratio="16" rot="MR0">GND</text>
+<text x="6.82625" y="24.209375" size="0.8128" layer="22" ratio="16" rot="MR0">VIN</text>
+<text x="6.82625" y="13.414375" size="0.8128" layer="22" ratio="16" rot="MR0">VIN</text>
+<text x="6.82625" y="15.478125" size="0.8128" layer="22" ratio="16" rot="MR0">CANH</text>
+<text x="6.82625" y="17.383125" size="0.8128" layer="22" ratio="16" rot="MR0">CANL</text>
+<text x="6.82625" y="28.178125" size="0.8128" layer="22" ratio="16" rot="MR0">CANL</text>
+<text x="6.82625" y="26.273125" size="0.8128" layer="22" ratio="16" rot="MR0">CANH</text>
+<text x="6.82625" y="30.241875" size="0.8128" layer="22" ratio="16" rot="MR0">GND</text>
+<text x="6.82625" y="19.446875" size="0.8128" layer="22" ratio="16" rot="MR0">GND</text>
 <text x="88.265" y="26.035" size="0.8128" layer="21" ratio="16" rot="SR90">Status</text>
 <text x="88.265" y="14.9225" size="0.8128" layer="21" ratio="16" rot="SR90">Error</text>
 <text x="88.265" y="21.11375" size="0.8128" layer="21" ratio="16" rot="SR90">CAN</text>
-<text x="76.04125" y="4.1275" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT8</text>
-<text x="67.15125" y="4.1275" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT7</text>
-<text x="58.26125" y="4.1275" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT6</text>
-<text x="49.37125" y="4.1275" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT5</text>
+<text x="76.04125" y="2.54" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT8</text>
+<text x="67.15125" y="2.54" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT7</text>
+<text x="58.26125" y="2.54" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT6</text>
+<text x="49.37125" y="2.54" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT5</text>
 <text x="15.24" y="6.6675" size="1.016" layer="22" ratio="20" rot="SMR180">- +</text>
-<text x="80.80375" y="41.275" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT1</text>
-<text x="33.575625" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">GND</text>
-<text x="26.908125" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">GND</text>
-<text x="20.240625" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">GND</text>
-<text x="13.573125" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">GND</text>
-<text x="36.591875" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">3V3</text>
-<text x="29.924375" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">3V3</text>
-<text x="23.256875" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">3V3</text>
-<text x="16.589375" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">3V3</text>
-<text x="71.91375" y="41.275" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT2</text>
-<text x="63.02375" y="41.275" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT3</text>
-<text x="54.13375" y="41.275" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT4</text>
-<text x="15.08125" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">SIG</text>
-<text x="21.74875" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">SIG</text>
-<text x="28.41625" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">SIG</text>
-<text x="35.08375" y="47.625" size="0.8128" layer="22" ratio="16" rot="MR90">SIG</text>
-<circle x="24.685625" y="21.59" radius="0.079375" width="0.254" layer="21"/>
+<text x="80.80375" y="41.91" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT1</text>
+<text x="71.91375" y="41.91" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT2</text>
+<text x="63.02375" y="41.91" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT3</text>
+<text x="54.13375" y="41.91" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT4</text>
+<circle x="15.478125" y="22.38375" radius="0.079375" width="0.254" layer="21"/>
 <circle x="22.225" y="23.098125" radius="0.079375" width="0.254" layer="21"/>
-<circle x="18.415" y="29.606875" radius="0.079375" width="0.254" layer="21"/>
-<circle x="86.0425" y="29.845" radius="0.079375" width="0.254" layer="21"/>
-<circle x="86.0425" y="24.13" radius="0.079375" width="0.254" layer="21"/>
-<circle x="86.0425" y="18.415" radius="0.079375" width="0.254" layer="21"/>
+<circle x="18.415" y="29.289375" radius="0.079375" width="0.254" layer="21"/>
 <circle x="55.5625" y="18.7325" radius="0.079375" width="0.254" layer="21"/>
-<circle x="45.72" y="26.67" radius="0.079375" width="0.254" layer="21"/>
-<circle x="19.05" y="20.6375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="41.91" y="25.4" radius="0.079375" width="0.254" layer="21"/>
+<circle x="18.0975" y="15.5575" radius="0.079375" width="0.254" layer="21"/>
 <circle x="18.415" y="26.3525" radius="0.079375" width="0.254" layer="21"/>
 <text x="13.17625" y="0.79375" size="1.27" layer="21" ratio="20" rot="R90">OUT1</text>
 <text x="22.06625" y="0.79375" size="1.27" layer="21" ratio="20" rot="R90">OUT2</text>
@@ -239,10 +228,10 @@
 <text x="36.5125" y="32.7025" size="1.27" layer="21" ratio="20" rot="R270">IN6</text>
 <text x="27.6225" y="32.7025" size="1.27" layer="21" ratio="20" rot="R270">IN7</text>
 <text x="18.7325" y="32.7025" size="1.27" layer="21" ratio="20" rot="R270">IN8</text>
-<text x="40.48125" y="4.1275" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT4</text>
-<text x="31.59125" y="4.1275" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT3</text>
-<text x="22.70125" y="4.1275" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT2</text>
-<text x="13.81125" y="4.1275" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT1</text>
+<text x="40.48125" y="2.54" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT4</text>
+<text x="31.59125" y="2.54" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT3</text>
+<text x="22.70125" y="2.54" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT2</text>
+<text x="13.81125" y="2.54" size="0.8128" layer="22" ratio="16" rot="MR180">OUTPUT1</text>
 <text x="24.13" y="6.6675" size="1.016" layer="22" ratio="20" rot="SMR180">- +</text>
 <text x="33.02" y="6.6675" size="1.016" layer="22" ratio="20" rot="SMR180">- +</text>
 <text x="41.91" y="6.6675" size="1.016" layer="22" ratio="20" rot="SMR180">- +</text>
@@ -250,10 +239,46 @@
 <text x="59.69" y="6.6675" size="1.016" layer="22" ratio="20" rot="SMR180">- +</text>
 <text x="68.58" y="6.6675" size="1.016" layer="22" ratio="20" rot="SMR180">- +</text>
 <text x="77.47" y="6.6675" size="1.016" layer="22" ratio="20" rot="SMR180">- +</text>
-<text x="45.24375" y="41.275" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT5</text>
-<text x="36.35375" y="41.275" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT6</text>
-<text x="27.46375" y="41.275" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT7</text>
-<text x="18.57375" y="41.275" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT8</text>
+<text x="45.24375" y="41.91" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT5</text>
+<text x="36.35375" y="41.91" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT6</text>
+<text x="27.46375" y="41.91" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT7</text>
+<text x="18.57375" y="41.91" size="0.8128" layer="22" ratio="16" rot="MR0">INPUT8</text>
+<text x="76.35875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">GND</text>
+<text x="80.3275" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">V+</text>
+<text x="78.343125" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">SIG</text>
+<circle x="79.375" y="25.4" radius="0.079375" width="0.254" layer="21"/>
+<circle x="81.5975" y="13.49375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="28.2575" y="13.49375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="19.3675" y="13.49375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="37.1475" y="13.49375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="46.0375" y="13.49375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="54.9275" y="13.49375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="63.8175" y="13.49375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="72.7075" y="13.49375" radius="0.079375" width="0.254" layer="21"/>
+<circle x="61.43625" y="19.20875" radius="0.079375" width="0.254" layer="21"/>
+<circle x="80.645" y="16.98625" radius="0.079375" width="0.254" layer="21"/>
+<circle x="12.85875" y="24.28875" radius="0.079375" width="0.254" layer="21"/>
+<text x="67.46875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">GND</text>
+<text x="71.4375" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">V+</text>
+<text x="69.453125" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">SIG</text>
+<text x="58.57875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">GND</text>
+<text x="62.5475" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">V+</text>
+<text x="60.563125" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">SIG</text>
+<text x="14.12875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">GND</text>
+<text x="18.0975" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">V+</text>
+<text x="16.113125" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">SIG</text>
+<text x="23.01875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">GND</text>
+<text x="26.9875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">V+</text>
+<text x="25.003125" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">SIG</text>
+<text x="31.90875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">GND</text>
+<text x="35.8775" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">V+</text>
+<text x="33.893125" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">SIG</text>
+<text x="40.79875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">GND</text>
+<text x="44.7675" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">V+</text>
+<text x="42.783125" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">SIG</text>
+<text x="49.68875" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">GND</text>
+<text x="53.6575" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">V+</text>
+<text x="51.673125" y="37.62375" size="0.8128" layer="22" ratio="16" rot="SMR90">SIG</text>
 </plain>
 <libraries>
 <library name="SparkFun-Passives">
@@ -578,10 +603,10 @@ chip</description>
 <text x="-0.9525" y="-0.3905" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="POGOPROG-CONN-4-ALLSMT">
-<smd name="3" x="0" y="-1.27" dx="0.889" dy="0.8128" layer="1"/>
-<smd name="2" x="0" y="0" dx="0.889" dy="0.8128" layer="1"/>
-<smd name="4" x="0" y="-2.54" dx="0.889" dy="0.8128" layer="1"/>
-<smd name="1" x="0" y="1.27" dx="0.889" dy="0.8128" layer="1"/>
+<smd name="3" x="0" y="-1.27" dx="0.889" dy="0.8128" layer="1" cream="no"/>
+<smd name="2" x="0" y="0" dx="0.889" dy="0.8128" layer="1" cream="no"/>
+<smd name="4" x="0" y="-2.54" dx="0.889" dy="0.8128" layer="1" cream="no"/>
+<smd name="1" x="0" y="1.27" dx="0.889" dy="0.8128" layer="1" cream="no"/>
 <wire x1="-0.635" y1="1.905" x2="0.635" y2="1.905" width="0.127" layer="21"/>
 <wire x1="0.635" y1="1.905" x2="0.635" y2="-3.175" width="0.127" layer="21"/>
 <wire x1="0.635" y1="-3.175" x2="-0.635" y2="-3.175" width="0.127" layer="21"/>
@@ -4281,7 +4306,7 @@ Source: http://www.semicon.toshiba.co.jp
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
-<designrules name="oshpark-2layer *">
+<designrules name="Elecrow_2-layer_PCB_eagle_rule *">
 <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 Die Standard-Design-Rules sind so gewählt, dass sie für 
@@ -4289,29 +4314,35 @@ die meisten Anwendungen passen. Sollte i
 besondere Anforderungen haben, treffen Sie die erforderlichen
 Einstellungen hier und speichern die Design Rules unter 
 einem neuen Namen ab.</description>
-<description language="en">&lt;b&gt;Laen's PCB Order Design Rules&lt;/b&gt;
+<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
-Please make sure your boards conform to these design rules.</description>
+The default Design Rules have been set to cover
+a wide range of applications. Your particular design
+may have different requirements, so please make the
+necessary adjustments and save your customized
+design rules under a new name.</description>
+<description language="zh">&lt;b&gt;Elecrow PCB EAGLE Design Rules&lt;/b&gt;
+</description>
 <param name="layerSetup" value="(1*16)"/>
-<param name="mtCopper" value="0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm"/>
-<param name="mtIsolate" value="1.5011mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm"/>
+<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
+<param name="mtIsolate" value="1.6mm 1.2mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
 <param name="mdWireWire" value="6mil"/>
 <param name="mdWirePad" value="6mil"/>
 <param name="mdWireVia" value="6mil"/>
 <param name="mdPadPad" value="6mil"/>
 <param name="mdPadVia" value="6mil"/>
-<param name="mdViaVia" value="6mil"/>
-<param name="mdSmdPad" value="6mil"/>
-<param name="mdSmdVia" value="6mil"/>
-<param name="mdSmdSmd" value="6mil"/>
+<param name="mdViaVia" value="8mil"/>
+<param name="mdSmdPad" value="0mil"/>
+<param name="mdSmdVia" value="0mil"/>
+<param name="mdSmdSmd" value="0mil"/>
 <param name="mdViaViaSameLayer" value="8mil"/>
 <param name="mnLayersViaInSmd" value="2"/>
 <param name="mdCopperDimension" value="15mil"/>
-<param name="mdDrill" value="6mil"/>
+<param name="mdDrill" value="10mil"/>
 <param name="mdSmdStop" value="0mil"/>
 <param name="msWidth" value="6mil"/>
 <param name="msDrill" value="12mil"/>
-<param name="msMicroVia" value="10mil"/>
+<param name="msMicroVia" value="12mil"/>
 <param name="msBlindViaRatio" value="0.5"/>
 <param name="rvPadTop" value="0.25"/>
 <param name="rvPadInner" value="0.25"/>
@@ -4320,15 +4351,15 @@ Please make sure your boards conform to 
 <param name="rvViaInner" value="0.25"/>
 <param name="rvMicroViaOuter" value="0.25"/>
 <param name="rvMicroViaInner" value="0.25"/>
-<param name="rlMinPadTop" value="7mil"/>
+<param name="rlMinPadTop" value="6mil"/>
 <param name="rlMaxPadTop" value="20mil"/>
-<param name="rlMinPadInner" value="7mil"/>
+<param name="rlMinPadInner" value="6mil"/>
 <param name="rlMaxPadInner" value="20mil"/>
-<param name="rlMinPadBottom" value="7mil"/>
+<param name="rlMinPadBottom" value="6mil"/>
 <param name="rlMaxPadBottom" value="20mil"/>
-<param name="rlMinViaOuter" value="7mil"/>
+<param name="rlMinViaOuter" value="6mil"/>
 <param name="rlMaxViaOuter" value="20mil"/>
-<param name="rlMinViaInner" value="7mil"/>
+<param name="rlMinViaInner" value="6mil"/>
 <param name="rlMaxViaInner" value="20mil"/>
 <param name="rlMinMicroViaOuter" value="4mil"/>
 <param name="rlMaxMicroViaOuter" value="20mil"/>
@@ -4336,16 +4367,16 @@ Please make sure your boards conform to 
 <param name="rlMaxMicroViaInner" value="20mil"/>
 <param name="psTop" value="-1"/>
 <param name="psBottom" value="-1"/>
-<param name="psFirst" value="-1"/>
+<param name="psFirst" value="0"/>
 <param name="psElongationLong" value="100"/>
 <param name="psElongationOffset" value="100"/>
 <param name="mvStopFrame" value="1"/>
 <param name="mvCreamFrame" value="0"/>
-<param name="mlMinStopFrame" value="2.5mil"/>
-<param name="mlMaxStopFrame" value="2.5mil"/>
+<param name="mlMinStopFrame" value="0mil"/>
+<param name="mlMaxStopFrame" value="0mil"/>
 <param name="mlMinCreamFrame" value="0mil"/>
 <param name="mlMaxCreamFrame" value="0mil"/>
-<param name="mlViaStopLimit" value="0mil"/>
+<param name="mlViaStopLimit" value="15mil"/>
 <param name="srRoundness" value="0"/>
 <param name="srMinRoundness" value="0mil"/>
 <param name="srMaxRoundness" value="0mil"/>
@@ -4356,7 +4387,7 @@ Please make sure your boards conform to 
 <param name="checkGrid" value="0"/>
 <param name="checkAngle" value="1"/>
 <param name="checkFont" value="1"/>
-<param name="checkRestrict" value="1"/>
+<param name="checkRestrict" value="0"/>
 <param name="useDiameter" value="13"/>
 <param name="maxErrors" value="50"/>
 </designrules>
@@ -4457,218 +4488,218 @@ Please make sure your boards conform to 
 </pass>
 </autorouter>
 <elements>
-<element name="U$1" library="Protofusion-logos" package="HYDROBOT-LOGO" value="" x="30.7975" y="17.1323" rot="MR90"/>
-<element name="U$3" library="Protofusion-logos" package="BYPROTOFUSION-LOGO" value="" x="51.7525" y="21.9075" rot="MR90"/>
-<element name="R18" library="SparkFun-Resistors" package="0402-RES" value="31.6K 1%" x="17.145" y="26.9875" rot="R90"/>
-<element name="R19" library="SparkFun-Resistors" package="0402-RES" value="10K 1%" x="17.145" y="24.4475" rot="R90"/>
-<element name="L1" library="SparkFun-Passives" package="NRG4026" value="15uH" x="23.495" y="26.9875" rot="R90"/>
-<element name="C10" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="19.685" y="26.9875"/>
-<element name="C9" library="SparkFun-Passives" package="0805" value="4.7uF" x="19.685" y="22.225" rot="R180"/>
-<element name="C11" library="SparkFun-Passives" package="0805" value="10uF" x="28.575" y="26.9875" rot="R90"/>
-<element name="D6" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="23.495" y="23.8125">
+<element name="U$1" library="Protofusion-logos" package="HYDROBOT-LOGO" value="" x="55.5752" y="20.955" rot="MR0"/>
+<element name="U$3" library="Protofusion-logos" package="BYPROTOFUSION-LOGO" value="" x="49.2125" y="19.05" rot="MR0"/>
+<element name="R202" library="SparkFun-Resistors" package="0402-RES" value="31.6K 1%" x="17.145" y="26.9875" rot="R90"/>
+<element name="R203" library="SparkFun-Resistors" package="0402-RES" value="10K 1%" x="17.145" y="24.4475" rot="R90"/>
+<element name="L201" library="SparkFun-Passives" package="NRG4026" value="15uH" x="23.495" y="26.9875" rot="R90"/>
+<element name="C206" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="19.685" y="26.9875"/>
+<element name="C205" library="SparkFun-Passives" package="0805" value="4.7uF" x="19.685" y="22.225" rot="R180"/>
+<element name="C207" library="SparkFun-Passives" package="0805" value="10uF" x="28.575" y="26.9875" rot="R90"/>
+<element name="D202" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="23.495" y="23.8125">
 <attribute name="PROD_ID" value="DIO-11623" x="-42.8625" y="65.0875" size="1.778" layer="27" display="off"/>
 </element>
-<element name="D8" library="SparkFun-LED" package="LED-0603" value="Green" x="86.6775" y="27.94"/>
-<element name="D9" library="SparkFun-LED" package="LED-0603" value="Blue" x="86.6775" y="22.225"/>
-<element name="D10" library="SparkFun-LED" package="LED-0603" value="Red" x="86.6775" y="16.51"/>
-<element name="R20" library="SparkFun-Resistors" package="0402-RES" value="200" x="85.4075" y="27.94" rot="R270"/>
-<element name="R21" library="SparkFun-Resistors" package="0402-RES" value="10" x="85.4075" y="22.225" rot="R270"/>
-<element name="R22" library="SparkFun-Resistors" package="0402-RES" value="200" x="85.4075" y="16.51" rot="R270"/>
-<element name="C14" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="20.0025" y="18.0975" rot="R270"/>
-<element name="U3" library="Protofusion" package="SOIC8" value="SN65HVD234" x="17.4625" y="15.5575" rot="R90"/>
-<element name="U11" library="Protofusion" package="SOT23-6" value="MCP16301" x="19.685" y="24.765" rot="R90"/>
-<element name="D7" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="19.685" y="28.575">
+<element name="D204" library="SparkFun-LED" package="LED-0603" value="Green" x="86.6775" y="27.94"/>
+<element name="D205" library="SparkFun-LED" package="LED-0603" value="Blue" x="86.6775" y="22.225"/>
+<element name="D206" library="SparkFun-LED" package="LED-0603" value="Red" x="86.6775" y="16.51"/>
+<element name="R204" library="SparkFun-Resistors" package="0402-RES" value="200" x="85.4075" y="27.94" rot="R270"/>
+<element name="R205" library="SparkFun-Resistors" package="0402-RES" value="10" x="85.4075" y="22.225" rot="R270"/>
+<element name="R206" library="SparkFun-Resistors" package="0402-RES" value="200" x="85.4075" y="16.51" rot="R270"/>
+<element name="C210" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="20.0025" y="18.0975" rot="R270"/>
+<element name="U203" library="Protofusion" package="SOIC8" value="SN65HVD234" x="17.4625" y="15.5575" rot="R90"/>
+<element name="U201" library="Protofusion" package="SOT23-6" value="MCP16301" x="19.685" y="24.765" rot="R90"/>
+<element name="D203" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="19.685" y="28.575">
 <attribute name="PROD_ID" value="DIO-11623" x="-56.8325" y="53.6575" size="1.778" layer="27" display="off"/>
 </element>
-<element name="C12" library="SparkFun-Passives" package="0805" value="10uF" x="26.67" y="26.9875" rot="R270"/>
-<element name="Q3" library="SparkFun-DiscreteSemi" package="SOT23-3@1" value="" x="14.2875" y="26.035">
+<element name="C208" library="SparkFun-Passives" package="0805" value="10uF" x="26.67" y="26.9875" rot="R270"/>
+<element name="Q201" library="SparkFun-DiscreteSemi" package="SOT23-3@1" value="" x="14.2875" y="26.035">
 <attribute name="PROD_ID" value="TRANS-08285" x="-88.9" y="29.845" size="1.778" layer="27" display="off"/>
 </element>
-<element name="R17" library="SparkFun-Resistors" package="0402-RES" value="100K" x="14.2875" y="21.2725" rot="R180"/>
-<element name="D5" library="SparkFun-DiscreteSemi" package="SOD-323" value="8V" x="14.2875" y="23.1775" rot="R180">
+<element name="R201" library="SparkFun-Resistors" package="0402-RES" value="100K" x="14.2875" y="21.2725" rot="R180"/>
+<element name="D201" library="SparkFun-DiscreteSemi" package="SOD-323" value="8V" x="14.2875" y="23.1775" rot="R180">
 <attribute name="PROD_ID" value="DIO-12442" x="126.6825" y="19.685" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="Q1" library="Protofusion" package="MICROFET_2X2" value="N-FET" x="20.955" y="10.16" rot="R180">
+<element name="Q101" library="Protofusion" package="MICROFET_2X2" value="N-FET" x="20.955" y="10.16" rot="R180">
 <attribute name="PROD_ID" value="TRANS-09516" x="20.955" y="-0.3175" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="R9" library="SparkFun-Resistors" package="0402-RES" value="10" x="20.955" y="6.35"/>
-<element name="R11" library="SparkFun-Resistors" package="0402-RES" value="100K" x="20.955" y="7.9375"/>
-<element name="D1" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="18.0975" y="12.7" rot="R180">
+<element name="R117" library="SparkFun-Resistors" package="0402-RES" value="10" x="20.955" y="6.35"/>
+<element name="R121" library="SparkFun-Resistors" package="0402-RES" value="100K" x="20.955" y="7.9375"/>
+<element name="D101" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="18.0975" y="12.7" rot="R180">
 <attribute name="PROD_ID" value="DIO-11623" x="35.8775" y="-1.5875" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="R10" library="SparkFun-Resistors" package="0402-RES" value="10" x="20.955" y="14.12875" rot="R180"/>
-<element name="R12" library="SparkFun-Resistors" package="0402-RES" value="100K" x="20.955" y="12.7" rot="R180"/>
-<element name="D2" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="26.9875" y="12.7" rot="R180">
+<element name="R118" library="SparkFun-Resistors" package="0402-RES" value="10" x="20.955" y="14.12875" rot="R180"/>
+<element name="R122" library="SparkFun-Resistors" package="0402-RES" value="100K" x="20.955" y="12.7" rot="R180"/>
+<element name="D102" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="26.9875" y="12.7" rot="R180">
 <attribute name="PROD_ID" value="DIO-11623" x="44.7675" y="-1.5875" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="R13" library="SparkFun-Resistors" package="0402-RES" value="10" x="38.735" y="6.35"/>
-<element name="R15" library="SparkFun-Resistors" package="0402-RES" value="100K" x="38.735" y="7.9375"/>
-<element name="D3" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="35.8775" y="12.7" rot="R180">
+<element name="R125" library="SparkFun-Resistors" package="0402-RES" value="10" x="38.735" y="6.35"/>
+<element name="R129" library="SparkFun-Resistors" package="0402-RES" value="100K" x="38.735" y="7.9375"/>
+<element name="D105" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="35.8775" y="12.7" rot="R180">
 <attribute name="PROD_ID" value="DIO-11623" x="53.6575" y="-1.5875" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="R14" library="SparkFun-Resistors" package="0402-RES" value="10" x="38.735" y="14.12875" rot="R180"/>
-<element name="R16" library="SparkFun-Resistors" package="0402-RES" value="100K" x="38.735" y="12.7" rot="R180"/>
-<element name="D4" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="44.7675" y="12.7" rot="R180">
+<element name="R126" library="SparkFun-Resistors" package="0402-RES" value="10" x="38.735" y="14.12875" rot="R180"/>
+<element name="R130" library="SparkFun-Resistors" package="0402-RES" value="100K" x="38.735" y="12.7" rot="R180"/>
+<element name="D106" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="44.7675" y="12.7" rot="R180">
 <attribute name="PROD_ID" value="DIO-11623" x="62.5475" y="-1.5875" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="J7" library="Protofusion" package="POGOPROG-CONN-4-ALLSMT" value="" x="86.36" y="11.43"/>
-<element name="U2" library="Protofusion" package="LQFP32" value="STM32F042K-T" x="52.07" y="22.225" rot="R180"/>
-<element name="C5" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="60.0075" y="24.13" rot="R180"/>
-<element name="C7" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="56.8325" y="17.78"/>
-<element name="C13" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="47.3075" y="26.9875"/>
-<element name="Y1" library="Protofusion" package="ABM8G" value="12MHz" x="59.53125" y="20.32" rot="R90"/>
-<element name="C8" library="SparkFun-Passives" package="0402-CAP" value="9pF" x="60.0075" y="22.86"/>
-<element name="C6" library="SparkFun-Passives" package="0402-CAP" value="9pF" x="60.0075" y="17.78"/>
-<element name="OK1" library="optocoupler" package="MINI-FLAT-16" value="TLP283-4" x="74.295" y="22.225" rot="R270">
+<element name="J111" library="Protofusion" package="POGOPROG-CONN-4-ALLSMT" value="POGOPIN-CONN-4" x="86.36" y="11.1125"/>
+<element name="U202" library="Protofusion" package="LQFP32" value="STM32F042K-T" x="52.07" y="22.225" rot="R180"/>
+<element name="C201" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="60.0075" y="24.13" rot="R180"/>
+<element name="C203" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="56.8325" y="17.78"/>
+<element name="C209" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="47.3075" y="26.9875"/>
+<element name="Y201" library="Protofusion" package="ABM8G" value="12MHz" x="59.53125" y="20.32" rot="R90"/>
+<element name="C204" library="SparkFun-Passives" package="0402-CAP" value="9pF" x="60.0075" y="22.86"/>
+<element name="C202" library="SparkFun-Passives" package="0402-CAP" value="9pF" x="60.0075" y="17.78"/>
+<element name="U102" library="optocoupler" package="MINI-FLAT-16" value="TLP283-4" x="74.295" y="22.225" rot="R270">
 <attribute name="OC_FARNELL" value="unknown" x="74.295" y="22.225" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="OC_NEWARK" value="unknown" x="74.295" y="22.225" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="MF" value="" x="74.295" y="22.225" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="MPN" value="" x="74.295" y="22.225" size="1.778" layer="27" rot="R270" display="off"/>
 </element>
-<element name="R1" library="SparkFun-Resistors" package="0402-RES" value="600" x="78.105" y="26.9875"/>
-<element name="R3" library="SparkFun-Resistors" package="0402-RES" value="10K" x="78.105" y="16.1925"/>
-<element name="C1" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="78.105" y="17.4625"/>
-<element name="U1" library="Protofusion" package="PTC-1206" value="PTC1206" x="13.335" y="30.1625" rot="R270"/>
-<element name="R2" library="SparkFun-Resistors" package="0402-RES" value="600" x="75.565" y="26.9875"/>
-<element name="R4" library="SparkFun-Resistors" package="0402-RES" value="10K" x="75.565" y="16.1925"/>
-<element name="C2" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="75.565" y="17.4625"/>
-<element name="R5" library="SparkFun-Resistors" package="0402-RES" value="600" x="73.025" y="26.9875"/>
-<element name="R7" library="SparkFun-Resistors" package="0402-RES" value="10K" x="73.025" y="16.1925"/>
-<element name="C3" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="73.025" y="17.4625"/>
-<element name="R6" library="SparkFun-Resistors" package="0402-RES" value="600" x="70.485" y="26.9875"/>
-<element name="R8" library="SparkFun-Resistors" package="0402-RES" value="10K" x="70.485" y="16.1925"/>
-<element name="C4" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="70.485" y="17.4625"/>
-<element name="Q2" library="Protofusion" package="MICROFET_2X2" value="N-FET" x="38.735" y="10.16" rot="R180">
+<element name="R101" library="SparkFun-Resistors" package="0402-RES" value="600" x="78.105" y="26.9875"/>
+<element name="R105" library="SparkFun-Resistors" package="0402-RES" value="10K" x="78.105" y="16.1925"/>
+<element name="C101" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="78.105" y="17.4625"/>
+<element name="U101" library="Protofusion" package="PTC-1206" value="PTC1206" x="13.335" y="30.1625" rot="R270"/>
+<element name="R102" library="SparkFun-Resistors" package="0402-RES" value="600" x="75.565" y="26.9875"/>
+<element name="R106" library="SparkFun-Resistors" package="0402-RES" value="10K" x="75.565" y="16.1925"/>
+<element name="C102" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="75.565" y="17.4625"/>
+<element name="R109" library="SparkFun-Resistors" package="0402-RES" value="600" x="73.025" y="26.9875"/>
+<element name="R113" library="SparkFun-Resistors" package="0402-RES" value="10K" x="73.025" y="16.1925"/>
+<element name="C105" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="73.025" y="17.4625"/>
+<element name="R110" library="SparkFun-Resistors" package="0402-RES" value="600" x="70.485" y="26.9875"/>
+<element name="R114" library="SparkFun-Resistors" package="0402-RES" value="10K" x="70.485" y="16.1925"/>
+<element name="C106" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="70.485" y="17.4625"/>
+<element name="Q103" library="Protofusion" package="MICROFET_2X2" value="N-FET" x="38.735" y="10.16" rot="R180">
 <attribute name="PROD_ID" value="TRANS-09516" x="38.735" y="10.16" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="U$2" library="Protofusion-logos" package="RELAYDRIVE" value="" x="13.0175" y="21.9075" rot="MR90"/>
-<element name="U$4" library="SparkFun-Aesthetics" package="OSHW-LOGO-M" value="" x="6.985" y="38.1" rot="R270"/>
-<element name="D11" library="SparkFun-LED" package="LED-0603" value="Yellow" x="14.9225" y="12.7" rot="R270"/>
-<element name="R23" library="SparkFun-Resistors" package="0402-RES" value="200" x="14.9225" y="14.12875" rot="R180"/>
-<element name="D12" library="SparkFun-LED" package="LED-0603" value="Yellow" x="23.8125" y="12.7" rot="R270"/>
-<element name="R24" library="SparkFun-Resistors" package="0402-RES" value="200" x="23.8125" y="14.12875" rot="R180"/>
-<element name="D13" library="SparkFun-LED" package="LED-0603" value="Yellow" x="32.7025" y="12.7" rot="R270"/>
-<element name="R25" library="SparkFun-Resistors" package="0402-RES" value="200" x="32.7025" y="14.12875" rot="R180"/>
-<element name="D14" library="SparkFun-LED" package="LED-0603" value="Yellow" x="41.5925" y="12.7" rot="R270"/>
-<element name="R26" library="SparkFun-Resistors" package="0402-RES" value="200" x="41.5925" y="14.12875" rot="R180"/>
-<element name="D15" library="SparkFun-LED" package="LED-0603" value="Yellow" x="50.4825" y="12.7" rot="R270"/>
-<element name="R27" library="SparkFun-Resistors" package="0402-RES" value="200" x="50.4825" y="14.12875" rot="R180"/>
-<element name="D16" library="SparkFun-LED" package="LED-0603" value="Yellow" x="59.3725" y="12.7" rot="R270"/>
-<element name="R28" library="SparkFun-Resistors" package="0402-RES" value="200" x="59.3725" y="14.12875" rot="R180"/>
-<element name="D17" library="SparkFun-LED" package="LED-0603" value="Yellow" x="68.2625" y="12.7" rot="R270"/>
-<element name="R29" library="SparkFun-Resistors" package="0402-RES" value="200" x="68.2625" y="14.12875" rot="R180"/>
-<element name="D18" library="SparkFun-LED" package="LED-0603" value="Yellow" x="77.1525" y="12.7" rot="R270"/>
-<element name="R30" library="SparkFun-Resistors" package="0402-RES" value="200" x="77.1525" y="14.12875" rot="R180"/>
-<element name="J12" library="Protofusion" package="JST-PA-4" value="JST-PA-4PTH" x="8.255" y="27.6225" rot="R90"/>
-<element name="J13" library="Protofusion" package="JST-PA-4" value="JST-PA-4PTH" x="8.255" y="16.8275" rot="R90"/>
-<element name="FRAME3" library="SparkFun-Aesthetics" package="CREATIVE_COMMONS" value="FRAME-LEDGER" x="0" y="0" rot="R270"/>
-<element name="OK2" library="optocoupler" package="MINI-FLAT-16" value="TLP283-4" x="36.83" y="22.225" rot="R270">
+<element name="U$2" library="Protofusion-logos" package="RELAYDRIVE" value="" x="9.525" y="15.24" rot="MR90"/>
+<element name="U$4" library="SparkFun-Aesthetics" package="OSHW-LOGO-M" value="" x="6.985" y="6.6675"/>
+<element name="D207" library="SparkFun-LED" package="LED-0603" value="Yellow" x="14.9225" y="12.7" rot="R270"/>
+<element name="R207" library="SparkFun-Resistors" package="0402-RES" value="200" x="14.9225" y="14.12875" rot="R180"/>
+<element name="D208" library="SparkFun-LED" package="LED-0603" value="Yellow" x="23.8125" y="12.7" rot="R270"/>
+<element name="R208" library="SparkFun-Resistors" package="0402-RES" value="200" x="23.8125" y="14.12875" rot="R180"/>
+<element name="D209" library="SparkFun-LED" package="LED-0603" value="Yellow" x="32.7025" y="12.7" rot="R270"/>
+<element name="R209" library="SparkFun-Resistors" package="0402-RES" value="200" x="32.7025" y="14.12875" rot="R180"/>
+<element name="D210" library="SparkFun-LED" package="LED-0603" value="Yellow" x="41.5925" y="12.7" rot="R270"/>
+<element name="R210" library="SparkFun-Resistors" package="0402-RES" value="200" x="41.5925" y="14.12875" rot="R180"/>
+<element name="D211" library="SparkFun-LED" package="LED-0603" value="Yellow" x="50.4825" y="12.7" rot="R270"/>
+<element name="R211" library="SparkFun-Resistors" package="0402-RES" value="200" x="50.4825" y="14.12875" rot="R180"/>
+<element name="D212" library="SparkFun-LED" package="LED-0603" value="Yellow" x="59.3725" y="12.7" rot="R270"/>
+<element name="R212" library="SparkFun-Resistors" package="0402-RES" value="200" x="59.3725" y="14.12875" rot="R180"/>
+<element name="D213" library="SparkFun-LED" package="LED-0603" value="Yellow" x="68.2625" y="12.7" rot="R270"/>
+<element name="R213" library="SparkFun-Resistors" package="0402-RES" value="200" x="68.2625" y="14.12875" rot="R180"/>
+<element name="D214" library="SparkFun-LED" package="LED-0603" value="Yellow" x="77.1525" y="12.7" rot="R270"/>
+<element name="R214" library="SparkFun-Resistors" package="0402-RES" value="200" x="77.1525" y="14.12875" rot="R180"/>
+<element name="J109" library="Protofusion" package="JST-PA-4" value="JST-PA-4PTH" x="8.255" y="27.6225" rot="R90"/>
+<element name="J110" library="Protofusion" package="JST-PA-4" value="JST-PA-4PTH" x="8.255" y="16.8275" rot="R90"/>
+<element name="FRAME101" library="SparkFun-Aesthetics" package="CREATIVE_COMMONS" value="FRAME-LEDGER" x="0" y="0" rot="R270"/>
+<element name="U103" library="optocoupler" package="MINI-FLAT-16" value="TLP283-4" x="36.83" y="22.225" rot="R270">
 <attribute name="MF" value="" x="52.07" y="31.75" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="OC_FARNELL" value="unknown" x="52.07" y="31.75" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="MPN" value="" x="52.07" y="31.75" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="OC_NEWARK" value="unknown" x="52.07" y="31.75" size="1.778" layer="27" rot="R270" display="off"/>
 </element>
-<element name="R31" library="SparkFun-Resistors" package="0402-RES" value="600" x="40.64" y="26.9875"/>
-<element name="R32" library="SparkFun-Resistors" package="0402-RES" value="10K" x="40.64" y="17.4625"/>
-<element name="C15" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="40.64" y="16.1925"/>
-<element name="R33" library="SparkFun-Resistors" package="0402-RES" value="600" x="38.1" y="26.9875"/>
-<element name="R34" library="SparkFun-Resistors" package="0402-RES" value="10K" x="38.1" y="17.4625"/>
-<element name="C16" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="38.1" y="16.1925"/>
-<element name="R35" library="SparkFun-Resistors" package="0402-RES" value="600" x="35.56" y="26.9875"/>
-<element name="R36" library="SparkFun-Resistors" package="0402-RES" value="10K" x="35.56" y="17.4625"/>
-<element name="C17" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="35.56" y="16.1925"/>
-<element name="R37" library="SparkFun-Resistors" package="0402-RES" value="600" x="33.02" y="26.9875"/>
-<element name="R38" library="SparkFun-Resistors" package="0402-RES" value="10K" x="33.02" y="17.4625"/>
-<element name="C18" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="33.02" y="16.1925"/>
-<element name="Q4" library="Protofusion" package="MICROFET_2X2" value="N-FET" x="56.515" y="10.16" rot="R180">
+<element name="R103" library="SparkFun-Resistors" package="0402-RES" value="600" x="40.64" y="26.9875"/>
+<element name="R107" library="SparkFun-Resistors" package="0402-RES" value="10K" x="40.64" y="17.4625"/>
+<element name="C103" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="40.64" y="16.1925"/>
+<element name="R104" library="SparkFun-Resistors" package="0402-RES" value="600" x="38.1" y="26.9875"/>
+<element name="R108" library="SparkFun-Resistors" package="0402-RES" value="10K" x="38.1" y="17.4625"/>
+<element name="C104" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="38.1" y="16.1925"/>
+<element name="R111" library="SparkFun-Resistors" package="0402-RES" value="600" x="35.56" y="26.9875"/>
+<element name="R115" library="SparkFun-Resistors" package="0402-RES" value="10K" x="35.56" y="17.4625"/>
+<element name="C107" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="35.56" y="16.1925"/>
+<element name="R112" library="SparkFun-Resistors" package="0402-RES" value="600" x="33.02" y="26.9875"/>
+<element name="R116" library="SparkFun-Resistors" package="0402-RES" value="10K" x="33.02" y="17.4625"/>
+<element name="C108" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="33.02" y="16.1925"/>
+<element name="Q102" library="Protofusion" package="MICROFET_2X2" value="N-FET" x="56.515" y="10.16" rot="R180">
 <attribute name="PROD_ID" value="TRANS-09516" x="56.515" y="-10.795" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="R39" library="SparkFun-Resistors" package="0402-RES" value="10" x="56.515" y="6.35"/>
-<element name="R40" library="SparkFun-Resistors" package="0402-RES" value="100K" x="56.515" y="7.9375"/>
-<element name="D19" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="53.6575" y="12.7" rot="R180">
+<element name="R119" library="SparkFun-Resistors" package="0402-RES" value="10" x="56.515" y="6.35"/>
+<element name="R123" library="SparkFun-Resistors" package="0402-RES" value="100K" x="56.515" y="7.9375"/>
+<element name="D103" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="53.6575" y="12.7" rot="R180">
 <attribute name="PROD_ID" value="DIO-11623" x="85.725" y="-12.065" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="R41" library="SparkFun-Resistors" package="0402-RES" value="10" x="56.515" y="14.12875" rot="R180"/>
-<element name="R42" library="SparkFun-Resistors" package="0402-RES" value="100K" x="56.515" y="12.7" rot="R180"/>
-<element name="D20" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="62.5475" y="12.7" rot="R180">
+<element name="R120" library="SparkFun-Resistors" package="0402-RES" value="10" x="56.515" y="14.12875" rot="R180"/>
+<element name="R124" library="SparkFun-Resistors" package="0402-RES" value="100K" x="56.515" y="12.7" rot="R180"/>
+<element name="D104" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="62.5475" y="12.7" rot="R180">
 <attribute name="PROD_ID" value="DIO-11623" x="115.2525" y="-12.065" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="R43" library="SparkFun-Resistors" package="0402-RES" value="10" x="74.295" y="6.35"/>
-<element name="R44" library="SparkFun-Resistors" package="0402-RES" value="100K" x="74.295" y="7.9375"/>
-<element name="D21" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="71.4375" y="12.7" rot="R180">
+<element name="R127" library="SparkFun-Resistors" package="0402-RES" value="10" x="74.295" y="6.35"/>
+<element name="R131" library="SparkFun-Resistors" package="0402-RES" value="100K" x="74.295" y="7.9375"/>
+<element name="D107" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="71.4375" y="12.7" rot="R180">
 <attribute name="PROD_ID" value="DIO-11623" x="144.78" y="-12.065" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="R45" library="SparkFun-Resistors" package="0402-RES" value="10" x="74.295" y="14.12875" rot="R180"/>
-<element name="R46" library="SparkFun-Resistors" package="0402-RES" value="100K" x="74.295" y="12.7" rot="R180"/>
-<element name="D22" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="80.3275" y="12.7" rot="R180">
+<element name="R128" library="SparkFun-Resistors" package="0402-RES" value="10" x="74.295" y="14.12875" rot="R180"/>
+<element name="R132" library="SparkFun-Resistors" package="0402-RES" value="100K" x="74.295" y="12.7" rot="R180"/>
+<element name="D108" library="SparkFun-DiscreteSemi" package="SOD-323" value="" x="80.3275" y="12.7" rot="R180">
 <attribute name="PROD_ID" value="DIO-11623" x="150.495" y="-15.24" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="Q5" library="Protofusion" package="MICROFET_2X2" value="N-FET" x="74.295" y="10.16" rot="R180">
+<element name="Q104" library="Protofusion" package="MICROFET_2X2" value="N-FET" x="74.295" y="10.16" rot="R180">
 <attribute name="PROD_ID" value="TRANS-09516" x="151.4475" y="-4.445" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
-<element name="J8" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="16.51" y="8.255" rot="R180"/>
-<element name="J9" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="25.4" y="8.255" rot="R180"/>
-<element name="J10" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="34.29" y="8.255" rot="R180"/>
-<element name="J11" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="43.18" y="8.255" rot="R180"/>
-<element name="J16" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="52.07" y="8.255" rot="R180"/>
-<element name="J17" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="60.96" y="8.255" rot="R180"/>
-<element name="J18" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="69.85" y="8.255" rot="R180"/>
-<element name="J19" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="78.74" y="8.255" rot="R180"/>
-<element name="J1" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="78.74" y="36.195"/>
-<element name="J2" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="69.85" y="36.195"/>
-<element name="J3" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="60.96" y="36.195"/>
-<element name="J4" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="52.07" y="36.195"/>
-<element name="J5" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="43.18" y="36.195"/>
-<element name="J6" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="34.29" y="36.195"/>
-<element name="J14" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="25.4" y="36.195"/>
-<element name="J15" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="16.51" y="36.195"/>
-<element name="D23" library="SparkFun-LED" package="LED-0603" value="Green" x="78.74" y="31.75" rot="R270"/>
-<element name="R47" library="SparkFun-Resistors" package="0402-RES" value="200" x="78.74" y="30.1625" rot="R180"/>
-<element name="D24" library="SparkFun-LED" package="LED-0603" value="Green" x="69.85" y="31.75" rot="R270"/>
-<element name="R48" library="SparkFun-Resistors" package="0402-RES" value="200" x="69.85" y="30.1625" rot="R180"/>
-<element name="D25" library="SparkFun-LED" package="LED-0603" value="Green" x="60.96" y="31.75" rot="R270"/>
-<element name="R49" library="SparkFun-Resistors" package="0402-RES" value="200" x="60.96" y="30.1625" rot="R180"/>
-<element name="D26" library="SparkFun-LED" package="LED-0603" value="Green" x="52.07" y="31.75" rot="R270"/>
-<element name="R50" library="SparkFun-Resistors" package="0402-RES" value="200" x="52.07" y="30.1625" rot="R180"/>
-<element name="D27" library="SparkFun-LED" package="LED-0603" value="Green" x="43.18" y="31.75" rot="R270"/>
-<element name="R51" library="SparkFun-Resistors" package="0402-RES" value="200" x="43.18" y="30.1625" rot="R180"/>
-<element name="D28" library="SparkFun-LED" package="LED-0603" value="Green" x="34.29" y="31.75" rot="R270"/>
-<element name="R52" library="SparkFun-Resistors" package="0402-RES" value="200" x="34.29" y="30.1625" rot="R180"/>
-<element name="D29" library="SparkFun-LED" package="LED-0603" value="Green" x="25.4" y="31.75" rot="R270"/>
-<element name="R53" library="SparkFun-Resistors" package="0402-RES" value="200" x="25.4" y="30.1625" rot="R180"/>
-<element name="D30" library="SparkFun-LED" package="LED-0603" value="Green" x="16.51" y="31.75" rot="R270"/>
-<element name="R54" library="SparkFun-Resistors" package="0402-RES" value="200" x="16.51" y="30.1625" rot="R180"/>
-<element name="Q6" library="SparkFun-DiscreteSemi" package="SOT23-3" value="5.8A/30V/35mΩ" x="81.915" y="18.7325">
+<element name="J112" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="16.51" y="8.255" rot="R180"/>
+<element name="J113" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="25.4" y="8.255" rot="R180"/>
+<element name="J116" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="34.29" y="8.255" rot="R180"/>
+<element name="J117" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="43.18" y="8.255" rot="R180"/>
+<element name="J114" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="52.07" y="8.255" rot="R180"/>
+<element name="J115" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="60.96" y="8.255" rot="R180"/>
+<element name="J118" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="69.85" y="8.255" rot="R180"/>
+<element name="J119" library="Protofusion" package="JST-PA-2" value="JST-PA-2PTH" x="78.74" y="8.255" rot="R180"/>
+<element name="J101" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="78.74" y="36.195"/>
+<element name="J102" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="69.85" y="36.195"/>
+<element name="J105" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="60.96" y="36.195"/>
+<element name="J106" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="52.07" y="36.195"/>
+<element name="J103" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="43.18" y="36.195"/>
+<element name="J104" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="34.29" y="36.195"/>
+<element name="J107" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="25.4" y="36.195"/>
+<element name="J108" library="Protofusion" package="JST-PA-3" value="JST-PA-3PTH" x="16.51" y="36.195"/>
+<element name="D215" library="SparkFun-LED" package="LED-0603" value="Green" x="78.74" y="31.75" rot="R270"/>
+<element name="R215" library="SparkFun-Resistors" package="0402-RES" value="200" x="78.74" y="30.1625" rot="R180"/>
+<element name="D216" library="SparkFun-LED" package="LED-0603" value="Green" x="69.85" y="31.75" rot="R270"/>
+<element name="R216" library="SparkFun-Resistors" package="0402-RES" value="200" x="69.85" y="30.1625" rot="R180"/>
+<element name="D217" library="SparkFun-LED" package="LED-0603" value="Green" x="60.96" y="31.75" rot="R270"/>
+<element name="R217" library="SparkFun-Resistors" package="0402-RES" value="200" x="60.96" y="30.1625" rot="R180"/>
+<element name="D218" library="SparkFun-LED" package="LED-0603" value="Green" x="52.07" y="31.75" rot="R270"/>
+<element name="R218" library="SparkFun-Resistors" package="0402-RES" value="200" x="52.07" y="30.1625" rot="R180"/>
+<element name="D219" library="SparkFun-LED" package="LED-0603" value="Green" x="43.18" y="31.75" rot="R270"/>
+<element name="R219" library="SparkFun-Resistors" package="0402-RES" value="200" x="43.18" y="30.1625" rot="R180"/>
+<element name="D220" library="SparkFun-LED" package="LED-0603" value="Green" x="34.29" y="31.75" rot="R270"/>
+<element name="R220" library="SparkFun-Resistors" package="0402-RES" value="200" x="34.29" y="30.1625" rot="R180"/>
+<element name="D221" library="SparkFun-LED" package="LED-0603" value="Green" x="25.4" y="31.75" rot="R270"/>
+<element name="R221" library="SparkFun-Resistors" package="0402-RES" value="200" x="25.4" y="30.1625" rot="R180"/>
+<element name="D222" library="SparkFun-LED" package="LED-0603" value="Green" x="16.51" y="31.75" rot="R270"/>
+<element name="R222" library="SparkFun-Resistors" package="0402-RES" value="200" x="16.51" y="30.1625" rot="R180"/>
+<element name="Q202" library="SparkFun-DiscreteSemi" package="SOT23-3" value="5.8A/30V/35mΩ" x="81.915" y="18.7325">
 <attribute name="PROD_ID" value="TRANS-12988" x="81.915" y="18.7325" size="1.778" layer="27" display="off"/>
 </element>
-<element name="R55" library="SparkFun-Resistors" package="0402-RES" value="100K" x="81.915" y="16.1925" rot="R180"/>
-<element name="FRAME1" library="SparkFun-Aesthetics" package="CREATIVE_COMMONS" value="FRAME-LEDGER" x="0" y="0"/>
+<element name="R223" library="SparkFun-Resistors" package="0402-RES" value="100K" x="81.915" y="16.1925" rot="R180"/>
+<element name="FRAME201" library="SparkFun-Aesthetics" package="CREATIVE_COMMONS" value="FRAME-LEDGER" x="0" y="0"/>
 </elements>
 <signals>
 <signal name="3.3V">
-<contactref element="U3" pad="PIN3"/>
-<contactref element="C14" pad="1"/>
-<contactref element="U3" pad="PIN5"/>
-<contactref element="L1" pad="2"/>
-<contactref element="D7" pad="A"/>
-<contactref element="C12" pad="1"/>
-<contactref element="C11" pad="2"/>
-<contactref element="R18" pad="2"/>
-<contactref element="J7" pad="1"/>
-<contactref element="U2" pad="1"/>
-<contactref element="U2" pad="5"/>
-<contactref element="C13" pad="1"/>
-<contactref element="U2" pad="17"/>
-<contactref element="OK1" pad="16"/>
-<contactref element="OK1" pad="14"/>
-<contactref element="OK1" pad="12"/>
-<contactref element="OK1" pad="10"/>
-<contactref element="C5" pad="2"/>
-<contactref element="C7" pad="2"/>
-<contactref element="OK2" pad="16"/>
-<contactref element="OK2" pad="14"/>
-<contactref element="OK2" pad="12"/>
-<contactref element="OK2" pad="10"/>
+<contactref element="U203" pad="PIN3"/>
+<contactref element="C210" pad="1"/>
+<contactref element="U203" pad="PIN5"/>
+<contactref element="L201" pad="2"/>
+<contactref element="D203" pad="A"/>
+<contactref element="C208" pad="1"/>
+<contactref element="C207" pad="2"/>
+<contactref element="R202" pad="2"/>
+<contactref element="J111" pad="1"/>
+<contactref element="U202" pad="1"/>
+<contactref element="U202" pad="5"/>
+<contactref element="C209" pad="1"/>
+<contactref element="U202" pad="17"/>
+<contactref element="U102" pad="16"/>
+<contactref element="U102" pad="14"/>
+<contactref element="U102" pad="12"/>
+<contactref element="U102" pad="10"/>
+<contactref element="C201" pad="2"/>
+<contactref element="C203" pad="2"/>
+<contactref element="U103" pad="16"/>
+<contactref element="U103" pad="14"/>
+<contactref element="U103" pad="12"/>
+<contactref element="U103" pad="10"/>
 <wire x1="18.0975" y1="18.7325" x2="19.9875" y2="18.7325" width="0.254" layer="1"/>
 <wire x1="19.9875" y1="18.7325" x2="20.0025" y2="18.7475" width="0.254" layer="1"/>
 <wire x1="56.17" y1="19.425" x2="57.0925" y2="19.425" width="0.254" layer="1"/>
@@ -4729,14 +4760,10 @@ Please make sure your boards conform to 
 <via x="36.195" y="20.0025" extent="1-16" drill="0.3048" diameter="0.254"/>
 <wire x1="14.9225" y1="20.0025" x2="15.5575" y2="19.3675" width="0.4064" layer="1"/>
 <via x="15.5575" y="19.3675" extent="1-16" drill="0.3048" diameter="0.254"/>
-<wire x1="30.00375" y1="27.94" x2="30.00375" y2="19.3675" width="0.4064" layer="16"/>
-<wire x1="30.00375" y1="19.3675" x2="15.5575" y2="19.3675" width="0.4064" layer="16"/>
-<wire x1="30.00375" y1="19.3675" x2="32.0675" y2="19.3675" width="0.254" layer="16"/>
-<wire x1="32.0675" y1="19.3675" x2="32.7025" y2="20.0025" width="0.254" layer="16"/>
-<wire x1="32.7025" y1="20.0025" x2="33.655" y2="20.0025" width="0.254" layer="16"/>
+<wire x1="30.00375" y1="27.94" x2="30.00375" y2="20.0025" width="0.4064" layer="16"/>
 <wire x1="57.4825" y1="19.035" x2="57.4825" y2="17.78" width="0.254" layer="1"/>
-<wire x1="86.36" y1="12.7" x2="85.09" y2="12.7" width="0.254" layer="1"/>
-<via x="85.09" y="12.7" extent="1-16" drill="0.3048"/>
+<wire x1="86.36" y1="12.3825" x2="85.24875" y2="12.3825" width="0.254" layer="1"/>
+<via x="85.24875" y="12.3825" extent="1-16" drill="0.3048"/>
 <wire x1="29.95125" y1="27.8875" x2="30.00375" y2="27.94" width="0.4064" layer="1"/>
 <wire x1="54.6925" y1="22.625" x2="54.6925" y2="22.61875" width="0.254" layer="1"/>
 <wire x1="54.6925" y1="22.61875" x2="54.76875" y2="22.5425" width="0.254" layer="1"/>
@@ -4758,97 +4785,100 @@ Please make sure your boards conform to 
 <wire x1="58.7375" y1="24.13" x2="57.94375" y2="23.33625" width="0.254" layer="1"/>
 <wire x1="78.74" y1="20.0025" x2="80.3275" y2="20.0025" width="0.254" layer="16"/>
 <wire x1="80.3275" y1="20.0025" x2="81.28" y2="19.05" width="0.254" layer="16"/>
-<wire x1="81.28" y1="19.05" x2="81.28" y2="16.51" width="0.254" layer="16"/>
-<wire x1="81.28" y1="16.51" x2="85.09" y2="12.7" width="0.254" layer="16"/>
+<wire x1="81.28" y1="19.05" x2="81.28" y2="16.35125" width="0.254" layer="16"/>
+<wire x1="81.28" y1="16.35125" x2="85.24875" y2="12.3825" width="0.254" layer="16"/>
+<wire x1="30.00375" y1="20.0025" x2="16.1925" y2="20.0025" width="0.4064" layer="16"/>
+<wire x1="16.1925" y1="20.0025" x2="15.5575" y2="19.3675" width="0.4064" layer="16"/>
+<wire x1="33.655" y1="20.0025" x2="30.00375" y2="20.0025" width="0.254" layer="16"/>
 </signal>
 <signal name="GND">
-<contactref element="U3" pad="PIN2"/>
-<contactref element="C14" pad="2"/>
-<contactref element="D8" pad="C"/>
-<contactref element="D9" pad="C"/>
-<contactref element="D10" pad="C"/>
-<contactref element="U3" pad="PIN8"/>
-<contactref element="C9" pad="2"/>
-<contactref element="U11" pad="2"/>
-<contactref element="R17" pad="1"/>
-<contactref element="D6" pad="A"/>
-<contactref element="R19" pad="2"/>
-<contactref element="C11" pad="1"/>
-<contactref element="C12" pad="2"/>
-<contactref element="Q1" pad="S1"/>
-<contactref element="R11" pad="1"/>
-<contactref element="R12" pad="1"/>
-<contactref element="R15" pad="1"/>
-<contactref element="R16" pad="1"/>
-<contactref element="J7" pad="2"/>
-<contactref element="U2" pad="16"/>
-<contactref element="U2" pad="32"/>
-<contactref element="C13" pad="2"/>
-<contactref element="C6" pad="1"/>
-<contactref element="C8" pad="2"/>
-<contactref element="Y1" pad="2"/>
-<contactref element="Y1" pad="4"/>
-<contactref element="OK1" pad="2"/>
-<contactref element="R3" pad="2"/>
-<contactref element="C1" pad="2"/>
-<contactref element="R4" pad="2"/>
-<contactref element="C2" pad="2"/>
-<contactref element="OK1" pad="4"/>
-<contactref element="R7" pad="2"/>
-<contactref element="C3" pad="2"/>
-<contactref element="OK1" pad="6"/>
-<contactref element="R8" pad="2"/>
-<contactref element="C4" pad="2"/>
-<contactref element="OK1" pad="8"/>
-<contactref element="C5" pad="1"/>
-<contactref element="C7" pad="1"/>
-<contactref element="Q1" pad="S2"/>
-<contactref element="Q2" pad="S1"/>
-<contactref element="Q2" pad="S2"/>
+<contactref element="U203" pad="PIN2"/>
+<contactref element="C210" pad="2"/>
+<contactref element="D204" pad="C"/>
+<contactref element="D205" pad="C"/>
+<contactref element="D206" pad="C"/>
+<contactref element="U203" pad="PIN8"/>
+<contactref element="C205" pad="2"/>
+<contactref element="U201" pad="2"/>
+<contactref element="R201" pad="1"/>
+<contactref element="D202" pad="A"/>
+<contactref element="R203" pad="2"/>
+<contactref element="C207" pad="1"/>
+<contactref element="C208" pad="2"/>
+<contactref element="Q101" pad="S1"/>
+<contactref element="R121" pad="1"/>
+<contactref element="R122" pad="1"/>
+<contactref element="R129" pad="1"/>
+<contactref element="R130" pad="1"/>
+<contactref element="J111" pad="2"/>
+<contactref element="U202" pad="16"/>
+<contactref element="U202" pad="32"/>
+<contactref element="C209" pad="2"/>
+<contactref element="C202" pad="1"/>
+<contactref element="C204" pad="2"/>
+<contactref element="Y201" pad="2"/>
+<contactref element="Y201" pad="4"/>
+<contactref element="U102" pad="2"/>
+<contactref element="R105" pad="2"/>
+<contactref element="C101" pad="2"/>
+<contactref element="R106" pad="2"/>
+<contactref element="C102" pad="2"/>
+<contactref element="U102" pad="4"/>
+<contactref element="R113" pad="2"/>
+<contactref element="C105" pad="2"/>
+<contactref element="U102" pad="6"/>
+<contactref element="R114" pad="2"/>
+<contactref element="C106" pad="2"/>
+<contactref element="U102" pad="8"/>
+<contactref element="C201" pad="1"/>
+<contactref element="C203" pad="1"/>
+<contactref element="Q101" pad="S2"/>
+<contactref element="Q103" pad="S1"/>
+<contactref element="Q103" pad="S2"/>
 <polygon width="0.254" layer="1">
-<vertex x="-0.9525" y="51.1175"/>
-<vertex x="89.535" y="51.1175"/>
-<vertex x="89.535" y="-0.3175"/>
-<vertex x="-0.9525" y="-0.3175"/>
+<vertex x="-0.635" y="45.085"/>
+<vertex x="89.535" y="45.085"/>
+<vertex x="89.535" y="-0.635"/>
+<vertex x="-0.635" y="-0.635"/>
 </polygon>
 <polygon width="0.254" layer="16">
-<vertex x="90.32875" y="51.7525"/>
-<vertex x="90.01125" y="-1.190625"/>
-<vertex x="-1.031875" y="-1.190625"/>
-<vertex x="-0.714375" y="51.7525"/>
+<vertex x="90.17" y="45.72"/>
+<vertex x="90.17" y="-1.27"/>
+<vertex x="-1.27" y="-1.27"/>
+<vertex x="-1.27" y="45.72"/>
 </polygon>
-<contactref element="J12" pad="4"/>
-<contactref element="J13" pad="4"/>
-<contactref element="OK2" pad="2"/>
-<contactref element="R32" pad="2"/>
-<contactref element="C15" pad="2"/>
-<contactref element="OK2" pad="4"/>
-<contactref element="R34" pad="2"/>
-<contactref element="C16" pad="2"/>
-<contactref element="OK2" pad="6"/>
-<contactref element="R36" pad="2"/>
-<contactref element="C17" pad="2"/>
-<contactref element="OK2" pad="8"/>
-<contactref element="R38" pad="2"/>
-<contactref element="C18" pad="2"/>
-<contactref element="Q4" pad="S1"/>
-<contactref element="R40" pad="1"/>
-<contactref element="R42" pad="1"/>
-<contactref element="Q4" pad="S2"/>
-<contactref element="R44" pad="1"/>
-<contactref element="Q5" pad="S1"/>
-<contactref element="R46" pad="1"/>
-<contactref element="Q5" pad="S2"/>
-<contactref element="J1" pad="1"/>
-<contactref element="J2" pad="1"/>
-<contactref element="J3" pad="1"/>
-<contactref element="J4" pad="1"/>
-<contactref element="J5" pad="1"/>
-<contactref element="J6" pad="1"/>
-<contactref element="J14" pad="1"/>
-<contactref element="J15" pad="1"/>
-<contactref element="Q6" pad="2"/>
-<contactref element="R55" pad="1"/>
+<contactref element="J109" pad="4"/>
+<contactref element="J110" pad="4"/>
+<contactref element="U103" pad="2"/>
+<contactref element="R107" pad="2"/>
+<contactref element="C103" pad="2"/>
+<contactref element="U103" pad="4"/>
+<contactref element="R108" pad="2"/>
+<contactref element="C104" pad="2"/>
+<contactref element="U103" pad="6"/>
+<contactref element="R115" pad="2"/>
+<contactref element="C107" pad="2"/>
+<contactref element="U103" pad="8"/>
+<contactref element="R116" pad="2"/>
+<contactref element="C108" pad="2"/>
+<contactref element="Q102" pad="S1"/>
+<contactref element="R123" pad="1"/>
+<contactref element="R124" pad="1"/>
+<contactref element="Q102" pad="S2"/>
+<contactref element="R131" pad="1"/>
+<contactref element="Q104" pad="S1"/>
+<contactref element="R132" pad="1"/>
+<contactref element="Q104" pad="S2"/>
+<contactref element="J101" pad="1"/>
+<contactref element="J102" pad="1"/>
+<contactref element="J105" pad="1"/>
+<contactref element="J106" pad="1"/>
+<contactref element="J103" pad="1"/>
+<contactref element="J104" pad="1"/>
+<contactref element="J107" pad="1"/>
+<contactref element="J108" pad="1"/>
+<contactref element="Q202" pad="2"/>
+<contactref element="R223" pad="1"/>
 <via x="18.57375" y="9.2075" extent="1-16" drill="0.3048"/>
 <via x="19.3675" y="9.2075" extent="1-16" drill="0.3048"/>
 <via x="22.5425" y="11.1125" extent="1-16" drill="0.3048"/>
@@ -4873,94 +4903,93 @@ Please make sure your boards conform to 
 <wire x1="60.6575" y1="21.69625" x2="60.38125" y2="21.42" width="0.254" layer="1"/>
 <via x="78.58125" y="15.08125" extent="1-16" drill="0.3048"/>
 <via x="69.215" y="20.0025" extent="1-16" drill="0.3048"/>
-<via x="1.27" y="20.955" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="38.735" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="5.08" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="36.195" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="33.655" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="31.115" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="28.575" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="26.035" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="23.495" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="18.415" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="15.875" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="13.335" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="10.795" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="8.255" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="1.27" y="5.715" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="7.62" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="10.16" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="7.62" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="10.16" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="12.7" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="15.24" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="17.78" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="20.32" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="22.86" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="25.4" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="27.94" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="30.48" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="33.02" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="35.56" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="38.1" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="40.64" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="43.18" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="45.72" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="48.26" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="50.8" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="53.34" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="55.88" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="58.42" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="60.96" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="63.5" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="66.04" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="68.58" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="71.12" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="73.66" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="76.2" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="78.74" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="81.28" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="83.82" y="43.18" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="38.735" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="36.195" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="33.655" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="31.115" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="26.035" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="18.415" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="13.335" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="5.715" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="10.795" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="87.63" y="8.255" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="83.82" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="81.28" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="78.74" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="76.2" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="73.66" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="71.12" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="68.58" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="66.04" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="63.5" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="60.96" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="58.42" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="55.88" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="53.34" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="50.8" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="48.26" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="45.72" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="43.18" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="40.64" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="38.1" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="35.56" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="33.02" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="30.48" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="27.94" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="25.4" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="22.86" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="20.32" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="17.78" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="15.24" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="12.7" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
-<via x="5.08" y="1.27" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="19.685" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="37.465" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="6.985" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="34.925" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="32.385" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="29.845" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="27.305" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="24.765" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="22.225" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="17.145" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="14.605" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="12.065" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="9.525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="6.985" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="4.445" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="6.985" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="9.525" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="9.525" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="12.065" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="14.605" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="17.145" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="19.685" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="22.225" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="24.765" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="27.305" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="29.845" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="32.385" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="34.925" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="37.465" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="40.005" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="42.545" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="45.085" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="47.625" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="50.165" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="52.705" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="55.245" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="57.785" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="60.325" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="62.865" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="65.405" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="67.945" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="70.485" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="73.025" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="75.565" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="78.105" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="80.645" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="83.185" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="86.995" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="37.465" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="34.925" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="32.385" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="30.1625" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="25.0825" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="20.0025" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="12.3825" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="4.7625" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="9.8425" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="7.3025" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="83.185" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="80.645" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="78.105" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="75.565" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="73.025" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="70.485" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="67.945" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="65.405" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="62.865" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="60.325" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="57.785" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="55.245" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="52.705" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="50.165" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="47.625" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="45.085" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="42.545" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="40.005" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="37.465" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="34.925" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="32.385" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="29.845" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="27.305" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="24.765" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="22.225" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="19.685" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="17.145" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="14.605" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="12.065" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
 <via x="49.37125" y="20.955" extent="1-16" drill="0.3048"/>
 <via x="50.95875" y="24.28875" extent="1-16" drill="0.3048"/>
 <via x="53.0225" y="22.06625" extent="1-16" drill="0.3048"/>
@@ -4981,7 +5010,7 @@ Please make sure your boards conform to 
 <via x="21.11375" y="17.4625" extent="1-16" drill="0.3048"/>
 <via x="16.8275" y="17.4625" extent="1-16" drill="0.3048"/>
 <via x="15.71625" y="22.225" extent="1-16" drill="0.3048"/>
-<via x="15.71625" y="20.32" extent="1-16" drill="0.3048"/>
+<via x="15.875" y="20.6375" extent="1-16" drill="0.3048"/>
 <via x="21.43125" y="20.79625" extent="1-16" drill="0.3048"/>
 <via x="21.59" y="23.01875" extent="1-16" drill="0.3048"/>
 <via x="17.78" y="22.225" extent="1-16" drill="0.3048"/>
@@ -5053,9 +5082,8 @@ Please make sure your boards conform to 
 <via x="60.80125" y="5.23875" extent="1-16" drill="0.3048"/>
 <via x="69.69125" y="5.23875" extent="1-16" drill="0.3048"/>
 <via x="77.31125" y="5.23875" extent="1-16" drill="0.3048"/>
-<via x="22.225" y="18.57375" extent="1-16" drill="0.3048"/>
+<via x="22.939375" y="19.288125" extent="1-16" drill="0.3048"/>
 <via x="5.87375" y="14.9225" extent="1-16" drill="0.3048"/>
-<via x="5.87375" y="20.0025" extent="1-16" drill="0.3048"/>
 <via x="4.60375" y="26.19375" extent="1-16" drill="0.3048"/>
 <via x="4.7625" y="31.90875" extent="1-16" drill="0.3048"/>
 <via x="11.7475" y="32.0675" extent="1-16" drill="0.3048"/>
@@ -5100,18 +5128,35 @@ Please make sure your boards conform to 
 <via x="66.51625" y="13.49375" extent="1-16" drill="0.3048"/>
 <via x="16.03375" y="27.14625" extent="1-16" drill="0.3048"/>
 <via x="13.81125" y="39.52875" extent="1-16" drill="0.3048"/>
-<via x="20.955" y="39.52875" extent="1-16" drill="0.3048"/>
-<via x="29.845" y="39.52875" extent="1-16" drill="0.3048"/>
-<via x="38.735" y="39.52875" extent="1-16" drill="0.3048"/>
-<via x="47.625" y="39.52875" extent="1-16" drill="0.3048"/>
-<via x="56.515" y="39.52875" extent="1-16" drill="0.3048"/>
-<via x="65.405" y="39.52875" extent="1-16" drill="0.3048"/>
-<via x="74.295" y="39.52875" extent="1-16" drill="0.3048"/>
+<via x="19.685" y="39.52875" extent="1-16" drill="0.3048"/>
+<via x="28.575" y="39.52875" extent="1-16" drill="0.3048"/>
+<via x="37.465" y="39.52875" extent="1-16" drill="0.3048"/>
+<via x="46.355" y="39.52875" extent="1-16" drill="0.3048"/>
+<via x="55.245" y="39.52875" extent="1-16" drill="0.3048"/>
+<via x="64.135" y="39.52875" extent="1-16" drill="0.3048"/>
+<via x="73.025" y="39.52875" extent="1-16" drill="0.3048"/>
+<via x="0.9525" y="40.005" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="1.905" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="1.905" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="4.445" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="0.9525" y="42.545" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="1.905" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="4.445" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="42.545" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="40.005" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="1.905" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="86.995" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="14.9225" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="17.4625" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="22.5425" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="87.9475" y="27.6225" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="85.09" y="43.4975" extent="1-16" drill="0.3048" diameter="0.254"/>
+<via x="85.09" y="0.9525" extent="1-16" drill="0.3048" diameter="0.254"/>
 </signal>
 <signal name="CAN_H">
-<contactref element="U3" pad="PIN7"/>
-<contactref element="J12" pad="2"/>
-<contactref element="J13" pad="2"/>
+<contactref element="U203" pad="PIN7"/>
+<contactref element="J109" pad="2"/>
+<contactref element="J110" pad="2"/>
 <wire x1="13.0175" y1="17.4625" x2="11.7475" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="11.7475" y1="17.4625" x2="10.16" y2="15.875" width="0.254" layer="1"/>
 <wire x1="10.16" y1="15.875" x2="8.3025" y2="15.875" width="0.254" layer="1"/>
@@ -5124,9 +5169,9 @@ Please make sure your boards conform to 
 <wire x1="8.3025" y1="15.875" x2="8.255" y2="15.8275" width="0.254" layer="16"/>
 </signal>
 <signal name="CAN_L">
-<contactref element="U3" pad="PIN6"/>
-<contactref element="J12" pad="3"/>
-<contactref element="J13" pad="3"/>
+<contactref element="U203" pad="PIN6"/>
+<contactref element="J109" pad="3"/>
+<contactref element="J110" pad="3"/>
 <wire x1="13.0175" y1="18.7325" x2="11.1125" y2="18.7325" width="0.254" layer="1"/>
 <wire x1="11.1125" y1="18.7325" x2="10.16" y2="17.78" width="0.254" layer="1"/>
 <wire x1="10.16" y1="17.78" x2="8.3025" y2="17.78" width="0.254" layer="1"/>
@@ -5137,8 +5182,8 @@ Please make sure your boards conform to 
 <wire x1="8.3025" y1="28.575" x2="8.255" y2="28.6225" width="0.254" layer="1"/>
 </signal>
 <signal name="LED1">
-<contactref element="R20" pad="1"/>
-<contactref element="U2" pad="20"/>
+<contactref element="R204" pad="1"/>
+<contactref element="U202" pad="20"/>
 <wire x1="47.97" y1="22.625" x2="46.74875" y2="22.625" width="0.254" layer="1"/>
 <wire x1="46.74875" y1="22.625" x2="44.92625" y2="24.4475" width="0.254" layer="1"/>
 <wire x1="44.92625" y1="24.4475" x2="44.92625" y2="30.63875" width="0.254" layer="1"/>
@@ -5152,8 +5197,8 @@ Please make sure your boards conform to 
 <wire x1="85.4075" y1="29.5275" x2="85.4075" y2="28.52" width="0.254" layer="1"/>
 </signal>
 <signal name="LED2">
-<contactref element="R21" pad="1"/>
-<contactref element="U2" pad="19"/>
+<contactref element="R205" pad="1"/>
+<contactref element="U202" pad="19"/>
 <wire x1="47.97" y1="23.425" x2="46.7425" y2="23.425" width="0.254" layer="1"/>
 <wire x1="46.7425" y1="23.425" x2="45.4025" y2="24.765" width="0.254" layer="1"/>
 <wire x1="45.4025" y1="24.765" x2="45.4025" y2="29.845" width="0.254" layer="1"/>
@@ -5169,8 +5214,8 @@ Please make sure your boards conform to 
 <wire x1="85.4075" y1="23.8125" x2="85.4075" y2="22.805" width="0.254" layer="1"/>
 </signal>
 <signal name="LED3">
-<contactref element="R22" pad="1"/>
-<contactref element="U2" pad="18"/>
+<contactref element="R206" pad="1"/>
+<contactref element="U202" pad="18"/>
 <wire x1="47.97" y1="24.225" x2="46.73625" y2="24.225" width="0.254" layer="1"/>
 <wire x1="46.73625" y1="24.225" x2="45.87875" y2="25.0825" width="0.254" layer="1"/>
 <wire x1="45.87875" y1="25.0825" x2="45.87875" y2="29.05125" width="0.254" layer="1"/>
@@ -5186,8 +5231,8 @@ Please make sure your boards conform to 
 <wire x1="85.4075" y1="18.0975" x2="85.4075" y2="17.09" width="0.254" layer="1"/>
 </signal>
 <signal name="CAN_TX">
-<contactref element="U3" pad="PIN1"/>
-<contactref element="U2" pad="22"/>
+<contactref element="U203" pad="PIN1"/>
+<contactref element="U202" pad="22"/>
 <wire x1="18.0975" y1="16.1925" x2="20.79625" y2="16.1925" width="0.254" layer="1"/>
 <wire x1="20.79625" y1="16.1925" x2="24.13" y2="19.52625" width="0.254" layer="1"/>
 <wire x1="24.13" y1="19.52625" x2="30.63875" y2="19.52625" width="0.254" layer="1"/>
@@ -5201,8 +5246,8 @@ Please make sure your boards conform to 
 <wire x1="46.0375" y1="21.2725" x2="46.355" y2="20.955" width="0.254" layer="16"/>
 </signal>
 <signal name="CAN_RX">
-<contactref element="U3" pad="PIN4"/>
-<contactref element="U2" pad="21"/>
+<contactref element="U203" pad="PIN4"/>
+<contactref element="U202" pad="21"/>
 <wire x1="18.0975" y1="20.0025" x2="30.1625" y2="20.0025" width="0.254" layer="1"/>
 <wire x1="30.1625" y1="20.0025" x2="32.0675" y2="21.9075" width="0.254" layer="1"/>
 <via x="32.0675" y="21.9075" extent="1-16" drill="0.3048" diameter="0.254"/>
@@ -5212,9 +5257,9 @@ Please make sure your boards conform to 
 <wire x1="46.4375" y1="21.825" x2="46.355" y2="21.9075" width="0.254" layer="1"/>
 </signal>
 <signal name="OSC_IN">
-<contactref element="U2" pad="2"/>
-<contactref element="Y1" pad="1"/>
-<contactref element="C6" pad="2"/>
+<contactref element="U202" pad="2"/>
+<contactref element="Y201" pad="1"/>
+<contactref element="C202" pad="2"/>
 <wire x1="56.17" y1="20.225" x2="56.265" y2="20.32" width="0.254" layer="1"/>
 <wire x1="56.265" y1="20.32" x2="60.16625" y2="20.32" width="0.254" layer="1"/>
 <wire x1="60.16625" y1="20.32" x2="60.38125" y2="20.105" width="0.254" layer="1"/>
@@ -5223,9 +5268,9 @@ Please make sure your boards conform to 
 <wire x1="60.6575" y1="18.94375" x2="60.38125" y2="19.22" width="0.254" layer="1"/>
 </signal>
 <signal name="OSC_OUT">
-<contactref element="U2" pad="3"/>
-<contactref element="Y1" pad="3"/>
-<contactref element="C8" pad="1"/>
+<contactref element="U202" pad="3"/>
+<contactref element="Y201" pad="3"/>
+<contactref element="C204" pad="1"/>
 <wire x1="56.17" y1="21.025" x2="58.28625" y2="21.025" width="0.254" layer="1"/>
 <wire x1="58.28625" y1="21.025" x2="58.68125" y2="21.42" width="0.254" layer="1"/>
 <wire x1="59.3575" y1="22.86" x2="59.3575" y2="22.68625" width="0.254" layer="1"/>
@@ -5235,8 +5280,8 @@ Please make sure your boards conform to 
 <wire x1="59.055" y1="22.5575" x2="59.055" y2="21.79375" width="0.254" layer="1"/>
 </signal>
 <signal name="SWCLK">
-<contactref element="J7" pad="3"/>
-<contactref element="U2" pad="24"/>
+<contactref element="J111" pad="3"/>
+<contactref element="U202" pad="24"/>
 <wire x1="47.97" y1="19.425" x2="50.38125" y2="19.425" width="0.254" layer="1"/>
 <wire x1="50.38125" y1="19.425" x2="50.95875" y2="20.0025" width="0.254" layer="1"/>
 <wire x1="50.95875" y1="20.0025" x2="52.86375" y2="20.0025" width="0.254" layer="1"/>
@@ -5251,13 +5296,13 @@ Please make sure your boards conform to 
 <wire x1="81.915" y1="16.8275" x2="85.09" y2="13.6525" width="0.254" layer="16"/>
 <via x="85.09" y="13.6525" extent="1-16" drill="0.3048"/>
 <wire x1="85.09" y1="13.6525" x2="84.455" y2="13.0175" width="0.254" layer="1"/>
-<wire x1="84.455" y1="13.0175" x2="84.455" y2="10.95375" width="0.254" layer="1"/>
-<wire x1="84.455" y1="10.95375" x2="85.24875" y2="10.16" width="0.254" layer="1"/>
-<wire x1="85.24875" y1="10.16" x2="86.36" y2="10.16" width="0.254" layer="1"/>
+<wire x1="84.455" y1="13.0175" x2="84.455" y2="10.63625" width="0.254" layer="1"/>
+<wire x1="84.455" y1="10.63625" x2="85.24875" y2="9.8425" width="0.254" layer="1"/>
+<wire x1="85.24875" y1="9.8425" x2="86.36" y2="9.8425" width="0.254" layer="1"/>
 </signal>
 <signal name="SWDIO">
-<contactref element="J7" pad="4"/>
-<contactref element="U2" pad="23"/>
+<contactref element="J111" pad="4"/>
+<contactref element="U202" pad="23"/>
 <wire x1="47.97" y1="20.225" x2="50.3875" y2="20.225" width="0.254" layer="1"/>
 <wire x1="50.3875" y1="20.225" x2="50.64125" y2="20.47875" width="0.254" layer="1"/>
 <wire x1="50.64125" y1="20.47875" x2="52.3875" y2="20.47875" width="0.254" layer="1"/>
@@ -5272,30 +5317,30 @@ Please make sure your boards conform to 
 <wire x1="82.55" y1="17.145" x2="85.09" y2="14.605" width="0.254" layer="16"/>
 <via x="85.09" y="14.605" extent="1-16" drill="0.3048"/>
 <wire x1="85.09" y1="14.605" x2="83.97875" y2="13.49375" width="0.254" layer="1"/>
-<wire x1="83.97875" y1="13.49375" x2="83.97875" y2="10.63625" width="0.254" layer="1"/>
-<wire x1="83.97875" y1="10.63625" x2="85.725" y2="8.89" width="0.254" layer="1"/>
-<wire x1="85.725" y1="8.89" x2="86.36" y2="8.89" width="0.254" layer="1"/>
+<wire x1="83.97875" y1="13.49375" x2="83.97875" y2="10.31875" width="0.254" layer="1"/>
+<wire x1="83.97875" y1="10.31875" x2="85.725" y2="8.5725" width="0.254" layer="1"/>
+<wire x1="85.725" y1="8.5725" x2="86.36" y2="8.5725" width="0.254" layer="1"/>
 </signal>
 <signal name="VIN">
-<contactref element="Q3" pad="3"/>
-<contactref element="D1" pad="C"/>
-<contactref element="D2" pad="C"/>
-<contactref element="D3" pad="C"/>
-<contactref element="D4" pad="C"/>
-<contactref element="J12" pad="1"/>
-<contactref element="J13" pad="1"/>
-<contactref element="D19" pad="C"/>
-<contactref element="D20" pad="C"/>
-<contactref element="D21" pad="C"/>
-<contactref element="D22" pad="C"/>
-<contactref element="J8" pad="1"/>
-<contactref element="J9" pad="1"/>
-<contactref element="J10" pad="1"/>
-<contactref element="J11" pad="1"/>
-<contactref element="J16" pad="1"/>
-<contactref element="J17" pad="1"/>
-<contactref element="J18" pad="1"/>
-<contactref element="J19" pad="1"/>
+<contactref element="Q201" pad="3"/>
+<contactref element="D101" pad="C"/>
+<contactref element="D102" pad="C"/>
+<contactref element="D105" pad="C"/>
+<contactref element="D106" pad="C"/>
+<contactref element="J109" pad="1"/>
+<contactref element="J110" pad="1"/>
+<contactref element="D103" pad="C"/>
+<contactref element="D104" pad="C"/>
+<contactref element="D107" pad="C"/>
+<contactref element="D108" pad="C"/>
+<contactref element="J112" pad="1"/>
+<contactref element="J113" pad="1"/>
+<contactref element="J116" pad="1"/>
+<contactref element="J117" pad="1"/>
+<contactref element="J114" pad="1"/>
+<contactref element="J115" pad="1"/>
+<contactref element="J118" pad="1"/>
+<contactref element="J119" pad="1"/>
 <wire x1="8.255" y1="13.8275" x2="8.255" y2="7.9375" width="1.778" layer="16"/>
 <wire x1="8.255" y1="7.9375" x2="12.3825" y2="3.81" width="1.778" layer="16"/>
 <wire x1="12.3825" y1="3.81" x2="17.4625" y2="3.81" width="1.778" layer="16"/>
@@ -5362,9 +5407,9 @@ Please make sure your boards conform to 
 <wire x1="14.27625" y1="27.14625" x2="14.2875" y2="27.135" width="1.016" layer="1"/>
 </signal>
 <signal name="OUTPUT1">
-<contactref element="R9" pad="1"/>
-<contactref element="R23" pad="1"/>
-<contactref element="U2" pad="6"/>
+<contactref element="R117" pad="1"/>
+<contactref element="R207" pad="1"/>
+<contactref element="U202" pad="6"/>
 <wire x1="20.375" y1="6.35" x2="20.375" y2="5.4525" width="0.254" layer="1"/>
 <wire x1="20.375" y1="5.4525" x2="20.32" y2="5.3975" width="0.254" layer="1"/>
 <via x="20.32" y="5.3975" extent="1-16" drill="0.3048" diameter="0.254"/>
@@ -5393,9 +5438,9 @@ Please make sure your boards conform to 
 <wire x1="55.5625" y1="14.76375" x2="63.1825" y2="22.38375" width="0.254" layer="16"/>
 </signal>
 <signal name="N$18">
-<contactref element="R18" pad="1"/>
-<contactref element="R19" pad="1"/>
-<contactref element="U11" pad="3"/>
+<contactref element="R202" pad="1"/>
+<contactref element="R203" pad="1"/>
+<contactref element="U201" pad="3"/>
 <wire x1="17.145" y1="23.8675" x2="18.4325" y2="23.8675" width="0.254" layer="1"/>
 <wire x1="18.4325" y1="23.8675" x2="18.485" y2="23.815" width="0.254" layer="1"/>
 <wire x1="17.145" y1="23.8675" x2="16.455" y2="23.8675" width="0.254" layer="1"/>
@@ -5405,10 +5450,10 @@ Please make sure your boards conform to 
 <wire x1="16.40625" y1="26.4075" x2="16.1925" y2="26.19375" width="0.254" layer="1"/>
 </signal>
 <signal name="N$19">
-<contactref element="L1" pad="1"/>
-<contactref element="C10" pad="2"/>
-<contactref element="D6" pad="C"/>
-<contactref element="U11" pad="6"/>
+<contactref element="L201" pad="1"/>
+<contactref element="C206" pad="2"/>
+<contactref element="D202" pad="C"/>
+<contactref element="U201" pad="6"/>
 <wire x1="20.885" y1="25.715" x2="22.225" y2="25.715" width="0.6096" layer="1"/>
 <wire x1="22.225" y1="25.715" x2="23.3675" y2="25.715" width="0.6096" layer="1"/>
 <wire x1="23.3675" y1="25.715" x2="23.495" y2="25.5875" width="0.6096" layer="1"/>
@@ -5418,9 +5463,9 @@ Please make sure your boards conform to 
 <wire x1="20.885" y1="26.4375" x2="20.335" y2="26.9875" width="0.6096" layer="1"/>
 </signal>
 <signal name="N$20">
-<contactref element="C10" pad="1"/>
-<contactref element="U11" pad="1"/>
-<contactref element="D7" pad="C"/>
+<contactref element="C206" pad="1"/>
+<contactref element="U201" pad="1"/>
+<contactref element="D203" pad="C"/>
 <wire x1="18.535" y1="28.575" x2="18.535" y2="28.455" width="0.254" layer="1"/>
 <wire x1="18.535" y1="28.455" x2="19.05" y2="27.94" width="0.254" layer="1"/>
 <wire x1="19.05" y1="27.94" x2="19.05" y2="27.0025" width="0.254" layer="1"/>
@@ -5429,36 +5474,36 @@ Please make sure your boards conform to 
 <wire x1="19.05" y1="26.28" x2="18.485" y2="25.715" width="0.254" layer="1"/>
 </signal>
 <signal name="N$21">
-<contactref element="D8" pad="A"/>
-<contactref element="R20" pad="2"/>
+<contactref element="D204" pad="A"/>
+<contactref element="R204" pad="2"/>
 <wire x1="86.6775" y1="27.063" x2="85.7045" y2="27.063" width="0.254" layer="1"/>
 <wire x1="85.7045" y1="27.063" x2="85.4075" y2="27.36" width="0.254" layer="1"/>
 </signal>
 <signal name="N$22">
-<contactref element="R21" pad="2"/>
-<contactref element="D9" pad="A"/>
+<contactref element="R205" pad="2"/>
+<contactref element="D205" pad="A"/>
 <wire x1="86.6775" y1="21.348" x2="85.7045" y2="21.348" width="0.254" layer="1"/>
 <wire x1="85.7045" y1="21.348" x2="85.4075" y2="21.645" width="0.254" layer="1"/>
 </signal>
 <signal name="N$23">
-<contactref element="R22" pad="2"/>
-<contactref element="D10" pad="A"/>
+<contactref element="R206" pad="2"/>
+<contactref element="D206" pad="A"/>
 <wire x1="86.6775" y1="15.633" x2="85.7045" y2="15.633" width="0.254" layer="1"/>
 <wire x1="85.7045" y1="15.633" x2="85.4075" y2="15.93" width="0.254" layer="1"/>
 </signal>
 <signal name="N$25">
-<contactref element="R17" pad="2"/>
-<contactref element="Q3" pad="1"/>
-<contactref element="D5" pad="A"/>
+<contactref element="R201" pad="2"/>
+<contactref element="Q201" pad="1"/>
+<contactref element="D201" pad="A"/>
 <wire x1="13.1375" y1="23.1775" x2="13.1375" y2="24.835" width="0.6096" layer="1"/>
 <wire x1="13.1375" y1="24.835" x2="13.3375" y2="25.035" width="0.6096" layer="1"/>
 <wire x1="13.1375" y1="23.1775" x2="13.1375" y2="21.8425" width="0.6096" layer="1"/>
 <wire x1="13.1375" y1="21.8425" x2="13.7075" y2="21.2725" width="0.6096" layer="1"/>
 </signal>
 <signal name="N$1">
-<contactref element="Q1" pad="G1"/>
-<contactref element="R9" pad="2"/>
-<contactref element="R11" pad="2"/>
+<contactref element="Q101" pad="G1"/>
+<contactref element="R117" pad="2"/>
+<contactref element="R121" pad="2"/>
 <wire x1="21.535" y1="6.35" x2="21.535" y2="7.9375" width="0.254" layer="1"/>
 <wire x1="20.955" y1="9.245" x2="20.955" y2="8.89" width="0.254" layer="1"/>
 <wire x1="20.955" y1="8.89" x2="21.2725" y2="8.5725" width="0.254" layer="1"/>
@@ -5466,10 +5511,10 @@ Please make sure your boards conform to 
 <wire x1="21.2725" y1="8.2" x2="21.535" y2="7.9375" width="0.254" layer="1"/>
 </signal>
 <signal name="N$2">
-<contactref element="Q1" pad="D1_2"/>
-<contactref element="D1" pad="A"/>
-<contactref element="Q1" pad="D1"/>
-<contactref element="J8" pad="2"/>
+<contactref element="Q101" pad="D1_2"/>
+<contactref element="D101" pad="A"/>
+<contactref element="Q101" pad="D1"/>
+<contactref element="J112" pad="2"/>
 <wire x1="15.51" y1="8.255" x2="15.51" y2="9.4775" width="0.8128" layer="1"/>
 <wire x1="15.51" y1="9.4775" x2="16.1925" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="16.1925" y1="10.16" x2="16.8275" y2="10.16" width="0.8128" layer="1"/>
@@ -5480,19 +5525,19 @@ Please make sure your boards conform to 
 <wire x1="20.305" y1="10.31" x2="20.455" y2="10.16" width="0.254" layer="1"/>
 </signal>
 <signal name="N$3">
-<contactref element="R10" pad="2"/>
-<contactref element="R12" pad="2"/>
-<contactref element="Q1" pad="G2"/>
+<contactref element="R118" pad="2"/>
+<contactref element="R122" pad="2"/>
+<contactref element="Q101" pad="G2"/>
 <wire x1="20.375" y1="12.7" x2="20.375" y2="12.01" width="0.254" layer="1"/>
 <wire x1="20.955" y1="11.075" x2="20.955" y2="11.43" width="0.254" layer="1"/>
 <wire x1="20.955" y1="11.43" x2="20.375" y2="12.01" width="0.254" layer="1"/>
 <wire x1="20.375" y1="14.12875" x2="20.375" y2="12.7" width="0.254" layer="1"/>
 </signal>
 <signal name="N$5">
-<contactref element="D2" pad="A"/>
-<contactref element="Q1" pad="D2_2"/>
-<contactref element="Q1" pad="D2"/>
-<contactref element="J9" pad="2"/>
+<contactref element="D102" pad="A"/>
+<contactref element="Q101" pad="D2_2"/>
+<contactref element="Q101" pad="D2"/>
+<contactref element="J113" pad="2"/>
 <wire x1="24.4" y1="8.255" x2="24.4" y2="9.5725" width="0.8128" layer="1"/>
 <wire x1="24.4" y1="9.5725" x2="23.97125" y2="10.00125" width="0.8128" layer="1"/>
 <wire x1="23.97125" y1="10.00125" x2="23.8125" y2="10.16" width="0.8128" layer="1"/>
@@ -5503,9 +5548,9 @@ Please make sure your boards conform to 
 <wire x1="21.605" y1="10.01" x2="21.455" y2="10.16" width="0.254" layer="1"/>
 </signal>
 <signal name="N$7">
-<contactref element="R13" pad="2"/>
-<contactref element="R15" pad="2"/>
-<contactref element="Q2" pad="G1"/>
+<contactref element="R125" pad="2"/>
+<contactref element="R129" pad="2"/>
+<contactref element="Q103" pad="G1"/>
 <wire x1="39.315" y1="6.35" x2="39.315" y2="7.9375" width="0.254" layer="1"/>
 <wire x1="38.735" y1="9.245" x2="38.735" y2="8.89" width="0.254" layer="1"/>
 <wire x1="38.735" y1="8.89" x2="39.0525" y2="8.5725" width="0.254" layer="1"/>
@@ -5513,10 +5558,10 @@ Please make sure your boards conform to 
 <wire x1="39.0525" y1="8.2" x2="39.315" y2="7.9375" width="0.254" layer="1"/>
 </signal>
 <signal name="N$12">
-<contactref element="D3" pad="A"/>
-<contactref element="Q2" pad="D1_2"/>
-<contactref element="Q2" pad="D1"/>
-<contactref element="J10" pad="2"/>
+<contactref element="D105" pad="A"/>
+<contactref element="Q103" pad="D1_2"/>
+<contactref element="Q103" pad="D1"/>
+<contactref element="J116" pad="2"/>
 <wire x1="38.235" y1="10.16" x2="34.925" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="34.925" y1="10.16" x2="33.9725" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="33.9725" y1="10.16" x2="33.29" y2="9.4775" width="0.8128" layer="1"/>
@@ -5527,19 +5572,19 @@ Please make sure your boards conform to 
 <wire x1="38.085" y1="10.31" x2="38.235" y2="10.16" width="0.254" layer="1"/>
 </signal>
 <signal name="N$13">
-<contactref element="R14" pad="2"/>
-<contactref element="R16" pad="2"/>
-<contactref element="Q2" pad="G2"/>
+<contactref element="R126" pad="2"/>
+<contactref element="R130" pad="2"/>
+<contactref element="Q103" pad="G2"/>
 <wire x1="38.155" y1="12.7" x2="38.155" y2="12.01" width="0.254" layer="1"/>
 <wire x1="38.155" y1="12.01" x2="38.735" y2="11.43" width="0.254" layer="1"/>
 <wire x1="38.735" y1="11.43" x2="38.735" y2="11.075" width="0.254" layer="1"/>
 <wire x1="38.155" y1="14.12875" x2="38.155" y2="12.7" width="0.254" layer="1"/>
 </signal>
 <signal name="N$16">
-<contactref element="D4" pad="A"/>
-<contactref element="Q2" pad="D2_2"/>
-<contactref element="Q2" pad="D2"/>
-<contactref element="J11" pad="2"/>
+<contactref element="D106" pad="A"/>
+<contactref element="Q103" pad="D2_2"/>
+<contactref element="Q103" pad="D2"/>
+<contactref element="J117" pad="2"/>
 <wire x1="39.235" y1="10.16" x2="41.5925" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="41.5925" y1="10.16" x2="41.75125" y2="10.00125" width="0.8128" layer="1"/>
 <wire x1="41.75125" y1="10.00125" x2="42.18" y2="9.5725" width="0.8128" layer="1"/>
@@ -5550,9 +5595,9 @@ Please make sure your boards conform to 
 <wire x1="39.385" y1="10.01" x2="39.235" y2="10.16" width="0.254" layer="1"/>
 </signal>
 <signal name="OUTPUT2">
-<contactref element="R10" pad="1"/>
-<contactref element="R24" pad="1"/>
-<contactref element="U2" pad="7"/>
+<contactref element="R118" pad="1"/>
+<contactref element="R208" pad="1"/>
+<contactref element="U202" pad="7"/>
 <wire x1="21.535" y1="14.12875" x2="21.535" y2="14.8675" width="0.254" layer="1"/>
 <wire x1="21.535" y1="14.8675" x2="21.9075" y2="15.24" width="0.254" layer="1"/>
 <wire x1="24.4475" y1="15.24" x2="21.9075" y2="15.24" width="0.254" layer="1"/>
@@ -5565,22 +5610,22 @@ Please make sure your boards conform to 
 <wire x1="63.65875" y1="23.1775" x2="63.1825" y2="23.1775" width="0.254" layer="16"/>
 <wire x1="63.1825" y1="23.1775" x2="55.245" y2="15.24" width="0.254" layer="16"/>
 <wire x1="55.245" y1="15.24" x2="44.92625" y2="15.24" width="0.254" layer="16"/>
-<wire x1="44.92625" y1="15.24" x2="43.4975" y2="16.66875" width="0.254" layer="16"/>
-<wire x1="43.4975" y1="16.66875" x2="41.91" y2="16.66875" width="0.254" layer="16"/>
+<wire x1="44.92625" y1="15.24" x2="43.33875" y2="16.8275" width="0.254" layer="16"/>
+<wire x1="43.33875" y1="16.8275" x2="42.06875" y2="16.8275" width="0.254" layer="16"/>
 <via x="24.4475" y="15.875" extent="1-16" drill="0.3048"/>
 <wire x1="24.4475" y1="15.875" x2="24.4475" y2="15.24" width="0.254" layer="1"/>
 <wire x1="24.4475" y1="15.24" x2="24.4475" y2="14.18375" width="0.254" layer="1"/>
 <wire x1="24.4475" y1="14.18375" x2="24.3925" y2="14.12875" width="0.254" layer="1"/>
-<wire x1="41.91" y1="16.66875" x2="41.43375" y2="16.1925" width="0.254" layer="16"/>
+<wire x1="42.06875" y1="16.8275" x2="41.43375" y2="16.1925" width="0.254" layer="16"/>
 <wire x1="41.43375" y1="16.1925" x2="36.67125" y2="16.1925" width="0.254" layer="16"/>
 <wire x1="36.67125" y1="16.1925" x2="36.03625" y2="15.5575" width="0.254" layer="16"/>
 <wire x1="36.03625" y1="15.5575" x2="24.765" y2="15.5575" width="0.254" layer="16"/>
 <wire x1="24.765" y1="15.5575" x2="24.4475" y2="15.875" width="0.254" layer="16"/>
 </signal>
 <signal name="OUTPUT3">
-<contactref element="R13" pad="1"/>
-<contactref element="R25" pad="1"/>
-<contactref element="U2" pad="8"/>
+<contactref element="R125" pad="1"/>
+<contactref element="R209" pad="1"/>
+<contactref element="U202" pad="8"/>
 <wire x1="38.155" y1="6.35" x2="38.155" y2="5.4525" width="0.254" layer="1"/>
 <wire x1="38.155" y1="5.4525" x2="38.1" y2="5.3975" width="0.254" layer="1"/>
 <via x="38.1" y="5.3975" extent="1-16" drill="0.3048" diameter="0.254"/>
@@ -5606,9 +5651,9 @@ Please make sure your boards conform to 
 <wire x1="34.07625" y1="14.9225" x2="37.1475" y2="14.9225" width="0.254" layer="1"/>
 </signal>
 <signal name="OUTPUT4">
-<contactref element="R14" pad="1"/>
-<contactref element="R26" pad="1"/>
-<contactref element="U2" pad="9"/>
+<contactref element="R126" pad="1"/>
+<contactref element="R210" pad="1"/>
+<contactref element="U202" pad="9"/>
 <wire x1="39.315" y1="14.12875" x2="39.315" y2="14.70875" width="0.254" layer="1"/>
 <wire x1="39.315" y1="14.70875" x2="39.52875" y2="14.9225" width="0.254" layer="1"/>
 <wire x1="42.1725" y1="14.12875" x2="42.1725" y2="14.9225" width="0.254" layer="1"/>
@@ -5626,8 +5671,8 @@ Please make sure your boards conform to 
 <wire x1="57.59875" y1="26.325" x2="54.87" y2="26.325" width="0.254" layer="1"/>
 </signal>
 <signal name="N$10">
-<contactref element="R1" pad="1"/>
-<contactref element="J1" pad="2"/>
+<contactref element="R101" pad="1"/>
+<contactref element="J101" pad="2"/>
 <wire x1="77.525" y1="26.9875" x2="77.525" y2="28.52" width="0.254" layer="1"/>
 <wire x1="77.525" y1="28.52" x2="76.5175" y2="29.5275" width="0.254" layer="1"/>
 <wire x1="76.5175" y1="29.5275" x2="76.5175" y2="32.7025" width="0.254" layer="1"/>
@@ -5635,17 +5680,17 @@ Please make sure your boards conform to 
 <wire x1="78.74" y1="34.925" x2="78.74" y2="36.195" width="0.254" layer="1"/>
 </signal>
 <signal name="N$14">
-<contactref element="R1" pad="2"/>
-<contactref element="OK1" pad="1"/>
+<contactref element="R101" pad="2"/>
+<contactref element="U102" pad="1"/>
 <wire x1="78.685" y1="26.9875" x2="78.685" y2="25.52" width="0.254" layer="1"/>
 <wire x1="78.685" y1="25.52" x2="78.74" y2="25.465" width="0.254" layer="1"/>
 </signal>
 <signal name="INPUT1">
-<contactref element="OK1" pad="15"/>
-<contactref element="R3" pad="1"/>
-<contactref element="C1" pad="1"/>
-<contactref element="R47" pad="1"/>
-<contactref element="U2" pad="11"/>
+<contactref element="U102" pad="15"/>
+<contactref element="R105" pad="1"/>
+<contactref element="C101" pad="1"/>
+<contactref element="R215" pad="1"/>
+<contactref element="U202" pad="11"/>
 <wire x1="77.47" y1="18.985" x2="77.47" y2="17.4775" width="0.254" layer="1"/>
 <wire x1="77.47" y1="17.4775" x2="77.455" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="77.525" y1="16.1925" x2="77.525" y2="17.3925" width="0.254" layer="1"/>
@@ -5673,21 +5718,21 @@ Please make sure your boards conform to 
 <wire x1="80.16875" y1="30.1625" x2="79.32" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="N$15">
-<contactref element="R2" pad="1"/>
-<contactref element="J2" pad="2"/>
+<contactref element="R102" pad="1"/>
+<contactref element="J102" pad="2"/>
 <wire x1="74.985" y1="26.9875" x2="74.985" y2="29.79" width="0.254" layer="1"/>
 <wire x1="74.985" y1="29.79" x2="69.85" y2="34.925" width="0.254" layer="1"/>
 <wire x1="69.85" y1="34.925" x2="69.85" y2="36.195" width="0.254" layer="1"/>
 </signal>
 <signal name="N$26">
-<contactref element="R2" pad="2"/>
-<contactref element="OK1" pad="3"/>
+<contactref element="R102" pad="2"/>
+<contactref element="U102" pad="3"/>
 <wire x1="76.145" y1="26.9875" x2="76.145" y2="25.52" width="0.254" layer="1"/>
 <wire x1="76.145" y1="25.52" x2="76.2" y2="25.465" width="0.254" layer="1"/>
 </signal>
 <signal name="N$27">
-<contactref element="R5" pad="1"/>
-<contactref element="J3" pad="2"/>
+<contactref element="R109" pad="1"/>
+<contactref element="J105" pad="2"/>
 <wire x1="72.445" y1="26.9875" x2="72.445" y2="28.2025" width="0.254" layer="1"/>
 <wire x1="72.445" y1="28.2025" x2="71.755" y2="28.8925" width="0.254" layer="1"/>
 <wire x1="71.755" y1="28.8925" x2="67.46875" y2="28.8925" width="0.254" layer="1"/>
@@ -5695,14 +5740,14 @@ Please make sure your boards conform to 
 <wire x1="60.96" y1="35.40125" x2="60.96" y2="36.195" width="0.254" layer="1"/>
 </signal>
 <signal name="N$29">
-<contactref element="R5" pad="2"/>
-<contactref element="OK1" pad="5"/>
+<contactref element="R109" pad="2"/>
+<contactref element="U102" pad="5"/>
 <wire x1="73.605" y1="26.9875" x2="73.605" y2="25.52" width="0.254" layer="1"/>
 <wire x1="73.605" y1="25.52" x2="73.66" y2="25.465" width="0.254" layer="1"/>
 </signal>
 <signal name="N$30">
-<contactref element="R6" pad="1"/>
-<contactref element="J4" pad="2"/>
+<contactref element="R110" pad="1"/>
+<contactref element="J106" pad="2"/>
 <wire x1="69.905" y1="26.9875" x2="69.905" y2="27.72625" width="0.254" layer="1"/>
 <wire x1="69.905" y1="27.72625" x2="69.215" y2="28.41625" width="0.254" layer="1"/>
 <wire x1="69.215" y1="28.41625" x2="67.15125" y2="28.41625" width="0.254" layer="1"/>
@@ -5712,17 +5757,17 @@ Please make sure your boards conform to 
 <wire x1="52.07" y1="34.925" x2="52.07" y2="36.195" width="0.254" layer="1"/>
 </signal>
 <signal name="N$32">
-<contactref element="R6" pad="2"/>
-<contactref element="OK1" pad="7"/>
+<contactref element="R110" pad="2"/>
+<contactref element="U102" pad="7"/>
 <wire x1="71.065" y1="26.9875" x2="71.065" y2="25.52" width="0.254" layer="1"/>
 <wire x1="71.065" y1="25.52" x2="71.12" y2="25.465" width="0.254" layer="1"/>
 </signal>
 <signal name="INPUT2">
-<contactref element="R4" pad="1"/>
-<contactref element="C2" pad="1"/>
-<contactref element="OK1" pad="13"/>
-<contactref element="R48" pad="1"/>
-<contactref element="U2" pad="25"/>
+<contactref element="R106" pad="1"/>
+<contactref element="C102" pad="1"/>
+<contactref element="U102" pad="13"/>
+<contactref element="R216" pad="1"/>
+<contactref element="U202" pad="25"/>
 <wire x1="74.985" y1="16.1925" x2="74.985" y2="17.3925" width="0.254" layer="1"/>
 <wire x1="74.985" y1="17.3925" x2="74.915" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="74.93" y1="18.985" x2="74.93" y2="17.4775" width="0.254" layer="1"/>
@@ -5752,11 +5797,11 @@ Please make sure your boards conform to 
 <wire x1="66.675" y1="27.46375" x2="54.9275" y2="15.71625" width="0.254" layer="16"/>
 </signal>
 <signal name="INPUT4">
-<contactref element="R8" pad="1"/>
-<contactref element="C4" pad="1"/>
-<contactref element="OK1" pad="9"/>
-<contactref element="R50" pad="1"/>
-<contactref element="U2" pad="27"/>
+<contactref element="R114" pad="1"/>
+<contactref element="C106" pad="1"/>
+<contactref element="U102" pad="9"/>
+<contactref element="R218" pad="1"/>
+<contactref element="U202" pad="27"/>
 <wire x1="69.85" y1="18.985" x2="69.85" y2="17.4775" width="0.254" layer="1"/>
 <wire x1="69.85" y1="17.4775" x2="69.835" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="69.905" y1="16.1925" x2="69.905" y2="17.3925" width="0.254" layer="1"/>
@@ -5786,11 +5831,11 @@ Please make sure your boards conform to 
 <wire x1="55.5625" y1="30.1625" x2="55.72125" y2="30.00375" width="0.254" layer="1"/>
 </signal>
 <signal name="INPUT3">
-<contactref element="R7" pad="1"/>
-<contactref element="C3" pad="1"/>
-<contactref element="OK1" pad="11"/>
-<contactref element="R49" pad="1"/>
-<contactref element="U2" pad="26"/>
+<contactref element="R113" pad="1"/>
+<contactref element="C105" pad="1"/>
+<contactref element="U102" pad="11"/>
+<contactref element="R217" pad="1"/>
+<contactref element="U202" pad="26"/>
 <wire x1="72.39" y1="18.985" x2="72.39" y2="17.4775" width="0.254" layer="1"/>
 <wire x1="72.39" y1="17.4775" x2="72.375" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="72.445" y1="16.1925" x2="72.445" y2="17.3925" width="0.254" layer="1"/>
@@ -5820,15 +5865,15 @@ Please make sure your boards conform to 
 <wire x1="50.00625" y1="16.8275" x2="50.07" y2="16.89125" width="0.254" layer="1"/>
 </signal>
 <signal name="VCCIO">
-<contactref element="U1" pad="1"/>
-<contactref element="J1" pad="3"/>
-<contactref element="J2" pad="3"/>
-<contactref element="J3" pad="3"/>
-<contactref element="J4" pad="3"/>
-<contactref element="J5" pad="3"/>
-<contactref element="J6" pad="3"/>
-<contactref element="J14" pad="3"/>
-<contactref element="J15" pad="3"/>
+<contactref element="U101" pad="1"/>
+<contactref element="J101" pad="3"/>
+<contactref element="J102" pad="3"/>
+<contactref element="J105" pad="3"/>
+<contactref element="J106" pad="3"/>
+<contactref element="J103" pad="3"/>
+<contactref element="J104" pad="3"/>
+<contactref element="J107" pad="3"/>
+<contactref element="J108" pad="3"/>
 <wire x1="13.335" y1="31.5625" x2="13.335" y2="33.9725" width="1.016" layer="1"/>
 <wire x1="13.335" y1="33.9725" x2="11.1125" y2="36.195" width="1.016" layer="1"/>
 <wire x1="11.1125" y1="36.195" x2="11.1125" y2="38.89375" width="1.016" layer="1"/>
@@ -5859,11 +5904,11 @@ Please make sure your boards conform to 
 <wire x1="71.85" y1="40.57625" x2="71.91375" y2="40.64" width="1.016" layer="1"/>
 </signal>
 <signal name="INPUT5">
-<contactref element="OK2" pad="15"/>
-<contactref element="R32" pad="1"/>
-<contactref element="C15" pad="1"/>
-<contactref element="R51" pad="1"/>
-<contactref element="U2" pad="28"/>
+<contactref element="U103" pad="15"/>
+<contactref element="R107" pad="1"/>
+<contactref element="C103" pad="1"/>
+<contactref element="R219" pad="1"/>
+<contactref element="U202" pad="28"/>
 <wire x1="39.99" y1="16.1925" x2="39.99" y2="17.3925" width="0.254" layer="1"/>
 <wire x1="39.99" y1="17.3925" x2="40.06" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="40.005" y1="18.985" x2="40.005" y2="17.5175" width="0.254" layer="1"/>
@@ -5881,11 +5926,11 @@ Please make sure your boards conform to 
 <wire x1="51.67" y1="18.97375" x2="51.27625" y2="19.3675" width="0.254" layer="1"/>
 </signal>
 <signal name="INPUT6">
-<contactref element="R34" pad="1"/>
-<contactref element="C16" pad="1"/>
-<contactref element="OK2" pad="13"/>
-<contactref element="R52" pad="1"/>
-<contactref element="U2" pad="29"/>
+<contactref element="R108" pad="1"/>
+<contactref element="C104" pad="1"/>
+<contactref element="U103" pad="13"/>
+<contactref element="R220" pad="1"/>
+<contactref element="U202" pad="29"/>
 <wire x1="37.45" y1="16.1925" x2="37.45" y2="17.3925" width="0.254" layer="1"/>
 <wire x1="37.45" y1="17.3925" x2="37.52" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="37.465" y1="18.985" x2="37.465" y2="17.5175" width="0.254" layer="1"/>
@@ -5910,11 +5955,11 @@ Please make sure your boards conform to 
 <wire x1="52.47" y1="19.12625" x2="52.22875" y2="19.3675" width="0.254" layer="1"/>
 </signal>
 <signal name="INPUT7">
-<contactref element="R36" pad="1"/>
-<contactref element="C17" pad="1"/>
-<contactref element="OK2" pad="11"/>
-<contactref element="R53" pad="1"/>
-<contactref element="U2" pad="30"/>
+<contactref element="R115" pad="1"/>
+<contactref element="C107" pad="1"/>
+<contactref element="U103" pad="11"/>
+<contactref element="R221" pad="1"/>
+<contactref element="U202" pad="30"/>
 <wire x1="34.91" y1="16.1925" x2="34.91" y2="17.3925" width="0.254" layer="1"/>
 <wire x1="34.91" y1="17.3925" x2="34.98" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="34.925" y1="18.985" x2="34.925" y2="17.5175" width="0.254" layer="1"/>
@@ -5941,11 +5986,11 @@ Please make sure your boards conform to 
 <wire x1="53.27" y1="19.27875" x2="53.18125" y2="19.3675" width="0.254" layer="1"/>
 </signal>
 <signal name="INPUT8">
-<contactref element="R38" pad="1"/>
-<contactref element="C18" pad="1"/>
-<contactref element="OK2" pad="9"/>
-<contactref element="R54" pad="1"/>
-<contactref element="U2" pad="31"/>
+<contactref element="R116" pad="1"/>
+<contactref element="C108" pad="1"/>
+<contactref element="U103" pad="9"/>
+<contactref element="R222" pad="1"/>
+<contactref element="U202" pad="31"/>
 <wire x1="32.37" y1="16.1925" x2="32.37" y2="17.3925" width="0.254" layer="1"/>
 <wire x1="32.37" y1="17.3925" x2="32.44" y2="17.4625" width="0.254" layer="1"/>
 <wire x1="32.385" y1="18.985" x2="32.385" y2="17.5175" width="0.254" layer="1"/>
@@ -5976,9 +6021,9 @@ Please make sure your boards conform to 
 <wire x1="54.13375" y1="20.0025" x2="54.13375" y2="19.3675" width="0.254" layer="16"/>
 </signal>
 <signal name="OUTPUT5">
-<contactref element="R27" pad="1"/>
-<contactref element="R39" pad="1"/>
-<contactref element="U2" pad="12"/>
+<contactref element="R211" pad="1"/>
+<contactref element="R119" pad="1"/>
+<contactref element="U202" pad="12"/>
 <wire x1="55.935" y1="6.35" x2="55.935" y2="5.4525" width="0.254" layer="1"/>
 <wire x1="55.935" y1="5.4525" x2="55.88" y2="5.3975" width="0.254" layer="1"/>
 <via x="55.88" y="5.3975" extent="1-16" drill="0.3048" diameter="0.254"/>
@@ -5999,9 +6044,9 @@ Please make sure your boards conform to 
 <wire x1="51.6975" y1="14.76375" x2="54.9275" y2="14.76375" width="0.254" layer="1"/>
 </signal>
 <signal name="OUTPUT6">
-<contactref element="R28" pad="1"/>
-<contactref element="R41" pad="1"/>
-<contactref element="U2" pad="13"/>
+<contactref element="R212" pad="1"/>
+<contactref element="R120" pad="1"/>
+<contactref element="U202" pad="13"/>
 <wire x1="57.095" y1="14.12875" x2="57.095" y2="14.8675" width="0.254" layer="1"/>
 <wire x1="57.095" y1="14.8675" x2="57.30875" y2="15.08125" width="0.254" layer="1"/>
 <wire x1="51.67" y1="26.325" x2="51.67" y2="27.69875" width="0.254" layer="1"/>
@@ -6016,9 +6061,9 @@ Please make sure your boards conform to 
 <wire x1="59.9525" y1="15.02625" x2="60.0075" y2="15.08125" width="0.254" layer="1"/>
 </signal>
 <signal name="OUTPUT7">
-<contactref element="R29" pad="1"/>
-<contactref element="R43" pad="1"/>
-<contactref element="U2" pad="14"/>
+<contactref element="R213" pad="1"/>
+<contactref element="R127" pad="1"/>
+<contactref element="U202" pad="14"/>
 <wire x1="73.715" y1="6.35" x2="73.715" y2="5.4525" width="0.254" layer="1"/>
 <wire x1="73.715" y1="5.4525" x2="73.66" y2="5.3975" width="0.254" layer="1"/>
 <via x="73.66" y="5.3975" extent="1-16" drill="0.3048" diameter="0.254"/>
@@ -6038,9 +6083,9 @@ Please make sure your boards conform to 
 <wire x1="69.16" y1="14.44625" x2="68.8425" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="OUTPUT8">
-<contactref element="R30" pad="1"/>
-<contactref element="R45" pad="1"/>
-<contactref element="U2" pad="15"/>
+<contactref element="R214" pad="1"/>
+<contactref element="R128" pad="1"/>
+<contactref element="U202" pad="15"/>
 <wire x1="77.7325" y1="14.12875" x2="77.7325" y2="14.81875" width="0.254" layer="1"/>
 <wire x1="77.7325" y1="14.81875" x2="77.62875" y2="14.9225" width="0.254" layer="1"/>
 <wire x1="77.62875" y1="14.9225" x2="74.93" y2="14.9225" width="0.254" layer="1"/>
@@ -6055,82 +6100,82 @@ Please make sure your boards conform to 
 <wire x1="74.875" y1="14.8675" x2="74.93" y2="14.9225" width="0.254" layer="1"/>
 </signal>
 <signal name="N$4">
-<contactref element="D11" pad="A"/>
-<contactref element="R23" pad="2"/>
+<contactref element="D207" pad="A"/>
+<contactref element="R207" pad="2"/>
 <wire x1="14.0455" y1="12.7" x2="14.0455" y2="13.83175" width="0.254" layer="1"/>
 <wire x1="14.0455" y1="13.83175" x2="14.3425" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="N$6">
-<contactref element="D12" pad="A"/>
-<contactref element="R24" pad="2"/>
+<contactref element="D208" pad="A"/>
+<contactref element="R208" pad="2"/>
 <wire x1="22.9355" y1="12.7" x2="22.9355" y2="13.83175" width="0.254" layer="1"/>
 <wire x1="22.9355" y1="13.83175" x2="23.2325" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="N$8">
-<contactref element="D13" pad="A"/>
-<contactref element="R25" pad="2"/>
+<contactref element="D209" pad="A"/>
+<contactref element="R209" pad="2"/>
 <wire x1="31.8255" y1="12.7" x2="31.8255" y2="13.83175" width="0.254" layer="1"/>
 <wire x1="31.8255" y1="13.83175" x2="32.1225" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="N$9">
-<contactref element="D14" pad="A"/>
-<contactref element="R26" pad="2"/>
+<contactref element="D210" pad="A"/>
+<contactref element="R210" pad="2"/>
 <wire x1="40.7155" y1="12.7" x2="40.7155" y2="13.83175" width="0.254" layer="1"/>
 <wire x1="40.7155" y1="13.83175" x2="41.0125" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="N$11">
-<contactref element="D15" pad="A"/>
-<contactref element="R27" pad="2"/>
+<contactref element="D211" pad="A"/>
+<contactref element="R211" pad="2"/>
 <wire x1="49.6055" y1="12.7" x2="49.6055" y2="13.83175" width="0.254" layer="1"/>
 <wire x1="49.6055" y1="13.83175" x2="49.9025" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="N$17">
-<contactref element="D16" pad="A"/>
-<contactref element="R28" pad="2"/>
+<contactref element="D212" pad="A"/>
+<contactref element="R212" pad="2"/>
 <wire x1="58.4955" y1="12.7" x2="58.4955" y2="13.83175" width="0.254" layer="1"/>
 <wire x1="58.4955" y1="13.83175" x2="58.7925" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="N$28">
-<contactref element="D17" pad="A"/>
-<contactref element="R29" pad="2"/>
+<contactref element="D213" pad="A"/>
+<contactref element="R213" pad="2"/>
 <wire x1="67.3855" y1="12.7" x2="67.3855" y2="13.83175" width="0.254" layer="1"/>
 <wire x1="67.3855" y1="13.83175" x2="67.6825" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="N$31">
-<contactref element="D18" pad="A"/>
-<contactref element="R30" pad="2"/>
+<contactref element="D214" pad="A"/>
+<contactref element="R214" pad="2"/>
 <wire x1="76.2755" y1="12.7" x2="76.2755" y2="13.83175" width="0.254" layer="1"/>
 <wire x1="76.2755" y1="13.83175" x2="76.5725" y2="14.12875" width="0.254" layer="1"/>
 </signal>
 <signal name="N$33">
-<contactref element="R31" pad="1"/>
-<contactref element="J5" pad="2"/>
+<contactref element="R103" pad="1"/>
+<contactref element="J103" pad="2"/>
 <wire x1="40.06" y1="26.9875" x2="40.06" y2="31.805" width="0.254" layer="1"/>
 <wire x1="40.06" y1="31.805" x2="43.18" y2="34.925" width="0.254" layer="1"/>
 <wire x1="43.18" y1="34.925" x2="43.18" y2="36.195" width="0.254" layer="1"/>
 </signal>
 <signal name="N$34">
-<contactref element="R31" pad="2"/>
-<contactref element="OK2" pad="1"/>
+<contactref element="R103" pad="2"/>
+<contactref element="U103" pad="1"/>
 <wire x1="41.22" y1="26.9875" x2="41.22" y2="25.52" width="0.254" layer="1"/>
 <wire x1="41.22" y1="25.52" x2="41.275" y2="25.465" width="0.254" layer="1"/>
 </signal>
 <signal name="N$35">
-<contactref element="R33" pad="1"/>
-<contactref element="J6" pad="2"/>
+<contactref element="R104" pad="1"/>
+<contactref element="J104" pad="2"/>
 <wire x1="37.52" y1="26.9875" x2="37.52" y2="31.695" width="0.254" layer="1"/>
 <wire x1="37.52" y1="31.695" x2="34.29" y2="34.925" width="0.254" layer="1"/>
 <wire x1="34.29" y1="34.925" x2="34.29" y2="36.195" width="0.254" layer="1"/>
 </signal>
 <signal name="N$36">
-<contactref element="R33" pad="2"/>
-<contactref element="OK2" pad="3"/>
+<contactref element="R104" pad="2"/>
+<contactref element="U103" pad="3"/>
 <wire x1="38.68" y1="26.9875" x2="38.68" y2="25.52" width="0.254" layer="1"/>
 <wire x1="38.68" y1="25.52" x2="38.735" y2="25.465" width="0.254" layer="1"/>
 </signal>
 <signal name="N$37">
-<contactref element="R35" pad="1"/>
-<contactref element="J14" pad="2"/>
+<contactref element="R111" pad="1"/>
+<contactref element="J107" pad="2"/>
 <wire x1="34.98" y1="26.9875" x2="34.98" y2="28.2025" width="0.254" layer="1"/>
 <wire x1="34.98" y1="28.2025" x2="34.44875" y2="28.73375" width="0.254" layer="1"/>
 <wire x1="34.44875" y1="28.73375" x2="31.59125" y2="28.73375" width="0.254" layer="1"/>
@@ -6138,14 +6183,14 @@ Please make sure your boards conform to 
 <wire x1="25.4" y1="34.925" x2="25.4" y2="36.195" width="0.254" layer="1"/>
 </signal>
 <signal name="N$38">
-<contactref element="R35" pad="2"/>
-<contactref element="OK2" pad="5"/>
+<contactref element="R111" pad="2"/>
+<contactref element="U103" pad="5"/>
 <wire x1="36.14" y1="26.9875" x2="36.14" y2="25.52" width="0.254" layer="1"/>
 <wire x1="36.14" y1="25.52" x2="36.195" y2="25.465" width="0.254" layer="1"/>
 </signal>
 <signal name="N$39">
-<contactref element="R37" pad="1"/>
-<contactref element="J15" pad="2"/>
+<contactref element="R112" pad="1"/>
+<contactref element="J108" pad="2"/>
 <wire x1="32.44" y1="26.9875" x2="32.44" y2="27.885" width="0.254" layer="1"/>
 <wire x1="32.44" y1="27.885" x2="32.0675" y2="28.2575" width="0.254" layer="1"/>
 <wire x1="32.0675" y1="28.2575" x2="31.27375" y2="28.2575" width="0.254" layer="1"/>
@@ -6155,15 +6200,15 @@ Please make sure your boards conform to 
 <wire x1="16.51" y1="34.925" x2="16.51" y2="36.195" width="0.254" layer="1"/>
 </signal>
 <signal name="N$40">
-<contactref element="R37" pad="2"/>
-<contactref element="OK2" pad="7"/>
+<contactref element="R112" pad="2"/>
+<contactref element="U103" pad="7"/>
 <wire x1="33.6" y1="26.9875" x2="33.6" y2="25.52" width="0.254" layer="1"/>
 <wire x1="33.6" y1="25.52" x2="33.655" y2="25.465" width="0.254" layer="1"/>
 </signal>
 <signal name="N$41">
-<contactref element="Q4" pad="G1"/>
-<contactref element="R39" pad="2"/>
-<contactref element="R40" pad="2"/>
+<contactref element="Q102" pad="G1"/>
+<contactref element="R119" pad="2"/>
+<contactref element="R123" pad="2"/>
 <wire x1="57.095" y1="6.35" x2="57.095" y2="7.9375" width="0.254" layer="1"/>
 <wire x1="56.515" y1="9.245" x2="56.515" y2="8.89" width="0.254" layer="1"/>
 <wire x1="56.515" y1="8.89" x2="56.8325" y2="8.5725" width="0.254" layer="1"/>
@@ -6171,10 +6216,10 @@ Please make sure your boards conform to 
 <wire x1="56.8325" y1="8.2" x2="57.095" y2="7.9375" width="0.254" layer="1"/>
 </signal>
 <signal name="N$42">
-<contactref element="Q4" pad="D1_2"/>
-<contactref element="D19" pad="A"/>
-<contactref element="Q4" pad="D1"/>
-<contactref element="J16" pad="2"/>
+<contactref element="Q102" pad="D1_2"/>
+<contactref element="D103" pad="A"/>
+<contactref element="Q102" pad="D1"/>
+<contactref element="J114" pad="2"/>
 <wire x1="56.015" y1="10.16" x2="52.3875" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="52.3875" y1="10.16" x2="51.7525" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="51.7525" y1="10.16" x2="51.07" y2="9.4775" width="0.8128" layer="1"/>
@@ -6185,19 +6230,19 @@ Please make sure your boards conform to 
 <wire x1="55.865" y1="10.31" x2="56.015" y2="10.16" width="0.254" layer="1"/>
 </signal>
 <signal name="N$43">
-<contactref element="R41" pad="2"/>
-<contactref element="R42" pad="2"/>
-<contactref element="Q4" pad="G2"/>
+<contactref element="R120" pad="2"/>
+<contactref element="R124" pad="2"/>
+<contactref element="Q102" pad="G2"/>
 <wire x1="55.935" y1="12.7" x2="55.935" y2="12.01" width="0.254" layer="1"/>
 <wire x1="55.935" y1="12.01" x2="56.515" y2="11.43" width="0.254" layer="1"/>
 <wire x1="56.515" y1="11.43" x2="56.515" y2="11.075" width="0.254" layer="1"/>
 <wire x1="55.935" y1="14.12875" x2="55.935" y2="12.7" width="0.254" layer="1"/>
 </signal>
 <signal name="N$44">
-<contactref element="D20" pad="A"/>
-<contactref element="Q4" pad="D2_2"/>
-<contactref element="Q4" pad="D2"/>
-<contactref element="J17" pad="2"/>
+<contactref element="D104" pad="A"/>
+<contactref element="Q102" pad="D2_2"/>
+<contactref element="Q102" pad="D2"/>
+<contactref element="J115" pad="2"/>
 <wire x1="57.015" y1="10.16" x2="59.3725" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="59.3725" y1="10.16" x2="59.53125" y2="10.00125" width="0.8128" layer="1"/>
 <wire x1="59.53125" y1="10.00125" x2="59.96" y2="9.5725" width="0.8128" layer="1"/>
@@ -6208,9 +6253,9 @@ Please make sure your boards conform to 
 <wire x1="57.165" y1="10.01" x2="57.015" y2="10.16" width="0.254" layer="1"/>
 </signal>
 <signal name="N$45">
-<contactref element="R43" pad="2"/>
-<contactref element="R44" pad="2"/>
-<contactref element="Q5" pad="G1"/>
+<contactref element="R127" pad="2"/>
+<contactref element="R131" pad="2"/>
+<contactref element="Q104" pad="G1"/>
 <wire x1="74.875" y1="6.35" x2="74.875" y2="7.9375" width="0.254" layer="1"/>
 <wire x1="74.295" y1="9.245" x2="74.295" y2="8.89" width="0.254" layer="1"/>
 <wire x1="74.295" y1="8.89" x2="74.6125" y2="8.5725" width="0.254" layer="1"/>
@@ -6218,10 +6263,10 @@ Please make sure your boards conform to 
 <wire x1="74.6125" y1="8.2" x2="74.875" y2="7.9375" width="0.254" layer="1"/>
 </signal>
 <signal name="N$46">
-<contactref element="D21" pad="A"/>
-<contactref element="Q5" pad="D1_2"/>
-<contactref element="Q5" pad="D1"/>
-<contactref element="J18" pad="2"/>
+<contactref element="D107" pad="A"/>
+<contactref element="Q104" pad="D1_2"/>
+<contactref element="Q104" pad="D1"/>
+<contactref element="J118" pad="2"/>
 <wire x1="73.795" y1="10.16" x2="70.1675" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="70.1675" y1="10.16" x2="69.5325" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="69.5325" y1="10.16" x2="68.85" y2="9.4775" width="0.8128" layer="1"/>
@@ -6232,19 +6277,19 @@ Please make sure your boards conform to 
 <wire x1="73.645" y1="10.31" x2="73.795" y2="10.16" width="0.254" layer="1"/>
 </signal>
 <signal name="N$47">
-<contactref element="R45" pad="2"/>
-<contactref element="R46" pad="2"/>
-<contactref element="Q5" pad="G2"/>
+<contactref element="R128" pad="2"/>
+<contactref element="R132" pad="2"/>
+<contactref element="Q104" pad="G2"/>
 <wire x1="73.715" y1="12.7" x2="73.715" y2="12.01" width="0.254" layer="1"/>
 <wire x1="73.715" y1="12.01" x2="74.295" y2="11.43" width="0.254" layer="1"/>
 <wire x1="74.295" y1="11.43" x2="74.295" y2="11.075" width="0.254" layer="1"/>
 <wire x1="73.715" y1="14.12875" x2="73.715" y2="12.7" width="0.254" layer="1"/>
 </signal>
 <signal name="N$48">
-<contactref element="D22" pad="A"/>
-<contactref element="Q5" pad="D2_2"/>
-<contactref element="Q5" pad="D2"/>
-<contactref element="J19" pad="2"/>
+<contactref element="D108" pad="A"/>
+<contactref element="Q104" pad="D2_2"/>
+<contactref element="Q104" pad="D2"/>
+<contactref element="J119" pad="2"/>
 <wire x1="74.795" y1="10.16" x2="77.1525" y2="10.16" width="0.8128" layer="1"/>
 <wire x1="77.1525" y1="10.16" x2="77.31125" y2="10.00125" width="0.8128" layer="1"/>
 <wire x1="77.31125" y1="10.00125" x2="77.74" y2="9.5725" width="0.8128" layer="1"/>
@@ -6255,23 +6300,23 @@ Please make sure your boards conform to 
 <wire x1="74.945" y1="10.01" x2="74.795" y2="10.16" width="0.254" layer="1"/>
 </signal>
 <signal name="LED_DIM">
-<contactref element="D13" pad="C"/>
-<contactref element="D12" pad="C"/>
-<contactref element="D15" pad="C"/>
-<contactref element="D14" pad="C"/>
-<contactref element="D16" pad="C"/>
-<contactref element="D17" pad="C"/>
-<contactref element="D11" pad="C"/>
-<contactref element="D18" pad="C"/>
-<contactref element="D25" pad="C"/>
-<contactref element="D24" pad="C"/>
-<contactref element="D27" pad="C"/>
-<contactref element="D26" pad="C"/>
-<contactref element="D28" pad="C"/>
-<contactref element="D29" pad="C"/>
-<contactref element="D23" pad="C"/>
-<contactref element="D30" pad="C"/>
-<contactref element="Q6" pad="3"/>
+<contactref element="D209" pad="C"/>
+<contactref element="D208" pad="C"/>
+<contactref element="D211" pad="C"/>
+<contactref element="D210" pad="C"/>
+<contactref element="D212" pad="C"/>
+<contactref element="D213" pad="C"/>
+<contactref element="D207" pad="C"/>
+<contactref element="D214" pad="C"/>
+<contactref element="D217" pad="C"/>
+<contactref element="D216" pad="C"/>
+<contactref element="D219" pad="C"/>
+<contactref element="D218" pad="C"/>
+<contactref element="D220" pad="C"/>
+<contactref element="D221" pad="C"/>
+<contactref element="D215" pad="C"/>
+<contactref element="D222" pad="C"/>
+<contactref element="Q202" pad="3"/>
 <wire x1="17.387" y1="31.75" x2="17.387" y2="33.5795" width="0.254" layer="1"/>
 <wire x1="17.387" y1="33.5795" x2="17.4625" y2="33.655" width="0.254" layer="1"/>
 <via x="17.4625" y="33.655" extent="1-16" drill="0.3048" diameter="0.254"/>
@@ -6352,57 +6397,57 @@ Please make sure your boards conform to 
 <wire x1="70.17525" y1="33.655" x2="70.1675" y2="33.655" width="0.254" layer="1"/>
 </signal>
 <signal name="N$49">
-<contactref element="D23" pad="A"/>
-<contactref element="R47" pad="2"/>
+<contactref element="D215" pad="A"/>
+<contactref element="R215" pad="2"/>
 <wire x1="77.863" y1="31.75" x2="77.863" y2="30.4595" width="0.254" layer="1"/>
 <wire x1="77.863" y1="30.4595" x2="78.16" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="N$50">
-<contactref element="D24" pad="A"/>
-<contactref element="R48" pad="2"/>
+<contactref element="D216" pad="A"/>
+<contactref element="R216" pad="2"/>
 <wire x1="68.973" y1="31.75" x2="68.973" y2="30.4595" width="0.254" layer="1"/>
 <wire x1="68.973" y1="30.4595" x2="69.27" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="N$51">
-<contactref element="D25" pad="A"/>
-<contactref element="R49" pad="2"/>
+<contactref element="D217" pad="A"/>
+<contactref element="R217" pad="2"/>
 <wire x1="60.083" y1="31.75" x2="60.083" y2="30.4595" width="0.254" layer="1"/>
 <wire x1="60.083" y1="30.4595" x2="60.38" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="N$52">
-<contactref element="D26" pad="A"/>
-<contactref element="R50" pad="2"/>
+<contactref element="D218" pad="A"/>
+<contactref element="R218" pad="2"/>
 <wire x1="51.193" y1="31.75" x2="51.193" y2="30.4595" width="0.254" layer="1"/>
 <wire x1="51.193" y1="30.4595" x2="51.49" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="N$53">
-<contactref element="D27" pad="A"/>
-<contactref element="R51" pad="2"/>
+<contactref element="D219" pad="A"/>
+<contactref element="R219" pad="2"/>
 <wire x1="42.303" y1="31.75" x2="42.303" y2="30.4595" width="0.254" layer="1"/>
 <wire x1="42.303" y1="30.4595" x2="42.6" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="N$54">
-<contactref element="D28" pad="A"/>
-<contactref element="R52" pad="2"/>
+<contactref element="D220" pad="A"/>
+<contactref element="R220" pad="2"/>
 <wire x1="33.413" y1="31.75" x2="33.413" y2="30.4595" width="0.254" layer="1"/>
 <wire x1="33.413" y1="30.4595" x2="33.71" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="N$55">
-<contactref element="D29" pad="A"/>
-<contactref element="R53" pad="2"/>
+<contactref element="D221" pad="A"/>
+<contactref element="R221" pad="2"/>
 <wire x1="24.523" y1="31.75" x2="24.523" y2="30.4595" width="0.254" layer="1"/>
 <wire x1="24.523" y1="30.4595" x2="24.82" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="N$56">
-<contactref element="D30" pad="A"/>
-<contactref element="R54" pad="2"/>
+<contactref element="D222" pad="A"/>
+<contactref element="R222" pad="2"/>
 <wire x1="15.633" y1="31.75" x2="15.633" y2="30.4595" width="0.254" layer="1"/>
 <wire x1="15.633" y1="30.4595" x2="15.93" y2="30.1625" width="0.254" layer="1"/>
 </signal>
 <signal name="LED_DIM_SWITCH">
-<contactref element="Q6" pad="1"/>
-<contactref element="R55" pad="2"/>
-<contactref element="U2" pad="10"/>
+<contactref element="Q202" pad="1"/>
+<contactref element="R223" pad="2"/>
+<contactref element="U202" pad="10"/>
 <wire x1="81.335" y1="16.1925" x2="81.28" y2="16.1925" width="0.254" layer="1"/>
 <wire x1="81.28" y1="16.1925" x2="81.12125" y2="16.35125" width="0.254" layer="1"/>
 <wire x1="81.12125" y1="16.35125" x2="81.12125" y2="17.57625" width="0.254" layer="1"/>
@@ -6425,11 +6470,11 @@ Please make sure your boards conform to 
 <signal name="N$57">
 </signal>
 <signal name="VIN_RECTIFIED">
-<contactref element="C9" pad="1"/>
-<contactref element="U11" pad="5"/>
-<contactref element="U11" pad="4"/>
-<contactref element="Q3" pad="2"/>
-<contactref element="D5" pad="C"/>
+<contactref element="C205" pad="1"/>
+<contactref element="U201" pad="5"/>
+<contactref element="U201" pad="4"/>
+<contactref element="Q201" pad="2"/>
+<contactref element="D201" pad="C"/>
 <wire x1="15.4375" y1="23.1775" x2="15.4375" y2="24.835" width="0.6096" layer="1"/>
 <wire x1="15.4375" y1="24.835" x2="15.2375" y2="25.035" width="0.6096" layer="1"/>
 <wire x1="15.4375" y1="23.1775" x2="16.1925" y2="23.1775" width="0.6096" layer="1"/>
@@ -6443,7 +6488,7 @@ Please make sure your boards conform to 
 <wire x1="20.885" y1="24.765" x2="20.885" y2="23.815" width="0.6096" layer="1"/>
 <wire x1="20.585" y1="22.225" x2="20.585" y2="23.515" width="0.6096" layer="1"/>
 <wire x1="20.585" y1="23.515" x2="20.885" y2="23.815" width="0.6096" layer="1"/>
-<contactref element="U1" pad="2"/>
+<contactref element="U101" pad="2"/>
 <wire x1="15.2375" y1="25.035" x2="15.2375" y2="28.26" width="0.508" layer="1"/>
 <wire x1="15.2375" y1="28.26" x2="14.76375" y2="28.73375" width="0.508" layer="1"/>
 <wire x1="14.76375" y1="28.73375" x2="13.36375" y2="28.73375" width="0.508" layer="1"/>