Generated by EAGLE CAM Processor 7.5.0

Photoplotter Info File: C:/DEV_AREA/hydrobot/relaydrive-hardware/CAM/RelayDrive.gpi

 Date              : 6/15/2017 10:57 AM
 Plotfile          : C:/DEV_AREA/hydrobot/relaydrive-hardware/CAM/RelayDrive.GTL
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch

Parameter settings:

 Emulate Apertures : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.5
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      draw      0.0000inch              48
 D11      rectangle 0.0354inch x 0.0335inch    10
 D12      rectangle 0.1457inch x 0.0472inch     2
 D13      rectangle 0.0276inch x 0.0354inch    28
 D14      rectangle 0.0315inch x 0.0472inch     2
 D15      rectangle 0.0472inch x 0.0315inch     4
 D16      rectangle 0.0248inch x 0.0327inch    22
 D17      draw      0.0118inch              38
 D18      rectangle 0.0354inch x 0.0276inch     2
 D19      rectangle 0.0500inch x 0.0250inch     8
 D20      rectangle 0.0315inch x 0.0248inch     6
 D21      rectangle 0.0315inch x 0.0354inch     6
 D22      rectangle 0.0335inch x 0.0354inch   100
 D23      rectangle 0.0315inch x 0.0394inch     8
 D24      square    0.0165inch              24
 D25      rectangle 0.0350inch x 0.0320inch     4
 D26      rectangle 0.0571inch x 0.0197inch    16
 D27      rectangle 0.0197inch x 0.0571inch    16
 D28      rectangle 0.0472inch x 0.0551inch     4
 D29      rectangle 0.0197inch x 0.0394inch    32
 D30      rectangle 0.0709inch x 0.0394inch     2
 D31      draw      0.0413inch              48
 D32      draw      0.0100inch            8038
 D33      draw      0.0240inch              34
 D34      draw      0.0160inch              15
 D35      draw      0.0200inch               5
 D36      round     0.0240inch             360
 D37      draw      0.0320inch              60
 D38      draw      0.1350inch               1
 D39      draw      0.0420inch               2
 D40      draw      0.0450inch               2
 D41      draw      0.0400inch              37