canable-pro Changeset - 6e5f0d579a80 · protofusion repositories

Changeset - 6e5f0d579a80

Parent rev.

Child rev.

[Not reviewed]

default

0 2 0

Ethan Zonca - 7 years ago 2018-09-22 16:39:28
ez@ethanzonca.com

Update for prod: switch to boss USB connector and tweak silk

2 files changed with 75 insertions and 21 deletions:

canable-pro.brd

canable-pro.sch

0 comments (0 inline, 0 general)

canable-pro.brd

➞

Show inline comments

@@ @@ -21,13 +21,13 @@ @@
 <layer number="10" name="Route10" color="1" fill="7" visible="no" active="no"/>
 <layer number="11" name="Route11" color="4" fill="7" visible="no" active="no"/>
 <layer number="12" name="Route12" color="1" fill="5" visible="no" active="no"/>
 <layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
 <layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
 <layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="22" name="bPlace" color="7" fill="1" visible="no" active="yes"/>
@@ @@ -207,15 +207,15 @@ @@
 <text x="4.1275" y="42.70375" size="0.8128" layer="21" ratio="16" rot="SR180">CANH</text>
 <text x="8.09625" y="42.70375" size="0.8128" layer="21" ratio="16" rot="SR180">CANL</text>
 <text x="10.95375" y="42.70375" size="0.8128" layer="21" ratio="16" rot="SR180">GND</text>
 <text x="11.7475" y="46.51375" size="0.8128" layer="21" ratio="16" rot="R270">TERM</text>
 <text x="12.85875" y="4.28625" size="0.8128" layer="21" ratio="16" rot="SR0">Boot</text>
 <text x="1.11125" y="0" size="1.016" layer="22" ratio="16" rot="SMR90">canable.io</text>
 <text x="0.9525" y="48.73625" size="0.8128" layer="22" ratio="16" rot="SMR180">CANH</text>
 <text x="4.60375" y="48.73625" size="0.8128" layer="22" ratio="16" rot="SMR180">CANL</text>
 <text x="8.73125" y="48.73625" size="0.8128" layer="22" ratio="16" rot="SMR180">GND</text>
 <text x="0.9525" y="49.2125" size="0.8128" layer="22" ratio="16" rot="SMR180">CANH</text>
 <text x="4.60375" y="49.2125" size="0.8128" layer="22" ratio="16" rot="SMR180">CANL</text>
 <text x="8.73125" y="49.2125" size="0.8128" layer="22" ratio="16" rot="SMR180">GND</text>
 <text x="3.81" y="0.15875" size="0.8128" layer="21" ratio="16" rot="R90">Pwr</text>
 <text x="13.335" y="0.15875" size="0.8128" layer="21" ratio="16" rot="R90">Act</text>
 <text x="1.42875" y="27.14625" size="1.016" layer="22" ratio="16" rot="SMR90">protofusion labs</text>
 <circle x="1.70875" y="26.08775" radius="0.127" width="0.254" layer="21"/>
 <dimension x1="15.875" y1="38.1" x2="0.635" y2="36.195" x3="8.255" y3="43.18" textsize="1.778" layer="114" dtype="horizontal" unit="inch"/>
 <hole x="19.05" y="47.625" drill="3.175"/>
@@ @@ -903,13 +903,25 @@ You are welcome to use this library for @@
 <smd name="4" x="0.65" y="1.27" dx="0.4" dy="1.35" layer="1" rot="R180"/>
 <smd name="2" x="-0.65" y="1.27" dx="0.4" dy="1.35" layer="1" rot="R180"/>
 <smd name="1" x="-1.3" y="1.27" dx="0.4" dy="1.35" layer="1" rot="R180"/>
 <smd name="5" x="1.3" y="1.27" dx="0.4" dy="1.35" layer="1" rot="R180"/>
 <smd name="S3" x="-3.2" y="1.27" dx="1.4" dy="1.6" layer="1" rot="R90"/>
 <smd name="S4" x="3.2" y="1.27" dx="1.4" dy="1.6" layer="1" rot="R90"/>
 <text x="-5.08" y="2.7" size="0.8128" layer="25" font="vector" ratio="16">&gt;NAME</text>
 <text x="-5.08" y="2.7" size="1.016" layer="25" font="vector" ratio="16">&gt;NAME</text>
 <wire x1="-3.55" y1="-1.05" x2="-3.55" y2="-1.75" width="0.01" layer="20"/>
 <wire x1="-3.55" y1="-1.75" x2="-3.3" y2="-2" width="0.01" layer="20" curve="90"/>
 <wire x1="-3.3" y1="-2" x2="-3.05" y2="-1.75" width="0.01" layer="20" curve="90"/>
 <wire x1="-3.05" y1="-1.75" x2="-3.05" y2="-1.05" width="0.01" layer="20"/>
 <wire x1="-3.05" y1="-1.05" x2="-3.3" y2="-0.8" width="0.01" layer="20" curve="90"/>
 <wire x1="-3.3" y1="-0.8" x2="-3.55" y2="-1.05" width="0.01" layer="20" curve="90"/>
 <wire x1="3.05" y1="-1.05" x2="3.05" y2="-1.75" width="0.01" layer="20"/>
 <wire x1="3.05" y1="-1.75" x2="3.3" y2="-2" width="0.01" layer="20" curve="90"/>
 <wire x1="3.3" y1="-2" x2="3.55" y2="-1.75" width="0.01" layer="20" curve="90"/>
 <wire x1="3.55" y1="-1.75" x2="3.55" y2="-1.05" width="0.01" layer="20"/>
 <wire x1="3.55" y1="-1.05" x2="3.3" y2="-0.8" width="0.01" layer="20" curve="90"/>
 <wire x1="3.3" y1="-0.8" x2="3.05" y2="-1.05" width="0.01" layer="20" curve="90"/>
 <smd name="S5" x="-1.2" y="-1.405" dx="1.9" dy="1.9" layer="1"/>
 <smd name="S6" x="1.2" y="-1.405" dx="1.9" dy="1.9" layer="1"/>
 <smd name="S1" x="-3.3" y="-1.4" dx="0.9" dy="1.6" layer="1" roundness="100" rot="R180"/>
 <smd name="S2" x="3.3" y="-1.4" dx="0.9" dy="1.6" layer="1" roundness="100" rot="R180"/>
 <smd name="S7" x="-3.3" y="-1.4" dx="0.9" dy="1.6" layer="16" roundness="100" rot="R180" cream="no"/>
 <smd name="S8" x="3.3" y="-1.4" dx="0.9" dy="1.6" layer="16" roundness="100" rot="R180" cream="no"/>
@@ @@ -2764,14 +2776,19 @@ You are welcome to use this library for @@
 </element>
 <element name="C12" library="SparkFun-Capacitors" package="1206" value="MF-CAP-1206-10uF" x="13.335" y="21.9075" smashed="yes">
 <attribute name="NAME" x="13.335" y="23.0505" size="0.6096" layer="104" font="vector" ratio="20" align="bottom-center"/>
 <attribute name="PROD_ID" value="CAP-10057" x="13.335" y="21.9075" size="1.778" layer="27" display="off"/>
 <attribute name="VALUE" x="13.335" y="20.7645" size="0.6096" layer="27" font="vector" ratio="20" align="top-center"/>
 </element>
 <element name="J3" library="MF_Connectors" package="MICROUSB-RIGHT" value="" x="8.255" y="1.905" smashed="yes">
 <element name="J3" library="MF_Connectors" package="MICROUSB-RIGHT" value="MF-CON-MICROUSB-RIGHT" x="8.255" y="1.905" smashed="yes">
 <attribute name="HOUSEPART" value="YES" x="8.255" y="1.905" size="1.778" layer="27" display="off"/>
 <attribute name="MPN" value="MF-CON-MICROUSB-RIGHT" x="8.255" y="1.905" size="1.778" layer="27" display="off"/>
 <attribute name="NAME" x="3.175" y="4.605" size="0.8128" layer="104" font="vector" ratio="16"/>
 <attribute name="POPULATE" value="1" x="8.255" y="1.905" size="1.778" layer="27" display="off"/>
 <attribute name="URL" value="https://factory.macrofab.com/part/MF-CON-MICROUSB-RIGHT" x="8.255" y="1.905" size="1.778" layer="27" display="off"/>
 <attribute name="VALUE" value="MF-CON-MICROUSB-RIGHT" x="8.255" y="1.905" size="1.778" layer="27" display="off"/>
 </element>
 <element name="U$2" library="Protofusion-logos" package="CANABLE-PRO-1.0" value="" x="4.28625" y="6.35" rot="MR90"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="U2" pad="2"/>
@@ @@ -2843,12 +2860,26 @@ You are welcome to use this library for @@
 <via x="2.54" y="20.32" extent="1-16" drill="0.3048"/>
 <via x="5.715" y="18.0975" extent="1-16" drill="0.3048"/>
 <via x="3.96875" y="23.8125" extent="1-16" drill="0.3048"/>
 <via x="6.19125" y="20.955" extent="1-16" drill="0.3048"/>
 <via x="9.445625" y="23.098125" extent="1-16" drill="0.3048"/>
 <via x="8.016875" y="22.939375" extent="1-16" drill="0.3048"/>
 <wire x1="4.955" y1="1.78" x2="4.955" y2="0.505" width="0.4064" layer="1"/>
 <wire x1="4.955" y1="1.78" x2="5.08" y2="1.905" width="0.4064" layer="1"/>
 <wire x1="4.955" y1="0.505" x2="3.81" y2="0.505" width="0.4064" layer="1"/>
 <wire x1="3.81" y1="0.505" x2="3.81" y2="0.635" width="0.4064" layer="1"/>
 <wire x1="4.955" y1="0.505" x2="6.35" y2="0.505" width="0.4064" layer="1"/>
 <wire x1="6.35" y1="0.505" x2="6.35" y2="0.635" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="0.505" x2="11.555" y2="0.505" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="0.505" x2="10.16" y2="0.635" width="0.4064" layer="1"/>
 <wire x1="10.16" y1="0.635" x2="9.455" y2="0.635" width="0.4064" layer="1"/>
 <wire x1="9.455" y1="0.635" x2="9.455" y2="0.5" width="0.4064" layer="1"/>
 <wire x1="11.555" y1="0.505" x2="12.7" y2="0.505" width="0.4064" layer="1"/>
 <wire x1="12.7" y1="0.505" x2="12.7" y2="0.635" width="0.4064" layer="1"/>
 <wire x1="11.555" y1="0.505" x2="11.555" y2="1.905" width="0.4064" layer="1"/>
 <wire x1="11.555" y1="1.905" x2="11.43" y2="1.905" width="0.4064" layer="1"/>
 </signal>
 <signal name="3.3V">
 <contactref element="U2" pad="5"/>
 <contactref element="C7" pad="1"/>
 <contactref element="U1" pad="1"/>
 <contactref element="U1" pad="24"/>
@@ @@ -3307,27 +3338,27 @@ You are welcome to use this library for @@
 </signal>
 </signals>
 <errors>
 <approved hash="20,1,4ab189554ca8f1ea"/>
 <approved hash="20,1,27aecabbdc26d9f8"/>
 <approved hash="20,1,5e41f8626f40ec3b"/>
 <approved hash="3,16,23a1121312242396"/>
 <approved hash="20,16,d70ac28ef6106519"/>
 <approved hash="20,16,27aecabbdc26d9f8"/>
 <approved hash="20,16,4ab189554ca8f1ea"/>
 <approved hash="3,1,28991a0b1bf8296a"/>
 <approved hash="20,1,95a4c74ba5e03029"/>
 <approved hash="3,1,23a1121312242396"/>
 <approved hash="20,1,d70ac28ef6106519"/>
 <approved hash="20,1,95a4c74ba5e03029"/>
 <approved hash="3,1,28e11a731a6428f6"/>
 <approved hash="20,16,95a4c74ba5e03029"/>
 <approved hash="3,1,28991a0b1bf8296a"/>
 <approved hash="3,16,28e11a731a6428f6"/>
 <approved hash="3,1,23a9121b1228239a"/>
 <approved hash="3,16,23a9121b1228239a"/>
 <approved hash="3,16,23a1121312242396"/>
 <approved hash="20,16,d70ac28ef6106519"/>
 <approved hash="20,16,95a4c74ba5e03029"/>
 <approved hash="3,1,1049057b0568105a"/>
 <approved hash="3,16,28991a0b1bf8296a"/>
 <approved hash="3,16,28e11a731a6428f6"/>
 <approved hash="3,1,28e11a731a6428f6"/>
 <approved hash="3,1,1049057b0568105a"/>
 </errors>
 </board>
 </drawing>
 <compatibility>
 <note version="8.2" severity="warning">
 Since Version 8.2, EAGLE supports online libraries. The ids

canable-pro.sch

➞

Show inline comments

@@ @@ -3995,13 +3995,25 @@ You are welcome to use this library for @@
 <smd name="4" x="0.65" y="1.27" dx="0.4" dy="1.35" layer="1" rot="R180"/>
 <smd name="2" x="-0.65" y="1.27" dx="0.4" dy="1.35" layer="1" rot="R180"/>
 <smd name="1" x="-1.3" y="1.27" dx="0.4" dy="1.35" layer="1" rot="R180"/>
 <smd name="5" x="1.3" y="1.27" dx="0.4" dy="1.35" layer="1" rot="R180"/>
 <smd name="S3" x="-3.2" y="1.27" dx="1.4" dy="1.6" layer="1" rot="R90"/>
 <smd name="S4" x="3.2" y="1.27" dx="1.4" dy="1.6" layer="1" rot="R90"/>
 <text x="-5.08" y="2.7" size="0.8128" layer="25" font="vector" ratio="16">&gt;NAME</text>
 <text x="-5.08" y="2.7" size="1.016" layer="25" font="vector" ratio="16">&gt;NAME</text>
 <wire x1="-3.55" y1="-1.05" x2="-3.55" y2="-1.75" width="0.01" layer="20"/>
 <wire x1="-3.55" y1="-1.75" x2="-3.3" y2="-2" width="0.01" layer="20" curve="90"/>
 <wire x1="-3.3" y1="-2" x2="-3.05" y2="-1.75" width="0.01" layer="20" curve="90"/>
 <wire x1="-3.05" y1="-1.75" x2="-3.05" y2="-1.05" width="0.01" layer="20"/>
 <wire x1="-3.05" y1="-1.05" x2="-3.3" y2="-0.8" width="0.01" layer="20" curve="90"/>
 <wire x1="-3.3" y1="-0.8" x2="-3.55" y2="-1.05" width="0.01" layer="20" curve="90"/>
 <wire x1="3.05" y1="-1.05" x2="3.05" y2="-1.75" width="0.01" layer="20"/>
 <wire x1="3.05" y1="-1.75" x2="3.3" y2="-2" width="0.01" layer="20" curve="90"/>
 <wire x1="3.3" y1="-2" x2="3.55" y2="-1.75" width="0.01" layer="20" curve="90"/>
 <wire x1="3.55" y1="-1.75" x2="3.55" y2="-1.05" width="0.01" layer="20"/>
 <wire x1="3.55" y1="-1.05" x2="3.3" y2="-0.8" width="0.01" layer="20" curve="90"/>
 <wire x1="3.3" y1="-0.8" x2="3.05" y2="-1.05" width="0.01" layer="20" curve="90"/>
 <smd name="S5" x="-1.2" y="-1.405" dx="1.9" dy="1.9" layer="1"/>
 <smd name="S6" x="1.2" y="-1.405" dx="1.9" dy="1.9" layer="1"/>
 <smd name="S1" x="-3.3" y="-1.4" dx="0.9" dy="1.6" layer="1" roundness="100" rot="R180"/>
 <smd name="S2" x="3.3" y="-1.4" dx="0.9" dy="1.6" layer="1" roundness="100" rot="R180"/>
 <smd name="S7" x="-3.3" y="-1.4" dx="0.9" dy="1.6" layer="16" roundness="100" rot="R180" cream="no"/>
 <smd name="S8" x="3.3" y="-1.4" dx="0.9" dy="1.6" layer="16" roundness="100" rot="R180" cream="no"/>
@@ @@ -4023,13 +4035,13 @@ You are welcome to use this library for @@
 <wire x1="-3.8" y1="-7" x2="-3.8" y2="-8.575" width="0.127" layer="21"/>
 <wire x1="-3.8" y1="-8.575" x2="3.8" y2="-8.575" width="0.127" layer="21"/>
 <wire x1="-2.25" y1="0.625" x2="-3.05" y2="0.625" width="0.127" layer="21"/>
 <wire x1="2.25" y1="0.625" x2="3.05" y2="0.625" width="0.127" layer="21"/>
 <wire x1="3.8" y1="-7" x2="3.8" y2="-8.575" width="0.127" layer="21"/>
 <wire x1="3.8" y1="-1.75" x2="3.8" y2="-4" width="0.127" layer="21"/>
-<text x="-3.8" y="1.5" size="0.8128" layer="25" font="vector" ratio="16">&gt;NAME</text>
+<text x="-3.8" y="1.5" size="1.016" layer="25" font="vector" ratio="16">&gt;NAME</text>
 </package>
 </packages>
 <symbols>
 <symbol name="USB_5PIN">
 <description>&lt;b&gt;Description:&lt;/b&gt; Symbol for 5-Pin USB connectors.&lt;br&gt;</description>
 <pin name="5V" x="7.62" y="5.08" visible="off" length="short" direction="pwr" rot="R180"/>
@@ @@ -4038,14 +4050,14 @@ You are welcome to use this library for @@
 <pin name="GND" x="7.62" y="-5.08" visible="off" length="short" direction="pwr" rot="R180"/>
 <text x="0" y="6.096" size="1.016" layer="97" font="vector" align="bottom-center">USB PORT</text>
 <wire x1="5.08" y1="7.62" x2="5.08" y2="-10.16" width="0.127" layer="94"/>
 <wire x1="5.08" y1="-10.16" x2="-5.08" y2="-10.16" width="0.127" layer="94"/>
 <wire x1="-5.08" y1="-10.16" x2="-5.08" y2="7.62" width="0.127" layer="94"/>
 <wire x1="-5.08" y1="7.62" x2="5.08" y2="7.62" width="0.127" layer="94"/>
 <text x="-5.08" y="12.7" size="1.016" layer="95" font="vector" align="top-left">&gt;NAME</text>
 <text x="-5.08" y="10.16" size="1.016" layer="96" font="vector">&gt;VALUE</text>
 <text x="-5.08" y="11.43" size="1.016" layer="95" font="vector" align="top-left">&gt;NAME</text>
 <text x="-5.08" y="8.89" size="1.016" layer="96" font="vector">&gt;VALUE</text>
 <pin name="ID" x="7.62" y="-2.54" visible="off" length="short" rot="R180"/>
 <pin name="SLD" x="7.62" y="-7.62" visible="off" length="short" direction="pwr" rot="R180"/>
 <text x="4.572" y="5.08" size="1.016" layer="97" font="vector" align="center-right">5V</text>
 <text x="4.572" y="2.54" size="1.016" layer="97" font="vector" align="center-right">D-</text>
 <text x="4.572" y="0" size="1.016" layer="97" font="vector" align="center-right">D+</text>
 <text x="4.572" y="-2.54" size="1.016" layer="97" font="vector" align="center-right">ID</text>
@@ @@ -4106,26 +4118,37 @@ You are welcome to use this library for @@
 <connect gate="G$1" pin="D-" pad="2"/>
 <connect gate="G$1" pin="GND" pad="5"/>
 <connect gate="G$1" pin="ID" pad="4"/>
 <connect gate="G$1" pin="SLD" pad="S1 S2 S3 S4 S5 S6"/>
 </connects>
 <technologies>
 <technology name=""/>
 <technology name="">
 <attribute name="HOUSEPART" value="YES" constant="no"/>
 <attribute name="MPN" value="MF-CON-MICROUSB-RIGHT" constant="no"/>
 <attribute name="POPULATE" value="1" constant="no"/>
 <attribute name="URL" value="https://factory.macrofab.com/part/MF-CON-MICROUSB-RIGHT" constant="no"/>
 <attribute name="VALUE" value="MF-CON-MICROUSB-RIGHT" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="_MINI_RIGHT" package="MINIUSB-RIGHT">
 <connects>
 <connect gate="G$1" pin="5V" pad="1"/>
 <connect gate="G$1" pin="D+" pad="3"/>
 <connect gate="G$1" pin="D-" pad="2"/>
 <connect gate="G$1" pin="GND" pad="5"/>
 <connect gate="G$1" pin="ID" pad="4"/>
 <connect gate="G$1" pin="SLD" pad="S1 S2 S3 S4"/>
 </connects>
 <technologies>
 <technology name=""/>
 <technology name="">
 <attribute name="HUOSEPART" value="NO" constant="no"/>
 <attribute name="MPN" value="" constant="no"/>
 <attribute name="POPULATE" value="1" constant="no"/>
 <attribute name="URL" value="http://www.4uconnector.com/online/object/4udrawing/20236.pdf" constant="no"/>
 </technology>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
@@ @@ -4232,13 +4255,13 @@ You are welcome to use this library for @@
 <part name="D1" library="diode" library_urn="urn:adsk.eagle:library:210" deviceset="PESD1CAN" device="" package3d_urn="urn:adsk.eagle:package:43389/2"/>
 <part name="GND3" library="SLAT-Symbols" deviceset="GND_B" device=""/>
 <part name="GND5" library="SLAT-Symbols" deviceset="GND_B" device=""/>
 <part name="FRAME2" library="SparkFun-Aesthetics" deviceset="FRAME-A4L" device=""/>
 <part name="C16" library="SparkFun-Capacitors" deviceset="10UF" device="-1206-6.3V-20%" value="MF-CAP-1206-10uF"/>
 <part name="C12" library="SparkFun-Capacitors" deviceset="10UF" device="-1206-6.3V-20%" value="MF-CAP-1206-10uF"/>
 <part name="J3" library="MF_Connectors" deviceset="USB" device="_MICRO_RIGHT"/>
+<part name="J3" library="MF_Connectors" deviceset="USB" device="_MICRO_RIGHT" value="MF-CON-MICROUSB-RIGHT"/>
 <part name="U$4" library="Protofusion-symbols" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <text x="141.732" y="103.632" size="5.08" layer="113">Power Supply</text>

0 comments (0 inline, 0 general)