seniordesign-firmware Changeset - 02b6a488f4ee

Changeset - 02b6a488f4ee

Parent rev.

Child rev.

[Not reviewed]

default

0 5 0

ethanzonca@CL-SEC241-08.cedarville.edu - 12 years ago 2012-11-01 14:53:54
ethanzonca@CL-SEC241-08.cedarville.edu

Work on AFSK, minor mods to slave

5 files changed with 113 insertions and 97 deletions:

master/master/lib/afsk.c

master/master/lib/afsk.h

master/master/master.c

master/master/master.cproj

slave2/slave/slave/slave.c

0 comments (0 inline, 0 general)

master/master/lib/afsk.c

➞

Show inline comments

@@ @@ -5,18 +5,6 @@ @@
  *  Author: ethanzonca
  */
 /*
  * Master Firmware
+ *
  * Wireless Observational Modular Aerial Network
+ *
  * Ethan Zonca
  * Matthew Kanning
  * Kyle Ripperger
  * Matthew Kroening
+ *
  */
 #define F_CPU 11059200
 #include <stdint.h>
@@ @@ -55,7 +43,7 @@ PROGMEM extern const uint8_t afsk_sine_t @@
 , 116, 118, 119, 121, 122, 124, 125
 };
 inline uint8_t afsk_read_sample(int phase)
+static inline uint8_t afsk_read_sample(int phase)
+{
   return pgm_read_byte_near(afsk_sine_table + phase);
+}
@@ @@ -64,51 +52,6 @@ volatile uint16_t phase = 10; @@
 volatile uint16_t phasedelta = 3300;
 extern const uint16_t TABLE_SIZE = sizeof(afsk_sine_table);
 void afsk_setup() {
   // Source timer2 from clkIO (datasheet p.164)
   ASSR &= ~(_BV(EXCLK) | _BV(AS2));
   // Set fast PWM mode with TOP = 0xff: WGM22:0 = 3  (p.150)
   TCCR2A |= _BV(WGM21) | _BV(WGM20);
   TCCR2B &= ~_BV(WGM22);
   // Do non-inverting PWM on pin OC2B (arduino pin 3) (p.159).
   // OC2A (arduino pin 11) stays in normal port operation:
   // COM2B1=1, COM2B0=0, COM2A1=0, COM2A0=0
   TCCR2A = (TCCR2A | _BV(COM2B1)) & ~(_BV(COM2B0) | _BV(COM2A1) | _BV(COM2A0));
   // No prescaler (p.162)
   TCCR2B = (TCCR2B & ~(_BV(CS22) | _BV(CS21))) | _BV(CS20);
   // Enable interrupt when TCNT2 reaches TOP (0xFF) (p.151, 163)
 	//TIMSK2 |= _BV(TOIE2);
 	TIMSK2 |= 0b00000001;
 	// Initialize PORTA
 	DDRA = 0xff;
 	PORTA = 0x00;
 	DDRD = 0xff;
 	PORTD = 0xff;
 	// todo: init radio, maybe in main
 	sei();
+}
 void afsk_test() {
 	uint8_t flap[26] = {"abcdefghijklmnopqrstuvwxyz"};
 	afsk_send(flap, sizeof(flap)*8);
 	afsk_start();
 	while(afsk_busy());
 	_delay_ms(500);
+}
 // constants
 #define MODEM_CLOCK_RATE F_CPU
 #define PLAYBACK_RATE MODEM_CLOCK_RATE / 256  // Fast PWM
@@ @@ -136,41 +79,22 @@ volatile unsigned int afsk_packet_size = @@
 volatile const uint8_t *afsk_packet;
 void afsk_send(const uint8_t *buffer, int len)
+{
 	afsk_packet_size = len;
 	afsk_packet = buffer;
+}
 int afsk_busy()
+{
 	return go;
 void afsk_ptt_off() {
 	// turn ptt off
+}
 void afsk_start()
+{
 	phasedelta = PHASE_DELTA_1200;
 	phase = 0;
 	packet_pos = 0;
 	current_sample_in_baud = 0;
 	go = true;
 	// Key the radio
 	afsk_ptt_on();
 	// Start transmission
 	afsk_timer_start();
 void afsk_ptt_on() {
 	// turn the ptt on... possibly delay based on spec
+}
 afsk_ptt_off() {
+}
 afsk_ptt_on() {
+}
 ISR(TIMER2_OVF_vect)
@@ @@ -235,3 +159,78 @@ void afsk_timer_stop() @@
 	// Disable playback interrupt
 	TIMSK2 &= ~_BV(TOIE2);
+}
 // External
 void afsk_start()
+{
 	phasedelta = PHASE_DELTA_1200;
 	phase = 0;
 	packet_pos = 0;
 	current_sample_in_baud = 0;
 	go = true;
 	// Key the radio
 	afsk_ptt_on();
 	// Start transmission
 	afsk_timer_start();
+}
 int afsk_busy()
+{
 	return go;
+}
 void afsk_send(const uint8_t *buffer, int len)
+{
 	afsk_packet_size = len;
 	afsk_packet = buffer;
+}
 void afsk_setup() {
 	// Source timer2 from clkIO (datasheet p.164)
 	ASSR &= ~(_BV(EXCLK) | _BV(AS2));
 	// Set fast PWM mode with TOP = 0xff: WGM22:0 = 3  (p.150)
 	TCCR2A |= _BV(WGM21) | _BV(WGM20);
 	TCCR2B &= ~_BV(WGM22);
 	// Do non-inverting PWM on pin OC2B (arduino pin 3) (p.159).
 	// OC2A (arduino pin 11) stays in normal port operation:
 	// COM2B1=1, COM2B0=0, COM2A1=0, COM2A0=0
 	TCCR2A = (TCCR2A | _BV(COM2B1)) & ~(_BV(COM2B0) | _BV(COM2A1) | _BV(COM2A0));
 	// No prescaler (p.162)
 	TCCR2B = (TCCR2B & ~(_BV(CS22) | _BV(CS21))) | _BV(CS20);
 	// Enable interrupt when TCNT2 reaches TOP (0xFF) (p.151, 163)
 	//TIMSK2 |= _BV(TOIE2);
 	TIMSK2 |= 0b00000001;
 	// Initialize PORTA
 	DDRA = 0xff;
 	PORTA = 0x00;
 	DDRD = 0xff;
 	PORTD = 0xff;
 	// todo: init radio, maybe in main
 	sei();
+}
 void afsk_test() {
 	uint8_t flap[26] = {"abcdefghijklmnopqrstuvwxyz"};
 	afsk_send(flap, sizeof(flap)*8);
 	afsk_start();
 	while(afsk_busy());
 	_delay_ms(500);
+}

master/master/lib/afsk.h

➞

Show inline comments

@@ @@ -11,7 +11,8 @@ @@
 void afsk_setup();
 void afsk_test();
 void afsk_send(const uint8_t *buffer, int len);
 int afsk_busy();
 void afsk_start();
 void afsk_stop();
 #endif /* AFSK_H_ */
@@ \ No newline at end of file @@

master/master/master.c

➞

Show inline comments

 /*
  * master.c
  * Master Firmware
+ *
  * Wireless Observational Modular Aerial Network
+ *
  * Created: 10/25/2012 2:48:04 PM
  *  Author: mkanning
  * Ethan Zonca
  * Matthew Kanning
  * Kyle Ripperger
  * Matthew Kroening
+ *
  */

master/master/master.cproj

➞

Show inline comments

@@ @@ -120,6 +120,12 @@ @@
     <Compile Include="lib\afsk.h">
       <SubType>compile</SubType>
     </Compile>
     <Compile Include="lib\ax25.c">
       <SubType>compile</SubType>
     </Compile>
     <Compile Include="lib\ax25.h">
       <SubType>compile</SubType>
     </Compile>
     <Compile Include="lib\led.c">
       <SubType>compile</SubType>
     </Compile>

slave2/slave/slave/slave.c

➞

Show inline comments

 /*
  * slave.c
  * Slave Firmware
+ *
  * Wireless Observational Modular Aerial Network
+ *
  * Created: 10/25/2012 9:59:40 PM
  *  Author: mkanning
  * Ethan Zonca
  * Matthew Kanning
  * Kyle Ripperger
  * Matthew Kroening
+ *
  */
@@ @@ -12,21 +17,21 @@ @@
  #include <util/delay.h>
  #include "lib/serial.h"
+#include "lib/led.h"
- void micro_Configure() {
+void micro_setup() {
 	 // Generic microcontroller config options
+ }
  int main(void)
+ {
 	 // Initialize
 	 micro_Configure();
 	 led_Configure();
 	 serial_Configure(); // Config serial ports
 	micro_setup();
 	led_setup();
 	serial_setup(); // Config serial ports
 	 while(1)
+	 {
-		 serial_SendCommand('0','A',0,0);
+        //serial_SendCommand('0','A',0,0);
+	 }
+ }
@@ \ No newline at end of file @@

0 comments (0 inline, 0 general)