Changeset - 7021dff6a9f0
Parent rev.
Child rev.
[Not reviewed]
default
0 7 0
kripperger@CL-SEC241-09.cedarville.edu - 12 years ago 2013-04-29 17:17:13
kripperger@CL-SEC241-09.cedarville.edu
Added generic voltage reading function
7 files changed with 36 insertions and 3 deletions:
slave/slave/config.h
1
1
slave/slave/lib/geiger.c
2
slave/slave/lib/inputOutput.c
1
slave/slave/lib/masterComm.c
2
2
slave/slave/lib/sensors.c
27
slave/slave/lib/sensors.h
2
slave/slave/modules.c
1
0 comments (0 inline, 0 general)
slave/slave/config.h
➞
Show inline comments
 
@@ -21,7 +21,7 @@
 
// Maximum payload size of command
 
#define MAX_PAYLOAD_LEN 16
 
 
// Number of datatypes to transmit per module type
 
// Number of datatypes to transmit per module type. This should match what is being sent in masterComm.c
 
#define DATATYPES_GENERIC 3
 
#define DATATYPES_SENSOR 8
 
#define DATATYPES_GEIGER 4
slave/slave/lib/geiger.c
➞
Show inline comments
 
@@ -13,6 +13,8 @@
 
#include <util/delay.h>
 
#include "geiger.h"
 
#include "loopTimer.h"
 
#include "led.h"
 
#include "inputOutput.h"
 
 
volatile uint8_t seconds;		// Counts Seconds from Timer2 interrupt
 
volatile uint16_t counts;		// Counts the pulses
slave/slave/lib/inputOutput.c
➞
Show inline comments
 
@@ -10,6 +10,7 @@
 
#include "inputOutput.h"
 
#include "led.h"
 
#include "sensors.h"
 
#include "i2c.h"
 
 
int8_t	moduleID;	// Slave Module ID from rotary dip switch (or EEPROM)
 
slave/slave/lib/masterComm.c
➞
Show inline comments
 
@@ -67,7 +67,7 @@ void masterComm_types()
 
}
 
 
 
void masterComm_packetSend_unsigned(uint8_t id, uint32_t data)
 
void masterComm_packetSend_unsigned(uint8_t id, uint32_t data)	//Sends the data type and data to master for unsigned data
 
{
 
	serial0_sendChar('[');
 
	snprintf(buff2,64,"%u%lu",id,data);
 
@@ -76,7 +76,7 @@ void masterComm_packetSend_unsigned(uint
 
	serial0_sendChar(masterComm_checksum(buff2));
 
}
 
 
void masterComm_packetSend_signed(uint8_t id, int32_t data)
 
void masterComm_packetSend_signed(uint8_t id, int32_t data)	//Sends the data type and data to master for signed data
 
{
 
	serial0_sendChar('[');
 
	snprintf(buff2,64,"%u%ld",id,data);
slave/slave/lib/sensors.c
➞
Show inline comments
 
@@ -30,6 +30,9 @@ uint8_t battL;		// Low byte of ADC
 
uint16_t batt;		// Read battery voltage from ADC
 
uint16_t vBatt;		// battery voltage
 
 
int8_t analogL;		// Low byte of ADC
 
int16_t analog;		// Read analog voltage from ADC
 
 
int16_t ac1;		// The following 11 variables are the calibration values for the BMP085
 
int16_t ac2;
 
int16_t ac3;
 
@@ -220,6 +223,7 @@ void sensors_readLux()
 
 
void sensors_readBatt()
 
{
 
	ADMUX |= (1 << MUX2) | (1 << MUX1) | (1 << MUX0);		// Select ADC7 as the conversion channel
 
	battL = ADCL;					// Read low battery byte from ADC (all 8 bits)
 
	batt = ADCH;					// Read high battery byte from ADC (only two LSBs)
 
	batt = batt << 8;
 
@@ -228,7 +232,25 @@ void sensors_readBatt()
 
}
 
 
 
void sensors_readAnalog(uint8_t pin)
 
{
 
	// Reads analog input on PORTA on the pin (0-7) specified.
 
 
	DDRA &= ~(1 << pin);		// Set pin to input
 
 
	ADMUX &= 0xF8;
 
	ADMUX |= pin;
 
 
	analogL = ADCL;				// Read low battery byte from ADC (all 8 bits)
 
	analog = ADCH;				// Read high battery byte from ADC (only two LSBs)
 
 
	analogL = ADCL;				// Second Read low battery byte from ADC (all 8 bits)
 
	analog = ADCH;				// Second Read high battery byte from ADC (only two LSBs)
 
 
	analog = analog << 8;
 
	analog |= analogL;
 
	analog = (analog * 10.0) / 67.4;
 
}
 
 
 
 
@@ -264,6 +286,11 @@ uint16_t sensors_getBatt(void)		// Gets
 
	return vBatt;
 
}
 
 
int16_t sensors_getAnalog(void)		// Gets battery voltage from variable
 
{
 
	return analog;
 
}
 
 
uint32_t sensors_getAltitude(void)
 
{
 
	return altitude;
slave/slave/lib/sensors.h
➞
Show inline comments
 
@@ -17,6 +17,7 @@ void sensors_readPressure(void);	// Read
 
void sensors_readHumid(void);		// Reads humidity
 
void sensors_readLux(void);			// Reads lux
 
void sensors_readBatt(void);		// Reads battery voltage from ADC
 
void sensors_readAnalog(uint8_t pin);	// Reads generic analog voltage from ADC
 
 
int16_t sensors_getSpiTemp(void);	// Gets spi temperature from variable
 
int8_t sensors_getBoardTemp(void);	// Gets board temperature from variable
 
@@ -24,6 +25,7 @@ int32_t sensors_getPressure(void);	// Ge
 
uint16_t sensors_getHumid(void);	// Gets humidity from variable
 
uint32_t sensors_getLux(void);		// Gets lux from variable
 
uint16_t sensors_getBatt(void);		// Gets battery voltage from variable
 
int16_t sensors_getAnalog(void);		// Gets battery voltage from variable
 
uint32_t sensors_getAltitude(void);	// Gets altitude from variable
 
 
#endif /* SENSORS_H_ */
 
\ No newline at end of file
slave/slave/modules.c
➞
Show inline comments
 
@@ -146,6 +146,7 @@
 
	// No data gatering function needed for geiger daughter board
 
		// This is taken care of in interrupt (See geiger.c)
 
 
 
	//lastRefresh = time_millis();
 
	//if ((time_millis() - lastRefresh) > 1000000)
 
	//{
0 comments (0 inline, 0 general)
Server instance: zserverv-26437 This site is powered by Kallithea, which is © 2010–2021 by various authors & licensed under GPLv3. – Support