//I2C Addresses

 #define BOARDTEMP_ADDR 0xA5	//THIS VALUE IS WRONG

 #define PRESSURE_ADDR 0xA1		//THIS VALUE IS WRONG

 #define HUMID_ADDR 0xA4		//THIS VALUE IS WRONG

 #define RTC_ADDR 0xA2			//DEBUG       //read A3 - write A2

#include "config.h"

#include <inttypes.h>

#include <avr/io.h>

#include <util/delay.h>

#include <compat/twi.h>

#include "lib/led.h"

#include "lib/inputOutput.h"

#include "lib/i2c.h"

void micro_setup()

{

	// Generic microcontroller config options

	DDRA=0xFF; //PORTA is output //DEBUG

}

	led_configure();		//

	i2c_init();				// Setup I2C

	//serial_setup();		// Config serial ports

	uint8_t moduleID = io_getModuleId(); // Slave Module ID from rotary dip switch

        //serial_SendCommand('0','A',0,0);	//DEBUG: EXAMPLE

		//i2c_write(RTC_ADDR, 0x05, 0x3A);	//DEBUG: EXAMPLE

		_delay_ms(10);

		temp = i2c_read(RTC_ADDR, 0x02);		//DEBUG: EXAMPLE: seconds

    }

	return 0;

    <Compile Include="lib\led.h">

      <SubType>compile</SubType>

    </Compile>

    <Compile Include="slave.c">

      <SubType>compile</SubType>

    </Compile>