/*

 * sensors.c

 *

 * Created: 11/19/2012 9:25:01 PM

 *  Author: kripperger

 */ 

#include <inttypes.h>

#include <avr/io.h>

#include <avr/interrupt.h>

#include "../config.h"

#include <util/delay.h>

#include "sensors.h"

#include "spi.h"

#include "i2c.h"

int16_t	spiTemp;	// Thermocouple Temperature (from spi)

int8_t	boardTemp;	// Board Temperature (from i2c)

//Should these two be int16_t?  CHANGED TO INT32 BASED ON DATASHEET

int32_t ut;			// Temperature from BMP085 (from i2c)

int32_t up;			// Pressure from BMP085 (from i2c)

uint16_t humid;		// Humidity (from i2c)

uint8_t light;		// Lux reading (from i2c)

int8_t batt;		// Read battery voltage from ADC

int16_t ac1;		// The following 11 variables are the calibration values for the BMP085

int16_t ac2;

int16_t ac3;

uint16_t ac4;

uint16_t ac5;

uint16_t ac6;

int16_t b1;

int16_t b2;

int16_t mb;

int16_t mc;

int16_t md;

int32_t x1;			// The following variables are needed to calculate the true pressure

int32_t x2;

int32_t x3;

int32_t b3;

uint32_t b4;

int32_t b5;

int32_t b6;

uint32_t b7;

int32_t trueTemp;

int32_t pressure;

void sensors_setupPressure()

{

	//This function reads in the calibration values from the BMP085.  This is done only once.

	ac1 = i2c_read(PRESSURE_ADDR, 0xAA);

	ac1 = ac1 << 8;

	ac1 = ac1 | i2c_read(PRESSURE_ADDR, 0xAB);

	ac2 = i2c_read(PRESSURE_ADDR, 0xAC);

	ac2 = ac2 << 8;

	ac2 = ac2 | i2c_read(PRESSURE_ADDR, 0xAD);

	ac3 = i2c_read(PRESSURE_ADDR, 0xAE);

	ac3 = ac3 << 8;

	ac3 = ac3 | i2c_read(PRESSURE_ADDR, 0xAF);

	ac4 = i2c_read(PRESSURE_ADDR, 0xB0);

	ac4 = ac4 << 8;

	ac4 = ac4 | i2c_read(PRESSURE_ADDR, 0xB1);

	ac5 = i2c_read(PRESSURE_ADDR, 0xB2);

	ac5 = ac5 << 8;

	b3 = ((ac1 * 4 + x3) + 2) / 4;

	//calculate b4

	x1 = (ac3 * b6) >> 16;

	x2 = (b1 * ((b6 * b6) >> 12)) >> 16;

	x3 = ((x1 + x2) + 2) >> 2;

	b4 = (ac4 * (x3 + 32768)) >> 15;

	b7 = (up - b3) * 50000;

	if (b7 < 0x80000000)

	{

		pressure = (b7 << 1) / b4;

	}

	else

	{

		pressure = (b7 / b4) << 1;

	}

	x1 = (pressure >> 8) * (pressure >> 8);

	x1 = (x1 * 3038) >> 16;

	x2 = (-7357 * pressure) >> 16;

	pressure += (x1 + x2 + 3791) >> 4;				//This is the final value for our pressure

}

void sensors_readHumid()

{

	humid = i2c_read16(HUMID_ADDR);

	//calculations to relative humidity: humid = (humid/((2^14) - 1))*100%       >> is divide by power, << is multiply by power, 2^14-1 = 16383

	humid = (humid / 16383) * 100;

}

void sensors_readLight()

{

	// FOR FIRST BYTE:

	light = i2c_read(LIGHT_ADDR, 0x03);

	// exponent = 8xE3 + 4xE2 + 2xE1 + E0

	// mantissa = 8xM7 + 4xM6 + 2xM5 + M4

	// light = 2^(exponent)*mantissa*0.72

	// FOR BOTH BYTES:

	// light = light << 4;

	// light = light | (0x0F & i2c_read(LIGHT_ADDR, 0x04));  //  This can be used to read in the 4 LSBs from the second register

	// exponent = 8xE3 + 4xE2 + 2xE1 + E0

	// mantissa = 128xM7 + 64xM6 + 32xM5 + 16xM4 + 8xM3 + 4xM2 + 2xM1 + M0

	// light = 2^(exponent)*mantissa*0.045

int8_t sensors_getBoardTemp(void)	// Gets board temperature from variable

{

	return boardTemp;

}

int32_t sensors_getPressure(void)	// Gets pressure from variable

{

	return pressure;

}

uint16_t sensors_getHumid(void)			// Gets relative humidity from variable

{

	return humid;

}

uint8_t sensors_getLight(void)		// Gets light from variable

{

	return light;

}

//possibly uint8_t

int8_t sensors_getBatt(void)		// Gets battery voltage from variable

{

	return batt;

}

 *

 * Created: 11/19/2012 9:24:50 PM

 *  Author: kripperger

 */ 

#ifndef SENSORS_H_

#define SENSORS_H_

void sensors_setupPressure(void);	// Reads pressure calibration values

void sensors_readSpiTemp(void);		// Reads spi temperature

void sensors_readBoardTemp(void);	// Reads board temperature

void sensors_readPressure(void);	// Reads pressure

void sensors_readHumid(void);		// Reads humidity

void sensors_readLight(void);		// Reads lux

void sensors_readBatt(void);

int16_t sensors_getSpiTemp(void);	// Gets spi temperature from variable

int8_t sensors_getBoardTemp(void);	// Gets board temperature from variable

int32_t sensors_getPressure(void);	// Gets pressure from variable

uint16_t sensors_getHumid(void);	// Gets humidity from variable

uint8_t sensors_getLight(void);		// Gets lux from variable

int8_t sensors_getBatt(void);		// Gets battery voltage from variable

#endif /* SENSORS_H_ */