seniordesign-firmware Changeset - 82d01332900d

Changeset - 82d01332900d

Parent rev.

Child rev.

[Not reviewed]

default

0 5 0

mkroening@CL-ENS241-07.cedarville.edu - 12 years ago 2013-04-03 21:31:54
mkroening@CL-ENS241-07.cedarville.edu

Sensor fixes

5 files changed with 68 insertions and 93 deletions:

slave/slave/config.h

slave/slave/lib/i2c.c

slave/slave/lib/sensors.c

slave/slave/modules.c

slave/slave/slave.c

0 comments (0 inline, 0 general)

slave/slave/config.h

➞

Show inline comments

@@ @@ -30,8 +30,8 @@ @@
 //Sensors and IO
 #define SENSOR_LOOP 200				// Frequency of sensor reads (in ms) (should be 200)
 #define HEATER_THRESHOLD 0			// Temperature threshold in Fahrenheit where heater is activated
 #define CAMERA_FREQ 5000		// Camera pulse frequency (Should be 30000 for 30 Secs)
 #define CAMERA_PULSE 2500			// Camera pulse duration
 #define CAMERA_FREQ 30000		// Camera pulse frequency (Should be 30000 for 30 Secs)
 #define CAMERA_PULSE 500 			// Camera pulse duration
  //I2C Addresses
  #define EEPROM_ADDR 0xA0		// Read 0xA1 - Write 0xA0

slave/slave/lib/i2c.c

➞

Show inline comments

@@ @@ -46,7 +46,7 @@ unsigned char i2c_start(unsigned char ad @@
 	// wait until transmission completed
 //	startTime = time_millis();
 	while(!(TWCR & (1<<TWINT)))
+	while(!(TWCR & (1<<TWINT)));
 //	{
 //		if ((time_millis() - startTime) > 10)
 //		{
@@ @@ -64,7 +64,7 @@ unsigned char i2c_start(unsigned char ad @@
 	// wail until transmission completed and ACK/NACK has been received
 //	startTime = time_millis();
 	while(!(TWCR & (1<<TWINT)))
+	while(!(TWCR & (1<<TWINT)));
 //	{
 //		if ((time_millis() - startTime) > 10)
 //		{
@@ @@ -99,14 +99,14 @@ void i2c_start_wait(unsigned char addres @@
 	    TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
     	// wait until transmission completed
 		startTime = time_millis();
     	while(!(TWCR & (1<<TWINT)))
+		{
 			if ((time_millis() - startTime) > 10)
+			{
 				break;	// Timeout Reached!
+			}
+		}
 		//startTime = time_millis();
     	while(!(TWCR & (1<<TWINT)));
 		//{
 			//if ((time_millis() - startTime) > 10)
 			//{
 				//break;	// Timeout Reached!
 			//}
 		//}
     	// check value of TWI Status Register. Mask prescaler bits.
     	twst = TW_STATUS & 0xF8;
@@ @@ -117,14 +117,14 @@ void i2c_start_wait(unsigned char addres @@
     	TWCR = (1<<TWINT) | (1<<TWEN);
     	// wail until transmission completed
 		startTime = time_millis();
     	while(!(TWCR & (1<<TWINT)))
+		{
 			if ((time_millis() - startTime) > 10)
+			{
 				break;	// Timeout Reached!
+			}
+		}
 		//startTime = time_millis();
     	while(!(TWCR & (1<<TWINT)));
 		//{
 			//if ((time_millis() - startTime) > 10)
 			//{
 				//break;	// Timeout Reached!
 			//}
 		//}
     	// check value of TWI Status Register. Mask prescaler bits.
     	twst = TW_STATUS & 0xF8;
@@ @@ -134,14 +134,14 @@ void i2c_start_wait(unsigned char addres @@
 	        TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
 	        // wait until stop condition is executed and bus released
 			startTime = time_millis();
 	        while(TWCR & (1<<TWSTO))
+			{
 				if ((time_millis() - startTime) > 10)
+				{
 					break;	// Timeout Reached!
+				}
+			}
 			//startTime = time_millis();
 	        while(TWCR & (1<<TWSTO));
 			//{
 				//if ((time_millis() - startTime) > 10)
 				//{
 					//break;	// Timeout Reached!
 				//}
 			//}
     	    continue;
+    	}
@@ @@ -179,7 +179,7 @@ void i2c_stop(void) @@
 	// wait until stop condition is executed and bus released
 //	startTime = time_millis();
 	while(TWCR & (1<<TWSTO))
+	while(TWCR & (1<<TWSTO));
+	{
 //		if ((time_millis() - startTime) > 10)
 //		{
@@ @@ -207,14 +207,14 @@ unsigned char i2c_writeX( unsigned char @@
 	TWCR = (1<<TWINT) | (1<<TWEN);
 	// wait until transmission completed
 	startTime = time_millis();
 	while(!(TWCR & (1<<TWINT)))
+	{
 		if ((time_millis() - startTime) > 10)
+		{
 			break;	// Timeout Reached!
+		}
+	}
 	//startTime = time_millis();
 	while(!(TWCR & (1<<TWINT)));
 	//{
 		//if ((time_millis() - startTime) > 10)
 		//{
 			//break;	// Timeout Reached!
 		//}
 	//}
 	// check value of TWI Status Register. Mask prescaler bits
@@ @@ -235,14 +235,14 @@ unsigned char i2c_readAck(void) @@
+{
 	TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWEA);
 	startTime = time_millis();
 	while(!(TWCR & (1<<TWINT)))
+	{
 		if ((time_millis() - startTime) > 10)
+		{
 			break;	// Timeout Reached!
+		}
+	}
 	//startTime = time_millis();
 	while(!(TWCR & (1<<TWINT)));
 	//{
 		//if ((time_millis() - startTime) > 10)
 		//{
 			//break;	// Timeout Reached!
 		//}
 	//}
     return TWDR;
@@ @@ -259,14 +259,14 @@ unsigned char i2c_readNak(void) @@
+{
 	TWCR = (1<<TWINT) | (1<<TWEN);
 	startTime = time_millis();
 	while(!(TWCR & (1<<TWINT)))
+	{
 		if ((time_millis() - startTime) > 10)
+		{
 			break;	// Timeout Reached!
+		}
+	}
 	//startTime = time_millis();
 	while(!(TWCR & (1<<TWINT)));
 	//{
 		//if ((time_millis() - startTime) > 10)
 		//{
 			//break;	// Timeout Reached!
 		//}
 	//}
     return TWDR;

slave/slave/lib/sensors.c

➞

Show inline comments

@@ @@ -186,8 +186,9 @@ void sensors_readPressure() @@
 	x1 = (x1 * 3038) >> 16;
 	x2 = (-7357 * pressure) >> 16;
 	pressure += (x1 + x2 + 3791) >> 4;				//This is the final value for our pressure
 	pressure = pressure - 21000;	// Linear Offset (Debug?)
 	altitude = (float)44330 * (1 - pow(((float) pressure/101325), 0.190295));
+	altitude = (float)44330 * (1 - pow(((float) pressure/101325), 0.190295));	// 101325
+}
 void sensors_readHumid()

slave/slave/modules.c

➞

Show inline comments

@@ @@ -18,7 +18,6 @@ @@
  #include "lib/led.h"
  uint32_t lastPicture;
  uint8_t pulseOn;
  uint32_t lastRefresh;	// Time in ms when last geiger refresh occurred
  void modules_setup(uint8_t id)
@@ @@ -114,7 +113,6 @@ @@
  void modules_cameras_setup()
+ {
 	 lastPicture = time_millis();
 	 pulseOn = time_millis();
 	 DDRA |= (1 << DDA0);	// Set PA0 to Output for Camera
 	 DDRA |= (1 << DDA1);	// Set PA1 to Output for Camera
@@ @@ -156,25 +154,22 @@ @@
  void modules_cameras()
+ {
 	// Gathers data and performs functions for cameras daughter board
 		//cameras_readAccelXYZ();
 		//if ((time_millis() - pulseOn) > CAMERA_PULSE)
 		//{
 		//	PORTA &= ~(1 << PA0);	// Pull pin on usb low
 		//	PORTA &= ~(1 << PA1);	// Pull pin on usb low
 		//	PORTA &= ~(1 << PA2);	// Pull pin on usb low
 		//	PORTA &= ~(1 << PA3);	// Pull pin on usb low
 		//	if ((time_millis() - lastPicture) > CAMERA_FREQ)	// Frequency of photos
 		//	{
 		//		cameras_sendPulse();
 		//		lastPicture = time_millis();
 		//	}
 		//	pulseOn = time_millis();
 		//}
 		if ((time_millis() - lastPicture) > CAMERA_FREQ)
+		{
 			cameras_sendPulse();
 			lastPicture = time_millis();
+ }
 		else if ((time_millis() - lastPicture) > CAMERA_PULSE)
+		{
 			PORTA &= ~(1 << PA0);	// Pull pin on usb low
 			PORTA &= ~(1 << PA1);	// Pull pin on usb low
 			PORTA &= ~(1 << PA2);	// Pull pin on usb low
 			PORTA &= ~(1 << PA3);	// Pull pin on usb low
+		}
+ }
@@ \ No newline at end of file @@

slave/slave/slave.c

➞

Show inline comments

@@ @@ -37,8 +37,6 @@ @@
 #include "lib/watchdog.h"
 bool WDTreset = false;
  uint32_t lastPicture;
  uint8_t pulseOn;
 void micro_setup()
+{
@@ @@ -108,25 +106,6 @@ int main(void) @@
 		}	// IFloop
 		//if (io_getModuleId() == 3)
 		//{
 		//	if ((time_millis() - pulseOn) > CAMERA_PULSE)
 		//	{
 		//		PORTA &= ~(1 << PA0);	// Pull pin on usb low
 		//		PORTA &= ~(1 << PA1);	// Pull pin on usb low
 		//		PORTA &= ~(1 << PA2);	// Pull pin on usb low
 		//		PORTA &= ~(1 << PA3);	// Pull pin on usb low
 		//		if ((time_millis() - lastPicture) > CAMERA_FREQ)	// Frequency of photos
 		//		{
 		//			cameras_sendPulse();
 		//			lastPicture = time_millis();
 		//		}
 		//		pulseOn = time_millis();
 		//	}
 		//}
     }	// While(1)
 	return 0;

0 comments (0 inline, 0 general)