diff --git a/dru/LaenPCBOrder.dru b/dru/LaenPCBOrder.dru --- a/dru/LaenPCBOrder.dru +++ b/dru/LaenPCBOrder.dru @@ -1,73 +1,69 @@ -description[de] = EAGLE Design Rules\n

\nDie Standard-Design-Rules sind so gewählt, dass sie für \ndie meisten Anwendungen passen. Sollte ihre Platine \nbesondere Anforderungen haben, treffen Sie die erforderlichen\nEinstellungen hier und speichern die Design Rules unter \neinem neuen Namen ab. -description[en] = Laen's PCB Order Design Rules\n

\nPlease make sure your boards conform to these design rules. -layerSetup = (1*16) -mtCopper = 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm -mtIsolate = 1.5011mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm -mdWireWire = 6mil -mdWirePad = 6mil -mdWireVia = 6mil -mdPadPad = 6mil -mdPadVia = 6mil -mdViaVia = 6mil -mdSmdPad = 6mil -mdSmdVia = 6mil -mdSmdSmd = 6mil -mdViaViaSameLayer = 8mil -mnLayersViaInSmd = 2 -mdCopperDimension = 15mil -mdDrill = 6mil -mdSmdStop = 0mil -msWidth = 6mil -msDrill = 13mil -msMicroVia = 13mil -msBlindViaRatio = 0.500000 -rvPadTop = 0.250000 -rvPadInner = 0.250000 -rvPadBottom = 0.250000 -rvViaOuter = 0.250000 -rvViaInner = 0.250000 -rvMicroViaOuter = 0.250000 -rvMicroViaInner = 0.250000 -rlMinPadTop = 7mil -rlMaxPadTop = 20mil -rlMinPadInner = 7mil -rlMaxPadInner = 20mil -rlMinPadBottom = 7mil -rlMaxPadBottom = 20mil -rlMinViaOuter = 7mil -rlMaxViaOuter = 20mil -rlMinViaInner = 7mil -rlMaxViaInner = 20mil -rlMinMicroViaOuter = 4mil -rlMaxMicroViaOuter = 20mil -rlMinMicroViaInner = 4mil -rlMaxMicroViaInner = 20mil -psTop = -1 -psBottom = -1 -psFirst = -1 -psElongationLong = 100 -psElongationOffset = 100 -mvStopFrame = 1.000000 -mvCreamFrame = 0.000000 -mlMinStopFrame = 4mil -mlMaxStopFrame = 4mil -mlMinCreamFrame = 0mil -mlMaxCreamFrame = 0mil -mlViaStopLimit = 0mil -srRoundness = 0.000000 -srMinRoundness = 0mil -srMaxRoundness = 0mil -slThermalGap = 0.500000 -slMinThermalGap = 20mil -slMaxThermalGap = 100mil -slAnnulusIsolate = 20mil -slThermalIsolate = 10mil -slAnnulusRestring = 0 -slThermalRestring = 1 -slThermalsForVias = 0 -checkGrid = 0 -checkAngle = 0 -checkFont = 1 -checkRestrict = 1 -useDiameter = 13 -maxErrors = 50 +description[de] = EAGLE Design Rules\n

\nDie Standard-Design-Rules sind so gewählt, dass sie für \ndie meisten Anwendungen passen. Sollte ihre Platine \nbesondere Anforderungen haben, treffen Sie die erforderlichen\nEinstellungen hier und speichern die Design Rules unter \neinem neuen Namen ab. +description[en] = Laen's PCB Order Design Rules\n

\nPlease make sure your boards conform to these design rules. +layerSetup = (1*16) +mtCopper = 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm +mtIsolate = 1.5011mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm +mdWireWire = 6mil +mdWirePad = 6mil +mdWireVia = 6mil +mdPadPad = 6mil +mdPadVia = 6mil +mdViaVia = 6mil +mdSmdPad = 6mil +mdSmdVia = 6mil +mdSmdSmd = 6mil +mdViaViaSameLayer = 8mil +mnLayersViaInSmd = 2 +mdCopperDimension = 15mil +mdDrill = 6mil +mdSmdStop = 0mil +msWidth = 6mil +msDrill = 6mil +msMicroVia = 6mil +msBlindViaRatio = 0.500000 +rvPadTop = 0.250000 +rvPadInner = 0.250000 +rvPadBottom = 0.250000 +rvViaOuter = 0.250000 +rvViaInner = 0.250000 +rvMicroViaOuter = 0.250000 +rvMicroViaInner = 0.250000 +rlMinPadTop = 7mil +rlMaxPadTop = 20mil +rlMinPadInner = 7mil +rlMaxPadInner = 20mil +rlMinPadBottom = 7mil +rlMaxPadBottom = 20mil +rlMinViaOuter = 7mil +rlMaxViaOuter = 20mil +rlMinViaInner = 7mil +rlMaxViaInner = 20mil +rlMinMicroViaOuter = 4mil +rlMaxMicroViaOuter = 20mil +rlMinMicroViaInner = 4mil +rlMaxMicroViaInner = 20mil +psTop = -1 +psBottom = -1 +psFirst = -1 +psElongationLong = 100 +psElongationOffset = 100 +mvStopFrame = 1.000000 +mvCreamFrame = 0.000000 +mlMinStopFrame = 4mil +mlMaxStopFrame = 4mil +mlMinCreamFrame = 0mil +mlMaxCreamFrame = 0mil +mlViaStopLimit = 0mil +srRoundness = 0.000000 +srMinRoundness = 0mil +srMaxRoundness = 0mil +slThermalIsolate = 10mil +slThermalsForVias = 0 +dpMaxLengthDifference = 10mm +dpGapFactor = 2.500000 +checkGrid = 0 +checkAngle = 0 +checkFont = 1 +checkRestrict = 1 +useDiameter = 13 +maxErrors = 50 diff --git a/master/master.brd b/master/master.brd --- a/master/master.brd +++ b/master/master.brd @@ -9,7 +9,7 @@ - + @@ -134,7 +134,7 @@ - + TODO: USE NICK"S THING @@ -553,43 +553,41 @@ Based on the following sources:<p> - -FEMALE <b>SMA CONNECTOR</b><p> -Radiall<p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME ->VALUE + +<b>SMA 50 Ohm</b> Board Thickness <b>0.062</b> Inch, End Launch Jack Receptacle<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + @@ -926,12 +924,12 @@ www.irf.com<p> - + - + @@ -1159,24 +1157,12 @@ Please make sure your boards conform to - - + + - - - - - - - - - - - - @@ -1202,6 +1188,18 @@ Please make sure your boards conform to + + + + + + + + + + + + @@ -1257,16 +1255,6 @@ Please make sure your boards conform to - - - - - - - - - - @@ -1276,20 +1264,17 @@ Please make sure your boards conform to - - + - - - + @@ -1297,7 +1282,7 @@ Please make sure your boards conform to - + @@ -1321,7 +1306,6 @@ Please make sure your boards conform to - @@ -1393,8 +1377,8 @@ Please make sure your boards conform to - - + + @@ -1440,17 +1424,10 @@ Please make sure your boards conform to - - - - - - - - + + - - + @@ -1482,6 +1459,25 @@ Please make sure your boards conform to + + + + + + + + + + + + + + + + + + + @@ -1704,24 +1700,17 @@ Please make sure your boards conform to - - - - + + + + - - + - - - - - - @@ -1731,6 +1720,13 @@ Please make sure your boards conform to + + + + + + + @@ -1782,8 +1778,6 @@ Please make sure your boards conform to - - @@ -1887,6 +1881,9 @@ Please make sure your boards conform to + + + @@ -1939,11 +1936,13 @@ Please make sure your boards conform to - - + + + + @@ -1957,8 +1956,7 @@ Please make sure your boards conform to - - + @@ -2006,10 +2004,10 @@ Please make sure your boards conform to - + - - + + @@ -2087,12 +2085,6 @@ Please make sure your boards conform to - - - - - - @@ -2111,6 +2103,14 @@ Please make sure your boards conform to + + + + + + + + @@ -2149,23 +2149,27 @@ Please make sure your boards conform to - + - - + + - - - - + + + + + + + + @@ -2185,10 +2189,6 @@ Please make sure your boards conform to - - - - @@ -2198,14 +2198,16 @@ Please make sure your boards conform to + + - - - + + + @@ -2272,11 +2274,11 @@ Please make sure your boards conform to - - - - - + + + + + @@ -2293,10 +2295,12 @@ Please make sure your boards conform to - - - - + + + + + + @@ -2319,9 +2323,9 @@ Please make sure your boards conform to - - - + + + diff --git a/master/master.sch b/master/master.sch --- a/master/master.sch +++ b/master/master.sch @@ -3186,44 +3186,311 @@ Source: http://www.atmel.com/dyn/resourc - -FEMALE <b>SMA CONNECTOR</b><p> -Radiall<p> - - - - - - - - - - - - - - - - - - - - - - - - - + +<b>SMA 50 Ohm</b> End Launch Jack Receptacle - Round Contact<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + - - - - - + + + + + >NAME >VALUE + +<b>SMA 50 Ohm</b> Board Thickness <b>0.062</b> Inch, End Launch Jack Receptacle<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>SMA 50 Ohm</b> Board Thickness <b>0.062</b> Inch, End Launch Jack Receptacle<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>SMA 50 Ohm</b> Board Thickness <b>0.062</b> Inch, End Launch Jack Receptacle<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>SMA 50 Ohm</b> Board Thickness <b>0.031</b> Inch, End Launch Jack Receptacle<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>SMA 50 Ohm</b> Board Thickness <b>0.062</b> Inch, End Launch Jack Receptacle<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>SMA 50 Ohm</b> Board Thickness <b>0.047</b> Inch, End Launch Jack Receptacle<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>SMA 50 Ohm</b> Board Thickness <b>0.047</b> Inch, End Launch Jack Receptacle<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<b>SMA Connector</b> HF-Steckverbinder PC END BLKHD JCK GLD .062" BOARDS<p> +Hersteller: Emerson / Johnson<br> +Source: <a href="http://emersonconnectivity.com/OA_MEDIA/drawings/dr-1420701871.pdf"> Data sheet<a> + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + @@ -3240,29 +3507,31 @@ Radiall<p> - ->NAME - + + +>NAME + + + - -FEMALE <b>SMA CONNECTOR</b><p> -Radiall<p> + +<b>SMA 50 Ohm</b> End Launch Jack Receptacle - Round Contact<p> +Johnson Components<br> +Source: www.johnsoncomponents.com .. J502-ND.pdf - - - - + + - + - - - - - + + + + + @@ -3273,6 +3542,142 @@ Radiall<p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -5397,12 +5802,12 @@ There are 2 variants that must be carefu - + - + @@ -5501,13 +5906,6 @@ There are 2 variants that must be carefu - - - - - - - @@ -5548,6 +5946,8 @@ There are 2 variants that must be carefu + + @@ -5769,8 +6169,6 @@ Maybe use bigger R's - - @@ -5839,6 +6237,8 @@ Maybe use bigger R's + + @@ -5882,7 +6282,7 @@ Maybe use bigger R's - + @@ -6054,7 +6454,7 @@ Maybe use bigger R's - + @@ -6416,7 +6816,7 @@ Maybe use bigger R's - + @@ -6865,7 +7265,7 @@ Maybe use bigger R's - + diff --git a/slave-daughter/slave-daughter-camera.brd b/slave-daughter/slave-daughter-camera.brd --- a/slave-daughter/slave-daughter-camera.brd +++ b/slave-daughter/slave-daughter-camera.brd @@ -20,8 +20,8 @@ - - + + @@ -222,6 +222,22 @@ We've spent an enormous amount of time c + + + + + + + + + +>NAME +>VALUE + + + + + @@ -247,6 +263,34 @@ We've spent an enormous amount of time c + + + +<b>CHIPLED</b><p> +Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + @@ -438,6 +482,12 @@ design rules under a new name. + + + + + + @@ -445,26 +495,21 @@ design rules under a new name. - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + @@ -502,29 +547,44 @@ design rules under a new name. - - - - - - + + + + + + + + + - - - - + + + + + + + + + + - - - + + + + + + + + + @@ -541,6 +601,32 @@ design rules under a new name. + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/slave-daughter/slave-daughter-camera.sch b/slave-daughter/slave-daughter-camera.sch --- a/slave-daughter/slave-daughter-camera.sch +++ b/slave-daughter/slave-daughter-camera.sch @@ -391,6 +391,212 @@ We've spent an enormous amount of time c + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + +>Name +>Value + + +<b>RESISTOR</b><p> +chip + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + + +1/6W Thru-hole Resistor - *UNPROVEN* + + + + + + +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + +1/4W Resistor, 0.4" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +1/2W Resistor, 0.5" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +1W Resistor, 0.6" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +2W Resistor, 0.8" wide<p> + +Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> + + + + + + +>Name +>Value + + +<h3>AXIAL-0.3-KIT</h3> + +Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.<br> +<br> + +<b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. + + + + + + + + + + +>Name +>Value + + + + + + + + + + + + + + + + + + + + + + + + + @@ -467,6 +673,21 @@ We've spent an enormous amount of time c >VALUE + + + + + + + + + + +>NAME +>VALUE + + + @@ -604,6 +825,132 @@ Standard 10-pin 0.1" header. Use with st + +<b>Resistor</b> +Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -661,6 +1008,1230 @@ Standard 10-pin 0.1" header. Use with st + + + +<b>CHICAGO MINIATURE LAMP, INC.</b><p> +7022X Series SMT LEDs 1206 Package Size + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +<B>LED</B><p> +5 mm, square, Siemens + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<B>LED</B><p> +2 x 5 mm, rectangle + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + +<B>LED</B><p> +3 mm, round + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<B>LED</B><p> +5 mm, round + + + + + + + + + + + +>NAME +>VALUE + + +<B>LED</B><p> +1 mm, round, Siemens + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<B>LED BLOCK</B><p> +1 LED, Siemens + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>LED HOLDER</b><p> +Siemens + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>LED HOLDER</b><p> +Siemens + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>LED HOLDER</b><p> +Siemens + + + + + + + + + + + + + + + + + +A+ +K- +>NAME +>VALUE + + + + + +<b>LED HOLDER</b><p> +Siemens + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE ++ +- + + +<B>IR LED</B><p> +infrared emitting diode, Infineon +TO-18, lead spacing 2.54 mm, cathode marking<p> +Inifineon + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<B>IR LED</B><p> +infrared emitting diode, Infineon +TO-18, lead spacing 2.54 mm, cathode marking<p> +Inifineon + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<B>LED</B><p> +rectangle, 5.7 x 3.2 mm + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<B>IR LED</B><p> +IR transmitter Siemens + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>TOPLED® High-optical Power LED (HOP)</b><p> +Source: http://www.osram.convergy.de/ ... ls_t675.pdf + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +A +C + + + + + + + +<b>BLUE LINETM Hyper Mini TOPLED® Hyper-Bright LED</b><p> +Source: http://www.osram.convergy.de/ ... LB M676.pdf + + + + + + + + + + + + + + +A +C +>NAME +>VALUE + + + + + + + +<b>Super SIDELED® High-Current LED</b><p> +LG A672, LP A672 <br> +Source: http://www.osram.convergy.de/ ... LG_LP_A672.pdf (2004.05.13) + + + + + + + + + + + + + + + + + + + +C +A +>NAME +>VALUE + + + + + + + +<b>SmartLEDTM Hyper-Bright LED</b><p> +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY L896.pdf + + + + + + + +>NAME +>VALUE + + + + + +<b>Hyper TOPLED® RG Hyper-Bright LED</b><p> +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY T776.pdf + + + + + + + + + + + + + + + + +>NAME +>VALUE +A +C + + + + + + + + + + +<b>Hyper Micro SIDELED®</b><p> +Source: http://www.osram.convergy.de/ ... LA_LO_LS_LY Y876.pdf + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<b>Power TOPLED®</b><p> +Source: http://www.osram.convergy.de/ ... LA_LO_LA_LY E67B.pdf + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +C +A +C +C + + + + + + + + + + + +<b>Hyper CHIPLED Hyper-Bright LED</b><p> +LB Q993<br> +Source: http://www.osram.convergy.de/ ... Lb_q993.pdf + + + + +>NAME +>VALUE + + + + + + + +<b>Hyper CHIPLED Hyper-Bright LED</b><p> +LB R99A<br> +Source: http://www.osram.convergy.de/ ... lb_r99a.pdf + + + + +>NAME +>VALUE ++ + + + + + + + +<b>Mini TOPLED Santana®</b><p> +Source: http://www.osram.convergy.de/ ... LG M470.pdf + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +<b>CHIPLED</b><p> +Source: http://www.osram.convergy.de/ ... LG_R971.pdf + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +<b>CHIPLED</b><p> +Source: http://www.osram.convergy.de/ ... LG_LY N971.pdf + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +<b>CHIPLED</b><p> +Source: http://www.osram.convergy.de/ ... LG_LY Q971.pdf + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +<b>CHIPLED-0603</b><p> +Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br> +Package able to withstand TTW-soldering heat<br> +Package suitable for TTW-soldering<br> +Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +<b>SmartLED TTW</b><p> +Recommended Solder Pad useable for SmartLEDTM and Chipled - Package 0603<br> +Package able to withstand TTW-soldering heat<br> +Package suitable for TTW-soldering<br> +Source: http://www.osram.convergy.de/ ... LO_LS_LY L89K.pdf + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +A +K + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +<b>LED</b><p> +<u>OSRAM</u>:<br> + +- <u>CHIPLED</u><br> +LG R971, LG N971, LY N971, LG Q971, LY Q971, LO R971, LY R971 +LH N974, LH R974<br> +LS Q976, LO Q976, LY Q976<br> +LO Q996<br> + + +- <u>Hyper CHIPLED</u><br> +LW Q18S<br> +LB Q993, LB Q99A, LB R99A<br> + +- <u>SideLED</u><br> +LS A670, LO A670, LY A670, LG A670, LP A670<br> +LB A673, LV A673, LT A673, LW A673<br> +LH A674<br> +LY A675<br> +LS A676, LA A676, LO A676, LY A676, LW A676<br> +LS A679, LY A679, LG A679<br> + +- <u>Hyper Micro SIDELED®</u><br> +LS Y876, LA Y876, LO Y876, LY Y876<br> +LT Y87S<br> + +- <u>SmartLED</u><br> +LW L88C, LW L88S<br> +LB L89C, LB L89S, LG L890<br> +LS L89K, LO L89K, LY L89K<br> +LS L896, LA L896, LO L896, LY L896<br> + +- <u>TOPLED</u><br> +LS T670, LO T670, LY T670, LG T670, LP T670<br> +LSG T670, LSP T670, LSY T670, LOP T670, LYG T670<br> +LG T671, LOG T671, LSG T671<br> +LB T673, LV T673, LT T673, LW T673<br> +LH T674<br> +LS T676, LA T676, LO T676, LY T676, LB T676, LH T676, LSB T676, LW T676<br> +LB T67C, LV T67C, LT T67C, LS T67K, LO T67K, LY T67K, LW E67C<br> +LS E67B, LA E67B, LO E67B, LY E67B, LB E67C, LV E67C, LT E67C<br> +LW T67C<br> +LS T679, LY T679, LG T679<br> +LS T770, LO T770, LY T770, LG T770, LP T770<br> +LB T773, LV T773, LT T773, LW T773<br> +LH T774<br> +LS E675, LA E675, LY E675, LS T675<br> +LS T776, LA T776, LO T776, LY T776, LB T776<br> +LHGB T686<br> +LT T68C, LB T68C<br> + +- <u>Hyper Mini TOPLED®</u><br> +LB M676<br> + +- <u>Mini TOPLED Santana®</u><br> +LG M470<br> +LS M47K, LO M47K, LY M47K<br> + +<p> +Source: http://www.osram.convergy.de/ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -682,6 +2253,15 @@ Standard 10-pin 0.1" header. Use with st + + + + + + + + + @@ -693,6 +2273,9 @@ Standard 10-pin 0.1" header. Use with st Cameras +LEDs + + @@ -707,6 +2290,15 @@ Standard 10-pin 0.1" header. Use with st + + + + + + + + + @@ -737,6 +2329,21 @@ Standard 10-pin 0.1" header. Use with st + + + + + + + + + + + + + + + @@ -828,6 +2435,11 @@ Standard 10-pin 0.1" header. Use with st + + + + @@ -840,6 +2452,11 @@ Standard 10-pin 0.1" header. Use with st + + + + @@ -852,6 +2469,11 @@ Standard 10-pin 0.1" header. Use with st + + + + @@ -888,6 +2510,27 @@ Standard 10-pin 0.1" header. Use with st + + + + + + + + + + + + + + + + + + + + + diff --git a/slave-daughter/slave-daughter-sensors.brd b/slave-daughter/slave-daughter-sensors.brd --- a/slave-daughter/slave-daughter-sensors.brd +++ b/slave-daughter/slave-daughter-sensors.brd @@ -568,32 +568,16 @@ Please make sure your boards conform to - - - - - - - - - - - - - - - - @@ -602,6 +586,19 @@ Please make sure your boards conform to + + + + + + + + + + + + + @@ -730,7 +727,8 @@ Please make sure your boards conform to - + + @@ -741,11 +739,8 @@ Please make sure your boards conform to - - - - + @@ -816,6 +811,30 @@ Please make sure your boards conform to + + + + + + + + + + + + + + + + + + + + + + + +