diff --git a/slave/slave.brd b/slave/slave.brd
--- a/slave/slave.brd
+++ b/slave/slave.brd
@@ -828,7 +828,7 @@ Please make sure your boards conform to 
 <param name="mlMaxStopFrame" value="4mil"/>
 <param name="mlMinCreamFrame" value="0mil"/>
 <param name="mlMaxCreamFrame" value="0mil"/>
-<param name="mlViaStopLimit" value="0mil"/>
+<param name="mlViaStopLimit" value="12mil"/>
 <param name="srRoundness" value="0"/>
 <param name="srMinRoundness" value="0mil"/>
 <param name="srMaxRoundness" value="0mil"/>
@@ -837,7 +837,7 @@ Please make sure your boards conform to 
 <param name="dpMaxLengthDifference" value="10mm"/>
 <param name="dpGapFactor" value="2.5"/>
 <param name="checkGrid" value="0"/>
-<param name="checkAngle" value="0"/>
+<param name="checkAngle" value="1"/>
 <param name="checkFont" value="1"/>
 <param name="checkRestrict" value="1"/>
 <param name="useDiameter" value="13"/>
@@ -1283,14 +1283,12 @@ Please make sure your boards conform to 
 <wire x1="27.2288" y1="9.9568" x2="26.1112" y2="11.0744" width="0.4064" layer="1"/>
 <wire x1="26.1112" y1="11.0744" x2="26.1112" y2="12.0688" width="0.4064" layer="1"/>
 <wire x1="26.1112" y1="12.0688" x2="26.073" y2="12.107" width="0.4064" layer="1"/>
-<wire x1="45.4796" y1="28.2448" x2="45.72" y2="28.282" width="0.4064" layer="1"/>
 <wire x1="14.2548" y1="28.6512" x2="14.204" y2="28.702" width="0.4064" layer="1"/>
 <wire x1="54.356" y1="34.4805" x2="45.085" y2="34.4805" width="0.4064" layer="1"/>
 <wire x1="54.356" y1="34.4805" x2="54.7243" y2="34.4805" width="0.4064" layer="1"/>
 <wire x1="55.626" y1="26.416" x2="55.4736" y2="26.416" width="0.8128" layer="1"/>
 <wire x1="55.4736" y1="26.416" x2="55.4736" y2="27.0256" width="0.8128" layer="1"/>
 <wire x1="55.4736" y1="27.0256" x2="53.026" y2="27.0256" width="0.8128" layer="1"/>
-<wire x1="25.273" y1="23.707" x2="25.26665" y2="22.0472" width="0.4064" layer="1"/>
 <wire x1="25.26665" y1="22.0472" x2="24.7904" y2="22.0472" width="0.4064" layer="1"/>
 <via x="24.7904" y="22.0472" extent="1-16" drill="0.254"/>
 <via x="44.196" y="14.6304" extent="1-16" drill="0.381"/>
@@ -1842,7 +1840,6 @@ Please make sure your boards conform to 
 <wire x1="51.816" y1="31.8008" x2="53.34" y2="30.2768" width="0.4064" layer="1"/>
 <wire x1="53.34" y1="30.2768" x2="55.9816" y2="30.2768" width="0.4064" layer="1"/>
 <wire x1="56.7944" y1="31.0896" x2="56.7944" y2="35.052" width="0.4064" layer="1"/>
-<wire x1="54.9656" y1="36.8808" x2="54.6989" y2="36.6776" width="0.4064" layer="1"/>
 <wire x1="54.6989" y1="36.6776" x2="54.356" y2="37.0205" width="0.4064" layer="1"/>
 <wire x1="55.9816" y1="30.2768" x2="56.7944" y2="31.0896" width="0.4064" layer="1"/>
 <wire x1="56.7944" y1="35.052" x2="54.9656" y2="36.8808" width="0.4064" layer="1"/>
@@ -1851,6 +1848,8 @@ Please make sure your boards conform to 
 <via x="33.8328" y="14.732" extent="1-16" drill="0.254"/>
 <wire x1="33.8328" y1="14.732" x2="31.098" y2="14.732" width="0.4064" layer="1"/>
 <wire x1="31.098" y1="14.732" x2="31.073" y2="14.707" width="0.4064" layer="1"/>
+<wire x1="54.6989" y1="36.6776" x2="54.9656" y2="36.6776" width="0.4064" layer="1"/>
+<wire x1="54.9656" y1="36.6776" x2="54.9656" y2="36.8808" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP2">
 <contactref element="ROTARY_DIP" pad="4"/>