seniordesign-hardware Changeset - 0a8754b7d542

Changeset - 0a8754b7d542

Parent rev.

Child rev.

[Not reviewed]

default

0 4 0

kripperger@CL-SEC241-09.cedarville.edu - 13 years ago 2012-10-26 16:40:21
kripperger@CL-SEC241-09.cedarville.edu

board basics slaves

4 files changed with 95 insertions and 91 deletions:

slave-daughter/slave-daughter-camera.brd

slave-daughter/slave-daughter-gieger.brd

slave-daughter/slave-daughter-sensors.brd

slave/slave.brd

0 comments (0 inline, 0 general)

slave-daughter/slave-daughter-camera.brd

➞

Show inline comments

@@ @@ -74,99 +74,100 @@ @@
 <layer number="121" name="_tsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="122" name="_bsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="123" name="tTestmark" color="7" fill="1" visible="no" active="yes"/>
 <layer number="124" name="bTestmark" color="7" fill="1" visible="no" active="yes"/>
 <layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="126" name="_bNames" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="127" name="_tValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="128" name="_bValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="131" name="tAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="132" name="bAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
 <layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
 <layer number="152" name="_bDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
 <layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
 <layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
 <layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
 <layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
 <layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
 <layer number="206" name="206bmp" color="7" fill="10" visible="no" active="yes"/>
 <layer number="207" name="207bmp" color="8" fill="10" visible="no" active="yes"/>
 <layer number="208" name="208bmp" color="9" fill="10" visible="no" active="yes"/>
 <layer number="209" name="209bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="210" name="210bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="211" name="211bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="212" name="212bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="213" name="213bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="214" name="214bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="215" name="215bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="216" name="216bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
 <layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
 <layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
 <layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
 <layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
 <layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
 <layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
 <layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
 <layer number="248" name="Housing" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="249" name="Edge" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
 <layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
 <layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
 </layers>
 <board>
 <plain>
 <wire x1="0" y1="0" x2="100" y2="0" width="0" layer="20"/>
 <wire x1="100" y1="0" x2="100" y2="80" width="0" layer="20"/>
 <wire x1="100" y1="80" x2="0" y2="80" width="0" layer="20"/>
 <wire x1="0" y1="80" x2="0" y2="0" width="0" layer="20"/>
 <wire x1="100" y1="0" x2="100" y2="39.37" width="0" layer="20"/>
 <wire x1="100" y1="39.37" x2="0" y2="39.37" width="0" layer="20"/>
 <wire x1="0" y1="39.37" x2="0" y2="0" width="0" layer="20"/>
 <text x="-1.27" y="57.15" size="1.778" layer="21">DO NOT MOVE RINGS, PIN HEADERS, OR PCB DIMMENSIONS. THEY ARE ACCURATELY PLACED</text>
 </plain>
 <libraries>
 <library name="SparkFun">
 <description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
 We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
 &lt;br&gt;&lt;br&gt;
 &lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
 <packages>
 <package name="1X10_LOCK">
 <wire x1="14.605" y1="1.27" x2="15.875" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="15.875" y1="1.27" x2="16.51" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="16.51" y1="-0.635" x2="15.875" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="11.43" y1="0.635" x2="12.065" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="12.065" y1="1.27" x2="13.335" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="13.335" y1="1.27" x2="13.97" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="13.97" y1="-0.635" x2="13.335" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="13.335" y1="-1.27" x2="12.065" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="12.065" y1="-1.27" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="14.605" y1="1.27" x2="13.97" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="13.97" y1="-0.635" x2="14.605" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="15.875" y1="-1.27" x2="14.605" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="6.985" y1="1.27" x2="8.255" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="8.255" y1="1.27" x2="8.89" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="8.89" y1="-0.635" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="8.89" y1="0.635" x2="9.525" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="9.525" y1="1.27" x2="10.795" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="10.795" y1="1.27" x2="11.43" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="11.43" y1="-0.635" x2="10.795" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="10.795" y1="-1.27" x2="9.525" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="9.525" y1="-1.27" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="6.985" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="8.255" y1="-1.27" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
@@ @@ -387,137 +388,137 @@ design rules under a new name.</descript @@
 <param name="cfBase.13" value="1"/>
 <param name="cfBase.14" value="1"/>
 <param name="cfBase.15" value="1"/>
 <param name="cfBase.16" value="0"/>
 <param name="mnVias" value="20"/>
 <param name="mnSegments" value="9999"/>
 <param name="mnExtdSteps" value="9999"/>
 <param name="mnRipupLevel" value="10"/>
 <param name="mnRipupSteps" value="100"/>
 <param name="mnRipupTotal" value="100"/>
 </pass>
 <pass name="Follow-me" refer="Default" active="yes">
 </pass>
 <pass name="Busses" refer="Default" active="yes">
 <param name="cfNonPref" value="4"/>
 <param name="cfBusImpact" value="4"/>
 <param name="cfHugging" value="0"/>
 <param name="mnVias" value="0"/>
 </pass>
 <pass name="Route" refer="Default" active="yes">
 </pass>
 <pass name="Optimize1" refer="Default" active="yes">
 <param name="cfVia" value="99"/>
 <param name="cfExtdStep" value="10"/>
 <param name="cfHugging" value="1"/>
 <param name="mnExtdSteps" value="1"/>
 <param name="mnRipupLevel" value="0"/>
 </pass>
 <pass name="Optimize2" refer="Optimize1" active="yes">
 <param name="cfNonPref" value="0"/>
 <param name="cfChangeDir" value="6"/>
 <param name="cfExtdStep" value="0"/>
 <param name="cfBonusStep" value="2"/>
 <param name="cfMalusStep" value="2"/>
 <param name="cfPadImpact" value="2"/>
 <param name="cfSmdImpact" value="2"/>
 <param name="cfHugging" value="0"/>
 </pass>
 <pass name="Optimize3" refer="Optimize2" active="yes">
 <param name="cfChangeDir" value="8"/>
 <param name="cfPadImpact" value="0"/>
 <param name="cfSmdImpact" value="0"/>
 </pass>
 <pass name="Optimize4" refer="Optimize3" active="yes">
 <param name="cfChangeDir" value="25"/>
 </pass>
 </autorouter>
 <elements>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="-38.1" y="49.53"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="-38.1" y="57.15"/>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="7.62" y="2.54" locked="yes"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="7.62" y="36.83" locked="yes"/>
 <element name="X1" library="SparkFun" package="USB-A-H" value="USB-A-H" x="-20.32" y="7.62"/>
 <element name="X2" library="SparkFun" package="USB-A-H" value="USB-A-H" x="-20.32" y="22.86"/>
 <element name="X3" library="SparkFun" package="USB-A-H" value="USB-A-H" x="-20.32" y="38.1"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="JP1" pad="1"/>
 <contactref element="X1" pad="GND"/>
 <contactref element="X2" pad="GND"/>
 <contactref element="X3" pad="GND"/>
 <wire x1="-17.92" y1="26.36" x2="-17.92" y2="41.6" width="0" layer="19" extent="1-1"/>
 <wire x1="-17.92" y1="11.12" x2="-17.92" y2="26.36" width="0" layer="19" extent="1-1"/>
-<wire x1="-38.1" y1="49.657" x2="-17.92" y2="41.6" width="0" layer="19" extent="1-1"/>
+<wire x1="7.62" y1="2.667" x2="-17.92" y2="41.6" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="VBAT">
 <contactref element="JP1" pad="2"/>
 </signal>
 <signal name="VCC">
 <contactref element="JP1" pad="3"/>
 </signal>
 <signal name="MOSI">
 <contactref element="JP1" pad="4"/>
 </signal>
 <signal name="MISO">
 <contactref element="JP1" pad="5"/>
 </signal>
 <signal name="SCK">
 <contactref element="JP1" pad="6"/>
 </signal>
 <signal name="PD4">
 <contactref element="JP1" pad="7"/>
 </signal>
 <signal name="PD5">
 <contactref element="JP1" pad="8"/>
 </signal>
 <signal name="PD6">
 <contactref element="JP1" pad="9"/>
 </signal>
 <signal name="PD7">
 <contactref element="JP1" pad="10"/>
 </signal>
 <signal name="SCL">
 <contactref element="JP2" pad="1"/>
 </signal>
 <signal name="SDA">
 <contactref element="JP2" pad="2"/>
 </signal>
 <signal name="PA0">
 <contactref element="JP2" pad="3"/>
 </signal>
 <signal name="PA1">
 <contactref element="JP2" pad="4"/>
 </signal>
 <signal name="PA2">
 <contactref element="JP2" pad="5"/>
 </signal>
 <signal name="PA3">
 <contactref element="JP2" pad="6"/>
 </signal>
 <signal name="PA4">
 <contactref element="JP2" pad="7"/>
 </signal>
 <signal name="PA5">
 <contactref element="JP2" pad="8"/>
 </signal>
 <signal name="PA6">
 <contactref element="JP2" pad="9"/>
 </signal>
 <signal name="PA7">
 <contactref element="JP2" pad="10"/>
 </signal>
 <signal name="N$1">
-<via x="38.1" y="95.25" extent="1-16" drill="3.2"/>
+<via x="15.24" y="48.26" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$2">
-<via x="52.07" y="95.25" extent="1-16" drill="3.2"/>
+<via x="29.21" y="48.26" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$3">
-<via x="68.58" y="95.25" extent="1-16" drill="3.2"/>
+<via x="45.72" y="48.26" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$4">
-<via x="83.82" y="95.25" extent="1-16" drill="3.2"/>
+<via x="60.96" y="48.26" extent="1-16" drill="3.2"/>
 </signal>
 </signals>
 </board>
 </drawing>
 </eagle>

slave-daughter/slave-daughter-gieger.brd

➞

Show inline comments

@@ @@ -58,99 +58,100 @@ @@
 <layer number="97" name="Info" color="7" fill="1" visible="no" active="no"/>
 <layer number="98" name="Guide" color="6" fill="1" visible="no" active="no"/>
 <layer number="100" name="Muster" color="7" fill="1" visible="no" active="no"/>
 <layer number="101" name="Patch_Top" color="12" fill="4" visible="no" active="yes"/>
 <layer number="102" name="Vscore" color="7" fill="1" visible="no" active="yes"/>
 <layer number="103" name="tMap" color="7" fill="1" visible="no" active="yes"/>
 <layer number="104" name="Name" color="16" fill="1" visible="no" active="yes"/>
 <layer number="105" name="tPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="106" name="bPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="107" name="Crop" color="7" fill="1" visible="no" active="yes"/>
 <layer number="116" name="Patch_BOT" color="9" fill="4" visible="no" active="yes"/>
 <layer number="121" name="_tsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="122" name="_bsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
 <layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
 <layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
 <layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
 <layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
 <layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
 <layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
 <layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
 <layer number="206" name="206bmp" color="7" fill="10" visible="no" active="yes"/>
 <layer number="207" name="207bmp" color="8" fill="10" visible="no" active="yes"/>
 <layer number="208" name="208bmp" color="9" fill="10" visible="no" active="yes"/>
 <layer number="209" name="209bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="210" name="210bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="211" name="211bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="212" name="212bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="213" name="213bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="214" name="214bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="215" name="215bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="216" name="216bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
 <layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
 <layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
 <layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
 <layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
 <layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
 <layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
 <layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
 <layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
 <layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
 <layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
 </layers>
 <board>
 <plain>
 <wire x1="0" y1="0" x2="100" y2="0" width="0" layer="20"/>
 <wire x1="100" y1="0" x2="100" y2="80" width="0" layer="20"/>
 <wire x1="100" y1="80" x2="0" y2="80" width="0" layer="20"/>
 <wire x1="0" y1="80" x2="0" y2="0" width="0" layer="20"/>
 <wire x1="100" y1="0" x2="100" y2="39.37" width="0" layer="20"/>
 <wire x1="100" y1="39.37" x2="0" y2="39.37" width="0" layer="20"/>
 <wire x1="0" y1="39.37" x2="0" y2="0" width="0" layer="20"/>
 <text x="-3.81" y="54.61" size="1.778" layer="21">DO NOT MOVE RINGS, PIN HEADERS, OR PCB DIMMENSIONS. THEY ARE ACCURATELY PLACED</text>
 </plain>
 <libraries>
 <library name="SparkFun">
 <description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
 We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
 &lt;br&gt;&lt;br&gt;
 &lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
 <packages>
 <package name="1X10_LOCK">
 <wire x1="14.605" y1="1.27" x2="15.875" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="15.875" y1="1.27" x2="16.51" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="16.51" y1="-0.635" x2="15.875" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="11.43" y1="0.635" x2="12.065" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="12.065" y1="1.27" x2="13.335" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="13.335" y1="1.27" x2="13.97" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="13.97" y1="-0.635" x2="13.335" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="13.335" y1="-1.27" x2="12.065" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="12.065" y1="-1.27" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="14.605" y1="1.27" x2="13.97" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="13.97" y1="-0.635" x2="14.605" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="15.875" y1="-1.27" x2="14.605" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="6.985" y1="1.27" x2="8.255" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="8.255" y1="1.27" x2="8.89" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="8.89" y1="-0.635" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="8.89" y1="0.635" x2="9.525" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="9.525" y1="1.27" x2="10.795" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="10.795" y1="1.27" x2="11.43" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="11.43" y1="-0.635" x2="10.795" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="10.795" y1="-1.27" x2="9.525" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="9.525" y1="-1.27" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="6.985" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="8.255" y1="-1.27" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
@@ @@ -361,129 +362,129 @@ design rules under a new name.</descript @@
 <param name="cfBase.13" value="1"/>
 <param name="cfBase.14" value="1"/>
 <param name="cfBase.15" value="1"/>
 <param name="cfBase.16" value="0"/>
 <param name="mnVias" value="20"/>
 <param name="mnSegments" value="9999"/>
 <param name="mnExtdSteps" value="9999"/>
 <param name="mnRipupLevel" value="10"/>
 <param name="mnRipupSteps" value="100"/>
 <param name="mnRipupTotal" value="100"/>
 </pass>
 <pass name="Follow-me" refer="Default" active="yes">
 </pass>
 <pass name="Busses" refer="Default" active="yes">
 <param name="cfNonPref" value="4"/>
 <param name="cfBusImpact" value="4"/>
 <param name="cfHugging" value="0"/>
 <param name="mnVias" value="0"/>
 </pass>
 <pass name="Route" refer="Default" active="yes">
 </pass>
 <pass name="Optimize1" refer="Default" active="yes">
 <param name="cfVia" value="99"/>
 <param name="cfExtdStep" value="10"/>
 <param name="cfHugging" value="1"/>
 <param name="mnExtdSteps" value="1"/>
 <param name="mnRipupLevel" value="0"/>
 </pass>
 <pass name="Optimize2" refer="Optimize1" active="yes">
 <param name="cfNonPref" value="0"/>
 <param name="cfChangeDir" value="6"/>
 <param name="cfExtdStep" value="0"/>
 <param name="cfBonusStep" value="2"/>
 <param name="cfMalusStep" value="2"/>
 <param name="cfPadImpact" value="2"/>
 <param name="cfSmdImpact" value="2"/>
 <param name="cfHugging" value="0"/>
 </pass>
 <pass name="Optimize3" refer="Optimize2" active="yes">
 <param name="cfChangeDir" value="8"/>
 <param name="cfPadImpact" value="0"/>
 <param name="cfSmdImpact" value="0"/>
 </pass>
 <pass name="Optimize4" refer="Optimize3" active="yes">
 <param name="cfChangeDir" value="25"/>
 </pass>
 </autorouter>
 <elements>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="-38.1" y="24.13"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="-38.1" y="31.75"/>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="7.62" y="2.54" locked="yes"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="7.62" y="36.83" locked="yes"/>
 <element name="U$1" library="SparkFun" package="GEIGER_TUBE" value="GEIGER_TUBELND712" x="-63.5" y="8.89"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="JP1" pad="1"/>
 </signal>
 <signal name="VBAT">
 <contactref element="JP1" pad="2"/>
 </signal>
 <signal name="VCC">
 <contactref element="JP1" pad="3"/>
 </signal>
 <signal name="MOSI">
 <contactref element="JP1" pad="4"/>
 </signal>
 <signal name="MISO">
 <contactref element="JP1" pad="5"/>
 </signal>
 <signal name="SCK">
 <contactref element="JP1" pad="6"/>
 </signal>
 <signal name="PD4">
 <contactref element="JP1" pad="7"/>
 </signal>
 <signal name="PD5">
 <contactref element="JP1" pad="8"/>
 </signal>
 <signal name="PD6">
 <contactref element="JP1" pad="9"/>
 </signal>
 <signal name="PD7">
 <contactref element="JP1" pad="10"/>
 </signal>
 <signal name="SCL">
 <contactref element="JP2" pad="1"/>
 </signal>
 <signal name="SDA">
 <contactref element="JP2" pad="2"/>
 </signal>
 <signal name="PA0">
 <contactref element="JP2" pad="3"/>
 </signal>
 <signal name="PA1">
 <contactref element="JP2" pad="4"/>
 </signal>
 <signal name="PA2">
 <contactref element="JP2" pad="5"/>
 </signal>
 <signal name="PA3">
 <contactref element="JP2" pad="6"/>
 </signal>
 <signal name="PA4">
 <contactref element="JP2" pad="7"/>
 </signal>
 <signal name="PA5">
 <contactref element="JP2" pad="8"/>
 </signal>
 <signal name="PA6">
 <contactref element="JP2" pad="9"/>
 </signal>
 <signal name="PA7">
 <contactref element="JP2" pad="10"/>
 </signal>
 <signal name="N$1">
-<via x="15.24" y="93.98" extent="1-16" drill="3.2"/>
+<via x="16.51" y="50.8" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$2">
-<via x="36.83" y="93.98" extent="1-16" drill="3.2"/>
+<via x="38.1" y="50.8" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$3">
-<via x="50.8" y="92.71" extent="1-16" drill="3.2"/>
+<via x="52.07" y="49.53" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$4">
-<via x="69.85" y="92.71" extent="1-16" drill="3.2"/>
+<via x="71.12" y="49.53" extent="1-16" drill="3.2"/>
 </signal>
 </signals>
 </board>
 </drawing>
 </eagle>

slave-daughter/slave-daughter-sensors.brd

➞

Show inline comments

@@ @@ -58,99 +58,100 @@ @@
 <layer number="97" name="Info" color="7" fill="1" visible="no" active="no"/>
 <layer number="98" name="Guide" color="6" fill="1" visible="no" active="no"/>
 <layer number="100" name="Muster" color="7" fill="1" visible="no" active="no"/>
 <layer number="101" name="Patch_Top" color="12" fill="4" visible="no" active="yes"/>
 <layer number="102" name="Vscore" color="7" fill="1" visible="no" active="yes"/>
 <layer number="103" name="tMap" color="7" fill="1" visible="no" active="yes"/>
 <layer number="104" name="Name" color="16" fill="1" visible="no" active="yes"/>
 <layer number="105" name="tPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="106" name="bPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="107" name="Crop" color="7" fill="1" visible="no" active="yes"/>
 <layer number="116" name="Patch_BOT" color="9" fill="4" visible="no" active="yes"/>
 <layer number="121" name="_tsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="122" name="_bsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
 <layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
 <layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
 <layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
 <layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
 <layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
 <layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
 <layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
 <layer number="206" name="206bmp" color="7" fill="10" visible="no" active="yes"/>
 <layer number="207" name="207bmp" color="8" fill="10" visible="no" active="yes"/>
 <layer number="208" name="208bmp" color="9" fill="10" visible="no" active="yes"/>
 <layer number="209" name="209bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="210" name="210bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="211" name="211bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="212" name="212bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="213" name="213bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="214" name="214bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="215" name="215bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="216" name="216bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
 <layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
 <layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
 <layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
 <layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
 <layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
 <layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
 <layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
 <layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
 <layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
 <layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
 </layers>
 <board>
 <plain>
 <wire x1="0" y1="0" x2="100" y2="0" width="0" layer="20"/>
 <wire x1="100" y1="0" x2="100" y2="80" width="0" layer="20"/>
 <wire x1="100" y1="80" x2="0" y2="80" width="0" layer="20"/>
 <wire x1="0" y1="80" x2="0" y2="0" width="0" layer="20"/>
 <wire x1="100" y1="0" x2="100" y2="39.37" width="0" layer="20"/>
 <wire x1="100" y1="39.37" x2="0" y2="39.37" width="0" layer="20"/>
 <wire x1="0" y1="39.37" x2="0" y2="0" width="0" layer="20"/>
 <text x="-13.97" y="43.18" size="1.778" layer="21">DO NOT MOVE RINGS, PIN HEADERS, OR PCB DIMMENSIONS. THEY ARE ACCURATELY PLACED</text>
 </plain>
 <libraries>
 <library name="SparkFun">
 <description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
 We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
 &lt;br&gt;&lt;br&gt;
 &lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
 <packages>
 <package name="1X10_LOCK">
 <wire x1="14.605" y1="1.27" x2="15.875" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="15.875" y1="1.27" x2="16.51" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="16.51" y1="-0.635" x2="15.875" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="11.43" y1="0.635" x2="12.065" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="12.065" y1="1.27" x2="13.335" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="13.335" y1="1.27" x2="13.97" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="13.97" y1="-0.635" x2="13.335" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="13.335" y1="-1.27" x2="12.065" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="12.065" y1="-1.27" x2="11.43" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="14.605" y1="1.27" x2="13.97" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="13.97" y1="-0.635" x2="14.605" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="15.875" y1="-1.27" x2="14.605" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="6.985" y1="1.27" x2="8.255" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="8.255" y1="1.27" x2="8.89" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="8.89" y1="-0.635" x2="8.255" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="8.89" y1="0.635" x2="9.525" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="9.525" y1="1.27" x2="10.795" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="10.795" y1="1.27" x2="11.43" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="11.43" y1="-0.635" x2="10.795" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="10.795" y1="-1.27" x2="9.525" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="9.525" y1="-1.27" x2="8.89" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="3.81" y1="0.635" x2="4.445" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="4.445" y1="1.27" x2="5.715" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="5.715" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="6.35" y1="-0.635" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="5.715" y1="-1.27" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="4.445" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="6.985" y1="1.27" x2="6.35" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="6.35" y1="-0.635" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="8.255" y1="-1.27" x2="6.985" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="-0.635" y1="1.27" x2="0.635" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="0.635" y1="1.27" x2="1.27" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="1.27" y1="-0.635" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="1.27" y1="0.635" x2="1.905" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="1.905" y1="1.27" x2="3.175" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="3.175" y1="1.27" x2="3.81" y2="0.635" width="0.2032" layer="21"/>
 <wire x1="3.81" y1="-0.635" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="3.175" y1="-1.27" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="1.905" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
@@ @@ -404,166 +405,166 @@ design rules under a new name.</descript @@
 <param name="cfBase.13" value="1"/>
 <param name="cfBase.14" value="1"/>
 <param name="cfBase.15" value="1"/>
 <param name="cfBase.16" value="0"/>
 <param name="mnVias" value="20"/>
 <param name="mnSegments" value="9999"/>
 <param name="mnExtdSteps" value="9999"/>
 <param name="mnRipupLevel" value="10"/>
 <param name="mnRipupSteps" value="100"/>
 <param name="mnRipupTotal" value="100"/>
 </pass>
 <pass name="Follow-me" refer="Default" active="yes">
 </pass>
 <pass name="Busses" refer="Default" active="yes">
 <param name="cfNonPref" value="4"/>
 <param name="cfBusImpact" value="4"/>
 <param name="cfHugging" value="0"/>
 <param name="mnVias" value="0"/>
 </pass>
 <pass name="Route" refer="Default" active="yes">
 </pass>
 <pass name="Optimize1" refer="Default" active="yes">
 <param name="cfVia" value="99"/>
 <param name="cfExtdStep" value="10"/>
 <param name="cfHugging" value="1"/>
 <param name="mnExtdSteps" value="1"/>
 <param name="mnRipupLevel" value="0"/>
 </pass>
 <pass name="Optimize2" refer="Optimize1" active="yes">
 <param name="cfNonPref" value="0"/>
 <param name="cfChangeDir" value="6"/>
 <param name="cfExtdStep" value="0"/>
 <param name="cfBonusStep" value="2"/>
 <param name="cfMalusStep" value="2"/>
 <param name="cfPadImpact" value="2"/>
 <param name="cfSmdImpact" value="2"/>
 <param name="cfHugging" value="0"/>
 </pass>
 <pass name="Optimize3" refer="Optimize2" active="yes">
 <param name="cfChangeDir" value="8"/>
 <param name="cfPadImpact" value="0"/>
 <param name="cfSmdImpact" value="0"/>
 </pass>
 <pass name="Optimize4" refer="Optimize3" active="yes">
 <param name="cfChangeDir" value="25"/>
 </pass>
 </autorouter>
 <elements>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="-38.1" y="21.59"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="-38.1" y="29.21"/>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="7.62" y="36.83" locked="yes"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="7.62" y="2.54" locked="yes"/>
 <element name="U$1" library="SeniorDesign" package="SOIC8" value="HIH6131-021-001" x="-17.78" y="3.81"/>
 <element name="U$2" library="SeniorDesign" package="MAX44009" value="MAX44009" x="-15.24" y="34.29"/>
 <element name="C1" library="SparkFun" package="0603-CAP" value="0.1uF" x="-17.78" y="35.56"/>
 <element name="C2" library="SparkFun" package="0603-CAP" value="0.22uF" x="-21.59" y="35.56"/>
 <element name="C3" library="SparkFun" package="0603-CAP" value="1uF" x="-25.4" y="35.56"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="U$1" pad="2"/>
 <contactref element="C1" pad="2"/>
 <contactref element="C2" pad="2"/>
 <contactref element="U$2" pad="2"/>
 <contactref element="U$2" pad="3"/>
 <contactref element="C3" pad="2"/>
 <contactref element="JP1" pad="1"/>
 <wire x1="-15.11" y1="35.29" x2="-16.93" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-15.11" y1="34.63" x2="-15.11" y2="35.29" width="0" layer="19" extent="1-1"/>
 <wire x1="-20.74" y1="35.56" x2="-16.93" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-24.55" y1="35.56" x2="-20.74" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-38.1" y1="21.717" x2="-24.55" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-18.415" y1="1.21" x2="-38.1" y2="21.717" width="0" layer="19" extent="1-1"/>
 <wire x1="7.62" y1="36.957" x2="-24.55" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-18.415" y1="1.21" x2="7.62" y2="36.957" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="VBAT">
 <contactref element="JP1" pad="2"/>
 </signal>
 <signal name="VCC">
 <contactref element="U$1" pad="8"/>
 <contactref element="C2" pad="1"/>
 <contactref element="U$2" pad="1"/>
 <contactref element="C3" pad="1"/>
 <contactref element="JP1" pad="3"/>
 <wire x1="-22.44" y1="35.56" x2="-15.11" y2="35.95" width="0" layer="19" extent="1-1"/>
 <wire x1="-26.25" y1="35.56" x2="-22.44" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-33.02" y1="21.717" x2="-26.25" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-19.685" y1="6.41" x2="-33.02" y2="21.717" width="0" layer="19" extent="1-1"/>
 <wire x1="12.7" y1="36.957" x2="-26.25" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-19.685" y1="6.41" x2="12.7" y2="36.957" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="MOSI">
 <contactref element="JP1" pad="4"/>
 </signal>
 <signal name="MISO">
 <contactref element="JP1" pad="5"/>
 </signal>
 <signal name="SCK">
 <contactref element="JP1" pad="6"/>
 </signal>
 <signal name="PD4">
 <contactref element="JP1" pad="7"/>
 </signal>
 <signal name="PD5">
 <contactref element="JP1" pad="8"/>
 </signal>
 <signal name="PD6">
 <contactref element="JP1" pad="9"/>
 </signal>
 <signal name="PD7">
 <contactref element="JP1" pad="10"/>
 </signal>
 <signal name="SCL">
 <contactref element="JP2" pad="1"/>
 <contactref element="U$1" pad="3"/>
 <contactref element="U$2" pad="5"/>
-<wire x1="-38.1" y1="29.337" x2="-13.35" y2="35.29" width="0" layer="19" extent="1-1"/>
+<wire x1="7.62" y1="2.667" x2="-13.35" y2="35.29" width="0" layer="19" extent="1-1"/>
 <wire x1="-17.145" y1="1.21" x2="-13.35" y2="35.29" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="SDA">
 <contactref element="JP2" pad="2"/>
 <contactref element="U$1" pad="4"/>
 <contactref element="U$2" pad="6"/>
 <wire x1="-35.56" y1="29.083" x2="-13.35" y2="35.95" width="0" layer="19" extent="1-1"/>
 <wire x1="-15.875" y1="1.21" x2="-35.56" y2="29.083" width="0" layer="19" extent="1-1"/>
 <wire x1="10.16" y1="2.413" x2="-13.35" y2="35.95" width="0" layer="19" extent="1-1"/>
 <wire x1="-15.875" y1="1.21" x2="10.16" y2="2.413" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA0">
 <contactref element="JP2" pad="3"/>
 </signal>
 <signal name="PA1">
 <contactref element="JP2" pad="4"/>
 </signal>
 <signal name="PA2">
 <contactref element="JP2" pad="5"/>
 </signal>
 <signal name="PA3">
 <contactref element="JP2" pad="6"/>
 </signal>
 <signal name="PA4">
 <contactref element="JP2" pad="7"/>
 </signal>
 <signal name="PA5">
 <contactref element="JP2" pad="8"/>
 </signal>
 <signal name="PA6">
 <contactref element="JP2" pad="9"/>
 </signal>
 <signal name="PA7">
 <contactref element="JP2" pad="10"/>
 </signal>
 <signal name="N$1">
 <contactref element="U$1" pad="1"/>
 <contactref element="C1" pad="1"/>
 <wire x1="-18.63" y1="35.56" x2="-19.685" y2="1.21" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$2">
-<via x="16.51" y="86.36" extent="1-16" drill="3.2"/>
+<via x="19.05" y="48.26" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$3">
-<via x="35.56" y="87.63" extent="1-16" drill="3.2"/>
+<via x="38.1" y="49.53" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$4">
-<via x="60.96" y="86.36" extent="1-16" drill="3.2"/>
+<via x="63.5" y="48.26" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$5">
-<via x="76.2" y="86.36" extent="1-16" drill="3.2"/>
+<via x="78.74" y="48.26" extent="1-16" drill="3.2"/>
 </signal>
 </signals>
 </board>
 </drawing>
 </eagle>

slave/slave.brd

➞

Show inline comments

@@ @@ -78,100 +78,101 @@ @@
 <layer number="123" name="tTestmark" color="7" fill="1" visible="no" active="yes"/>
 <layer number="124" name="bTestmark" color="7" fill="1" visible="no" active="yes"/>
 <layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="126" name="_bNames" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="127" name="_tValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="128" name="_bValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="131" name="tAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="132" name="bAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
 <layer number="146" name="p_Milling" color="3" fill="9" visible="yes" active="yes"/>
 <layer number="147" name="COVER" color="14" fill="1" visible="yes" active="yes"/>
 <layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
 <layer number="152" name="_bDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="190" name="Comments" color="12" fill="1" visible="yes" active="yes"/>
 <layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
 <layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
 <layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
 <layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
 <layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
 <layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
 <layer number="206" name="206bmp" color="7" fill="10" visible="no" active="yes"/>
 <layer number="207" name="207bmp" color="8" fill="10" visible="no" active="yes"/>
 <layer number="208" name="208bmp" color="9" fill="10" visible="no" active="yes"/>
 <layer number="209" name="209bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="210" name="210bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="211" name="211bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="212" name="212bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="213" name="213bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="214" name="214bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="215" name="215bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="216" name="216bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
 <layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
 <layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
 <layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
 <layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
 <layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
 <layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
 <layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
 <layer number="248" name="Housing" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="249" name="Edge" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
 <layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
 <layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
 </layers>
 <board>
 <plain>
 <wire x1="0" y1="0" x2="61.9" y2="0" width="0" layer="20"/>
 <wire x1="61.9" y1="0" x2="61.9" y2="39.36" width="0" layer="20"/>
 <wire x1="61.9" y1="39.36" x2="0" y2="39.36" width="0" layer="20"/>
 <wire x1="0" y1="39.36" x2="0" y2="0" width="0" layer="20"/>
 <wire x1="0" y1="0" x2="63.5" y2="0" width="0" layer="20"/>
 <wire x1="63.5" y1="0" x2="63.5" y2="39.37" width="0" layer="20"/>
 <wire x1="63.5" y1="39.37" x2="0" y2="39.37" width="0" layer="20"/>
 <wire x1="0" y1="39.37" x2="0" y2="0" width="0" layer="20"/>
 <text x="-19.812" y="44.704" size="1.778" layer="25">DO NOT MOVE RINGS, PIN HEADERS, OR PCB DIMMENSIONS. THEY ARE ACCURATELY PLACED</text>
 </plain>
 <libraries>
 <library name="SparkFun">
 <description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
 We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
 &lt;br&gt;&lt;br&gt;
 &lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
 <packages>
 <package name="XBEE-SMD">
 <wire x1="-5" y1="27.6" x2="5" y2="27.6" width="0.2032" layer="21"/>
 <wire x1="-12.25" y1="21.25" x2="-5" y2="27.6" width="0.2032" layer="21"/>
 <wire x1="12.25" y1="21.25" x2="5" y2="27.6" width="0.2032" layer="21"/>
 <wire x1="-12.25" y1="0.75" x2="-12.25" y2="0" width="0.2032" layer="21"/>
 <wire x1="12.25" y1="0.75" x2="12.25" y2="0" width="0.2032" layer="21"/>
 <wire x1="-12.25" y1="0" x2="12.25" y2="0" width="0.2032" layer="21"/>
 <wire x1="12.25" y1="0" x2="12.25" y2="-6.25" width="0.2032" layer="51"/>
 <wire x1="-12.25" y1="0" x2="-12.25" y2="-6.25" width="0.2032" layer="51"/>
 <wire x1="-12.25" y1="-6.25" x2="12.25" y2="-6.25" width="0.2032" layer="51"/>
 <wire x1="-12.25" y1="0.75" x2="-12.25" y2="21.25" width="0.2032" layer="51"/>
 <wire x1="-9.75" y1="21.25" x2="-9.75" y2="0.75" width="0.2032" layer="51"/>
 <wire x1="-12.25" y1="0.75" x2="-9.75" y2="0.75" width="0.2032" layer="51"/>
 <wire x1="-12.25" y1="21.25" x2="-9.75" y2="21.25" width="0.2032" layer="51"/>
 <wire x1="-12.25" y1="0.75" x2="-12.25" y2="1.3" width="0.2032" layer="21"/>
 <wire x1="-12.25" y1="0.75" x2="-9.75" y2="0.75" width="0.2032" layer="21"/>
 <wire x1="-9.75" y1="0.75" x2="-9.75" y2="1.3" width="0.2032" layer="21"/>
 <wire x1="-9.75" y1="20.6" x2="-9.75" y2="21.25" width="0.2032" layer="21"/>
 <wire x1="-9.75" y1="21.25" x2="-12.25" y2="21.25" width="0.2032" layer="21"/>
 <wire x1="-12.25" y1="21.25" x2="-12.25" y2="20.6" width="0.2032" layer="21"/>
 <wire x1="9.75" y1="0.75" x2="9.75" y2="21.25" width="0.2032" layer="51"/>
 <wire x1="12.25" y1="21.25" x2="12.25" y2="0.75" width="0.2032" layer="51"/>
 <wire x1="9.75" y1="0.75" x2="12.25" y2="0.75" width="0.2032" layer="51"/>
 <wire x1="9.75" y1="21.25" x2="12.25" y2="21.25" width="0.2032" layer="51"/>
 <wire x1="9.75" y1="0.75" x2="9.75" y2="1.3" width="0.2032" layer="21"/>
 <wire x1="9.75" y1="0.75" x2="12.25" y2="0.75" width="0.2032" layer="21"/>
 <wire x1="12.25" y1="0.75" x2="12.25" y2="1.3" width="0.2032" layer="21"/>
 <wire x1="12.25" y1="20.6" x2="12.25" y2="21.25" width="0.2032" layer="21"/>
 <wire x1="12.25" y1="21.25" x2="9.75" y2="21.25" width="0.2032" layer="21"/>
 <wire x1="9.75" y1="21.25" x2="9.75" y2="20.6" width="0.2032" layer="21"/>
 <smd name="10" x="-9.5" y="2" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="9" x="-12.5" y="4" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="8" x="-9.5" y="6" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="7" x="-12.5" y="8" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="6" x="-9.5" y="10" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="5" x="-12.5" y="12" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="4" x="-9.5" y="14" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="3" x="-12.5" y="16" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="2" x="-9.5" y="18" dx="0.85" dy="1.7" layer="1" rot="R90"/>
 <smd name="1" x="-12.5" y="20" dx="0.85" dy="1.7" layer="1" rot="R90"/>
@@ @@ -883,510 +884,510 @@ design rules under a new name.</descript @@
 <pass name="Follow-me" refer="Default" active="yes">
 </pass>
 <pass name="Busses" refer="Default" active="yes">
 <param name="cfNonPref" value="4"/>
 <param name="cfBusImpact" value="4"/>
 <param name="cfHugging" value="0"/>
 <param name="mnVias" value="0"/>
 </pass>
 <pass name="Route" refer="Default" active="yes">
 </pass>
 <pass name="Optimize1" refer="Default" active="yes">
 <param name="cfVia" value="99"/>
 <param name="cfExtdStep" value="10"/>
 <param name="cfHugging" value="1"/>
 <param name="mnExtdSteps" value="1"/>
 <param name="mnRipupLevel" value="0"/>
 </pass>
 <pass name="Optimize2" refer="Optimize1" active="yes">
 <param name="cfNonPref" value="0"/>
 <param name="cfChangeDir" value="6"/>
 <param name="cfExtdStep" value="0"/>
 <param name="cfBonusStep" value="2"/>
 <param name="cfMalusStep" value="2"/>
 <param name="cfPadImpact" value="2"/>
 <param name="cfSmdImpact" value="2"/>
 <param name="cfHugging" value="0"/>
 </pass>
 <pass name="Optimize3" refer="Optimize2" active="yes">
 <param name="cfChangeDir" value="8"/>
 <param name="cfPadImpact" value="0"/>
 <param name="cfSmdImpact" value="0"/>
 </pass>
 <pass name="Optimize4" refer="Optimize3" active="yes">
 <param name="cfChangeDir" value="25"/>
 </pass>
 </autorouter>
 <elements>
 <element name="U$1" library="SparkFun" package="XBEE-SMD" value="XBEE-1B3" x="49.53" y="19.685" rot="MR270"/>
 <element name="IC1" library="atmel" package="TQFP44" value="ATMEGA644A" x="23.749" y="19.685">
 <attribute name="OC_NEWARK" value="58M3748" x="77.089" y="9.525" size="1.778" layer="27" display="off"/>
 <attribute name="MPN" value="ATMEGA644PV-10AU" x="77.089" y="9.525" size="1.778" layer="27" display="off"/>
 <attribute name="MF" value="" x="77.089" y="9.525" size="1.778" layer="27" display="off"/>
 <attribute name="OC_FARNELL" value="1455123" x="77.089" y="9.525" size="1.778" layer="27" display="off"/>
 </element>
 <element name="R1" library="SparkFun" package="0603-RES" value="10k" x="39.624" y="14.224" rot="R270"/>
 <element name="C4" library="SparkFun" package="0603-CAP" value="8.2pF" x="45.466" y="24.892" rot="R90"/>
 <element name="C5" library="SparkFun" package="0603-CAP" value="1uF" x="43.18" y="24.892" rot="R90"/>
 <element name="3.3V_SWITCHING" library="SeniorDesign" package="SOIC8HEAT" value="IFX91041EJ V33" x="55.626" y="21.844" rot="R270"/>
 <element name="BATT" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="49.53" y="3.048" rot="R180"/>
 <element name="Q6" library="transistor-small-signal" package="SOT23" value="BSH202" x="48.768" y="7.366" rot="R90"/>
 <element name="BATT" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="52.832" y="2.794" rot="R180"/>
 <element name="Q6" library="transistor-small-signal" package="SOT23" value="BSH202" x="50.292" y="7.874" rot="R90"/>
 <element name="C8" library="SparkFun" package="0805" value="100uF" x="39.624" y="25.654" rot="R90"/>
 <element name="C9" library="SparkFun" package="0603-CAP" value="22nF" x="39.624" y="20.574" rot="R180"/>
 <element name="R2" library="SparkFun" package="0603-RES" value="22k" x="44.196" y="20.066" rot="R90"/>
 <element name="C10" library="SparkFun" package="0603-CAP" value="220nF" x="48.26" y="17.018" rot="R180"/>
 <element name="L3" library="SparkFun" package="SRU1038" value="47uH" x="55.118" y="13.716"/>
 <element name="D1" library="SparkFun" package="SMA-DIODE" value="DIODE-SCHOTTKY" x="49.022" y="21.59" rot="R270"/>
 <element name="C11" library="SparkFun" package="0603-CAP" value="220nF" x="39.624" y="18.034" rot="R180"/>
 <element name="C12" library="SparkFun" package="0805" value="100uF" x="39.624" y="23.114" rot="R180"/>
-<element name="ROTARY_DIP" library="SeniorDesign" package="CD08RM0SB" value="CD08RM0SB" x="59.182" y="28.448" rot="R90"/>
+<element name="ROTARY_DIP" library="SeniorDesign" package="CD08RM0SB" value="CD08RM0SB" x="59.436" y="27.432" rot="R90"/>
 <element name="TEMP" library="SeniorDesign" package="SOT23-5" value="MCP9800" x="29.718" y="8.382"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="21.336" y="36.83"/>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="16.764" y="2.54"/>
 <element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="20.32" y="36.83" locked="yes"/>
 <element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="20.32" y="2.54" locked="yes"/>
 <element name="C13" library="SparkFun" package="0603-CAP" value="18pf" x="33.782" y="14.478" rot="R270"/>
 <element name="C14" library="SparkFun" package="0603-CAP" value="18pf" x="36.322" y="14.478" rot="R270"/>
 <element name="Y2" library="SparkFun" package="CRYSTAL-SMD-5X3" value="11.0592MHz" x="17.526" y="9.398" rot="R180"/>
 <element name="C15" library="SparkFun" package="0603-CAP" value=".1uF" x="36.322" y="18.288" rot="R270"/>
 <element name="L2" library="SparkFun" package="0603" value="10uH" x="33.782" y="18.288" rot="R90"/>
 <element name="C16" library="SparkFun" package="0603-CAP" value=".1uF" x="35.052" y="20.828"/>
 <element name="C17" library="SparkFun" package="0603-CAP" value=".1uF" x="35.052" y="23.368"/>
 <element name="C18" library="SparkFun" package="0603-CAP" value="10uF" x="2.54" y="23.114" rot="R180"/>
 <element name="ICSP" library="SparkFun" package="2X3-NS" value="AVR_SPI_PRG_6NS" x="6.096" y="34.544"/>
 <element name="C18" library="SparkFun" package="0603-CAP" value="10uF" x="2.54" y="23.114"/>
 <element name="ICSP" library="SparkFun" package="2X3-NS" value="AVR_SPI_PRG_6NS" x="5.842" y="29.464"/>
 <element name="R6" library="SparkFun" package="0603-RES" value="4.7k" x="2.54" y="20.574" rot="R180"/>
 <element name="R7" library="SparkFun" package="0603-RES" value="4.7k" x="2.54" y="18.034" rot="R180"/>
 <element name="LED1" library="adafruit" package="CHIPLED_0603" value="AMBER" x="7.366" y="23.368" rot="R90"/>
 <element name="R8" library="SparkFun" package="0603-RES" value="10K" x="11.43" y="7.112"/>
 <element name="R9" library="SparkFun" package="0603-RES" value="10K" x="35.052" y="25.908" rot="R180"/>
 <element name="R10" library="SparkFun" package="0603-RES" value="1M" x="27.432" y="32.004" rot="R270"/>
 <element name="R11" library="SparkFun" package="R2512" value="" x="20.828" y="29.718"/>
 <element name="C19" library="SparkFun" package="0603-CAP" value=".1uF" x="13.716" y="31.496"/>
 <element name="Q1" library="SparkFun" package="SOT23-3" value="MOSFET-PCHANNELSMD" x="30.988" y="31.75" rot="R180"/>
 <element name="Q2" library="transistor-npn" package="SOT23-BEC" value="BC849SMD" x="34.798" y="31.75"/>
 <element name="R12" library="SparkFun" package="0603-RES" value="10K" x="11.684" y="20.828"/>
 <element name="R13" library="SparkFun" package="0603-RES" value="10K" x="11.684" y="18.288"/>
 <element name="R14" library="SparkFun" package="0603-RES" value="10K" x="11.684" y="15.748"/>
 <element name="R15" library="SparkFun" package="0603-RES" value="10K" x="11.684" y="13.208"/>
 <element name="LED2" library="adafruit" package="CHIPLED_0603" value="BLUE" x="7.366" y="20.828" rot="R90"/>
 <element name="LED3" library="adafruit" package="CHIPLED_0603" value="GREEN" x="7.366" y="18.288" rot="R90"/>
 <element name="LED4" library="adafruit" package="CHIPLED_0603" value="WHITE" x="7.366" y="15.748" rot="R90"/>
 <element name="LED5" library="adafruit" package="CHIPLED_0603" value="RED" x="7.366" y="13.208" rot="R90"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="U$1" pad="10"/>
 <contactref element="IC1" pad="18"/>
 <contactref element="IC1" pad="6"/>
 <contactref element="IC1" pad="28"/>
 <contactref element="IC1" pad="39"/>
 <contactref element="3.3V_SWITCHING" pad="2"/>
 <contactref element="3.3V_SWITCHING" pad="9"/>
 <contactref element="C8" pad="2"/>
 <contactref element="3.3V_SWITCHING" pad="1"/>
 <contactref element="BATT" pad="2"/>
 <contactref element="Q6" pad="1"/>
 <contactref element="R2" pad="1"/>
 <contactref element="D1" pad="A"/>
 <contactref element="C11" pad="2"/>
 <contactref element="C12" pad="2"/>
 <contactref element="IC1" pad="6"/>
 <contactref element="IC1" pad="18"/>
 <contactref element="IC1" pad="28"/>
 <contactref element="IC1" pad="39"/>
 <contactref element="C14" pad="1"/>
 <contactref element="C13" pad="1"/>
 <contactref element="C15" pad="1"/>
 <contactref element="C18" pad="2"/>
 <contactref element="C17" pad="2"/>
 <contactref element="C16" pad="2"/>
 <contactref element="ICSP" pad="6"/>
 <contactref element="U$1" pad="10"/>
 <contactref element="ROTARY_DIP" pad="C2"/>
 <contactref element="ROTARY_DIP" pad="C1"/>
 <contactref element="JP1" pad="1"/>
 <contactref element="LED1" pad="C"/>
 <contactref element="Q2" pad="E"/>
 <contactref element="R11" pad="1"/>
 <contactref element="LED2" pad="C"/>
 <contactref element="LED3" pad="C"/>
 <contactref element="LED4" pad="C"/>
 <contactref element="LED5" pad="C"/>
 <contactref element="C4" pad="2"/>
 <contactref element="C5" pad="2"/>
 <contactref element="TEMP" pad="2"/>
 <contactref element="C19" pad="2"/>
 <wire x1="47.53" y1="29.185" x2="55.1815" y2="37.084" width="0" layer="19" extent="1-16"/>
 <wire x1="55.1815" y1="27.813" x2="47.53" y2="29.185" width="0" layer="19" extent="1-16"/>
 <wire x1="47.53" y1="29.185" x2="55.4355" y2="36.068" width="0" layer="19" extent="1-16"/>
 <wire x1="55.4355" y1="26.797" x2="47.53" y2="29.185" width="0" layer="19" extent="1-16"/>
 <wire x1="45.466" y1="25.742" x2="47.53" y2="29.185" width="0" layer="19" extent="1-16"/>
 <wire x1="43.18" y1="25.742" x2="45.466" y2="25.742" width="0" layer="19" extent="1-1"/>
 <wire x1="39.624" y1="26.554" x2="43.18" y2="25.742" width="0" layer="19" extent="1-1"/>
 <wire x1="38.724" y1="23.114" x2="39.624" y2="26.554" width="0" layer="19" extent="1-1"/>
 <wire x1="35.902" y1="23.368" x2="38.724" y2="23.114" width="0" layer="19" extent="1-1"/>
 <wire x1="35.902" y1="20.828" x2="35.902" y2="23.368" width="0" layer="19" extent="1-1"/>
 <wire x1="36.322" y1="19.138" x2="35.902" y2="20.828" width="0" layer="19" extent="1-1"/>
 <wire x1="38.774" y1="18.034" x2="36.322" y2="19.138" width="0" layer="19" extent="1-1"/>
 <wire x1="36.322" y1="15.328" x2="38.774" y2="18.034" width="0" layer="19" extent="1-1"/>
 <wire x1="33.782" y1="15.328" x2="36.322" y2="15.328" width="0" layer="19" extent="1-1"/>
 <wire x1="49.022" y1="23.74" x2="45.466" y2="25.742" width="0" layer="19" extent="1-1"/>
 <wire x1="53.026" y1="23.749" x2="49.022" y2="23.74" width="0" layer="19" extent="1-1"/>
 <wire x1="53.026" y1="22.479" x2="53.026" y2="23.749" width="0" layer="19" extent="1-1"/>
 <wire x1="55.626" y1="21.844" x2="53.026" y2="22.479" width="0" layer="19" extent="1-1"/>
 <wire x1="44.196" y1="19.216" x2="38.774" y2="18.034" width="0" layer="19" extent="1-1"/>
-<wire x1="49.868" y1="6.416" x2="44.196" y2="19.216" width="0" layer="19" extent="1-1"/>
+<wire x1="51.392" y1="6.924" x2="44.196" y2="19.216" width="0" layer="19" extent="1-1"/>
 <wire x1="35.748" y1="30.65" x2="39.624" y2="26.554" width="0" layer="19" extent="1-1"/>
 <wire x1="29.549" y1="19.685" x2="33.782" y2="15.328" width="0" layer="19" extent="1-1"/>
 <wire x1="24.549" y1="13.885" x2="29.549" y2="19.685" width="0" layer="19" extent="1-1"/>
 <wire x1="23.749" y1="25.485" x2="29.549" y2="19.685" width="0" layer="19" extent="1-1"/>
 <wire x1="18.028" y1="29.718" x2="23.749" y2="25.485" width="0" layer="19" extent="1-1"/>
 <wire x1="14.566" y1="31.496" x2="18.028" y2="29.718" width="0" layer="19" extent="1-1"/>
 <wire x1="8.636" y1="35.814" x2="14.566" y2="31.496" width="0" layer="19" extent="1-1"/>
 <wire x1="6.616" y1="23.368" x2="8.636" y2="35.814" width="0" layer="19" extent="1-1"/>
 <wire x1="8.382" y1="30.734" x2="14.566" y2="31.496" width="0" layer="19" extent="1-1"/>
 <wire x1="6.616" y1="23.368" x2="8.382" y2="30.734" width="0" layer="19" extent="1-1"/>
 <wire x1="6.616" y1="20.828" x2="6.616" y2="23.368" width="0" layer="19" extent="1-1"/>
 <wire x1="6.616" y1="18.288" x2="6.616" y2="20.828" width="0" layer="19" extent="1-1"/>
 <wire x1="6.616" y1="15.748" x2="6.616" y2="18.288" width="0" layer="19" extent="1-1"/>
 <wire x1="6.616" y1="13.208" x2="6.616" y2="15.748" width="0" layer="19" extent="1-1"/>
-<wire x1="1.69" y1="23.114" x2="6.616" y2="23.368" width="0" layer="19" extent="1-1"/>
+<wire x1="3.39" y1="23.114" x2="6.616" y2="23.368" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="19.685" x2="23.749" y2="25.485" width="0" layer="19" extent="1-1"/>
-<wire x1="49.53" y1="3.068" x2="49.868" y2="6.416" width="0" layer="19" extent="1-1"/>
+<wire x1="52.832" y1="2.814" x2="51.392" y2="6.924" width="0" layer="19" extent="1-1"/>
 <wire x1="29.718" y1="7.092" x2="24.549" y2="13.885" width="0" layer="19" extent="1-1"/>
-<wire x1="16.764" y1="2.667" x2="24.549" y2="13.885" width="0" layer="19" extent="1-1"/>
+<wire x1="20.32" y1="2.667" x2="24.549" y2="13.885" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="VCC">
 <contactref element="IC1" pad="38"/>
 <contactref element="IC1" pad="17"/>
 <contactref element="IC1" pad="5"/>
 <contactref element="R1" pad="1"/>
 <contactref element="L3" pad="2"/>
 <contactref element="3.3V_SWITCHING" pad="4"/>
 <contactref element="C11" pad="1"/>
 <contactref element="C12" pad="1"/>
 <contactref element="L2" pad="2"/>
 <contactref element="C18" pad="1"/>
 <contactref element="C17" pad="1"/>
 <contactref element="C16" pad="1"/>
 <contactref element="R7" pad="2"/>
 <contactref element="R6" pad="2"/>
 <contactref element="ICSP" pad="2"/>
 <contactref element="JP1" pad="3"/>
 <contactref element="U$1" pad="1"/>
 <contactref element="C4" pad="1"/>
 <contactref element="C5" pad="1"/>
 <contactref element="TEMP" pad="1"/>
 <contactref element="C19" pad="1"/>
 <wire x1="53.026" y1="19.939" x2="59.618" y2="13.716" width="0" layer="19" extent="1-1"/>
 <wire x1="45.466" y1="24.042" x2="53.026" y2="19.939" width="0" layer="19" extent="1-1"/>
 <wire x1="43.18" y1="24.042" x2="45.466" y2="24.042" width="0" layer="19" extent="1-1"/>
 <wire x1="40.524" y1="23.114" x2="43.18" y2="24.042" width="0" layer="19" extent="1-1"/>
 <wire x1="40.474" y1="18.034" x2="40.524" y2="23.114" width="0" layer="19" extent="1-1"/>
 <wire x1="39.624" y1="15.074" x2="40.474" y2="18.034" width="0" layer="19" extent="1-1"/>
 <wire x1="34.202" y1="23.368" x2="40.524" y2="23.114" width="0" layer="19" extent="1-1"/>
 <wire x1="34.202" y1="20.828" x2="34.202" y2="23.368" width="0" layer="19" extent="1-1"/>
 <wire x1="33.782" y1="19.138" x2="34.202" y2="20.828" width="0" layer="19" extent="1-1"/>
 <wire x1="24.549" y1="25.485" x2="34.202" y2="23.368" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="20.485" x2="24.549" y2="25.485" width="0" layer="19" extent="1-1"/>
 <wire x1="29.53" y1="32.185" x2="24.549" y2="25.485" width="0" layer="19" extent="1-16"/>
 <wire x1="23.749" y1="13.885" x2="17.949" y2="20.485" width="0" layer="19" extent="1-1"/>
 <wire x1="28.768" y1="7.092" x2="23.749" y2="13.885" width="0" layer="19" extent="1-1"/>
-<wire x1="21.844" y1="2.667" x2="28.768" y2="7.092" width="0" layer="19" extent="1-1"/>
+<wire x1="25.4" y1="2.667" x2="28.768" y2="7.092" width="0" layer="19" extent="1-1"/>
 <wire x1="12.866" y1="31.496" x2="17.949" y2="20.485" width="0" layer="19" extent="1-1"/>
 <wire x1="3.556" y1="35.814" x2="12.866" y2="31.496" width="0" layer="19" extent="1-1"/>
 <wire x1="3.39" y1="23.114" x2="3.556" y2="35.814" width="0" layer="19" extent="1-1"/>
 <wire x1="1.69" y1="20.574" x2="3.39" y2="23.114" width="0" layer="19" extent="1-1"/>
 <wire x1="3.302" y1="30.734" x2="12.866" y2="31.496" width="0" layer="19" extent="1-1"/>
 <wire x1="1.69" y1="23.114" x2="3.302" y2="30.734" width="0" layer="19" extent="1-1"/>
 <wire x1="1.69" y1="20.574" x2="1.69" y2="23.114" width="0" layer="19" extent="1-1"/>
 <wire x1="1.69" y1="18.034" x2="1.69" y2="20.574" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="RESET">
 <contactref element="R1" pad="2"/>
 <contactref element="IC1" pad="4"/>
 <contactref element="ICSP" pad="5"/>
-<wire x1="17.949" y1="21.285" x2="8.636" y2="33.274" width="0" layer="19" extent="1-1"/>
+<wire x1="17.949" y1="21.285" x2="8.382" y2="28.194" width="0" layer="19" extent="1-1"/>
 <wire x1="39.624" y1="13.374" x2="17.949" y2="21.285" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$2">
 <contactref element="BATT" pad="1"/>
 <contactref element="Q6" pad="3"/>
-<wire x1="47.668" y1="7.366" x2="48.03" y2="3.068" width="0" layer="19" extent="1-1"/>
+<wire x1="49.192" y1="7.874" x2="51.332" y2="2.814" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="VBAT">
 <contactref element="Q6" pad="2"/>
 <contactref element="3.3V_SWITCHING" pad="8"/>
 <contactref element="3.3V_SWITCHING" pad="7"/>
 <contactref element="C8" pad="1"/>
 <contactref element="JP1" pad="2"/>
 <contactref element="R10" pad="2"/>
 <contactref element="Q1" pad="2"/>
 <wire x1="27.432" y1="31.154" x2="30.038" y2="32.75" width="0" layer="19" extent="1-1"/>
 <wire x1="49.868" y1="8.316" x2="27.432" y2="31.154" width="0" layer="19" extent="1-1"/>
 <wire x1="58.226" y1="22.479" x2="49.868" y2="8.316" width="0" layer="19" extent="1-1"/>
 <wire x1="51.392" y1="8.824" x2="27.432" y2="31.154" width="0" layer="19" extent="1-1"/>
 <wire x1="58.226" y1="22.479" x2="51.392" y2="8.824" width="0" layer="19" extent="1-1"/>
 <wire x1="58.226" y1="23.749" x2="58.226" y2="22.479" width="0" layer="19" extent="1-1"/>
-<wire x1="19.304" y1="2.413" x2="49.868" y2="8.316" width="0" layer="19" extent="1-1"/>
+<wire x1="22.86" y1="2.413" x2="51.392" y2="8.824" width="0" layer="19" extent="1-1"/>
 <wire x1="39.624" y1="24.754" x2="58.226" y2="23.749" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$3">
 <contactref element="R2" pad="2"/>
 <contactref element="C9" pad="2"/>
 <wire x1="44.196" y1="20.916" x2="38.774" y2="20.574" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$4">
 <contactref element="3.3V_SWITCHING" pad="3"/>
 <contactref element="C9" pad="1"/>
 <wire x1="53.026" y1="21.209" x2="40.474" y2="20.574" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$5">
 <contactref element="3.3V_SWITCHING" pad="5"/>
 <contactref element="C10" pad="1"/>
 <wire x1="49.11" y1="17.018" x2="58.226" y2="19.939" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$6">
 <contactref element="3.3V_SWITCHING" pad="6"/>
 <contactref element="C10" pad="2"/>
 <contactref element="L3" pad="1"/>
 <contactref element="D1" pad="C"/>
 <wire x1="58.226" y1="21.209" x2="49.022" y2="19.44" width="0" layer="19" extent="1-1"/>
 <wire x1="47.41" y1="17.018" x2="49.022" y2="19.44" width="0" layer="19" extent="1-1"/>
 <wire x1="50.618" y1="13.716" x2="47.41" y2="17.018" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="SDA">
 <contactref element="IC1" pad="20"/>
 <contactref element="JP2" pad="2"/>
 <contactref element="TEMP" pad="5"/>
 <contactref element="R7" pad="1"/>
-<wire x1="26.149" y1="13.885" x2="23.876" y2="36.703" width="0" layer="19" extent="1-1"/>
+<wire x1="26.149" y1="13.885" x2="22.86" y2="36.703" width="0" layer="19" extent="1-1"/>
 <wire x1="28.768" y1="9.682" x2="26.149" y2="13.885" width="0" layer="19" extent="1-1"/>
 <wire x1="3.39" y1="18.034" x2="26.149" y2="13.885" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="SCL">
 <contactref element="IC1" pad="19"/>
 <contactref element="JP2" pad="1"/>
 <contactref element="TEMP" pad="4"/>
 <contactref element="R6" pad="1"/>
-<wire x1="25.349" y1="13.885" x2="21.336" y2="36.957" width="0" layer="19" extent="1-1"/>
+<wire x1="25.349" y1="13.885" x2="20.32" y2="36.957" width="0" layer="19" extent="1-1"/>
 <wire x1="30.668" y1="9.682" x2="25.349" y2="13.885" width="0" layer="19" extent="1-1"/>
 <wire x1="3.39" y1="20.574" x2="25.349" y2="13.885" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA0">
 <contactref element="IC1" pad="37"/>
 <contactref element="JP2" pad="3"/>
-<wire x1="26.416" y1="36.957" x2="25.349" y2="25.485" width="0" layer="19" extent="1-1"/>
+<wire x1="25.4" y1="36.957" x2="25.349" y2="25.485" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA1">
 <contactref element="IC1" pad="36"/>
 <contactref element="JP2" pad="4"/>
-<wire x1="28.956" y1="36.703" x2="26.149" y2="25.485" width="0" layer="19" extent="1-1"/>
+<wire x1="27.94" y1="36.703" x2="26.149" y2="25.485" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA2">
 <contactref element="IC1" pad="35"/>
 <contactref element="JP2" pad="5"/>
-<wire x1="31.496" y1="36.957" x2="26.949" y2="25.485" width="0" layer="19" extent="1-1"/>
+<wire x1="30.48" y1="36.957" x2="26.949" y2="25.485" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA3">
 <contactref element="IC1" pad="34"/>
 <contactref element="JP2" pad="6"/>
-<wire x1="34.036" y1="36.703" x2="27.749" y2="25.485" width="0" layer="19" extent="1-1"/>
+<wire x1="33.02" y1="36.703" x2="27.749" y2="25.485" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA4">
 <contactref element="IC1" pad="33"/>
 <contactref element="JP2" pad="7"/>
-<wire x1="36.576" y1="36.957" x2="29.549" y2="23.685" width="0" layer="19" extent="1-1"/>
+<wire x1="35.56" y1="36.957" x2="29.549" y2="23.685" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA5">
 <contactref element="IC1" pad="32"/>
 <contactref element="JP2" pad="8"/>
-<wire x1="39.116" y1="36.703" x2="29.549" y2="22.885" width="0" layer="19" extent="1-1"/>
+<wire x1="38.1" y1="36.703" x2="29.549" y2="22.885" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA6">
 <contactref element="IC1" pad="31"/>
 <contactref element="JP2" pad="9"/>
-<wire x1="41.656" y1="36.957" x2="29.549" y2="22.085" width="0" layer="19" extent="1-1"/>
+<wire x1="40.64" y1="36.957" x2="29.549" y2="22.085" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA7">
 <contactref element="IC1" pad="30"/>
 <contactref element="JP2" pad="10"/>
-<wire x1="44.196" y1="36.703" x2="29.549" y2="21.285" width="0" layer="19" extent="1-1"/>
+<wire x1="43.18" y1="36.703" x2="29.549" y2="21.285" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="SCK">
 <contactref element="IC1" pad="3"/>
 <contactref element="ICSP" pad="3"/>
 <contactref element="JP1" pad="6"/>
 <wire x1="29.464" y1="2.413" x2="6.096" y2="33.274" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="22.085" x2="29.464" y2="2.413" width="0" layer="19" extent="1-1"/>
 <wire x1="33.02" y1="2.413" x2="5.842" y2="28.194" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="22.085" x2="33.02" y2="2.413" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="MISO">
 <contactref element="IC1" pad="2"/>
 <contactref element="ICSP" pad="1"/>
 <contactref element="JP1" pad="5"/>
 <wire x1="26.924" y1="2.667" x2="3.556" y2="33.274" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="22.885" x2="26.924" y2="2.667" width="0" layer="19" extent="1-1"/>
 <wire x1="30.48" y1="2.667" x2="3.302" y2="28.194" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="22.885" x2="30.48" y2="2.667" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="MOSI">
 <contactref element="IC1" pad="1"/>
 <contactref element="ICSP" pad="4"/>
 <contactref element="JP1" pad="4"/>
 <wire x1="24.384" y1="2.413" x2="6.096" y2="35.814" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="23.685" x2="24.384" y2="2.413" width="0" layer="19" extent="1-1"/>
 <wire x1="27.94" y1="2.413" x2="5.842" y2="30.734" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="23.685" x2="27.94" y2="2.413" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$10">
 <contactref element="Y2" pad="3"/>
 <contactref element="C14" pad="2"/>
 <contactref element="IC1" pad="7"/>
 <wire x1="15.676" y1="8.248" x2="36.322" y2="13.628" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="18.885" x2="15.676" y2="8.248" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$11">
 <contactref element="Y2" pad="1"/>
 <contactref element="C13" pad="2"/>
 <contactref element="IC1" pad="8"/>
 <wire x1="19.376" y1="10.548" x2="33.782" y2="13.628" width="0" layer="19" extent="1-1"/>
 <wire x1="17.949" y1="18.085" x2="19.376" y2="10.548" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$12">
 <contactref element="C15" pad="2"/>
 <contactref element="IC1" pad="29"/>
 <wire x1="29.549" y1="20.485" x2="36.322" y2="17.438" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$13">
 <contactref element="L2" pad="1"/>
 <contactref element="IC1" pad="27"/>
 <wire x1="29.549" y1="18.885" x2="33.782" y2="17.438" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="RXD0">
 <contactref element="IC1" pad="9"/>
 <contactref element="U$1" pad="2"/>
 <wire x1="17.949" y1="17.285" x2="31.53" y2="29.185" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="TXD0">
 <contactref element="IC1" pad="10"/>
 <contactref element="U$1" pad="3"/>
 <wire x1="17.949" y1="16.485" x2="33.53" y2="32.185" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="RXD1">
 <contactref element="IC1" pad="11"/>
 </signal>
 <signal name="TXD1">
 <contactref element="IC1" pad="12"/>
 </signal>
 <signal name="PD7">
 <contactref element="IC1" pad="16"/>
 <contactref element="JP1" pad="10"/>
-<wire x1="39.624" y1="2.413" x2="22.949" y2="13.885" width="0" layer="19" extent="1-1"/>
+<wire x1="43.18" y1="2.413" x2="22.949" y2="13.885" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PD6">
 <contactref element="IC1" pad="15"/>
 <contactref element="JP1" pad="9"/>
-<wire x1="37.084" y1="2.667" x2="22.149" y2="13.885" width="0" layer="19" extent="1-1"/>
+<wire x1="40.64" y1="2.667" x2="22.149" y2="13.885" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PD5">
 <contactref element="IC1" pad="14"/>
 <contactref element="JP1" pad="8"/>
-<wire x1="21.349" y1="13.885" x2="34.544" y2="2.413" width="0" layer="19" extent="1-1"/>
+<wire x1="21.349" y1="13.885" x2="38.1" y2="2.413" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PD4">
 <contactref element="IC1" pad="13"/>
 <contactref element="JP1" pad="7"/>
-<wire x1="20.549" y1="13.885" x2="32.004" y2="2.667" width="0" layer="19" extent="1-1"/>
+<wire x1="20.549" y1="13.885" x2="35.56" y2="2.667" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="DIP1">
 <contactref element="ROTARY_DIP" pad="2"/>
 <contactref element="IC1" pad="24"/>
-<wire x1="57.7215" y1="37.084" x2="29.549" y2="16.485" width="0" layer="19" extent="1-1"/>
+<wire x1="57.9755" y1="36.068" x2="29.549" y2="16.485" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="DIP3">
 <contactref element="ROTARY_DIP" pad="8"/>
 <contactref element="IC1" pad="26"/>
-<wire x1="52.6415" y1="37.084" x2="29.549" y2="18.085" width="0" layer="19" extent="1-1"/>
+<wire x1="52.8955" y1="36.068" x2="29.549" y2="18.085" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="DIP2">
 <contactref element="ROTARY_DIP" pad="4"/>
 <contactref element="IC1" pad="25"/>
-<wire x1="57.7215" y1="27.813" x2="29.549" y2="17.285" width="0" layer="19" extent="1-1"/>
+<wire x1="57.9755" y1="26.797" x2="29.549" y2="17.285" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="DIP0">
 <contactref element="ROTARY_DIP" pad="1"/>
 <contactref element="IC1" pad="23"/>
-<wire x1="52.6415" y1="27.813" x2="29.549" y2="15.685" width="0" layer="19" extent="1-1"/>
+<wire x1="52.8955" y1="26.797" x2="29.549" y2="15.685" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PWM0">
 <contactref element="IC1" pad="40"/>
 <contactref element="R12" pad="2"/>
 <wire x1="22.949" y1="25.485" x2="12.534" y2="20.828" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PWM1">
 <contactref element="IC1" pad="41"/>
 <contactref element="R13" pad="2"/>
 <wire x1="22.149" y1="25.485" x2="12.534" y2="18.288" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PWM2">
 <contactref element="IC1" pad="42"/>
 <contactref element="R14" pad="2"/>
 <wire x1="21.349" y1="25.485" x2="12.534" y2="15.748" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PWM3">
 <contactref element="IC1" pad="43"/>
 <contactref element="R15" pad="2"/>
 <wire x1="20.549" y1="25.485" x2="12.534" y2="13.208" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="ASSOCLED">
 <contactref element="U$1" pad="15"/>
 <contactref element="R8" pad="2"/>
 <wire x1="39.53" y1="7.185" x2="12.28" y2="7.112" width="0" layer="19" extent="1-16"/>
 </signal>
 <signal name="N$7">
 <contactref element="R8" pad="1"/>
 <contactref element="LED1" pad="A"/>
 <wire x1="8.116" y1="23.368" x2="10.58" y2="7.112" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$8">
 <contactref element="Q2" pad="B"/>
 <contactref element="R9" pad="2"/>
 <wire x1="34.202" y1="25.908" x2="33.848" y2="30.65" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$9">
 <contactref element="Q1" pad="3"/>
 <contactref element="R11" pad="2"/>
 <wire x1="23.628" y1="29.718" x2="30.988" y2="30.65" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$14">
 <contactref element="Q2" pad="C"/>
 <contactref element="R10" pad="1"/>
 <contactref element="Q1" pad="1"/>
 <wire x1="31.938" y1="32.75" x2="34.798" y2="32.85" width="0" layer="19" extent="1-1"/>
 <wire x1="27.432" y1="32.854" x2="31.938" y2="32.75" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="HEAT">
 <contactref element="R9" pad="1"/>
 <contactref element="IC1" pad="44"/>
 <wire x1="19.749" y1="25.485" x2="35.902" y2="25.908" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$1">
 <contactref element="R12" pad="1"/>
 <contactref element="LED2" pad="A"/>
 <wire x1="10.834" y1="20.828" x2="8.116" y2="20.828" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$15">
 <contactref element="R13" pad="1"/>
 <contactref element="LED3" pad="A"/>
 <wire x1="10.834" y1="18.288" x2="8.116" y2="18.288" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$16">
 <contactref element="R14" pad="1"/>
 <contactref element="LED4" pad="A"/>
 <wire x1="10.834" y1="15.748" x2="8.116" y2="15.748" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$17">
 <contactref element="R15" pad="1"/>
 <contactref element="LED5" pad="A"/>
 <wire x1="10.834" y1="13.208" x2="8.116" y2="13.208" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$18">
-<via x="5.334" y="43.434" extent="1-16" drill="3.2"/>
+<via x="3.81" y="35.56" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$19">
-<via x="57.912" y="43.942" extent="1-16" drill="3.2"/>
+<via x="59.69" y="35.56" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$20">
-<via x="2.794" y="2.794" extent="1-16" drill="3.2"/>
+<via x="3.81" y="3.81" extent="1-16" drill="3.2"/>
 </signal>
 <signal name="N$21">
-<via x="58.42" y="2.794" extent="1-16" drill="3.2"/>
+<via x="59.69" y="3.81" extent="1-16" drill="3.2"/>
 </signal>
 </signals>
 </board>
 </drawing>
 </eagle>

0 comments (0 inline, 0 general)