seniordesign-hardware Changeset - 20054f9d7f69

Changeset - 20054f9d7f69

Parent rev.

Child rev.

[Not reviewed]

default

0 3 0

ethanzonca@CL-SEC241-08.cedarville.edu - 13 years ago 2012-11-01 14:40:55
ethanzonca@CL-SEC241-08.cedarville.edu

Minor master changes (commentnig), added MAX thermocouple chip to daughter

3 files changed with 649 insertions and 5 deletions:

master/master.brd

slave-daughter/slave-daughter-sensors.brd

102

slave-daughter/slave-daughter-sensors.sch

545

0 comments (0 inline, 0 general)

master/master.brd

➞

Show inline comments

@@ @@ -11,13 +11,13 @@ @@
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="yes"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
@@ @@ -144,12 +144,13 @@ @@
 <wire x1="52.07" y1="44.45" x2="48.26" y2="48.26" width="0.4064" layer="21"/>
 <wire x1="48.26" y1="48.26" x2="43.18" y2="48.26" width="0.4064" layer="21"/>
 <wire x1="43.18" y1="48.26" x2="38.1" y2="43.18" width="0.4064" layer="21"/>
 <wire x1="38.1" y1="43.18" x2="35.56" y2="43.18" width="0.4064" layer="21"/>
 <circle x="24.4475" y="39.0525" radius="0.127" width="0.4064" layer="21"/>
 <text x="54.61" y="25.4" size="1.27" layer="21" font="vector" rot="R90">via to gnd plane below</text>
 <text x="10.16" y="59.69" size="1.778" layer="21">TODO: USE NICK"S THING</text>
 </plain>
 <libraries>
 <library name="SparkFun">
 <description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
 We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
 &lt;br&gt;&lt;br&gt;

slave-daughter/slave-daughter-sensors.brd

➞

Show inline comments

@@ @@ -62,18 +62,32 @@ @@
 <layer number="102" name="Vscore" color="7" fill="1" visible="no" active="yes"/>
 <layer number="103" name="tMap" color="7" fill="1" visible="no" active="yes"/>
 <layer number="104" name="Name" color="16" fill="1" visible="no" active="yes"/>
 <layer number="105" name="tPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="106" name="bPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="107" name="Crop" color="7" fill="1" visible="no" active="yes"/>
 <layer number="108" name="fp8" color="7" fill="1" visible="no" active="yes"/>
 <layer number="109" name="fp9" color="7" fill="1" visible="no" active="yes"/>
 <layer number="110" name="fp0" color="7" fill="1" visible="no" active="yes"/>
 <layer number="111" name="LPC17xx" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="112" name="tSilk" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="116" name="Patch_BOT" color="9" fill="4" visible="no" active="yes"/>
 <layer number="121" name="_tsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="122" name="_bsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="123" name="tTestmark" color="7" fill="1" visible="no" active="yes"/>
 <layer number="124" name="bTestmark" color="7" fill="1" visible="no" active="yes"/>
 <layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="126" name="_bNames" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="127" name="_tValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="128" name="_bValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="131" name="tAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="132" name="bAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
 <layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
 <layer number="152" name="_bDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
 <layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
 <layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
 <layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
 <layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
 <layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
@@ @@ -93,12 +107,14 @@ @@
 <layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
 <layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
 <layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
 <layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
 <layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
 <layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
 <layer number="248" name="Housing" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="249" name="Edge" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
 <layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
 <layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
 </layers>
 <board>
 <plain>
@@ @@ -241,12 +257,28 @@ We've spent an enormous amount of time c @@
 <smd name="6" x="2.065" y="0" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 <smd name="5" x="2.065" y="-1.27" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 <smd name="3" x="-2.065" y="-1.27" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 <smd name="2" x="-2.065" y="0" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 <smd name="1" x="-2.065" y="1.27" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 </package>
 <package name="0603-RES">
 <wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
 <wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
 <smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <text x="-0.889" y="0.762" size="0.4064" layer="25" font="vector">&gt;NAME</text>
 <text x="-1.016" y="-1.143" size="0.4064" layer="27" font="vector">&gt;VALUE</text>
 <rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
 <rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 <rectangle x1="-0.2286" y1="-0.381" x2="0.2286" y2="0.381" layer="21"/>
 </package>
 </packages>
 </library>
 <library name="SeniorDesign">
 <packages>
 <package name="SOIC8">
 <wire x1="2.4" y1="1.9" x2="2.4" y2="-1.4" width="0.2032" layer="51"/>
@@ @@ -288,19 +320,56 @@ We've spent an enormous amount of time c @@
 <smd name="4" x="1.89" y="0.35" dx="0.36" dy="0.48" layer="1" rot="R90"/>
 <smd name="P$7" x="1.02" y="1" dx="0.71" dy="1.4" layer="1"/>
 <text x="0" y="2.26" size="0.6096" layer="25">&gt;NAME</text>
 </package>
 </packages>
 </library>
 <library name="AlexW-Eagle-Libraries">
 <description>&lt;b&gt;Reference Package&lt;/b&gt;&lt;p&gt;</description>
 <packages>
 <package name="SOIC8">
 <description>&lt;b&gt;Small Outline IC&lt;/b&gt;</description>
 <wire x1="2.4" y1="1.9" x2="2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="2.4" y2="-1.9" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.9" x2="-2.4" y2="-1.9" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="-1.9" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="-1.4" x2="-2.4" y2="1.9" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="1.9" x2="2.4" y2="1.9" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/>
 <smd name="2" x="-0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="7" x="-0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="1" x="-1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="3" x="0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="4" x="1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="8" x="-1.905" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="6" x="0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="5" x="1.905" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <text x="-2.667" y="-1.905" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="3.937" y="-1.905" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-2.15" y1="-3.1" x2="-1.66" y2="-2" layer="51"/>
 <rectangle x1="-0.88" y1="-3.1" x2="-0.39" y2="-2" layer="51"/>
 <rectangle x1="0.39" y1="-3.1" x2="0.88" y2="-2" layer="51"/>
 <rectangle x1="1.66" y1="-3.1" x2="2.15" y2="-2" layer="51"/>
 <rectangle x1="1.66" y1="2" x2="2.15" y2="3.1" layer="51"/>
 <rectangle x1="0.39" y1="2" x2="0.88" y2="3.1" layer="51"/>
 <rectangle x1="-0.88" y1="2" x2="-0.39" y2="3.1" layer="51"/>
 <rectangle x1="-2.15" y1="2" x2="-1.66" y2="3.1" layer="51"/>
 </package>
 </packages>
 </library>
 </libraries>
 <attributes>
 </attributes>
 <variantdefs>
 </variantdefs>
 <classes>
 <class number="0" name="default" width="0" drill="0">
 <class number="0" name="default" width="0.254" drill="0">
 </class>
 <class number="1" name="power" width="0.508" drill="0">
 </class>
 <class number="2" name="gnd" width="0.381" drill="0">
 </class>
 </classes>
 <designrules name="default">
 <description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 &lt;p&gt;
 Die Standard-Design-Rules sind so gewählt, dass sie für
@@ @@ -482,53 +551,68 @@ design rules under a new name.</descript @@
 <element name="U$1" library="SeniorDesign" package="SOIC8" value="HIH6131-021-001" x="-17.78" y="3.81"/>
 <element name="U$2" library="SeniorDesign" package="MAX44009" value="MAX44009" x="-15.24" y="34.29"/>
 <element name="C1" library="SparkFun" package="0603-CAP" value="0.1uF" x="-17.78" y="35.56"/>
 <element name="C2" library="SparkFun" package="0603-CAP" value="0.22uF" x="-21.59" y="35.56"/>
 <element name="C3" library="SparkFun" package="0603-CAP" value="1uF" x="-25.4" y="35.56"/>
 <element name="U$3" library="SparkFun" package="BMP085" value="BMP085" x="-22.86" y="-5.08"/>
 <element name="IC2" library="AlexW-Eagle-Libraries" package="SOIC8" value="MAX31855" x="-21.59" y="-16.51"/>
 <element name="R4" library="SparkFun" package="0603-RES" value="10k" x="-21.59" y="-22.86"/>
 <element name="C9" library="SparkFun" package="0603-CAP" value="NOPOP" x="-25.4" y="-22.86"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="U$1" pad="2"/>
 <contactref element="C1" pad="2"/>
 <contactref element="C2" pad="2"/>
 <contactref element="U$2" pad="2"/>
 <contactref element="U$2" pad="3"/>
 <contactref element="C3" pad="2"/>
 <contactref element="JP1" pad="1"/>
 <contactref element="U$3" pad="1"/>
 <contactref element="IC2" pad="1"/>
 <contactref element="IC2" pad="1"/>
 <wire x1="-15.11" y1="35.29" x2="5.08" y2="36.957" width="0" layer="19" extent="1-1"/>
 <wire x1="-15.11" y1="34.63" x2="-15.11" y2="35.29" width="0" layer="19" extent="1-1"/>
 <wire x1="-16.93" y1="35.56" x2="-15.11" y2="35.29" width="0" layer="19" extent="1-1"/>
 <wire x1="-20.74" y1="35.56" x2="-16.93" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-24.55" y1="35.56" x2="-20.74" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-18.415" y1="1.21" x2="-15.11" y2="34.63" width="0" layer="19" extent="1-1"/>
 <wire x1="-24.925" y1="-3.81" x2="-18.415" y2="1.21" width="0" layer="19" extent="1-1"/>
 <wire x1="-23.495" y1="-19.11" x2="-24.925" y2="-3.81" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="VBAT">
 <contactref element="JP1" pad="2"/>
 </signal>
 <signal name="VCC">
 <contactref element="U$1" pad="8"/>
 <contactref element="C2" pad="1"/>
 <contactref element="U$2" pad="1"/>
 <contactref element="C3" pad="1"/>
 <contactref element="JP1" pad="3"/>
 <contactref element="IC2" pad="4"/>
 <contactref element="IC2" pad="4"/>
 <contactref element="R4" pad="2"/>
 <wire x1="-15.11" y1="35.95" x2="10.16" y2="36.957" width="0" layer="19" extent="1-1"/>
 <wire x1="-22.44" y1="35.56" x2="-15.11" y2="35.95" width="0" layer="19" extent="1-1"/>
 <wire x1="-26.25" y1="35.56" x2="-22.44" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="10.16" y1="36.957" x2="-26.25" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-19.685" y1="6.41" x2="10.16" y2="36.957" width="0" layer="19" extent="1-1"/>
 <wire x1="-19.685" y1="6.41" x2="-22.44" y2="35.56" width="0" layer="19" extent="1-1"/>
 <wire x1="-19.685" y1="-19.11" x2="-19.685" y2="6.41" width="0" layer="19" extent="1-1"/>
 <wire x1="-20.74" y1="-22.86" x2="-19.685" y2="-19.11" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="MOSI">
 <contactref element="JP1" pad="4"/>
 </signal>
 <signal name="MISO">
 <contactref element="JP1" pad="5"/>
 <contactref element="IC2" pad="7"/>
 <wire x1="-22.225" y1="-13.91" x2="15.24" y2="36.957" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="SCK">
 <contactref element="JP1" pad="6"/>
 <contactref element="IC2" pad="5"/>
 <wire x1="-19.685" y1="-13.91" x2="17.78" y2="36.703" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PD4">
 <contactref element="JP1" pad="7"/>
 </signal>
 <signal name="PD5">
 <contactref element="JP1" pad="8"/>
@@ @@ -585,10 +669,25 @@ design rules under a new name.</descript @@
 <signal name="VDDD">
 <contactref element="U$3" pad="4"/>
 </signal>
 <signal name="VDDA">
 <contactref element="U$3" pad="3"/>
 </signal>
 <signal name="T+">
 <contactref element="IC2" pad="3"/>
 <contactref element="C9" pad="2"/>
 <wire x1="-20.955" y1="-19.11" x2="-24.55" y2="-22.86" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="MAX-CS">
 <contactref element="IC2" pad="6"/>
 <contactref element="R4" pad="1"/>
 <wire x1="-20.955" y1="-13.91" x2="-22.44" y2="-22.86" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="T-">
 <contactref element="IC2" pad="2"/>
 <contactref element="C9" pad="1"/>
 <wire x1="-22.225" y1="-19.11" x2="-26.25" y2="-22.86" width="0" layer="19" extent="1-1"/>
 </signal>
 </signals>
 </board>
 </drawing>
 </eagle>

slave-daughter/slave-daughter-sensors.sch

➞

Show inline comments

@@ @@ -62,18 +62,32 @@ @@
 <layer number="102" name="Vscore" color="7" fill="1" visible="no" active="yes"/>
 <layer number="103" name="tMap" color="7" fill="1" visible="no" active="yes"/>
 <layer number="104" name="Name" color="16" fill="1" visible="no" active="yes"/>
 <layer number="105" name="tPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="106" name="bPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="107" name="Crop" color="7" fill="1" visible="no" active="yes"/>
 <layer number="108" name="fp8" color="7" fill="1" visible="no" active="yes"/>
 <layer number="109" name="fp9" color="7" fill="1" visible="no" active="yes"/>
 <layer number="110" name="fp0" color="7" fill="1" visible="no" active="yes"/>
 <layer number="111" name="LPC17xx" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="112" name="tSilk" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="116" name="Patch_BOT" color="9" fill="4" visible="no" active="yes"/>
 <layer number="121" name="_tsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="122" name="_bsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="123" name="tTestmark" color="7" fill="1" visible="no" active="yes"/>
 <layer number="124" name="bTestmark" color="7" fill="1" visible="no" active="yes"/>
 <layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="126" name="_bNames" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="127" name="_tValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="128" name="_bValues" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="131" name="tAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="132" name="bAdjust" color="7" fill="1" visible="no" active="yes"/>
 <layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
 <layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
 <layer number="152" name="_bDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="199" name="Contour" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
 <layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
 <layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
 <layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
 <layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
 <layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
@@ @@ -93,12 +107,14 @@ @@
 <layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
 <layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
 <layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
 <layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
 <layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
 <layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
 <layer number="248" name="Housing" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="249" name="Edge" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
 <layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
 <layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
 </layers>
 <schematic xreflabel="%F%N/%S.%C%R" xrefpart="/%S.%C%R">
 <libraries>
@@ @@ -592,12 +608,195 @@ Commonly used for small ceramic capacito @@
 <smd name="6" x="2.065" y="0" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 <smd name="5" x="2.065" y="-1.27" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 <smd name="3" x="-2.065" y="-1.27" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 <smd name="2" x="-2.065" y="0" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 <smd name="1" x="-2.065" y="1.27" dx="0.8" dy="1.67" layer="1" rot="R270"/>
 </package>
 <package name="AXIAL-0.3">
 <wire x1="-2.54" y1="0.762" x2="2.54" y2="0.762" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="0.762" x2="2.54" y2="0" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="0" x2="2.54" y2="-0.762" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="-0.762" x2="-2.54" y2="-0.762" width="0.2032" layer="21"/>
 <wire x1="-2.54" y1="-0.762" x2="-2.54" y2="0" width="0.2032" layer="21"/>
 <wire x1="-2.54" y1="0" x2="-2.54" y2="0.762" width="0.2032" layer="21"/>
 <wire x1="2.54" y1="0" x2="2.794" y2="0" width="0.2032" layer="21"/>
 <wire x1="-2.54" y1="0" x2="-2.794" y2="0" width="0.2032" layer="21"/>
 <pad name="P$1" x="-3.81" y="0" drill="0.9" diameter="1.8796"/>
 <pad name="P$2" x="3.81" y="0" drill="0.9" diameter="1.8796"/>
 <text x="-2.54" y="1.27" size="0.4064" layer="25" font="vector">&gt;Name</text>
 <text x="-2.032" y="-0.381" size="1.016" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="R2010">
 <description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
 chip</description>
 <wire x1="-1.662" y1="1.245" x2="1.662" y2="1.245" width="0.1524" layer="51"/>
 <wire x1="-1.637" y1="-1.245" x2="1.687" y2="-1.245" width="0.1524" layer="51"/>
 <wire x1="-3.473" y1="1.483" x2="3.473" y2="1.483" width="0.0508" layer="39"/>
 <wire x1="3.473" y1="1.483" x2="3.473" y2="-1.483" width="0.0508" layer="39"/>
 <wire x1="3.473" y1="-1.483" x2="-3.473" y2="-1.483" width="0.0508" layer="39"/>
 <wire x1="-3.473" y1="-1.483" x2="-3.473" y2="1.483" width="0.0508" layer="39"/>
 <wire x1="-1.027" y1="1.245" x2="1.027" y2="1.245" width="0.1524" layer="21"/>
 <wire x1="-1.002" y1="-1.245" x2="1.016" y2="-1.245" width="0.1524" layer="21"/>
 <smd name="1" x="-2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
 <smd name="2" x="2.2" y="0" dx="1.8" dy="2.7" layer="1"/>
 <text x="-2.54" y="1.5875" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-2.54" y="-2.032" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-2.4892" y1="-1.3208" x2="-1.6393" y2="1.3292" layer="51"/>
 <rectangle x1="1.651" y1="-1.3208" x2="2.5009" y2="1.3292" layer="51"/>
 </package>
 <package name="0603-RES">
 <wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
 <wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
 <smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <text x="-0.889" y="0.762" size="0.4064" layer="25" font="vector">&gt;NAME</text>
 <text x="-1.016" y="-1.143" size="0.4064" layer="27" font="vector">&gt;VALUE</text>
 <rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
 <rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 <rectangle x1="-0.2286" y1="-0.381" x2="0.2286" y2="0.381" layer="21"/>
 </package>
 <package name="0402-RES">
 <description>&lt;b&gt;CAPACITOR&lt;/b&gt;&lt;p&gt;
 chip</description>
 <wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/>
 <wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/>
 <wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/>
 <wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/>
 <smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
 <smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
 <text x="-0.889" y="0.6985" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.0795" y="-1.143" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/>
 <rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 <rectangle x1="-0.2032" y1="-0.3556" x2="0.2032" y2="0.3556" layer="21"/>
 </package>
 <package name="1/6W-RES">
 <description>1/6W Thru-hole Resistor - *UNPROVEN*</description>
 <wire x1="-1.55" y1="0.85" x2="-1.55" y2="-0.85" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-0.85" x2="1.55" y2="-0.85" width="0.2032" layer="21"/>
 <wire x1="1.55" y1="-0.85" x2="1.55" y2="0.85" width="0.2032" layer="21"/>
 <wire x1="1.55" y1="0.85" x2="-1.55" y2="0.85" width="0.2032" layer="21"/>
 <pad name="1" x="-2.5" y="0" drill="0.762"/>
 <pad name="2" x="2.5" y="0" drill="0.762"/>
 <text x="-1.2662" y="0.9552" size="0.6096" layer="25">&gt;NAME</text>
 <text x="-1.423" y="-0.4286" size="0.8128" layer="21" ratio="15">&gt;VALUE</text>
 </package>
 <package name="R2512">
 <wire x1="-2.362" y1="1.473" x2="2.387" y2="1.473" width="0.1524" layer="51"/>
 <wire x1="-2.362" y1="-1.473" x2="2.387" y2="-1.473" width="0.1524" layer="51"/>
 <smd name="1" x="-2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
 <smd name="2" x="2.8" y="0" dx="1.8" dy="3.2" layer="1"/>
 <text x="-2.54" y="1.905" size="1.27" layer="25">&gt;NAME</text>
 <text x="-2.54" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
 <rectangle x1="-3.2004" y1="-1.5494" x2="-2.3505" y2="1.5507" layer="51"/>
 <rectangle x1="2.3622" y1="-1.5494" x2="3.2121" y2="1.5507" layer="51"/>
 </package>
 <package name="AXIAL-0.4">
 <description>1/4W Resistor, 0.4" wide&lt;p&gt;
 Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
 <wire x1="-3.15" y1="-1.2" x2="-3.15" y2="1.2" width="0.2032" layer="21"/>
 <wire x1="-3.15" y1="1.2" x2="3.15" y2="1.2" width="0.2032" layer="21"/>
 <wire x1="3.15" y1="1.2" x2="3.15" y2="-1.2" width="0.2032" layer="21"/>
 <wire x1="3.15" y1="-1.2" x2="-3.15" y2="-1.2" width="0.2032" layer="21"/>
 <pad name="P$1" x="-5.08" y="0" drill="0.9" diameter="1.8796"/>
 <pad name="P$2" x="5.08" y="0" drill="0.9" diameter="1.8796"/>
 <text x="-3.175" y="1.905" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
 <text x="-2.286" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="AXIAL-0.5">
 <description>1/2W Resistor, 0.5" wide&lt;p&gt;
 Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
 <wire x1="-4.5" y1="-1.65" x2="-4.5" y2="1.65" width="0.2032" layer="21"/>
 <wire x1="-4.5" y1="1.65" x2="4.5" y2="1.65" width="0.2032" layer="21"/>
 <wire x1="4.5" y1="1.65" x2="4.5" y2="-1.65" width="0.2032" layer="21"/>
 <wire x1="4.5" y1="-1.65" x2="-4.5" y2="-1.65" width="0.2032" layer="21"/>
 <pad name="P$1" x="-6.35" y="0" drill="0.9" diameter="1.8796"/>
 <pad name="P$2" x="6.35" y="0" drill="0.9" diameter="1.8796"/>
 <text x="-4.445" y="2.54" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
 <text x="-3.429" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="AXIAL-0.6">
 <description>1W Resistor, 0.6" wide&lt;p&gt;
 Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
 <wire x1="-5.75" y1="-2.25" x2="-5.75" y2="2.25" width="0.2032" layer="21"/>
 <wire x1="-5.75" y1="2.25" x2="5.75" y2="2.25" width="0.2032" layer="21"/>
 <wire x1="5.75" y1="2.25" x2="5.75" y2="-2.25" width="0.2032" layer="21"/>
 <wire x1="5.75" y1="-2.25" x2="-5.75" y2="-2.25" width="0.2032" layer="21"/>
 <pad name="P$1" x="-7.62" y="0" drill="1.2" diameter="1.8796"/>
 <pad name="P$2" x="7.62" y="0" drill="1.2" diameter="1.8796"/>
 <text x="-5.715" y="3.175" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
 <text x="-4.064" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="AXIAL-0.8">
 <description>2W Resistor, 0.8" wide&lt;p&gt;
 Yageo CFR series &lt;a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf"&gt;http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf&lt;/a&gt;</description>
 <wire x1="-7.75" y1="-2.5" x2="-7.75" y2="2.5" width="0.2032" layer="21"/>
 <wire x1="-7.75" y1="2.5" x2="7.75" y2="2.5" width="0.2032" layer="21"/>
 <wire x1="7.75" y1="2.5" x2="7.75" y2="-2.5" width="0.2032" layer="21"/>
 <wire x1="7.75" y1="-2.5" x2="-7.75" y2="-2.5" width="0.2032" layer="21"/>
 <pad name="P$1" x="-10.16" y="0" drill="1.2" diameter="1.8796"/>
 <pad name="P$2" x="10.16" y="0" drill="1.2" diameter="1.8796"/>
 <text x="-7.62" y="3.175" size="0.8128" layer="25" font="vector" ratio="15">&gt;Name</text>
 <text x="-5.969" y="-0.381" size="0.8128" layer="21" font="vector" ratio="15">&gt;Value</text>
 </package>
 <package name="AXIAL-0.3-KIT">
 <description>&lt;h3&gt;AXIAL-0.3-KIT&lt;/h3&gt;
 Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.&lt;br&gt;
 &lt;br&gt;
 &lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>
 <wire x1="-2.54" y1="1.27" x2="2.54" y2="1.27" width="0.254" layer="21"/>
 <wire x1="2.54" y1="1.27" x2="2.54" y2="0" width="0.254" layer="21"/>
 <wire x1="2.54" y1="0" x2="2.54" y2="-1.27" width="0.254" layer="21"/>
 <wire x1="2.54" y1="-1.27" x2="-2.54" y2="-1.27" width="0.254" layer="21"/>
 <wire x1="-2.54" y1="-1.27" x2="-2.54" y2="0" width="0.254" layer="21"/>
 <wire x1="-2.54" y1="0" x2="-2.54" y2="1.27" width="0.254" layer="21"/>
 <wire x1="2.54" y1="0" x2="2.794" y2="0" width="0.254" layer="21"/>
 <wire x1="-2.54" y1="0" x2="-2.794" y2="0" width="0.254" layer="21"/>
 <pad name="P$1" x="-3.81" y="0" drill="1.016" diameter="2.032" stop="no"/>
 <pad name="P$2" x="3.81" y="0" drill="1.016" diameter="2.032" stop="no"/>
 <text x="-2.54" y="1.27" size="0.4064" layer="25" font="vector">&gt;Name</text>
 <text x="-2.159" y="-0.762" size="1.27" layer="21" font="vector" ratio="15">&gt;Value</text>
 <polygon width="0.127" layer="30">
 <vertex x="3.8201" y="-0.9449" curve="-90"/>
 <vertex x="2.8652" y="-0.0152" curve="-90.011749"/>
 <vertex x="3.8176" y="0.9602" curve="-90"/>
 <vertex x="4.7676" y="-0.0178" curve="-90.024193"/>
 </polygon>
 <polygon width="0.127" layer="29">
 <vertex x="3.8176" y="-0.4369" curve="-90.012891"/>
 <vertex x="3.3731" y="-0.0127" curve="-90"/>
 <vertex x="3.8176" y="0.4546" curve="-90"/>
 <vertex x="4.2595" y="-0.0025" curve="-90.012967"/>
 </polygon>
 <polygon width="0.127" layer="30">
 <vertex x="-3.8075" y="-0.9525" curve="-90"/>
 <vertex x="-4.7624" y="-0.0228" curve="-90.011749"/>
 <vertex x="-3.81" y="0.9526" curve="-90"/>
 <vertex x="-2.86" y="-0.0254" curve="-90.024193"/>
 </polygon>
 <polygon width="0.127" layer="29">
 <vertex x="-3.81" y="-0.4445" curve="-90.012891"/>
 <vertex x="-4.2545" y="-0.0203" curve="-90"/>
 <vertex x="-3.81" y="0.447" curve="-90"/>
 <vertex x="-3.3681" y="-0.0101" curve="-90.012967"/>
 </polygon>
 </package>
 </packages>
 <symbols>
 <symbol name="LETTER_L">
 <wire x1="0" y1="185.42" x2="248.92" y2="185.42" width="0.4064" layer="94"/>
 <wire x1="248.92" y1="185.42" x2="248.92" y2="0" width="0.4064" layer="94"/>
 <wire x1="0" y1="185.42" x2="0" y2="0" width="0.4064" layer="94"/>
@@ @@ -694,12 +893,27 @@ Commonly used for small ceramic capacito @@
 <pin name="NC" x="-10.16" y="-2.54" length="short"/>
 <pin name="VDDD" x="-10.16" y="0" length="short" direction="pwr"/>
 <pin name="VDDA" x="-10.16" y="2.54" length="short" direction="pwr"/>
 <pin name="EOC" x="12.7" y="-2.54" length="short" direction="out" rot="R180"/>
 <pin name="GND" x="-10.16" y="-5.08" length="short" direction="pwr"/>
 </symbol>
 <symbol name="RESISTOR">
 <wire x1="-2.54" y1="0" x2="-2.159" y2="1.016" width="0.1524" layer="94"/>
 <wire x1="-2.159" y1="1.016" x2="-1.524" y2="-1.016" width="0.1524" layer="94"/>
 <wire x1="-1.524" y1="-1.016" x2="-0.889" y2="1.016" width="0.1524" layer="94"/>
 <wire x1="-0.889" y1="1.016" x2="-0.254" y2="-1.016" width="0.1524" layer="94"/>
 <wire x1="-0.254" y1="-1.016" x2="0.381" y2="1.016" width="0.1524" layer="94"/>
 <wire x1="0.381" y1="1.016" x2="1.016" y2="-1.016" width="0.1524" layer="94"/>
 <wire x1="1.016" y1="-1.016" x2="1.651" y2="1.016" width="0.1524" layer="94"/>
 <wire x1="1.651" y1="1.016" x2="2.286" y2="-1.016" width="0.1524" layer="94"/>
 <wire x1="2.286" y1="-1.016" x2="2.54" y2="0" width="0.1524" layer="94"/>
 <text x="-3.81" y="1.4986" size="1.778" layer="95">&gt;NAME</text>
 <text x="-3.81" y="-3.302" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="FRAME-LETTER" prefix="FRAME">
 <description>&lt;b&gt;Schematic Frame&lt;/b&gt;&lt;p&gt;
 Standard 8.5x11 US Letter frame</description>
 <gates>
@@ @@ -980,12 +1194,138 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="RESISTOR" prefix="R" uservalue="yes">
 <description>&lt;b&gt;Resistor&lt;/b&gt;
 Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</description>
 <gates>
 <gate name="G$1" symbol="RESISTOR" x="0" y="0"/>
 </gates>
 <devices>
 <device name="1206" package="1206">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="AXIAL-0.3" package="AXIAL-0.3">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="2010" package="R2010">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0805-RES" package="0805">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0603-RES" package="0603-RES">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0402-RES" package="0402-RES">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-1/6W" package="1/6W-RES">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="2512" package="R2512">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-1/4W" package="AXIAL-0.4">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-1/2W" package="AXIAL-0.5">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-1W" package="AXIAL-0.6">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH-2W" package="AXIAL-0.8">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="KIT" package="AXIAL-0.3-KIT">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="SeniorDesign">
 <packages>
 <package name="SOIC8">
 <wire x1="2.4" y1="1.9" x2="2.4" y2="-1.4" width="0.2032" layer="51"/>
@@ @@ -1105,19 +1445,152 @@ i2c</description> @@
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="supply2">
 <packages>
 </packages>
 <symbols>
 <symbol name="GND">
 <wire x1="-1.27" y1="0" x2="1.27" y2="0" width="0.254" layer="94"/>
 <wire x1="1.27" y1="0" x2="0" y2="-1.27" width="0.254" layer="94"/>
 <wire x1="0" y1="-1.27" x2="-1.27" y2="0" width="0.254" layer="94"/>
 <text x="-1.905" y="-3.175" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="GND" x="0" y="2.54" visible="off" length="short" direction="sup" rot="R270"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="GND" prefix="SUPPLY">
 <description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
 <gates>
 <gate name="GND" symbol="GND" x="0" y="0"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="supply1">
 <packages>
 </packages>
 <symbols>
 <symbol name="VCC">
 <wire x1="1.27" y1="-1.905" x2="0" y2="0" width="0.254" layer="94"/>
 <wire x1="0" y1="0" x2="-1.27" y2="-1.905" width="0.254" layer="94"/>
 <text x="-2.54" y="-2.54" size="1.778" layer="96" rot="R90">&gt;VALUE</text>
 <pin name="VCC" x="0" y="-2.54" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="VCC" prefix="P+">
 <description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
 <gates>
 <gate name="VCC" symbol="VCC" x="0" y="0"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="AlexW-Eagle-Libraries">
 <description>&lt;b&gt;Reference Package&lt;/b&gt;&lt;p&gt;</description>
 <packages>
 <package name="SOIC8">
 <description>&lt;b&gt;Small Outline IC&lt;/b&gt;</description>
 <wire x1="2.4" y1="1.9" x2="2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="2.4" y2="-1.9" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.9" x2="-2.4" y2="-1.9" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="-1.9" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="-1.4" x2="-2.4" y2="1.9" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="1.9" x2="2.4" y2="1.9" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/>
 <smd name="2" x="-0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="7" x="-0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="1" x="-1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="3" x="0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="4" x="1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="8" x="-1.905" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="6" x="0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="5" x="1.905" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <text x="-2.667" y="-1.905" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="3.937" y="-1.905" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-2.15" y1="-3.1" x2="-1.66" y2="-2" layer="51"/>
 <rectangle x1="-0.88" y1="-3.1" x2="-0.39" y2="-2" layer="51"/>
 <rectangle x1="0.39" y1="-3.1" x2="0.88" y2="-2" layer="51"/>
 <rectangle x1="1.66" y1="-3.1" x2="2.15" y2="-2" layer="51"/>
 <rectangle x1="1.66" y1="2" x2="2.15" y2="3.1" layer="51"/>
 <rectangle x1="0.39" y1="2" x2="0.88" y2="3.1" layer="51"/>
 <rectangle x1="-0.88" y1="2" x2="-0.39" y2="3.1" layer="51"/>
 <rectangle x1="-2.15" y1="2" x2="-1.66" y2="3.1" layer="51"/>
 </package>
 </packages>
 <symbols>
 <symbol name="MAX31855">
 <wire x1="-10.16" y1="12.7" x2="-10.16" y2="-12.7" width="0.254" layer="94"/>
 <wire x1="-10.16" y1="-12.7" x2="10.16" y2="-12.7" width="0.254" layer="94"/>
 <wire x1="10.16" y1="-12.7" x2="10.16" y2="12.7" width="0.254" layer="94"/>
 <wire x1="10.16" y1="12.7" x2="-10.16" y2="12.7" width="0.254" layer="94"/>
 <text x="-10.16" y="15.24" size="1.27" layer="95">&gt;NAME</text>
 <text x="-10.16" y="12.7" size="1.27" layer="96">&gt;VALUE</text>
 <text x="-5.08" y="2.54" size="1.778" layer="94">MAX31855</text>
 <pin name="SO" x="12.7" y="-5.08" length="short" direction="out" rot="R180"/>
 <pin name="SCK" x="12.7" y="-7.62" length="short" direction="in" rot="R180"/>
 <pin name="CS" x="12.7" y="-10.16" length="short" direction="in" rot="R180"/>
 <pin name="T-" x="-12.7" y="-10.16" length="short" direction="in"/>
 <pin name="T+" x="-12.7" y="-5.08" length="short" direction="in"/>
 <pin name="VCC" x="-12.7" y="10.16" length="short" direction="pwr"/>
 <pin name="GND" x="-12.7" y="0" length="short" direction="pwr"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="MAX31855" prefix="IC">
 <gates>
 <gate name="G$1" symbol="MAX31855" x="0" y="0"/>
 </gates>
 <devices>
 <device name="" package="SOIC8">
 <connects>
 <connect gate="G$1" pin="CS" pad="6"/>
 <connect gate="G$1" pin="GND" pad="1"/>
 <connect gate="G$1" pin="SCK" pad="5"/>
 <connect gate="G$1" pin="SO" pad="7"/>
 <connect gate="G$1" pin="T+" pad="3"/>
 <connect gate="G$1" pin="T-" pad="2"/>
 <connect gate="G$1" pin="VCC" pad="4"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 </libraries>
 <attributes>
 </attributes>
 <variantdefs>
 </variantdefs>
 <classes>
 <class number="0" name="default" width="0" drill="0">
 <class number="0" name="default" width="0.254" drill="0">
 </class>
 <class number="1" name="power" width="0.508" drill="0">
 </class>
 <class number="2" name="gnd" width="0.381" drill="0">
 </class>
 </classes>
 <parts>
 <part name="FRAME1" library="SparkFun" deviceset="FRAME-LETTER" device=""/>
 <part name="JP1" library="SparkFun" deviceset="M10" device="LOCK"/>
 <part name="JP2" library="SparkFun" deviceset="M10" device="LOCK"/>
@@ @@ -1130,12 +1603,18 @@ i2c</description> @@
 <part name="GND2" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND3" library="SparkFun" deviceset="GND" device=""/>
 <part name="P+4" library="SparkFun" deviceset="VCC" device=""/>
 <part name="P+5" library="SparkFun" deviceset="VCC" device=""/>
 <part name="P+6" library="SparkFun" deviceset="VCC" device=""/>
 <part name="U$3" library="SparkFun" deviceset="BMP085" device=""/>
 <part name="IC2" library="AlexW-Eagle-Libraries" deviceset="MAX31855" device=""/>
 <part name="SUPPLY1" library="supply2" deviceset="GND" device=""/>
 <part name="P+7" library="supply1" deviceset="VCC" device=""/>
 <part name="R4" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="10k"/>
 <part name="P+3" library="supply1" deviceset="VCC" device=""/>
 <part name="C9" library="SparkFun" deviceset="CAP" device="0603-CAP" value="NOPOP"/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <text x="157.734" y="26.416" size="5.08" layer="94" font="vector">Slave Daughterboard</text>
 <wire x1="60.96" y1="185.42" x2="60.96" y2="119.38" width="0.4064" layer="94"/>
@@ @@ -1166,12 +1645,18 @@ i2c</description> @@
 <instance part="GND2" gate="1" x="83.82" y="132.08"/>
 <instance part="GND3" gate="1" x="144.78" y="139.7"/>
 <instance part="P+4" gate="1" x="38.1" y="149.86"/>
 <instance part="P+5" gate="1" x="83.82" y="162.56"/>
 <instance part="P+6" gate="1" x="144.78" y="162.56"/>
 <instance part="U$3" gate="G$1" x="91.44" y="96.52"/>
 <instance part="IC2" gate="G$1" x="200.66" y="81.28"/>
 <instance part="SUPPLY1" gate="GND" x="170.18" y="78.74"/>
 <instance part="P+7" gate="VCC" x="170.18" y="99.06"/>
 <instance part="R4" gate="G$1" x="228.6" y="88.9" rot="R90"/>
 <instance part="P+3" gate="VCC" x="228.6" y="99.06"/>
 <instance part="C9" gate="G$1" x="193.04" y="60.96" rot="R270"/>
 </instances>
 <busses>
 </busses>
 <nets>
 <net name="GND" class="0">
 <segment>
@@ @@ -1209,12 +1694,17 @@ i2c</description> @@
 <pinref part="GND1" gate="1" pin="GND"/>
 <wire x1="38.1" y1="139.7" x2="38.1" y2="142.24" width="0.1524" layer="91"/>
 <pinref part="JP1" gate="G$1" pin="1"/>
 <wire x1="22.86" y1="142.24" x2="38.1" y2="142.24" width="0.1524" layer="91"/>
 <label x="27.94" y="142.24" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="SUPPLY1" gate="GND" pin="GND"/>
 <pinref part="IC2" gate="G$1" pin="GND"/>
 <wire x1="187.96" y1="81.28" x2="170.18" y2="81.28" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="VBAT" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="2"/>
 <wire x1="22.86" y1="144.78" x2="33.02" y2="144.78" width="0.1524" layer="91"/>
 <label x="27.94" y="144.78" size="1.778" layer="95"/>
@@ @@ -1247,12 +1737,23 @@ i2c</description> @@
 <pinref part="P+4" gate="1" pin="VCC"/>
 <wire x1="38.1" y1="149.86" x2="38.1" y2="147.32" width="0.1524" layer="91"/>
 <pinref part="JP1" gate="G$1" pin="3"/>
 <wire x1="22.86" y1="147.32" x2="38.1" y2="147.32" width="0.1524" layer="91"/>
 <label x="27.94" y="147.32" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="IC2" gate="G$1" pin="VCC"/>
 <wire x1="170.18" y1="91.44" x2="187.96" y2="91.44" width="0.1524" layer="91"/>
 <pinref part="P+7" gate="VCC" pin="VCC"/>
 <wire x1="170.18" y1="91.44" x2="170.18" y2="96.52" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="R4" gate="G$1" pin="2"/>
 <wire x1="228.6" y1="93.98" x2="228.6" y2="96.52" width="0.1524" layer="91"/>
 <pinref part="P+3" gate="VCC" pin="VCC"/>
 </segment>
 </net>
 <net name="MOSI" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="4"/>
 <wire x1="22.86" y1="149.86" x2="33.02" y2="149.86" width="0.1524" layer="91"/>
 <label x="27.94" y="149.86" size="1.778" layer="95"/>
@@ @@ -1261,19 +1762,29 @@ i2c</description> @@
 <net name="MISO" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="5"/>
 <wire x1="22.86" y1="152.4" x2="33.02" y2="152.4" width="0.1524" layer="91"/>
 <label x="27.94" y="152.4" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="IC2" gate="G$1" pin="SO"/>
 <wire x1="213.36" y1="76.2" x2="220.98" y2="76.2" width="0.1524" layer="91"/>
 <label x="215.9" y="76.2" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="SCK" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="6"/>
 <wire x1="22.86" y1="154.94" x2="33.02" y2="154.94" width="0.1524" layer="91"/>
 <label x="27.94" y="154.94" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="IC2" gate="G$1" pin="SCK"/>
 <wire x1="213.36" y1="73.66" x2="220.98" y2="73.66" width="0.1524" layer="91"/>
 <label x="215.9" y="73.66" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PD4" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="7"/>
 <wire x1="22.86" y1="157.48" x2="33.02" y2="157.48" width="0.1524" layer="91"/>
 <label x="27.94" y="157.48" size="1.778" layer="95"/>
@@ @@ -1395,12 +1906,45 @@ i2c</description> @@
 <pinref part="U$1" gate="G$1" pin="VCORE"/>
 <wire x1="88.9" y1="152.4" x2="76.2" y2="152.4" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="1"/>
 <wire x1="76.2" y1="152.4" x2="76.2" y2="147.32" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="T+" class="0">
 <segment>
 <pinref part="IC2" gate="G$1" pin="T+"/>
 <wire x1="187.96" y1="76.2" x2="180.34" y2="76.2" width="0.1524" layer="91"/>
 <label x="180.34" y="76.2" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="C9" gate="G$1" pin="2"/>
 <wire x1="190.5" y1="60.96" x2="182.88" y2="60.96" width="0.1524" layer="91"/>
 <label x="182.88" y="60.96" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="MAX-CS" class="0">
 <segment>
 <pinref part="IC2" gate="G$1" pin="CS"/>
 <label x="215.9" y="71.12" size="1.778" layer="95"/>
 <pinref part="R4" gate="G$1" pin="1"/>
 <wire x1="213.36" y1="71.12" x2="228.6" y2="71.12" width="0.1524" layer="91"/>
 <wire x1="228.6" y1="71.12" x2="228.6" y2="83.82" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="T-" class="0">
 <segment>
 <pinref part="IC2" gate="G$1" pin="T-"/>
 <wire x1="187.96" y1="71.12" x2="180.34" y2="71.12" width="0.1524" layer="91"/>
 <label x="180.34" y="71.12" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="C9" gate="G$1" pin="1"/>
 <wire x1="198.12" y1="60.96" x2="205.74" y2="60.96" width="0.1524" layer="91"/>
 <label x="203.2" y="60.96" size="1.778" layer="95"/>
 </segment>
 </net>
 </nets>
 </sheet>
 </sheets>
 </schematic>
 </drawing>
 </eagle>

0 comments (0 inline, 0 general)