Changeset - 29cc8f11c022
Parent rev.
Child rev.
[Not reviewed]
default
0 1 0
Ethan Zonca - 13 years ago 2012-11-03 17:40:02
ez@ethanzonca.com
Connectors completly on board
1 file changed with 5 insertions and 31 deletions:
master/master.brd
5
31
0 comments (0 inline, 0 general)
master/master.brd
➞
Show inline comments
 
@@ -10451,50 +10451,50 @@ Please make sure your boards conform to
 
</element>
 
<element name="Y2" library="SparkFun" package="CRYSTAL-SMD-5X3" value="11.0592MHz" x="41.91" y="6.985" rot="R180"/>
 
<element name="C7" library="SparkFun" package="0603-CAP" value=".1uF" x="15.24" y="7.3025" rot="R180"/>
 
<element name="C8" library="SparkFun" package="0603-CAP" value="8.2pF" x="10.16" y="29.21" rot="R90"/>
 
<element name="C9" library="SparkFun" package="0603-CAP" value="1uF" x="12.22375" y="29.21" rot="R90"/>
 
<element name="C13" library="SparkFun" package="0603-CAP" value=".1uF" x="38.1" y="49.2125" rot="R180"/>
 
<element name="C14" library="SparkFun" package="0603-CAP" value=".1uF" x="40.64" y="25.4" rot="R180"/>
 
<element name="C15" library="SparkFun" package="0603-CAP" value=".1uF" x="34.925" y="6.50875"/>
 
<element name="C17" library="SparkFun" package="0603-CAP" value="10uF" x="27.94" y="17.62125" rot="R270"/>
 
<element name="ICSP" library="SparkFun" package="2X3-NS" value="AVR_SPI_PRG_6NS" x="31.75" y="2.8575"/>
 
<element name="M2" library="trackuino" package="HX1" value="HX1" x="13.97" y="41.91" rot="MR180"/>
 
<element name="C3" library="SparkFun" package="0603-CAP" value=".1uF" x="36.83" y="25.4" rot="R180"/>
 
<element name="IC2" library="74xx-little-us" package="SOT23-5" value="ON M74VHC1GT125DT1G" x="34.29" y="45.72"/>
 
<element name="TX" library="adafruit" package="CHIPLED_0603" value="GREEN" x="43.815" y="50.8"/>
 
<element name="STAT" library="adafruit" package="CHIPLED_0603" value="BLUE" x="15.24" y="1.27" rot="R90"/>
 
<element name="ERROR" library="adafruit" package="CHIPLED_0603" value="RED" x="11.43" y="1.27" rot="R90"/>
 
<element name="POWER" library="adafruit" package="CHIPLED_0603" value="WHITE" x="22.86" y="1.27" rot="R90"/>
 
<element name="R10" library="SparkFun" package="0603-RES" value="4.7k" x="49.05375" y="16.51" rot="R180"/>
 
<element name="R11" library="SparkFun" package="0603-RES" value="4.7k" x="49.05375" y="21.59"/>
 
<element name="Q5" library="transistor-npn" package="SOT23-BEC" value="NPN" x="30.48" y="44.45"/>
 
<element name="R18" library="SparkFun" package="0603-RES" value="10k" x="46.0375" y="50.8" rot="R270"/>
 
<element name="R19" library="SparkFun" package="0603-RES" value="10k" x="15.24" y="2.54"/>
 
<element name="R20" library="SparkFun" package="0603-RES" value="10k" x="11.43" y="2.54"/>
 
<element name="R21" library="SparkFun" package="0603-RES" value="10k" x="22.86" y="2.54"/>
 
<element name="BATT" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="22.86" y="48.895"/>
 
<element name="BUZZ" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="29.21" y="48.895"/>
 
<element name="BATT" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="22.86" y="48.5775"/>
 
<element name="BUZZ" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="29.21" y="48.5775"/>
 
<element name="R22" library="SparkFun" package="0603-RES" value="10k" x="26.67" y="44.45" rot="R90"/>
 
<element name="Q6" library="transistor-small-signal" package="SOT23" value="BSH202" x="22.86" y="44.45"/>
 
<element name="TEMP" library="SeniorDesign" package="SOT23-5" value="MCP9800" x="49.05375" y="19.05" rot="R270"/>
 
<element name="5V_SWITCHING" library="SeniorDesign" package="SOIC8HEAT" value="IFX91041EJ V50" x="44.45" y="34.29" rot="R90"/>
 
<element name="C12" library="SparkFun" package="0805" value="100uF" x="44.45" y="30.48"/>
 
<element name="C10" library="SparkFun" package="0603-CAP" value="22nF" x="50.8" y="33.655"/>
 
<element name="R2" library="SparkFun" package="0603-RES" value="22k" x="50.8" y="31.115"/>
 
<element name="C16" library="SparkFun" package="0603-CAP" value="220nF" x="38.89375" y="36.195" rot="R180"/>
 
<element name="D1" library="SparkFun" package="SMA-DIODE" value="DIODE-SCHOTTKY" x="38.1" y="38.735" rot="R180"/>
 
<element name="L3" library="SparkFun" package="SRU1038" value="47uH" x="45.72" y="42.545"/>
 
<element name="C18" library="SparkFun" package="0805" value="100uF" x="50.8" y="38.1"/>
 
<element name="C19" library="SparkFun" package="0603-CAP" value="220nF" x="50.8" y="36.195"/>
 
<element name="3.3V_LDO_REG" library="SeniorDesign" package="SOIC8" value="TPS76833QD" x="26.9875" y="35.8775" rot="R270"/>
 
<element name="C21" library="SparkFun" package="0603-CAP" value="0.1uF" x="21.59" y="35.2425" rot="R90"/>
 
<element name="C20" library="SparkFun" package="0603-CAP" value="10uF" x="26.9875" y="39.6875" rot="R180"/>
 
<element name="U3" library="Seeed" package="NEO-5Q" value="NEO-5Q" x="3.175" y="12.7" rot="R90"/>
 
<element name="R23" library="SparkFun" package="0603-RES" value="10R" x="7.3025" y="26.67"/>
 
<element name="L5" library="SparkFun" package="C0402" value="27nH" x="7.46125" y="28.2575"/>
 
<element name="U7" library="SeniorDesign" package="SOT23-5" value="24AA32AFT" x="10.795" y="9.525" rot="R180"/>
 
<element name="U$7" library="SeniorDesign" package="MS412FE-FL26E" value="MS412FE-FL26E" x="6.35" y="8.89" rot="R180"/>
 
<element name="D2" library="SparkFun" package="SOD-323" value="SCHOTTKEY" x="15.24" y="10.16"/>
 
<element name="R3" library="SparkFun" package="0603-RES" value="220R" x="19.05" y="8.89" rot="R270"/>
 
<element name="AUX0" library="adafruit" package="CHIPLED_0603" value="ORANGE" x="26.67" y="27.305" rot="R45"/>
 
<element name="R13" library="SparkFun" package="0603-RES" value="10k" x="29.845" y="28.2575" rot="R180"/>
 
@@ -11317,49 +11317,49 @@ Please make sure your boards conform to
 
<wire x1="20.955" y1="4.445" x2="16.295" y2="4.445" width="0.4064" layer="1"/>
 
<wire x1="14.39" y1="2.54" x2="16.295" y2="4.445" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="ERRLED">
 
<contactref element="IC1" pad="42"/>
 
<contactref element="R20" pad="1"/>
 
<wire x1="31.03" y1="14.11" x2="22.014590625" y2="14.11" width="0.4064" layer="1"/>
 
<wire x1="22.014590625" y1="14.11" x2="21.095" y2="13.190409375" width="0.4064" layer="1"/>
 
<wire x1="21.095" y1="13.190409375" x2="21.095" y2="5.86264375" width="0.4064" layer="1"/>
 
<wire x1="21.095" y1="5.86264375" x2="20.31235625" y2="5.08" width="0.4064" layer="1"/>
 
<wire x1="20.31235625" y1="5.08" x2="12.915" y2="5.08" width="0.4064" layer="1"/>
 
<wire x1="12.915" y1="5.08" x2="10.58" y2="2.54" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="POWLED">
 
<contactref element="IC1" pad="44"/>
 
<contactref element="R21" pad="1"/>
 
<wire x1="31.03" y1="12.51" x2="23.344965625" y2="12.51" width="0.4064" layer="1"/>
 
<wire x1="23.344965625" y1="12.51" x2="22.67" y2="11.835034375" width="0.4064" layer="1"/>
 
<wire x1="22.67" y1="11.835034375" x2="22.67" y2="3.2" width="0.4064" layer="1"/>
 
<wire x1="22.67" y1="3.2" x2="22.01" y2="2.54" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="N$13">
 
<contactref element="Q5" pad="C"/>
 
<contactref element="BUZZ" pad="2"/>
 
<wire x1="29.21" y1="48.875" x2="29.21" y2="46.82" width="0.4064" layer="1"/>
 
<wire x1="29.21" y1="48.5575" x2="29.21" y2="46.82" width="0.4064" layer="1"/>
 
<wire x1="29.21" y1="46.82" x2="30.48" y2="45.55" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="BUZZ">
 
<contactref element="IC1" pad="30"/>
 
<contactref element="R22" pad="1"/>
 
<via x="28.2575" y="42.8625" extent="1-16" drill="0.254"/>
 
<wire x1="26.67" y1="43.6" x2="27.52" y2="43.6" width="0.4064" layer="1"/>
 
<wire x1="27.52" y1="43.6" x2="28.2575" y2="42.8625" width="0.4064" layer="1"/>
 
<wire x1="28.2575" y1="42.8625" x2="33.655" y2="37.465" width="0.4064" layer="16"/>
 
<via x="33.655" y="37.465" extent="1-16" drill="0.254"/>
 
<wire x1="33.655" y1="37.465" x2="33.655" y2="31.4325" width="0.4064" layer="1"/>
 
<wire x1="33.655" y1="31.4325" x2="34.29" y2="30.7975" width="0.4064" layer="1"/>
 
<wire x1="34.29" y1="30.7975" x2="34.29" y2="25.4" width="0.4064" layer="1"/>
 
<wire x1="34.29" y1="25.4" x2="35.2425" y2="24.4475" width="0.4064" layer="1"/>
 
<wire x1="35.2425" y1="24.4475" x2="35.2425" y2="22.3225" width="0.4064" layer="1"/>
 
<wire x1="35.2425" y1="22.3225" x2="35.23" y2="22.31" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="SD_CS">
 
<contactref element="ASDF" pad="2"/>
 
<contactref element="R5" pad="1"/>
 
<contactref element="IC1" pad="40"/>
 
<wire x1="31.03" y1="15.71" x2="25.4" y2="15.71" width="0.4064" layer="1"/>
 
<wire x1="25.4" y1="15.71" x2="21.12" y2="15.71" width="0.4064" layer="1"/>
 
<wire x1="20.32" y1="16.51" x2="11.7475" y2="16.51" width="0.4064" layer="1"/>
 
@@ -11382,89 +11382,89 @@ Please make sure your boards conform to
 
<wire x1="16.09" y1="2.54" x2="16.09" y2="1.37" width="0.4064" layer="1"/>
 
<wire x1="16.09" y1="1.37" x2="15.99" y2="1.27" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="N$27">
 
<contactref element="R20" pad="2"/>
 
<contactref element="ERROR" pad="A"/>
 
<wire x1="12.18" y1="1.27" x2="12.18" y2="2.44" width="0.4064" layer="1"/>
 
<wire x1="12.18" y1="2.44" x2="12.28" y2="2.54" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="N$28">
 
<contactref element="R21" pad="2"/>
 
<contactref element="POWER" pad="A"/>
 
<wire x1="23.71" y1="2.54" x2="23.71" y2="1.37" width="0.4064" layer="1"/>
 
<wire x1="23.71" y1="1.37" x2="23.61" y2="1.27" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="N$20">
 
<contactref element="Q5" pad="B"/>
 
<contactref element="R22" pad="2"/>
 
<wire x1="26.67" y1="45.3" x2="27.58" y2="45.3" width="0.4064" layer="1"/>
 
<wire x1="27.58" y1="45.3" x2="29.53" y2="43.35" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="VBATRAW" class="1">
 
<contactref element="Q6" pad="3"/>
 
<contactref element="BATT" pad="1"/>
 
<wire x1="24.36" y1="48.875" x2="24.36" y2="47.05" width="0.8128" layer="1"/>
 
<wire x1="24.36" y1="48.5575" x2="24.36" y2="47.05" width="0.8128" layer="1"/>
 
<wire x1="24.36" y1="47.05" x2="22.86" y2="45.55" width="0.8128" layer="1"/>
 
</signal>
 
<signal name="VBAT">
 
<contactref element="Q6" pad="2"/>
 
<contactref element="5V_SWITCHING" pad="8"/>
 
<contactref element="C12" pad="1"/>
 
<contactref element="5V_SWITCHING" pad="7"/>
 
<contactref element="BUZZ" pad="1"/>
 
<wire x1="41.85" y1="33.655" x2="40.005" y2="33.655" width="0.4064" layer="1"/>
 
<wire x1="40.005" y1="33.655" x2="39.37" y2="33.02" width="0.4064" layer="1"/>
 
<contactref element="R29" pad="2"/>
 
<contactref element="Q7" pad="2"/>
 
<via x="23.8125" y="41.91" extent="1-16" drill="0.254"/>
 
<via x="25.0825" y="41.91" extent="1-16" drill="0.254"/>
 
<polygon width="0.4064" layer="1">
 
<vertex x="23.495" y="43.4975"/>
 
<vertex x="25.4" y="43.4975"/>
 
<vertex x="25.4" y="41.5925"/>
 
<vertex x="23.495" y="41.5925"/>
 
</polygon>
 
<via x="25.0825" y="43.18" extent="1-16" drill="0.254"/>
 
<wire x1="25.4" y1="41.91" x2="33.3375" y2="41.91" width="0.8128" layer="1"/>
 
<wire x1="33.3375" y1="41.91" x2="34.6075" y2="40.64" width="0.8128" layer="1"/>
 
<wire x1="34.6075" y1="40.64" x2="34.6075" y2="36.83" width="0.8128" layer="1"/>
 
<wire x1="34.6075" y1="36.83" x2="34.925" y2="36.5125" width="0.8128" layer="1"/>
 
<wire x1="34.925" y1="36.5125" x2="38.1" y2="33.02" width="0.8128" layer="1"/>
 
<polygon width="0.254" layer="1">
 
<vertex x="43.18" y="33.9725"/>
 
<vertex x="37.465" y="33.9725"/>
 
<vertex x="37.7825" y="33.02"/>
 
<vertex x="41.275" y="29.21"/>
 
<vertex x="44.45" y="29.21"/>
 
<vertex x="44.45" y="31.75"/>
 
<vertex x="43.18" y="31.75"/>
 
</polygon>
 
<wire x1="17.1475" y1="40.37" x2="15.7075" y2="40.37" width="0.8128" layer="1"/>
 
<wire x1="15.7075" y1="40.37" x2="15.5575" y2="40.22" width="0.8128" layer="1"/>
 
<wire x1="23.8125" y1="41.91" x2="18.6875" y2="41.91" width="0.8128" layer="1"/>
 
<wire x1="18.6875" y1="41.91" x2="17.1475" y2="40.37" width="0.8128" layer="1"/>
 
<wire x1="30.71" y1="48.875" x2="30.71" y2="47.22" width="0.8128" layer="16"/>
 
<wire x1="30.71" y1="48.5575" x2="30.71" y2="47.22" width="0.8128" layer="16"/>
 
<wire x1="30.71" y1="47.22" x2="26.67" y2="43.18" width="0.8128" layer="16"/>
 
<wire x1="26.67" y1="43.18" x2="25.0825" y2="43.18" width="0.8128" layer="16"/>
 
<wire x1="25.0825" y1="43.18" x2="25.0825" y2="41.91" width="0.8128" layer="16"/>
 
<wire x1="25.0825" y1="41.91" x2="23.8125" y2="41.91" width="0.8128" layer="16"/>
 
<wire x1="25.0825" y1="43.18" x2="23.8125" y2="43.18" width="0.8128" layer="16"/>
 
<wire x1="23.8125" y1="43.18" x2="23.8125" y2="41.91" width="0.8128" layer="16"/>
 
<wire x1="23.8125" y1="41.91" x2="25.0825" y2="43.18" width="0.8128" layer="16"/>
 
</signal>
 
<signal name="N$4">
 
<contactref element="5V_SWITCHING" pad="3"/>
 
<contactref element="C10" pad="1"/>
 
<wire x1="49.95" y1="33.655" x2="49.95" y2="33.87" width="0.4064" layer="1"/>
 
<wire x1="49.95" y1="33.87" x2="48.895" y2="34.925" width="0.4064" layer="1"/>
 
<wire x1="48.895" y1="34.925" x2="47.05" y2="34.925" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="N$18">
 
<contactref element="C10" pad="2"/>
 
<contactref element="R2" pad="2"/>
 
<wire x1="51.65" y1="33.655" x2="51.65" y2="31.115" width="0.4064" layer="1"/>
 
</signal>
 
<signal name="N$19">
 
<contactref element="5V_SWITCHING" pad="5"/>
 
<contactref element="C16" pad="1"/>
 
<wire x1="41.85" y1="36.195" x2="39.74375" y2="36.195" width="0.6096" layer="1"/>
 
@@ -11789,53 +11789,27 @@ Please make sure your boards conform to
 
<wire x1="41.5925" y1="4.1275" x2="41.5925" y2="3.2775" width="0.4064" layer="1"/>
 
<wire x1="41.5925" y1="3.2775" x2="41.49" y2="3.175" width="0.4064" layer="1"/>
 
<via x="44.60875" y="14.12875" extent="1-16" drill="0.254"/>
 
<wire x1="42.63" y1="14.11" x2="44.46875" y2="14.11" width="0.4064" layer="1"/>
 
<wire x1="44.46875" y1="14.11" x2="44.60875" y2="14.12875" width="0.4064" layer="1"/>
 
<wire x1="42.63" y1="14.11" x2="44.59" y2="14.11" width="0.4064" layer="1"/>
 
<wire x1="44.59" y1="14.11" x2="44.60875" y2="14.12875" width="0.4064" layer="1"/>
 
<wire x1="44.60875" y1="14.12875" x2="43.815" y2="13.335" width="0.4064" layer="16"/>
 
<wire x1="43.815" y1="13.335" x2="43.815" y2="7.62" width="0.4064" layer="16"/>
 
<wire x1="43.815" y1="7.62" x2="40.64" y2="4.445" width="0.4064" layer="16"/>
 
</signal>
 
<signal name="EREG2">
 
<contactref element="R9" pad="1"/>
 
<contactref element="IC1" pad="15"/>
 
<via x="43.97375" y="14.9225" extent="1-16" drill="0.254"/>
 
<wire x1="42.63" y1="14.91" x2="43.96125" y2="14.91" width="0.4064" layer="1"/>
 
<wire x1="43.96125" y1="14.91" x2="43.97375" y2="14.9225" width="0.4064" layer="1"/>
 
<via x="52.07" y="14.44625" extent="1-16" drill="0.254"/>
 
<wire x1="43.97375" y1="14.9225" x2="47.3075" y2="14.9225" width="0.4064" layer="16"/>
 
<wire x1="47.3075" y1="14.9225" x2="47.78375" y2="14.44625" width="0.4064" layer="16"/>
 
<wire x1="47.78375" y1="14.44625" x2="52.07" y2="14.44625" width="0.4064" layer="16"/>
 
<wire x1="52.07" y1="14.44625" x2="52.07" y2="16.295" width="0.4064" layer="1"/>
 
</signal>
 
</signals>
 
<errors>
 
<approved hash="4,1,a18fccf3d271891e"/>
 
<approved hash="4,1,e2111782e88d1e9c"/>
 
<approved hash="4,1,ee171cc3e34c121c"/>
 
<approved hash="4,1,ad1f18f424d39004"/>
 
<approved hash="4,1,e27117c2eb751d84"/>
 
<approved hash="4,1,ad1718fc24c3917c"/>
 
<approved hash="4,1,ee3f1b03e4f41d84"/>
 
<approved hash="4,1,e2111782e88d1e9c"/>
 
<approved hash="4,1,ee171cc3e34c121c"/>
 
<approved hash="4,1,ad1f18f424d39004"/>
 
<approved hash="4,1,e27117c2eb751d84"/>
 
<approved hash="4,1,ad1718fc24c3917c"/>
 
<approved hash="4,1,ee3f1b03e4f41d84"/>
 
<approved hash="4,1,e430c2a52b994232"/>
 
<approved hash="4,16,e2111782e88d1e9c"/>
 
<approved hash="4,16,a18fccf3d271891e"/>
 
<approved hash="4,16,ee171cc3e34c121c"/>
 
<approved hash="4,16,e2111782e88d1e9c"/>
 
<approved hash="4,16,ee3f1b03e4f41d84"/>
 
<approved hash="4,16,ee171cc3e34c121c"/>
 
<approved hash="4,16,e27117c2eb751d84"/>
 
<approved hash="4,16,e430c2a52b994232"/>
 
<approved hash="4,16,ee3f1b03e4f41d84"/>
 
<approved hash="4,16,e27117c2eb751d84"/>
 
</errors>
 
</board>
 
</drawing>
 
</eagle>
0 comments (0 inline, 0 general)
Server instance: zserverv-756375 This site is powered by Kallithea, which is © 2010–2021 by various authors & licensed under GPLv3. – Support