seniordesign-hardware Changeset - 2af621454cde

Changeset - 2af621454cde

Parent rev.

Child rev.

[Not reviewed]

default

0 1 0

mkroening@CL-SEC241-07.cedarville.edu - 12 years ago 2012-10-25 21:21:15
mkroening@CL-SEC241-07.cedarville.edu

Wired sensors on slave daughter MKr

1 file changed with 540 insertions and 0 deletions:

slave-daughter/slave-daughter-sensors.sch

540

0 comments (0 inline, 0 general)

slave-daughter/slave-daughter-sensors.sch

➞

Show inline comments

@@ @@ -375,6 +375,203 @@ We've spent an enormous amount of time c @@
 <rectangle x1="20.0279" y1="-0.2921" x2="20.6121" y2="0.2921" layer="51"/>
 <rectangle x1="22.5679" y1="-0.2921" x2="23.1521" y2="0.2921" layer="51" rot="R90"/>
 </package>
 <package name="CAP-PTH-SMALL">
 <wire x1="1.27" y1="0.635" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="0.7" diameter="1.651"/>
 <pad name="2" x="2.54" y="0" drill="0.7" diameter="1.651"/>
 <text x="0.508" y="1.27" size="0.4064" layer="25">&gt;Name</text>
 <text x="0.254" y="-1.524" size="0.4064" layer="27">&gt;Value</text>
 </package>
 <package name="CAP-PTH-SMALL2">
 <wire x1="1.27" y1="0.635" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="-1.27" y1="1.27" x2="3.81" y2="1.27" width="0.2032" layer="21"/>
 <wire x1="3.81" y1="1.27" x2="3.81" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="3.81" y1="-1.27" x2="-1.27" y2="-1.27" width="0.2032" layer="21"/>
 <wire x1="-1.27" y1="-1.27" x2="-1.27" y2="1.27" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="0.7" diameter="1.651"/>
 <pad name="2" x="2.54" y="0" drill="0.7" diameter="1.651"/>
 <text x="-1.27" y="1.905" size="0.6096" layer="25">&gt;Name</text>
 <text x="-1.27" y="-2.54" size="0.6096" layer="27">&gt;Value</text>
 </package>
 <package name="0805">
 <wire x1="-0.3" y1="0.6" x2="0.3" y2="0.6" width="0.1524" layer="21"/>
 <wire x1="-0.3" y1="-0.6" x2="0.3" y2="-0.6" width="0.1524" layer="21"/>
 <smd name="1" x="-0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
 <smd name="2" x="0.9" y="0" dx="0.8" dy="1.2" layer="1"/>
 <text x="-0.762" y="0.8255" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-1.397" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="CAP-PTH-LARGE">
 <wire x1="0" y1="0.635" x2="0" y2="0" width="0.2032" layer="21"/>
 <wire x1="0" y1="0" x2="0" y2="-0.635" width="0.2032" layer="21"/>
 <wire x1="0" y1="0" x2="-2.54" y2="0" width="0.2032" layer="21"/>
 <wire x1="0" y1="0" x2="2.54" y2="0" width="0.2032" layer="21"/>
 <pad name="1" x="-4.826" y="0" drill="0.9" diameter="1.905"/>
 <pad name="2" x="4.572" y="0" drill="0.9" diameter="1.905"/>
 <text x="-0.762" y="1.27" size="0.4064" layer="25">&gt;Name</text>
 <text x="-1.016" y="-1.524" size="0.4064" layer="27">&gt;Value</text>
 </package>
 <package name="GRM43D">
 <wire x1="2.25" y1="1.6" x2="1.1" y2="1.6" width="0.127" layer="51"/>
 <wire x1="1.1" y1="1.6" x2="-1.1" y2="1.6" width="0.127" layer="51"/>
 <wire x1="-1.1" y1="1.6" x2="-2.25" y2="1.6" width="0.127" layer="51"/>
 <wire x1="-2.25" y1="1.6" x2="-2.25" y2="-1.6" width="0.127" layer="51"/>
 <wire x1="-2.25" y1="-1.6" x2="-1.1" y2="-1.6" width="0.127" layer="51"/>
 <wire x1="-1.1" y1="-1.6" x2="1.1" y2="-1.6" width="0.127" layer="51"/>
 <wire x1="1.1" y1="-1.6" x2="2.25" y2="-1.6" width="0.127" layer="51"/>
 <wire x1="2.25" y1="-1.6" x2="2.25" y2="1.6" width="0.127" layer="51"/>
 <wire x1="1.1" y1="1.6" x2="1.1" y2="-1.6" width="0.127" layer="51"/>
 <wire x1="-1.1" y1="1.6" x2="-1.1" y2="-1.6" width="0.127" layer="51"/>
 <wire x1="-2.3" y1="1.8" x2="2.3" y2="1.8" width="0.127" layer="21"/>
 <wire x1="-2.3" y1="-1.8" x2="2.3" y2="-1.8" width="0.127" layer="21"/>
 <smd name="A" x="1.927" y="0" dx="3.2" dy="1.65" layer="1" rot="R90"/>
 <smd name="C" x="-1.927" y="0" dx="3.2" dy="1.65" layer="1" rot="R90"/>
 <text x="-2" y="2" size="0.4064" layer="25">&gt;NAME</text>
 <text x="0" y="-2" size="0.4064" layer="27" rot="R180">&gt;VALUE</text>
 <rectangle x1="-2.2" y1="-1.6" x2="-1.1" y2="1.6" layer="51"/>
 <rectangle x1="1.1" y1="-1.6" x2="2.2" y2="1.6" layer="51"/>
 </package>
 <package name="0603-CAP">
 <wire x1="-1.473" y1="0.983" x2="1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="0.983" x2="1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
 <wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
 <wire x1="0" y1="0.0305" x2="0" y2="-0.0305" width="0.5588" layer="21"/>
 <smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
 <text x="-0.889" y="0.762" size="0.4064" layer="25" font="vector">&gt;NAME</text>
 <text x="-1.016" y="-1.143" size="0.4064" layer="27" font="vector">&gt;VALUE</text>
 <rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
 <rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 </package>
 <package name="0402-CAP">
 <description>&lt;b&gt;CAPACITOR&lt;/b&gt;&lt;p&gt;
 chip</description>
 <wire x1="-0.245" y1="0.224" x2="0.245" y2="0.224" width="0.1524" layer="51"/>
 <wire x1="0.245" y1="-0.224" x2="-0.245" y2="-0.224" width="0.1524" layer="51"/>
 <wire x1="-1.473" y1="0.483" x2="1.473" y2="0.483" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="0.483" x2="1.473" y2="-0.483" width="0.0508" layer="39"/>
 <wire x1="1.473" y1="-0.483" x2="-1.473" y2="-0.483" width="0.0508" layer="39"/>
 <wire x1="-1.473" y1="-0.483" x2="-1.473" y2="0.483" width="0.0508" layer="39"/>
 <wire x1="0" y1="0.0305" x2="0" y2="-0.0305" width="0.4064" layer="21"/>
 <smd name="1" x="-0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
 <smd name="2" x="0.65" y="0" dx="0.7" dy="0.9" layer="1"/>
 <text x="-0.889" y="0.6985" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.0795" y="-1.143" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.554" y1="-0.3048" x2="-0.254" y2="0.2951" layer="51"/>
 <rectangle x1="0.2588" y1="-0.3048" x2="0.5588" y2="0.2951" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 </package>
 <package name="CAP-PTH-5MM">
 <wire x1="0" y1="0.635" x2="0" y2="-0.635" width="0.2032" layer="21"/>
 <pad name="1" x="-2.5" y="0" drill="0.7" diameter="1.651"/>
 <pad name="2" x="2.5" y="0" drill="0.7" diameter="1.651"/>
 <text x="-0.762" y="1.27" size="0.4064" layer="25">&gt;Name</text>
 <text x="-1.016" y="-1.524" size="0.4064" layer="27">&gt;Value</text>
 </package>
 <package name="AXIAL-5MM">
 <wire x1="-1.14" y1="0.762" x2="1.14" y2="0.762" width="0.2032" layer="21"/>
 <wire x1="1.14" y1="0.762" x2="1.14" y2="0" width="0.2032" layer="21"/>
 <wire x1="1.14" y1="0" x2="1.14" y2="-0.762" width="0.2032" layer="21"/>
 <wire x1="1.14" y1="-0.762" x2="-1.14" y2="-0.762" width="0.2032" layer="21"/>
 <wire x1="-1.14" y1="-0.762" x2="-1.14" y2="0" width="0.2032" layer="21"/>
 <wire x1="-1.14" y1="0" x2="-1.14" y2="0.762" width="0.2032" layer="21"/>
 <wire x1="1.14" y1="0" x2="1.394" y2="0" width="0.2032" layer="21"/>
 <wire x1="-1.14" y1="0" x2="-1.394" y2="0" width="0.2032" layer="21"/>
 <pad name="P$1" x="-2.5" y="0" drill="0.9" diameter="1.8796"/>
 <pad name="P$2" x="2.5" y="0" drill="0.9" diameter="1.8796"/>
 <text x="-2.54" y="1.17" size="0.4" layer="25">&gt;Name</text>
 <text x="-1.032" y="-0.208" size="0.4" layer="21" ratio="15">&gt;Value</text>
 </package>
 <package name="1210">
 <wire x1="-1.6" y1="1.3" x2="1.6" y2="1.3" width="0.127" layer="51"/>
 <wire x1="1.6" y1="1.3" x2="1.6" y2="-1.3" width="0.127" layer="51"/>
 <wire x1="1.6" y1="-1.3" x2="-1.6" y2="-1.3" width="0.127" layer="51"/>
 <wire x1="-1.6" y1="-1.3" x2="-1.6" y2="1.3" width="0.127" layer="51"/>
 <wire x1="-1.6" y1="1.3" x2="1.6" y2="1.3" width="0.2032" layer="21"/>
 <wire x1="-1.6" y1="-1.3" x2="1.6" y2="-1.3" width="0.2032" layer="21"/>
 <smd name="1" x="-1.6" y="0" dx="1.2" dy="2" layer="1"/>
 <smd name="2" x="1.6" y="0" dx="1.2" dy="2" layer="1"/>
 <text x="-0.8" y="0.5" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-0.9" y="-0.7" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="1206">
 <wire x1="-2.473" y1="0.983" x2="2.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="2.473" y1="-0.983" x2="-2.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-2.473" y1="-0.983" x2="-2.473" y2="0.983" width="0.0508" layer="39"/>
 <wire x1="2.473" y1="0.983" x2="2.473" y2="-0.983" width="0.0508" layer="39"/>
 <wire x1="-0.965" y1="0.787" x2="0.965" y2="0.787" width="0.1016" layer="51"/>
 <wire x1="-0.965" y1="-0.787" x2="0.965" y2="-0.787" width="0.1016" layer="51"/>
 <smd name="1" x="-1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
 <smd name="2" x="1.4" y="0" dx="1.6" dy="1.8" layer="1"/>
 <text x="-1.27" y="1.143" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.397" y="-1.524" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-1.7018" y1="-0.8509" x2="-0.9517" y2="0.8491" layer="51"/>
 <rectangle x1="0.9517" y1="-0.8491" x2="1.7018" y2="0.8509" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.4001" x2="0.1999" y2="0.4001" layer="35"/>
 </package>
 <package name="CTZ3">
 <description>CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF</description>
 <wire x1="-1.6" y1="1.4" x2="-1.6" y2="-2.25" width="0.127" layer="51"/>
 <wire x1="-1.6" y1="-2.25" x2="1.6" y2="-2.25" width="0.127" layer="51"/>
 <wire x1="1.6" y1="1.4" x2="1.6" y2="-2.25" width="0.127" layer="51"/>
 <wire x1="-0.5" y1="0" x2="0.5" y2="0" width="0.127" layer="51"/>
 <wire x1="-1.6" y1="1.4" x2="-1" y2="2.2" width="0.127" layer="51"/>
 <wire x1="1.6" y1="1.4" x2="1" y2="2.2" width="0.127" layer="51"/>
 <wire x1="-1" y1="2.2" x2="1" y2="2.2" width="0.127" layer="51"/>
 <wire x1="0" y1="0.8" x2="0" y2="-0.8" width="0.127" layer="51"/>
 <wire x1="-0.8" y1="0" x2="0.8" y2="0" width="0.127" layer="51"/>
 <wire x1="-1.05" y1="2.25" x2="-1.7" y2="1.45" width="0.127" layer="21"/>
 <wire x1="-1.7" y1="1.45" x2="-1.7" y2="-2.35" width="0.127" layer="21"/>
 <wire x1="-1.7" y1="-2.35" x2="-1.05" y2="-2.35" width="0.127" layer="21"/>
 <wire x1="1.05" y1="2.25" x2="1.7" y2="1.4" width="0.127" layer="21"/>
 <wire x1="1.7" y1="1.4" x2="1.7" y2="-2.35" width="0.127" layer="21"/>
 <wire x1="1.7" y1="-2.35" x2="1.05" y2="-2.35" width="0.127" layer="21"/>
 <smd name="+" x="0" y="2.05" dx="1.5" dy="1.2" layer="1"/>
 <smd name="-" x="0" y="-2.05" dx="1.5" dy="1.2" layer="1"/>
 <text x="-2" y="3" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-2" y="-3.4" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="CAP-PTH-SMALL-KIT">
 <description>&lt;h3&gt;CAP-PTH-SMALL-KIT&lt;/h3&gt;
 Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).&lt;br&gt;
 &lt;br&gt;
 &lt;b&gt;Warning:&lt;/b&gt; This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</description>
 <wire x1="0" y1="0.635" x2="0" y2="-0.635" width="0.254" layer="21"/>
 <wire x1="-2.667" y1="1.27" x2="2.667" y2="1.27" width="0.254" layer="21"/>
 <wire x1="2.667" y1="1.27" x2="2.667" y2="-1.27" width="0.254" layer="21"/>
 <wire x1="2.667" y1="-1.27" x2="-2.667" y2="-1.27" width="0.254" layer="21"/>
 <wire x1="-2.667" y1="-1.27" x2="-2.667" y2="1.27" width="0.254" layer="21"/>
 <pad name="1" x="-1.397" y="0" drill="1.016" diameter="2.032" stop="no"/>
 <pad name="2" x="1.397" y="0" drill="1.016" diameter="2.032" stop="no"/>
 <polygon width="0.127" layer="30">
 <vertex x="-1.4021" y="-0.9475" curve="-90"/>
 <vertex x="-2.357" y="-0.0178" curve="-90.011749"/>
 <vertex x="-1.4046" y="0.9576" curve="-90"/>
 <vertex x="-0.4546" y="-0.0204" curve="-90.024193"/>
 </polygon>
 <polygon width="0.127" layer="29">
 <vertex x="-1.4046" y="-0.4395" curve="-90.012891"/>
 <vertex x="-1.8491" y="-0.0153" curve="-90"/>
 <vertex x="-1.4046" y="0.452" curve="-90"/>
 <vertex x="-0.9627" y="-0.0051" curve="-90.012967"/>
 </polygon>
 <polygon width="0.127" layer="30">
 <vertex x="1.397" y="-0.9475" curve="-90"/>
 <vertex x="0.4421" y="-0.0178" curve="-90.011749"/>
 <vertex x="1.3945" y="0.9576" curve="-90"/>
 <vertex x="2.3445" y="-0.0204" curve="-90.024193"/>
 </polygon>
 <polygon width="0.127" layer="29">
 <vertex x="1.3945" y="-0.4395" curve="-90.012891"/>
 <vertex x="0.95" y="-0.0153" curve="-90"/>
 <vertex x="1.3945" y="0.452" curve="-90"/>
 <vertex x="1.8364" y="-0.0051" curve="-90.012967"/>
 </polygon>
 </package>
 </packages>
 <symbols>
 <symbol name="LETTER_L">
@@ @@ -440,6 +637,16 @@ We've spent an enormous amount of time c @@
 <pin name="9" x="10.16" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="10" x="10.16" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 </symbol>
 <symbol name="CAP">
 <wire x1="0" y1="2.54" x2="0" y2="2.032" width="0.1524" layer="94"/>
 <wire x1="0" y1="0" x2="0" y2="0.508" width="0.1524" layer="94"/>
 <text x="1.524" y="2.921" size="1.778" layer="95">&gt;NAME</text>
 <text x="1.524" y="-2.159" size="1.778" layer="96">&gt;VALUE</text>
 <rectangle x1="-2.032" y1="0.508" x2="2.032" y2="1.016" layer="94"/>
 <rectangle x1="-2.032" y1="1.524" x2="2.032" y2="2.032" layer="94"/>
 <pin name="1" x="0" y="5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
 <pin name="2" x="0" y="-2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="FRAME-LETTER" prefix="FRAME">
@@ @@ -551,6 +758,255 @@ Standard 10-pin 0.1" header. Use with st @@
 </device>
 </devices>
 </deviceset>
 <deviceset name="CAP" prefix="C" uservalue="yes">
 <description>&lt;b&gt;Capacitor&lt;/b&gt;
 Standard 0603 ceramic capacitor, and 0.1" leaded capacitor.</description>
 <gates>
 <gate name="G$1" symbol="CAP" x="0" y="0"/>
 </gates>
 <devices>
 <device name="PTH" package="CAP-PTH-SMALL">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH2" package="CAP-PTH-SMALL2">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0805" package="0805">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH3" package="CAP-PTH-LARGE">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SMD" package="GRM43D">
 <connects>
 <connect gate="G$1" pin="1" pad="A"/>
 <connect gate="G$1" pin="2" pad="C"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0603-CAP" package="0603-CAP">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="0402-CAP" package="0402-CAP">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="PTH1" package="CAP-PTH-5MM">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="_" package="AXIAL-5MM">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="1210" package="1210">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="1206" package="1206">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="ASMD" package="CTZ3">
 <connects>
 <connect gate="G$1" pin="1" pad="+"/>
 <connect gate="G$1" pin="2" pad="-"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="KIT" package="CAP-PTH-SMALL-KIT">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="SeniorDesign">
 <packages>
 <package name="SOIC8">
 <wire x1="2.4" y1="1.9" x2="2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="2.4" y2="-1.9" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.9" x2="-2.4" y2="-1.9" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="-1.9" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="-1.4" x2="-2.4" y2="1.9" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="1.9" x2="2.4" y2="1.9" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/>
 <smd name="2" x="-0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="7" x="-0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="1" x="-1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="3" x="0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="4" x="1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="8" x="-1.905" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="6" x="0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="5" x="1.905" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <text x="-3.175" y="-1.905" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 <text x="4.445" y="-1.905" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-2.1501" y1="-3.1001" x2="-1.6599" y2="-2" layer="51"/>
 <rectangle x1="-0.8801" y1="-3.1001" x2="-0.3899" y2="-2" layer="51"/>
 <rectangle x1="0.3899" y1="-3.1001" x2="0.8801" y2="-2" layer="51"/>
 <rectangle x1="1.6599" y1="-3.1001" x2="2.1501" y2="-2" layer="51"/>
 <rectangle x1="1.6599" y1="2" x2="2.1501" y2="3.1001" layer="51"/>
 <rectangle x1="0.3899" y1="2" x2="0.8801" y2="3.1001" layer="51"/>
 <rectangle x1="-0.8801" y1="2" x2="-0.3899" y2="3.1001" layer="51"/>
 <rectangle x1="-2.1501" y1="2" x2="-1.6599" y2="3.1001" layer="51"/>
 </package>
 <package name="MAX44009">
 <wire x1="0" y1="0" x2="0" y2="2" width="0.127" layer="21"/>
 <wire x1="0" y1="0" x2="2" y2="0" width="0.127" layer="21"/>
 <wire x1="0" y1="2" x2="2" y2="2" width="0.127" layer="21"/>
 <wire x1="2" y1="2" x2="2" y2="0" width="0.127" layer="21"/>
 <smd name="3" x="0.13" y="0.34" dx="0.36" dy="0.48" layer="1" rot="R90"/>
 <smd name="2" x="0.13" y="1" dx="0.36" dy="0.48" layer="1" rot="R90"/>
 <smd name="1" x="0.13" y="1.66" dx="0.36" dy="0.48" layer="1" rot="R90"/>
 <smd name="6" x="1.89" y="1.66" dx="0.36" dy="0.48" layer="1" rot="R90"/>
 <smd name="5" x="1.89" y="1" dx="0.36" dy="0.48" layer="1" rot="R90"/>
 <smd name="4" x="1.89" y="0.35" dx="0.36" dy="0.48" layer="1" rot="R90"/>
 <smd name="P$7" x="1.02" y="1" dx="0.71" dy="1.4" layer="1"/>
 <text x="0" y="2.26" size="0.6096" layer="25">&gt;NAME</text>
 </package>
 </packages>
 <symbols>
 <symbol name="HIH6131-021-001">
 <wire x1="-10.16" y1="10.16" x2="-10.16" y2="-10.16" width="0.254" layer="94"/>
 <wire x1="-10.16" y1="-10.16" x2="10.16" y2="-10.16" width="0.254" layer="94"/>
 <wire x1="10.16" y1="-10.16" x2="10.16" y2="10.16" width="0.254" layer="94"/>
 <wire x1="10.16" y1="10.16" x2="-10.16" y2="10.16" width="0.254" layer="94"/>
 <pin name="VDD" x="-15.24" y="7.62" length="middle"/>
 <pin name="VCORE" x="-15.24" y="2.54" length="middle"/>
 <pin name="VSS" x="-15.24" y="-2.54" length="middle"/>
 <pin name="NC" x="-15.24" y="-7.62" length="middle"/>
 <pin name="SCL" x="15.24" y="7.62" length="middle" rot="R180"/>
 <pin name="SDA" x="15.24" y="2.54" length="middle" rot="R180"/>
 <pin name="AL_L" x="15.24" y="-2.54" length="middle" rot="R180"/>
 <pin name="AL_H" x="15.24" y="-7.62" length="middle" rot="R180"/>
 </symbol>
 <symbol name="MAX44009">
 <wire x1="-10.16" y1="5.08" x2="5.08" y2="5.08" width="0.254" layer="94"/>
 <wire x1="5.08" y1="5.08" x2="5.08" y2="-10.16" width="0.254" layer="94"/>
 <wire x1="5.08" y1="-10.16" x2="-10.16" y2="-10.16" width="0.254" layer="94"/>
 <wire x1="-10.16" y1="-10.16" x2="-10.16" y2="5.08" width="0.254" layer="94"/>
 <pin name="A0" x="-15.24" y="-5.08" length="middle"/>
 <pin name="GND" x="-15.24" y="-7.62" length="middle"/>
 <pin name="VCC" x="-15.24" y="2.54" length="middle"/>
 <pin name="SDA" x="10.16" y="2.54" length="middle" rot="R180"/>
 <pin name="SCL" x="10.16" y="0" length="middle" rot="R180"/>
 <pin name="!INT" x="10.16" y="-5.08" length="middle" rot="R180"/>
 <text x="-10.16" y="7.62" size="1.778" layer="95" rot="MR180">&gt;NAME</text>
 <text x="-10.16" y="-12.7" size="1.778" layer="96">&gt;VALUE</text>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="HIH6131-021-001">
 <description>Humidity Sensor</description>
 <gates>
 <gate name="G$1" symbol="HIH6131-021-001" x="0" y="0"/>
 </gates>
 <devices>
 <device name="" package="SOIC8">
 <connects>
 <connect gate="G$1" pin="AL_H" pad="5"/>
 <connect gate="G$1" pin="AL_L" pad="6"/>
 <connect gate="G$1" pin="NC" pad="7"/>
 <connect gate="G$1" pin="SCL" pad="3"/>
 <connect gate="G$1" pin="SDA" pad="4"/>
 <connect gate="G$1" pin="VCORE" pad="1"/>
 <connect gate="G$1" pin="VDD" pad="8"/>
 <connect gate="G$1" pin="VSS" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="MAX44009">
 <description>Ambient Light Sensor
 i2c</description>
 <gates>
 <gate name="G$1" symbol="MAX44009" x="2.54" y="2.54"/>
 </gates>
 <devices>
 <device name="" package="MAX44009">
 <connects>
 <connect gate="G$1" pin="!INT" pad="4"/>
 <connect gate="G$1" pin="A0" pad="3"/>
 <connect gate="G$1" pin="GND" pad="2"/>
 <connect gate="G$1" pin="SCL" pad="5"/>
 <connect gate="G$1" pin="SDA" pad="6"/>
 <connect gate="G$1" pin="VCC" pad="1"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 </libraries>
@@ @@ -566,6 +1022,11 @@ Standard 10-pin 0.1" header. Use with st @@
 <part name="FRAME1" library="SparkFun" deviceset="FRAME-LETTER" device=""/>
 <part name="JP1" library="SparkFun" deviceset="M10" device="LOCK"/>
 <part name="JP2" library="SparkFun" deviceset="M10" device="LOCK"/>
 <part name="U$1" library="SeniorDesign" deviceset="HIH6131-021-001" device=""/>
 <part name="U$2" library="SeniorDesign" deviceset="MAX44009" device=""/>
 <part name="C1" library="SparkFun" deviceset="CAP" device="0603-CAP" value="0.1uF"/>
 <part name="C2" library="SparkFun" deviceset="CAP" device="0603-CAP" value="0.22uF"/>
 <part name="C3" library="SparkFun" deviceset="CAP" device="0603-CAP" value="1uF"/>
 </parts>
 <sheets>
 <sheet>
@@ @@ -580,6 +1041,11 @@ Standard 10-pin 0.1" header. Use with st @@
 <instance part="FRAME1" gate="G$2" x="147.32" y="0"/>
 <instance part="JP1" gate="G$1" x="12.7" y="160.02"/>
 <instance part="JP2" gate="G$1" x="12.7" y="121.92"/>
 <instance part="U$1" gate="G$1" x="116.84" y="144.78"/>
 <instance part="U$2" gate="G$1" x="121.92" y="93.98"/>
 <instance part="C1" gate="G$1" x="93.98" y="142.24"/>
 <instance part="C2" gate="G$1" x="83.82" y="142.24"/>
 <instance part="C3" gate="G$1" x="91.44" y="91.44"/>
 </instances>
 <busses>
 </busses>
@@ @@ -590,6 +1056,33 @@ Standard 10-pin 0.1" header. Use with st @@
 <wire x1="22.86" y1="142.24" x2="33.02" y2="142.24" width="0.1524" layer="91"/>
 <label x="27.94" y="142.24" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$1" gate="G$1" pin="VSS"/>
 <wire x1="101.6" y1="142.24" x2="96.52" y2="142.24" width="0.1524" layer="91"/>
 <label x="73.66" y="137.16" size="1.778" layer="95"/>
 <wire x1="96.52" y1="142.24" x2="96.52" y2="137.16" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="137.16" x2="93.98" y2="137.16" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="2"/>
 <wire x1="93.98" y1="137.16" x2="83.82" y2="137.16" width="0.1524" layer="91"/>
 <wire x1="83.82" y1="137.16" x2="76.2" y2="137.16" width="0.1524" layer="91"/>
 <wire x1="93.98" y1="139.7" x2="93.98" y2="137.16" width="0.1524" layer="91"/>
 <junction x="93.98" y="137.16"/>
 <pinref part="C2" gate="G$1" pin="2"/>
 <wire x1="83.82" y1="139.7" x2="83.82" y2="137.16" width="0.1524" layer="91"/>
 <junction x="83.82" y="137.16"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="GND"/>
 <wire x1="106.68" y1="86.36" x2="104.14" y2="86.36" width="0.1524" layer="91"/>
 <pinref part="C3" gate="G$1" pin="2"/>
 <wire x1="104.14" y1="86.36" x2="91.44" y2="86.36" width="0.1524" layer="91"/>
 <wire x1="91.44" y1="86.36" x2="91.44" y2="88.9" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="A0"/>
 <wire x1="106.68" y1="88.9" x2="104.14" y2="88.9" width="0.1524" layer="91"/>
 <wire x1="104.14" y1="88.9" x2="104.14" y2="86.36" width="0.1524" layer="91"/>
 <wire x1="91.44" y1="86.36" x2="91.44" y2="81.28" width="0.1524" layer="91"/>
 <label x="91.44" y="81.28" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="VBAT" class="0">
 <segment>
@@ @@ -604,6 +1097,26 @@ Standard 10-pin 0.1" header. Use with st @@
 <wire x1="22.86" y1="147.32" x2="33.02" y2="147.32" width="0.1524" layer="91"/>
 <label x="27.94" y="147.32" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$1" gate="G$1" pin="VDD"/>
 <wire x1="101.6" y1="152.4" x2="83.82" y2="152.4" width="0.1524" layer="91"/>
 <label x="76.2" y="152.4" size="1.778" layer="95"/>
 <pinref part="C2" gate="G$1" pin="1"/>
 <wire x1="83.82" y1="152.4" x2="76.2" y2="152.4" width="0.1524" layer="91"/>
 <wire x1="83.82" y1="147.32" x2="83.82" y2="152.4" width="0.1524" layer="91"/>
 <junction x="83.82" y="152.4"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="VCC"/>
 <wire x1="106.68" y1="96.52" x2="96.52" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="96.52" x2="96.52" y2="99.06" width="0.1524" layer="91"/>
 <pinref part="C3" gate="G$1" pin="1"/>
 <wire x1="96.52" y1="99.06" x2="96.52" y2="104.14" width="0.1524" layer="91"/>
 <wire x1="91.44" y1="96.52" x2="91.44" y2="99.06" width="0.1524" layer="91"/>
 <wire x1="91.44" y1="99.06" x2="96.52" y2="99.06" width="0.1524" layer="91"/>
 <junction x="96.52" y="99.06"/>
 <label x="96.52" y="104.14" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="MOSI" class="0">
 <segment>
@@ @@ -660,6 +1173,16 @@ Standard 10-pin 0.1" header. Use with st @@
 <wire x1="22.86" y1="104.14" x2="33.02" y2="104.14" width="0.1524" layer="91"/>
 <label x="27.94" y="104.14" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$1" gate="G$1" pin="SCL"/>
 <wire x1="132.08" y1="152.4" x2="139.7" y2="152.4" width="0.1524" layer="91"/>
 <label x="134.62" y="152.4" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="SCL"/>
 <wire x1="132.08" y1="93.98" x2="139.7" y2="93.98" width="0.1524" layer="91"/>
 <label x="134.62" y="93.98" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="SDA" class="0">
 <segment>
@@ @@ -667,6 +1190,16 @@ Standard 10-pin 0.1" header. Use with st @@
 <wire x1="22.86" y1="106.68" x2="33.02" y2="106.68" width="0.1524" layer="91"/>
 <label x="27.94" y="106.68" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$1" gate="G$1" pin="SDA"/>
 <wire x1="132.08" y1="147.32" x2="139.7" y2="147.32" width="0.1524" layer="91"/>
 <label x="134.62" y="147.32" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="SDA"/>
 <wire x1="132.08" y1="96.52" x2="139.7" y2="96.52" width="0.1524" layer="91"/>
 <label x="134.62" y="96.52" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA0" class="0">
 <segment>
@@ @@ -724,6 +1257,13 @@ Standard 10-pin 0.1" header. Use with st @@
 <label x="27.94" y="127" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="N$7" class="0">
 <segment>
 <pinref part="U$1" gate="G$1" pin="VCORE"/>
 <wire x1="101.6" y1="147.32" x2="93.98" y2="147.32" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="1"/>
 </segment>
 </net>
 </nets>
 </sheet>
 </sheets>

0 comments (0 inline, 0 general)