seniordesign-hardware Changeset - 36a9518c57a5

Changeset - 36a9518c57a5

Parent rev.

Child rev.

[Not reviewed]

default

0 2 0

kripperger@CL-SEC241-09.cedarville.edu - 12 years ago 2013-04-12 22:08:38
kripperger@CL-SEC241-09.cedarville.edu

Some of the new gieiger revisions

2 files changed with 455 insertions and 457 deletions:

slave-daughter/slave-daughter-gieger3.brd

slave-daughter/slave-daughter-gieger3.sch

384

382

0 comments (0 inline, 0 general)

slave-daughter/slave-daughter-gieger3.brd

➞

Show inline comments

@@ @@ -207,21 +207,6 @@ We've spent an enormous amount of time c @@
 <rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
 <rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 </package>
 <package name="SOT23">
 <description>&lt;b&gt;SOT-23&lt;/b&gt;</description>
 <wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.6604" width="0.1524" layer="51"/>
 <wire x1="1.4224" y1="-0.6604" x2="-1.4224" y2="-0.6604" width="0.1524" layer="51"/>
 <wire x1="-1.4224" y1="-0.6604" x2="-1.4224" y2="0.6604" width="0.1524" layer="51"/>
 <wire x1="-1.4224" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="51"/>
 <smd name="3" x="0" y="1.1" dx="1" dy="1.4" layer="1"/>
 <smd name="2" x="0.95" y="-1.1" dx="1" dy="1.4" layer="1"/>
 <smd name="1" x="-0.95" y="-1.1" dx="1" dy="1.4" layer="1"/>
 <text x="-0.889" y="2.032" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-0.1905" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.2286" y1="0.7112" x2="0.2286" y2="1.2954" layer="51"/>
 <rectangle x1="0.7112" y1="-1.2954" x2="1.1684" y2="-0.7112" layer="51"/>
 <rectangle x1="-1.1684" y1="-1.2954" x2="-0.7112" y2="-0.7112" layer="51"/>
 </package>
 <package name="LED-0603">
 <wire x1="0.46" y1="0.17" x2="0" y2="0.17" width="0.2032" layer="21"/>
 <wire x1="-0.46" y1="0.17" x2="0" y2="0.17" width="0.2032" layer="21"/>
@@ @@ -328,6 +313,32 @@ Basic SMA packaged diode. Good for rever @@
 <text x="-2.6" y="2.7" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-2.6" y="-3.45" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="SOD-323">
 <wire x1="-0.9" y1="0.65" x2="-0.5" y2="0.65" width="0.2032" layer="21"/>
 <wire x1="-0.5" y1="0.65" x2="0.9" y2="0.65" width="0.2032" layer="21"/>
 <wire x1="-0.9" y1="-0.65" x2="-0.5" y2="-0.65" width="0.2032" layer="21"/>
 <wire x1="-0.5" y1="-0.65" x2="0.9" y2="-0.65" width="0.2032" layer="21"/>
 <wire x1="-0.5" y1="0.65" x2="-0.5" y2="-0.65" width="0.2032" layer="21"/>
 <smd name="1" x="-1.15" y="0" dx="0.63" dy="0.83" layer="1"/>
 <smd name="2" x="1.15" y="0" dx="0.63" dy="0.83" layer="1"/>
 <text x="-0.889" y="1.016" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-1.397" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="SOT23-3">
 <wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.6604" width="0.1524" layer="51"/>
 <wire x1="1.4224" y1="-0.6604" x2="-1.4224" y2="-0.6604" width="0.1524" layer="51"/>
 <wire x1="-1.4224" y1="-0.6604" x2="-1.4224" y2="0.6604" width="0.1524" layer="51"/>
 <wire x1="-1.4224" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="51"/>
 <wire x1="-0.8" y1="0.7" x2="-1.4" y2="0.7" width="0.2032" layer="21"/>
 <wire x1="-1.4" y1="0.7" x2="-1.4" y2="-0.1" width="0.2032" layer="21"/>
 <wire x1="0.8" y1="0.7" x2="1.4" y2="0.7" width="0.2032" layer="21"/>
 <wire x1="1.4" y1="0.7" x2="1.4" y2="-0.1" width="0.2032" layer="21"/>
 <smd name="3" x="0" y="1.1" dx="0.8" dy="0.9" layer="1"/>
 <smd name="2" x="0.95" y="-1" dx="0.8" dy="0.9" layer="1"/>
 <smd name="1" x="-0.95" y="-1" dx="0.8" dy="0.9" layer="1"/>
 <text x="-0.8255" y="1.778" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-0.1905" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 </packages>
 </library>
 <library name="SeniorDesign">
@@ @@ -21483,10 +21494,7 @@ Please make sure your boards conform to @@
 <element name="U$1" library="SparkFun" package="GEIGER_TUBE" value="GEIGER_TUBELND712" x="46.355" y="4.445" rot="R90"/>
 <element name="R1" library="SparkFun" package="0603-RES" value="1M" x="41.402" y="10.16" rot="R270"/>
 <element name="R2" library="SparkFun" package="0603-RES" value="10M" x="41.402" y="6.35" rot="R270"/>
 <element name="R5" library="SparkFun" package="0603-RES" value="1K" x="17.78" y="6.5405" rot="R90"/>
 <element name="R6" library="SparkFun" package="0603-RES" value="1.8K" x="6.35" y="5.4356"/>
 <element name="Q2" library="SparkFun" package="SOT23" value="" x="14.4145" y="6.5405" rot="R90"/>
 <element name="C6" library="SparkFun" package="0603-CAP" value="4.7uF" x="15.621" y="10.3505" rot="R270"/>
 <element name="R6" library="SparkFun" package="0603-RES" value="390k" x="6.35" y="5.4356"/>
 <element name="SP3" library="adafruit" package="PS12" value="SPEAKER/PS12" x="7.874" y="12.7" rot="R270"/>
 <element name="R7" library="SparkFun" package="0603-RES" value="" x="6.35" y="3.7084" rot="R180"/>
 <element name="LED1" library="SparkFun" package="LED-0603" value="" x="3.048" y="4.572"/>
@@ @@ -21531,12 +21539,14 @@ Please make sure your boards conform to @@
 <element name="C9" library="SparkFun" package="PANASONIC_C" value="10uF" x="28.575" y="10.16"/>
 <element name="C2" library="SparkFun" package="PANASONIC_C" value="1000uF" x="21.9075" y="9.8425" rot="R180"/>
 <element name="C10" library="adafruit" package="C150-054X183" value="1uF" x="34.44875" y="10.4775" rot="R270"/>
 <element name="R18" library="SparkFun" package="0603-RES" value="100k" x="5.08" y="17.145"/>
 <element name="D2" library="SparkFun" package="SOD-323" value="" x="15.5575" y="7.3025" rot="R180"/>
 <element name="R5" library="SparkFun" package="0805" value="1.43M" x="33.9725" y="21.9075" rot="R90"/>
 <element name="Q2" library="SparkFun" package="SOT23-3" value="" x="-7.3025" y="-0.9525"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="U$1" pad="GND"/>
 <contactref element="Q2" pad="2"/>
 <contactref element="C6" pad="2"/>
 <contactref element="IC1" pad="2"/>
 <contactref element="C1" pad="2"/>
 <contactref element="C4" pad="2"/>
@@ @@ -21589,6 +21599,8 @@ Please make sure your boards conform to @@
 <via x="2.54" y="18.7325" extent="1-16" drill="0.254"/>
 <via x="2.8575" y="36.5125" extent="1-16" drill="0.254"/>
 <contactref element="C10" pad="2"/>
 <contactref element="D2" pad="2"/>
 <contactref element="LED1" pad="C"/>
 </signal>
 <signal name="VBAT">
 <contactref element="U$2" pad="13"/>
@@ @@ -21674,14 +21686,11 @@ Please make sure your boards conform to @@
 </signal>
 <signal name="VCC">
 <contactref element="R6" pad="2"/>
 <contactref element="R7" pad="1"/>
 <contactref element="SP3" pad="P$2"/>
 <contactref element="IC1" pad="4"/>
 <contactref element="JP4" pad="3"/>
 <wire x1="16.7" y1="2.54" x2="16.7" y2="1.7648" width="0.4064" layer="1"/>
 <wire x1="16.7" y1="1.7648" x2="16.1544" y2="1.2192" width="0.4064" layer="1"/>
 <wire x1="9.6892" y1="1.2192" x2="7.2" y2="3.7084" width="0.4064" layer="1"/>
 <wire x1="7.2" y1="3.7084" x2="7.2" y2="5.4356" width="0.4064" layer="1"/>
 <wire x1="7.2" y1="5.4356" x2="7.2" y2="9.526" width="0.4064" layer="1"/>
 <wire x1="7.2" y1="9.526" x2="7.874" y2="10.2" width="0.4064" layer="1"/>
 <wire x1="12.476" y1="30.8" x2="12.1056" y2="30.8" width="0.4064" layer="1"/>
@@ @@ -21692,6 +21701,7 @@ Please make sure your boards conform to @@
 <wire x1="4.064" y1="23.4696" x2="4.064" y2="14.01" width="0.4064" layer="16"/>
 <wire x1="4.064" y1="14.01" x2="7.874" y2="10.2" width="0.4064" layer="16"/>
 <wire x1="9.6892" y1="1.2192" x2="16.1544" y2="1.2192" width="0.4064" layer="1"/>
 <wire x1="9.6892" y1="1.2192" x2="7.2" y2="5.4356" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="SCL">
 <contactref element="IC1" pad="1"/>
@@ @@ -21713,16 +21723,10 @@ Please make sure your boards conform to @@
 </signal>
 <signal name="PA0">
 <contactref element="R6" pad="1"/>
 <contactref element="Q2" pad="3"/>
 <contactref element="C6" pad="1"/>
 <contactref element="SP3" pad="P$1"/>
 <contactref element="LED1" pad="C"/>
 <contactref element="JP3" pad="3"/>
 <wire x1="3.048" y1="5.322" x2="5.3864" y2="5.322" width="0.4064" layer="1"/>
 <wire x1="5.3864" y1="5.322" x2="5.5" y2="5.4356" width="0.4064" layer="1"/>
 <wire x1="5.5" y1="5.4356" x2="5.5" y2="12.7" width="0.4064" layer="1"/>
 <wire x1="5.5" y1="12.7" x2="5.5" y2="12.826" width="0.4064" layer="1"/>
 <wire x1="5.5" y1="12.826" x2="7.874" y2="15.2" width="0.4064" layer="1"/>
 <wire x1="16.7" y1="36.83" x2="16.7" y2="37.5544" width="0.4064" layer="1"/>
 <wire x1="16.7" y1="37.5544" x2="15.8496" y2="38.4048" width="0.4064" layer="1"/>
 <wire x1="0.8382" y1="17.2593" x2="0.8382" y2="32.495109375" width="0.4064" layer="1"/>
@@ @@ -21730,53 +21734,44 @@ Please make sure your boards conform to @@
 <wire x1="6.747890625" y1="38.4048" x2="15.8496" y2="38.4048" width="0.4064" layer="1"/>
 <wire x1="5.3975" y1="12.7" x2="0.8382" y2="17.2593" width="0.4064" layer="1"/>
 <wire x1="5.3975" y1="12.7" x2="5.5" y2="12.7" width="0.4064" layer="1"/>
 <wire x1="11.176" y1="12.0015" x2="11.1125" y2="12.065" width="0.4064" layer="1"/>
 <via x="11.1125" y="12.065" extent="1-16" drill="0.381"/>
 <wire x1="11.1125" y1="12.065" x2="11.009" y2="12.065" width="0.4064" layer="16"/>
 <wire x1="11.009" y1="12.065" x2="7.874" y2="15.2" width="0.4064" layer="16"/>
 <wire x1="11.2845" y1="8.552" x2="11.2845" y2="11.893" width="0.4064" layer="1"/>
 <wire x1="11.2845" y1="11.893" x2="11.1125" y2="12.065" width="0.4064" layer="1"/>
 <wire x1="15.621" y1="11.2005" x2="15.621" y2="11.3665" width="0.4064" layer="1"/>
 <wire x1="15.621" y1="11.3665" x2="14.9225" y2="12.065" width="0.4064" layer="1"/>
 <wire x1="14.9225" y1="12.065" x2="11.1125" y2="12.065" width="0.4064" layer="1"/>
 <wire x1="11.2845" y1="8.552" x2="11.303" y2="8.552" width="0.4064" layer="1"/>
 <wire x1="11.303" y1="8.552" x2="13.3145" y2="6.5405" width="0.4064" layer="1"/>
 <contactref element="C3" pad="2"/>
 <wire x1="38.735" y1="7.3025" x2="36.5125" y2="5.08" width="0.4064" layer="1"/>
 <wire x1="39.243" y1="7.482" x2="39.0635" y2="7.3025" width="0.4064" layer="1"/>
 <wire x1="39.0635" y1="7.3025" x2="38.735" y2="7.3025" width="0.4064" layer="1"/>
 <wire x1="36.5125" y1="5.08" x2="20.0905" y2="5.08" width="0.4064" layer="1"/>
 <contactref element="D2" pad="1"/>
 <wire x1="16.7075" y1="7.3025" x2="20.0905" y2="5.08" width="0" layer="19" extent="1-1"/>
 <wire x1="5.5" y1="5.4356" x2="16.7075" y2="7.3025" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA1">
 <contactref element="U$2" pad="8"/>
 <contactref element="JP3" pad="4"/>
 <via x="5.5245" y="22.1361" extent="1-16" drill="0.254"/>
 <wire x1="5.5245" y1="22.3901" x2="18.6944" y2="35.56" width="0.4064" layer="16"/>
 <wire x1="18.6944" y1="35.56" x2="18.6944" y2="36.8244" width="0.4064" layer="16"/>
 <wire x1="18.6944" y1="36.8244" x2="18.7" y2="36.83" width="0.4064" layer="16"/>
 <wire x1="8.401" y1="22.378" x2="5.7664" y2="22.378" width="0.4064" layer="1"/>
 <wire x1="5.7664" y1="22.378" x2="5.5245" y2="22.1361" width="0.4064" layer="1"/>
 <wire x1="5.5245" y1="22.1361" x2="5.5245" y2="22.3901" width="0.4064" layer="16"/>
 <contactref element="R18" pad="1"/>
 <wire x1="4.23" y1="17.145" x2="5.5245" y2="22.1361" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA2">
 <contactref element="JP3" pad="5"/>
 <contactref element="SP3" pad="P$1"/>
 <wire x1="7.874" y1="15.2" x2="20.7" y2="36.83" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PA3">
 <contactref element="JP3" pad="6"/>
 <contactref element="R7" pad="1"/>
 <wire x1="7.2" y1="3.7084" x2="22.7" y2="36.83" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="HV">
 <contactref element="R1" pad="1"/>
 <contactref element="D1" pad="C"/>
 <contactref element="C7" pad="1"/>
 <contactref element="R4" pad="1"/>
 <wire x1="35.676" y1="22.606" x2="35.676" y2="24.511" width="0.4064" layer="1"/>
 <wire x1="41.402" y1="11.01" x2="37.4532" y2="11.01" width="0.6096" layer="1"/>
 <wire x1="34.4424" y1="27.9744" x2="34.4424" y2="27.94" width="0.4064" layer="1"/>
 <wire x1="34.41065" y1="27.432" x2="34.41065" y2="24.384" width="0.6096" layer="1"/>
 <wire x1="35.676" y1="24.511" x2="34.53765" y2="24.511" width="0.4064" layer="1"/>
 <wire x1="34.53765" y1="24.511" x2="34.41065" y2="24.384" width="0.4064" layer="1"/>
 <wire x1="34.44875" y1="14.01445" x2="37.4532" y2="11.01" width="0.6096" layer="1"/>
 <contactref element="C10" pad="1"/>
 <wire x1="34.41065" y1="24.384" x2="34.41065" y2="18.0086" width="0.6096" layer="1"/>
 <wire x1="34.41065" y1="18.0086" x2="34.44875" y2="17.9705" width="0.6096" layer="1"/>
 <wire x1="34.44875" y1="17.9705" x2="34.44875" y2="14.01445" width="0.6096" layer="1"/>
 <wire x1="34.44875" y1="14.01445" x2="37.4532" y2="11.01" width="0.6096" layer="1"/>
 <wire x1="34.4424" y1="27.94" x2="34.4424" y2="27.46375" width="0.6096" layer="1"/>
 <wire x1="34.4424" y1="27.46375" x2="34.41065" y2="27.432" width="0.6096" layer="1"/>
 <contactref element="R5" pad="1"/>
 <wire x1="34.44875" y1="14.01445" x2="34.44875" y2="17.9705" width="0.6096" layer="1"/>
 <wire x1="34.44875" y1="17.9705" x2="33.9725" y2="21.0075" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$7">
 <contactref element="U$1" pad="VCC"/>
@@ @@ -21794,24 +21789,6 @@ Please make sure your boards conform to @@
 <wire x1="41.374" y1="9.282" x2="41.402" y2="9.31" width="0.4064" layer="1"/>
 <wire x1="41.402" y1="9.31" x2="41.402" y2="7.2" width="0.6096" layer="1"/>
 </signal>
 <signal name="N$27">
 <contactref element="R5" pad="2"/>
 <contactref element="C3" pad="2"/>
 <wire x1="38.735" y1="7.3025" x2="36.5125" y2="5.08" width="0.4064" layer="1"/>
 <wire x1="18.1475" y1="7.482" x2="17.8715" y2="7.482" width="0.3048" layer="1"/>
 <wire x1="39.243" y1="7.482" x2="39.0635" y2="7.3025" width="0.4064" layer="1"/>
 <wire x1="39.0635" y1="7.3025" x2="38.735" y2="7.3025" width="0.4064" layer="1"/>
 <wire x1="36.5125" y1="5.08" x2="20.0905" y2="5.08" width="0.4064" layer="1"/>
 <wire x1="20.0905" y1="5.08" x2="17.78" y2="7.3905" width="0.4064" layer="1"/>
 <wire x1="17.8715" y1="7.482" x2="17.78" y2="7.482" width="0.4064" layer="1"/>
 <wire x1="17.78" y1="7.482" x2="17.78" y2="7.3905" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$31">
 <contactref element="R5" pad="1"/>
 <contactref element="Q2" pad="1"/>
 <wire x1="15.5145" y1="5.5905" x2="17.68" y2="5.5905" width="0.6096" layer="1"/>
 <wire x1="17.68" y1="5.5905" x2="17.78" y2="5.6905" width="0.6096" layer="1"/>
 </signal>
 <signal name="N$10">
 <contactref element="R7" pad="2"/>
 <contactref element="LED1" pad="A"/>
@@ @@ -22125,6 +22102,25 @@ Please make sure your boards conform to @@
 <wire x1="4.56475" y1="24.55545" x2="4.4958" y2="24.55545" width="0.4064" layer="1"/>
 <wire x1="4.4958" y1="24.55545" x2="4.445" y2="24.60625" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$5">
 <contactref element="U$2" pad="8"/>
 <contactref element="R18" pad="2"/>
 <wire x1="5.93" y1="17.145" x2="8.401" y2="22.378" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="HV_OUT">
 <contactref element="D1" pad="C"/>
 <contactref element="C7" pad="1"/>
 <contactref element="R4" pad="1"/>
 <contactref element="R5" pad="2"/>
 <wire x1="35.676" y1="22.606" x2="35.676" y2="24.511" width="0.4064" layer="1"/>
 <wire x1="34.4424" y1="27.9744" x2="34.4424" y2="27.94" width="0.4064" layer="1"/>
 <wire x1="34.41065" y1="27.432" x2="34.41065" y2="24.384" width="0.6096" layer="1"/>
 <wire x1="35.676" y1="24.511" x2="34.53765" y2="24.511" width="0.4064" layer="1"/>
 <wire x1="34.53765" y1="24.511" x2="34.41065" y2="24.384" width="0.4064" layer="1"/>
 <wire x1="34.4424" y1="27.94" x2="34.4424" y2="27.46375" width="0.6096" layer="1"/>
 <wire x1="34.4424" y1="27.46375" x2="34.41065" y2="27.432" width="0.6096" layer="1"/>
 <wire x1="33.9725" y1="22.8075" x2="34.41065" y2="24.384" width="0" layer="19" extent="1-1"/>
 </signal>
 </signals>
 </board>
 </drawing>

slave-daughter/slave-daughter-gieger3.sch

➞

Show inline comments

@@ @@ -424,20 +424,6 @@ We've spent an enormous amount of time c @@
 <text x="-0.8255" y="1.778" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-0.1905" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="TO-92">
 <description>&lt;b&gt;TO 92&lt;/b&gt;</description>
 <wire x1="-2.0946" y1="-1.651" x2="-0.7863" y2="2.5485" width="0.2032" layer="21" curve="-111.098957" cap="flat"/>
 <wire x1="0.7863" y1="2.5484" x2="2.0945" y2="-1.651" width="0.2032" layer="21" curve="-111.09954" cap="flat"/>
 <wire x1="-2.0945" y1="-1.651" x2="2.0945" y2="-1.651" width="0.2032" layer="21"/>
 <wire x1="-2.6549" y1="-0.254" x2="-2.2537" y2="-0.254" width="0.2032" layer="21"/>
 <wire x1="-0.2863" y1="-0.254" x2="0.2863" y2="-0.254" width="0.2032" layer="21"/>
 <wire x1="2.2537" y1="-0.254" x2="2.6549" y2="-0.254" width="0.2032" layer="21"/>
 <pad name="3" x="1.27" y="0" drill="0.8128" diameter="1.8796"/>
 <pad name="2" x="0" y="1.905" drill="0.8128" diameter="1.8796"/>
 <pad name="1" x="-1.27" y="0" drill="0.8128" diameter="1.8796"/>
 <text x="3.175" y="0.635" size="0.4064" layer="25" ratio="10">&gt;NAME</text>
 <text x="3.175" y="-1.27" size="0.4064" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="CAP-PTH-SMALL">
 <wire x1="1.27" y1="0.635" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="0.7" diameter="1.651"/>
@@ @@ -818,21 +804,6 @@ Commonly used for 1/4W through-hole resi @@
 <vertex x="-3.3681" y="-0.0101" curve="-90.012967"/>
 </polygon>
 </package>
 <package name="SOT23">
 <description>&lt;b&gt;SOT-23&lt;/b&gt;</description>
 <wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.6604" width="0.1524" layer="51"/>
 <wire x1="1.4224" y1="-0.6604" x2="-1.4224" y2="-0.6604" width="0.1524" layer="51"/>
 <wire x1="-1.4224" y1="-0.6604" x2="-1.4224" y2="0.6604" width="0.1524" layer="51"/>
 <wire x1="-1.4224" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="51"/>
 <smd name="3" x="0" y="1.1" dx="1" dy="1.4" layer="1"/>
 <smd name="2" x="0.95" y="-1.1" dx="1" dy="1.4" layer="1"/>
 <smd name="1" x="-0.95" y="-1.1" dx="1" dy="1.4" layer="1"/>
 <text x="-0.889" y="2.032" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-0.1905" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.2286" y1="0.7112" x2="0.2286" y2="1.2954" layer="51"/>
 <rectangle x1="0.7112" y1="-1.2954" x2="1.1684" y2="-0.7112" layer="51"/>
 <rectangle x1="-1.1684" y1="-1.2954" x2="-0.7112" y2="-0.7112" layer="51"/>
 </package>
 <package name="SOT223">
 <description>&lt;b&gt;SOT-223&lt;/b&gt;</description>
 <wire x1="3.2766" y1="1.651" x2="3.2766" y2="-1.651" width="0.2032" layer="21"/>
@@ @@ -854,35 +825,6 @@ Commonly used for 1/4W through-hole resi @@
 <rectangle x1="-2.7432" y1="-3.6576" x2="-1.8796" y2="-1.8034" layer="51"/>
 <rectangle x1="1.8796" y1="-3.6576" x2="2.7432" y2="-1.8034" layer="51"/>
 </package>
 <package name="SOT89">
 <wire x1="2.3" y1="1.3" x2="2.3" y2="-1.3" width="0.2032" layer="21"/>
 <wire x1="2.3" y1="-1.3" x2="-2.3" y2="-1.3" width="0.2032" layer="21"/>
 <wire x1="-2.3" y1="-1.3" x2="-2.3" y2="1.3" width="0.2032" layer="21"/>
 <wire x1="-2.3" y1="1.3" x2="2.3" y2="1.3" width="0.2032" layer="21"/>
 <smd name="1" x="-1.5" y="-1.8" dx="0.58" dy="1.2" layer="1"/>
 <smd name="2" x="0" y="-1.8" dx="0.58" dy="1.2" layer="1"/>
 <smd name="3" x="1.5" y="-1.8" dx="0.58" dy="1.2" layer="1"/>
 <smd name="4" x="0" y="1.3" dx="2" dy="2" layer="1"/>
 <text x="-2.5185" y="-0.9555" size="0.4064" layer="25" rot="R90">&gt;NAME</text>
 <text x="2.9905" y="-1.1295" size="0.4064" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.915" y1="0.3034" x2="0.915" y2="2.1576" layer="51"/>
 <rectangle x1="-1.74" y1="-2.23" x2="-1.26" y2="-1.27" layer="51"/>
 <rectangle x1="-0.24" y1="-2.23" x2="0.24" y2="-1.27" layer="51"/>
 <rectangle x1="1.26" y1="-2.23" x2="1.74" y2="-1.27" layer="51"/>
 </package>
 <package name="TO-92-AMMO">
 <wire x1="-2.0946" y1="-1.651" x2="-0.7863" y2="2.5485" width="0.2032" layer="21" curve="-111.098957" cap="flat"/>
 <wire x1="0.7863" y1="2.5484" x2="2.0945" y2="-1.651" width="0.2032" layer="21" curve="-111.09954" cap="flat"/>
 <wire x1="-2.0945" y1="-1.651" x2="2.0945" y2="-1.651" width="0.2032" layer="21"/>
 <wire x1="-0.635" y1="2.54" x2="0.635" y2="2.54" width="0.2032" layer="21" curve="-25.057615"/>
 <wire x1="0.635" y1="2.54" x2="1.905" y2="1.905" width="0.2032" layer="21" curve="-28.072487"/>
 <wire x1="-1.905" y1="1.905" x2="0.635" y2="2.54" width="0.2032" layer="21" curve="-53.130102"/>
 <pad name="3" x="2.54" y="0" drill="0.8128" diameter="1.8796"/>
 <pad name="2" x="0" y="0" drill="0.8128" diameter="1.8796"/>
 <pad name="1" x="-2.54" y="0" drill="0.8128" diameter="1.8796"/>
 <text x="3.175" y="1.905" size="0.4064" layer="25" ratio="10">&gt;NAME</text>
 <text x="3.175" y="-1.905" size="0.4064" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="LED5MM">
 <description>&lt;B&gt;LED&lt;/B&gt;&lt;p&gt;
 mm, round</description>
@@ @@ -1506,6 +1448,64 @@ Basic small signal diode good up to 200m @@
 <text x="-2.54" y="1.381" size="0.4064" layer="25">&gt;NAME</text>
 <text x="0.408" y="1.332" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="SOT23">
 <description>&lt;b&gt;SOT-23&lt;/b&gt;</description>
 <wire x1="1.4224" y1="0.6604" x2="1.4224" y2="-0.6604" width="0.1524" layer="51"/>
 <wire x1="1.4224" y1="-0.6604" x2="-1.4224" y2="-0.6604" width="0.1524" layer="51"/>
 <wire x1="-1.4224" y1="-0.6604" x2="-1.4224" y2="0.6604" width="0.1524" layer="51"/>
 <wire x1="-1.4224" y1="0.6604" x2="1.4224" y2="0.6604" width="0.1524" layer="51"/>
 <smd name="3" x="0" y="1.1" dx="1" dy="1.4" layer="1"/>
 <smd name="2" x="0.95" y="-1.1" dx="1" dy="1.4" layer="1"/>
 <smd name="1" x="-0.95" y="-1.1" dx="1" dy="1.4" layer="1"/>
 <text x="-0.889" y="2.032" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-0.1905" size="0.4064" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.2286" y1="0.7112" x2="0.2286" y2="1.2954" layer="51"/>
 <rectangle x1="0.7112" y1="-1.2954" x2="1.1684" y2="-0.7112" layer="51"/>
 <rectangle x1="-1.1684" y1="-1.2954" x2="-0.7112" y2="-0.7112" layer="51"/>
 </package>
 <package name="TO-92">
 <description>&lt;b&gt;TO 92&lt;/b&gt;</description>
 <wire x1="-2.0946" y1="-1.651" x2="-0.7863" y2="2.5485" width="0.2032" layer="21" curve="-111.098957" cap="flat"/>
 <wire x1="0.7863" y1="2.5484" x2="2.0945" y2="-1.651" width="0.2032" layer="21" curve="-111.09954" cap="flat"/>
 <wire x1="-2.0945" y1="-1.651" x2="2.0945" y2="-1.651" width="0.2032" layer="21"/>
 <wire x1="-2.6549" y1="-0.254" x2="-2.2537" y2="-0.254" width="0.2032" layer="21"/>
 <wire x1="-0.2863" y1="-0.254" x2="0.2863" y2="-0.254" width="0.2032" layer="21"/>
 <wire x1="2.2537" y1="-0.254" x2="2.6549" y2="-0.254" width="0.2032" layer="21"/>
 <pad name="3" x="1.27" y="0" drill="0.8128" diameter="1.8796"/>
 <pad name="2" x="0" y="1.905" drill="0.8128" diameter="1.8796"/>
 <pad name="1" x="-1.27" y="0" drill="0.8128" diameter="1.8796"/>
 <text x="3.175" y="0.635" size="0.4064" layer="25" ratio="10">&gt;NAME</text>
 <text x="3.175" y="-1.27" size="0.4064" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 <package name="SOT89">
 <wire x1="2.3" y1="1.3" x2="2.3" y2="-1.3" width="0.2032" layer="21"/>
 <wire x1="2.3" y1="-1.3" x2="-2.3" y2="-1.3" width="0.2032" layer="21"/>
 <wire x1="-2.3" y1="-1.3" x2="-2.3" y2="1.3" width="0.2032" layer="21"/>
 <wire x1="-2.3" y1="1.3" x2="2.3" y2="1.3" width="0.2032" layer="21"/>
 <smd name="1" x="-1.5" y="-1.8" dx="0.58" dy="1.2" layer="1"/>
 <smd name="2" x="0" y="-1.8" dx="0.58" dy="1.2" layer="1"/>
 <smd name="3" x="1.5" y="-1.8" dx="0.58" dy="1.2" layer="1"/>
 <smd name="4" x="0" y="1.3" dx="2" dy="2" layer="1"/>
 <text x="-2.5185" y="-0.9555" size="0.4064" layer="25" rot="R90">&gt;NAME</text>
 <text x="2.9905" y="-1.1295" size="0.4064" layer="27" rot="R90">&gt;VALUE</text>
 <rectangle x1="-0.915" y1="0.3034" x2="0.915" y2="2.1576" layer="51"/>
 <rectangle x1="-1.74" y1="-2.23" x2="-1.26" y2="-1.27" layer="51"/>
 <rectangle x1="-0.24" y1="-2.23" x2="0.24" y2="-1.27" layer="51"/>
 <rectangle x1="1.26" y1="-2.23" x2="1.74" y2="-1.27" layer="51"/>
 </package>
 <package name="TO-92-AMMO">
 <wire x1="-2.0946" y1="-1.651" x2="-0.7863" y2="2.5485" width="0.2032" layer="21" curve="-111.098957" cap="flat"/>
 <wire x1="0.7863" y1="2.5484" x2="2.0945" y2="-1.651" width="0.2032" layer="21" curve="-111.09954" cap="flat"/>
 <wire x1="-2.0945" y1="-1.651" x2="2.0945" y2="-1.651" width="0.2032" layer="21"/>
 <wire x1="-0.635" y1="2.54" x2="0.635" y2="2.54" width="0.2032" layer="21" curve="-25.057615"/>
 <wire x1="0.635" y1="2.54" x2="1.905" y2="1.905" width="0.2032" layer="21" curve="-28.072487"/>
 <wire x1="-1.905" y1="1.905" x2="0.635" y2="2.54" width="0.2032" layer="21" curve="-53.130102"/>
 <pad name="3" x="2.54" y="0" drill="0.8128" diameter="1.8796"/>
 <pad name="2" x="0" y="0" drill="0.8128" diameter="1.8796"/>
 <pad name="1" x="-2.54" y="0" drill="0.8128" diameter="1.8796"/>
 <text x="3.175" y="1.905" size="0.4064" layer="25" ratio="10">&gt;NAME</text>
 <text x="3.175" y="-1.905" size="0.4064" layer="27" ratio="10">&gt;VALUE</text>
 </package>
 </packages>
 <symbols>
 <symbol name="LETTER_L">
@@ @@ -1620,24 +1620,6 @@ Basic small signal diode good up to 200m @@
 <pin name="2" x="5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="1" x="-5.08" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
 </symbol>
 <symbol name="NPN">
 <wire x1="2.54" y1="2.54" x2="0.508" y2="1.524" width="0.1524" layer="94"/>
 <wire x1="1.778" y1="-1.524" x2="2.54" y2="-2.54" width="0.1524" layer="94"/>
 <wire x1="2.54" y1="-2.54" x2="1.27" y2="-2.54" width="0.1524" layer="94"/>
 <wire x1="1.27" y1="-2.54" x2="1.778" y2="-1.524" width="0.1524" layer="94"/>
 <wire x1="1.54" y1="-2.04" x2="0.308" y2="-1.424" width="0.1524" layer="94"/>
 <wire x1="1.524" y1="-2.413" x2="2.286" y2="-2.413" width="0.254" layer="94"/>
 <wire x1="2.286" y1="-2.413" x2="1.778" y2="-1.778" width="0.254" layer="94"/>
 <wire x1="1.778" y1="-1.778" x2="1.524" y2="-2.286" width="0.254" layer="94"/>
 <wire x1="1.524" y1="-2.286" x2="1.905" y2="-2.286" width="0.254" layer="94"/>
 <wire x1="1.905" y1="-2.286" x2="1.778" y2="-2.032" width="0.254" layer="94"/>
 <text x="5.08" y="0" size="1.778" layer="95">&gt;NAME</text>
 <text x="5.08" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 <rectangle x1="-0.254" y1="-2.54" x2="0.508" y2="2.54" layer="94"/>
 <pin name="B" x="-2.54" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
 <pin name="E" x="2.54" y="-5.08" visible="off" length="short" direction="pas" swaplevel="3" rot="R90"/>
 <pin name="C" x="2.54" y="5.08" visible="off" length="short" direction="pas" swaplevel="2" rot="R270"/>
 </symbol>
 <symbol name="LED">
 <wire x1="1.27" y1="0" x2="0" y2="-2.54" width="0.254" layer="94"/>
 <wire x1="0" y1="-2.54" x2="-1.27" y2="0" width="0.254" layer="94"/>
@@ @@ -1727,6 +1709,24 @@ Basic small signal diode good up to 200m @@
 <pin name="+" x="0" y="2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
 <pin name="-" x="0" y="-5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
 </symbol>
 <symbol name="NPN">
 <wire x1="2.54" y1="2.54" x2="0.508" y2="1.524" width="0.1524" layer="94"/>
 <wire x1="1.778" y1="-1.524" x2="2.54" y2="-2.54" width="0.1524" layer="94"/>
 <wire x1="2.54" y1="-2.54" x2="1.27" y2="-2.54" width="0.1524" layer="94"/>
 <wire x1="1.27" y1="-2.54" x2="1.778" y2="-1.524" width="0.1524" layer="94"/>
 <wire x1="1.54" y1="-2.04" x2="0.308" y2="-1.424" width="0.1524" layer="94"/>
 <wire x1="1.524" y1="-2.413" x2="2.286" y2="-2.413" width="0.254" layer="94"/>
 <wire x1="2.286" y1="-2.413" x2="1.778" y2="-1.778" width="0.254" layer="94"/>
 <wire x1="1.778" y1="-1.778" x2="1.524" y2="-2.286" width="0.254" layer="94"/>
 <wire x1="1.524" y1="-2.286" x2="1.905" y2="-2.286" width="0.254" layer="94"/>
 <wire x1="1.905" y1="-2.286" x2="1.778" y2="-2.032" width="0.254" layer="94"/>
 <text x="5.08" y="0" size="1.778" layer="95">&gt;NAME</text>
 <text x="5.08" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 <rectangle x1="-0.254" y1="-2.54" x2="0.508" y2="2.54" layer="94"/>
 <pin name="B" x="-2.54" y="0" visible="off" length="short" direction="pas" swaplevel="1"/>
 <pin name="E" x="2.54" y="-5.08" visible="off" length="short" direction="pas" swaplevel="3" rot="R90"/>
 <pin name="C" x="2.54" y="5.08" visible="off" length="short" direction="pas" swaplevel="2" rot="R270"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="FRAME-LETTER" prefix="FRAME">
@@ @@ -2133,75 +2133,6 @@ Basic schematic elements and footprints @@
 </device>
 </devices>
 </deviceset>
 <deviceset name="TRANSISTOR_NPN" prefix="Q" uservalue="yes">
 <description>&lt;b&gt;Transistor NPN&lt;/b&gt;
 BJT configuration in SOT23 package. MMBT2222 is the common NPN we use. Double check BCE configuration again layout.</description>
 <gates>
 <gate name="G$1" symbol="NPN" x="0" y="0"/>
 </gates>
 <devices>
 <device name="SOT23" package="SOT23">
 <connects>
 <connect gate="G$1" pin="B" pad="1"/>
 <connect gate="G$1" pin="C" pad="3"/>
 <connect gate="G$1" pin="E" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SOT23-3" package="SOT23-3">
 <connects>
 <connect gate="G$1" pin="B" pad="1"/>
 <connect gate="G$1" pin="C" pad="3"/>
 <connect gate="G$1" pin="E" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="TO92" package="TO-92">
 <connects>
 <connect gate="G$1" pin="B" pad="2"/>
 <connect gate="G$1" pin="C" pad="3"/>
 <connect gate="G$1" pin="E" pad="1"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="&quot;" package="SOT223">
 <connects>
 <connect gate="G$1" pin="B" pad="1"/>
 <connect gate="G$1" pin="C" pad="2"/>
 <connect gate="G$1" pin="E" pad="3"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SOT89" package="SOT89">
 <connects>
 <connect gate="G$1" pin="B" pad="1"/>
 <connect gate="G$1" pin="C" pad="2"/>
 <connect gate="G$1" pin="E" pad="3"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="TO-92-AMMO" package="TO-92-AMMO">
 <connects>
 <connect gate="G$1" pin="B" pad="2"/>
 <connect gate="G$1" pin="C" pad="3"/>
 <connect gate="G$1" pin="E" pad="1"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="LED" prefix="LED" uservalue="yes">
 <description>&lt;b&gt;LEDs&lt;/b&gt;
 Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others)</description>
@@ @@ -2561,6 +2492,75 @@ These are standard SMD and PTH capacitor @@
 </device>
 </devices>
 </deviceset>
 <deviceset name="TRANSISTOR_NPN" prefix="Q" uservalue="yes">
 <description>&lt;b&gt;Transistor NPN&lt;/b&gt;
 BJT configuration in SOT23 package. MMBT2222 is the common NPN we use. Double check BCE configuration again layout.</description>
 <gates>
 <gate name="G$1" symbol="NPN" x="0" y="0"/>
 </gates>
 <devices>
 <device name="SOT23" package="SOT23">
 <connects>
 <connect gate="G$1" pin="B" pad="1"/>
 <connect gate="G$1" pin="C" pad="3"/>
 <connect gate="G$1" pin="E" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SOT23-3" package="SOT23-3">
 <connects>
 <connect gate="G$1" pin="B" pad="1"/>
 <connect gate="G$1" pin="C" pad="3"/>
 <connect gate="G$1" pin="E" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="TO92" package="TO-92">
 <connects>
 <connect gate="G$1" pin="B" pad="2"/>
 <connect gate="G$1" pin="C" pad="3"/>
 <connect gate="G$1" pin="E" pad="1"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="&quot;" package="SOT223">
 <connects>
 <connect gate="G$1" pin="B" pad="1"/>
 <connect gate="G$1" pin="C" pad="2"/>
 <connect gate="G$1" pin="E" pad="3"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="SOT89" package="SOT89">
 <connects>
 <connect gate="G$1" pin="B" pad="1"/>
 <connect gate="G$1" pin="C" pad="2"/>
 <connect gate="G$1" pin="E" pad="3"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="TO-92-AMMO" package="TO-92-AMMO">
 <connects>
 <connect gate="G$1" pin="B" pad="2"/>
 <connect gate="G$1" pin="C" pad="3"/>
 <connect gate="G$1" pin="E" pad="1"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="adafruit">
@@ @@ -5338,16 +5338,10 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <part name="R2" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="10M"/>
 <part name="GND4" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND5" library="SparkFun" deviceset="GND" device=""/>
 <part name="R5" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="1K"/>
 <part name="R6" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="1.8K"/>
 <part name="Q2" library="SparkFun" deviceset="TRANSISTOR_NPN" device="SOT23"/>
 <part name="C6" library="SparkFun" deviceset="CAP" device="0603-CAP" value="4.7uF"/>
 <part name="R6" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="390k"/>
 <part name="P+3" library="SparkFun" deviceset="VCC" device=""/>
 <part name="GND7" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND8" library="SparkFun" deviceset="GND" device=""/>
 <part name="SP3" library="adafruit" deviceset="SPEAKER" device="/PS12"/>
 <part name="P+5" library="SparkFun" deviceset="VCC" device=""/>
 <part name="P+6" library="SparkFun" deviceset="VCC" device=""/>
 <part name="R7" library="SparkFun" deviceset="RESISTOR" device="0603-RES"/>
 <part name="LED1" library="SparkFun" deviceset="LED" device="0603"/>
 <part name="IC1" library="microchip" deviceset="24*00" device="OT" technology="LC"/>
@@ @@ -5391,6 +5385,12 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <part name="GND15" library="SparkFun" deviceset="GND" device=""/>
 <part name="C10" library="adafruit" deviceset="C-US" device="150-054X183" value="1uF"/>
 <part name="GND17" library="SparkFun" deviceset="GND" device=""/>
 <part name="R18" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="100k"/>
 <part name="D2" library="SparkFun" deviceset="DIODE" device="SOD"/>
 <part name="GND7" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND8" library="SparkFun" deviceset="GND" device=""/>
 <part name="R5" library="SparkFun" deviceset="RESISTOR" device="0805-RES" value="1.43M"/>
 <part name="Q2" library="SparkFun" deviceset="TRANSISTOR_NPN" device="SOT23-3"/>
 </parts>
 <sheets>
 <sheet>
@@ @@ -5399,19 +5399,19 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <wire x1="60.96" y1="185.42" x2="60.96" y2="101.6" width="0.4064" layer="94"/>
 <wire x1="60.96" y1="101.6" x2="0" y2="101.6" width="0.4064" layer="94"/>
 <text x="12.7" y="175.26" size="6.4516" layer="94">Headers</text>
-<text x="127" y="91.44" size="6.4516" layer="94">HV Boost</text>
+<text x="137.16" y="88.9" size="6.4516" layer="94">HV Boost</text>
 <wire x1="60.96" y1="101.6" x2="195.58" y2="101.6" width="0.4064" layer="94"/>
 <text x="68.58" y="175.26" size="6.4516" layer="94">Gieger Tube and Detection</text>
-<text x="137.16" y="127" size="1.778" layer="91">PING</text>
+<text x="111.76" y="127" size="1.778" layer="91">PING</text>
 <text x="33.02" y="114.3" size="1.778" layer="91">PING</text>
 <wire x1="195.58" y1="101.6" x2="246.38" y2="101.6" width="0.4064" layer="94"/>
 <wire x1="195.58" y1="101.6" x2="195.58" y2="149.86" width="0.4064" layer="94"/>
 <wire x1="195.58" y1="149.86" x2="248.92" y2="149.86" width="0.4064" layer="94"/>
 <text x="203.2" y="139.7" size="6.4516" layer="94">EEPROM</text>
 <text x="33.02" y="116.84" size="1.778" layer="91">CHARGE</text>
 <text x="83.82" y="50.8" size="1.778" layer="91">Use Logic Level Fet</text>
 <text x="111.76" y="86.36" size="1.778" layer="91">Add electrolytics to both sides of inductor as per datasheet</text>
 <text x="83.82" y="48.26" size="1.778" layer="91">NDT3055L</text>
 <text x="93.98" y="48.26" size="1.778" layer="91">Use Logic Level Fet</text>
 <text x="121.92" y="83.82" size="1.778" layer="91">Add electrolytics to both sides of inductor as per datasheet</text>
 <text x="93.98" y="45.72" size="1.778" layer="91">NDT3055L</text>
 </plain>
 <instances>
 <instance part="FRAME1" gate="G$1" x="0" y="0"/>
@@ @@ -5422,81 +5422,84 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <instance part="R1" gate="G$1" x="86.36" y="160.02"/>
 <instance part="R2" gate="G$1" x="106.68" y="160.02"/>
 <instance part="GND4" gate="1" x="106.68" y="170.18" rot="R180"/>
 <instance part="GND5" gate="1" x="43.18" y="12.7"/>
 <instance part="R5" gate="G$1" x="96.52" y="129.54" rot="R90"/>
 <instance part="R6" gate="G$1" x="119.38" y="137.16" rot="R90"/>
 <instance part="Q2" gate="G$1" x="116.84" y="119.38"/>
 <instance part="C6" gate="G$1" x="129.54" y="121.92"/>
 <instance part="P+3" gate="1" x="119.38" y="144.78"/>
 <instance part="GND7" gate="1" x="119.38" y="106.68"/>
 <instance part="GND8" gate="1" x="129.54" y="106.68"/>
 <instance part="SP3" gate="S1" x="160.02" y="142.24" rot="R90"/>
 <instance part="P+5" gate="1" x="160.02" y="154.94"/>
 <instance part="P+6" gate="1" x="170.18" y="154.94"/>
 <instance part="R7" gate="G$1" x="170.18" y="147.32" rot="R270"/>
 <instance part="LED1" gate="G$1" x="170.18" y="137.16"/>
 <instance part="GND5" gate="1" x="53.34" y="10.16"/>
 <instance part="R6" gate="G$1" x="109.22" y="137.16" rot="R90"/>
 <instance part="P+3" gate="1" x="109.22" y="144.78"/>
 <instance part="SP3" gate="S1" x="152.4" y="137.16" rot="R90"/>
 <instance part="P+5" gate="1" x="152.4" y="149.86"/>
 <instance part="R7" gate="G$1" x="165.1" y="142.24" rot="R270"/>
 <instance part="LED1" gate="G$1" x="165.1" y="132.08"/>
 <instance part="IC1" gate="G$1" x="218.44" y="121.92"/>
 <instance part="P+7" gate="1" x="236.22" y="132.08"/>
 <instance part="GND10" gate="1" x="236.22" y="109.22"/>
 <instance part="U$2" gate="G$1" x="45.72" y="50.8"/>
 <instance part="R13" gate="G$1" x="78.74" y="43.18" rot="R270"/>
 <instance part="R15" gate="G$1" x="71.12" y="63.5" smashed="yes">
 <attribute name="NAME" x="69.85" y="64.9986" size="1.778" layer="95"/>
 <attribute name="VALUE" x="69.85" y="60.198" size="1.778" layer="96"/>
 <instance part="U$2" gate="G$1" x="55.88" y="48.26"/>
 <instance part="R13" gate="G$1" x="88.9" y="40.64" rot="R270"/>
 <instance part="R15" gate="G$1" x="81.28" y="60.96" smashed="yes">
 <attribute name="NAME" x="80.01" y="62.4586" size="1.778" layer="95"/>
 <attribute name="VALUE" x="80.01" y="57.658" size="1.778" layer="96"/>
 </instance>
 <instance part="R16" gate="G$1" x="48.26" y="86.36" rot="R270"/>
 <instance part="C1" gate="G$1" x="71.12" y="25.4"/>
 <instance part="GND2" gate="1" x="71.12" y="15.24"/>
 <instance part="GND3" gate="1" x="124.46" y="15.24"/>
 <instance part="C4" gate="G$1" x="60.96" y="86.36"/>
 <instance part="GND6" gate="1" x="60.96" y="78.74"/>
 <instance part="R16" gate="G$1" x="58.42" y="83.82" rot="R270"/>
 <instance part="C1" gate="G$1" x="81.28" y="22.86"/>
 <instance part="GND2" gate="1" x="81.28" y="12.7"/>
 <instance part="GND3" gate="1" x="124.46" y="12.7"/>
 <instance part="C4" gate="G$1" x="71.12" y="83.82"/>
 <instance part="GND6" gate="1" x="71.12" y="76.2"/>
 <instance part="JP3" gate="G$1" x="10.16" y="127"/>
 <instance part="JP4" gate="G$1" x="10.16" y="162.56"/>
 <instance part="GND9" gate="1" x="83.82" y="35.56"/>
 <instance part="GND11" gate="1" x="93.98" y="58.42"/>
 <instance part="D1" gate="G$1" x="96.52" y="73.66"/>
 <instance part="C5" gate="G$1" x="71.12" y="86.36"/>
 <instance part="R3" gate="G$1" x="71.12" y="76.2" rot="R270"/>
 <instance part="GND13" gate="1" x="68.58" y="55.88"/>
 <instance part="GND14" gate="1" x="111.76" y="58.42"/>
 <instance part="U$10" gate="G$1" x="86.36" y="71.12"/>
 <instance part="Q1" gate="G$1" x="78.74" y="53.34"/>
 <instance part="C7" gate="G$1" x="111.76" y="66.04"/>
 <instance part="R4" gate="G$1" x="124.46" y="40.64" rot="R270"/>
 <instance part="R8" gate="G$1" x="124.46" y="25.4" rot="R270"/>
 <instance part="GND9" gate="1" x="93.98" y="33.02"/>
 <instance part="GND11" gate="1" x="104.14" y="55.88"/>
 <instance part="D1" gate="G$1" x="106.68" y="71.12"/>
 <instance part="C5" gate="G$1" x="81.28" y="83.82"/>
 <instance part="R3" gate="G$1" x="81.28" y="73.66" rot="R270"/>
 <instance part="GND13" gate="1" x="78.74" y="53.34"/>
 <instance part="GND14" gate="1" x="132.08" y="53.34"/>
 <instance part="U$10" gate="G$1" x="96.52" y="68.58"/>
 <instance part="Q1" gate="G$1" x="88.9" y="50.8"/>
 <instance part="C7" gate="G$1" x="132.08" y="60.96"/>
 <instance part="R4" gate="G$1" x="124.46" y="38.1" rot="R270"/>
 <instance part="R8" gate="G$1" x="124.46" y="22.86" rot="R270"/>
 <instance part="C3" gate="G$1" x="96.52" y="152.4"/>
 <instance part="R9" gate="G$1" x="20.32" y="48.26" smashed="yes">
 <attribute name="NAME" x="19.05" y="49.7586" size="1.778" layer="95"/>
 <attribute name="VALUE" x="22.606" y="49.784" size="1.778" layer="96"/>
 <instance part="R9" gate="G$1" x="27.94" y="45.72" smashed="yes">
 <attribute name="NAME" x="26.67" y="47.2186" size="1.778" layer="95"/>
 <attribute name="VALUE" x="30.226" y="47.244" size="1.778" layer="96"/>
 </instance>
 <instance part="R10" gate="G$1" x="20.32" y="38.1" smashed="yes">
 <attribute name="NAME" x="19.05" y="39.5986" size="1.778" layer="95"/>
 <attribute name="VALUE" x="24.638" y="39.624" size="1.778" layer="96"/>
 <instance part="R10" gate="G$1" x="27.94" y="35.56" smashed="yes">
 <attribute name="NAME" x="26.67" y="37.0586" size="1.778" layer="95"/>
 <attribute name="VALUE" x="32.258" y="37.084" size="1.778" layer="96"/>
 </instance>
 <instance part="R11" gate="G$1" x="27.94" y="40.64" smashed="yes">
 <attribute name="NAME" x="26.67" y="42.1386" size="1.778" layer="95"/>
 <attribute name="VALUE" x="31.75" y="42.164" size="1.778" layer="96"/>
 </instance>
 <instance part="R11" gate="G$1" x="20.32" y="43.18" smashed="yes">
 <attribute name="NAME" x="19.05" y="44.6786" size="1.778" layer="95"/>
 <attribute name="VALUE" x="24.13" y="44.704" size="1.778" layer="96"/>
 <instance part="R14" gate="G$1" x="27.94" y="30.48" smashed="yes">
 <attribute name="NAME" x="26.67" y="31.9786" size="1.778" layer="95"/>
 <attribute name="VALUE" x="31.75" y="32.004" size="1.778" layer="96"/>
 </instance>
 <instance part="R14" gate="G$1" x="20.32" y="33.02" smashed="yes">
 <attribute name="NAME" x="19.05" y="34.5186" size="1.778" layer="95"/>
 <attribute name="VALUE" x="24.13" y="34.544" size="1.778" layer="96"/>
 <instance part="R12" gate="G$1" x="27.94" y="50.8" smashed="yes">
 <attribute name="NAME" x="26.67" y="52.2986" size="1.778" layer="95"/>
 <attribute name="VALUE" x="32.258" y="52.324" size="1.778" layer="96"/>
 </instance>
 <instance part="R12" gate="G$1" x="20.32" y="53.34" smashed="yes">
 <attribute name="NAME" x="19.05" y="54.8386" size="1.778" layer="95"/>
 <attribute name="VALUE" x="24.638" y="54.864" size="1.778" layer="96"/>
 <instance part="R17" gate="G$1" x="27.94" y="55.88" smashed="yes">
 <attribute name="NAME" x="26.67" y="57.3786" size="1.778" layer="95"/>
 <attribute name="VALUE" x="32.258" y="57.404" size="1.778" layer="96"/>
 </instance>
 <instance part="R17" gate="G$1" x="20.32" y="58.42" smashed="yes">
 <attribute name="NAME" x="19.05" y="59.9186" size="1.778" layer="95"/>
 <attribute name="VALUE" x="24.638" y="59.944" size="1.778" layer="96"/>
 <instance part="C8" gate="G$1" x="96.52" y="88.9"/>
 <instance part="C9" gate="G$1" x="106.68" y="88.9"/>
 <instance part="GND12" gate="1" x="96.52" y="78.74"/>
 <instance part="GND16" gate="1" x="106.68" y="78.74"/>
 <instance part="C2" gate="G$1" x="27.94" y="88.9"/>
 <instance part="GND15" gate="1" x="27.94" y="78.74"/>
 <instance part="C10" gate="G$1" x="152.4" y="63.5"/>
 <instance part="GND17" gate="1" x="152.4" y="53.34"/>
 <instance part="R18" gate="G$1" x="30.48" y="71.12" smashed="yes">
 <attribute name="NAME" x="29.21" y="72.6186" size="1.778" layer="95"/>
 <attribute name="VALUE" x="34.798" y="72.644" size="1.778" layer="96"/>
 </instance>
 <instance part="C8" gate="G$1" x="86.36" y="91.44"/>
 <instance part="C9" gate="G$1" x="96.52" y="91.44"/>
 <instance part="GND12" gate="1" x="86.36" y="81.28"/>
 <instance part="GND16" gate="1" x="96.52" y="81.28"/>
 <instance part="C2" gate="G$1" x="17.78" y="91.44"/>
 <instance part="GND15" gate="1" x="17.78" y="81.28"/>
 <instance part="C10" gate="G$1" x="134.62" y="66.04"/>
 <instance part="GND17" gate="1" x="134.62" y="55.88"/>
 <instance part="D2" gate="G$1" x="109.22" y="121.92" rot="R90"/>
 <instance part="GND7" gate="1" x="109.22" y="111.76"/>
 <instance part="GND8" gate="1" x="165.1" y="119.38"/>
 <instance part="R5" gate="G$1" x="142.24" y="71.12" rot="R180"/>
 <instance part="Q2" gate="G$1" x="137.16" y="119.38"/>
 </instances>
 <busses>
 </busses>
@@ @@ -5516,16 +5519,6 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <wire x1="106.68" y1="165.1" x2="116.84" y2="165.1" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="Q2" gate="G$1" pin="E"/>
 <pinref part="GND7" gate="1" pin="GND"/>
 <wire x1="119.38" y1="114.3" x2="119.38" y2="109.22" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C6" gate="G$1" pin="2"/>
 <pinref part="GND8" gate="1" pin="GND"/>
 <wire x1="129.54" y1="119.38" x2="129.54" y2="109.22" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="IC1" gate="G$1" pin="GND"/>
 <wire x1="233.68" y1="116.84" x2="236.22" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="236.22" y1="116.84" x2="236.22" y2="111.76" width="0.1524" layer="91"/>
@@ @@ -5533,73 +5526,83 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 </segment>
 <segment>
 <pinref part="C1" gate="G$1" pin="2"/>
-<wire x1="71.12" y1="22.86" x2="71.12" y2="17.78" width="0.1524" layer="91"/>
+<wire x1="81.28" y1="20.32" x2="81.28" y2="15.24" width="0.1524" layer="91"/>
 <pinref part="GND2" gate="1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="GND3" gate="1" pin="GND"/>
-<wire x1="124.46" y1="17.78" x2="124.46" y2="20.32" width="0.1524" layer="91"/>
+<wire x1="124.46" y1="15.24" x2="124.46" y2="17.78" width="0.1524" layer="91"/>
 <pinref part="R8" gate="G$1" pin="2"/>
 </segment>
 <segment>
 <pinref part="C4" gate="G$1" pin="2"/>
-<wire x1="60.96" y1="83.82" x2="60.96" y2="81.28" width="0.1524" layer="91"/>
+<wire x1="71.12" y1="81.28" x2="71.12" y2="78.74" width="0.1524" layer="91"/>
 <pinref part="GND6" gate="1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="CSN"/>
 <pinref part="R13" gate="G$1" pin="2"/>
-<wire x1="63.5" y1="38.1" x2="78.74" y2="38.1" width="0.1524" layer="91"/>
+<wire x1="73.66" y1="35.56" x2="88.9" y2="35.56" width="0.1524" layer="91"/>
 <pinref part="GND9" gate="1" pin="GND"/>
 <wire x1="83.82" y1="38.1" x2="78.74" y2="38.1" width="0.1524" layer="91"/>
 <junction x="78.74" y="38.1"/>
 <wire x1="93.98" y1="35.56" x2="88.9" y2="35.56" width="0.1524" layer="91"/>
 <junction x="88.9" y="35.56"/>
 </segment>
 <segment>
 <pinref part="GND11" gate="1" pin="GND"/>
 <wire x1="93.98" y1="60.96" x2="93.98" y2="65.278" width="0.1524" layer="91"/>
 <wire x1="93.98" y1="65.278" x2="90.424" y2="65.278" width="0.1524" layer="91"/>
 <wire x1="104.14" y1="58.42" x2="104.14" y2="62.738" width="0.1524" layer="91"/>
 <wire x1="104.14" y1="62.738" x2="100.584" y2="62.738" width="0.1524" layer="91"/>
 <pinref part="U$10" gate="G$1" pin="S_2"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="GND"/>
-<wire x1="40.64" y1="20.32" x2="40.64" y2="17.78" width="0.1524" layer="91"/>
+<wire x1="50.8" y1="17.78" x2="50.8" y2="15.24" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="RBG"/>
 <wire x1="40.64" y1="17.78" x2="43.18" y2="17.78" width="0.1524" layer="91"/>
 <wire x1="43.18" y1="17.78" x2="48.26" y2="17.78" width="0.1524" layer="91"/>
 <wire x1="48.26" y1="17.78" x2="48.26" y2="20.32" width="0.1524" layer="91"/>
 <wire x1="50.8" y1="15.24" x2="53.34" y2="15.24" width="0.1524" layer="91"/>
 <wire x1="53.34" y1="15.24" x2="58.42" y2="15.24" width="0.1524" layer="91"/>
 <wire x1="58.42" y1="15.24" x2="58.42" y2="17.78" width="0.1524" layer="91"/>
 <pinref part="GND5" gate="1" pin="GND"/>
 <wire x1="43.18" y1="15.24" x2="43.18" y2="17.78" width="0.1524" layer="91"/>
 <junction x="43.18" y="17.78"/>
 <wire x1="53.34" y1="12.7" x2="53.34" y2="15.24" width="0.1524" layer="91"/>
 <junction x="53.34" y="15.24"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="RV_OUT"/>
-<wire x1="68.58" y1="58.42" x2="63.5" y2="58.42" width="0.1524" layer="91"/>
+<wire x1="78.74" y1="55.88" x2="73.66" y2="55.88" width="0.1524" layer="91"/>
 <pinref part="GND13" gate="1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="GND14" gate="1" pin="GND"/>
 <wire x1="111.76" y1="60.96" x2="111.76" y2="63.5" width="0.1524" layer="91"/>
 <pinref part="C7" gate="G$1" pin="2"/>
 <wire x1="132.08" y1="58.42" x2="132.08" y2="55.88" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C8" gate="G$1" pin="-"/>
 <pinref part="GND12" gate="1" pin="GND"/>
-<wire x1="86.36" y1="86.36" x2="86.36" y2="83.82" width="0.1524" layer="91"/>
+<wire x1="96.52" y1="83.82" x2="96.52" y2="81.28" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C9" gate="G$1" pin="-"/>
 <pinref part="GND16" gate="1" pin="GND"/>
-<wire x1="96.52" y1="86.36" x2="96.52" y2="83.82" width="0.1524" layer="91"/>
+<wire x1="106.68" y1="83.82" x2="106.68" y2="81.28" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C2" gate="G$1" pin="-"/>
 <pinref part="GND15" gate="1" pin="GND"/>
-<wire x1="17.78" y1="83.82" x2="17.78" y2="86.36" width="0.1524" layer="91"/>
+<wire x1="27.94" y1="81.28" x2="27.94" y2="83.82" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C10" gate="G$1" pin="2"/>
 <pinref part="GND17" gate="1" pin="GND"/>
 <wire x1="134.62" y1="60.96" x2="134.62" y2="58.42" width="0.1524" layer="91"/>
 <wire x1="152.4" y1="58.42" x2="152.4" y2="55.88" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="D2" gate="G$1" pin="A"/>
 <wire x1="109.22" y1="119.38" x2="109.22" y2="114.3" width="0.1524" layer="91"/>
 <pinref part="GND7" gate="1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="LED1" gate="G$1" pin="C"/>
 <wire x1="165.1" y1="127" x2="165.1" y2="121.92" width="0.1524" layer="91"/>
 <pinref part="GND8" gate="1" pin="GND"/>
 </segment>
 </net>
 <net name="VBAT" class="0">
@@ @@ -5609,74 +5612,74 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <pinref part="JP4" gate="G$1" pin="2"/>
 </segment>
 <segment>
 <wire x1="2.54" y1="96.52" x2="12.7" y2="96.52" width="0.1524" layer="91"/>
 <label x="2.54" y="96.52" size="1.778" layer="95"/>
 <wire x1="5.08" y1="93.98" x2="12.7" y2="93.98" width="0.1524" layer="91"/>
 <label x="5.08" y="93.98" size="1.778" layer="95"/>
 <pinref part="U$2" gate="G$1" pin="VCC"/>
 <wire x1="27.94" y1="63.5" x2="22.86" y2="63.5" width="0.1524" layer="91"/>
 <wire x1="22.86" y1="63.5" x2="12.7" y2="63.5" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="63.5" x2="12.7" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="38.1" y1="60.96" x2="33.02" y2="60.96" width="0.1524" layer="91"/>
 <wire x1="33.02" y1="60.96" x2="12.7" y2="60.96" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="60.96" x2="12.7" y2="93.98" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="CLAMP"/>
 <wire x1="27.94" y1="68.58" x2="22.86" y2="68.58" width="0.1524" layer="91"/>
 <wire x1="22.86" y1="68.58" x2="22.86" y2="63.5" width="0.1524" layer="91"/>
 <junction x="22.86" y="63.5"/>
 <wire x1="12.7" y1="38.1" x2="12.7" y2="43.18" width="0.1524" layer="91"/>
 <junction x="12.7" y="63.5"/>
 <wire x1="12.7" y1="43.18" x2="12.7" y2="48.26" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="48.26" x2="12.7" y2="53.34" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="53.34" x2="12.7" y2="58.42" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="58.42" x2="12.7" y2="63.5" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="96.52" x2="17.78" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="38.1" y1="66.04" x2="33.02" y2="66.04" width="0.1524" layer="91"/>
 <wire x1="33.02" y1="66.04" x2="33.02" y2="60.96" width="0.1524" layer="91"/>
 <junction x="33.02" y="60.96"/>
 <wire x1="12.7" y1="35.56" x2="12.7" y2="40.64" width="0.1524" layer="91"/>
 <junction x="12.7" y="60.96"/>
 <wire x1="12.7" y1="40.64" x2="12.7" y2="45.72" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="45.72" x2="12.7" y2="50.8" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="50.8" x2="12.7" y2="55.88" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="55.88" x2="12.7" y2="60.96" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="93.98" x2="27.94" y2="93.98" width="0.1524" layer="91"/>
 <pinref part="R16" gate="G$1" pin="1"/>
 <wire x1="17.78" y1="96.52" x2="48.26" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="48.26" y1="91.44" x2="48.26" y2="96.52" width="0.1524" layer="91"/>
 <junction x="48.26" y="96.52"/>
 <wire x1="48.26" y1="96.52" x2="60.96" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="60.96" y1="96.52" x2="71.12" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="71.12" y1="96.52" x2="78.74" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="78.74" y1="96.52" x2="78.74" y2="73.66" width="0.1524" layer="91"/>
 <wire x1="78.74" y1="73.66" x2="82.296" y2="73.66" width="0.1524" layer="91"/>
 <junction x="60.96" y="96.52"/>
 <wire x1="27.94" y1="93.98" x2="58.42" y2="93.98" width="0.1524" layer="91"/>
 <wire x1="58.42" y1="88.9" x2="58.42" y2="93.98" width="0.1524" layer="91"/>
 <junction x="58.42" y="93.98"/>
 <wire x1="58.42" y1="93.98" x2="71.12" y2="93.98" width="0.1524" layer="91"/>
 <wire x1="71.12" y1="93.98" x2="81.28" y2="93.98" width="0.1524" layer="91"/>
 <wire x1="81.28" y1="93.98" x2="88.9" y2="93.98" width="0.1524" layer="91"/>
 <wire x1="88.9" y1="93.98" x2="88.9" y2="71.12" width="0.1524" layer="91"/>
 <wire x1="88.9" y1="71.12" x2="92.456" y2="71.12" width="0.1524" layer="91"/>
 <junction x="71.12" y="93.98"/>
 <pinref part="C4" gate="G$1" pin="1"/>
-<wire x1="60.96" y1="91.44" x2="60.96" y2="96.52" width="0.1524" layer="91"/>
+<wire x1="71.12" y1="88.9" x2="71.12" y2="93.98" width="0.1524" layer="91"/>
 <pinref part="C5" gate="G$1" pin="1"/>
 <wire x1="71.12" y1="91.44" x2="71.12" y2="96.52" width="0.1524" layer="91"/>
 <junction x="71.12" y="96.52"/>
 <wire x1="81.28" y1="88.9" x2="81.28" y2="93.98" width="0.1524" layer="91"/>
 <junction x="81.28" y="93.98"/>
 <pinref part="U$10" gate="G$1" pin="P_2"/>
-<junction x="12.7" y="96.52"/>
+<junction x="12.7" y="93.98"/>
 <pinref part="R9" gate="G$1" pin="1"/>
-<wire x1="15.24" y1="48.26" x2="12.7" y2="48.26" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="45.72" x2="12.7" y2="45.72" width="0.1524" layer="91"/>
 <pinref part="R10" gate="G$1" pin="1"/>
 <wire x1="15.24" y1="38.1" x2="12.7" y2="38.1" width="0.1524" layer="91"/>
 <junction x="12.7" y="48.26"/>
 <wire x1="22.86" y1="35.56" x2="12.7" y2="35.56" width="0.1524" layer="91"/>
 <junction x="12.7" y="45.72"/>
 <pinref part="R17" gate="G$1" pin="1"/>
-<wire x1="12.7" y1="58.42" x2="15.24" y2="58.42" width="0.1524" layer="91"/>
+<wire x1="12.7" y1="55.88" x2="22.86" y2="55.88" width="0.1524" layer="91"/>
 <pinref part="R12" gate="G$1" pin="1"/>
 <wire x1="12.7" y1="53.34" x2="15.24" y2="53.34" width="0.1524" layer="91"/>
 <junction x="12.7" y="58.42"/>
 <junction x="12.7" y="53.34"/>
 <wire x1="12.7" y1="50.8" x2="22.86" y2="50.8" width="0.1524" layer="91"/>
 <junction x="12.7" y="55.88"/>
 <junction x="12.7" y="50.8"/>
 <pinref part="R11" gate="G$1" pin="1"/>
-<wire x1="15.24" y1="43.18" x2="12.7" y2="43.18" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="40.64" x2="12.7" y2="40.64" width="0.1524" layer="91"/>
 <pinref part="R14" gate="G$1" pin="1"/>
 <wire x1="15.24" y1="33.02" x2="12.7" y2="33.02" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="33.02" x2="12.7" y2="38.1" width="0.1524" layer="91"/>
 <junction x="12.7" y="43.18"/>
 <junction x="12.7" y="38.1"/>
 <wire x1="22.86" y1="30.48" x2="12.7" y2="30.48" width="0.1524" layer="91"/>
 <wire x1="12.7" y1="30.48" x2="12.7" y2="35.56" width="0.1524" layer="91"/>
 <junction x="12.7" y="40.64"/>
 <junction x="12.7" y="35.56"/>
 <pinref part="C8" gate="G$1" pin="+"/>
 <wire x1="78.74" y1="96.52" x2="86.36" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="86.36" y1="96.52" x2="86.36" y2="93.98" width="0.1524" layer="91"/>
 <wire x1="88.9" y1="93.98" x2="96.52" y2="93.98" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="93.98" x2="96.52" y2="91.44" width="0.1524" layer="91"/>
 <pinref part="C9" gate="G$1" pin="+"/>
 <wire x1="86.36" y1="96.52" x2="96.52" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="96.52" x2="96.52" y2="93.98" width="0.1524" layer="91"/>
 <junction x="86.36" y="96.52"/>
 <junction x="78.74" y="96.52"/>
 <wire x1="96.52" y1="93.98" x2="106.68" y2="93.98" width="0.1524" layer="91"/>
 <wire x1="106.68" y1="93.98" x2="106.68" y2="91.44" width="0.1524" layer="91"/>
 <junction x="96.52" y="93.98"/>
 <junction x="88.9" y="93.98"/>
 <pinref part="C2" gate="G$1" pin="+"/>
 <wire x1="17.78" y1="93.98" x2="17.78" y2="96.52" width="0.1524" layer="91"/>
 <junction x="17.78" y="96.52"/>
 <wire x1="27.94" y1="91.44" x2="27.94" y2="93.98" width="0.1524" layer="91"/>
 <junction x="27.94" y="93.98"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="LVGATE"/>
 <wire x1="63.5" y1="48.26" x2="68.58" y2="48.26" width="0.1524" layer="91"/>
 <label x="66.04" y="48.26" size="1.778" layer="95"/>
 <wire x1="73.66" y1="45.72" x2="78.74" y2="45.72" width="0.1524" layer="91"/>
 <label x="76.2" y="45.72" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="VCC" class="0">
@@ @@ -5690,17 +5693,12 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <segment>
 <pinref part="R6" gate="G$1" pin="2"/>
 <pinref part="P+3" gate="1" pin="VCC"/>
 <wire x1="119.38" y1="144.78" x2="119.38" y2="142.24" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="P+6" gate="1" pin="VCC"/>
 <pinref part="R7" gate="G$1" pin="1"/>
 <wire x1="170.18" y1="152.4" x2="170.18" y2="154.94" width="0.1524" layer="91"/>
 <wire x1="109.22" y1="144.78" x2="109.22" y2="142.24" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="P+5" gate="1" pin="VCC"/>
 <pinref part="SP3" gate="S1" pin="-"/>
-<wire x1="160.02" y1="147.32" x2="160.02" y2="154.94" width="0.1524" layer="91"/>
+<wire x1="152.4" y1="142.24" x2="152.4" y2="149.86" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="IC1" gate="G$1" pin="VCC"/>
@@ @@ -5790,22 +5788,15 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 </segment>
 <segment>
 <pinref part="R6" gate="G$1" pin="1"/>
 <pinref part="Q2" gate="G$1" pin="C"/>
 <wire x1="119.38" y1="132.08" x2="119.38" y2="129.54" width="0.1524" layer="91"/>
 <pinref part="C6" gate="G$1" pin="1"/>
 <wire x1="119.38" y1="129.54" x2="119.38" y2="124.46" width="0.1524" layer="91"/>
 <wire x1="129.54" y1="127" x2="129.54" y2="129.54" width="0.1524" layer="91"/>
 <wire x1="129.54" y1="129.54" x2="119.38" y2="129.54" width="0.1524" layer="91"/>
 <junction x="119.38" y="129.54"/>
 <junction x="129.54" y="129.54"/>
 <label x="137.16" y="129.54" size="1.778" layer="95"/>
 <pinref part="SP3" gate="S1" pin="+"/>
 <wire x1="160.02" y1="137.16" x2="160.02" y2="129.54" width="0.1524" layer="91"/>
 <wire x1="160.02" y1="129.54" x2="129.54" y2="129.54" width="0.1524" layer="91"/>
 <pinref part="LED1" gate="G$1" pin="C"/>
 <wire x1="170.18" y1="132.08" x2="170.18" y2="129.54" width="0.1524" layer="91"/>
 <wire x1="170.18" y1="129.54" x2="160.02" y2="129.54" width="0.1524" layer="91"/>
 <junction x="160.02" y="129.54"/>
 <wire x1="109.22" y1="132.08" x2="109.22" y2="129.54" width="0.1524" layer="91"/>
 <label x="111.76" y="129.54" size="1.778" layer="95"/>
 <wire x1="116.84" y1="129.54" x2="109.22" y2="129.54" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="149.86" x2="96.52" y2="129.54" width="0.1524" layer="91"/>
 <pinref part="C3" gate="G$1" pin="2"/>
 <wire x1="96.52" y1="129.54" x2="109.22" y2="129.54" width="0.1524" layer="91"/>
 <junction x="109.22" y="129.54"/>
 <pinref part="D2" gate="G$1" pin="C"/>
 <wire x1="109.22" y1="124.46" x2="109.22" y2="129.54" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="PA1" class="0">
@@ @@ -5815,9 +5806,9 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <pinref part="JP3" gate="G$1" pin="4"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="CHARGE"/>
 <wire x1="27.94" y1="73.66" x2="20.32" y2="73.66" width="0.1524" layer="91"/>
 <label x="20.32" y="73.66" size="1.778" layer="95"/>
 <pinref part="R18" gate="G$1" pin="1"/>
 <wire x1="25.4" y1="71.12" x2="17.78" y2="71.12" width="0.1524" layer="91"/>
 <label x="17.78" y="71.12" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA2" class="0">
@@ @@ -5826,6 +5817,11 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <label x="25.4" y="119.38" size="1.778" layer="95"/>
 <pinref part="JP3" gate="G$1" pin="5"/>
 </segment>
 <segment>
 <pinref part="SP3" gate="S1" pin="+"/>
 <wire x1="152.4" y1="132.08" x2="152.4" y2="121.92" width="0.1524" layer="91"/>
 <label x="152.4" y="121.92" size="1.778" layer="95" rot="R90"/>
 </segment>
 </net>
 <net name="PA3" class="0">
 <segment>
@@ @@ -5833,6 +5829,11 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <label x="25.4" y="121.92" size="1.778" layer="95"/>
 <pinref part="JP3" gate="G$1" pin="6"/>
 </segment>
 <segment>
 <pinref part="R7" gate="G$1" pin="1"/>
 <wire x1="165.1" y1="147.32" x2="165.1" y2="152.4" width="0.1524" layer="91"/>
 <label x="165.1" y="152.4" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA4" class="0">
 <segment>
@@ @@ -5869,19 +5870,13 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <label x="66.04" y="160.02" size="1.778" layer="95"/>
 </segment>
 <segment>
 <label x="129.54" y="73.66" size="1.778" layer="95"/>
 <wire x1="124.46" y1="45.72" x2="124.46" y2="73.66" width="0.1524" layer="91"/>
 <pinref part="D1" gate="G$1" pin="C"/>
 <wire x1="99.06" y1="73.66" x2="111.76" y2="73.66" width="0.1524" layer="91"/>
 <wire x1="111.76" y1="73.66" x2="124.46" y2="73.66" width="0.1524" layer="91"/>
 <junction x="124.46" y="73.66"/>
 <junction x="111.76" y="73.66"/>
 <wire x1="111.76" y1="71.12" x2="111.76" y2="73.66" width="0.1524" layer="91"/>
 <pinref part="C7" gate="G$1" pin="1"/>
 <pinref part="R4" gate="G$1" pin="1"/>
 <pinref part="C10" gate="G$1" pin="1"/>
 <wire x1="124.46" y1="73.66" x2="134.62" y2="73.66" width="0.1524" layer="91"/>
 <wire x1="134.62" y1="73.66" x2="134.62" y2="68.58" width="0.1524" layer="91"/>
 <wire x1="152.4" y1="71.12" x2="152.4" y2="66.04" width="0.1524" layer="91"/>
 <wire x1="152.4" y1="71.12" x2="157.48" y2="71.12" width="0.1524" layer="91"/>
 <junction x="152.4" y="71.12"/>
 <wire x1="147.32" y1="71.12" x2="152.4" y2="71.12" width="0.1524" layer="91"/>
 <pinref part="R5" gate="G$1" pin="1"/>
 <label x="154.94" y="71.12" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="N$7" class="0">
@@ @@ -5902,46 +5897,31 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <pinref part="C3" gate="G$1" pin="1"/>
 </segment>
 </net>
 <net name="N$27" class="0">
 <segment>
 <pinref part="R5" gate="G$1" pin="2"/>
 <wire x1="96.52" y1="149.86" x2="96.52" y2="134.62" width="0.1524" layer="91"/>
 <pinref part="C3" gate="G$1" pin="2"/>
 </segment>
 </net>
 <net name="N$31" class="0">
 <segment>
 <pinref part="R5" gate="G$1" pin="1"/>
 <wire x1="96.52" y1="124.46" x2="96.52" y2="119.38" width="0.1524" layer="91"/>
 <pinref part="Q2" gate="G$1" pin="B"/>
 <wire x1="96.52" y1="119.38" x2="114.3" y2="119.38" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$10" class="0">
 <segment>
 <pinref part="R7" gate="G$1" pin="2"/>
 <pinref part="LED1" gate="G$1" pin="A"/>
-<wire x1="170.18" y1="139.7" x2="170.18" y2="142.24" width="0.1524" layer="91"/>
+<wire x1="165.1" y1="134.62" x2="165.1" y2="137.16" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$11" class="0">
 <segment>
 <pinref part="U$2" gate="G$1" pin="RDCM"/>
 <pinref part="R15" gate="G$1" pin="1"/>
-<wire x1="66.04" y1="63.5" x2="63.5" y2="63.5" width="0.1524" layer="91"/>
+<wire x1="76.2" y1="60.96" x2="73.66" y2="60.96" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$13" class="0">
 <segment>
 <pinref part="U$2" gate="G$1" pin="FB"/>
-<wire x1="63.5" y1="33.02" x2="71.12" y2="33.02" width="0.1524" layer="91"/>
+<wire x1="73.66" y1="30.48" x2="81.28" y2="30.48" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="1"/>
 <wire x1="71.12" y1="30.48" x2="71.12" y2="33.02" width="0.1524" layer="91"/>
 <junction x="71.12" y="33.02"/>
 <wire x1="71.12" y1="33.02" x2="124.46" y2="33.02" width="0.1524" layer="91"/>
 <wire x1="124.46" y1="35.56" x2="124.46" y2="33.02" width="0.1524" layer="91"/>
 <junction x="124.46" y="33.02"/>
 <wire x1="81.28" y1="27.94" x2="81.28" y2="30.48" width="0.1524" layer="91"/>
 <junction x="81.28" y="30.48"/>
 <wire x1="81.28" y1="30.48" x2="124.46" y2="30.48" width="0.1524" layer="91"/>
 <wire x1="124.46" y1="33.02" x2="124.46" y2="30.48" width="0.1524" layer="91"/>
 <junction x="124.46" y="30.48"/>
 <wire x1="124.46" y1="30.48" x2="124.46" y2="27.94" width="0.1524" layer="91"/>
 <pinref part="R4" gate="G$1" pin="2"/>
 <pinref part="R8" gate="G$1" pin="1"/>
 </segment>
@@ @@ -5955,92 +5935,114 @@ 128 bit, I2C (AA = 1.8 V/LC = 2.5 V/C = @@
 <net name="N$1" class="0">
 <segment>
 <pinref part="U$2" gate="G$1" pin="CSP"/>
 <wire x1="63.5" y1="43.18" x2="73.66" y2="43.18" width="0.1524" layer="91"/>
 <wire x1="73.66" y1="43.18" x2="73.66" y2="48.26" width="0.1524" layer="91"/>
 <wire x1="73.66" y1="40.64" x2="83.82" y2="40.64" width="0.1524" layer="91"/>
 <wire x1="83.82" y1="40.64" x2="83.82" y2="45.72" width="0.1524" layer="91"/>
 <pinref part="R13" gate="G$1" pin="1"/>
-<wire x1="73.66" y1="48.26" x2="78.74" y2="48.26" width="0.1524" layer="91"/>
+<wire x1="83.82" y1="45.72" x2="88.9" y2="45.72" width="0.1524" layer="91"/>
 <pinref part="Q1" gate="G$1" pin="S"/>
-<junction x="78.74" y="48.26"/>
+<junction x="88.9" y="45.72"/>
 </segment>
 </net>
 <net name="SDOT" class="0">
 <segment>
 <pinref part="D1" gate="G$1" pin="A"/>
-<wire x1="93.98" y1="73.66" x2="90.424" y2="73.66" width="0.1524" layer="91"/>
+<wire x1="104.14" y1="71.12" x2="100.584" y2="71.12" width="0.1524" layer="91"/>
 <pinref part="U$10" gate="G$1" pin="S_DOT"/>
 </segment>
 </net>
 <net name="N$2" class="0">
 <segment>
 <pinref part="U$2" gate="G$1" pin="HVGATE"/>
-<wire x1="63.5" y1="53.34" x2="71.12" y2="53.34" width="0.1524" layer="91"/>
+<wire x1="73.66" y1="50.8" x2="81.28" y2="50.8" width="0.1524" layer="91"/>
 <pinref part="Q1" gate="G$1" pin="G"/>
 </segment>
 </net>
 <net name="N$3" class="0">
 <segment>
 <pinref part="C5" gate="G$1" pin="2"/>
-<wire x1="71.12" y1="83.82" x2="71.12" y2="81.28" width="0.1524" layer="91"/>
+<wire x1="81.28" y1="81.28" x2="81.28" y2="78.74" width="0.1524" layer="91"/>
 <pinref part="R3" gate="G$1" pin="1"/>
 </segment>
 </net>
 <net name="N$4" class="0">
 <segment>
 <pinref part="R3" gate="G$1" pin="2"/>
 <wire x1="71.12" y1="68.58" x2="71.12" y2="71.12" width="0.1524" layer="91"/>
 <wire x1="71.12" y1="68.58" x2="78.74" y2="68.58" width="0.1524" layer="91"/>
 <wire x1="78.74" y1="68.58" x2="78.74" y2="65.278" width="0.1524" layer="91"/>
 <wire x1="82.296" y1="65.278" x2="78.74" y2="65.278" width="0.1524" layer="91"/>
 <wire x1="78.74" y1="65.278" x2="78.74" y2="63.5" width="0.1524" layer="91"/>
 <wire x1="81.28" y1="66.04" x2="81.28" y2="68.58" width="0.1524" layer="91"/>
 <wire x1="81.28" y1="66.04" x2="88.9" y2="66.04" width="0.1524" layer="91"/>
 <wire x1="88.9" y1="66.04" x2="88.9" y2="62.738" width="0.1524" layer="91"/>
 <wire x1="92.456" y1="62.738" x2="88.9" y2="62.738" width="0.1524" layer="91"/>
 <wire x1="88.9" y1="62.738" x2="88.9" y2="60.96" width="0.1524" layer="91"/>
 <pinref part="R15" gate="G$1" pin="2"/>
 <wire x1="78.74" y1="63.5" x2="78.74" y2="58.42" width="0.1524" layer="91"/>
 <wire x1="76.2" y1="63.5" x2="78.74" y2="63.5" width="0.1524" layer="91"/>
 <junction x="78.74" y="63.5"/>
 <wire x1="88.9" y1="60.96" x2="88.9" y2="55.88" width="0.1524" layer="91"/>
 <wire x1="86.36" y1="60.96" x2="88.9" y2="60.96" width="0.1524" layer="91"/>
 <junction x="88.9" y="60.96"/>
 <pinref part="U$10" gate="G$1" pin="P_DOT"/>
 <pinref part="Q1" gate="G$1" pin="D"/>
-<junction x="78.74" y="65.278"/>
+<junction x="88.9" y="62.738"/>
 </segment>
 </net>
 <net name="N$39" class="0">
 <segment>
 <pinref part="R9" gate="G$1" pin="2"/>
 <pinref part="U$2" gate="G$1" pin="UVLO1"/>
-<wire x1="25.4" y1="48.26" x2="27.94" y2="48.26" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="45.72" x2="38.1" y2="45.72" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$40" class="0">
 <segment>
 <pinref part="R10" gate="G$1" pin="2"/>
 <pinref part="U$2" gate="G$1" pin="UVLO2"/>
-<wire x1="25.4" y1="38.1" x2="27.94" y2="38.1" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="35.56" x2="38.1" y2="35.56" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$41" class="0">
 <segment>
 <pinref part="R11" gate="G$1" pin="2"/>
 <pinref part="U$2" gate="G$1" pin="OVLO1"/>
-<wire x1="25.4" y1="43.18" x2="27.94" y2="43.18" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="40.64" x2="38.1" y2="40.64" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$42" class="0">
 <segment>
 <pinref part="U$2" gate="G$1" pin="OVLO2"/>
 <pinref part="R14" gate="G$1" pin="2"/>
-<wire x1="27.94" y1="33.02" x2="25.4" y2="33.02" width="0.1524" layer="91"/>
+<wire x1="38.1" y1="30.48" x2="33.02" y2="30.48" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$43" class="0">
 <segment>
 <pinref part="R17" gate="G$1" pin="2"/>
 <pinref part="U$2" gate="G$1" pin="!DONE"/>
-<wire x1="25.4" y1="58.42" x2="27.94" y2="58.42" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="55.88" x2="38.1" y2="55.88" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$44" class="0">
 <segment>
 <pinref part="R12" gate="G$1" pin="2"/>
 <pinref part="U$2" gate="G$1" pin="!FAULT"/>
 <wire x1="25.4" y1="53.34" x2="27.94" y2="53.34" width="0.1524" layer="91"/>
 <wire x1="33.02" y1="50.8" x2="38.1" y2="50.8" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$5" class="0">
 <segment>
 <pinref part="U$2" gate="G$1" pin="CHARGE"/>
 <pinref part="R18" gate="G$1" pin="2"/>
 <wire x1="38.1" y1="71.12" x2="35.56" y2="71.12" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="HV_OUT" class="0">
 <segment>
 <wire x1="124.46" y1="43.18" x2="124.46" y2="71.12" width="0.1524" layer="91"/>
 <pinref part="D1" gate="G$1" pin="C"/>
 <wire x1="109.22" y1="71.12" x2="124.46" y2="71.12" width="0.1524" layer="91"/>
 <junction x="124.46" y="71.12"/>
 <junction x="132.08" y="71.12"/>
 <wire x1="132.08" y1="66.04" x2="132.08" y2="71.12" width="0.1524" layer="91"/>
 <pinref part="C7" gate="G$1" pin="1"/>
 <pinref part="R4" gate="G$1" pin="1"/>
 <wire x1="124.46" y1="71.12" x2="132.08" y2="71.12" width="0.1524" layer="91"/>
 <wire x1="132.08" y1="71.12" x2="137.16" y2="71.12" width="0.1524" layer="91"/>
 <pinref part="R5" gate="G$1" pin="2"/>
 </segment>
 </net>
 </nets>

0 comments (0 inline, 0 general)