seniordesign-hardware Changeset - 5aa8b031f5ee

Changeset - 5aa8b031f5ee

Parent rev.

Child rev.

[Not reviewed]

default

0 2 0

kripperger@CL-SEC241-09.cedarville.edu - 13 years ago 2012-10-26 15:08:56
kripperger@CL-SEC241-09.cedarville.edu

Schematic cleanup

2 files changed with 83 insertions and 96 deletions:

slave-daughter/slave-daughter-camera.sch

slave-daughter/slave-daughter-sensors.sch

0 comments (0 inline, 0 general)

slave-daughter/slave-daughter-camera.sch

➞

Show inline comments

@@ @@ -807,53 +807,53 @@ We've spent an enormous amount of time c @@
 <pin name="3" x="10.16" y="-12.7" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="4" x="10.16" y="-10.16" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="5" x="10.16" y="-7.62" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="6" x="10.16" y="-5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="7" x="10.16" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="8" x="10.16" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="9" x="10.16" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="10" x="10.16" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 </symbol>
 <symbol name="USB">
 <wire x1="5.08" y1="8.89" x2="0" y2="8.89" width="0.254" layer="94"/>
 <wire x1="0" y1="8.89" x2="0" y2="-1.27" width="0.254" layer="94"/>
 <wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.254" layer="94"/>
 <text x="3.81" y="0" size="2.54" layer="94" rot="R90">USB</text>
 <pin name="D+" x="-2.54" y="7.62" visible="pad" length="short"/>
 <pin name="D-" x="-2.54" y="5.08" visible="pad" length="short"/>
 <pin name="VBUS" x="-2.54" y="2.54" visible="pad" length="short"/>
 <pin name="GND" x="-2.54" y="0" visible="pad" length="short"/>
 </symbol>
 <symbol name="GND">
 <wire x1="-1.905" y1="0" x2="1.905" y2="0" width="0.254" layer="94"/>
 <text x="-2.54" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="GND" x="0" y="2.54" visible="off" length="short" direction="sup" rot="R270"/>
 </symbol>
-<symbol name="3.3V">
+<symbol name="VCC2">
 <wire x1="0.762" y1="1.27" x2="0" y2="2.54" width="0.254" layer="94"/>
 <wire x1="0" y1="2.54" x2="-0.762" y2="1.27" width="0.254" layer="94"/>
 <text x="-1.016" y="3.556" size="1.778" layer="96">&gt;VALUE</text>
-<pin name="3.3V" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
+<pin name="VCC" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="FRAME-LETTER" prefix="FRAME">
 <description>&lt;b&gt;Schematic Frame&lt;/b&gt;&lt;p&gt;
 Standard 8.5x11 US Letter frame</description>
 <gates>
 <gate name="G$1" symbol="LETTER_L" x="0" y="0"/>
 <gate name="G$2" symbol="DOCFIELD" x="147.32" y="0" addlevel="must"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="M10" prefix="JP">
 <description>&lt;b&gt;Header 10&lt;/b&gt;
 Standard 10-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).</description>
 <gates>
 <gate name="G$1" symbol="M10" x="0" y="7.62"/>
 </gates>
@@ @@ -1117,152 +1117,154 @@ Standard 10-pin 0.1" header. Use with st @@
 <connect gate="G$1" pin="D+" pad="D+"/>
 <connect gate="G$1" pin="D-" pad="D-"/>
 <connect gate="G$1" pin="GND" pad="GND"/>
 <connect gate="G$1" pin="VBUS" pad="VBUS"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="GND" prefix="GND">
 <description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
 <gates>
 <gate name="1" symbol="GND" x="0" y="0"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
-<deviceset name="3.3V" prefix="P+">
+<deviceset name="VCC" prefix="P+">
 <description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
 <gates>
-<gate name="G$1" symbol="3.3V" x="0" y="0"/>
+<gate name="1" symbol="VCC2" x="0" y="0"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 </libraries>
 <attributes>
 </attributes>
 <variantdefs>
 </variantdefs>
 <classes>
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
 <parts>
 <part name="FRAME1" library="SparkFun" deviceset="FRAME-LETTER" device=""/>
 <part name="JP1" library="SparkFun" deviceset="M10" device="LOCK"/>
 <part name="JP2" library="SparkFun" deviceset="M10" device="LOCK"/>
 <part name="X1" library="SparkFun" deviceset="USB" device="-A-H"/>
 <part name="X2" library="SparkFun" deviceset="USB" device="-A-H"/>
 <part name="X3" library="SparkFun" deviceset="USB" device="-A-H"/>
 <part name="P+2" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="GND1" library="SparkFun" deviceset="GND" device=""/>
-<part name="P+1" library="SparkFun" deviceset="3.3V" device=""/>
+<part name="P+1" library="SparkFun" deviceset="VCC" device=""/>
 <part name="GND2" library="SparkFun" deviceset="GND" device=""/>
 <part name="P+3" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="GND3" library="SparkFun" deviceset="GND" device=""/>
 <part name="P+4" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="GND4" library="SparkFun" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <text x="157.734" y="26.416" size="5.08" layer="94" font="vector">Slave Daughterboard</text>
 <wire x1="60.96" y1="185.42" x2="60.96" y2="93.98" width="0.3048" layer="94"/>
 <wire x1="60.96" y1="93.98" x2="0" y2="93.98" width="0.3048" layer="94"/>
 <wire x1="60.96" y1="185.42" x2="60.96" y2="93.98" width="0.4064" layer="94"/>
 <wire x1="60.96" y1="93.98" x2="0" y2="93.98" width="0.4064" layer="94"/>
 <text x="12.7" y="175.26" size="6.4516" layer="94">Headers</text>
 <text x="76.2" y="139.7" size="1.778" layer="91">KUSBLX-SMT-AS1N-B</text>
 <text x="45.72" y="60.96" size="1.778" layer="91">KUSBLX-SMT-AS1N-B</text>
 <wire x1="60.96" y1="93.98" x2="121.92" y2="93.98" width="0.4064" layer="94"/>
 <wire x1="121.92" y1="93.98" x2="121.92" y2="185.42" width="0.4064" layer="94"/>
 <text x="71.12" y="175.26" size="6.4516" layer="94">Cameras</text>
 </plain>
 <instances>
 <instance part="FRAME1" gate="G$1" x="0" y="0"/>
 <instance part="FRAME1" gate="G$2" x="147.32" y="0"/>
 <instance part="JP1" gate="G$1" x="12.7" y="160.02"/>
 <instance part="JP2" gate="G$1" x="12.7" y="121.92"/>
 <instance part="X1" gate="G$1" x="116.84" y="114.3"/>
 <instance part="X2" gate="G$1" x="116.84" y="96.52"/>
 <instance part="X3" gate="G$1" x="116.84" y="81.28"/>
 <instance part="P+2" gate="G$1" x="45.72" y="160.02"/>
 <instance part="GND1" gate="1" x="45.72" y="142.24"/>
 <instance part="P+1" gate="G$1" x="76.2" y="119.38"/>
 <instance part="GND2" gate="1" x="83.82" y="121.92" rot="R180"/>
 <instance part="P+3" gate="G$1" x="76.2" y="101.6"/>
 <instance part="GND3" gate="1" x="83.82" y="104.14" rot="R180"/>
 <instance part="P+4" gate="G$1" x="76.2" y="83.82"/>
 <instance part="GND4" gate="1" x="83.82" y="86.36" rot="R180"/>
 <instance part="X1" gate="G$1" x="81.28" y="162.56" rot="R180"/>
 <instance part="X2" gate="G$1" x="81.28" y="137.16" rot="R180"/>
 <instance part="X3" gate="G$1" x="81.28" y="111.76" rot="R180"/>
 <instance part="GND1" gate="1" x="38.1" y="137.16"/>
 <instance part="P+1" gate="1" x="38.1" y="149.86"/>
 <instance part="GND2" gate="1" x="96.52" y="149.86"/>
 <instance part="GND3" gate="1" x="96.52" y="124.46"/>
 <instance part="GND4" gate="1" x="96.52" y="99.06"/>
 </instances>
 <busses>
 </busses>
 <nets>
 <net name="GND" class="0">
 <segment>
 <pinref part="GND1" gate="1" pin="GND"/>
 <wire x1="38.1" y1="139.7" x2="38.1" y2="142.24" width="0.1524" layer="91"/>
 <pinref part="JP1" gate="G$1" pin="1"/>
-<wire x1="22.86" y1="142.24" x2="33.02" y2="142.24" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="142.24" x2="38.1" y2="142.24" width="0.1524" layer="91"/>
 <label x="27.94" y="142.24" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="GND2" gate="1" pin="GND"/>
 <wire x1="96.52" y1="152.4" x2="96.52" y2="160.02" width="0.1524" layer="91"/>
 <pinref part="X1" gate="G$1" pin="VBUS"/>
 <pinref part="GND2" gate="1" pin="GND"/>
 <wire x1="114.3" y1="116.84" x2="83.82" y2="116.84" width="0.1524" layer="91"/>
 <wire x1="83.82" y1="116.84" x2="83.82" y2="119.38" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="160.02" x2="83.82" y2="160.02" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="GND3" gate="1" pin="GND"/>
 <wire x1="96.52" y1="127" x2="96.52" y2="134.62" width="0.1524" layer="91"/>
 <pinref part="X2" gate="G$1" pin="VBUS"/>
 <pinref part="GND3" gate="1" pin="GND"/>
 <wire x1="114.3" y1="99.06" x2="83.82" y2="99.06" width="0.1524" layer="91"/>
 <wire x1="83.82" y1="99.06" x2="83.82" y2="101.6" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="134.62" x2="83.82" y2="134.62" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="GND4" gate="1" pin="GND"/>
 <wire x1="96.52" y1="101.6" x2="96.52" y2="109.22" width="0.1524" layer="91"/>
 <pinref part="X3" gate="G$1" pin="VBUS"/>
 <pinref part="GND4" gate="1" pin="GND"/>
 <wire x1="114.3" y1="83.82" x2="83.82" y2="83.82" width="0.1524" layer="91"/>
 <wire x1="96.52" y1="109.22" x2="83.82" y2="109.22" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="VBAT" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="2"/>
 <wire x1="22.86" y1="144.78" x2="33.02" y2="144.78" width="0.1524" layer="91"/>
 <label x="27.94" y="144.78" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="VCC" class="0">
 <segment>
 <pinref part="P+1" gate="1" pin="VCC"/>
 <wire x1="38.1" y1="149.86" x2="38.1" y2="147.32" width="0.1524" layer="91"/>
 <pinref part="JP1" gate="G$1" pin="3"/>
-<wire x1="22.86" y1="147.32" x2="33.02" y2="147.32" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="147.32" x2="38.1" y2="147.32" width="0.1524" layer="91"/>
 <label x="27.94" y="147.32" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="MOSI" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="4"/>
 <wire x1="22.86" y1="149.86" x2="33.02" y2="149.86" width="0.1524" layer="91"/>
 <label x="27.94" y="149.86" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="MISO" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="5"/>
 <wire x1="22.86" y1="152.4" x2="33.02" y2="152.4" width="0.1524" layer="91"/>
 <label x="27.94" y="152.4" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="SCK" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="6"/>
 <wire x1="22.86" y1="154.94" x2="33.02" y2="154.94" width="0.1524" layer="91"/>
 <label x="27.94" y="154.94" size="1.778" layer="95"/>
 </segment>
 </net>
@@ @@ -1343,50 +1345,30 @@ Standard 10-pin 0.1" header. Use with st @@
 <label x="27.94" y="119.38" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA5" class="0">
 <segment>
 <pinref part="JP2" gate="G$1" pin="8"/>
 <wire x1="22.86" y1="121.92" x2="33.02" y2="121.92" width="0.1524" layer="91"/>
 <label x="27.94" y="121.92" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA6" class="0">
 <segment>
 <pinref part="JP2" gate="G$1" pin="9"/>
 <wire x1="22.86" y1="124.46" x2="33.02" y2="124.46" width="0.1524" layer="91"/>
 <label x="27.94" y="124.46" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA7" class="0">
 <segment>
 <pinref part="JP2" gate="G$1" pin="10"/>
 <wire x1="22.86" y1="127" x2="33.02" y2="127" width="0.1524" layer="91"/>
 <label x="27.94" y="127" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="3.3V" class="0">
 <segment>
 <pinref part="X1" gate="G$1" pin="GND"/>
 <pinref part="P+1" gate="G$1" pin="3.3V"/>
 <wire x1="114.3" y1="114.3" x2="76.2" y2="114.3" width="0.1524" layer="91"/>
 <wire x1="76.2" y1="114.3" x2="76.2" y2="119.38" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="X2" gate="G$1" pin="GND"/>
 <pinref part="P+3" gate="G$1" pin="3.3V"/>
 <wire x1="114.3" y1="96.52" x2="76.2" y2="96.52" width="0.1524" layer="91"/>
 <wire x1="76.2" y1="96.52" x2="76.2" y2="101.6" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="X3" gate="G$1" pin="GND"/>
 <pinref part="P+4" gate="G$1" pin="3.3V"/>
 <wire x1="114.3" y1="81.28" x2="76.2" y2="81.28" width="0.1524" layer="91"/>
 <wire x1="76.2" y1="81.28" x2="76.2" y2="83.82" width="0.1524" layer="91"/>
 </segment>
 </net>
 </nets>
 </sheet>
 </sheets>
 </schematic>
 </drawing>
 </eagle>

slave-daughter/slave-daughter-sensors.sch

➞

Show inline comments

@@ @@ -626,59 +626,59 @@ Commonly used for small ceramic capacito @@
 <wire x1="3.81" y1="5.08" x2="5.08" y2="5.08" width="0.6096" layer="94"/>
 <text x="0" y="-22.86" size="1.778" layer="96">&gt;VALUE</text>
 <text x="0" y="8.89" size="1.778" layer="95">&gt;NAME</text>
 <pin name="1" x="10.16" y="-17.78" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="2" x="10.16" y="-15.24" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="3" x="10.16" y="-12.7" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="4" x="10.16" y="-10.16" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="5" x="10.16" y="-7.62" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="6" x="10.16" y="-5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="7" x="10.16" y="-2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="8" x="10.16" y="0" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="9" x="10.16" y="2.54" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="10" x="10.16" y="5.08" visible="pad" length="middle" direction="pas" swaplevel="1" rot="R180"/>
 </symbol>
 <symbol name="CAP">
 <wire x1="0" y1="2.54" x2="0" y2="2.032" width="0.1524" layer="94"/>
 <wire x1="0" y1="0" x2="0" y2="0.508" width="0.1524" layer="94"/>
 <text x="1.524" y="2.921" size="1.778" layer="95">&gt;NAME</text>
 <text x="1.524" y="-2.159" size="1.778" layer="96">&gt;VALUE</text>
 <rectangle x1="-2.032" y1="0.508" x2="2.032" y2="1.016" layer="94"/>
 <rectangle x1="-2.032" y1="1.524" x2="2.032" y2="2.032" layer="94"/>
 <pin name="1" x="0" y="5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
 <pin name="2" x="0" y="-2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
 </symbol>
 <symbol name="3.3V">
 <wire x1="0.762" y1="1.27" x2="0" y2="2.54" width="0.254" layer="94"/>
 <wire x1="0" y1="2.54" x2="-0.762" y2="1.27" width="0.254" layer="94"/>
 <text x="-1.016" y="3.556" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="3.3V" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
 <symbol name="GND">
 <wire x1="-1.905" y1="0" x2="1.905" y2="0" width="0.254" layer="94"/>
 <text x="-2.54" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="GND" x="0" y="2.54" visible="off" length="short" direction="sup" rot="R270"/>
 </symbol>
 <symbol name="VCC2">
 <wire x1="0.762" y1="1.27" x2="0" y2="2.54" width="0.254" layer="94"/>
 <wire x1="0" y1="2.54" x2="-0.762" y2="1.27" width="0.254" layer="94"/>
 <text x="-1.016" y="3.556" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="VCC" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="FRAME-LETTER" prefix="FRAME">
 <description>&lt;b&gt;Schematic Frame&lt;/b&gt;&lt;p&gt;
 Standard 8.5x11 US Letter frame</description>
 <gates>
 <gate name="G$1" symbol="LETTER_L" x="0" y="0"/>
 <gate name="G$2" symbol="DOCFIELD" x="147.32" y="0" addlevel="must"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="M10" prefix="JP">
 <description>&lt;b&gt;Header 10&lt;/b&gt;
 Standard 10-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115).</description>
 <gates>
 <gate name="G$1" symbol="M10" x="0" y="7.62"/>
 </gates>
 <devices>
@@ @@ -874,65 +874,65 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="ASMD" package="CTZ3">
 <connects>
 <connect gate="G$1" pin="1" pad="+"/>
 <connect gate="G$1" pin="2" pad="-"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 <device name="KIT" package="CAP-PTH-SMALL-KIT">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="2" pad="2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
-<deviceset name="3.3V" prefix="P+">
+<deviceset name="GND" prefix="GND">
 <description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
 <gates>
-<gate name="G$1" symbol="3.3V" x="0" y="0"/>
+<gate name="1" symbol="GND" x="0" y="0"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
-<deviceset name="GND" prefix="GND">
+<deviceset name="VCC" prefix="P+">
 <description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
 <gates>
-<gate name="1" symbol="GND" x="0" y="0"/>
+<gate name="1" symbol="VCC2" x="0" y="0"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="SeniorDesign">
 <packages>
 <package name="SOIC8">
 <wire x1="2.4" y1="1.9" x2="2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="2.4" y2="-1.9" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.9" x2="-2.4" y2="-1.9" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="-1.9" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="-1.4" x2="-2.4" y2="1.9" width="0.2032" layer="51"/>
 <wire x1="-2.4" y1="1.9" x2="2.4" y2="1.9" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="-2.4" y2="-1.4" width="0.2032" layer="51"/>
 <smd name="2" x="-0.635" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="7" x="-0.635" y="2.6" dx="0.6" dy="2.2" layer="1"/>
 <smd name="1" x="-1.905" y="-2.6" dx="0.6" dy="2.2" layer="1"/>
@@ @@ -1043,140 +1043,167 @@ i2c</description> @@
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 </libraries>
 <attributes>
 </attributes>
 <variantdefs>
 </variantdefs>
 <classes>
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
 <parts>
 <part name="FRAME1" library="SparkFun" deviceset="FRAME-LETTER" device=""/>
 <part name="JP1" library="SparkFun" deviceset="M10" device="LOCK"/>
 <part name="JP2" library="SparkFun" deviceset="M10" device="LOCK"/>
 <part name="U$1" library="SeniorDesign" deviceset="HIH6131-021-001" device=""/>
 <part name="U$2" library="SeniorDesign" deviceset="MAX44009" device=""/>
 <part name="C1" library="SparkFun" deviceset="CAP" device="0603-CAP" value="0.1uF"/>
 <part name="C2" library="SparkFun" deviceset="CAP" device="0603-CAP" value="0.22uF"/>
 <part name="C3" library="SparkFun" deviceset="CAP" device="0603-CAP" value="1uF"/>
 <part name="P+1" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="P+2" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="P+3" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="GND1" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND2" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND3" library="SparkFun" deviceset="GND" device=""/>
 <part name="P+4" library="SparkFun" deviceset="VCC" device=""/>
 <part name="P+5" library="SparkFun" deviceset="VCC" device=""/>
 <part name="P+6" library="SparkFun" deviceset="VCC" device=""/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <text x="157.734" y="26.416" size="5.08" layer="94" font="vector">Slave Daughterboard</text>
 <wire x1="60.96" y1="185.42" x2="60.96" y2="119.38" width="0.4064" layer="94"/>
 <wire x1="60.96" y1="119.38" x2="60.96" y2="93.98" width="0.4064" layer="94"/>
 <wire x1="60.96" y1="93.98" x2="0" y2="93.98" width="0.4064" layer="94"/>
 <text x="12.7" y="175.26" size="6.4516" layer="94">Headers</text>
 <text x="78.74" y="175.26" size="6.4516" layer="94">Humidity</text>
 <text x="149.86" y="175.26" size="6.4516" layer="94">Light</text>
 <wire x1="60.96" y1="119.38" x2="132.08" y2="119.38" width="0.4064" layer="94"/>
 <wire x1="132.08" y1="119.38" x2="187.96" y2="119.38" width="0.4064" layer="94"/>
 <wire x1="187.96" y1="119.38" x2="248.92" y2="119.38" width="0.4064" layer="94"/>
 <wire x1="132.08" y1="185.42" x2="132.08" y2="119.38" width="0.4064" layer="94"/>
 <wire x1="187.96" y1="185.42" x2="187.96" y2="119.38" width="0.4064" layer="94"/>
 <text x="208.28" y="175.26" size="6.4516" layer="94">Temp</text>
 </plain>
 <instances>
 <instance part="FRAME1" gate="G$1" x="0" y="0"/>
 <instance part="FRAME1" gate="G$2" x="147.32" y="0"/>
 <instance part="JP1" gate="G$1" x="12.7" y="160.02"/>
 <instance part="JP2" gate="G$1" x="12.7" y="121.92"/>
 <instance part="U$1" gate="G$1" x="104.14" y="149.86"/>
 <instance part="U$2" gate="G$1" x="162.56" y="154.94"/>
 <instance part="C1" gate="G$1" x="76.2" y="142.24"/>
 <instance part="C2" gate="G$1" x="66.04" y="142.24"/>
 <instance part="C3" gate="G$1" x="137.16" y="149.86"/>
 <instance part="P+1" gate="G$1" x="38.1" y="149.86"/>
 <instance part="P+2" gate="G$1" x="83.82" y="162.56"/>
 <instance part="P+3" gate="G$1" x="144.78" y="162.56"/>
 <instance part="GND1" gate="1" x="38.1" y="137.16"/>
 <instance part="GND2" gate="1" x="83.82" y="132.08"/>
 <instance part="GND3" gate="1" x="144.78" y="139.7"/>
 <instance part="P+4" gate="1" x="38.1" y="149.86"/>
 <instance part="P+5" gate="1" x="83.82" y="162.56"/>
 <instance part="P+6" gate="1" x="144.78" y="162.56"/>
 </instances>
 <busses>
 </busses>
 <nets>
 <net name="GND" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="1"/>
 <wire x1="22.86" y1="142.24" x2="33.02" y2="142.24" width="0.1524" layer="91"/>
 <label x="27.94" y="142.24" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$1" gate="G$1" pin="VSS"/>
 <wire x1="88.9" y1="147.32" x2="83.82" y2="147.32" width="0.1524" layer="91"/>
 <wire x1="83.82" y1="147.32" x2="83.82" y2="137.16" width="0.1524" layer="91"/>
 <pinref part="GND2" gate="1" pin="GND"/>
 <pinref part="C1" gate="G$1" pin="2"/>
 <wire x1="83.82" y1="137.16" x2="83.82" y2="134.62" width="0.1524" layer="91"/>
 <wire x1="76.2" y1="139.7" x2="76.2" y2="137.16" width="0.1524" layer="91"/>
 <wire x1="76.2" y1="137.16" x2="83.82" y2="137.16" width="0.1524" layer="91"/>
 <junction x="83.82" y="137.16"/>
 <pinref part="C2" gate="G$1" pin="2"/>
 <wire x1="66.04" y1="139.7" x2="66.04" y2="137.16" width="0.1524" layer="91"/>
 <wire x1="66.04" y1="137.16" x2="76.2" y2="137.16" width="0.1524" layer="91"/>
 <junction x="76.2" y="137.16"/>
 <label x="83.82" y="147.32" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="GND"/>
 <wire x1="147.32" y1="147.32" x2="144.78" y2="147.32" width="0.1524" layer="91"/>
 <pinref part="U$2" gate="G$1" pin="A0"/>
 <wire x1="147.32" y1="149.86" x2="144.78" y2="149.86" width="0.1524" layer="91"/>
 <wire x1="144.78" y1="149.86" x2="144.78" y2="147.32" width="0.1524" layer="91"/>
 <pinref part="GND3" gate="1" pin="GND"/>
 <wire x1="144.78" y1="142.24" x2="144.78" y2="144.78" width="0.1524" layer="91"/>
 <junction x="144.78" y="147.32"/>
 <pinref part="C3" gate="G$1" pin="2"/>
 <wire x1="144.78" y1="144.78" x2="144.78" y2="147.32" width="0.1524" layer="91"/>
 <wire x1="137.16" y1="147.32" x2="137.16" y2="144.78" width="0.1524" layer="91"/>
 <wire x1="137.16" y1="144.78" x2="144.78" y2="144.78" width="0.1524" layer="91"/>
 <junction x="144.78" y="144.78"/>
 </segment>
 <segment>
 <pinref part="GND1" gate="1" pin="GND"/>
 <wire x1="38.1" y1="139.7" x2="38.1" y2="142.24" width="0.1524" layer="91"/>
 <pinref part="JP1" gate="G$1" pin="1"/>
 <wire x1="22.86" y1="142.24" x2="38.1" y2="142.24" width="0.1524" layer="91"/>
 <label x="27.94" y="142.24" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="VBAT" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="2"/>
 <wire x1="22.86" y1="144.78" x2="33.02" y2="144.78" width="0.1524" layer="91"/>
 <label x="27.94" y="144.78" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="VCC" class="0">
 <segment>
 <pinref part="U$1" gate="G$1" pin="VDD"/>
 <wire x1="88.9" y1="157.48" x2="83.82" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="83.82" y1="157.48" x2="83.82" y2="162.56" width="0.1524" layer="91"/>
 <pinref part="C2" gate="G$1" pin="1"/>
 <wire x1="66.04" y1="147.32" x2="66.04" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="66.04" y1="157.48" x2="83.82" y2="157.48" width="0.1524" layer="91"/>
 <junction x="83.82" y="157.48"/>
 <pinref part="P+5" gate="1" pin="VCC"/>
 <label x="66.04" y="157.48" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="VCC"/>
 <wire x1="147.32" y1="157.48" x2="144.78" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="144.78" y1="157.48" x2="144.78" y2="162.56" width="0.1524" layer="91"/>
 <wire x1="144.78" y1="157.48" x2="137.16" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="137.16" y1="157.48" x2="137.16" y2="154.94" width="0.1524" layer="91"/>
 <pinref part="C3" gate="G$1" pin="1"/>
 <junction x="144.78" y="157.48"/>
 <pinref part="P+6" gate="1" pin="VCC"/>
 <label x="137.16" y="157.48" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="P+4" gate="1" pin="VCC"/>
 <wire x1="38.1" y1="149.86" x2="38.1" y2="147.32" width="0.1524" layer="91"/>
 <pinref part="JP1" gate="G$1" pin="3"/>
-<wire x1="22.86" y1="147.32" x2="33.02" y2="147.32" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="147.32" x2="38.1" y2="147.32" width="0.1524" layer="91"/>
 <label x="27.94" y="147.32" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="MOSI" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="4"/>
 <wire x1="22.86" y1="149.86" x2="33.02" y2="149.86" width="0.1524" layer="91"/>
 <label x="27.94" y="149.86" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="MISO" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="5"/>
 <wire x1="22.86" y1="152.4" x2="33.02" y2="152.4" width="0.1524" layer="91"/>
 <label x="27.94" y="152.4" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="SCK" class="0">
 <segment>
 <pinref part="JP1" gate="G$1" pin="6"/>
 <wire x1="22.86" y1="154.94" x2="33.02" y2="154.94" width="0.1524" layer="91"/>
 <label x="27.94" y="154.94" size="1.778" layer="95"/>
 </segment>
 </net>
@@ @@ -1277,60 +1304,38 @@ i2c</description> @@
 <label x="27.94" y="119.38" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA5" class="0">
 <segment>
 <pinref part="JP2" gate="G$1" pin="8"/>
 <wire x1="22.86" y1="121.92" x2="33.02" y2="121.92" width="0.1524" layer="91"/>
 <label x="27.94" y="121.92" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA6" class="0">
 <segment>
 <pinref part="JP2" gate="G$1" pin="9"/>
 <wire x1="22.86" y1="124.46" x2="33.02" y2="124.46" width="0.1524" layer="91"/>
 <label x="27.94" y="124.46" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="PA7" class="0">
 <segment>
 <pinref part="JP2" gate="G$1" pin="10"/>
 <wire x1="22.86" y1="127" x2="33.02" y2="127" width="0.1524" layer="91"/>
 <label x="27.94" y="127" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="3.3V" class="0">
 <segment>
 <pinref part="U$2" gate="G$1" pin="VCC"/>
 <pinref part="P+3" gate="G$1" pin="3.3V"/>
 <wire x1="147.32" y1="157.48" x2="144.78" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="144.78" y1="157.48" x2="144.78" y2="162.56" width="0.1524" layer="91"/>
 <wire x1="144.78" y1="157.48" x2="137.16" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="137.16" y1="157.48" x2="137.16" y2="154.94" width="0.1524" layer="91"/>
 <pinref part="C3" gate="G$1" pin="1"/>
 <junction x="144.78" y="157.48"/>
 </segment>
 <segment>
 <pinref part="U$1" gate="G$1" pin="VDD"/>
 <pinref part="P+2" gate="G$1" pin="3.3V"/>
 <wire x1="88.9" y1="157.48" x2="83.82" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="83.82" y1="157.48" x2="83.82" y2="162.56" width="0.1524" layer="91"/>
 <pinref part="C2" gate="G$1" pin="1"/>
 <wire x1="66.04" y1="147.32" x2="66.04" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="66.04" y1="157.48" x2="83.82" y2="157.48" width="0.1524" layer="91"/>
 <junction x="83.82" y="157.48"/>
 </segment>
 </net>
 <net name="N$1" class="0">
 <segment>
 <pinref part="U$1" gate="G$1" pin="VCORE"/>
 <wire x1="88.9" y1="152.4" x2="76.2" y2="152.4" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="1"/>
 <wire x1="76.2" y1="152.4" x2="76.2" y2="147.32" width="0.1524" layer="91"/>
 </segment>
 </net>
 </nets>
 </sheet>
 </sheets>
 </schematic>
 </drawing>
 </eagle>

0 comments (0 inline, 0 general)