seniordesign-hardware Changeset - 5c43830d1ba6

Changeset - 5c43830d1ba6

Parent rev.

Child rev.

[Not reviewed]

default

0 4 0

kripperger@CL-SEC241-09.cedarville.edu - 13 years ago 2012-11-02 12:25:00
kripperger@CL-SEC241-09.cedarville.edu

Crystal Addition

4 files changed with 344 insertions and 153 deletions:

lbr/SeniorDesign.lbr

slave/eagle.epf

slave/slave.brd

176

150

slave/slave.sch

0 comments (0 inline, 0 general)

lbr/SeniorDesign.lbr

➞

Show inline comments

@@ @@ -3,13 +3,13 @@ @@
 <eagle version="6.3">
 <drawing>
 <settings>
 <setting alwaysvectorfont="no"/>
 <setting verticaltext="up"/>
 </settings>
-<grid distance="0.1" unitdist="mm" unit="mm" style="lines" multiple="1" display="yes" altdistance="0.01" altunitdist="mm" altunit="mm"/>
+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
@@ @@ -40,22 +40,68 @@ @@
 <layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
 <layer number="45" name="Holes" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
 <layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
 <layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="50" name="dxf" color="7" fill="1" visible="no" active="no"/>
 <layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="53" name="tGND_GNDA" color="7" fill="9" visible="no" active="no"/>
 <layer number="54" name="bGND_GNDA" color="1" fill="9" visible="no" active="no"/>
 <layer number="56" name="wert" color="7" fill="1" visible="no" active="no"/>
 <layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="93" name="Pins" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="100" name="Muster" color="7" fill="1" visible="no" active="no"/>
 <layer number="101" name="Patch_Top" color="12" fill="4" visible="no" active="yes"/>
 <layer number="102" name="Vscore" color="7" fill="1" visible="no" active="yes"/>
 <layer number="103" name="tMap" color="7" fill="1" visible="no" active="yes"/>
 <layer number="104" name="Name" color="16" fill="1" visible="no" active="yes"/>
 <layer number="105" name="tPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="106" name="bPlate" color="7" fill="1" visible="no" active="yes"/>
 <layer number="107" name="Crop" color="7" fill="1" visible="no" active="yes"/>
 <layer number="116" name="Patch_BOT" color="9" fill="4" visible="no" active="yes"/>
 <layer number="121" name="_tsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="122" name="_bsilk" color="7" fill="1" visible="no" active="yes"/>
 <layer number="125" name="_tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="144" name="Drill_legend" color="7" fill="1" visible="no" active="yes"/>
 <layer number="151" name="HeatSink" color="7" fill="1" visible="no" active="yes"/>
 <layer number="200" name="200bmp" color="1" fill="10" visible="no" active="yes"/>
 <layer number="201" name="201bmp" color="2" fill="10" visible="no" active="yes"/>
 <layer number="202" name="202bmp" color="3" fill="10" visible="no" active="yes"/>
 <layer number="203" name="203bmp" color="4" fill="10" visible="no" active="yes"/>
 <layer number="204" name="204bmp" color="5" fill="10" visible="no" active="yes"/>
 <layer number="205" name="205bmp" color="6" fill="10" visible="no" active="yes"/>
 <layer number="206" name="206bmp" color="7" fill="10" visible="no" active="yes"/>
 <layer number="207" name="207bmp" color="8" fill="10" visible="no" active="yes"/>
 <layer number="208" name="208bmp" color="9" fill="10" visible="no" active="yes"/>
 <layer number="209" name="209bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="210" name="210bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="211" name="211bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="212" name="212bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="213" name="213bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="214" name="214bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="215" name="215bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="216" name="216bmp" color="7" fill="1" visible="no" active="yes"/>
 <layer number="217" name="217bmp" color="18" fill="1" visible="no" active="no"/>
 <layer number="218" name="218bmp" color="19" fill="1" visible="no" active="no"/>
 <layer number="219" name="219bmp" color="20" fill="1" visible="no" active="no"/>
 <layer number="220" name="220bmp" color="21" fill="1" visible="no" active="no"/>
 <layer number="221" name="221bmp" color="22" fill="1" visible="no" active="no"/>
 <layer number="222" name="222bmp" color="23" fill="1" visible="no" active="no"/>
 <layer number="223" name="223bmp" color="24" fill="1" visible="no" active="no"/>
 <layer number="224" name="224bmp" color="25" fill="1" visible="no" active="no"/>
 <layer number="250" name="Descript" color="3" fill="1" visible="no" active="no"/>
 <layer number="251" name="SMDround" color="12" fill="11" visible="no" active="no"/>
 <layer number="254" name="cooling" color="7" fill="1" visible="no" active="yes"/>
 </layers>
 <library>
 <packages>
 <package name="SOIC8">
 <wire x1="2.4" y1="1.9" x2="2.4" y2="-1.4" width="0.2032" layer="51"/>
 <wire x1="2.4" y1="-1.4" x2="2.4" y2="-1.9" width="0.2032" layer="51"/>
@@ @@ -185,12 +231,22 @@ @@
 <smd name="P$6" x="-8.6" y="-0.35" dx="2.2" dy="2.5" layer="1" rot="R180"/>
 <hole x="-8.7" y="4.6" drill="0.9"/>
 <hole x="-8.7" y="5.8" drill="0.9"/>
 <hole x="-12.5" y="2.4" drill="0.9"/>
 <hole x="-8.7" y="5.1" drill="0.9"/>
 </package>
 <package name="CRYS_3.2X1.5">
 <wire x1="-0.75" y1="1.6" x2="0.75" y2="1.6" width="0.127" layer="21"/>
 <wire x1="0.75" y1="1.6" x2="0.75" y2="-1.6" width="0.127" layer="21"/>
 <wire x1="0.75" y1="-1.6" x2="-0.75" y2="-1.6" width="0.127" layer="21"/>
 <wire x1="-0.75" y1="-1.6" x2="-0.75" y2="1.6" width="0.127" layer="21"/>
 <smd name="P$1" x="0" y="1.3" dx="1.9" dy="1.1" layer="1"/>
 <smd name="P$2" x="0" y="-1.3" dx="1.9" dy="1.1" layer="1"/>
 <text x="1.4" y="0.7" size="1.27" layer="25">&gt;NAME</text>
 <text x="1.3" y="-1.8" size="1.27" layer="27">&gt;VALUE</text>
 </package>
 </packages>
 <symbols>
 <symbol name="PCF8523">
 <description>The PCF8523 is a CMOS1 Real-Time Clock (RTC) and calendar optimized for low power
 consumption.</description>
 <wire x1="0" y1="17.78" x2="27.94" y2="17.78" width="0.254" layer="94"/>
@@ @@ -327,12 +383,28 @@ consumption.</description> @@
 <pin name="D+" x="-5.08" y="5.08" length="middle"/>
 <pin name="D-" x="-5.08" y="7.62" length="middle"/>
 <pin name="VCC" x="-5.08" y="10.16" length="middle"/>
 <text x="0" y="15.24" size="1.778" layer="95" rot="MR180">&gt;NAME</text>
 <text x="0" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 </symbol>
 <symbol name="CRYSTAL">
 <wire x1="1.016" y1="0" x2="2.54" y2="0" width="0.1524" layer="94"/>
 <wire x1="-2.54" y1="0" x2="-1.016" y2="0" width="0.1524" layer="94"/>
 <wire x1="-0.381" y1="1.524" x2="-0.381" y2="-1.524" width="0.254" layer="94"/>
 <wire x1="-0.381" y1="-1.524" x2="0.381" y2="-1.524" width="0.254" layer="94"/>
 <wire x1="0.381" y1="-1.524" x2="0.381" y2="1.524" width="0.254" layer="94"/>
 <wire x1="0.381" y1="1.524" x2="-0.381" y2="1.524" width="0.254" layer="94"/>
 <wire x1="1.016" y1="1.778" x2="1.016" y2="-1.778" width="0.254" layer="94"/>
 <wire x1="-1.016" y1="1.778" x2="-1.016" y2="-1.778" width="0.254" layer="94"/>
 <text x="2.54" y="1.016" size="1.778" layer="95">&gt;NAME</text>
 <text x="2.54" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 <text x="-2.159" y="-1.143" size="0.8636" layer="93">1</text>
 <text x="1.524" y="-1.143" size="0.8636" layer="93">2</text>
 <pin name="2" x="2.54" y="0" visible="off" length="point" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="1" x="-2.54" y="0" visible="off" length="point" direction="pas" swaplevel="1"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="PCF8523">
 <description>RTC</description>
 <gates>
 <gate name="G$1" symbol="PCF8523" x="0" y="0"/>
@@ @@ -526,10 +598,26 @@ i2c</description> @@
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="CRYSTAL">
 <gates>
 <gate name="G$1" symbol="CRYSTAL" x="0" y="0"/>
 </gates>
 <devices>
 <device name="" package="CRYS_3.2X1.5">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 </drawing>
 </eagle>

slave/eagle.epf

➞

Show inline comments

@@ @@ -4,12 +4,13 @@ Platform="Windows" @@
 Serial="62191E841E-LSR-WLM-1EL"
 Globals="Globals"
 Desktop="Desktop"
 [Globals]
 AutoSaveProject=1
 UsedLibrary="C:/Program Files (x86)/EAGLE-6.3.0/lbr/crystal.lbr"
 UsedLibrary="C:/Users/kripperger/Documents/eagle/seniordesign-hardware/lbr/adafruit.lbr"
 UsedLibrary="C:/Users/kripperger/Documents/eagle/seniordesign-hardware/lbr/dp_devices.lbr"
 UsedLibrary="C:/Users/kripperger/Documents/eagle/seniordesign-hardware/lbr/SeniorDesign.lbr"
 UsedLibrary="C:/Users/kripperger/Documents/eagle/seniordesign-hardware/lbr/SLAT-CON-JST-ZH.lbr"
 UsedLibrary="C:/Users/kripperger/Documents/eagle/seniordesign-hardware/lbr/SLAT-Connector SMD.lbr"
 UsedLibrary="C:/Users/kripperger/Documents/eagle/seniordesign-hardware/lbr/SLAT-Connector TH.lbr"

slave/slave.brd

➞

Show inline comments

@@ @@ -451,47 +451,12 @@ Basic SMA packaged diode. Good for rever @@
 <smd name="3" x="0" y="1.1" dx="0.8" dy="0.9" layer="1"/>
 <smd name="2" x="0.95" y="-1" dx="0.8" dy="0.9" layer="1"/>
 <smd name="1" x="-0.95" y="-1" dx="0.8" dy="0.9" layer="1"/>
 <text x="-0.8255" y="1.778" size="0.4064" layer="25">&gt;NAME</text>
 <text x="-1.016" y="-0.1905" size="0.4064" layer="27">&gt;VALUE</text>
 </package>
 <package name="TC26H">
 <description>&lt;b&gt;CRYSTAL&lt;/b&gt;</description>
 <wire x1="-0.889" y1="1.651" x2="0.889" y2="1.651" width="0.1524" layer="21"/>
 <wire x1="0.762" y1="7.747" x2="1.016" y2="7.493" width="0.1524" layer="21" curve="-90"/>
 <wire x1="-1.016" y1="7.493" x2="-0.762" y2="7.747" width="0.1524" layer="21" curve="-90"/>
 <wire x1="-0.762" y1="7.747" x2="0.762" y2="7.747" width="0.1524" layer="21"/>
 <wire x1="0.889" y1="1.651" x2="0.889" y2="2.032" width="0.1524" layer="21"/>
 <wire x1="1.016" y1="2.032" x2="1.016" y2="7.493" width="0.1524" layer="21"/>
 <wire x1="-0.889" y1="1.651" x2="-0.889" y2="2.032" width="0.1524" layer="21"/>
 <wire x1="-1.016" y1="2.032" x2="-0.889" y2="2.032" width="0.1524" layer="21"/>
 <wire x1="-1.016" y1="2.032" x2="-1.016" y2="7.493" width="0.1524" layer="21"/>
 <wire x1="0.508" y1="0.762" x2="0.508" y2="1.143" width="0.4064" layer="21"/>
 <wire x1="-0.508" y1="0.762" x2="-0.508" y2="1.27" width="0.4064" layer="21"/>
 <wire x1="0.635" y1="0.635" x2="1.27" y2="0" width="0.4064" layer="51"/>
 <wire x1="-0.635" y1="0.635" x2="-1.27" y2="0" width="0.4064" layer="51"/>
 <wire x1="-0.508" y1="4.953" x2="-0.508" y2="4.572" width="0.1524" layer="21"/>
 <wire x1="0.508" y1="4.572" x2="-0.508" y2="4.572" width="0.1524" layer="21"/>
 <wire x1="0.508" y1="4.572" x2="0.508" y2="4.953" width="0.1524" layer="21"/>
 <wire x1="-0.508" y1="4.953" x2="0.508" y2="4.953" width="0.1524" layer="21"/>
 <wire x1="-0.508" y1="5.334" x2="0" y2="5.334" width="0.1524" layer="21"/>
 <wire x1="-0.508" y1="4.191" x2="0" y2="4.191" width="0.1524" layer="21"/>
 <wire x1="0" y1="4.191" x2="0" y2="3.683" width="0.1524" layer="21"/>
 <wire x1="0" y1="4.191" x2="0.508" y2="4.191" width="0.1524" layer="21"/>
 <wire x1="0" y1="5.334" x2="0" y2="5.842" width="0.1524" layer="21"/>
 <wire x1="0" y1="5.334" x2="0.508" y2="5.334" width="0.1524" layer="21"/>
 <wire x1="1.016" y1="2.032" x2="0.889" y2="2.032" width="0.1524" layer="21"/>
 <wire x1="0.889" y1="2.032" x2="-0.889" y2="2.032" width="0.1524" layer="21"/>
 <pad name="1" x="-1.27" y="0" drill="0.8128" diameter="1.6764"/>
 <pad name="2" x="1.27" y="0" drill="0.8128" diameter="1.6764"/>
 <text x="-1.397" y="2.032" size="1.27" layer="25" ratio="10" rot="R90">&gt;NAME</text>
 <text x="2.667" y="2.032" size="1.27" layer="27" ratio="10" rot="R90">&gt;VALUE</text>
 <rectangle x1="0.3048" y1="1.016" x2="0.7112" y2="1.6002" layer="21"/>
 <rectangle x1="-0.7112" y1="1.016" x2="-0.3048" y2="1.6002" layer="21"/>
 <rectangle x1="-1.778" y1="0.762" x2="1.778" y2="8.382" layer="43"/>
 </package>
 </packages>
 </library>
 <library name="atmel">
 <description>&lt;b&gt;AVR Devices&lt;/b&gt;&lt;p&gt;
 Configurable logic, microcontrollers, nonvolatile memories&lt;p&gt;
 Based on the following sources:&lt;p&gt;
@@ @@ -676,12 +641,22 @@ Based on the following sources:<p> @@
 <rectangle x1="-1.11" y1="0.68" x2="-0.78" y2="1.43" layer="51"/>
 <rectangle x1="0.79" y1="0.67" x2="1.12" y2="1.42" layer="51"/>
 <rectangle x1="-1.11" y1="-1.42" x2="-0.78" y2="-0.67" layer="51"/>
 <rectangle x1="-0.16" y1="-1.42" x2="0.17" y2="-0.67" layer="51"/>
 <rectangle x1="0.79" y1="-1.42" x2="1.12" y2="-0.67" layer="51"/>
 </package>
 <package name="CRYS_3.2X1.5">
 <wire x1="-0.75" y1="1.6" x2="0.75" y2="1.6" width="0.127" layer="21"/>
 <wire x1="0.75" y1="1.6" x2="0.75" y2="-1.6" width="0.127" layer="21"/>
 <wire x1="0.75" y1="-1.6" x2="-0.75" y2="-1.6" width="0.127" layer="21"/>
 <wire x1="-0.75" y1="-1.6" x2="-0.75" y2="1.6" width="0.127" layer="21"/>
 <smd name="P$1" x="0" y="1.3" dx="1.9" dy="1.1" layer="1"/>
 <smd name="P$2" x="0" y="-1.3" dx="1.9" dy="1.1" layer="1"/>
 <text x="1.4" y="0.7" size="1.27" layer="25">&gt;NAME</text>
 <text x="1.3" y="-1.8" size="1.27" layer="27">&gt;VALUE</text>
 </package>
 </packages>
 </library>
 <library name="SLAT-CON-JST-ZH">
 <packages>
 <package name="ZH-H-2-1">
 <wire x1="2.98" y1="-1.4" x2="2.98" y2="4.6" width="0.254" layer="21"/>
@@ @@ -993,27 +968,27 @@ Please make sure your boards conform to @@
 <attribute name="NAME" x="12.7762" y="2.032" size="1.27" layer="25" ratio="10"/>
 <attribute name="VALUE" x="16.51" y="-0.635" size="1.27" layer="27"/>
 </element>
 <element name="C_CRYS2" library="SparkFun" package="0603-CAP" value="18pf" x="17.018" y="8.5852" rot="R90"/>
 <element name="C_CRYS1" library="SparkFun" package="0603-CAP" value="18pf" x="14.224" y="8.5852" rot="R90"/>
 <element name="Y2" library="SparkFun" package="CRYSTAL-SMD-5X3" value="11.0592MHz" x="15.0876" y="13.6652" rot="R90"/>
 <element name="C15" library="SparkFun" package="0603-CAP" value=".1uF" x="37.084" y="18.9992" rot="R180"/>
 <element name="L2" library="SparkFun" package="0603" value="10uH" x="37.084" y="16.8148"/>
 <element name="C15" library="SparkFun" package="0603-CAP" value=".1uF" x="37.084" y="20.1168" rot="R180"/>
 <element name="L2" library="SparkFun" package="0603" value="10uH" x="37.084" y="18.1356"/>
 <element name="C16" library="SparkFun" package="0603-CAP" value=".1uF" x="14.478" y="20.066" rot="R180"/>
 <element name="C17" library="SparkFun" package="0603-CAP" value=".1uF" x="37.084" y="21.2852"/>
 <element name="C18" library="SparkFun" package="0603-CAP" value="10uF" x="37.084" y="23.5712"/>
 <element name="C17" library="SparkFun" package="0603-CAP" value=".1uF" x="37.084" y="22.098"/>
 <element name="C18" library="SparkFun" package="0603-CAP" value="10uF" x="37.084" y="24.1808"/>
 <element name="ICSP" library="SparkFun" package="2X3-NS" value="AVR_SPI_PRG_6NS" x="5.334" y="28.5496"/>
 <element name="R_SCL" library="SparkFun" package="0603-RES" value="4.7k" x="13.9192" y="32.512" rot="R270"/>
 <element name="R_SDA" library="SparkFun" package="0603-RES" value="4.7k" x="17.272" y="32.512" rot="R270"/>
 <element name="ASSOC" library="adafruit" package="CHIPLED_0603" value="AMBER" x="5.08" y="18.796" rot="R90"/>
 <element name="R_ASSOC" library="SparkFun" package="0603-RES" value="10K" x="8.89" y="18.796"/>
-<element name="R9" library="SparkFun" package="0603-RES" value="10K" x="37.8968" y="13.0048"/>
+<element name="R9" library="SparkFun" package="0603-RES" value="10K" x="34.036" y="11.4808"/>
 <element name="R10" library="SparkFun" package="0603-RES" value="1M" x="41.8084" y="6.35"/>
 <element name="R_HEAT" library="SparkFun" package="R2512" value="" x="44.8056" y="13.716" smashed="yes" rot="R180">
 <attribute name="NAME" x="48.3616" y="16.7894" size="1.27" layer="25" rot="R180"/>
 <attribute name="VALUE" x="47.3456" y="16.891" size="1.27" layer="27" rot="R180"/>
 <element name="R_HEAT" library="SparkFun" package="R2512" value="" x="45.4152" y="13.716" smashed="yes" rot="R180">
 <attribute name="NAME" x="48.9712" y="16.7894" size="1.27" layer="25" rot="R180"/>
 <attribute name="VALUE" x="47.9552" y="16.891" size="1.27" layer="27" rot="R180"/>
 </element>
 <element name="C19" library="SparkFun" package="0603-CAP" value=".1uF" x="11.684" y="28.702" smashed="yes" rot="R270">
 <attribute name="NAME" x="12.446" y="29.591" size="0.4064" layer="25" font="vector" rot="R270"/>
 <attribute name="VALUE" x="10.541" y="29.718" size="0.4064" layer="27" font="vector" rot="R270"/>
 </element>
 <element name="Q1" library="SparkFun" package="SOT23-3" value="MOSFET-PCHANNELSMD" x="42.0116" y="9.652"/>
@@ @@ -1023,13 +998,15 @@ Please make sure your boards conform to @@
 <element name="R_LED2" library="SparkFun" package="0603-RES" value="10K" x="8.89" y="11.176"/>
 <element name="R_LED3" library="SparkFun" package="0603-RES" value="10K" x="8.89" y="8.636"/>
 <element name="LED0" library="adafruit" package="CHIPLED_0603" value="BLUE" x="5.08" y="16.256" rot="R90"/>
 <element name="LED1" library="adafruit" package="CHIPLED_0603" value="GREEN" x="5.08" y="13.716" rot="R90"/>
 <element name="LED2" library="adafruit" package="CHIPLED_0603" value="WHITE" x="5.08" y="11.176" rot="R90"/>
 <element name="LED3" library="adafruit" package="CHIPLED_0603" value="RED" x="5.08" y="8.636" rot="R90"/>
 <element name="Y1" library="SparkFun" package="TC26H" value="" x="-23.6728" y="-2.032"/>
 <element name="U$2" library="SeniorDesign" package="CRYS_3.2X1.5" value="32.768 kHz" x="36.4744" y="14.8336"/>
 <element name="C1" library="SparkFun" package="0603-CAP" value="9pF" x="39.116" y="16.0528"/>
 <element name="C2" library="SparkFun" package="0603-CAP" value="9pF" x="39.116" y="13.6144"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="U$1" pad="10"/>
 <contactref element="IC1" pad="18"/>
 <contactref element="IC1" pad="6"/>
@@ @@ -1088,14 +1065,14 @@ Please make sure your boards conform to @@
 <wire x1="14.224" y1="7.7352" x2="17.018" y2="7.7352" width="0.4064" layer="1"/>
 <wire x1="4.33" y1="8.636" x2="4.33" y2="11.176" width="0.4064" layer="1"/>
 <wire x1="4.33" y1="11.176" x2="4.33" y2="13.716" width="0.4064" layer="1"/>
 <wire x1="4.33" y1="13.716" x2="4.33" y2="16.256" width="0.4064" layer="1"/>
 <wire x1="4.33" y1="16.256" x2="4.33" y2="18.796" width="0.4064" layer="1"/>
 <wire x1="51.0032" y1="3.576" x2="51.054" y2="3.6268" width="0.6096" layer="1"/>
 <wire x1="37.934" y1="23.5712" x2="37.934" y2="21.2852" width="0.4064" layer="1"/>
 <wire x1="37.934" y1="21.2852" x2="37.934" y2="18.9992" width="0.4064" layer="1"/>
 <wire x1="37.934" y1="24.1808" x2="37.934" y2="22.098" width="0.4064" layer="1"/>
 <wire x1="37.934" y1="22.098" x2="37.934" y2="20.1168" width="0.4064" layer="1"/>
 <wire x1="45.085" y1="34.4805" x2="45.5803" y2="34.4805" width="0.4064" layer="1"/>
 <polygon width="0.4064" layer="16" isolate="0.254">
 <vertex x="-2.4384" y="42.2656"/>
 <vertex x="-2.4384" y="-2.4384"/>
 <vertex x="68.8848" y="-2.4384"/>
 <vertex x="68.8848" y="42.4688"/>
@@ @@ -1109,14 +1086,12 @@ Please make sure your boards conform to @@
 <vertex x="-3.048" y="42.8752"/>
 </polygon>
 <wire x1="47.53" y1="29.185" x2="47.5746" y2="29.185" width="0.8128" layer="16"/>
 <via x="51.1048" y="29.8704" extent="1-16" drill="0.6"/>
 <wire x1="51.1048" y1="29.8704" x2="51.1048" y2="28.5242" width="0.8128" layer="1"/>
 <wire x1="51.1048" y1="28.5242" x2="50.9016" y2="28.321" width="0.8128" layer="1"/>
 <wire x1="37.15" y1="10.752" x2="34.628" y2="10.752" width="0.4064" layer="1"/>
 <wire x1="34.628" y1="10.752" x2="33.8328" y2="9.9568" width="0.4064" layer="1"/>
 <wire x1="33.8328" y1="9.9568" x2="27.2288" y2="9.9568" width="0.4064" layer="1"/>
 <wire x1="27.2288" y1="9.9568" x2="26.1112" y2="11.0744" width="0.4064" layer="1"/>
 <wire x1="26.1112" y1="11.0744" x2="26.1112" y2="12.0688" width="0.4064" layer="1"/>
 <wire x1="26.1112" y1="12.0688" x2="26.073" y2="12.107" width="0.4064" layer="1"/>
 <wire x1="45.4796" y1="28.2448" x2="45.72" y2="28.282" width="0.4064" layer="1"/>
 <wire x1="14.2548" y1="28.6512" x2="14.204" y2="28.702" width="0.4064" layer="1"/>
@@ @@ -1126,24 +1101,26 @@ Please make sure your boards conform to @@
 <wire x1="55.4736" y1="26.416" x2="55.4736" y2="27.0256" width="0.8128" layer="1"/>
 <wire x1="55.4736" y1="27.0256" x2="53.026" y2="27.0256" width="0.8128" layer="1"/>
 <wire x1="53.026" y1="27.0256" x2="53.026" y2="27.051" width="0.8128" layer="1"/>
 <wire x1="25.273" y1="23.707" x2="25.26665" y2="22.0472" width="0.4064" layer="1"/>
 <wire x1="25.26665" y1="22.0472" x2="24.7904" y2="22.0472" width="0.4064" layer="1"/>
 <via x="24.7904" y="22.0472" extent="1-16" drill="0.254"/>
 <via x="43.5864" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="44.3992" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="45.212" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="46.0248" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="43.5864" y="13.716" extent="1-16" drill="0.381"/>
 <via x="44.3992" y="13.716" extent="1-16" drill="0.381"/>
 <via x="45.212" y="13.716" extent="1-16" drill="0.381"/>
 <via x="46.0248" y="13.716" extent="1-16" drill="0.381"/>
 <via x="43.5864" y="12.8016" extent="1-16" drill="0.381"/>
 <via x="44.3992" y="12.8016" extent="1-16" drill="0.381"/>
 <via x="45.212" y="12.8016" extent="1-16" drill="0.381"/>
 <via x="46.0248" y="12.8016" extent="1-16" drill="0.381"/>
 <via x="44.196" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="45.0088" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="45.8216" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="46.6344" y="14.6304" extent="1-16" drill="0.381"/>
 <via x="44.196" y="13.716" extent="1-16" drill="0.381"/>
 <via x="45.0088" y="13.716" extent="1-16" drill="0.381"/>
 <via x="45.8216" y="13.716" extent="1-16" drill="0.381"/>
 <via x="46.6344" y="13.716" extent="1-16" drill="0.381"/>
 <via x="44.196" y="12.8016" extent="1-16" drill="0.381"/>
 <via x="45.0088" y="12.8016" extent="1-16" drill="0.381"/>
 <via x="45.8216" y="12.8016" extent="1-16" drill="0.381"/>
 <via x="46.6344" y="12.8016" extent="1-16" drill="0.381"/>
 <contactref element="C2" pad="2"/>
 <contactref element="C1" pad="2"/>
 </signal>
 <signal name="VCC">
 <contactref element="IC1" pad="38"/>
 <contactref element="IC1" pad="17"/>
 <contactref element="IC1" pad="5"/>
 <contactref element="R1" pad="1"/>
@@ @@ -1182,27 +1159,25 @@ Please make sure your boards conform to @@
 <wire x1="24.13" y1="31.584" x2="21.844" y2="31.584" width="0.4064" layer="1"/>
 <wire x1="26.0096" y1="16.5608" x2="26.0096" y2="23.6436" width="0.4064" layer="1"/>
 <wire x1="26.0096" y1="23.6436" x2="26.073" y2="23.707" width="0.4064" layer="1"/>
 <wire x1="11.684" y1="29.552" x2="11.684" y2="29.5656" width="0.4064" layer="1"/>
 <wire x1="9.3472" y1="32.004" x2="4.9784" y2="32.004" width="0.4064" layer="1"/>
 <wire x1="25.1968" y1="12.1832" x2="25.273" y2="12.107" width="0.4064" layer="1"/>
-<wire x1="36.234" y1="23.5712" x2="36.234" y2="21.2852" width="0.4064" layer="1"/>
+<wire x1="36.234" y1="24.1808" x2="36.234" y2="22.098" width="0.4064" layer="1"/>
 <wire x1="2.794" y1="29.8196" x2="5.8928" y2="32.9184" width="0.4064" layer="16"/>
 <wire x1="5.8928" y1="32.9184" x2="25.8064" y2="32.9184" width="0.4064" layer="16"/>
 <via x="25.8064" y="32.9184" extent="1-16" drill="0.254"/>
 <wire x1="25.8064" y1="32.9184" x2="25.4644" y2="32.9184" width="0.4064" layer="1"/>
 <wire x1="25.4644" y1="32.9184" x2="24.13" y2="31.584" width="0.4064" layer="1"/>
 <wire x1="4.9784" y1="32.004" x2="2.794" y2="29.8196" width="0.4064" layer="1"/>
 <wire x1="17.272" y1="31.662" x2="21.766" y2="31.662" width="0.4064" layer="1"/>
 <wire x1="21.766" y1="31.662" x2="21.844" y2="31.584" width="0.4064" layer="1"/>
 <wire x1="53.026" y1="24.511" x2="52.1462" y2="24.511" width="0.4064" layer="1"/>
 <wire x1="52.1462" y1="24.511" x2="51.4096" y2="23.7744" width="0.4064" layer="1"/>
 <via x="51.4096" y="23.7744" extent="1-16" drill="0.254"/>
 <via x="39.116" y="24.6888" extent="1-16" drill="0.254"/>
 <via x="39.116" y="16.8656" extent="1-16" drill="0.254"/>
 <wire x1="39.116" y1="16.8656" x2="39.116" y2="24.6888" width="0.4064" layer="16"/>
 <via x="39.9288" y="24.6888" extent="1-16" drill="0.254"/>
 <wire x1="15.328" y1="20.066" x2="15.328" y2="20.232" width="0.4064" layer="1"/>
 <wire x1="15.328" y1="20.232" x2="14.0208" y2="21.5392" width="0.4064" layer="1"/>
 <wire x1="14.0208" y1="21.5392" x2="13.8176" y2="21.756" width="0.4064" layer="1"/>
 <wire x1="13.8176" y1="21.756" x2="13.628" y2="22.1488" width="0.4064" layer="1"/>
 <wire x1="9.3472" y1="32.004" x2="11.3792" y2="29.972" width="0.4064" layer="1"/>
 <wire x1="11.3792" y1="29.972" x2="11.3792" y2="29.8568" width="0.4064" layer="1"/>
@@ @@ -1225,13 +1200,13 @@ Please make sure your boards conform to @@
 <wire x1="2.032" y1="29.464" x2="2.6416" y2="29.972" width="0.4064" layer="1"/>
 <wire x1="2.6416" y1="29.972" x2="2.794" y2="29.8196" width="0.4064" layer="1"/>
 <wire x1="57.912" y1="16.002" x2="57.912" y2="27.2288" width="0.8128" layer="16"/>
 <wire x1="57.912" y1="27.2288" x2="50.6984" y2="34.4424" width="0.8128" layer="16"/>
 <wire x1="50.6984" y1="34.4424" x2="31.7874" y2="34.4424" width="0.8128" layer="16"/>
 <wire x1="31.7874" y1="34.4424" x2="29.53" y2="32.185" width="0.8128" layer="16"/>
-<wire x1="45.6184" y1="24.6888" x2="39.116" y2="24.6888" width="0.4064" layer="16"/>
+<wire x1="45.6184" y1="24.6888" x2="39.9288" y2="24.6888" width="0.4064" layer="16"/>
 <wire x1="57.912" y1="16.002" x2="56.8452" y2="16.002" width="0.4064" layer="16"/>
 <wire x1="56.8452" y1="16.002" x2="49.784" y2="23.0632" width="0.4064" layer="16"/>
 <wire x1="51.4096" y1="23.7744" x2="50.4952" y2="23.7744" width="0.4064" layer="16"/>
 <wire x1="50.4952" y1="23.7744" x2="49.784" y2="23.0632" width="0.4064" layer="16"/>
 <wire x1="49.784" y1="23.0632" x2="47.244" y2="23.0632" width="0.4064" layer="16"/>
 <wire x1="47.244" y1="23.0632" x2="45.6184" y2="24.6888" width="0.4064" layer="16"/>
@@ @@ -1248,17 +1223,18 @@ Please make sure your boards conform to @@
 <wire x1="1.1176" y1="28.5496" x2="1.16256875" y2="28.5496" width="0.4064" layer="16"/>
 <wire x1="1.16256875" y1="28.5496" x2="2.301821875" y2="29.688853125" width="0.4064" layer="16"/>
 <wire x1="2.301821875" y1="29.688853125" x2="2.663253125" y2="29.688853125" width="0.4064" layer="16"/>
 <wire x1="2.663253125" y1="29.688853125" x2="2.794" y2="29.8196" width="0.4064" layer="16"/>
 <wire x1="11.0744" y1="5.4864" x2="8.8392" y2="7.7216" width="0.4064" layer="16"/>
 <wire x1="21.2344" y1="5.4864" x2="22.86" y2="3.8608" width="0.4064" layer="16"/>
 <wire x1="37.934" y1="16.8148" x2="39.0652" y2="16.8148" width="0.4064" layer="1"/>
 <wire x1="39.0652" y1="16.8148" x2="39.116" y2="16.8656" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="23.5712" x2="36.234" y2="24.3468" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="24.3468" x2="36.576" y2="24.6888" width="0.4064" layer="1"/>
 <wire x1="36.576" y1="24.6888" x2="39.116" y2="24.6888" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="24.1808" x2="36.234" y2="24.3468" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="24.3468" x2="36.9824" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="36.9824" y1="25.0952" x2="39.5224" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="39.5224" y1="25.0952" x2="39.9288" y2="24.6888" width="0.4064" layer="1"/>
 <wire x1="37.934" y1="18.1356" x2="39.9288" y2="18.1356" width="0.4064" layer="1"/>
 <wire x1="39.9288" y1="18.1356" x2="39.9288" y2="24.6888" width="0.4064" layer="1"/>
 </signal>
 <signal name="RESET">
 <contactref element="R1" pad="2"/>
 <contactref element="IC1" pad="4"/>
 <contactref element="ICSP" pad="5"/>
 <wire x1="19.473" y1="19.507" x2="17.7802" y2="19.507" width="0.4064" layer="1"/>
@@ @@ -1557,25 +1533,25 @@ Please make sure your boards conform to @@
 <wire x1="18.6944" y1="16.256" x2="19.422" y2="16.256" width="0.4064" layer="1"/>
 <wire x1="19.422" y1="16.256" x2="19.473" y2="16.307" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$12">
 <contactref element="C15" pad="2"/>
 <contactref element="IC1" pad="29"/>
 <wire x1="31.073" y1="18.707" x2="34.455" y2="18.707" width="0.4064" layer="1"/>
 <wire x1="34.455" y1="18.707" x2="34.7472" y2="18.9992" width="0.4064" layer="1"/>
 <wire x1="34.7472" y1="18.9992" x2="36.234" y2="18.9992" width="0.4064" layer="1"/>
 <wire x1="31.073" y1="18.707" x2="33.6422" y2="18.707" width="0.4064" layer="1"/>
 <wire x1="33.6422" y1="18.707" x2="35.052" y2="20.1168" width="0.4064" layer="1"/>
 <wire x1="35.052" y1="20.1168" x2="36.234" y2="20.1168" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$13">
 <contactref element="L2" pad="1"/>
 <contactref element="IC1" pad="27"/>
 <wire x1="31.1112" y1="17.0688" x2="31.073" y2="17.107" width="0.4064" layer="1"/>
 <wire x1="35.98" y1="17.0688" x2="36.234" y2="16.8148" width="0.4064" layer="1"/>
 <wire x1="31.1112" y1="17.0688" x2="34.4424" y2="17.0688" width="0.4064" layer="1"/>
 <wire x1="34.4424" y1="17.0688" x2="34.7472" y2="16.764" width="0.4064" layer="1"/>
 <wire x1="34.7472" y1="16.764" x2="36.1832" y2="16.764" width="0.4064" layer="1"/>
 <wire x1="36.1832" y1="16.764" x2="36.234" y2="16.8148" width="0.4064" layer="1"/>
 <wire x1="31.1112" y1="17.0688" x2="33.9344" y2="17.0688" width="0.4064" layer="1"/>
 <wire x1="36.1832" y1="18.0848" x2="36.234" y2="18.1356" width="0.4064" layer="1"/>
 <wire x1="33.9344" y1="17.0688" x2="35.052" y2="18.1864" width="0.4064" layer="1"/>
 <wire x1="35.052" y1="18.1864" x2="36.1832" y2="18.1864" width="0.4064" layer="1"/>
 <wire x1="36.1832" y1="18.1864" x2="36.234" y2="18.1356" width="0.4064" layer="1"/>
 </signal>
 <signal name="RXD0">
 <contactref element="IC1" pad="9"/>
 <contactref element="U$1" pad="2"/>
 <via x="20.9296" y="15.5448" extent="1-16" drill="0.254"/>
 <wire x1="20.9296" y1="15.5448" x2="20.9296" y2="22.0472" width="0.4064" layer="16"/>
@@ @@ -1642,15 +1618,15 @@ Please make sure your boards conform to @@
 <wire x1="24.9936" y1="6.7056" x2="30.1752" y2="6.7056" width="0.4064" layer="1"/>
 <wire x1="33.02" y1="2.667" x2="33.02" y2="3.8608" width="0.4064" layer="1"/>
 <wire x1="33.02" y1="3.8608" x2="30.1752" y2="6.7056" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP1">
 <contactref element="ROTARY_DIP" pad="2"/>
 <wire x1="32.4104" y1="21.7424" x2="37.3888" y2="26.7208" width="0.4064" layer="16"/>
 <via x="37.3888" y="26.7208" extent="1-16" drill="0.254"/>
 <wire x1="37.3888" y1="26.7208" x2="43.7896" y2="33.1216" width="0.4064" layer="1"/>
 <wire x1="32.4104" y1="21.7424" x2="37.4904" y2="26.8224" width="0.4064" layer="16"/>
 <via x="37.4904" y="26.8224" extent="1-16" drill="0.254"/>
 <wire x1="37.4904" y1="26.8224" x2="43.7896" y2="33.1216" width="0.4064" layer="1"/>
 <wire x1="43.7896" y1="33.1216" x2="52.7304" y2="33.1216" width="0.4064" layer="1"/>
 <wire x1="52.7304" y1="33.1216" x2="53.5432" y2="32.3088" width="0.4064" layer="1"/>
 <wire x1="53.5432" y1="32.3088" x2="53.9877" y2="32.3088" width="0.4064" layer="1"/>
 <wire x1="53.9877" y1="32.3088" x2="54.356" y2="31.9405" width="0.4064" layer="1"/>
 <contactref element="IC1" pad="22"/>
 <wire x1="32.4104" y1="21.7424" x2="32.4104" y2="17.0688" width="0.4064" layer="16"/>
@@ @@ -1658,15 +1634,15 @@ Please make sure your boards conform to @@
 <via x="29.2608" y="13.9192" extent="1-16" drill="0.254"/>
 <wire x1="29.2608" y1="13.9192" x2="29.2608" y2="12.1192" width="0.4064" layer="1"/>
 <wire x1="29.2608" y1="12.1192" x2="29.273" y2="12.107" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP3">
 <contactref element="ROTARY_DIP" pad="8"/>
 <wire x1="33.8328" y1="21.1328" x2="39.4208" y2="26.7208" width="0.4064" layer="16"/>
 <via x="39.4208" y="26.7208" extent="1-16" drill="0.254"/>
 <wire x1="39.4208" y1="26.7208" x2="42.3672" y2="29.6672" width="0.4064" layer="1"/>
 <wire x1="33.8328" y1="21.1328" x2="39.5224" y2="26.8224" width="0.4064" layer="16"/>
 <via x="39.5224" y="26.8224" extent="1-16" drill="0.254"/>
 <wire x1="39.5224" y1="26.8224" x2="42.3672" y2="29.6672" width="0.4064" layer="1"/>
 <wire x1="42.3672" y1="29.6672" x2="45.6184" y2="29.6672" width="0.4064" layer="1"/>
 <wire x1="45.6184" y1="29.6672" x2="47.752" y2="31.8008" width="0.4064" layer="1"/>
 <wire x1="47.752" y1="31.8008" x2="51.816" y2="31.8008" width="0.4064" layer="1"/>
 <wire x1="51.816" y1="31.8008" x2="53.34" y2="30.2768" width="0.4064" layer="1"/>
 <wire x1="53.34" y1="30.2768" x2="55.9816" y2="30.2768" width="0.4064" layer="1"/>
 <wire x1="56.7944" y1="31.0896" x2="56.7944" y2="35.052" width="0.4064" layer="1"/>
@@ @@ -1679,30 +1655,30 @@ Please make sure your boards conform to @@
 <via x="33.8328" y="14.732" extent="1-16" drill="0.254"/>
 <wire x1="33.8328" y1="14.732" x2="31.098" y2="14.732" width="0.4064" layer="1"/>
 <wire x1="31.098" y1="14.732" x2="31.073" y2="14.707" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP2">
 <contactref element="ROTARY_DIP" pad="4"/>
 <wire x1="33.1216" y1="21.4376" x2="38.4048" y2="26.7208" width="0.4064" layer="16"/>
 <via x="38.4048" y="26.7208" extent="1-16" drill="0.254"/>
 <wire x1="38.4048" y1="26.7208" x2="42.3672" y2="30.6832" width="0.4064" layer="1"/>
 <wire x1="33.1216" y1="21.4376" x2="38.5064" y2="26.8224" width="0.4064" layer="16"/>
 <via x="38.5064" y="26.8224" extent="1-16" drill="0.254"/>
 <wire x1="38.5064" y1="26.8224" x2="42.3672" y2="30.6832" width="0.4064" layer="1"/>
 <wire x1="42.3672" y1="30.6832" x2="43.4848" y2="30.6832" width="0.4064" layer="1"/>
 <wire x1="43.4848" y1="30.6832" x2="44.5008" y2="31.6992" width="0.4064" layer="1"/>
 <wire x1="44.5008" y1="31.6992" x2="44.8437" y2="31.6992" width="0.4064" layer="1"/>
 <wire x1="44.8437" y1="31.6992" x2="45.085" y2="31.9405" width="0.4064" layer="1"/>
 <contactref element="IC1" pad="23"/>
 <wire x1="33.1216" y1="21.4376" x2="33.1216" y2="13.9192" width="0.4064" layer="16"/>
 <via x="33.1216" y="13.9192" extent="1-16" drill="0.254"/>
 <wire x1="33.1216" y1="13.9192" x2="31.0852" y2="13.9192" width="0.4064" layer="1"/>
 <wire x1="31.0852" y1="13.9192" x2="31.073" y2="13.907" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP0">
 <contactref element="ROTARY_DIP" pad="1"/>
 <wire x1="31.6992" y1="22.0472" x2="36.3728" y2="26.7208" width="0.4064" layer="16"/>
 <via x="36.3728" y="26.7208" extent="1-16" drill="0.254"/>
 <wire x1="36.3728" y1="26.7208" x2="42.7736" y2="33.1216" width="0.4064" layer="1"/>
 <wire x1="31.6992" y1="22.0472" x2="36.4744" y2="26.8224" width="0.4064" layer="16"/>
 <via x="36.4744" y="26.8224" extent="1-16" drill="0.254"/>
 <wire x1="36.4744" y1="26.8224" x2="42.7736" y2="33.1216" width="0.4064" layer="1"/>
 <wire x1="42.7736" y1="33.1216" x2="42.7736" y2="35.052" width="0.4064" layer="1"/>
 <wire x1="42.7736" y1="35.052" x2="44.0944" y2="36.3728" width="0.4064" layer="1"/>
 <wire x1="44.0944" y1="36.3728" x2="44.4373" y2="36.7792" width="0.4064" layer="1"/>
 <wire x1="44.4373" y1="36.7792" x2="45.085" y2="37.0205" width="0.4064" layer="1"/>
 <contactref element="IC1" pad="21"/>
 <wire x1="31.6992" y1="22.0472" x2="31.6992" y2="17.3736" width="0.4064" layer="16"/>
@@ @@ -1786,20 +1762,23 @@ Please make sure your boards conform to @@
 <contactref element="ASSOC" pad="A"/>
 <wire x1="5.83" y1="18.796" x2="8.04" y2="18.796" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$8">
 <contactref element="Q2" pad="B"/>
 <contactref element="R9" pad="2"/>
 <wire x1="39.05" y1="10.752" x2="39.05" y2="12.7016" width="0.4064" layer="1"/>
 <wire x1="39.05" y1="12.7016" x2="38.7468" y2="13.0048" width="0.4064" layer="1"/>
 <wire x1="39.05" y1="10.752" x2="39.05" y2="11.8516" width="0.4064" layer="1"/>
 <wire x1="39.05" y1="11.8516" x2="38.7096" y2="12.192" width="0.4064" layer="1"/>
 <wire x1="38.7096" y1="12.192" x2="35.5972" y2="12.192" width="0.4064" layer="1"/>
 <wire x1="35.5972" y1="12.192" x2="34.886" y2="11.4808" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$9">
 <contactref element="Q1" pad="3"/>
 <contactref element="R_HEAT" pad="2"/>
 <wire x1="42.0116" y1="10.752" x2="42.0056" y2="10.752" width="0.6096" layer="1"/>
 <wire x1="42.0056" y1="10.752" x2="42.0056" y2="13.716" width="0.6096" layer="1"/>
 <wire x1="42.0056" y1="10.752" x2="42.0056" y2="13.1064" width="0.6096" layer="1"/>
 <wire x1="42.0056" y1="13.1064" x2="42.6152" y2="13.716" width="0.6096" layer="1"/>
 </signal>
 <signal name="N$14">
 <contactref element="Q2" pad="C"/>
 <contactref element="R10" pad="1"/>
 <contactref element="Q1" pad="1"/>
 <wire x1="38.1" y1="8.552" x2="41.0616" y2="8.552" width="0.4064" layer="1"/>
@@ @@ -1811,19 +1790,19 @@ Please make sure your boards conform to @@
 <contactref element="R9" pad="1"/>
 <contactref element="IC1" pad="44"/>
 <wire x1="21.273" y1="23.707" x2="21.273" y2="22.6182" width="0.4064" layer="1"/>
 <wire x1="21.273" y1="22.6182" x2="22.1488" y2="21.7424" width="0.4064" layer="1"/>
 <wire x1="22.1488" y1="21.7424" x2="23.6728" y2="21.7424" width="0.4064" layer="1"/>
 <via x="23.6728" y="21.7424" extent="1-16" drill="0.254"/>
 <via x="35.1536" y="13.0048" extent="1-16" drill="0.254"/>
 <wire x1="35.1536" y1="13.0048" x2="37.0468" y2="13.0048" width="0.4064" layer="1"/>
 <via x="31.5976" y="11.4808" extent="1-16" drill="0.254"/>
 <wire x1="31.5976" y1="11.4808" x2="33.186" y2="11.4808" width="0.4064" layer="1"/>
 <wire x1="25.908" y1="13.208" x2="25.908" y2="19.5072" width="0.4064" layer="16"/>
 <wire x1="25.908" y1="19.5072" x2="23.6728" y2="21.7424" width="0.4064" layer="16"/>
 <wire x1="35.1536" y1="13.0048" x2="34.036" y2="11.8872" width="0.4064" layer="16"/>
 <wire x1="34.036" y1="11.8872" x2="27.2288" y2="11.8872" width="0.4064" layer="16"/>
 <wire x1="27.2288" y1="11.8872" x2="25.908" y2="13.208" width="0.4064" layer="16"/>
 <wire x1="25.908" y1="13.208" x2="26.924" y2="12.192" width="0.4064" layer="16"/>
 <wire x1="26.924" y1="12.192" x2="30.8864" y2="12.192" width="0.4064" layer="16"/>
 <wire x1="30.8864" y1="12.192" x2="31.5976" y2="11.4808" width="0.4064" layer="16"/>
 </signal>
 <signal name="N$1">
 <contactref element="R_LED0" pad="1"/>
 <contactref element="LED0" pad="A"/>
 <wire x1="5.83" y1="16.256" x2="8.04" y2="16.256" width="0.4064" layer="1"/>
 </signal>
@@ @@ -1987,34 +1966,26 @@ Please make sure your boards conform to @@
 <vertex x="38.7096" y="9.2456"/>
 <vertex x="38.84295" y="9.2456"/>
 <vertex x="38.84295" y="9.8552"/>
 <vertex x="38.7096" y="9.8552"/>
 </polygon>
 </signal>
 <signal name="N$38">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="37.6936" y="11.684"/>
 <vertex x="38.5064" y="11.684"/>
 <vertex x="38.51275" y="11.36015"/>
 <vertex x="37.69995" y="11.36015"/>
 </polygon>
 </signal>
 <signal name="N$39">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="37.68725" y="12.26185"/>
 <vertex x="37.6936" y="12.3952"/>
 <vertex x="38.1" y="12.3952"/>
 <vertex x="38.09365" y="12.26185"/>
 <vertex x="33.82645" y="10.73785"/>
 <vertex x="33.8328" y="10.8712"/>
 <vertex x="34.2392" y="10.8712"/>
 <vertex x="34.23285" y="10.73785"/>
 </polygon>
 </signal>
 <signal name="N$40">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="37.592" y="13.74775"/>
 <vertex x="37.592" y="13.6144"/>
 <vertex x="38.2016" y="13.6144"/>
 <vertex x="38.2016" y="13.74775"/>
 <vertex x="33.7312" y="12.22375"/>
 <vertex x="33.7312" y="12.0904"/>
 <vertex x="34.3408" y="12.0904"/>
 <vertex x="34.3408" y="12.22375"/>
 </polygon>
 </signal>
 <signal name="N$41">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="10.94105" y="28.956"/>
 <vertex x="11.0744" y="28.956"/>
@@ @@ -2233,64 +2204,64 @@ Please make sure your boards conform to @@
 <vertex x="16.27505" y="10.668"/>
 <vertex x="16.4592" y="10.668"/>
 </polygon>
 </signal>
 <signal name="N$61">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="37.3888" y="22.9616"/>
 <vertex x="36.8808" y="22.9616"/>
 <vertex x="36.8808" y="22.82825"/>
 <vertex x="37.3888" y="22.82825"/>
 <vertex x="37.3888" y="23.5712"/>
 <vertex x="36.8808" y="23.5712"/>
 <vertex x="36.8808" y="23.43785"/>
 <vertex x="37.3888" y="23.43785"/>
 </polygon>
 </signal>
 <signal name="N$62">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="22.02815"/>
 <vertex x="36.8808" y="21.9456"/>
 <vertex x="37.3888" y="21.9456"/>
 <vertex x="37.3888" y="22.02815"/>
 <vertex x="36.8808" y="22.84095"/>
 <vertex x="36.8808" y="22.7584"/>
 <vertex x="37.3888" y="22.7584"/>
 <vertex x="37.3888" y="22.84095"/>
 </polygon>
 </signal>
 <signal name="N$63">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="16.1544"/>
 <vertex x="36.8808" y="16.07185"/>
 <vertex x="37.2872" y="16.07185"/>
 <vertex x="37.2872" y="16.1544"/>
 <vertex x="36.8808" y="17.4752"/>
 <vertex x="36.8808" y="17.39265"/>
 <vertex x="37.2872" y="17.39265"/>
 <vertex x="37.2872" y="17.4752"/>
 </polygon>
 </signal>
 <signal name="N$64">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="17.55775"/>
 <vertex x="36.8808" y="17.4752"/>
 <vertex x="37.2872" y="17.4752"/>
 <vertex x="37.2872" y="17.55775"/>
 <vertex x="36.8808" y="18.87855"/>
 <vertex x="36.8808" y="18.796"/>
 <vertex x="37.2872" y="18.796"/>
 <vertex x="37.2872" y="18.87855"/>
 </polygon>
 </signal>
 <signal name="N$65">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="18.3896"/>
 <vertex x="36.8808" y="18.25625"/>
 <vertex x="37.2872" y="18.25625"/>
 <vertex x="37.2872" y="18.3896"/>
 <vertex x="36.8808" y="19.5072"/>
 <vertex x="36.8808" y="19.37385"/>
 <vertex x="37.2872" y="19.37385"/>
 <vertex x="37.2872" y="19.5072"/>
 </polygon>
 </signal>
 <signal name="N$66">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="19.74215"/>
 <vertex x="36.8808" y="19.6088"/>
 <vertex x="37.3888" y="19.6088"/>
 <vertex x="37.3888" y="19.74215"/>
 <vertex x="36.8808" y="20.85975"/>
 <vertex x="36.8808" y="20.7264"/>
 <vertex x="37.3888" y="20.7264"/>
 <vertex x="37.3888" y="20.85975"/>
 </polygon>
 </signal>
 <signal name="N$67">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="20.6248"/>
 <vertex x="36.8808" y="20.54225"/>
 <vertex x="37.2872" y="20.54225"/>
 <vertex x="37.2872" y="20.6248"/>
 <vertex x="36.8808" y="21.4376"/>
 <vertex x="36.8808" y="21.35505"/>
 <vertex x="37.2872" y="21.35505"/>
 <vertex x="37.2872" y="21.4376"/>
 </polygon>
 </signal>
 <signal name="N$68">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="55.372" y="31.1912"/>
 <vertex x="55.372" y="30.6832"/>
@@ @@ -2299,20 +2270,12 @@ Please make sure your boards conform to @@
 <vertex x="56.1848" y="30.8864"/>
 <vertex x="56.1848" y="31.0896"/>
 <vertex x="56.388" y="31.0896"/>
 <vertex x="56.388" y="31.1912"/>
 </polygon>
 </signal>
 <signal name="N$69">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="38.5064" y="23.9776"/>
 <vertex x="38.72865" y="23.9776"/>
 <vertex x="38.72865" y="23.368"/>
 <vertex x="38.5064" y="23.368"/>
 </polygon>
 </signal>
 <signal name="N$70">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="44.97705" y="29.1592"/>
 <vertex x="44.97705" y="28.8544"/>
 <vertex x="45.1104" y="28.8544"/>
 <vertex x="45.1104" y="29.1592"/>
@@ @@ -2451,15 +2414,78 @@ Please make sure your boards conform to @@
 <vertex x="53.4416" y="8.636"/>
 <vertex x="53.4416" y="8.7376"/>
 </polygon>
 </signal>
 <signal name="TOSC1">
 <contactref element="IC1" pad="25"/>
 <contactref element="U$2" pad="P$2"/>
 <contactref element="C2" pad="1"/>
 <wire x1="36.4744" y1="13.5336" x2="38.266" y2="13.5336" width="0.4064" layer="1"/>
 <wire x1="38.266" y1="13.5336" x2="38.266" y2="13.6144" width="0.4064" layer="1"/>
 <wire x1="31.073" y1="15.507" x2="34.3786" y2="15.507" width="0.4064" layer="1"/>
 <wire x1="34.3786" y1="15.507" x2="35.8648" y2="14.0208" width="0.4064" layer="1"/>
 <wire x1="35.8648" y1="14.0208" x2="36.1904" y2="13.716" width="0.4064" layer="1"/>
 <wire x1="36.1904" y1="13.716" x2="36.4744" y2="13.5336" width="0.4064" layer="1"/>
 </signal>
 <signal name="TOSC2">
 <contactref element="IC1" pad="26"/>
 <contactref element="U$2" pad="P$1"/>
 <contactref element="C1" pad="1"/>
 <wire x1="36.4744" y1="16.1336" x2="38.266" y2="16.1336" width="0.4064" layer="1"/>
 <wire x1="38.266" y1="16.1336" x2="38.266" y2="16.0528" width="0.4064" layer="1"/>
 <wire x1="31.073" y1="16.307" x2="36.4744" y2="16.307" width="0.4064" layer="1"/>
 <wire x1="36.4744" y1="16.307" x2="36.4744" y2="16.1336" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$38">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="38.91915" y="16.79575"/>
 <vertex x="38.91915" y="16.6624"/>
 <vertex x="39.35095" y="16.6624"/>
 <vertex x="39.35095" y="16.79575"/>
 </polygon>
 </signal>
 <signal name="N$69">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="38.9128" y="15.4432"/>
 <vertex x="38.9128" y="15.30985"/>
 <vertex x="39.36365" y="15.30985"/>
 <vertex x="39.36365" y="15.4432"/>
 </polygon>
 </signal>
 <signal name="N$87">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="38.9128" y="13.0048"/>
 <vertex x="38.9128" y="12.87145"/>
 <vertex x="39.36365" y="12.87145"/>
 <vertex x="39.36365" y="13.0048"/>
 </polygon>
 </signal>
 <signal name="N$88">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="38.91915" y="14.35735"/>
 <vertex x="38.91915" y="14.224"/>
 <vertex x="39.35095" y="14.224"/>
 <vertex x="39.35095" y="14.35735"/>
 </polygon>
 </signal>
 <signal name="N$89">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="39.49065" y="12.0396"/>
 <vertex x="39.79545" y="11.7348"/>
 <vertex x="39.49065" y="11.7348"/>
 <vertex x="39.38905" y="11.8364"/>
 <vertex x="39.38905" y="11.938"/>
 </polygon>
 </signal>
 <signal name="N$90">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="35.3568" y="12.9032"/>
 <vertex x="35.3568" y="12.4968"/>
 <vertex x="35.2806" y="12.4968"/>
 <vertex x="35.2806" y="12.9032"/>
 </polygon>
 </signal>
 </signals>
 </board>
 </drawing>
 <compatibility>
 <note version="6.3" minversion="6.2.2" severity="warning">

slave/slave.sch

➞

Show inline comments

@@ @@ -3154,12 +3154,22 @@ Source: http://www.atmel.com/dyn/resourc @@
 <rectangle x1="-1.11" y1="0.68" x2="-0.78" y2="1.43" layer="51"/>
 <rectangle x1="0.79" y1="0.67" x2="1.12" y2="1.42" layer="51"/>
 <rectangle x1="-1.11" y1="-1.42" x2="-0.78" y2="-0.67" layer="51"/>
 <rectangle x1="-0.16" y1="-1.42" x2="0.17" y2="-0.67" layer="51"/>
 <rectangle x1="0.79" y1="-1.42" x2="1.12" y2="-0.67" layer="51"/>
 </package>
 <package name="CRYS_3.2X1.5">
 <wire x1="-0.75" y1="1.6" x2="0.75" y2="1.6" width="0.127" layer="21"/>
 <wire x1="0.75" y1="1.6" x2="0.75" y2="-1.6" width="0.127" layer="21"/>
 <wire x1="0.75" y1="-1.6" x2="-0.75" y2="-1.6" width="0.127" layer="21"/>
 <wire x1="-0.75" y1="-1.6" x2="-0.75" y2="1.6" width="0.127" layer="21"/>
 <smd name="P$1" x="0" y="1.3" dx="1.9" dy="1.1" layer="1"/>
 <smd name="P$2" x="0" y="-1.3" dx="1.9" dy="1.1" layer="1"/>
 <text x="1.4" y="0.7" size="1.27" layer="25">&gt;NAME</text>
 <text x="1.3" y="-1.8" size="1.27" layer="27">&gt;VALUE</text>
 </package>
 </packages>
 <symbols>
 <symbol name="IFX91041EJ">
 <wire x1="-10.16" y1="7.62" x2="-10.16" y2="-7.62" width="0.254" layer="94"/>
 <wire x1="-10.16" y1="-7.62" x2="10.16" y2="-7.62" width="0.254" layer="94"/>
 <wire x1="10.16" y1="-7.62" x2="10.16" y2="7.62" width="0.254" layer="94"/>
@@ @@ -3200,12 +3210,28 @@ Source: http://www.atmel.com/dyn/resourc @@
 <pin name="ALERT" x="20.32" y="5.08" length="middle" rot="R180"/>
 <pin name="SDA" x="20.32" y="0" length="middle" rot="R180"/>
 <pin name="SCL" x="20.32" y="-2.54" length="middle" rot="R180"/>
 <text x="-5.08" y="10.16" size="1.27" layer="95" rot="MR180">&gt;NAME</text>
 <text x="-5.08" y="-7.62" size="1.27" layer="96">&gt;VALUE</text>
 </symbol>
 <symbol name="CRYSTAL">
 <wire x1="1.016" y1="0" x2="2.54" y2="0" width="0.1524" layer="94"/>
 <wire x1="-2.54" y1="0" x2="-1.016" y2="0" width="0.1524" layer="94"/>
 <wire x1="-0.381" y1="1.524" x2="-0.381" y2="-1.524" width="0.254" layer="94"/>
 <wire x1="-0.381" y1="-1.524" x2="0.381" y2="-1.524" width="0.254" layer="94"/>
 <wire x1="0.381" y1="-1.524" x2="0.381" y2="1.524" width="0.254" layer="94"/>
 <wire x1="0.381" y1="1.524" x2="-0.381" y2="1.524" width="0.254" layer="94"/>
 <wire x1="1.016" y1="1.778" x2="1.016" y2="-1.778" width="0.254" layer="94"/>
 <wire x1="-1.016" y1="1.778" x2="-1.016" y2="-1.778" width="0.254" layer="94"/>
 <text x="2.54" y="1.016" size="1.778" layer="95">&gt;NAME</text>
 <text x="2.54" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 <text x="-2.159" y="-1.143" size="0.8636" layer="93">1</text>
 <text x="1.524" y="-1.143" size="0.8636" layer="93">2</text>
 <pin name="2" x="2.54" y="0" visible="off" length="point" direction="pas" swaplevel="1" rot="R180"/>
 <pin name="1" x="-2.54" y="0" visible="off" length="point" direction="pas" swaplevel="1"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="IFX91041EJ">
 <gates>
 <gate name="G$1" symbol="IFX91041EJ" x="0" y="0"/>
 </gates>
@@ @@ -3263,12 +3289,28 @@ Source: http://www.atmel.com/dyn/resourc @@
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="CRYSTAL">
 <gates>
 <gate name="G$1" symbol="CRYSTAL" x="0" y="0"/>
 </gates>
 <devices>
 <device name="" package="CRYS_3.2X1.5">
 <connects>
 <connect gate="G$1" pin="1" pad="P$1"/>
 <connect gate="G$1" pin="2" pad="P$2"/>
 </connects>
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
 </library>
 <library name="SLAT-CON-JST-ZH">
 <packages>
 <package name="ZH-H-2-1">
 <wire x1="2.98" y1="-1.4" x2="2.98" y2="4.6" width="0.254" layer="21"/>
@@ @@ -4781,13 +4823,16 @@ Source: http://www.osram.convergy.de/</d @@
 <part name="LED3" library="adafruit" deviceset="LED" device="CHIPLED_0603" value="RED"/>
 <part name="GND18" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND19" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND20" library="SparkFun" deviceset="GND" device=""/>
 <part name="GND21" library="SparkFun" deviceset="GND" device=""/>
 <part name="P+2" library="SparkFun" deviceset="VCC" device=""/>
 <part name="Y1" library="SparkFun" deviceset="CRYSTAL" device="TC26H"/>
 <part name="U$2" library="SeniorDesign" deviceset="CRYSTAL" device="" value="32.768 kHz"/>
 <part name="C1" library="SparkFun" deviceset="CAP" device="0603-CAP" value="9pF"/>
 <part name="C2" library="SparkFun" deviceset="CAP" device="0603-CAP" value="9pF"/>
 <part name="GND22" library="SparkFun" deviceset="GND" device=""/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <text x="162.814" y="26.416" size="5.08" layer="94" font="vector">Slave Motherboard</text>
 <wire x1="0" y1="53.34" x2="76.2" y2="53.34" width="0.4064" layer="94"/>
@@ @@ -4952,13 +4997,16 @@ Source: http://www.osram.convergy.de/</d @@
 <instance part="GND19" gate="1" x="30.48" y="116.84"/>
 <instance part="GND20" gate="1" x="22.86" y="116.84"/>
 <instance part="GND21" gate="1" x="15.24" y="116.84"/>
 <instance part="P+2" gate="1" x="7.62" y="83.82" smashed="yes">
 <attribute name="VALUE" x="1.524" y="84.836" size="1.778" layer="96"/>
 </instance>
 <instance part="Y1" gate="G$1" x="149.86" y="76.2"/>
 <instance part="U$2" gate="G$1" x="198.12" y="53.34" rot="R90"/>
 <instance part="C1" gate="G$1" x="187.96" y="48.26" rot="R270"/>
 <instance part="C2" gate="G$1" x="187.96" y="58.42" rot="R270"/>
 <instance part="GND22" gate="1" x="180.34" y="43.18"/>
 </instances>
 <busses>
 </busses>
 <nets>
 <net name="VCC" class="0">
 <segment>
@@ @@ -5263,12 +5311,22 @@ Source: http://www.osram.convergy.de/</d @@
 <pinref part="C19" gate="G$1" pin="2"/>
 <wire x1="86.36" y1="60.96" x2="86.36" y2="58.42" width="0.1524" layer="91"/>
 <wire x1="81.28" y1="63.5" x2="81.28" y2="60.96" width="0.1524" layer="91"/>
 <wire x1="81.28" y1="60.96" x2="86.36" y2="60.96" width="0.1524" layer="91"/>
 <junction x="86.36" y="60.96"/>
 </segment>
 <segment>
 <pinref part="C2" gate="G$1" pin="2"/>
 <pinref part="GND22" gate="1" pin="GND"/>
 <wire x1="185.42" y1="58.42" x2="180.34" y2="58.42" width="0.1524" layer="91"/>
 <wire x1="180.34" y1="58.42" x2="180.34" y2="48.26" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="2"/>
 <wire x1="180.34" y1="48.26" x2="180.34" y2="45.72" width="0.1524" layer="91"/>
 <wire x1="185.42" y1="48.26" x2="180.34" y2="48.26" width="0.1524" layer="91"/>
 <junction x="180.34" y="48.26"/>
 </segment>
 </net>
 <net name="N$2" class="0">
 <segment>
 <pinref part="BATT" gate="G$1" pin="1"/>
 <pinref part="Q6" gate="G$1" pin="D"/>
 <wire x1="12.7" y1="10.16" x2="15.24" y2="10.16" width="0.1524" layer="91"/>
@@ @@ -5848,19 +5906,37 @@ Source: http://www.osram.convergy.de/</d @@
 <net name="TOSC1" class="0">
 <segment>
 <pinref part="IC1" gate="G$1" pin="(PCINT22/TOSC1)PC6"/>
 <wire x1="226.06" y1="106.68" x2="236.22" y2="106.68" width="0.1524" layer="91"/>
 <label x="231.14" y="106.68" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="2"/>
 <wire x1="198.12" y1="55.88" x2="198.12" y2="58.42" width="0.1524" layer="91"/>
 <wire x1="198.12" y1="58.42" x2="210.82" y2="58.42" width="0.1524" layer="91"/>
 <wire x1="198.12" y1="58.42" x2="193.04" y2="58.42" width="0.1524" layer="91"/>
 <pinref part="C2" gate="G$1" pin="1"/>
 <junction x="198.12" y="58.42"/>
 <label x="205.74" y="58.42" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="TOSC2" class="0">
 <segment>
 <pinref part="IC1" gate="G$1" pin="(PCINT23/TOSC2)PC7"/>
 <wire x1="226.06" y1="109.22" x2="236.22" y2="109.22" width="0.1524" layer="91"/>
 <label x="231.14" y="109.22" size="1.778" layer="95"/>
 </segment>
 <segment>
 <pinref part="U$2" gate="G$1" pin="1"/>
 <wire x1="198.12" y1="50.8" x2="198.12" y2="48.26" width="0.1524" layer="91"/>
 <wire x1="198.12" y1="48.26" x2="210.82" y2="48.26" width="0.1524" layer="91"/>
 <wire x1="198.12" y1="48.26" x2="193.04" y2="48.26" width="0.1524" layer="91"/>
 <pinref part="C1" gate="G$1" pin="1"/>
 <junction x="198.12" y="48.26"/>
 <label x="205.74" y="48.26" size="1.778" layer="95"/>
 </segment>
 </net>
 </nets>
 </sheet>
 </sheets>
 </schematic>
 </drawing>

0 comments (0 inline, 0 general)