Changeset - 60ff67043716
Parent rev.
Child rev.
[Not reviewed]
default
0 1 0
mkroening@CL-SEC241-07.cedarville.edu - 12 years ago 2012-10-25 15:37:11
mkroening@CL-SEC241-07.cedarville.edu
Put pin headers on PCB MKr
1 file changed with 29 insertions and 29 deletions:
slave/slave.brd
29
29
0 comments (0 inline, 0 general)
slave/slave.brd
➞
Show inline comments
 
@@ -868,14 +868,14 @@ design rules under a new name.</descript
 
<element name="L3" library="SparkFun" package="SRU1038" value="47uH" x="16.51" y="7.62"/>
 
<element name="D1" library="SparkFun" package="SMA-DIODE" value="DIODE-SCHOTTKY" x="15.24" y="17.78" rot="R90"/>
 
<element name="C11" library="SparkFun" package="0603-CAP" value="220nF" x="-39.37" y="60.96"/>
 
<element name="C12" library="SparkFun" package="0805" value="100uF" x="-27.94" y="60.96"/>
 
<element name="ROTARY_DIP" library="SeniorDesign" package="CD08RM0SB" value="CD08RM0SB" x="5.08" y="26.67"/>
 
<element name="TEMP" library="SeniorDesign" package="SOT23-5" value="MCP9800" x="27.94" y="24.13"/>
 
<element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="54.61" y="62.23"/>
 
<element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="-57.15" y="-17.78"/>
 
<element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="24.13" y="36.83"/>
 
<element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="24.13" y="2.54"/>
 
<element name="R3" library="SparkFun" package="0603-RES" value="4.7k" x="-57.15" y="-22.86"/>
 
<element name="R4" library="SparkFun" package="0603-RES" value="4.7k" x="-57.15" y="-25.4"/>
 
<element name="R5" library="SparkFun" package="0603-RES" value="4.7k" x="-57.15" y="-27.94"/>
 
<element name="C13" library="SparkFun" package="0603-CAP" value="18pf" x="-57.15" y="-36.83"/>
 
<element name="C14" library="SparkFun" package="0603-CAP" value="18pf" x="-53.34" y="-36.83"/>
 
<element name="Y2" library="SparkFun" package="CRYSTAL-SMD-5X3" value="11.0592MHz" x="-55.88" y="-31.75"/>
 
@@ -926,14 +926,14 @@ design rules under a new name.</descript
 
<wire x1="-56.3" y1="-52.07" x2="-52.07" y2="-58.42" width="0" layer="19" extent="1-1"/>
 
<wire x1="-56.3" y1="-48.26" x2="-56.3" y2="-52.07" width="0" layer="19" extent="1-1"/>
 
<wire x1="-56.3" y1="-44.45" x2="-56.3" y2="-48.26" width="0" layer="19" extent="1-1"/>
 
<wire x1="-58" y1="-40.64" x2="-56.3" y2="-44.45" width="0" layer="19" extent="1-1"/>
 
<wire x1="-58" y1="-36.83" x2="-58" y2="-40.64" width="0" layer="19" extent="1-1"/>
 
<wire x1="-54.19" y1="-36.83" x2="-58" y2="-36.83" width="0" layer="19" extent="1-1"/>
 
<wire x1="-57.15" y1="-17.653" x2="-58" y2="-36.83" width="0" layer="19" extent="1-1"/>
 
<wire x1="3.81" y1="3.79" x2="-57.15" y2="-17.653" width="0" layer="19" extent="1-1"/>
 
<wire x1="24.13" y1="2.667" x2="-58" y2="-36.83" width="0" layer="19" extent="1-1"/>
 
<wire x1="3.81" y1="3.79" x2="24.13" y2="2.667" width="0" layer="19" extent="1-1"/>
 
<wire x1="4.13" y1="11.6" x2="3.81" y2="3.79" width="0" layer="19" extent="1-1"/>
 
<wire x1="7.62" y1="20.32" x2="4.13" y2="11.6" width="0" layer="19" extent="1-1"/>
 
<wire x1="5.02" y1="20.955" x2="7.62" y2="20.32" width="0" layer="19" extent="1-1"/>
 
<wire x1="5.02" y1="22.225" x2="5.02" y2="20.955" width="0" layer="19" extent="1-1"/>
 
<wire x1="4.445" y1="30.6705" x2="5.02" y2="22.225" width="0" layer="19" extent="1-1"/>
 
<wire x1="15.24" y1="15.63" x2="7.62" y2="20.32" width="0" layer="19" extent="1-1"/>
 
@@ -978,14 +978,14 @@ design rules under a new name.</descript
 
<wire x1="-56.3" y1="-66.04" x2="-56.3" y2="-69.85" width="0" layer="19" extent="1-1"/>
 
<wire x1="-57.15" y1="-58.42" x2="-56.3" y2="-66.04" width="0" layer="19" extent="1-1"/>
 
<wire x1="-58" y1="-52.07" x2="-57.15" y2="-58.42" width="0" layer="19" extent="1-1"/>
 
<wire x1="-58" y1="-48.26" x2="-58" y2="-52.07" width="0" layer="19" extent="1-1"/>
 
<wire x1="-58" y1="-44.45" x2="-58" y2="-48.26" width="0" layer="19" extent="1-1"/>
 
<wire x1="-52.49" y1="-40.64" x2="-58" y2="-44.45" width="0" layer="19" extent="1-1"/>
 
<wire x1="-52.07" y1="-17.653" x2="-52.49" y2="-40.64" width="0" layer="19" extent="1-1"/>
 
<wire x1="5.02" y1="18.415" x2="-52.07" y2="-17.653" width="0" layer="19" extent="1-1"/>
 
<wire x1="29.21" y1="2.667" x2="-52.49" y2="-40.64" width="0" layer="19" extent="1-1"/>
 
<wire x1="5.02" y1="18.415" x2="29.21" y2="2.667" width="0" layer="19" extent="1-1"/>
 
<wire x1="21.01" y1="7.62" x2="5.02" y2="18.415" width="0" layer="19" extent="1-1"/>
 
<wire x1="26.99" y1="22.84" x2="21.01" y2="7.62" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.475" y1="20.485" x2="26.99" y2="22.84" width="0" layer="19" extent="1-1"/>
 
<wire x1="42.075" y1="25.485" x2="35.475" y2="20.485" width="0" layer="19" extent="1-1"/>
 
<wire x1="41.275" y1="13.885" x2="35.475" y2="20.485" width="0" layer="19" extent="1-1"/>
 
<wire x1="29.53" y1="32.185" x2="26.99" y2="22.84" width="0" layer="19" extent="1-16"/>
 
@@ -1010,13 +1010,13 @@ design rules under a new name.</descript
 
<signal name="VBAT">
 
<contactref element="Q6" pad="2"/>
 
<contactref element="3.3V_SWITCHING" pad="8"/>
 
<contactref element="3.3V_SWITCHING" pad="7"/>
 
<contactref element="C8" pad="1"/>
 
<contactref element="JP1" pad="2"/>
 
<wire x1="6.03" y1="11.6" x2="-54.61" y2="-17.907" width="0" layer="19" extent="1-1"/>
 
<wire x1="6.03" y1="11.6" x2="26.67" y2="2.413" width="0" layer="19" extent="1-1"/>
 
<wire x1="10.22" y1="20.955" x2="6.03" y2="11.6" width="0" layer="19" extent="1-1"/>
 
<wire x1="10.22" y1="22.225" x2="10.22" y2="20.955" width="0" layer="19" extent="1-1"/>
 
<wire x1="-25.03" y1="60.96" x2="10.22" y2="22.225" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$3">
 
<contactref element="R2" pad="2"/>
 
@@ -1044,85 +1044,85 @@ design rules under a new name.</descript
 
</signal>
 
<signal name="SDA">
 
<contactref element="IC1" pad="20"/>
 
<contactref element="TEMP" pad="5"/>
 
<contactref element="R7" pad="1"/>
 
<contactref element="JP2" pad="2"/>
 
<wire x1="57.15" y1="62.103" x2="-58" y2="-69.85" width="0" layer="19" extent="1-1"/>
 
<wire x1="26.99" y1="25.43" x2="57.15" y2="62.103" width="0" layer="19" extent="1-1"/>
 
<wire x1="26.67" y1="36.703" x2="-58" y2="-69.85" width="0" layer="19" extent="1-1"/>
 
<wire x1="26.99" y1="25.43" x2="26.67" y2="36.703" width="0" layer="19" extent="1-1"/>
 
<wire x1="43.675" y1="13.885" x2="26.99" y2="25.43" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="SCL">
 
<contactref element="IC1" pad="19"/>
 
<contactref element="TEMP" pad="4"/>
 
<contactref element="R6" pad="1"/>
 
<contactref element="JP2" pad="1"/>
 
<wire x1="54.61" y1="62.357" x2="-58" y2="-66.04" width="0" layer="19" extent="1-1"/>
 
<wire x1="28.89" y1="25.43" x2="54.61" y2="62.357" width="0" layer="19" extent="1-1"/>
 
<wire x1="24.13" y1="36.957" x2="-58" y2="-66.04" width="0" layer="19" extent="1-1"/>
 
<wire x1="28.89" y1="25.43" x2="24.13" y2="36.957" width="0" layer="19" extent="1-1"/>
 
<wire x1="42.875" y1="13.885" x2="28.89" y2="25.43" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA0">
 
<contactref element="IC1" pad="37"/>
 
<contactref element="JP2" pad="3"/>
 
<wire x1="59.69" y1="62.357" x2="42.875" y2="25.485" width="0" layer="19" extent="1-1"/>
 
<wire x1="29.21" y1="36.957" x2="42.875" y2="25.485" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA1">
 
<contactref element="IC1" pad="36"/>
 
<contactref element="JP2" pad="4"/>
 
<wire x1="62.23" y1="62.103" x2="43.675" y2="25.485" width="0" layer="19" extent="1-1"/>
 
<wire x1="31.75" y1="36.703" x2="43.675" y2="25.485" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA2">
 
<contactref element="IC1" pad="35"/>
 
<contactref element="JP2" pad="5"/>
 
<wire x1="64.77" y1="62.357" x2="44.475" y2="25.485" width="0" layer="19" extent="1-1"/>
 
<wire x1="34.29" y1="36.957" x2="44.475" y2="25.485" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA3">
 
<contactref element="IC1" pad="34"/>
 
<contactref element="JP2" pad="6"/>
 
<wire x1="67.31" y1="62.103" x2="45.275" y2="25.485" width="0" layer="19" extent="1-1"/>
 
<wire x1="36.83" y1="36.703" x2="45.275" y2="25.485" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA4">
 
<contactref element="IC1" pad="33"/>
 
<contactref element="JP2" pad="7"/>
 
<wire x1="69.85" y1="62.357" x2="47.075" y2="23.685" width="0" layer="19" extent="1-1"/>
 
<wire x1="39.37" y1="36.957" x2="47.075" y2="23.685" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA5">
 
<contactref element="IC1" pad="32"/>
 
<contactref element="JP2" pad="8"/>
 
<wire x1="72.39" y1="62.103" x2="47.075" y2="22.885" width="0" layer="19" extent="1-1"/>
 
<wire x1="41.91" y1="36.703" x2="47.075" y2="22.885" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA6">
 
<contactref element="IC1" pad="31"/>
 
<contactref element="JP2" pad="9"/>
 
<wire x1="74.93" y1="62.357" x2="47.075" y2="22.085" width="0" layer="19" extent="1-1"/>
 
<wire x1="44.45" y1="36.957" x2="47.075" y2="22.085" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA7">
 
<contactref element="IC1" pad="30"/>
 
<contactref element="JP2" pad="10"/>
 
<wire x1="77.47" y1="62.103" x2="47.075" y2="21.285" width="0" layer="19" extent="1-1"/>
 
<wire x1="46.99" y1="36.703" x2="47.075" y2="21.285" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="SCK">
 
<contactref element="IC1" pad="3"/>
 
<contactref element="ICSP" pad="3"/>
 
<contactref element="JP1" pad="6"/>
 
<wire x1="-44.45" y1="-17.907" x2="-54.61" y2="-60.96" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.475" y1="22.085" x2="-44.45" y2="-17.907" width="0" layer="19" extent="1-1"/>
 
<wire x1="36.83" y1="2.413" x2="-54.61" y2="-60.96" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.475" y1="22.085" x2="36.83" y2="2.413" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="MISO">
 
<contactref element="IC1" pad="2"/>
 
<contactref element="ICSP" pad="1"/>
 
<contactref element="JP1" pad="5"/>
 
<wire x1="-46.99" y1="-17.653" x2="-57.15" y2="-60.96" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.475" y1="22.885" x2="-46.99" y2="-17.653" width="0" layer="19" extent="1-1"/>
 
<wire x1="34.29" y1="2.667" x2="-57.15" y2="-60.96" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.475" y1="22.885" x2="34.29" y2="2.667" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="MOSI">
 
<contactref element="IC1" pad="1"/>
 
<contactref element="ICSP" pad="4"/>
 
<contactref element="JP1" pad="4"/>
 
<wire x1="-49.53" y1="-17.907" x2="-54.61" y2="-58.42" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.475" y1="23.685" x2="-49.53" y2="-17.907" width="0" layer="19" extent="1-1"/>
 
<wire x1="31.75" y1="2.413" x2="-54.61" y2="-58.42" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.475" y1="23.685" x2="31.75" y2="2.413" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$10">
 
<contactref element="Y2" pad="3"/>
 
<contactref element="C14" pad="2"/>
 
<wire x1="-54.03" y1="-30.6" x2="-52.49" y2="-36.83" width="0" layer="19" extent="1-1"/>
 
</signal>
 
@@ -1165,28 +1165,28 @@ design rules under a new name.</descript
 
<signal name="TXD1">
 
<contactref element="IC1" pad="12"/>
 
</signal>
 
<signal name="PD7">
 
<contactref element="IC1" pad="16"/>
 
<contactref element="JP1" pad="10"/>
 
<wire x1="-34.29" y1="-17.907" x2="40.475" y2="13.885" width="0" layer="19" extent="1-1"/>
 
<wire x1="46.99" y1="2.413" x2="40.475" y2="13.885" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PD6">
 
<contactref element="IC1" pad="15"/>
 
<contactref element="JP1" pad="9"/>
 
<wire x1="-36.83" y1="-17.653" x2="39.675" y2="13.885" width="0" layer="19" extent="1-1"/>
 
<wire x1="44.45" y1="2.667" x2="39.675" y2="13.885" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PD5">
 
<contactref element="IC1" pad="14"/>
 
<contactref element="JP1" pad="8"/>
 
<wire x1="38.875" y1="13.885" x2="-39.37" y2="-17.907" width="0" layer="19" extent="1-1"/>
 
<wire x1="38.875" y1="13.885" x2="41.91" y2="2.413" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PD4">
 
<contactref element="IC1" pad="13"/>
 
<contactref element="JP1" pad="7"/>
 
<wire x1="38.075" y1="13.885" x2="-41.91" y2="-17.653" width="0" layer="19" extent="1-1"/>
 
<wire x1="38.075" y1="13.885" x2="39.37" y2="2.667" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$1">
 
<contactref element="ROTARY_DIP" pad="2"/>
 
</signal>
 
<signal name="N$7">
 
<contactref element="ROTARY_DIP" pad="8"/>
0 comments (0 inline, 0 general)
Server instance: zserverv-26437 This site is powered by Kallithea, which is © 2010–2021 by various authors & licensed under GPLv3. – Support