Changeset - 82dbbc2c0408
Parent rev.
Child rev.
[Not reviewed]
default
0 1 0
kripperger@CL-SEC241-09.cedarville.edu - 13 years ago 2012-10-29 17:01:29
kripperger@CL-SEC241-09.cedarville.edu
Slave power routing
1 file changed with 35 insertions and 15 deletions:
slave/slave.brd
35
15
0 comments (0 inline, 0 general)
slave/slave.brd
➞
Show inline comments
 
@@ -749,593 +749,613 @@ Source: http://www.osram.convergy.de/ ..
 
<description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 
&lt;p&gt;
 
Die Standard-Design-Rules sind so gewählt, dass sie für
 
die meisten Anwendungen passen. Sollte ihre Platine
 
besondere Anforderungen haben, treffen Sie die erforderlichen
 
Einstellungen hier und speichern die Design Rules unter
 
einem neuen Namen ab.</description>
 
<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
 
&lt;p&gt;
 
The default Design Rules have been set to cover
 
a wide range of applications. Your particular design
 
may have different requirements, so please make the
 
necessary adjustments and save your customized
 
design rules under a new name.</description>
 
<param name="layerSetup" value="(1*16)"/>
 
<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
 
<param name="mtIsolate" value="1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
 
<param name="mdWireWire" value="8mil"/>
 
<param name="mdWirePad" value="8mil"/>
 
<param name="mdWireVia" value="8mil"/>
 
<param name="mdPadPad" value="8mil"/>
 
<param name="mdPadVia" value="8mil"/>
 
<param name="mdViaVia" value="8mil"/>
 
<param name="mdSmdPad" value="8mil"/>
 
<param name="mdSmdVia" value="8mil"/>
 
<param name="mdSmdSmd" value="8mil"/>
 
<param name="mdViaViaSameLayer" value="8mil"/>
 
<param name="mnLayersViaInSmd" value="2"/>
 
<param name="mdCopperDimension" value="40mil"/>
 
<param name="mdDrill" value="8mil"/>
 
<param name="mdSmdStop" value="0mil"/>
 
<param name="msWidth" value="10mil"/>
 
<param name="msDrill" value="24mil"/>
 
<param name="msMicroVia" value="9.99mm"/>
 
<param name="msBlindViaRatio" value="0.5"/>
 
<param name="rvPadTop" value="0.25"/>
 
<param name="rvPadInner" value="0.25"/>
 
<param name="rvPadBottom" value="0.25"/>
 
<param name="rvViaOuter" value="0.25"/>
 
<param name="rvViaInner" value="0.25"/>
 
<param name="rvMicroViaOuter" value="0.25"/>
 
<param name="rvMicroViaInner" value="0.25"/>
 
<param name="rlMinPadTop" value="10mil"/>
 
<param name="rlMaxPadTop" value="20mil"/>
 
<param name="rlMinPadInner" value="10mil"/>
 
<param name="rlMaxPadInner" value="20mil"/>
 
<param name="rlMinPadBottom" value="10mil"/>
 
<param name="rlMaxPadBottom" value="20mil"/>
 
<param name="rlMinViaOuter" value="8mil"/>
 
<param name="rlMaxViaOuter" value="20mil"/>
 
<param name="rlMinViaInner" value="8mil"/>
 
<param name="rlMaxViaInner" value="20mil"/>
 
<param name="rlMinMicroViaOuter" value="4mil"/>
 
<param name="rlMaxMicroViaOuter" value="20mil"/>
 
<param name="rlMinMicroViaInner" value="4mil"/>
 
<param name="rlMaxMicroViaInner" value="20mil"/>
 
<param name="psTop" value="-1"/>
 
<param name="psBottom" value="-1"/>
 
<param name="psFirst" value="-1"/>
 
<param name="psElongationLong" value="100"/>
 
<param name="psElongationOffset" value="100"/>
 
<param name="mvStopFrame" value="1"/>
 
<param name="mvCreamFrame" value="0"/>
 
<param name="mlMinStopFrame" value="4mil"/>
 
<param name="mlMaxStopFrame" value="4mil"/>
 
<param name="mlMinCreamFrame" value="0mil"/>
 
<param name="mlMaxCreamFrame" value="0mil"/>
 
<param name="mlViaStopLimit" value="0mil"/>
 
<param name="srRoundness" value="0"/>
 
<param name="srMinRoundness" value="0mil"/>
 
<param name="srMaxRoundness" value="0mil"/>
 
<param name="slThermalIsolate" value="10mil"/>
 
<param name="slThermalsForVias" value="0"/>
 
<param name="dpMaxLengthDifference" value="10mm"/>
 
<param name="dpGapFactor" value="2.5"/>
 
<param name="checkGrid" value="0"/>
 
<param name="checkAngle" value="0"/>
 
<param name="checkFont" value="1"/>
 
<param name="checkRestrict" value="1"/>
 
<param name="useDiameter" value="13"/>
 
<param name="maxErrors" value="50"/>
 
</designrules>
 
<autorouter>
 
<pass name="Default">
 
<param name="RoutingGrid" value="50mil"/>
 
<param name="tpViaShape" value="round"/>
 
<param name="PrefDir.1" value="|"/>
 
<param name="PrefDir.2" value="0"/>
 
<param name="PrefDir.3" value="0"/>
 
<param name="PrefDir.4" value="0"/>
 
<param name="PrefDir.5" value="0"/>
 
<param name="PrefDir.6" value="0"/>
 
<param name="PrefDir.7" value="0"/>
 
<param name="PrefDir.8" value="0"/>
 
<param name="PrefDir.9" value="0"/>
 
<param name="PrefDir.10" value="0"/>
 
<param name="PrefDir.11" value="0"/>
 
<param name="PrefDir.12" value="0"/>
 
<param name="PrefDir.13" value="0"/>
 
<param name="PrefDir.14" value="0"/>
 
<param name="PrefDir.15" value="0"/>
 
<param name="PrefDir.16" value="-"/>
 
<param name="cfVia" value="8"/>
 
<param name="cfNonPref" value="5"/>
 
<param name="cfChangeDir" value="2"/>
 
<param name="cfOrthStep" value="2"/>
 
<param name="cfDiagStep" value="3"/>
 
<param name="cfExtdStep" value="0"/>
 
<param name="cfBonusStep" value="1"/>
 
<param name="cfMalusStep" value="1"/>
 
<param name="cfPadImpact" value="4"/>
 
<param name="cfSmdImpact" value="4"/>
 
<param name="cfBusImpact" value="0"/>
 
<param name="cfHugging" value="3"/>
 
<param name="cfAvoid" value="4"/>
 
<param name="cfPolygon" value="10"/>
 
<param name="cfBase.1" value="0"/>
 
<param name="cfBase.2" value="1"/>
 
<param name="cfBase.3" value="1"/>
 
<param name="cfBase.4" value="1"/>
 
<param name="cfBase.5" value="1"/>
 
<param name="cfBase.6" value="1"/>
 
<param name="cfBase.7" value="1"/>
 
<param name="cfBase.8" value="1"/>
 
<param name="cfBase.9" value="1"/>
 
<param name="cfBase.10" value="1"/>
 
<param name="cfBase.11" value="1"/>
 
<param name="cfBase.12" value="1"/>
 
<param name="cfBase.13" value="1"/>
 
<param name="cfBase.14" value="1"/>
 
<param name="cfBase.15" value="1"/>
 
<param name="cfBase.16" value="0"/>
 
<param name="mnVias" value="20"/>
 
<param name="mnSegments" value="9999"/>
 
<param name="mnExtdSteps" value="9999"/>
 
<param name="mnRipupLevel" value="10"/>
 
<param name="mnRipupSteps" value="100"/>
 
<param name="mnRipupTotal" value="100"/>
 
</pass>
 
<pass name="Follow-me" refer="Default" active="yes">
 
</pass>
 
<pass name="Busses" refer="Default" active="yes">
 
<param name="cfNonPref" value="4"/>
 
<param name="cfBusImpact" value="4"/>
 
<param name="cfHugging" value="0"/>
 
<param name="mnVias" value="0"/>
 
</pass>
 
<pass name="Route" refer="Default" active="yes">
 
</pass>
 
<pass name="Optimize1" refer="Default" active="yes">
 
<param name="cfVia" value="99"/>
 
<param name="cfExtdStep" value="10"/>
 
<param name="cfHugging" value="1"/>
 
<param name="mnExtdSteps" value="1"/>
 
<param name="mnRipupLevel" value="0"/>
 
</pass>
 
<pass name="Optimize2" refer="Optimize1" active="yes">
 
<param name="cfNonPref" value="0"/>
 
<param name="cfChangeDir" value="6"/>
 
<param name="cfExtdStep" value="0"/>
 
<param name="cfBonusStep" value="2"/>
 
<param name="cfMalusStep" value="2"/>
 
<param name="cfPadImpact" value="2"/>
 
<param name="cfSmdImpact" value="2"/>
 
<param name="cfHugging" value="0"/>
 
</pass>
 
<pass name="Optimize3" refer="Optimize2" active="yes">
 
<param name="cfChangeDir" value="8"/>
 
<param name="cfPadImpact" value="0"/>
 
<param name="cfSmdImpact" value="0"/>
 
</pass>
 
<pass name="Optimize4" refer="Optimize3" active="yes">
 
<param name="cfChangeDir" value="25"/>
 
</pass>
 
</autorouter>
 
<elements>
 
<element name="U$1" library="SparkFun" package="XBEE-SMD" value="XBEE-1B3" x="49.53" y="19.685" rot="MR270"/>
 
<element name="IC1" library="atmel" package="TQFP44" value="ATMEGA644A" x="25.273" y="17.907">
 
<attribute name="OC_NEWARK" value="58M3748" x="78.613" y="7.747" size="1.778" layer="27" display="off"/>
 
<attribute name="MPN" value="ATMEGA644PV-10AU" x="78.613" y="7.747" size="1.778" layer="27" display="off"/>
 
<attribute name="MF" value="" x="78.613" y="7.747" size="1.778" layer="27" display="off"/>
 
<attribute name="OC_FARNELL" value="1455123" x="78.613" y="7.747" size="1.778" layer="27" display="off"/>
 
</element>
 
<element name="R1" library="SparkFun" package="0603-RES" value="10k" x="15.494" y="22.352"/>
 
<element name="C4" library="SparkFun" package="0603-CAP" value="8.2pF" x="24.13" y="30.734" rot="R270"/>
 
<element name="C5" library="SparkFun" package="0603-CAP" value="1uF" x="21.844" y="30.734" rot="R270"/>
 
<element name="3.3V_SWITCHING" library="SeniorDesign" package="SOIC8HEAT" value="IFX91041EJ V33" x="55.626" y="24.892" rot="R270"/>
 
<element name="BATT" library="SLAT-CON-JST-ZH" package="ZH-H-2-1" value="ZH-H-2-1" x="51.054" y="2.794" rot="R180"/>
 
<element name="Q6" library="transistor-small-signal" package="SOT23" value="BSH202" x="50.292" y="8.382" rot="R90"/>
 
<element name="C8" library="SparkFun" package="0805" value="100uF" x="53.594" y="8.382" rot="R270"/>
 
<element name="C9" library="SparkFun" package="0603-CAP" value="22nF" x="45.72" y="22.352" rot="R90"/>
 
<element name="R2" library="SparkFun" package="0603-RES" value="22k" x="45.72" y="25.908" rot="R270"/>
 
<element name="C10" library="SparkFun" package="0603-CAP" value="220nF" x="49.276" y="19.558" rot="R180"/>
 
<element name="C10" library="SparkFun" package="0603-CAP" value="220nF" x="48.514" y="19.05" rot="R180"/>
 
<element name="L3" library="SparkFun" package="SRU1038" value="47uH" x="56.388" y="16.002"/>
 
<element name="D1" library="SparkFun" package="SMA-DIODE" value="DIODE-SCHOTTKY" x="49.022" y="24.13" rot="R270"/>
 
<element name="C11" library="SparkFun" package="0603-CAP" value="220nF" x="58.42" y="8.382" rot="R270"/>
 
<element name="C12" library="SparkFun" package="0805" value="100uF" x="56.134" y="8.382" rot="R270"/>
 
<element name="ROTARY_DIP" library="SeniorDesign" package="CD08RM0SB" value="CD08RM0SB" x="45.974" y="29.718"/>
 
<element name="TEMP" library="SeniorDesign" package="SOT23-5" value="MCP9800" x="15.494" y="28.702" rot="R270"/>
 
<element name="JP2" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="17.78" y="36.83" locked="yes"/>
 
<element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="17.78" y="2.54" locked="yes"/>
 
<element name="C_CRYS2" library="SparkFun" package="0603-CAP" value="18pf" x="16.51" y="17.018" rot="R270"/>
 
<element name="C_CRYS1" library="SparkFun" package="0603-CAP" value="18pf" x="14.224" y="17.018" rot="R270"/>
 
<element name="Y2" library="SparkFun" package="CRYSTAL-SMD-5X3" value="11.0592MHz" x="15.494" y="11.43" rot="R90"/>
 
<element name="C15" library="SparkFun" package="0603-CAP" value=".1uF" x="35.052" y="18.542" rot="R180"/>
 
<element name="L2" library="SparkFun" package="0603" value="10uH" x="35.052" y="16.002"/>
 
<element name="C16" library="SparkFun" package="0603-CAP" value=".1uF" x="15.494" y="20.066" rot="R180"/>
 
<element name="C17" library="SparkFun" package="0603-CAP" value=".1uF" x="35.052" y="20.828"/>
 
<element name="C18" library="SparkFun" package="0603-CAP" value="10uF" x="35.052" y="23.114"/>
 
<element name="ICSP" library="SparkFun" package="2X3-NS" value="AVR_SPI_PRG_6NS" x="5.334" y="28.448"/>
 
<element name="R_SCL" library="SparkFun" package="0603-RES" value="4.7k" x="14.732" y="32.512" rot="R90"/>
 
<element name="R_SDA" library="SparkFun" package="0603-RES" value="4.7k" x="17.272" y="32.512" rot="R90"/>
 
<element name="ASSOC" library="adafruit" package="CHIPLED_0603" value="AMBER" x="5.08" y="18.796" rot="R90"/>
 
<element name="R_ASSOC" library="SparkFun" package="0603-RES" value="10K" x="8.89" y="18.796"/>
 
<element name="R9" library="SparkFun" package="0603-RES" value="10K" x="36.068" y="13.208"/>
 
<element name="R10" library="SparkFun" package="0603-RES" value="1M" x="40.132" y="6.35"/>
 
<element name="R11" library="SparkFun" package="R2512" value="" x="42.926" y="13.716" rot="R180"/>
 
<element name="C19" library="SparkFun" package="0603-CAP" value=".1uF" x="11.684" y="28.702" rot="R270"/>
 
<element name="Q1" library="SparkFun" package="SOT23-3" value="MOSFET-PCHANNELSMD" x="40.132" y="9.652"/>
 
<element name="Q2" library="transistor-npn" package="SOT23-BEC" value="BC849SMD" x="36.068" y="9.652" rot="R180"/>
 
<element name="R_LED0" library="SparkFun" package="0603-RES" value="10K" x="8.89" y="16.256"/>
 
<element name="R_LED1" library="SparkFun" package="0603-RES" value="10K" x="8.89" y="13.716"/>
 
<element name="R_LED2" library="SparkFun" package="0603-RES" value="10K" x="8.89" y="11.176"/>
 
<element name="R_LED3" library="SparkFun" package="0603-RES" value="10K" x="8.89" y="8.636"/>
 
<element name="LED0" library="adafruit" package="CHIPLED_0603" value="BLUE" x="5.08" y="16.256" rot="R90"/>
 
<element name="LED1" library="adafruit" package="CHIPLED_0603" value="GREEN" x="5.08" y="13.716" rot="R90"/>
 
<element name="LED2" library="adafruit" package="CHIPLED_0603" value="WHITE" x="5.08" y="11.176" rot="R90"/>
 
<element name="LED3" library="adafruit" package="CHIPLED_0603" value="RED" x="5.08" y="8.636" rot="R90"/>
 
</elements>
 
<signals>
 
<signal name="GND">
 
<contactref element="U$1" pad="10"/>
 
<contactref element="IC1" pad="18"/>
 
<contactref element="IC1" pad="6"/>
 
<contactref element="IC1" pad="28"/>
 
<contactref element="IC1" pad="39"/>
 
<contactref element="3.3V_SWITCHING" pad="2"/>
 
<contactref element="3.3V_SWITCHING" pad="9"/>
 
<contactref element="C8" pad="2"/>
 
<contactref element="3.3V_SWITCHING" pad="1"/>
 
<contactref element="BATT" pad="2"/>
 
<contactref element="Q6" pad="1"/>
 
<contactref element="R2" pad="1"/>
 
<contactref element="D1" pad="A"/>
 
<contactref element="C11" pad="2"/>
 
<contactref element="C12" pad="2"/>
 
<contactref element="IC1" pad="6"/>
 
<contactref element="IC1" pad="18"/>
 
<contactref element="IC1" pad="28"/>
 
<contactref element="IC1" pad="39"/>
 
<contactref element="C_CRYS1" pad="1"/>
 
<contactref element="C_CRYS2" pad="1"/>
 
<contactref element="C15" pad="1"/>
 
<contactref element="C18" pad="2"/>
 
<contactref element="C17" pad="2"/>
 
<contactref element="C16" pad="2"/>
 
<contactref element="ICSP" pad="6"/>
 
<contactref element="U$1" pad="10"/>
 
<contactref element="ROTARY_DIP" pad="C2"/>
 
<contactref element="ROTARY_DIP" pad="C1"/>
 
<contactref element="JP1" pad="1"/>
 
<contactref element="ASSOC" pad="C"/>
 
<contactref element="Q2" pad="E"/>
 
<contactref element="R11" pad="1"/>
 
<contactref element="LED0" pad="C"/>
 
<contactref element="LED1" pad="C"/>
 
<contactref element="LED2" pad="C"/>
 
<contactref element="LED3" pad="C"/>
 
<contactref element="C4" pad="2"/>
 
<contactref element="C5" pad="2"/>
 
<contactref element="TEMP" pad="2"/>
 
<contactref element="C19" pad="2"/>
 
<wire x1="51.054" y1="2.814" x2="51.054" y2="7.094" width="0.8128" layer="1"/>
 
<wire x1="51.054" y1="7.094" x2="51.392" y2="7.432" width="0.8128" layer="1"/>
 
<wire x1="53.594" y1="7.482" x2="56.134" y2="7.482" width="0.8128" layer="1"/>
 
<wire x1="56.134" y1="7.482" x2="58.37" y2="7.482" width="0.8128" layer="1"/>
 
<wire x1="58.37" y1="7.482" x2="58.42" y2="7.532" width="0.8128" layer="1"/>
 
<wire x1="53.026" y1="26.797" x2="54.61" y2="33.7185" width="0" layer="19" extent="1-1"/>
 
<wire x1="53.026" y1="25.527" x2="53.026" y2="26.797" width="0" layer="19" extent="1-1"/>
 
<wire x1="55.626" y1="24.892" x2="53.026" y2="25.527" width="0" layer="19" extent="1-1"/>
 
<wire x1="49.022" y1="26.28" x2="53.026" y2="26.797" width="0" layer="19" extent="1-1"/>
 
<wire x1="47.53" y1="29.185" x2="49.022" y2="26.28" width="0" layer="19" extent="1-16"/>
 
<wire x1="45.72" y1="26.758" x2="47.53" y2="29.185" width="0" layer="19" extent="1-16"/>
 
<wire x1="45.339" y1="33.7185" x2="47.53" y2="29.185" width="0" layer="19" extent="1-16"/>
 
<wire x1="35.902" y1="23.114" x2="45.72" y2="26.758" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.902" y1="20.828" x2="35.902" y2="23.114" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.902" y1="18.542" x2="35.902" y2="20.828" width="0" layer="19" extent="1-1"/>
 
<wire x1="31.073" y1="17.907" x2="35.902" y2="18.542" width="0" layer="19" extent="1-1"/>
 
<wire x1="26.073" y1="12.107" x2="31.073" y2="17.907" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.118" y1="10.752" x2="35.902" y2="18.542" width="0" layer="19" extent="1-1"/>
 
<wire x1="25.273" y1="23.707" x2="31.073" y2="17.907" width="0" layer="19" extent="1-1"/>
 
<wire x1="24.13" y1="29.884" x2="25.273" y2="23.707" width="0" layer="19" extent="1-1"/>
 
<wire x1="21.844" y1="29.884" x2="24.13" y2="29.884" width="0" layer="19" extent="1-1"/>
 
<wire x1="14.204" y1="28.702" x2="21.844" y2="29.884" width="0" layer="19" extent="1-1"/>
 
<wire x1="11.684" y1="27.852" x2="14.204" y2="28.702" width="0" layer="19" extent="1-1"/>
 
<wire x1="7.874" y1="29.718" x2="11.684" y2="27.852" width="0" layer="19" extent="1-1"/>
 
<wire x1="19.473" y1="17.907" x2="25.273" y2="23.707" width="0" layer="19" extent="1-1"/>
 
<wire x1="16.51" y1="17.868" x2="19.473" y2="17.907" width="0" layer="19" extent="1-1"/>
 
<wire x1="14.224" y1="17.868" x2="16.51" y2="17.868" width="0" layer="19" extent="1-1"/>
 
<wire x1="14.644" y1="20.066" x2="14.224" y2="17.868" width="0" layer="19" extent="1-1"/>
 
<wire x1="4.33" y1="18.796" x2="14.224" y2="17.868" width="0" layer="19" extent="1-1"/>
 
<wire x1="4.33" y1="16.256" x2="4.33" y2="18.796" width="0" layer="19" extent="1-1"/>
 
<wire x1="4.33" y1="13.716" x2="4.33" y2="16.256" width="0" layer="19" extent="1-1"/>
 
<wire x1="4.33" y1="11.176" x2="4.33" y2="13.716" width="0" layer="19" extent="1-1"/>
 
<wire x1="4.33" y1="8.636" x2="4.33" y2="11.176" width="0" layer="19" extent="1-1"/>
 
<wire x1="45.726" y1="13.716" x2="35.902" y2="18.542" width="0" layer="19" extent="1-1"/>
 
<wire x1="51.392" y1="7.432" x2="45.726" y2="13.716" width="0" layer="19" extent="1-1"/>
 
<wire x1="53.594" y1="7.482" x2="51.392" y2="7.432" width="0" layer="19" extent="1-1"/>
 
<wire x1="56.134" y1="7.482" x2="53.594" y2="7.482" width="0" layer="19" extent="1-1"/>
 
<wire x1="58.42" y1="7.532" x2="56.134" y2="7.482" width="0" layer="19" extent="1-1"/>
 
<wire x1="51.054" y1="2.814" x2="51.392" y2="7.432" width="0" layer="19" extent="1-1"/>
 
<wire x1="17.78" y1="2.667" x2="26.073" y2="12.107" width="0" layer="19" extent="1-1"/>
 
<wire x1="53.594" y1="7.482" x2="51.442" y2="7.482" width="0.8128" layer="1"/>
 
<wire x1="51.442" y1="7.482" x2="51.392" y2="7.432" width="0.8128" layer="1"/>
 
</signal>
 
<signal name="VCC">
 
<contactref element="IC1" pad="38"/>
 
<contactref element="IC1" pad="17"/>
 
<contactref element="IC1" pad="5"/>
 
<contactref element="R1" pad="1"/>
 
<contactref element="L3" pad="2"/>
 
<contactref element="3.3V_SWITCHING" pad="4"/>
 
<contactref element="C11" pad="1"/>
 
<contactref element="C12" pad="1"/>
 
<contactref element="L2" pad="2"/>
 
<contactref element="C18" pad="1"/>
 
<contactref element="C17" pad="1"/>
 
<contactref element="C16" pad="1"/>
 
<contactref element="R_SDA" pad="2"/>
 
<contactref element="R_SCL" pad="2"/>
 
<contactref element="ICSP" pad="2"/>
 
<contactref element="JP1" pad="3"/>
 
<contactref element="U$1" pad="1"/>
 
<contactref element="C4" pad="1"/>
 
<contactref element="C5" pad="1"/>
 
<contactref element="TEMP" pad="1"/>
 
<contactref element="C19" pad="1"/>
 
<wire x1="58.42" y1="9.232" x2="60.888" y2="16.002" width="0" layer="19" extent="1-1"/>
 
<wire x1="56.134" y1="9.282" x2="58.42" y2="9.232" width="0" layer="19" extent="1-1"/>
 
<wire x1="53.026" y1="22.987" x2="60.888" y2="16.002" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.902" y1="16.002" x2="53.026" y2="22.987" width="0" layer="19" extent="1-1"/>
 
<wire x1="34.202" y1="20.828" x2="35.902" y2="16.002" width="0" layer="19" extent="1-1"/>
 
<wire x1="34.202" y1="23.114" x2="34.202" y2="20.828" width="0" layer="19" extent="1-1"/>
 
<wire x1="26.073" y1="23.707" x2="34.202" y2="23.114" width="0" layer="19" extent="1-1"/>
 
<wire x1="24.13" y1="31.584" x2="26.073" y2="23.707" width="0" layer="19" extent="1-1"/>
 
<wire x1="21.844" y1="31.584" x2="24.13" y2="31.584" width="0" layer="19" extent="1-1"/>
 
<wire x1="17.272" y1="33.362" x2="21.844" y2="31.584" width="0" layer="19" extent="1-1"/>
 
<wire x1="14.732" y1="33.362" x2="17.272" y2="33.362" width="0" layer="19" extent="1-1"/>
 
<wire x1="14.204" y1="29.652" x2="14.732" y2="33.362" width="0" layer="19" extent="1-1"/>
 
<wire x1="11.684" y1="29.552" x2="14.204" y2="29.652" width="0" layer="19" extent="1-1"/>
 
<wire x1="29.53" y1="32.185" x2="24.13" y2="31.584" width="0" layer="19" extent="1-16"/>
 
<wire x1="14.644" y1="22.352" x2="14.204" y2="29.652" width="0" layer="19" extent="1-1"/>
 
<wire x1="16.344" y1="20.066" x2="14.644" y2="22.352" width="0" layer="19" extent="1-1"/>
 
<wire x1="19.473" y1="18.707" x2="16.344" y2="20.066" width="0" layer="19" extent="1-1"/>
 
<wire x1="25.273" y1="12.107" x2="19.473" y2="18.707" width="0" layer="19" extent="1-1"/>
 
<wire x1="2.794" y1="29.718" x2="11.684" y2="29.552" width="0" layer="19" extent="1-1"/>
 
<wire x1="22.86" y1="2.667" x2="25.273" y2="12.107" width="0" layer="19" extent="1-1"/>
 
<wire x1="56.134" y1="9.282" x2="58.37" y2="9.282" width="0.8128" layer="1"/>
 
<wire x1="58.37" y1="9.282" x2="58.42" y2="9.232" width="0.8128" layer="1"/>
 
<wire x1="58.42" y1="9.232" x2="58.42" y2="9.652" width="0.8128" layer="1"/>
 
<wire x1="60.888" y1="16.002" x2="60.888" y2="14.66" width="0.8128" layer="1"/>
 
<wire x1="60.888" y1="14.66" x2="60.198" y2="13.97" width="0.8128" layer="1"/>
 
<wire x1="60.198" y1="13.97" x2="60.198" y2="11.43" width="0.8128" layer="1"/>
 
<wire x1="60.198" y1="11.43" x2="58.42" y2="9.652" width="0.8128" layer="1"/>
 
</signal>
 
<signal name="RESET">
 
<contactref element="R1" pad="2"/>
 
<contactref element="IC1" pad="4"/>
 
<contactref element="ICSP" pad="5"/>
 
<wire x1="19.473" y1="19.507" x2="16.344" y2="22.352" width="0" layer="19" extent="1-1"/>
 
<wire x1="7.874" y1="27.178" x2="16.344" y2="22.352" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$2">
 
<contactref element="BATT" pad="1"/>
 
<contactref element="Q6" pad="3"/>
 
<wire x1="49.554" y1="2.814" x2="49.192" y2="8.382" width="0" layer="19" extent="1-1"/>
 
<wire x1="49.554" y1="2.814" x2="49.554" y2="8.02" width="0.8128" layer="1"/>
 
<wire x1="49.554" y1="8.02" x2="49.192" y2="8.382" width="0.8128" layer="1"/>
 
</signal>
 
<signal name="VBAT">
 
<contactref element="Q6" pad="2"/>
 
<contactref element="3.3V_SWITCHING" pad="8"/>
 
<contactref element="3.3V_SWITCHING" pad="7"/>
 
<contactref element="C8" pad="1"/>
 
<contactref element="JP1" pad="2"/>
 
<contactref element="R10" pad="2"/>
 
<contactref element="Q1" pad="2"/>
 
<wire x1="58.226" y1="25.527" x2="58.226" y2="26.797" width="0" layer="19" extent="1-1"/>
 
<wire x1="53.594" y1="9.282" x2="58.226" y2="25.527" width="0" layer="19" extent="1-1"/>
 
<wire x1="51.392" y1="9.332" x2="53.594" y2="9.282" width="0" layer="19" extent="1-1"/>
 
<wire x1="51.392" y1="9.332" x2="53.544" y2="9.332" width="0.8128" layer="1"/>
 
<wire x1="53.544" y1="9.332" x2="53.594" y2="9.282" width="0.8128" layer="1"/>
 
<wire x1="41.082" y1="8.652" x2="51.392" y2="9.332" width="0" layer="19" extent="1-1"/>
 
<wire x1="40.982" y1="6.35" x2="41.082" y2="8.652" width="0" layer="19" extent="1-1"/>
 
<wire x1="20.32" y1="2.413" x2="40.982" y2="6.35" width="0" layer="19" extent="1-1"/>
 
<wire x1="53.544" y1="9.332" x2="53.782" y2="9.332" width="0.8128" layer="1"/>
 
<wire x1="53.782" y1="9.332" x2="58.166" y2="13.716" width="0.8128" layer="1"/>
 
<wire x1="58.166" y1="13.716" x2="58.166" y2="19.304" width="0.8128" layer="1"/>
 
<wire x1="58.166" y1="19.304" x2="60.96" y2="22.098" width="0.8128" layer="1"/>
 
<wire x1="60.96" y1="22.098" x2="60.96" y2="24.13" width="0.8128" layer="1"/>
 
<wire x1="60.96" y1="24.13" x2="59.436" y2="25.654" width="0.8128" layer="1"/>
 
<wire x1="59.436" y1="25.654" x2="58.353" y2="25.654" width="0.8128" layer="1"/>
 
<wire x1="58.353" y1="25.654" x2="58.226" y2="25.527" width="0.8128" layer="1"/>
 
<wire x1="58.226" y1="26.797" x2="58.226" y2="25.527" width="0.8128" layer="1"/>
 
</signal>
 
<signal name="N$3">
 
<contactref element="R2" pad="2"/>
 
<contactref element="C9" pad="2"/>
 
<wire x1="45.72" y1="23.202" x2="45.72" y2="25.058" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$4">
 
<contactref element="3.3V_SWITCHING" pad="3"/>
 
<contactref element="C9" pad="1"/>
 
<wire x1="45.72" y1="21.502" x2="53.026" y2="24.257" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$5">
 
<contactref element="3.3V_SWITCHING" pad="5"/>
 
<contactref element="C10" pad="1"/>
 
<wire x1="50.126" y1="19.558" x2="58.226" y2="22.987" width="0" layer="19" extent="1-1"/>
 
<wire x1="49.364" y1="19.05" x2="58.226" y2="22.987" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$6">
 
<contactref element="3.3V_SWITCHING" pad="6"/>
 
<contactref element="C10" pad="2"/>
 
<contactref element="L3" pad="1"/>
 
<contactref element="D1" pad="C"/>
 
<wire x1="49.022" y1="21.98" x2="58.226" y2="24.257" width="0" layer="19" extent="1-1"/>
 
<wire x1="48.426" y1="19.558" x2="49.022" y2="21.98" width="0" layer="19" extent="1-1"/>
 
<wire x1="51.888" y1="16.002" x2="48.426" y2="19.558" width="0" layer="19" extent="1-1"/>
 
<wire x1="51.888" y1="16.002" x2="51.888" y2="19.486" width="0.8128" layer="1"/>
 
<wire x1="51.888" y1="19.486" x2="49.53" y2="21.844" width="0.8128" layer="1"/>
 
<wire x1="49.53" y1="21.844" x2="49.158" y2="21.844" width="0.8128" layer="1"/>
 
<wire x1="49.158" y1="21.844" x2="49.022" y2="21.98" width="0.8128" layer="1"/>
 
<wire x1="47.664" y1="19.05" x2="49.158" y2="21.844" width="0" layer="19" extent="1-1"/>
 
<wire x1="51.888" y1="19.486" x2="58.226" y2="24.257" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="SDA">
 
<contactref element="IC1" pad="20"/>
 
<contactref element="JP2" pad="2"/>
 
<contactref element="TEMP" pad="5"/>
 
<contactref element="R_SDA" pad="1"/>
 
<wire x1="17.272" y1="31.662" x2="20.32" y2="36.703" width="0" layer="19" extent="1-1"/>
 
<wire x1="16.794" y1="29.652" x2="17.272" y2="31.662" width="0" layer="19" extent="1-1"/>
 
<wire x1="27.673" y1="12.107" x2="16.794" y2="29.652" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="SCL">
 
<contactref element="IC1" pad="19"/>
 
<contactref element="JP2" pad="1"/>
 
<contactref element="TEMP" pad="4"/>
 
<contactref element="R_SCL" pad="1"/>
 
<wire x1="14.732" y1="31.662" x2="17.78" y2="36.957" width="0" layer="19" extent="1-1"/>
 
<wire x1="16.794" y1="27.752" x2="14.732" y2="31.662" width="0" layer="19" extent="1-1"/>
 
<wire x1="26.873" y1="12.107" x2="16.794" y2="27.752" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA0">
 
<contactref element="IC1" pad="37"/>
 
<contactref element="JP2" pad="3"/>
 
<wire x1="26.873" y1="23.707" x2="22.86" y2="36.957" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA1">
 
<contactref element="IC1" pad="36"/>
 
<contactref element="JP2" pad="4"/>
 
<wire x1="27.673" y1="23.707" x2="25.4" y2="36.703" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA2">
 
<contactref element="IC1" pad="35"/>
 
<contactref element="JP2" pad="5"/>
 
<wire x1="28.473" y1="23.707" x2="27.94" y2="36.957" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA3">
 
<contactref element="IC1" pad="34"/>
 
<contactref element="JP2" pad="6"/>
 
<wire x1="29.273" y1="23.707" x2="30.48" y2="36.703" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA4">
 
<contactref element="IC1" pad="33"/>
 
<contactref element="JP2" pad="7"/>
 
<wire x1="31.073" y1="21.907" x2="33.02" y2="36.957" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA5">
 
<contactref element="IC1" pad="32"/>
 
<contactref element="JP2" pad="8"/>
 
<wire x1="31.073" y1="21.107" x2="35.56" y2="36.703" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA6">
 
<contactref element="IC1" pad="31"/>
 
<contactref element="JP2" pad="9"/>
 
<wire x1="31.073" y1="20.307" x2="38.1" y2="36.957" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PA7">
 
<contactref element="IC1" pad="30"/>
 
<contactref element="JP2" pad="10"/>
 
<wire x1="31.073" y1="19.507" x2="40.64" y2="36.703" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="SCK">
 
<contactref element="IC1" pad="3"/>
 
<contactref element="ICSP" pad="3"/>
 
<contactref element="JP1" pad="6"/>
 
<wire x1="5.334" y1="27.178" x2="19.473" y2="20.307" width="0" layer="19" extent="1-1"/>
 
<wire x1="30.48" y1="2.413" x2="19.473" y2="20.307" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="MISO">
 
<contactref element="IC1" pad="2"/>
 
<contactref element="ICSP" pad="1"/>
 
<contactref element="JP1" pad="5"/>
 
<wire x1="2.794" y1="27.178" x2="19.473" y2="21.107" width="0" layer="19" extent="1-1"/>
 
<wire x1="27.94" y1="2.667" x2="19.473" y2="21.107" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="MOSI">
 
<contactref element="IC1" pad="1"/>
 
<contactref element="ICSP" pad="4"/>
 
<contactref element="JP1" pad="4"/>
 
<wire x1="5.334" y1="29.718" x2="19.473" y2="21.907" width="0" layer="19" extent="1-1"/>
 
<wire x1="25.4" y1="2.413" x2="19.473" y2="21.907" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$10">
 
<contactref element="Y2" pad="3"/>
 
<contactref element="C_CRYS1" pad="2"/>
 
<contactref element="IC1" pad="7"/>
 
<wire x1="14.224" y1="16.168" x2="19.473" y2="17.107" width="0" layer="19" extent="1-1"/>
 
<wire x1="14.344" y1="13.28" x2="14.224" y2="16.168" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$11">
 
<contactref element="Y2" pad="1"/>
 
<contactref element="C_CRYS2" pad="2"/>
 
<contactref element="IC1" pad="8"/>
 
<wire x1="16.51" y1="16.168" x2="19.473" y2="16.307" width="0" layer="19" extent="1-1"/>
 
<wire x1="16.644" y1="9.58" x2="16.51" y2="16.168" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$12">
 
<contactref element="C15" pad="2"/>
 
<contactref element="IC1" pad="29"/>
 
<wire x1="31.073" y1="18.707" x2="34.202" y2="18.542" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$13">
 
<contactref element="L2" pad="1"/>
 
<contactref element="IC1" pad="27"/>
 
<wire x1="31.073" y1="17.107" x2="34.202" y2="16.002" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="RXD0">
 
<contactref element="IC1" pad="9"/>
 
<contactref element="U$1" pad="2"/>
 
<wire x1="19.473" y1="15.507" x2="31.53" y2="29.185" width="0" layer="19" extent="1-16"/>
 
</signal>
 
<signal name="TXD0">
 
<contactref element="IC1" pad="10"/>
 
<contactref element="U$1" pad="3"/>
 
<wire x1="19.473" y1="14.707" x2="33.53" y2="32.185" width="0" layer="19" extent="1-16"/>
 
</signal>
 
<signal name="RXD1">
 
<contactref element="IC1" pad="11"/>
 
</signal>
 
<signal name="TXD1">
 
<contactref element="IC1" pad="12"/>
 
</signal>
 
<signal name="PD7">
 
<contactref element="IC1" pad="16"/>
 
<contactref element="JP1" pad="10"/>
 
<wire x1="24.473" y1="12.107" x2="40.64" y2="2.413" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PD6">
 
<contactref element="IC1" pad="15"/>
 
<contactref element="JP1" pad="9"/>
 
<wire x1="23.673" y1="12.107" x2="38.1" y2="2.667" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PD5">
 
<contactref element="IC1" pad="14"/>
 
<contactref element="JP1" pad="8"/>
 
<wire x1="22.873" y1="12.107" x2="35.56" y2="2.413" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PD4">
 
<contactref element="IC1" pad="13"/>
 
<contactref element="JP1" pad="7"/>
 
<wire x1="22.073" y1="12.107" x2="33.02" y2="2.667" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="DIP1">
 
<contactref element="ROTARY_DIP" pad="2"/>
 
<contactref element="IC1" pad="24"/>
 
<wire x1="31.073" y1="14.707" x2="54.61" y2="31.1785" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="DIP3">
 
<contactref element="ROTARY_DIP" pad="8"/>
 
<contactref element="IC1" pad="26"/>
 
<wire x1="31.073" y1="16.307" x2="54.61" y2="36.2585" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="DIP2">
 
<contactref element="ROTARY_DIP" pad="4"/>
 
<contactref element="IC1" pad="25"/>
 
<wire x1="31.073" y1="15.507" x2="45.339" y2="31.1785" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="DIP0">
 
<contactref element="ROTARY_DIP" pad="1"/>
 
<contactref element="IC1" pad="23"/>
 
<wire x1="31.073" y1="13.907" x2="45.339" y2="36.2585" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PWM0">
 
<contactref element="IC1" pad="40"/>
 
<contactref element="R_LED0" pad="2"/>
 
<wire x1="9.74" y1="16.256" x2="24.473" y2="23.707" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PWM1">
 
<contactref element="IC1" pad="41"/>
 
<contactref element="R_LED1" pad="2"/>
 
<wire x1="9.74" y1="13.716" x2="23.673" y2="23.707" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PWM2">
 
<contactref element="IC1" pad="42"/>
 
<contactref element="R_LED2" pad="2"/>
 
<wire x1="9.74" y1="11.176" x2="22.873" y2="23.707" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="PWM3">
 
<contactref element="IC1" pad="43"/>
 
<contactref element="R_LED3" pad="2"/>
 
<wire x1="9.74" y1="8.636" x2="22.073" y2="23.707" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="ASSOCLED">
 
<contactref element="U$1" pad="15"/>
 
<contactref element="R_ASSOC" pad="2"/>
 
<wire x1="9.74" y1="18.796" x2="39.53" y2="7.185" width="0" layer="19" extent="1-16"/>
 
</signal>
 
<signal name="N$7">
 
<contactref element="R_ASSOC" pad="1"/>
 
<contactref element="ASSOC" pad="A"/>
 
<wire x1="5.83" y1="18.796" x2="8.04" y2="18.796" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$8">
 
<contactref element="Q2" pad="B"/>
0 comments (0 inline, 0 general)
Server instance: zserverv-756375 This site is powered by Kallithea, which is © 2010–2021 by various authors & licensed under GPLv3. – Support