Changeset - 9976661adec7
Parent rev.
Child rev.
[Not reviewed]
default
0 4 0
ethanzonca - 13 years ago 2012-10-14 21:14:24

Added micro support circuitry -KYLE
4 files changed with 390 insertions and 64 deletions:
master/master.brd
5
8
master/master.sch
24
47
slave/slave.brd
68
4
slave/slave.sch
293
5
0 comments (0 inline, 0 general)
master/master.brd
➞
Show inline comments
 
@@ -1196,38 +1196,38 @@ design rules under a new name.</descript
 
<contactref element="C14" pad="2"/>
 
<contactref element="U1" pad="7"/>
 
<contactref element="U2" pad="6"/>
 
<contactref element="U2" pad="CD1"/>
 
<contactref element="U2" pad="CD2"/>
 
<contactref element="U2" pad="GND1"/>
 
<contactref element="U2" pad="GND2"/>
 
<contactref element="C11" pad="2"/>
 
<contactref element="C5" pad="2"/>
 
<contactref element="M2" pad="0V"/>
 
<contactref element="C13" pad="1"/>
 
<contactref element="BATT" pad="2"/>
 
<contactref element="TEMP" pad="2"/>
 
<contactref element="5V_SWITCHING" pad="9"/>
 
<contactref element="5V_SWITCHING" pad="2"/>
 
<contactref element="Q6" pad="1"/>
 
<contactref element="C12" pad="2"/>
 
<contactref element="5V_SWITCHING" pad="1"/>
 
<contactref element="R2" pad="1"/>
 
<contactref element="D1" pad="A"/>
 
<contactref element="C19" pad="2"/>
 
<contactref element="C18" pad="2"/>
 
<contactref element="3.3V_LDO_REG" pad="1"/>
 
<contactref element="3.3V_LDO_REG" pad="2"/>
 
<contactref element="C21" pad="2"/>
 
<contactref element="C20" pad="2"/>
 
<contactref element="TEMP" pad="2"/>
 
<wire x1="85.09" y1="54.19" x2="85.09" y2="56.3" width="0" layer="19" extent="1-1"/>
 
<wire x1="72.39" y1="35.54" x2="85.09" y2="54.19" width="0" layer="19" extent="1-1"/>
 
<wire x1="73.24" y1="25.4" x2="72.39" y2="35.54" width="0" layer="19" extent="1-1"/>
 
<wire x1="73.24" y1="22.86" x2="73.24" y2="25.4" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="17.78" x2="73.24" y2="22.86" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="15.24" x2="71.54" y2="17.78" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="12.7" x2="71.54" y2="15.24" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="7.62" x2="71.54" y2="12.7" width="0" layer="19" extent="1-1"/>
 
<wire x1="64.45" y1="0.17" x2="71.54" y2="7.62" width="0" layer="19" extent="1-1"/>
 
<wire x1="57.785" y1="33.655" x2="72.39" y2="35.54" width="0" layer="19" extent="1-16"/>
 
<wire x1="48.26" y1="22.31" x2="57.785" y2="33.655" width="0" layer="19" extent="1-16"/>
 
<wire x1="54.06" y1="16.51" x2="48.26" y2="22.31" width="0" layer="19" extent="1-1"/>
 
@@ -1381,58 +1381,55 @@ design rules under a new name.</descript
 
<signal name="RFOUT" class="2">
 
<contactref element="M2" pad="RFOUT"/>
 
<contactref element="X1" pad="1"/>
 
<wire x1="12.7" y1="43.18" x2="24.13" y2="50.8" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="HX1_EN">
 
<contactref element="IC2" pad="2"/>
 
<contactref element="IC1" pad="36"/>
 
<contactref element="R18" pad="1"/>
 
<wire x1="22.86" y1="60.94" x2="52.49" y2="62.23" width="0" layer="19" extent="1-1"/>
 
<wire x1="50.66" y1="22.31" x2="52.49" y2="62.23" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="VCC">
 
<contactref element="ICSP" pad="2"/>
 
<contactref element="L2" pad="2"/>
 
<wire x1="39.37" y1="1.27" x2="71.54" y2="10.16" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="3.3V">
 
<contactref element="C8" pad="1"/>
 
<contactref element="C9" pad="1"/>
 
<contactref element="U$2" pad="1"/>
 
<contactref element="IC1" pad="17"/>
 
<contactref element="IC1" pad="5"/>
 
<contactref element="IC1" pad="38"/>
 
<contactref element="R1" pad="1"/>
 
<contactref element="C17" pad="1"/>
 
<contactref element="C15" pad="1"/>
 
<contactref element="C14" pad="1"/>
 
<contactref element="R11" pad="1"/>
 
<contactref element="R10" pad="2"/>
 
<contactref element="U1" pad="6"/>
 
<contactref element="R15" pad="2"/>
 
<contactref element="U2" pad="4"/>
 
<contactref element="C5" pad="1"/>
 
<contactref element="C11" pad="1"/>
 
<contactref element="R17" pad="2"/>
 
<contactref element="TEMP" pad="1"/>
 
<contactref element="3.3V_LDO_REG" pad="6"/>
 
<contactref element="3.3V_LDO_REG" pad="5"/>
 
<contactref element="C20" pad="1"/>
 
<contactref element="L2" pad="2"/>
 
<contactref element="TEMP" pad="1"/>
 
<wire x1="73.24" y1="30.48" x2="71.44" y2="35.54" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="27.94" x2="73.24" y2="30.48" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="25.4" x2="71.54" y2="27.94" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="22.86" x2="71.54" y2="25.4" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="20.32" x2="71.54" y2="22.86" width="0" layer="19" extent="1-1"/>
 
<wire x1="73.24" y1="7.62" x2="71.54" y2="20.32" width="0" layer="19" extent="1-1"/>
 
<wire x1="71.54" y1="10.16" x2="71.54" y2="20.32" width="0" layer="19" extent="1-1"/>
 
<wire x1="73.24" y1="7.62" x2="71.54" y2="10.16" width="0" layer="19" extent="1-1"/>
 
<wire x1="49.06" y1="22.31" x2="71.54" y2="22.86" width="0" layer="19" extent="1-1"/>
 
<wire x1="42.46" y1="17.31" x2="49.06" y2="22.31" width="0" layer="19" extent="1-1"/>
 
<wire x1="48.26" y1="10.71" x2="42.46" y2="17.31" width="0" layer="19" extent="1-1"/>
 
<wire x1="25.69" y1="15.775" x2="42.46" y2="17.31" width="0" layer="19" extent="1-16"/>
 
<wire x1="23.24" y1="24.82" x2="25.69" y2="15.775" width="0" layer="19" extent="1-16"/>
 
<wire x1="16.83" y1="27.74" x2="23.24" y2="24.82" width="0" layer="19" extent="1-16"/>
 
<wire x1="4.66" y1="20.32" x2="16.83" y2="27.74" width="0" layer="19" extent="1-16"/>
 
<wire x1="4.66" y1="15.24" x2="4.66" y2="20.32" width="0" layer="19" extent="1-1"/>
 
<wire x1="2.96" y1="10.16" x2="4.66" y2="15.24" width="0" layer="19" extent="1-1"/>
 
<wire x1="2.96" y1="7.62" x2="2.96" y2="10.16" width="0" layer="19" extent="1-1"/>
 
<wire x1="4.66" y1="35.56" x2="16.83" y2="27.74" width="0" layer="19" extent="1-16"/>
 
<wire x1="2.96" y1="38.1" x2="4.66" y2="35.56" width="0" layer="19" extent="1-1"/>
master/master.sch
➞
Show inline comments
 
@@ -1591,30 +1591,24 @@ Basic SMA packaged diode. Good for rever
 
<text x="1.524" y="2.921" size="1.778" layer="95">&gt;NAME</text>
 
<text x="1.524" y="-2.159" size="1.778" layer="96">&gt;VALUE</text>
 
<rectangle x1="-2.032" y1="0.508" x2="2.032" y2="1.016" layer="94"/>
 
<rectangle x1="-2.032" y1="1.524" x2="2.032" y2="2.032" layer="94"/>
 
<pin name="1" x="0" y="5.08" visible="off" length="short" direction="pas" swaplevel="1" rot="R270"/>
 
<pin name="2" x="0" y="-2.54" visible="off" length="short" direction="pas" swaplevel="1" rot="R90"/>
 
</symbol>
 
<symbol name="GND">
 
<wire x1="-1.905" y1="0" x2="1.905" y2="0" width="0.254" layer="94"/>
 
<text x="-2.54" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 
<pin name="GND" x="0" y="2.54" visible="off" length="short" direction="sup" rot="R270"/>
 
</symbol>
 
<symbol name="VCC2">
 
<wire x1="0.762" y1="1.27" x2="0" y2="2.54" width="0.254" layer="94"/>
 
<wire x1="0" y1="2.54" x2="-0.762" y2="1.27" width="0.254" layer="94"/>
 
<text x="-1.016" y="3.556" size="1.778" layer="96">&gt;VALUE</text>
 
<pin name="VCC" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 
</symbol>
 
<symbol name="RESISTOR">
 
<wire x1="-2.54" y1="0" x2="-2.159" y2="1.016" width="0.1524" layer="94"/>
 
<wire x1="-2.159" y1="1.016" x2="-1.524" y2="-1.016" width="0.1524" layer="94"/>
 
<wire x1="-1.524" y1="-1.016" x2="-0.889" y2="1.016" width="0.1524" layer="94"/>
 
<wire x1="-0.889" y1="1.016" x2="-0.254" y2="-1.016" width="0.1524" layer="94"/>
 
<wire x1="-0.254" y1="-1.016" x2="0.381" y2="1.016" width="0.1524" layer="94"/>
 
<wire x1="0.381" y1="1.016" x2="1.016" y2="-1.016" width="0.1524" layer="94"/>
 
<wire x1="1.016" y1="-1.016" x2="1.651" y2="1.016" width="0.1524" layer="94"/>
 
<wire x1="1.651" y1="1.016" x2="2.286" y2="-1.016" width="0.1524" layer="94"/>
 
<wire x1="2.286" y1="-1.016" x2="2.54" y2="0" width="0.1524" layer="94"/>
 
<text x="-3.81" y="1.4986" size="1.778" layer="95">&gt;NAME</text>
 
<text x="-3.81" y="-3.302" size="1.778" layer="96">&gt;VALUE</text>
 
@@ -2224,37 +2218,24 @@ Standard 0603 ceramic capacitor, and 0.1
 
<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
 
<gates>
 
<gate name="1" symbol="GND" x="0" y="0"/>
 
</gates>
 
<devices>
 
<device name="">
 
<technologies>
 
<technology name=""/>
 
</technologies>
 
</device>
 
</devices>
 
</deviceset>
 
<deviceset name="VCC" prefix="P+">
 
<description>&lt;b&gt;SUPPLY SYMBOL&lt;/b&gt;</description>
 
<gates>
 
<gate name="1" symbol="VCC2" x="0" y="0"/>
 
</gates>
 
<devices>
 
<device name="">
 
<technologies>
 
<technology name=""/>
 
</technologies>
 
</device>
 
</devices>
 
</deviceset>
 
<deviceset name="RESISTOR" prefix="R" uservalue="yes">
 
<description>&lt;b&gt;Resistor&lt;/b&gt;
 
Basic schematic elements and footprints for 0603, 1206, and PTH resistors.</description>
 
<gates>
 
<gate name="G$1" symbol="RESISTOR" x="0" y="0"/>
 
</gates>
 
<devices>
 
<device name="1206" package="1206">
 
<connects>
 
<connect gate="G$1" pin="1" pad="1"/>
 
<connect gate="G$1" pin="2" pad="2"/>
 
</connects>
 
@@ -5365,25 +5346,24 @@ www.irf.com&lt;p&gt;
 
<part name="ICSP" library="SparkFun" deviceset="AVR_SPI_PRG_6" device="NS"/>
 
<part name="M2" library="trackuino" deviceset="HX1" device=""/>
 
<part name="GND7" library="supply1" deviceset="GND" device=""/>
 
<part name="GND19" library="supply1" deviceset="GND" device=""/>
 
<part name="X1" library="con-coax" deviceset="BU-SMA-V" device=""/>
 
<part name="GND20" library="supply1" deviceset="GND" device=""/>
 
<part name="X2" library="con-coax" deviceset="BU-SMA-V" device="">
 
<attribute name="MF" value=""/>
 
<attribute name="MPN" value=""/>
 
<attribute name="OC_FARNELL" value="unknown"/>
 
<attribute name="OC_NEWARK" value="unknown"/>
 
</part>
 
<part name="P+1" library="SparkFun" deviceset="VCC" device=""/>
 
<part name="P+8" library="SparkFun" deviceset="3.3V" device=""/>
 
<part name="GND3" library="supply1" deviceset="GND" device=""/>
 
<part name="C3" library="SparkFun" deviceset="CAP" device="0603-CAP" value=".1uF"/>
 
<part name="GND6" library="SparkFun" deviceset="GND" device=""/>
 
<part name="P+4" library="SparkFun" deviceset="3.3V" device=""/>
 
<part name="P+5" library="SparkFun" deviceset="3.3V" device=""/>
 
<part name="P+2" library="SparkFun" deviceset="3.3V" device=""/>
 
<part name="U$1" library="SparkFun" deviceset="5V" device=""/>
 
<part name="IC2" library="74xx-little-us" deviceset="74*1G125" device="DBV" technology="AHC" value="ON M74VHC1GT125DT1G"/>
 
<part name="GND8" library="supply1" deviceset="GND" device=""/>
 
<part name="P+3" library="supply1" deviceset="+5V" device=""/>
 
<part name="GND9" library="supply1" deviceset="GND" device=""/>
 
@@ -5456,24 +5436,25 @@ www.irf.com&lt;p&gt;
 
<part name="L3" library="SparkFun" deviceset="INDUCTOR" device="SRU1038" value="47uH"/>
 
<part name="GND26" library="SparkFun" deviceset="GND" device=""/>
 
<part name="U$9" library="SparkFun" deviceset="5V" device=""/>
 
<part name="C18" library="SparkFun" deviceset="CAP" device="0805" value="100uF"/>
 
<part name="C19" library="SparkFun" deviceset="CAP" device="0603-CAP" value="220nF"/>
 
<part name="GND27" library="SparkFun" deviceset="GND" device=""/>
 
<part name="3.3V_LDO_REG" library="SeniorDesign" deviceset="TPS76833QD" device=""/>
 
<part name="GND28" library="SparkFun" deviceset="GND" device=""/>
 
<part name="U$10" library="SparkFun" deviceset="5V" device=""/>
 
<part name="C21" library="SparkFun" deviceset="CAP" device="0603-CAP" value="0.1uF"/>
 
<part name="C20" library="SparkFun" deviceset="CAP" device="0603-CAP" value="10uF"/>
 
<part name="GND29" library="SparkFun" deviceset="GND" device=""/>
 
<part name="P+1" library="SparkFun" deviceset="3.3V" device=""/>
 
</parts>
 
<sheets>
 
<sheet>
 
<plain>
 
<text x="302.006" y="-9.398" size="5.08" layer="94" font="vector">Master Motherboard</text>
 
<text x="53.34" y="243.84" size="5.08" layer="94" font="vector">UART</text>
 
<text x="53.34" y="124.46" size="5.08" layer="94" font="vector">SPI</text>
 
<wire x1="121.92" y1="256.54" x2="121.92" y2="179.578" width="0.3048" layer="94"/>
 
<wire x1="121.92" y1="179.578" x2="121.92" y2="132.08" width="0.3048" layer="94"/>
 
<wire x1="121.92" y1="132.08" x2="3.302" y2="132.08" width="0.3048" layer="94"/>
 
<wire x1="121.92" y1="132.08" x2="121.92" y2="121.92" width="0.3048" layer="94"/>
 
<text x="78.74" y="185.42" size="1.778" layer="91">u.fl</text>
 
@@ -5530,24 +5511,25 @@ pwm outputs
 
are free for leds</text>
 
<wire x1="341.376" y1="118.872" x2="343.916" y2="118.872" width="0.1524" layer="94"/>
 
<wire x1="343.916" y1="118.872" x2="343.916" y2="112.522" width="0.1524" layer="94"/>
 
<wire x1="341.376" y1="106.172" x2="343.916" y2="106.172" width="0.1524" layer="94"/>
 
<wire x1="343.916" y1="106.172" x2="343.916" y2="112.522" width="0.1524" layer="94"/>
 
<wire x1="343.916" y1="112.522" x2="346.456" y2="112.522" width="0.1524" layer="94"/>
 
<text x="347.218" y="111.76" size="1.778" layer="94">Radio Output</text>
 
<text x="15.24" y="81.28" size="1.778" layer="91">CLOSE TO CARD</text>
 
<text x="45.72" y="157.48" size="6.4516" layer="91" ratio="19">TODO</text>
 
<text x="190.5" y="271.78" size="6.4516" layer="91" ratio="19">TODO</text>
 
<wire x1="203.2" y1="121.92" x2="121.92" y2="121.92" width="0.3048" layer="94"/>
 
<wire x1="203.2" y1="71.12" x2="121.92" y2="71.12" width="0.3048" layer="94"/>
 
<text x="96.52" y="152.4" size="1.778" layer="91">Fix this...</text>
 
</plain>
 
<instances>
 
<instance part="U2" gate="G$1" x="96.52" y="96.52"/>
 
<instance part="U$2" gate="G$1" x="76.2" y="218.44"/>
 
<instance part="C1" gate="G$1" x="251.46" y="91.44" rot="R180"/>
 
<instance part="C2" gate="G$1" x="241.3" y="91.44" rot="R180"/>
 
<instance part="GND1" gate="1" x="246.38" y="78.74"/>
 
<instance part="GND2" gate="1" x="264.16" y="30.48"/>
 
<instance part="R1" gate="G$1" x="248.92" y="114.3" rot="R270"/>
 
<instance part="IC1" gate="G$1" x="299.72" y="78.74"/>
 
<instance part="Y2" gate="G$1" x="246.38" y="99.06" smashed="yes" rot="R180">
 
<attribute name="NAME" x="238.76" y="98.044" size="1.778" layer="95" rot="R180"/>
 
@@ -5564,25 +5546,24 @@ are free for leds</text>
 
<instance part="C15" gate="G$1" x="218.44" y="111.76"/>
 
<instance part="C17" gate="G$1" x="208.28" y="111.76"/>
 
<instance part="L1" gate="G$1" x="40.64" y="154.94"/>
 
<instance part="FRAME2" gate="G$1" x="0" y="0"/>
 
<instance part="P+6" gate="G$1" x="172.72" y="40.64"/>
 
<instance part="ICSP" gate="G$1" x="355.6" y="243.84"/>
 
<instance part="M2" gate="G$1" x="165.1" y="215.9" rot="R270"/>
 
<instance part="GND7" gate="1" x="134.62" y="193.04"/>
 
<instance part="GND19" gate="1" x="157.48" y="223.52"/>
 
<instance part="X1" gate="G$1" x="144.78" y="228.6"/>
 
<instance part="GND20" gate="1" x="187.96" y="210.82"/>
 
<instance part="X2" gate="G$1" x="40.64" y="175.26"/>
 
<instance part="P+1" gate="1" x="261.62" y="63.5"/>
 
<instance part="P+8" gate="G$1" x="45.72" y="231.14"/>
 
<instance part="GND3" gate="1" x="45.72" y="200.66"/>
 
<instance part="C3" gate="G$1" x="264.16" y="91.44" rot="R180"/>
 
<instance part="GND6" gate="1" x="264.16" y="78.74"/>
 
<instance part="P+4" gate="G$1" x="78.74" y="121.92"/>
 
<instance part="P+5" gate="G$1" x="101.6" y="157.48"/>
 
<instance part="P+2" gate="G$1" x="256.54" y="127"/>
 
<instance part="U$1" gate="G$1" x="134.62" y="213.36"/>
 
<instance part="IC2" gate="A" x="165.1" y="91.44"/>
 
<instance part="IC2" gate="P" x="132.08" y="93.98"/>
 
<instance part="GND8" gate="1" x="157.48" y="104.14"/>
 
<instance part="P+3" gate="1" x="132.08" y="104.14"/>
 
@@ -5677,26 +5658,26 @@ are free for leds</text>
 
<instance part="R18" gate="G$1" x="213.36" y="236.22" rot="R270"/>
 
<instance part="R19" gate="G$1" x="231.14" y="236.22" rot="R270"/>
 
<instance part="R20" gate="G$1" x="248.92" y="236.22" rot="R270"/>
 
<instance part="R21" gate="G$1" x="266.7" y="236.22" rot="R270"/>
 
<instance part="BATT" gate="G$1" x="10.16" y="12.7"/>
 
<instance part="BUZZ" gate="G$1" x="320.04" y="243.84" rot="R180"/>
 
<instance part="R22" gate="G$1" x="294.64" y="236.22"/>
 
<instance part="GND22" gate="1" x="7.62" y="25.4"/>
 
<instance part="Q6" gate="G$1" x="17.78" y="27.94"/>
 
<instance part="GND5" gate="1" x="22.86" y="7.62"/>
 
<instance part="JTAG" gate="G$1" x="358.14" y="220.98" rot="R180"/>
 
<instance part="TEMP" gate="G$1" x="147.32" y="142.24"/>
 
<instance part="P+10" gate="G$1" x="134.62" y="147.32"/>
 
<instance part="GND21" gate="1" x="134.62" y="142.24"/>
 
<instance part="P+10" gate="G$1" x="134.62" y="149.86"/>
 
<instance part="GND21" gate="1" x="134.62" y="139.7"/>
 
<instance part="5V_SWITCHING" gate="G$1" x="50.8" y="43.18"/>
 
<instance part="GND23" gate="1" x="33.02" y="25.4"/>
 
<instance part="C12" gate="G$1" x="22.86" y="35.56"/>
 
<instance part="GND24" gate="1" x="12.7" y="43.18"/>
 
<instance part="U$8" gate="G$1" x="101.6" y="53.34" smashed="yes">
 
<attribute name="VALUE" x="100.584" y="56.896" size="1.778" layer="96"/>
 
</instance>
 
<instance part="C10" gate="G$1" x="68.58" y="30.48"/>
 
<instance part="R2" gate="G$1" x="60.96" y="25.4"/>
 
<instance part="GND25" gate="1" x="53.34" y="20.32"/>
 
<instance part="C16" gate="G$1" x="73.66" y="48.26" smashed="yes" rot="R90">
 
<attribute name="NAME" x="75.819" y="54.864" size="1.778" layer="95" rot="R180"/>
 
@@ -5716,24 +5697,25 @@ are free for leds</text>
 
</instance>
 
<instance part="C18" gate="G$1" x="88.9" y="27.94"/>
 
<instance part="C19" gate="G$1" x="78.74" y="27.94"/>
 
<instance part="GND27" gate="1" x="83.82" y="17.78"/>
 
<instance part="3.3V_LDO_REG" gate="G$1" x="149.86" y="38.1"/>
 
<instance part="GND28" gate="1" x="129.54" y="22.86"/>
 
<instance part="U$10" gate="G$1" x="129.54" y="50.8" smashed="yes">
 
<attribute name="VALUE" x="128.524" y="54.356" size="1.778" layer="96"/>
 
</instance>
 
<instance part="C21" gate="G$1" x="121.92" y="38.1"/>
 
<instance part="C20" gate="G$1" x="177.8" y="27.94"/>
 
<instance part="GND29" gate="1" x="177.8" y="20.32"/>
 
<instance part="P+1" gate="G$1" x="261.62" y="63.5"/>
 
</instances>
 
<busses>
 
</busses>
 
<nets>
 
<net name="GND" class="0">
 
<segment>
 
<pinref part="C2" gate="G$1" pin="1"/>
 
<wire x1="241.3" y1="86.36" x2="241.3" y2="83.82" width="0.1524" layer="91"/>
 
<wire x1="241.3" y1="83.82" x2="246.38" y2="83.82" width="0.1524" layer="91"/>
 
<pinref part="C1" gate="G$1" pin="1"/>
 
<wire x1="246.38" y1="83.82" x2="251.46" y2="83.82" width="0.1524" layer="91"/>
 
<wire x1="251.46" y1="83.82" x2="251.46" y2="86.36" width="0.1524" layer="91"/>
 
@@ -5907,29 +5889,24 @@ are free for leds</text>
 
<junction x="134.62" y="198.12"/>
 
<wire x1="134.62" y1="198.12" x2="137.16" y2="198.12" width="0.1524" layer="91"/>
 
<pinref part="GND7" gate="1" pin="GND"/>
 
<wire x1="134.62" y1="198.12" x2="134.62" y2="195.58" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<pinref part="BATT" gate="G$1" pin="2"/>
 
<pinref part="GND5" gate="1" pin="GND"/>
 
<wire x1="15.24" y1="12.7" x2="22.86" y2="12.7" width="0.1524" layer="91"/>
 
<wire x1="22.86" y1="12.7" x2="22.86" y2="10.16" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<pinref part="TEMP" gate="G$1" pin="GND"/>
 
<pinref part="GND21" gate="1" pin="GND"/>
 
<wire x1="134.62" y1="144.78" x2="137.16" y2="144.78" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<pinref part="5V_SWITCHING" gate="G$1" pin="GND"/>
 
<wire x1="35.56" y1="38.1" x2="33.02" y2="38.1" width="0.1524" layer="91"/>
 
<pinref part="GND23" gate="1" pin="GND"/>
 
<wire x1="33.02" y1="38.1" x2="33.02" y2="30.48" width="0.1524" layer="91"/>
 
<wire x1="33.02" y1="30.48" x2="33.02" y2="27.94" width="0.1524" layer="91"/>
 
<junction x="33.02" y="30.48"/>
 
<pinref part="C12" gate="G$1" pin="2"/>
 
<wire x1="22.86" y1="33.02" x2="22.86" y2="30.48" width="0.1524" layer="91"/>
 
<wire x1="22.86" y1="30.48" x2="33.02" y2="30.48" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<pinref part="Q6" gate="G$1" pin="G"/>
 
@@ -5975,24 +5952,30 @@ are free for leds</text>
 
<wire x1="134.62" y1="35.56" x2="129.54" y2="35.56" width="0.1524" layer="91"/>
 
<wire x1="129.54" y1="35.56" x2="129.54" y2="30.48" width="0.1524" layer="91"/>
 
<junction x="129.54" y="30.48"/>
 
<pinref part="C21" gate="G$1" pin="2"/>
 
<wire x1="121.92" y1="35.56" x2="121.92" y2="30.48" width="0.1524" layer="91"/>
 
<wire x1="121.92" y1="30.48" x2="129.54" y2="30.48" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<pinref part="C20" gate="G$1" pin="2"/>
 
<pinref part="GND29" gate="1" pin="GND"/>
 
<wire x1="177.8" y1="22.86" x2="177.8" y2="25.4" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<pinref part="TEMP" gate="G$1" pin="GND"/>
 
<wire x1="137.16" y1="144.78" x2="134.62" y2="144.78" width="0.1524" layer="91"/>
 
<pinref part="GND21" gate="1" pin="GND"/>
 
<wire x1="134.62" y1="144.78" x2="134.62" y2="142.24" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="N$1" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="XTAL2"/>
 
<wire x1="271.78" y1="104.14" x2="241.3" y2="104.14" width="0.1524" layer="91"/>
 
<wire x1="241.3" y1="104.14" x2="241.3" y2="99.06" width="0.1524" layer="91"/>
 
<pinref part="Y2" gate="G$1" pin="2"/>
 
<wire x1="241.3" y1="99.06" x2="243.84" y2="99.06" width="0.1524" layer="91"/>
 
<pinref part="C2" gate="G$1" pin="2"/>
 
<wire x1="241.3" y1="99.06" x2="241.3" y2="93.98" width="0.1524" layer="91"/>
 
<junction x="241.3" y="99.06"/>
 
</segment>
 
@@ -6218,38 +6201,24 @@ are free for leds</text>
 
</segment>
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT1/ADC1)PA1"/>
 
<wire x1="325.12" y1="106.68" x2="340.36" y2="106.68" width="0.1524" layer="91"/>
 
<label x="330.2" y="106.68" size="1.778" layer="95"/>
 
</segment>
 
<segment>
 
<pinref part="R18" gate="G$1" pin="1"/>
 
<wire x1="213.36" y1="241.3" x2="213.36" y2="254" width="0.1524" layer="91"/>
 
<label x="213.36" y="243.84" size="1.778" layer="95" rot="R90"/>
 
</segment>
 
</net>
 
<net name="VCC" class="0">
 
<segment>
 
<pinref part="ICSP" gate="G$1" pin="2"/>
 
<wire x1="365.76" y1="246.38" x2="375.92" y2="246.38" width="0.1524" layer="91"/>
 
<label x="370.84" y="246.38" size="1.778" layer="95"/>
 
</segment>
 
<segment>
 
<pinref part="P+1" gate="1" pin="VCC"/>
 
<wire x1="261.62" y1="63.5" x2="261.62" y2="60.96" width="0.1524" layer="91"/>
 
<pinref part="L2" gate="G$1" pin="2"/>
 
<wire x1="261.62" y1="60.96" x2="269.24" y2="60.96" width="0.1524" layer="91"/>
 
<wire x1="269.24" y1="60.96" x2="269.24" y2="63.5" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="3.3V" class="0">
 
<segment>
 
<pinref part="C8" gate="G$1" pin="1"/>
 
<wire x1="35.56" y1="218.44" x2="35.56" y2="220.98" width="0.1524" layer="91"/>
 
<pinref part="C9" gate="G$1" pin="1"/>
 
<wire x1="35.56" y1="220.98" x2="45.72" y2="220.98" width="0.1524" layer="91"/>
 
<wire x1="45.72" y1="220.98" x2="45.72" y2="218.44" width="0.1524" layer="91"/>
 
<pinref part="P+8" gate="G$1" pin="3.3V"/>
 
<wire x1="45.72" y1="220.98" x2="45.72" y2="228.6" width="0.1524" layer="91"/>
 
<pinref part="U$2" gate="G$1" pin="VDD"/>
 
<wire x1="45.72" y1="228.6" x2="45.72" y2="231.14" width="0.1524" layer="91"/>
 
<wire x1="55.88" y1="228.6" x2="45.72" y2="228.6" width="0.1524" layer="91"/>
 
@@ -6314,41 +6283,49 @@ are free for leds</text>
 
<label x="81.28" y="101.6" size="1.778" layer="95"/>
 
</segment>
 
<segment>
 
<pinref part="C5" gate="G$1" pin="1"/>
 
<pinref part="C11" gate="G$1" pin="1"/>
 
<wire x1="20.32" y1="99.06" x2="25.4" y2="99.06" width="0.1524" layer="91"/>
 
<pinref part="P+11" gate="G$1" pin="3.3V"/>
 
<wire x1="25.4" y1="99.06" x2="30.48" y2="99.06" width="0.1524" layer="91"/>
 
<wire x1="25.4" y1="99.06" x2="25.4" y2="101.6" width="0.1524" layer="91"/>
 
<junction x="25.4" y="99.06"/>
 
</segment>
 
<segment>
 
<pinref part="TEMP" gate="G$1" pin="VDD"/>
 
<pinref part="P+10" gate="G$1" pin="3.3V"/>
 
<wire x1="134.62" y1="147.32" x2="137.16" y2="147.32" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<pinref part="3.3V_LDO_REG" gate="G$1" pin="OUT1"/>
 
<pinref part="P+6" gate="G$1" pin="3.3V"/>
 
<wire x1="165.1" y1="35.56" x2="172.72" y2="35.56" width="0.1524" layer="91"/>
 
<wire x1="172.72" y1="35.56" x2="172.72" y2="40.64" width="0.1524" layer="91"/>
 
<pinref part="3.3V_LDO_REG" gate="G$1" pin="OUT2"/>
 
<wire x1="165.1" y1="30.48" x2="172.72" y2="30.48" width="0.1524" layer="91"/>
 
<wire x1="172.72" y1="30.48" x2="172.72" y2="35.56" width="0.1524" layer="91"/>
 
<junction x="172.72" y="35.56"/>
 
<pinref part="C20" gate="G$1" pin="1"/>
 
<wire x1="177.8" y1="33.02" x2="177.8" y2="35.56" width="0.1524" layer="91"/>
 
<wire x1="177.8" y1="35.56" x2="172.72" y2="35.56" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<wire x1="261.62" y1="63.5" x2="261.62" y2="60.96" width="0.1524" layer="91"/>
 
<pinref part="L2" gate="G$1" pin="2"/>
 
<wire x1="261.62" y1="60.96" x2="269.24" y2="60.96" width="0.1524" layer="91"/>
 
<wire x1="269.24" y1="60.96" x2="269.24" y2="63.5" width="0.1524" layer="91"/>
 
<pinref part="P+1" gate="G$1" pin="3.3V"/>
 
</segment>
 
<segment>
 
<pinref part="P+10" gate="G$1" pin="3.3V"/>
 
<wire x1="134.62" y1="149.86" x2="134.62" y2="147.32" width="0.1524" layer="91"/>
 
<pinref part="TEMP" gate="G$1" pin="VDD"/>
 
<wire x1="134.62" y1="147.32" x2="137.16" y2="147.32" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="HX1_EN_5V" class="0">
 
<segment>
 
<wire x1="144.78" y1="213.36" x2="160.02" y2="213.36" width="0.1524" layer="91"/>
 
<pinref part="M2" gate="G$1" pin="EN"/>
 
<label x="144.78" y="213.36" size="1.778" layer="95"/>
 
</segment>
 
<segment>
 
<wire x1="175.26" y1="91.44" x2="198.12" y2="91.44" width="0.1524" layer="91"/>
 
<label x="182.88" y="91.44" size="1.778" layer="95"/>
 
<pinref part="IC2" gate="A" pin="O"/>
 
</segment>
slave/slave.brd
➞
Show inline comments
 
@@ -367,24 +367,63 @@ Basic SMA packaged diode. Good for rever
 
<wire x1="1.473" y1="-0.983" x2="-1.473" y2="-0.983" width="0.0508" layer="39"/>
 
<wire x1="-1.473" y1="-0.983" x2="-1.473" y2="0.983" width="0.0508" layer="39"/>
 
<wire x1="-0.356" y1="0.432" x2="0.356" y2="0.432" width="0.1016" layer="51"/>
 
<wire x1="-0.356" y1="-0.419" x2="0.356" y2="-0.419" width="0.1016" layer="51"/>
 
<smd name="1" x="-0.85" y="0" dx="1.1" dy="1" layer="1"/>
 
<smd name="2" x="0.85" y="0" dx="1.1" dy="1" layer="1"/>
 
<text x="-0.889" y="0.762" size="0.4064" layer="25" font="vector">&gt;NAME</text>
 
<text x="-1.016" y="-1.143" size="0.4064" layer="27" font="vector">&gt;VALUE</text>
 
<rectangle x1="-0.8382" y1="-0.4699" x2="-0.3381" y2="0.4801" layer="51"/>
 
<rectangle x1="0.3302" y1="-0.4699" x2="0.8303" y2="0.4801" layer="51"/>
 
<rectangle x1="-0.1999" y1="-0.3" x2="0.1999" y2="0.3" layer="35"/>
 
</package>
 
<package name="2X3-NS">
 
<wire x1="-3.81" y1="-1.905" x2="-3.175" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="-1.905" y1="-2.54" x2="-1.27" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="-1.27" y1="-1.905" x2="-0.635" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="0.635" y1="-2.54" x2="1.27" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="1.27" y1="-1.905" x2="1.905" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="3.175" y1="-2.54" x2="3.81" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="-3.81" y1="-1.905" x2="-3.81" y2="1.905" width="0.2032" layer="51"/>
 
<wire x1="-3.81" y1="1.905" x2="-3.175" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="-3.175" y1="2.54" x2="-1.905" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="-1.905" y1="2.54" x2="-1.27" y2="1.905" width="0.2032" layer="51"/>
 
<wire x1="-1.27" y1="1.905" x2="-0.635" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="-0.635" y1="2.54" x2="0.635" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="0.635" y1="2.54" x2="1.27" y2="1.905" width="0.2032" layer="51"/>
 
<wire x1="1.27" y1="1.905" x2="1.905" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="1.905" y1="2.54" x2="3.175" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="3.175" y1="2.54" x2="3.81" y2="1.905" width="0.2032" layer="51"/>
 
<wire x1="-1.27" y1="1.905" x2="-1.27" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="1.27" y1="1.905" x2="1.27" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="3.81" y1="1.905" x2="3.81" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="1.905" y1="-2.54" x2="3.175" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="-0.635" y1="-2.54" x2="0.635" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="-3.175" y1="-2.54" x2="-1.905" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="-1.905" y1="-2.875" x2="-3.175" y2="-2.875" width="0.2032" layer="51"/>
 
<pad name="1" x="-2.54" y="-1.27" drill="1.016" diameter="1.8796" shape="square"/>
 
<pad name="2" x="-2.54" y="1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="3" x="0" y="-1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="4" x="0" y="1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="5" x="2.54" y="-1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="6" x="2.54" y="1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<text x="-3.81" y="3.175" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 
<text x="-3.81" y="-4.445" size="1.27" layer="27">&gt;VALUE</text>
 
<rectangle x1="-2.794" y1="-1.524" x2="-2.286" y2="-1.016" layer="51"/>
 
<rectangle x1="-2.794" y1="1.016" x2="-2.286" y2="1.524" layer="51"/>
 
<rectangle x1="-0.254" y1="1.016" x2="0.254" y2="1.524" layer="51"/>
 
<rectangle x1="-0.254" y1="-1.524" x2="0.254" y2="-1.016" layer="51"/>
 
<rectangle x1="2.286" y1="1.016" x2="2.794" y2="1.524" layer="51"/>
 
<rectangle x1="2.286" y1="-1.524" x2="2.794" y2="-1.016" layer="51"/>
 
</package>
 
</packages>
 
</library>
 
<library name="atmel">
 
<description>&lt;b&gt;AVR Devices&lt;/b&gt;&lt;p&gt;
 
Configurable logic, microcontrollers, nonvolatile memories&lt;p&gt;
 
Based on the following sources:&lt;p&gt;
 
&lt;ul&gt;
 
&lt;li&gt;www.atmel.com
 
&lt;li&gt;CD-ROM : Configurable Logic Microcontroller Nonvolatile Memory
 
&lt;li&gt;CadSoft download site, www.cadsoft.de or www.cadsoftusa.com , file at90smcu_v400.zip
 
&lt;li&gt;avr.lbr
 
&lt;/ul&gt;
 
@@ -836,24 +875,25 @@ design rules under a new name.</descript
 
<element name="JP1" library="SparkFun" package="1X10_LOCK" value="M10LOCK" x="-57.15" y="-17.78"/>
 
<element name="R3" library="SparkFun" package="0603-RES" value="" x="-57.15" y="-22.86"/>
 
<element name="R4" library="SparkFun" package="0603-RES" value="" x="-57.15" y="-25.4"/>
 
<element name="R5" library="SparkFun" package="0603-RES" value="" x="-57.15" y="-27.94"/>
 
<element name="C13" library="SparkFun" package="0603-CAP" value="18pf" x="-57.15" y="-36.83"/>
 
<element name="C14" library="SparkFun" package="0603-CAP" value="18pf" x="-53.34" y="-36.83"/>
 
<element name="Y2" library="SparkFun" package="CRYSTAL-SMD-5X3" value="11.0592MHz" x="-55.88" y="-31.75"/>
 
<element name="C15" library="SparkFun" package="0603-CAP" value=".1uF" x="-57.15" y="-40.64"/>
 
<element name="L2" library="SparkFun" package="0603" value="10uH" x="-53.34" y="-40.64"/>
 
<element name="C16" library="SparkFun" package="0603-CAP" value=".1uF" x="-57.15" y="-44.45"/>
 
<element name="C17" library="SparkFun" package="0603-CAP" value=".1uF" x="-57.15" y="-48.26"/>
 
<element name="C18" library="SparkFun" package="0603-CAP" value="10uF" x="-57.15" y="-52.07"/>
 
<element name="ICSP" library="SparkFun" package="2X3-NS" value="AVR_SPI_PRG_6NS" x="-54.61" y="-59.69"/>
 
</elements>
 
<signals>
 
<signal name="VDD">
 
<contactref element="U$1" pad="1"/>
 
</signal>
 
<signal name="GND">
 
<contactref element="U$1" pad="10"/>
 
<contactref element="IC1" pad="18"/>
 
<contactref element="IC1" pad="6"/>
 
<contactref element="IC1" pad="28"/>
 
<contactref element="IC1" pad="39"/>
 
<contactref element="3.3V_SWITCHING" pad="2"/>
 
@@ -916,25 +956,25 @@ design rules under a new name.</descript
 
<wire x1="-58" y1="-48.26" x2="-58" y2="-52.07" width="0" layer="19" extent="1-1"/>
 
<wire x1="-58" y1="-44.45" x2="-58" y2="-48.26" width="0" layer="19" extent="1-1"/>
 
<wire x1="-52.49" y1="-40.64" x2="-58" y2="-44.45" width="0" layer="19" extent="1-1"/>
 
<wire x1="5.02" y1="18.415" x2="-52.49" y2="-40.64" width="0" layer="19" extent="1-1"/>
 
<wire x1="21.01" y1="7.62" x2="5.02" y2="18.415" width="0" layer="19" extent="1-1"/>
 
<wire x1="35.475" y1="20.485" x2="21.01" y2="7.62" width="0" layer="19" extent="1-1"/>
 
<wire x1="42.075" y1="25.485" x2="35.475" y2="20.485" width="0" layer="19" extent="1-1"/>
 
<wire x1="41.275" y1="13.885" x2="35.475" y2="20.485" width="0" layer="19" extent="1-1"/>
 
<wire x1="-28.84" y1="60.96" x2="5.02" y2="18.415" width="0" layer="19" extent="1-1"/>
 
<wire x1="-40.22" y1="60.96" x2="-28.84" y2="60.96" width="0" layer="19" extent="1-1"/>
 
<wire x1="-44.03" y1="60.96" x2="-40.22" y2="60.96" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$1">
 
<signal name="RESET">
 
<contactref element="R1" pad="2"/>
 
<contactref element="IC1" pad="4"/>
 
<wire x1="-42.33" y1="60.96" x2="35.475" y2="21.285" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$2">
 
<contactref element="BATT" pad="1"/>
 
<contactref element="Q6" pad="3"/>
 
<wire x1="5.08" y1="13.8" x2="5.31" y2="3.79" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="VBAT">
 
<contactref element="Q6" pad="2"/>
 
<contactref element="3.3V_SWITCHING" pad="8"/>
 
@@ -989,41 +1029,65 @@ design rules under a new name.</descript
 
<signal name="PA4">
 
<contactref element="IC1" pad="33"/>
 
</signal>
 
<signal name="PA5">
 
<contactref element="IC1" pad="32"/>
 
</signal>
 
<signal name="PA6">
 
<contactref element="IC1" pad="31"/>
 
</signal>
 
<signal name="PA7">
 
<contactref element="IC1" pad="30"/>
 
</signal>
 
<signal name="N$7">
 
<signal name="SCK">
 
<contactref element="IC1" pad="3"/>
 
</signal>
 
<signal name="N$8">
 
<signal name="MISO">
 
<contactref element="IC1" pad="2"/>
 
</signal>
 
<signal name="N$9">
 
<signal name="MOSI">
 
<contactref element="IC1" pad="1"/>
 
</signal>
 
<signal name="N$10">
 
<contactref element="Y2" pad="3"/>
 
<contactref element="C14" pad="2"/>
 
<wire x1="-54.03" y1="-30.6" x2="-52.49" y2="-36.83" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$11">
 
<contactref element="Y2" pad="1"/>
 
<contactref element="C13" pad="2"/>
 
<wire x1="-57.73" y1="-32.9" x2="-56.3" y2="-36.83" width="0" layer="19" extent="1-1"/>
 
</signal>
 
<signal name="N$12">
 
<contactref element="C15" pad="2"/>
 
</signal>
 
<signal name="N$13">
 
<contactref element="L2" pad="1"/>
 
</signal>
 
<signal name="N$7">
 
<contactref element="IC1" pad="44"/>
 
</signal>
 
<signal name="N$8">
 
<contactref element="IC1" pad="43"/>
 
</signal>
 
<signal name="N$9">
 
<contactref element="IC1" pad="42"/>
 
</signal>
 
<signal name="N$14">
 
<contactref element="IC1" pad="41"/>
 
</signal>
 
<signal name="TCK">
 
<contactref element="IC1" pad="21"/>
 
</signal>
 
<signal name="TMS">
 
<contactref element="IC1" pad="22"/>
 
</signal>
 
<signal name="TDO">
 
<contactref element="IC1" pad="23"/>
 
</signal>
 
<signal name="TDI">
 
<contactref element="IC1" pad="24"/>
 
</signal>
 
</signals>
 
</board>
 
</drawing>
 
</eagle>
slave/slave.sch
➞
Show inline comments
 
@@ -1435,24 +1435,162 @@ Basic SMA packaged diode. Good for rever
 
<smd name="NC1" x="6.9" y="1.2" dx="1.2" dy="0.6" layer="1"/>
 
</package>
 
<package name="CRYSTAL-SMD-10.5X4.8-2PIN">
 
<wire x1="-6.2" y1="1.5" x2="-6.2" y2="2.4" width="0.127" layer="21"/>
 
<wire x1="-6.2" y1="2.4" x2="6.2" y2="2.4" width="0.127" layer="21"/>
 
<wire x1="6.2" y1="2.4" x2="6.2" y2="1.5" width="0.127" layer="21"/>
 
<wire x1="-6.2" y1="-1.5" x2="-6.2" y2="-2.4" width="0.127" layer="21"/>
 
<wire x1="-6.2" y1="-2.4" x2="6.2" y2="-2.4" width="0.127" layer="21"/>
 
<wire x1="6.2" y1="-2.4" x2="6.2" y2="-1.5" width="0.127" layer="21"/>
 
<smd name="P$1" x="-4.3" y="0" dx="5.5" dy="1.5" layer="1"/>
 
<smd name="P$2" x="4.3" y="0" dx="5.5" dy="1.5" layer="1"/>
 
</package>
 
<package name="2X3">
 
<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="0.635" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="1.27" y1="-0.635" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="3.175" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="3.81" y1="-0.635" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="5.715" y1="-1.27" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="-1.27" y1="-0.635" x2="-1.27" y2="3.175" width="0.2032" layer="21"/>
 
<wire x1="-1.27" y1="3.175" x2="-0.635" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="-0.635" y1="3.81" x2="0.635" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="0.635" y1="3.81" x2="1.27" y2="3.175" width="0.2032" layer="21"/>
 
<wire x1="1.27" y1="3.175" x2="1.905" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="1.905" y1="3.81" x2="3.175" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="3.175" y1="3.81" x2="3.81" y2="3.175" width="0.2032" layer="21"/>
 
<wire x1="3.81" y1="3.175" x2="4.445" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="4.445" y1="3.81" x2="5.715" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="5.715" y1="3.81" x2="6.35" y2="3.175" width="0.2032" layer="21"/>
 
<wire x1="1.27" y1="3.175" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="3.81" y1="3.175" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="6.35" y1="3.175" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="4.445" y1="-1.27" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="1.905" y1="-1.27" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="-0.635" y1="-1.27" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="0.635" y1="-1.605" x2="-0.635" y2="-1.605" width="0.2032" layer="21"/>
 
<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="2" x="0" y="2.54" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="3" x="2.54" y="0" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="4" x="2.54" y="2.54" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="5" x="5.08" y="0" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="6" x="5.08" y="2.54" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<text x="-1.27" y="4.445" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 
<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
 
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
 
<rectangle x1="-0.254" y1="2.286" x2="0.254" y2="2.794" layer="51"/>
 
<rectangle x1="2.286" y1="2.286" x2="2.794" y2="2.794" layer="51"/>
 
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
 
<rectangle x1="4.826" y1="2.286" x2="5.334" y2="2.794" layer="51"/>
 
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
 
</package>
 
<package name="2X3-NS">
 
<wire x1="-3.81" y1="-1.905" x2="-3.175" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="-1.905" y1="-2.54" x2="-1.27" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="-1.27" y1="-1.905" x2="-0.635" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="0.635" y1="-2.54" x2="1.27" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="1.27" y1="-1.905" x2="1.905" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="3.175" y1="-2.54" x2="3.81" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="-3.81" y1="-1.905" x2="-3.81" y2="1.905" width="0.2032" layer="51"/>
 
<wire x1="-3.81" y1="1.905" x2="-3.175" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="-3.175" y1="2.54" x2="-1.905" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="-1.905" y1="2.54" x2="-1.27" y2="1.905" width="0.2032" layer="51"/>
 
<wire x1="-1.27" y1="1.905" x2="-0.635" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="-0.635" y1="2.54" x2="0.635" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="0.635" y1="2.54" x2="1.27" y2="1.905" width="0.2032" layer="51"/>
 
<wire x1="1.27" y1="1.905" x2="1.905" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="1.905" y1="2.54" x2="3.175" y2="2.54" width="0.2032" layer="51"/>
 
<wire x1="3.175" y1="2.54" x2="3.81" y2="1.905" width="0.2032" layer="51"/>
 
<wire x1="-1.27" y1="1.905" x2="-1.27" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="1.27" y1="1.905" x2="1.27" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="3.81" y1="1.905" x2="3.81" y2="-1.905" width="0.2032" layer="51"/>
 
<wire x1="1.905" y1="-2.54" x2="3.175" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="-0.635" y1="-2.54" x2="0.635" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="-3.175" y1="-2.54" x2="-1.905" y2="-2.54" width="0.2032" layer="51"/>
 
<wire x1="-1.905" y1="-2.875" x2="-3.175" y2="-2.875" width="0.2032" layer="51"/>
 
<pad name="1" x="-2.54" y="-1.27" drill="1.016" diameter="1.8796" shape="square"/>
 
<pad name="2" x="-2.54" y="1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="3" x="0" y="-1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="4" x="0" y="1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="5" x="2.54" y="-1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="6" x="2.54" y="1.27" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<text x="-3.81" y="3.175" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 
<text x="-3.81" y="-4.445" size="1.27" layer="27">&gt;VALUE</text>
 
<rectangle x1="-2.794" y1="-1.524" x2="-2.286" y2="-1.016" layer="51"/>
 
<rectangle x1="-2.794" y1="1.016" x2="-2.286" y2="1.524" layer="51"/>
 
<rectangle x1="-0.254" y1="1.016" x2="0.254" y2="1.524" layer="51"/>
 
<rectangle x1="-0.254" y1="-1.524" x2="0.254" y2="-1.016" layer="51"/>
 
<rectangle x1="2.286" y1="1.016" x2="2.794" y2="1.524" layer="51"/>
 
<rectangle x1="2.286" y1="-1.524" x2="2.794" y2="-1.016" layer="51"/>
 
</package>
 
<package name="2X3_OFFSET">
 
<wire x1="-3.81" y1="-1.905" x2="-3.81" y2="1.905" width="0.2032" layer="21"/>
 
<wire x1="-1.27" y1="1.905" x2="-1.27" y2="-1.905" width="0.2032" layer="21"/>
 
<wire x1="1.27" y1="1.905" x2="1.27" y2="-1.905" width="0.2032" layer="21"/>
 
<wire x1="3.81" y1="1.905" x2="3.81" y2="-1.905" width="0.2032" layer="21"/>
 
<wire x1="-1.905" y1="-4.78" x2="-3.175" y2="-4.78" width="0.2032" layer="21"/>
 
<pad name="1" x="-2.54" y="-1.27" drill="1.1176" diameter="1.8796" shape="offset" rot="R270"/>
 
<pad name="2" x="-2.54" y="1.27" drill="1.1176" diameter="1.8796" shape="offset" rot="R90"/>
 
<pad name="3" x="0" y="-1.27" drill="1.1176" diameter="1.8796" shape="offset" rot="R270"/>
 
<pad name="4" x="0" y="1.27" drill="1.1176" diameter="1.8796" shape="offset" rot="R90"/>
 
<pad name="5" x="2.54" y="-1.27" drill="1.1176" diameter="1.8796" shape="offset" rot="R270"/>
 
<pad name="6" x="2.54" y="1.27" drill="1.1176" diameter="1.8796" shape="offset" rot="R90"/>
 
<text x="-4.445" y="-2.54" size="1.27" layer="25" ratio="10" rot="R90">&gt;NAME</text>
 
<text x="5.715" y="-3.175" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
 
<rectangle x1="-2.794" y1="-1.524" x2="-2.286" y2="-1.016" layer="51"/>
 
<rectangle x1="-2.794" y1="1.016" x2="-2.286" y2="1.524" layer="51"/>
 
<rectangle x1="-0.254" y1="1.016" x2="0.254" y2="1.524" layer="51"/>
 
<rectangle x1="-0.254" y1="-1.524" x2="0.254" y2="-1.016" layer="51"/>
 
<rectangle x1="2.286" y1="1.016" x2="2.794" y2="1.524" layer="51"/>
 
<rectangle x1="2.286" y1="-1.524" x2="2.794" y2="-1.016" layer="51"/>
 
</package>
 
<package name="2X3_LOCK">
 
<wire x1="-1.27" y1="-0.635" x2="-0.635" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="0.635" y1="-1.27" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="1.27" y1="-0.635" x2="1.905" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="3.175" y1="-1.27" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="3.81" y1="-0.635" x2="4.445" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="5.715" y1="-1.27" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="-1.27" y1="-0.635" x2="-1.27" y2="3.175" width="0.2032" layer="21"/>
 
<wire x1="-1.27" y1="3.175" x2="-0.635" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="-0.635" y1="3.81" x2="0.635" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="0.635" y1="3.81" x2="1.27" y2="3.175" width="0.2032" layer="21"/>
 
<wire x1="1.27" y1="3.175" x2="1.905" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="1.905" y1="3.81" x2="3.175" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="3.175" y1="3.81" x2="3.81" y2="3.175" width="0.2032" layer="21"/>
 
<wire x1="3.81" y1="3.175" x2="4.445" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="4.445" y1="3.81" x2="5.715" y2="3.81" width="0.2032" layer="21"/>
 
<wire x1="5.715" y1="3.81" x2="6.35" y2="3.175" width="0.2032" layer="21"/>
 
<wire x1="1.27" y1="3.175" x2="1.27" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="3.81" y1="3.175" x2="3.81" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="6.35" y1="3.175" x2="6.35" y2="-0.635" width="0.2032" layer="21"/>
 
<wire x1="4.445" y1="-1.27" x2="5.715" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="1.905" y1="-1.27" x2="3.175" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="-0.635" y1="-1.27" x2="0.635" y2="-1.27" width="0.2032" layer="21"/>
 
<wire x1="0.635" y1="-1.605" x2="-0.635" y2="-1.605" width="0.2032" layer="21"/>
 
<pad name="1" x="0" y="0" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="2" x="0" y="2.54" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="3" x="2.54" y="-0.254" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="4" x="2.54" y="2.286" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="5" x="5.08" y="0" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<pad name="6" x="5.08" y="2.54" drill="1.016" diameter="1.8796" shape="octagon"/>
 
<text x="-1.27" y="4.445" size="1.27" layer="25" ratio="10">&gt;NAME</text>
 
<text x="-1.27" y="-3.175" size="1.27" layer="27">&gt;VALUE</text>
 
<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
 
<rectangle x1="-0.254" y1="2.286" x2="0.254" y2="2.794" layer="51"/>
 
<rectangle x1="2.286" y1="2.286" x2="2.794" y2="2.794" layer="51"/>
 
<rectangle x1="2.286" y1="-0.254" x2="2.794" y2="0.254" layer="51"/>
 
<rectangle x1="4.826" y1="2.286" x2="5.334" y2="2.794" layer="51"/>
 
<rectangle x1="4.826" y1="-0.254" x2="5.334" y2="0.254" layer="51"/>
 
</package>
 
</packages>
 
<symbols>
 
<symbol name="LETTER_L">
 
<wire x1="0" y1="185.42" x2="248.92" y2="185.42" width="0.4064" layer="94"/>
 
<wire x1="248.92" y1="185.42" x2="248.92" y2="0" width="0.4064" layer="94"/>
 
<wire x1="0" y1="185.42" x2="0" y2="0" width="0.4064" layer="94"/>
 
<wire x1="0" y1="0" x2="248.92" y2="0" width="0.4064" layer="94"/>
 
</symbol>
 
<symbol name="DOCFIELD">
 
<wire x1="0" y1="0" x2="71.12" y2="0" width="0.254" layer="94"/>
 
<wire x1="101.6" y1="15.24" x2="87.63" y2="15.24" width="0.254" layer="94"/>
 
<wire x1="0" y1="0" x2="0" y2="5.08" width="0.254" layer="94"/>
 
@@ -1607,24 +1745,44 @@ Basic SMA packaged diode. Good for rever
 
<wire x1="-0.381" y1="-1.524" x2="0.381" y2="-1.524" width="0.254" layer="94"/>
 
<wire x1="0.381" y1="-1.524" x2="0.381" y2="1.524" width="0.254" layer="94"/>
 
<wire x1="0.381" y1="1.524" x2="-0.381" y2="1.524" width="0.254" layer="94"/>
 
<wire x1="1.016" y1="1.778" x2="1.016" y2="-1.778" width="0.254" layer="94"/>
 
<wire x1="-1.016" y1="1.778" x2="-1.016" y2="-1.778" width="0.254" layer="94"/>
 
<text x="2.54" y="1.016" size="1.778" layer="95">&gt;NAME</text>
 
<text x="2.54" y="-2.54" size="1.778" layer="96">&gt;VALUE</text>
 
<text x="-2.159" y="-1.143" size="0.8636" layer="93">1</text>
 
<text x="1.524" y="-1.143" size="0.8636" layer="93">2</text>
 
<pin name="2" x="2.54" y="0" visible="off" length="point" direction="pas" swaplevel="1" rot="R180"/>
 
<pin name="1" x="-2.54" y="0" visible="off" length="point" direction="pas" swaplevel="1"/>
 
</symbol>
 
<symbol name="AVR_SPI_PROGRAMMER_6">
 
<wire x1="-5.08" y1="-5.08" x2="7.62" y2="-5.08" width="0.4064" layer="94"/>
 
<wire x1="7.62" y1="-5.08" x2="7.62" y2="5.08" width="0.4064" layer="94"/>
 
<wire x1="7.62" y1="5.08" x2="-5.08" y2="5.08" width="0.4064" layer="94"/>
 
<wire x1="-5.08" y1="5.08" x2="-5.08" y2="-5.08" width="0.4064" layer="94"/>
 
<text x="-4.318" y="5.842" size="1.778" layer="95">&gt;NAME</text>
 
<text x="-4.064" y="-7.62" size="1.778" layer="96">&gt;VALUE</text>
 
<text x="8.89" y="0.635" size="1.27" layer="94">MOSI</text>
 
<text x="-11.938" y="-2.032" size="1.27" layer="94">RESET</text>
 
<text x="-11.938" y="0.508" size="1.27" layer="94">SCK</text>
 
<text x="-11.938" y="3.302" size="1.27" layer="94">MISO</text>
 
<text x="8.89" y="3.048" size="1.27" layer="94">+5</text>
 
<text x="8.89" y="-2.032" size="1.27" layer="94">GND</text>
 
<pin name="1" x="-7.62" y="2.54" visible="pad" direction="pas" function="dot"/>
 
<pin name="2" x="10.16" y="2.54" visible="pad" direction="pas" function="dot" rot="R180"/>
 
<pin name="3" x="-7.62" y="0" visible="pad" direction="pas" function="dot"/>
 
<pin name="4" x="10.16" y="0" visible="pad" direction="pas" function="dot" rot="R180"/>
 
<pin name="5" x="-7.62" y="-2.54" visible="pad" direction="pas" function="dot"/>
 
<pin name="6" x="10.16" y="-2.54" visible="pad" direction="pas" function="dot" rot="R180"/>
 
</symbol>
 
</symbols>
 
<devicesets>
 
<deviceset name="FRAME-LETTER" prefix="FRAME">
 
<description>&lt;b&gt;Schematic Frame&lt;/b&gt;&lt;p&gt;
 
Standard 8.5x11 US Letter frame</description>
 
<gates>
 
<gate name="G$1" symbol="LETTER_L" x="0" y="0"/>
 
<gate name="G$2" symbol="DOCFIELD" x="147.32" y="0" addlevel="must"/>
 
</gates>
 
<devices>
 
<device name="">
 
<technologies>
 
@@ -2388,24 +2546,85 @@ Various standard crystals. Proven footpr
 
</device>
 
<device name="10.5X4.8" package="CRYSTAL-SMD-10.5X4.8-2PIN">
 
<connects>
 
<connect gate="G$1" pin="1" pad="P$1"/>
 
<connect gate="G$1" pin="2" pad="P$2"/>
 
</connects>
 
<technologies>
 
<technology name=""/>
 
</technologies>
 
</device>
 
</devices>
 
</deviceset>
 
<deviceset name="AVR_SPI_PRG_6" prefix="J">
 
<description>&lt;b&gt;AVR ISP 6 Pin&lt;/b&gt;
 
This is the reduced ISP connector for AVR programming. Common on Arduino. This footprint will take up less PCB space and can be used with a 10-pin to 6-pin adapter such as SKU: BOB-08508</description>
 
<gates>
 
<gate name="G$1" symbol="AVR_SPI_PROGRAMMER_6" x="0" y="0"/>
 
</gates>
 
<devices>
 
<device name="PTH" package="2X3">
 
<connects>
 
<connect gate="G$1" pin="1" pad="1"/>
 
<connect gate="G$1" pin="2" pad="2"/>
 
<connect gate="G$1" pin="3" pad="3"/>
 
<connect gate="G$1" pin="4" pad="4"/>
 
<connect gate="G$1" pin="5" pad="5"/>
 
<connect gate="G$1" pin="6" pad="6"/>
 
</connects>
 
<technologies>
 
<technology name=""/>
 
</technologies>
 
</device>
 
<device name="NS" package="2X3-NS">
 
<connects>
 
<connect gate="G$1" pin="1" pad="1"/>
 
<connect gate="G$1" pin="2" pad="2"/>
 
<connect gate="G$1" pin="3" pad="3"/>
 
<connect gate="G$1" pin="4" pad="4"/>
 
<connect gate="G$1" pin="5" pad="5"/>
 
<connect gate="G$1" pin="6" pad="6"/>
 
</connects>
 
<technologies>
 
<technology name=""/>
 
</technologies>
 
</device>
 
<device name="OFFSET_PADS" package="2X3_OFFSET">
 
<connects>
 
<connect gate="G$1" pin="1" pad="1"/>
 
<connect gate="G$1" pin="2" pad="2"/>
 
<connect gate="G$1" pin="3" pad="3"/>
 
<connect gate="G$1" pin="4" pad="4"/>
 
<connect gate="G$1" pin="5" pad="5"/>
 
<connect gate="G$1" pin="6" pad="6"/>
 
</connects>
 
<technologies>
 
<technology name=""/>
 
</technologies>
 
</device>
 
<device name="2X3_LOCK" package="2X3_LOCK">
 
<connects>
 
<connect gate="G$1" pin="1" pad="1"/>
 
<connect gate="G$1" pin="2" pad="2"/>
 
<connect gate="G$1" pin="3" pad="3"/>
 
<connect gate="G$1" pin="4" pad="4"/>
 
<connect gate="G$1" pin="5" pad="5"/>
 
<connect gate="G$1" pin="6" pad="6"/>
 
</connects>
 
<technologies>
 
<technology name=""/>
 
</technologies>
 
</device>
 
</devices>
 
</deviceset>
 
</devicesets>
 
</library>
 
<library name="atmel">
 
<description>&lt;b&gt;AVR Devices&lt;/b&gt;&lt;p&gt;
 
Configurable logic, microcontrollers, nonvolatile memories&lt;p&gt;
 
Based on the following sources:&lt;p&gt;
 
&lt;ul&gt;
 
&lt;li&gt;www.atmel.com
 
&lt;li&gt;CD-ROM : Configurable Logic Microcontroller Nonvolatile Memory
 
&lt;li&gt;CadSoft download site, www.cadsoft.de or www.cadsoftusa.com , file at90smcu_v400.zip
 
&lt;li&gt;avr.lbr
 
&lt;/ul&gt;
 
@@ -3176,42 +3395,55 @@ www.irf.com&lt;p&gt;
 
<part name="C13" library="SparkFun" deviceset="CAP" device="0603-CAP" value="18pf"/>
 
<part name="C14" library="SparkFun" deviceset="CAP" device="0603-CAP" value="18pf"/>
 
<part name="GND11" library="SparkFun" deviceset="GND" device=""/>
 
<part name="Y2" library="SparkFun" deviceset="CRYSTAL" device="5X3" value="11.0592MHz"/>
 
<part name="P+5" library="SparkFun" deviceset="VCC" device=""/>
 
<part name="C15" library="SparkFun" deviceset="CAP" device="0603-CAP" value=".1uF"/>
 
<part name="GND12" library="SparkFun" deviceset="GND" device=""/>
 
<part name="L2" library="SparkFun" deviceset="INDUCTOR" device="0603" value="10uH"/>
 
<part name="C16" library="SparkFun" deviceset="CAP" device="0603-CAP" value=".1uF"/>
 
<part name="C17" library="SparkFun" deviceset="CAP" device="0603-CAP" value=".1uF"/>
 
<part name="C18" library="SparkFun" deviceset="CAP" device="0603-CAP" value="10uF"/>
 
<part name="GND15" library="SparkFun" deviceset="GND" device=""/>
 
<part name="ICSP" library="SparkFun" deviceset="AVR_SPI_PRG_6" device="NS"/>
 
</parts>
 
<sheets>
 
<sheet>
 
<plain>
 
<text x="162.814" y="26.416" size="5.08" layer="94" font="vector">Slave Motherboard</text>
 
<wire x1="0" y1="53.34" x2="129.54" y2="53.34" width="0.3048" layer="94"/>
 
<text x="40.894" y="46.736" size="5.08" layer="94" font="vector">Power Supply</text>
 
<wire x1="129.54" y1="53.34" x2="129.54" y2="106.68" width="0.3048" layer="94"/>
 
<wire x1="129.54" y1="106.68" x2="129.54" y2="185.42" width="0.3048" layer="94"/>
 
<wire x1="129.54" y1="106.68" x2="71.12" y2="106.68" width="0.3048" layer="94"/>
 
<text x="58.674" y="100.076" size="5.08" layer="94" font="vector">USART</text>
 
<text x="183.134" y="176.276" size="5.08" layer="94" font="vector">ATMEGA</text>
 
<text x="94.234" y="178.816" size="5.08" layer="94" font="vector">Headers</text>
 
<text x="15.494" y="176.276" size="5.08" layer="94" font="vector">MISC??</text>
 
<wire x1="71.12" y1="106.68" x2="0" y2="106.68" width="0.3048" layer="94"/>
 
<wire x1="71.12" y1="185.42" x2="71.12" y2="106.68" width="0.3048" layer="94"/>
 
<wire x1="147.32" y1="35.56" x2="147.32" y2="53.34" width="0.3048" layer="94"/>
 
<wire x1="147.32" y1="53.34" x2="129.54" y2="53.34" width="0.3048" layer="94"/>
 
<wire x1="237.236" y1="106.172" x2="239.776" y2="106.172" width="0.1524" layer="94"/>
 
<wire x1="239.776" y1="106.172" x2="239.776" y2="101.092" width="0.1524" layer="94"/>
 
<wire x1="237.236" y1="96.012" x2="239.776" y2="96.012" width="0.1524" layer="94"/>
 
<wire x1="239.776" y1="96.012" x2="239.776" y2="101.092" width="0.1524" layer="94"/>
 
<wire x1="239.776" y1="101.092" x2="242.316" y2="101.092" width="0.1524" layer="94"/>
 
<text x="242.824" y="100.076" size="1.778" layer="94">JTAG</text>
 
<wire x1="237.236" y1="95.504" x2="239.776" y2="95.504" width="0.1524" layer="94"/>
 
<wire x1="239.776" y1="95.504" x2="239.776" y2="93.218" width="0.1524" layer="94"/>
 
<wire x1="237.236" y1="91.186" x2="239.776" y2="91.186" width="0.1524" layer="94"/>
 
<wire x1="239.776" y1="91.186" x2="239.776" y2="93.218" width="0.1524" layer="94"/>
 
<wire x1="239.776" y1="93.218" x2="242.316" y2="93.218" width="0.1524" layer="94"/>
 
<text x="242.824" y="92.456" size="1.778" layer="94">I2C</text>
 
</plain>
 
<instances>
 
<instance part="FRAME1" gate="G$1" x="0" y="0"/>
 
<instance part="FRAME1" gate="G$2" x="147.32" y="0"/>
 
<instance part="U$1" gate="G$1" x="101.6" y="81.28"/>
 
<instance part="IC1" gate="G$1" x="200.66" y="111.76"/>
 
<instance part="P+1" gate="1" x="157.48" y="167.64"/>
 
<instance part="GND1" gate="1" x="53.34" y="66.04"/>
 
<instance part="R1" gate="G$1" x="165.1" y="142.24"/>
 
<instance part="GND2" gate="1" x="165.1" y="60.96"/>
 
<instance part="GND3" gate="1" x="58.42" y="154.94"/>
 
<instance part="P+2" gate="1" x="43.18" y="167.64"/>
 
@@ -3266,24 +3498,25 @@ www.irf.com&lt;p&gt;
 
<instance part="Y2" gate="G$1" x="147.32" y="132.08" smashed="yes" rot="R180">
 
<attribute name="NAME" x="139.7" y="131.064" size="1.778" layer="95" rot="R180"/>
 
<attribute name="VALUE" x="139.7" y="134.62" size="1.778" layer="96" rot="R180"/>
 
</instance>
 
<instance part="P+5" gate="1" x="162.56" y="96.52"/>
 
<instance part="C15" gate="G$1" x="165.1" y="124.46" rot="R180"/>
 
<instance part="GND12" gate="1" x="165.1" y="111.76"/>
 
<instance part="L2" gate="G$1" x="170.18" y="104.14"/>
 
<instance part="C16" gate="G$1" x="152.4" y="154.94"/>
 
<instance part="C17" gate="G$1" x="142.24" y="154.94"/>
 
<instance part="C18" gate="G$1" x="132.08" y="154.94"/>
 
<instance part="GND15" gate="1" x="142.24" y="142.24"/>
 
<instance part="ICSP" gate="G$1" x="228.6" y="175.26"/>
 
</instances>
 
<busses>
 
</busses>
 
<nets>
 
<net name="VCC" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="VCC@2"/>
 
<wire x1="172.72" y1="149.86" x2="157.48" y2="149.86" width="0.1524" layer="91"/>
 
<wire x1="157.48" y1="149.86" x2="157.48" y2="152.4" width="0.1524" layer="91"/>
 
<pinref part="IC1" gate="G$1" pin="VCC@1"/>
 
<wire x1="172.72" y1="152.4" x2="157.48" y2="152.4" width="0.1524" layer="91"/>
 
<wire x1="157.48" y1="152.4" x2="157.48" y2="154.94" width="0.1524" layer="91"/>
 
@@ -3299,25 +3532,24 @@ www.irf.com&lt;p&gt;
 
<wire x1="157.48" y1="142.24" x2="160.02" y2="142.24" width="0.1524" layer="91"/>
 
<junction x="157.48" y="149.86"/>
 
<pinref part="C18" gate="G$1" pin="1"/>
 
<wire x1="132.08" y1="160.02" x2="132.08" y2="162.56" width="0.1524" layer="91"/>
 
<pinref part="C17" gate="G$1" pin="1"/>
 
<wire x1="132.08" y1="162.56" x2="142.24" y2="162.56" width="0.1524" layer="91"/>
 
<wire x1="142.24" y1="160.02" x2="142.24" y2="162.56" width="0.1524" layer="91"/>
 
<pinref part="C16" gate="G$1" pin="1"/>
 
<wire x1="142.24" y1="162.56" x2="152.4" y2="162.56" width="0.1524" layer="91"/>
 
<wire x1="152.4" y1="162.56" x2="152.4" y2="160.02" width="0.1524" layer="91"/>
 
<junction x="142.24" y="162.56"/>
 
<wire x1="142.24" y1="162.56" x2="142.24" y2="165.1" width="0.1524" layer="91"/>
 
<label x="137.16" y="167.64" size="1.778" layer="95"/>
 
<wire x1="142.24" y1="165.1" x2="157.48" y2="165.1" width="0.1524" layer="91"/>
 
<junction x="157.48" y="165.1"/>
 
</segment>
 
<segment>
 
<pinref part="L3" gate="G$1" pin="2"/>
 
<pinref part="P+3" gate="1" pin="VCC"/>
 
<wire x1="109.22" y1="35.56" x2="111.76" y2="35.56" width="0.1524" layer="91"/>
 
<wire x1="111.76" y1="35.56" x2="111.76" y2="40.64" width="0.1524" layer="91"/>
 
</segment>
 
<segment>
 
<pinref part="P+4" gate="1" pin="VCC"/>
 
<wire x1="93.98" y1="22.86" x2="93.98" y2="20.32" width="0.1524" layer="91"/>
 
@@ -3333,29 +3565,30 @@ www.irf.com&lt;p&gt;
 
<wire x1="99.06" y1="20.32" x2="99.06" y2="17.78" width="0.1524" layer="91"/>
 
<junction x="88.9" y="20.32"/>
 
<junction x="93.98" y="20.32"/>
 
</segment>
 
<segment>
 
<pinref part="P+5" gate="1" pin="VCC"/>
 
<wire x1="162.56" y1="96.52" x2="162.56" y2="93.98" width="0.1524" layer="91"/>
 
<pinref part="L2" gate="G$1" pin="2"/>
 
<wire x1="162.56" y1="93.98" x2="170.18" y2="93.98" width="0.1524" layer="91"/>
 
<wire x1="170.18" y1="93.98" x2="170.18" y2="96.52" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="N$1" class="0">
 
<net name="RESET" class="0">
 
<segment>
 
<pinref part="R1" gate="G$1" pin="2"/>
 
<pinref part="IC1" gate="G$1" pin="RESET"/>
 
<wire x1="170.18" y1="142.24" x2="172.72" y2="142.24" width="0.1524" layer="91"/>
 
<label x="167.64" y="144.78" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="GND" class="0">
 
<segment>
 
<pinref part="3.3V_SWITCHING" gate="G$1" pin="GND"/>
 
<pinref part="GND6" gate="1" pin="GND"/>
 
<wire x1="40.64" y1="25.4" x2="38.1" y2="25.4" width="0.1524" layer="91"/>
 
<wire x1="38.1" y1="25.4" x2="38.1" y2="20.32" width="0.1524" layer="91"/>
 
<pinref part="C8" gate="G$1" pin="2"/>
 
<wire x1="38.1" y1="20.32" x2="38.1" y2="17.78" width="0.1524" layer="91"/>
 
<wire x1="27.94" y1="22.86" x2="27.94" y2="20.32" width="0.1524" layer="91"/>
 
<wire x1="27.94" y1="20.32" x2="38.1" y2="20.32" width="0.1524" layer="91"/>
 
@@ -3576,40 +3809,43 @@ www.irf.com&lt;p&gt;
 
<pinref part="IC1" gate="G$1" pin="(PCINT6/ADC6)PA6"/>
 
<wire x1="226.06" y1="152.4" x2="236.22" y2="152.4" width="0.1524" layer="91"/>
 
<label x="231.14" y="152.4" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="PA7" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT7/ADC7)PA7"/>
 
<wire x1="226.06" y1="154.94" x2="236.22" y2="154.94" width="0.1524" layer="91"/>
 
<label x="231.14" y="154.94" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="N$7" class="0">
 
<net name="SCK" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT15/SCK)PB7"/>
 
<wire x1="226.06" y1="132.08" x2="236.22" y2="132.08" width="0.1524" layer="91"/>
 
<label x="231.14" y="132.08" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="N$8" class="0">
 
<net name="MISO" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT14/MISO)PB6"/>
 
<wire x1="226.06" y1="129.54" x2="236.22" y2="129.54" width="0.1524" layer="91"/>
 
<label x="231.14" y="129.54" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="N$9" class="0">
 
<net name="MOSI" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT13/MOSI)PB5"/>
 
<wire x1="226.06" y1="127" x2="236.22" y2="127" width="0.1524" layer="91"/>
 
<label x="231.14" y="127" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="N$10" class="0">
 
<segment>
 
<wire x1="172.72" y1="137.16" x2="142.24" y2="137.16" width="0.1524" layer="91"/>
 
<wire x1="142.24" y1="137.16" x2="142.24" y2="132.08" width="0.1524" layer="91"/>
 
<pinref part="Y2" gate="G$1" pin="2"/>
 
<wire x1="142.24" y1="132.08" x2="144.78" y2="132.08" width="0.1524" layer="91"/>
 
<pinref part="C14" gate="G$1" pin="2"/>
 
<wire x1="142.24" y1="132.08" x2="142.24" y2="127" width="0.1524" layer="91"/>
 
<junction x="142.24" y="132.08"/>
 
</segment>
 
@@ -3630,18 +3866,70 @@ www.irf.com&lt;p&gt;
 
<wire x1="172.72" y1="129.54" x2="165.1" y2="129.54" width="0.1524" layer="91"/>
 
<wire x1="165.1" y1="129.54" x2="165.1" y2="127" width="0.1524" layer="91"/>
 
<pinref part="C15" gate="G$1" pin="2"/>
 
</segment>
 
</net>
 
<net name="N$13" class="0">
 
<segment>
 
<pinref part="L2" gate="G$1" pin="1"/>
 
<wire x1="170.18" y1="111.76" x2="170.18" y2="127" width="0.1524" layer="91"/>
 
<wire x1="170.18" y1="127" x2="172.72" y2="127" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="N$7" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT12/OC0B/!SS!)PB4"/>
 
<wire x1="226.06" y1="124.46" x2="236.22" y2="124.46" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="N$8" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT11/OC0A/AIN1)PB3"/>
 
<wire x1="226.06" y1="121.92" x2="236.22" y2="121.92" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="N$9" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT10/INT2/AIN0)PB2"/>
 
<wire x1="226.06" y1="119.38" x2="236.22" y2="119.38" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="N$14" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT9/CLKO/T1)PB1"/>
 
<wire x1="226.06" y1="116.84" x2="236.22" y2="116.84" width="0.1524" layer="91"/>
 
</segment>
 
</net>
 
<net name="TCK" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT18/TCK)PC2"/>
 
<wire x1="226.06" y1="96.52" x2="236.22" y2="96.52" width="0.1524" layer="91"/>
 
<label x="231.14" y="96.52" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="TMS" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT19/TMS)PC3"/>
 
<wire x1="226.06" y1="99.06" x2="236.22" y2="99.06" width="0.1524" layer="91"/>
 
<label x="231.14" y="99.06" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="TDO" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT20/TDO)PC4"/>
 
<wire x1="226.06" y1="101.6" x2="236.22" y2="101.6" width="0.1524" layer="91"/>
 
<label x="231.14" y="101.6" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
<net name="TDI" class="0">
 
<segment>
 
<pinref part="IC1" gate="G$1" pin="(PCINT21/TDI)PC5"/>
 
<wire x1="226.06" y1="104.14" x2="236.22" y2="104.14" width="0.1524" layer="91"/>
 
<label x="231.14" y="104.14" size="1.778" layer="95"/>
 
</segment>
 
</net>
 
</nets>
 
</sheet>
 
</sheets>
 
</schematic>
 
</drawing>
 
</eagle>
0 comments (0 inline, 0 general)
Server instance: zserverv-756375 This site is powered by Kallithea, which is © 2010–2021 by various authors & licensed under GPLv3. – Support