seniordesign-hardware Changeset - bb2b016775cf

Changeset - bb2b016775cf

Parent rev.

Child rev.

[Not reviewed]

default

0 3 0

ethanzonca@CL-SEC241-08.cedarville.edu - 12 years ago 2012-11-01 20:31:43
ethanzonca@CL-SEC241-08.cedarville.edu

Master fixes and updated design rules

3 files changed with 674 insertions and 274 deletions:

dru/LaenPCBOrder.dru

master/master.brd

141

137

master/master.sch

464

0 comments (0 inline, 0 general)

dru/LaenPCBOrder.dru

➞

Show inline comments

 description[de] = <b>EAGLE Design Rules</b>\n<p>\nDie Standard-Design-Rules sind so gewählt, dass sie für \ndie meisten Anwendungen passen. Sollte ihre Platine \nbesondere Anforderungen haben, treffen Sie die erforderlichen\nEinstellungen hier und speichern die Design Rules unter \neinem neuen Namen ab.
 description[en] = <b>Laen's PCB Order Design Rules</b>\n<p>\nPlease make sure your boards conform to these design rules.
 layerSetup = (1*16)
 mtCopper = 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm
 mtIsolate = 1.5011mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm
 mdWireWire = 6mil
 mdWirePad = 6mil
 mdWireVia = 6mil
 mdPadPad = 6mil
 mdPadVia = 6mil
 mdViaVia = 6mil
 mdSmdPad = 6mil
 mdSmdVia = 6mil
 mdSmdSmd = 6mil
 mdViaViaSameLayer = 8mil
 mnLayersViaInSmd = 2
 mdCopperDimension = 15mil
 mdDrill = 6mil
 mdSmdStop = 0mil
 msWidth = 6mil
 msDrill = 13mil
 msMicroVia = 13mil
 msBlindViaRatio = 0.500000
 rvPadTop = 0.250000
 rvPadInner = 0.250000
 rvPadBottom = 0.250000
 rvViaOuter = 0.250000
 rvViaInner = 0.250000
 rvMicroViaOuter = 0.250000
 rvMicroViaInner = 0.250000
 rlMinPadTop = 7mil
 rlMaxPadTop = 20mil
 rlMinPadInner = 7mil
 rlMaxPadInner = 20mil
 rlMinPadBottom = 7mil
 rlMaxPadBottom = 20mil
 rlMinViaOuter = 7mil
 rlMaxViaOuter = 20mil
 rlMinViaInner = 7mil
 rlMaxViaInner = 20mil
 rlMinMicroViaOuter = 4mil
 rlMaxMicroViaOuter = 20mil
 rlMinMicroViaInner = 4mil
 rlMaxMicroViaInner = 20mil
 psTop = -1
 psBottom = -1
 psFirst = -1
 psElongationLong = 100
 psElongationOffset = 100
 mvStopFrame = 1.000000
 mvCreamFrame = 0.000000
 mlMinStopFrame = 4mil
 mlMaxStopFrame = 4mil
 mlMinCreamFrame = 0mil
 mlMaxCreamFrame = 0mil
 mlViaStopLimit = 0mil
 srRoundness = 0.000000
 srMinRoundness = 0mil
 srMaxRoundness = 0mil
 slThermalGap = 0.500000
 slMinThermalGap = 20mil
 slMaxThermalGap = 100mil
 slAnnulusIsolate = 20mil
 slThermalIsolate = 10mil
 slAnnulusRestring = 0
 slThermalRestring = 1
 slThermalsForVias = 0
 checkGrid = 0
 checkAngle = 0
 checkFont = 1
 checkRestrict = 1
 useDiameter = 13
 maxErrors = 50
 description[de] = <b>EAGLE Design Rules</b>\n<p>\nDie Standard-Design-Rules sind so gewählt, dass sie für \ndie meisten Anwendungen passen. Sollte ihre Platine \nbesondere Anforderungen haben, treffen Sie die erforderlichen\nEinstellungen hier und speichern die Design Rules unter \neinem neuen Namen ab.
 description[en] = <b>Laen's PCB Order Design Rules</b>\n<p>\nPlease make sure your boards conform to these design rules.
 layerSetup = (1*16)
 mtCopper = 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm
 mtIsolate = 1.5011mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm
 mdWireWire = 6mil
 mdWirePad = 6mil
 mdWireVia = 6mil
 mdPadPad = 6mil
 mdPadVia = 6mil
 mdViaVia = 6mil
 mdSmdPad = 6mil
 mdSmdVia = 6mil
 mdSmdSmd = 6mil
 mdViaViaSameLayer = 8mil
 mnLayersViaInSmd = 2
 mdCopperDimension = 15mil
 mdDrill = 6mil
 mdSmdStop = 0mil
 msWidth = 6mil
 msDrill = 6mil
 msMicroVia = 6mil
 msBlindViaRatio = 0.500000
 rvPadTop = 0.250000
 rvPadInner = 0.250000
 rvPadBottom = 0.250000
 rvViaOuter = 0.250000
 rvViaInner = 0.250000
 rvMicroViaOuter = 0.250000
 rvMicroViaInner = 0.250000
 rlMinPadTop = 7mil
 rlMaxPadTop = 20mil
 rlMinPadInner = 7mil
 rlMaxPadInner = 20mil
 rlMinPadBottom = 7mil
 rlMaxPadBottom = 20mil
 rlMinViaOuter = 7mil
 rlMaxViaOuter = 20mil
 rlMinViaInner = 7mil
 rlMaxViaInner = 20mil
 rlMinMicroViaOuter = 4mil
 rlMaxMicroViaOuter = 20mil
 rlMinMicroViaInner = 4mil
 rlMaxMicroViaInner = 20mil
 psTop = -1
 psBottom = -1
 psFirst = -1
 psElongationLong = 100
 psElongationOffset = 100
 mvStopFrame = 1.000000
 mvCreamFrame = 0.000000
 mlMinStopFrame = 4mil
 mlMaxStopFrame = 4mil
 mlMinCreamFrame = 0mil
 mlMaxCreamFrame = 0mil
 mlViaStopLimit = 0mil
 srRoundness = 0.000000
 srMinRoundness = 0mil
 srMaxRoundness = 0mil
 slThermalIsolate = 10mil
 slThermalsForVias = 0
 dpMaxLengthDifference = 10mm
 dpGapFactor = 2.500000
 checkGrid = 0
 checkAngle = 0
 checkFont = 1
 checkRestrict = 1
 useDiameter = 13
 maxErrors = 50

master/master.brd

➞

Show inline comments

@@ @@ -9,7 +9,7 @@ @@
 <grid distance="0.05" unitdist="inch" unit="mil" style="lines" multiple="1" display="no" altdistance="12.5" altunitdist="mil" altunit="mil"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
@@ @@ -134,7 +134,7 @@ @@
 <hole x="3.175" y="3.175" drill="3.2"/>
 <hole x="3.175" y="50.165" drill="3.2"/>
 <hole x="50.165" y="50.165" drill="3.2"/>
-<hole x="49.53" y="3.175" drill="3.2"/>
+<hole x="49.8475" y="3.175" drill="3.2"/>
 <circle x="46.99" y="31.115" radius="0.127" width="0.4064" layer="21"/>
 <circle x="24.4475" y="39.0525" radius="0.127" width="0.4064" layer="21"/>
 <text x="10.16" y="59.69" size="1.778" layer="21">TODO: USE NICK"S THING</text>
@@ @@ -553,43 +553,41 @@ Based on the following sources:<p> @@
 </library>
 <library name="con-coax">
 <packages>
 <package name="BU-SMA-H">
 <description>FEMALE &lt;b&gt;SMA CONNECTOR&lt;/b&gt;&lt;p&gt;
 Radiall&lt;p&gt;</description>
 <wire x1="-1.1" y1="3.2" x2="1.1" y2="3.2" width="0.2032" layer="21"/>
 <wire x1="3.2" y1="1.1" x2="3.2" y2="-1.1" width="0.2032" layer="21"/>
 <wire x1="1.1" y1="-3.2" x2="-1.1" y2="-3.2" width="0.2032" layer="21"/>
 <wire x1="-3.2" y1="-1.1" x2="-3.2" y2="1.1" width="0.2032" layer="21"/>
 <wire x1="-3.1999" y1="3.1999" x2="3.2" y2="3.2" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="3.2" x2="3.2" y2="2.9" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="2.9" x2="3.2" y2="-2.9" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="-2.9" x2="3.1999" y2="-3.1999" width="0.2032" layer="51"/>
 <wire x1="3.1999" y1="-3.1999" x2="-3.2" y2="-3.2" width="0.2032" layer="51"/>
 <wire x1="-3.2" y1="-3.2" x2="-3.1999" y2="3.1999" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="2.9" x2="4.3" y2="2.9" width="0.2032" layer="51"/>
 <wire x1="4.3" y1="2.9" x2="8.3" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="2.9" x2="8.6" y2="3.4" width="0.2032" layer="21"/>
 <wire x1="10.7" y1="3.4" x2="11" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="11" y1="2.9" x2="11.6" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="11.6" y1="-2.9" x2="11.6" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.6" y1="3.4" x2="10.7" y2="3.4" width="0.2032" layer="21"/>
 <wire x1="3.2" y1="-2.9" x2="4.3" y2="-2.9" width="0.2032" layer="51"/>
 <wire x1="4.3" y1="-2.9" x2="8.3" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="-2.9" x2="8.6" y2="-3.4" width="0.2032" layer="21"/>
 <wire x1="10.7" y1="-3.4" x2="11" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="11" y1="-2.9" x2="11.6" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="8.6" y1="-3.4" x2="10.7" y2="-3.4" width="0.2032" layer="21"/>
 <wire x1="11" y1="-2.9" x2="11" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="-2.9" x2="8.3" y2="2.9" width="0.2032" layer="21"/>
 <circle x="0" y="0" radius="3.1999" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.7" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="1.27"/>
 <pad name="2" x="-2.5499" y="2.5499" drill="1.778"/>
 <pad name="3" x="2.5499" y="2.5499" drill="1.778"/>
 <pad name="4" x="2.5499" y="-2.5499" drill="1.778"/>
 <pad name="5" x="-2.5499" y="-2.5499" drill="1.778"/>
 <text x="-2.54" y="4.445" size="1.27" layer="25">&gt;NAME</text>
 <text x="-3.175" y="-5.715" size="1.27" layer="27">&gt;VALUE</text>
 <package name="J502-ND-142-0711-821/826">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.1" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-4.65" x2="4.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.1" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="3.85" x2="4.1" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.1154" y="0" dx="4.191" dy="1.778" layer="1"/>
 <smd name="G@1" x="2.1154" y="3.4946" dx="4.191" dy="2.667" layer="1"/>
 <smd name="G@2" x="2.1154" y="-3.4946" dx="4.191" dy="2.667" layer="1"/>
 <smd name="G@4" x="2.1154" y="-3.4946" dx="4.191" dy="2.667" layer="16"/>
 <smd name="G@3" x="2.1154" y="3.4946" dx="4.191" dy="2.667" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 </packages>
 </library>
@@ @@ -926,12 +924,12 @@ www.irf.com<p> @@
 <variantdefs>
 </variantdefs>
 <classes>
-<class number="0" name="default" width="0.2032" drill="0.3048">
 <class number="0" name="default" width="0.2032" drill="0">
 <clearance class="0" value="0.2032"/>
 </class>
 <class number="1" name="power" width="0.508" drill="0">
 </class>
-<class number="2" name="20" width="0.508" drill="0">
+<class number="2" name="whatisthis" width="0.508" drill="0">
 </class>
 </classes>
 <designrules name="LaenPCBOrder *">
@@ @@ -1159,24 +1157,12 @@ Please make sure your boards conform to @@
 <element name="C21" library="SparkFun" package="0603-CAP" value="0.1uF" x="21.59" y="35.2425" rot="R90"/>
 <element name="C20" library="SparkFun" package="0603-CAP" value="10uF" x="26.9875" y="39.6875" rot="R180"/>
 <element name="U3" library="Seeed" package="NEO-5Q" value="NEO-5Q" x="3.175" y="12.7" rot="R90"/>
 <element name="R23" library="SparkFun" package="0603-RES" value="10R" x="6.985" y="26.9875"/>
 <element name="L5" library="SparkFun" package="C0402" value="27nH" x="6.985" y="28.575"/>
 <element name="R23" library="SparkFun" package="0603-RES" value="10R" x="7.3025" y="26.67"/>
 <element name="L5" library="SparkFun" package="C0402" value="27nH" x="7.46125" y="28.2575"/>
 <element name="U7" library="SeniorDesign" package="SOT23-5" value="24AA32AFT" x="10.795" y="9.525" rot="R180"/>
 <element name="U$7" library="SeniorDesign" package="MS412FE-FL26E" value="MS412FE-FL26E" x="6.35" y="8.89" rot="R180"/>
 <element name="D2" library="SparkFun" package="SOD-323" value="SCHOTTKEY" x="15.24" y="10.16"/>
 <element name="R3" library="SparkFun" package="0603-RES" value="220R" x="19.05" y="8.89" rot="R270"/>
 <element name="X5" library="con-coax" package="BU-SMA-H" value="BU-SMA-H" x="4.445" y="33.655" rot="R180">
 <attribute name="OC_NEWARK" value="unknown" x="4.445" y="33.655" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="MPN" value="" x="4.445" y="33.655" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="MF" value="" x="4.445" y="33.655" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="OC_FARNELL" value="unknown" x="4.445" y="33.655" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
 <element name="X2" library="con-coax" package="BU-SMA-H" value="BU-SMA-H" x="4.445" y="44.45" rot="R180">
 <attribute name="OC_NEWARK" value="unknown" x="4.445" y="44.45" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="MPN" value="" x="4.445" y="44.45" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="MF" value="" x="4.445" y="44.45" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="OC_FARNELL" value="unknown" x="4.445" y="44.45" size="1.778" layer="27" rot="R180" display="off"/>
 </element>
 <element name="AUX0" library="adafruit" package="CHIPLED_0603" value="ORANGE" x="29.21" y="26.67" rot="R90"/>
 <element name="R13" library="SparkFun" package="0603-RES" value="10k" x="29.21" y="27.94"/>
 <element name="AUX1" library="adafruit" package="CHIPLED_0603" value="VIOLET" x="25.4" y="26.67" rot="R90"/>
@@ @@ -1202,6 +1188,18 @@ Please make sure your boards conform to @@
 <element name="C22" library="SparkFun" package="0603-CAP" value="10uF" x="4.445" y="23.8125" rot="MR90"/>
 <element name="R6" library="SparkFun" package="0603-RES" value="100k" x="26.035" y="10.16"/>
 <element name="R12" library="SparkFun" package="0603-ARV" value="4.7k" x="26.035" y="7.62" rot="R90"/>
 <element name="X1" library="con-coax" package="J502-ND-142-0711-821/826" value="SMA-142-0711-821/826" x="0" y="42.545">
 <attribute name="OC_NEWARK" value="16F3627" x="0" y="42.545" size="1.778" layer="27" display="off"/>
 <attribute name="MPN" value="142-0711-821" x="0" y="42.545" size="1.778" layer="27" display="off"/>
 <attribute name="MF" value="JOHNSON COMPONENTS" x="0" y="42.545" size="1.778" layer="27" display="off"/>
 <attribute name="OC_FARNELL" value="1019328" x="0" y="42.545" size="1.778" layer="27" display="off"/>
 </element>
 <element name="X3" library="con-coax" package="J502-ND-142-0711-821/826" value="SMA-142-0711-821/826" x="0" y="32.385">
 <attribute name="OC_NEWARK" value="16F3627" x="0" y="32.385" size="1.778" layer="27" display="off"/>
 <attribute name="MPN" value="142-0711-821" x="0" y="32.385" size="1.778" layer="27" display="off"/>
 <attribute name="MF" value="JOHNSON COMPONENTS" x="0" y="32.385" size="1.778" layer="27" display="off"/>
 <attribute name="OC_FARNELL" value="1019328" x="0" y="32.385" size="1.778" layer="27" display="off"/>
 </element>
 </elements>
 <signals>
 <signal name="GND">
@@ @@ -1257,16 +1255,6 @@ Please make sure your boards conform to @@
 <contactref element="U7" pad="2"/>
 <contactref element="U7" pad="5"/>
 <contactref element="U$7" pad="V-"/>
 <contactref element="X5" pad="2"/>
 <contactref element="X5" pad="4"/>
 <contactref element="X5" pad="3"/>
 <contactref element="X5" pad="5"/>
 <contactref element="X5" pad="2"/>
 <contactref element="X2" pad="2"/>
 <contactref element="X2" pad="4"/>
 <contactref element="X2" pad="3"/>
 <contactref element="X2" pad="5"/>
 <contactref element="X2" pad="2"/>
 <contactref element="AUX0" pad="C"/>
 <wire x1="40.25" y1="38.735" x2="43.815" y2="38.735" width="0.8128" layer="1"/>
 <wire x1="43.815" y1="38.735" x2="44.45" y2="38.1" width="0.8128" layer="1"/>
@@ @@ -1276,20 +1264,17 @@ Please make sure your boards conform to @@
 <contactref element="AUX2" pad="C"/>
 <contactref element="AUX3" pad="C"/>
 <wire x1="2.59" y1="9.6" x2="2.55" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="10.795" y1="9.175" x2="11.745" y2="8.225" width="0.4064" layer="1"/>
 <wire x1="11.775" y1="8.255" x2="11.745" y2="8.225" width="0.4064" layer="1"/>
 <wire x1="36.83" y1="22.31" x2="36.83" y2="24.55" width="0.4064" layer="1"/>
 <wire x1="36.83" y1="24.55" x2="37.68" y2="25.4" width="0.4064" layer="1"/>
-<wire x1="39.79" y1="25.4" x2="37.68" y2="25.4" width="0.4064" layer="1"/>
+<wire x1="38.735" y1="25.4" x2="37.68" y2="25.4" width="0.4064" layer="1"/>
 <wire x1="38.95" y1="48.895" x2="38.95" y2="50.38" width="0.4064" layer="1"/>
 <wire x1="38.95" y1="50.38" x2="39.37" y2="50.8" width="0.4064" layer="1"/>
 <contactref element="SETGPS" pad="2"/>
 <contactref element="IC3" pad="3"/>
 <contactref element="IC3" pad="1"/>
 <contactref element="IC3" pad="3"/>
 <wire x1="3.175" y1="12.9" x2="3.175" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="3.175" y1="9.64" x2="2.55" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="3.175" y1="9.64" x2="10.795" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="2.55" y1="9.64" x2="10.795" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="10.795" y1="9.64" x2="10.795" y2="9.175" width="0.4064" layer="1"/>
 <wire x1="10.795" y1="10.815" x2="10.795" y2="9.64" width="0.4064" layer="1"/>
 <wire x1="31.03" y1="16.51" x2="28.0425" y2="16.51" width="0.4064" layer="1"/>
@@ @@ -1297,7 +1282,7 @@ Please make sure your boards conform to @@
 <wire x1="28.0425" y1="16.51" x2="27.94" y2="16.6125" width="0.4064" layer="1"/>
 <contactref element="R27" pad="2"/>
 <contactref element="Q9" pad="E"/>
 <polygon width="0.4064" layer="1">
+<polygon width="0.4064" layer="1" isolate="0.254">
 <vertex x="-2.54" y="57.15"/>
 <vertex x="20.32" y="57.15"/>
 <vertex x="20.32" y="5.08"/>
@@ @@ -1321,7 +1306,6 @@ Please make sure your boards conform to @@
 <via x="14.2875" y="6.35" extent="1-16" drill="0.254"/>
 <via x="12.7" y="9.2075" extent="1-16" drill="0.254"/>
 <wire x1="11.745" y1="8.225" x2="11.745" y2="7.935" width="0.4064" layer="1"/>
 <wire x1="11.745" y1="7.935" x2="12.7" y2="9.2075" width="0.4064" layer="1"/>
 <wire x1="14.39" y1="7.3025" x2="14.39" y2="6.4525" width="0.4064" layer="1"/>
 <wire x1="14.39" y1="6.4525" x2="14.2875" y2="6.35" width="0.4064" layer="1"/>
 <via x="9.525" y="1.905" extent="1-16" drill="0.254"/>
@@ @@ -1393,8 +1377,8 @@ Please make sure your boards conform to @@
 <via x="22.225" y="37.7825" extent="1-16" drill="0.254"/>
 <wire x1="31.43" y1="43.35" x2="33.3375" y2="43.35" width="0.4064" layer="1"/>
 <wire x1="33.3375" y1="43.35" x2="33.3375" y2="43.4975" width="0.4064" layer="1"/>
 <via x="38.735" y="26.3525" extent="1-16" drill="0.254"/>
 <wire x1="38.735" y1="26.3525" x2="38.735" y2="25.4" width="0.4064" layer="1"/>
 <via x="38.735" y="28.8925" extent="1-16" drill="0.254"/>
 <wire x1="38.735" y1="28.8925" x2="38.735" y2="25.4" width="0.4064" layer="1"/>
 <wire x1="38.735" y1="25.4" x2="39.79" y2="25.4" width="0.4064" layer="1"/>
 <via x="26.67" y="17.145" extent="1-16" drill="0.254"/>
 <wire x1="26.67" y1="17.145" x2="26.67" y2="16.51" width="0.4064" layer="1"/>
@@ @@ -1440,17 +1424,10 @@ Please make sure your boards conform to @@
 <via x="17.145" y="1.905" extent="1-16" drill="0.254"/>
 <wire x1="18.3" y1="1.27" x2="17.78" y2="1.27" width="0.4064" layer="1"/>
 <wire x1="17.78" y1="1.27" x2="17.145" y2="1.905" width="0.4064" layer="1"/>
 <via x="3.4925" y="29.845" extent="1-16" drill="0.254"/>
 <via x="3.4925" y="28.8925" extent="1-16" drill="0.254"/>
 <via x="3.4925" y="27.94" extent="1-16" drill="0.254"/>
 <via x="3.4925" y="26.9875" extent="1-16" drill="0.254"/>
 <via x="5.3975" y="29.845" extent="1-16" drill="0.254"/>
 <via x="8.5725" y="29.21" extent="1-16" drill="0.254"/>
 <via x="8.5725" y="28.2575" extent="1-16" drill="0.254"/>
 <via x="9.525" y="27.305" extent="1-16" drill="0.254"/>
 <via x="3.01625" y="26.67" extent="1-16" drill="0.254"/>
 <via x="9.04875" y="28.2575" extent="1-16" drill="0.254"/>
 <via x="9.525" y="26.3525" extent="1-16" drill="0.254"/>
 <via x="2.54" y="26.9875" extent="1-16" drill="0.254"/>
 <via x="1.5875" y="26.9875" extent="1-16" drill="0.254"/>
 <via x="2.06375" y="26.67" extent="1-16" drill="0.254"/>
 <via x="0.9525" y="26.035" extent="1-16" drill="0.254"/>
 <via x="0.9525" y="25.0825" extent="1-16" drill="0.254"/>
 <via x="0.9525" y="24.13" extent="1-16" drill="0.254"/>
@@ @@ -1482,6 +1459,25 @@ Please make sure your boards conform to @@
 <via x="18.7325" y="22.38375" extent="1-16" drill="0.254"/>
 <via x="18.7325" y="14.76375" extent="1-16" drill="0.254"/>
 <via x="18.7325" y="15.71625" extent="1-16" drill="0.254"/>
 <contactref element="X1" pad="G@1"/>
 <contactref element="X1" pad="G@2"/>
 <contactref element="X1" pad="G@3"/>
 <contactref element="X1" pad="G@4"/>
 <contactref element="X3" pad="G@1"/>
 <contactref element="X3" pad="G@2"/>
 <contactref element="X3" pad="G@3"/>
 <contactref element="X3" pad="G@4"/>
 <contactref element="X1" pad="G@1"/>
 <contactref element="X3" pad="G@1"/>
 <via x="4.92125" y="28.8925" extent="1-16" drill="0.254"/>
 <via x="4.92125" y="29.845" extent="1-16" drill="0.254"/>
 <via x="4.92125" y="30.7975" extent="1-16" drill="0.254"/>
 <via x="6.985" y="29.68625" extent="1-16" drill="0.254"/>
 <via x="6.985" y="30.63875" extent="1-16" drill="0.254"/>
 <via x="6.985" y="31.75" extent="1-16" drill="0.254"/>
 <via x="6.19125" y="32.86125" extent="1-16" drill="0.254"/>
 <via x="5.23875" y="33.49625" extent="1-16" drill="0.254"/>
 <via x="7.9375" y="29.68625" extent="1-16" drill="0.254"/>
 <wire x1="28.46" y1="24.13" x2="28.46" y2="26.67" width="0" layer="19" extent="1-1"/>
 <wire x1="26.575" y1="23.7875" x2="28.46" y2="24.13" width="0" layer="19" extent="1-16"/>
 <wire x1="24.65" y1="24.13" x2="26.575" y2="23.7875" width="0" layer="19" extent="1-16"/>
@@ @@ -1704,24 +1700,17 @@ Please make sure your boards conform to @@
 </signal>
 <signal name="RFOUT" class="2">
 <contactref element="M2" pad="RFOUT"/>
 <contactref element="X2" pad="1"/>
 <wire x1="16.51" y1="50.8" x2="16.51" y2="46.99" width="0.8128" layer="16"/>
 <wire x1="16.51" y1="46.99" x2="13.97" y2="44.45" width="0.8128" layer="16"/>
 <wire x1="13.97" y1="44.45" x2="4.445" y2="44.45" width="0.8128" layer="16"/>
 <contactref element="X1" pad="1"/>
 <wire x1="2.1154" y1="42.545" x2="9.2075" y2="42.545" width="0.8128" layer="1"/>
 <wire x1="9.2075" y1="42.545" x2="16.51" y2="49.8475" width="0.8128" layer="1"/>
 <wire x1="16.51" y1="49.8475" x2="16.51" y2="50.8" width="0.8128" layer="1"/>
 </signal>
 <signal name="HX1_EN">
 <contactref element="IC2" pad="2"/>
 <contactref element="R18" pad="1"/>
 <via x="44.7675" y="52.07" extent="1-16" drill="0.254"/>
 <wire x1="46.0375" y1="51.65" x2="44.7675" y2="52.07" width="0.4064" layer="1"/>
 <via x="47.3075" y="52.07" extent="1-16" drill="0.254"/>
 <via x="34.29" y="49.2125" extent="1-16" drill="0.254"/>
 <wire x1="34.29" y1="44.43" x2="34.29" y2="49.2125" width="0.4064" layer="1"/>
 <wire x1="44.7675" y1="52.07" x2="33.3375" y2="52.07" width="0.4064" layer="16"/>
 <wire x1="33.3375" y1="52.07" x2="33.02" y2="51.7525" width="0.4064" layer="16"/>
 <wire x1="33.02" y1="51.7525" x2="33.02" y2="49.8475" width="0.4064" layer="16"/>
 <wire x1="33.02" y1="49.8475" x2="33.3375" y2="49.53" width="0.4064" layer="16"/>
 <wire x1="33.3375" y1="49.53" x2="33.9725" y2="49.53" width="0.4064" layer="16"/>
 <wire x1="33.9725" y1="49.53" x2="34.29" y2="49.2125" width="0.4064" layer="16"/>
 <wire x1="34.29" y1="44.43" x2="34.29" y2="42.545" width="0.4064" layer="1"/>
 <via x="34.29" y="42.545" extent="1-16" drill="0.254"/>
 <wire x1="34.29" y1="42.545" x2="34.29" y2="40.9575" width="0.4064" layer="16"/>
@@ @@ -1731,6 +1720,13 @@ Please make sure your boards conform to @@
 <contactref element="IC1" pad="32"/>
 <wire x1="33.63" y1="22.31" x2="33.63" y2="30.505" width="0.4064" layer="1"/>
 <wire x1="33.63" y1="30.505" x2="32.7025" y2="31.4325" width="0.4064" layer="1"/>
 <wire x1="34.29" y1="49.2125" x2="35.2425" y2="49.2125" width="0.4064" layer="16"/>
 <wire x1="35.2425" y1="49.2125" x2="35.56" y2="49.53" width="0.4064" layer="16"/>
 <wire x1="35.56" y1="49.53" x2="35.56" y2="51.7525" width="0.4064" layer="16"/>
 <wire x1="35.56" y1="51.7525" x2="35.8775" y2="52.07" width="0.4064" layer="16"/>
 <wire x1="35.8775" y1="52.07" x2="47.3075" y2="52.07" width="0.4064" layer="16"/>
 <wire x1="46.0375" y1="51.65" x2="46.775" y2="51.65" width="0.4064" layer="1"/>
 <wire x1="46.775" y1="51.65" x2="47.3075" y2="52.07" width="0.4064" layer="1"/>
 </signal>
 <signal name="3.3V">
 <contactref element="C8" pad="1"/>
@@ @@ -1782,8 +1778,6 @@ Please make sure your boards conform to @@
 <contactref element="R6" pad="2"/>
 <contactref element="R5" pad="2"/>
 <wire x1="14.59" y1="8.89" x2="13.97" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="16.39" y1="10.16" x2="15.86" y2="10.16" width="0.4064" layer="1"/>
 <wire x1="15.86" y1="10.16" x2="14.59" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="9.845" y1="8.225" x2="9.845" y2="7.935" width="0.4064" layer="1"/>
 <wire x1="9.845" y1="7.935" x2="11.43" y2="6.35" width="0.4064" layer="1"/>
 <wire x1="11.43" y1="6.35" x2="12.7" y2="6.35" width="0.4064" layer="1"/>
@@ @@ -1887,6 +1881,9 @@ Please make sure your boards conform to @@
 <wire x1="48.045" y1="15.3425" x2="47.9425" y2="15.24" width="0.4064" layer="1"/>
 <wire x1="46.355" y1="15.3425" x2="47.84" y2="15.3425" width="0.4064" layer="1"/>
 <wire x1="47.84" y1="15.3425" x2="47.9425" y2="15.24" width="0.4064" layer="1"/>
 <wire x1="14.59" y1="8.89" x2="14.59" y2="9.1925" width="0.4064" layer="1"/>
 <wire x1="14.59" y1="9.1925" x2="15.5575" y2="10.16" width="0.4064" layer="1"/>
 <wire x1="15.5575" y1="10.16" x2="16.39" y2="10.16" width="0.4064" layer="1"/>
 </signal>
 <signal name="HX1_EN_5V">
 <contactref element="M2" pad="EN"/>
@@ @@ -1939,11 +1936,13 @@ Please make sure your boards conform to @@
 <vertex x="47.3075" y="42.8625"/>
 <vertex x="45.72" y="42.8625"/>
 </polygon>
 <wire x1="46.0375" y1="44.1325" x2="43.4975" y2="44.1325" width="0.8128" layer="16"/>
 <wire x1="43.4975" y1="44.1325" x2="36.83" y2="50.8" width="0.8128" layer="16"/>
 <wire x1="46.0375" y1="44.1325" x2="40.3225" y2="44.1325" width="0.8128" layer="16"/>
 <wire x1="40.3225" y1="44.1325" x2="36.83" y2="47.625" width="0.8128" layer="16"/>
 <wire x1="36.83" y1="47.625" x2="36.83" y2="48.26" width="0.8128" layer="16"/>
 <via x="22.5425" y="33.02" extent="1-16" drill="0.254"/>
 <via x="23.495" y="33.02" extent="1-16" drill="0.254"/>
 <via x="24.4475" y="33.02" extent="1-16" drill="0.254"/>
 <wire x1="36.83" y1="48.26" x2="36.83" y2="50.8" width="0.8128" layer="16"/>
 <wire x1="24.4475" y1="33.02" x2="44.45" y2="33.02" width="0.8128" layer="16"/>
 <wire x1="44.45" y1="33.02" x2="46.99" y2="35.56" width="0.8128" layer="16"/>
 <wire x1="46.99" y1="35.56" x2="46.99" y2="43.18" width="0.8128" layer="16"/>
@@ @@ -1957,8 +1956,7 @@ Please make sure your boards conform to @@
 <via x="33.3375" y="48.26" extent="1-16" drill="0.254"/>
 <wire x1="33.34" y1="47.02" x2="33.3375" y2="47.0225" width="0.4064" layer="1"/>
 <wire x1="33.3375" y1="47.0225" x2="33.3375" y2="48.26" width="0.4064" layer="1"/>
 <wire x1="33.3375" y1="48.26" x2="34.29" y2="48.26" width="0.4064" layer="16"/>
 <wire x1="34.29" y1="48.26" x2="36.83" y2="50.8" width="0.4064" layer="16"/>
 <wire x1="33.3375" y1="48.26" x2="36.83" y2="48.26" width="0.4064" layer="16"/>
 </signal>
 <signal name="HX1_TX_5V">
 <contactref element="M2" pad="TXD"/>
@@ @@ -2006,10 +2004,10 @@ Please make sure your boards conform to @@
 <signal name="BUZZ">
 <contactref element="IC1" pad="30"/>
 <contactref element="R22" pad="1"/>
-<via x="27.94" y="43.18" extent="1-16" drill="0.254"/>
+<via x="28.2575" y="42.8625" extent="1-16" drill="0.254"/>
 <wire x1="26.67" y1="43.6" x2="27.52" y2="43.6" width="0.4064" layer="1"/>
 <wire x1="27.52" y1="43.6" x2="27.94" y2="43.18" width="0.4064" layer="1"/>
 <wire x1="27.94" y1="43.18" x2="33.655" y2="37.465" width="0.4064" layer="16"/>
 <wire x1="27.52" y1="43.6" x2="28.2575" y2="42.8625" width="0.4064" layer="1"/>
 <wire x1="28.2575" y1="42.8625" x2="33.655" y2="37.465" width="0.4064" layer="16"/>
 <via x="33.655" y="37.465" extent="1-16" drill="0.254"/>
 <wire x1="33.655" y1="37.465" x2="33.655" y2="31.4325" width="0.4064" layer="1"/>
 <wire x1="33.655" y1="31.4325" x2="34.29" y2="30.7975" width="0.4064" layer="1"/>
@@ @@ -2087,12 +2085,6 @@ Please make sure your boards conform to @@
 <vertex x="23.495" y="41.5925"/>
 </polygon>
 <via x="25.0825" y="43.18" extent="1-16" drill="0.254"/>
 <wire x1="30.71" y1="48.875" x2="30.71" y2="50.57" width="0.8128" layer="16"/>
 <wire x1="30.71" y1="50.57" x2="29.21" y2="52.07" width="0.8128" layer="16"/>
 <wire x1="29.21" y1="52.07" x2="27.94" y2="52.07" width="0.8128" layer="16"/>
 <wire x1="27.94" y1="52.07" x2="26.67" y2="50.8" width="0.8128" layer="16"/>
 <wire x1="26.67" y1="50.8" x2="26.67" y2="44.7675" width="0.8128" layer="16"/>
 <wire x1="26.67" y1="44.7675" x2="25.0825" y2="43.18" width="0.8128" layer="16"/>
 <wire x1="25.4" y1="41.91" x2="33.3375" y2="41.91" width="0.8128" layer="1"/>
 <wire x1="33.3375" y1="41.91" x2="34.6075" y2="40.64" width="0.8128" layer="1"/>
 <wire x1="34.6075" y1="40.64" x2="34.6075" y2="36.83" width="0.8128" layer="1"/>
@@ @@ -2111,6 +2103,14 @@ Please make sure your boards conform to @@
 <wire x1="15.7075" y1="40.37" x2="15.5575" y2="40.22" width="0.8128" layer="1"/>
 <wire x1="23.8125" y1="41.91" x2="18.6875" y2="41.91" width="0.8128" layer="1"/>
 <wire x1="18.6875" y1="41.91" x2="17.1475" y2="40.37" width="0.8128" layer="1"/>
 <wire x1="30.71" y1="48.875" x2="30.71" y2="47.22" width="0.8128" layer="16"/>
 <wire x1="30.71" y1="47.22" x2="26.67" y2="43.18" width="0.8128" layer="16"/>
 <wire x1="26.67" y1="43.18" x2="25.0825" y2="43.18" width="0.8128" layer="16"/>
 <wire x1="25.0825" y1="43.18" x2="25.0825" y2="41.91" width="0.8128" layer="16"/>
 <wire x1="25.0825" y1="41.91" x2="23.8125" y2="41.91" width="0.8128" layer="16"/>
 <wire x1="25.0825" y1="43.18" x2="23.8125" y2="43.18" width="0.8128" layer="16"/>
 <wire x1="23.8125" y1="43.18" x2="23.8125" y2="41.91" width="0.8128" layer="16"/>
 <wire x1="23.8125" y1="41.91" x2="25.0825" y2="43.18" width="0.8128" layer="16"/>
 </signal>
 <signal name="N$4">
 <contactref element="5V_SWITCHING" pad="3"/>
@@ @@ -2149,23 +2149,27 @@ Please make sure your boards conform to @@
 <contactref element="U3" pad="8"/>
 <contactref element="R23" pad="1"/>
 <wire x1="6.475" y1="24.7" x2="6.475" y2="26.6925" width="0.4064" layer="1"/>
-<wire x1="6.475" y1="26.6925" x2="6.135" y2="26.9875" width="0.4064" layer="1"/>
+<wire x1="6.475" y1="26.6925" x2="6.4525" y2="26.67" width="0.4064" layer="1"/>
 <wire x1="6.475" y1="24.7" x2="7.575" y2="24.7" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$30">
 <contactref element="L5" pad="2"/>
 <contactref element="R23" pad="2"/>
 <wire x1="7.635" y1="28.575" x2="7.635" y2="27.1875" width="0.4064" layer="1"/>
 <wire x1="7.635" y1="27.1875" x2="7.835" y2="26.9875" width="0.4064" layer="1"/>
 <wire x1="8.11125" y1="28.2575" x2="8.11125" y2="27.02875" width="0.4064" layer="1"/>
 <wire x1="8.11125" y1="27.02875" x2="8.1525" y2="26.67" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$31">
 <contactref element="U3" pad="11"/>
 <contactref element="L5" pad="1"/>
 <contactref element="X5" pad="1"/>
 <wire x1="4.445" y1="33.655" x2="4.445" y2="28.575" width="0.4064" layer="1"/>
 <wire x1="4.445" y1="28.575" x2="4.445" y2="24.87" width="0.4064" layer="1"/>
 <wire x1="4.445" y1="24.87" x2="4.275" y2="24.7" width="0.4064" layer="1"/>
 <wire x1="6.335" y1="28.575" x2="4.445" y2="28.575" width="0.4064" layer="1"/>
 <contactref element="X3" pad="1"/>
 <wire x1="2.1154" y1="32.385" x2="5.08" y2="32.385" width="0.6096" layer="1"/>
 <wire x1="5.08" y1="32.385" x2="6.0325" y2="31.4325" width="0.6096" layer="1"/>
 <wire x1="6.0325" y1="31.4325" x2="6.0325" y2="28.2575" width="0.6096" layer="1"/>
 <wire x1="4.28625" y1="24.765" x2="4.28625" y2="26.51125" width="0.6096" layer="1"/>
 <wire x1="4.28625" y1="26.51125" x2="6.0325" y2="28.2575" width="0.6096" layer="1"/>
 <wire x1="6.0325" y1="28.2575" x2="6.81125" y2="28.2575" width="0.6096" layer="1"/>
 <wire x1="4.28625" y1="24.765" x2="4.275" y2="24.7" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="UBX_SCL">
 <contactref element="U3" pad="19"/>
@@ @@ -2185,10 +2189,6 @@ Please make sure your boards conform to @@
 <contactref element="U3" pad="22"/>
 <contactref element="R3" pad="1"/>
 <contactref element="D2" pad="1"/>
 <wire x1="14.09" y1="10.16" x2="14.9225" y2="10.16" width="0.4064" layer="1"/>
 <wire x1="14.9225" y1="10.16" x2="15.24" y2="10.4775" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="10.4775" x2="15.24" y2="12.635" width="0.4064" layer="1"/>
 <wire x1="15.24" y1="12.635" x2="14.975" y2="12.9" width="0.4064" layer="1"/>
 <via x="13.0175" y="10.16" extent="1-16" drill="0.2286"/>
 <wire x1="14.09" y1="10.16" x2="13.0175" y2="10.16" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="9.74" x2="18.9475" y2="9.74" width="0.4064" layer="1"/>
@@ @@ -2198,14 +2198,16 @@ Please make sure your boards conform to @@
 <via x="19.05" y="11.1125" extent="1-16" drill="0.254"/>
 <wire x1="19.05" y1="11.1125" x2="13.97" y2="11.1125" width="0.4064" layer="16"/>
 <wire x1="13.97" y1="11.1125" x2="13.0175" y2="10.16" width="0.4064" layer="16"/>
 <wire x1="14.975" y1="12.9" x2="14.975" y2="11.045" width="0.4064" layer="1"/>
 <wire x1="14.975" y1="11.045" x2="14.09" y2="10.16" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$32">
 <contactref element="U$7" pad="V+"/>
 <contactref element="R3" pad="2"/>
 <wire x1="2.55" y1="8.14" x2="2.55" y2="7.2925" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="8.04" x2="19.05" y2="7.62" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="7.62" x2="17.145" y2="5.715" width="0.4064" layer="1"/>
 <wire x1="17.145" y1="5.715" x2="4.445" y2="5.715" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="8.04" x2="19.05" y2="6.35" width="0.4064" layer="1"/>
 <wire x1="19.05" y1="6.35" x2="18.415" y2="5.715" width="0.4064" layer="1"/>
 <wire x1="18.415" y1="5.715" x2="4.445" y2="5.715" width="0.4064" layer="1"/>
 <wire x1="4.445" y1="5.715" x2="2.55" y2="7.2925" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$10">
@@ @@ -2272,11 +2274,11 @@ Please make sure your boards conform to @@
 <wire x1="8.89" y1="36.9325" x2="8.89" y2="32.385" width="0.4064" layer="1"/>
 <wire x1="8.89" y1="32.385" x2="9.525" y2="31.75" width="0.4064" layer="1"/>
 <via x="9.525" y="31.75" extent="1-16" drill="0.254"/>
 <wire x1="9.525" y1="31.75" x2="25.0825" y2="31.75" width="0.4064" layer="16"/>
 <wire x1="25.0825" y1="31.75" x2="26.3525" y2="30.48" width="0.4064" layer="16"/>
 <wire x1="26.3525" y1="30.48" x2="32.7025" y2="30.48" width="0.4064" layer="16"/>
 <wire x1="32.7025" y1="30.48" x2="34.29" y2="28.8925" width="0.4064" layer="16"/>
 <wire x1="34.29" y1="28.8925" x2="34.29" y2="23.8125" width="0.4064" layer="16"/>
 <wire x1="9.525" y1="31.75" x2="9.525" y2="28.8925" width="0.4064" layer="16"/>
 <wire x1="9.525" y1="28.8925" x2="10.16" y2="28.2575" width="0.4064" layer="16"/>
 <wire x1="10.16" y1="28.2575" x2="26.035" y2="28.2575" width="0.4064" layer="16"/>
 <wire x1="26.035" y1="28.2575" x2="30.48" y2="23.8125" width="0.4064" layer="16"/>
 <wire x1="30.48" y1="23.8125" x2="34.29" y2="23.8125" width="0.4064" layer="16"/>
 </signal>
 <signal name="N$36">
 <contactref element="Q9" pad="C"/>
@@ @@ -2293,10 +2295,12 @@ Please make sure your boards conform to @@
 <signal name="N$38">
 <contactref element="Q9" pad="B"/>
 <contactref element="10K" pad="1"/>
 <wire x1="13.9675" y1="40.47" x2="12.5275" y2="41.91" width="0.4064" layer="1"/>
 <wire x1="12.5275" y1="41.91" x2="11.43" y2="41.91" width="0.4064" layer="1"/>
 <wire x1="11.43" y1="41.91" x2="10.4775" y2="40.9575" width="0.4064" layer="1"/>
 <wire x1="10.4775" y1="40.9575" x2="10.4775" y2="40.22" width="0.4064" layer="1"/>
 <wire x1="10.4775" y1="40.22" x2="10.4775" y2="41.5925" width="0.4064" layer="1"/>
 <wire x1="10.4775" y1="41.5925" x2="10.795" y2="41.91" width="0.4064" layer="1"/>
 <wire x1="10.795" y1="41.91" x2="13.6525" y2="41.91" width="0.4064" layer="1"/>
 <wire x1="13.6525" y1="41.91" x2="13.97" y2="41.5925" width="0.4064" layer="1"/>
 <wire x1="13.97" y1="41.5925" x2="13.97" y2="40.4725" width="0.4064" layer="1"/>
 <wire x1="13.97" y1="40.4725" x2="13.9675" y2="40.47" width="0.4064" layer="1"/>
 </signal>
 <signal name="ASSOCLED">
 <contactref element="U$2" pad="15"/>
@@ @@ -2319,9 +2323,9 @@ Please make sure your boards conform to @@
 <contactref element="L1" pad="1"/>
 <wire x1="16.09" y1="7.3025" x2="15.89" y2="7.3025" width="0.4064" layer="1"/>
 <wire x1="15.89" y1="7.3025" x2="15.89" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="15.89" y1="8.89" x2="17.145" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="17.145" y1="8.89" x2="18.0975" y2="9.8425" width="0.4064" layer="1"/>
 <wire x1="18.0975" y1="9.8425" x2="18.0975" y2="10.795" width="0.4064" layer="1"/>
 <wire x1="15.89" y1="8.89" x2="17.78" y2="8.89" width="0.4064" layer="1"/>
 <wire x1="17.78" y1="8.89" x2="18.0975" y2="9.2075" width="0.4064" layer="1"/>
 <wire x1="18.0975" y1="9.2075" x2="18.0975" y2="10.795" width="0.4064" layer="1"/>
 <wire x1="16.075" y1="12.9" x2="16.075" y2="11.5475" width="0.4064" layer="1"/>
 <wire x1="16.075" y1="11.5475" x2="16.51" y2="11.1125" width="0.4064" layer="1"/>
 <wire x1="16.51" y1="11.1125" x2="17.78" y2="11.1125" width="0.4064" layer="1"/>

master/master.sch

➞

Show inline comments

@@ @@ -3186,44 +3186,311 @@ Source: http://www.atmel.com/dyn/resourc @@
 </library>
 <library name="con-coax">
 <packages>
 <package name="BU-SMA-H">
 <description>FEMALE &lt;b&gt;SMA CONNECTOR&lt;/b&gt;&lt;p&gt;
 Radiall&lt;p&gt;</description>
 <wire x1="-1.1" y1="3.2" x2="1.1" y2="3.2" width="0.2032" layer="21"/>
 <wire x1="3.2" y1="1.1" x2="3.2" y2="-1.1" width="0.2032" layer="21"/>
 <wire x1="1.1" y1="-3.2" x2="-1.1" y2="-3.2" width="0.2032" layer="21"/>
 <wire x1="-3.2" y1="-1.1" x2="-3.2" y2="1.1" width="0.2032" layer="21"/>
 <wire x1="-3.1999" y1="3.1999" x2="3.2" y2="3.2" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="3.2" x2="3.2" y2="2.9" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="2.9" x2="3.2" y2="-2.9" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="-2.9" x2="3.1999" y2="-3.1999" width="0.2032" layer="51"/>
 <wire x1="3.1999" y1="-3.1999" x2="-3.2" y2="-3.2" width="0.2032" layer="51"/>
 <wire x1="-3.2" y1="-3.2" x2="-3.1999" y2="3.1999" width="0.2032" layer="51"/>
 <wire x1="3.2" y1="2.9" x2="4.3" y2="2.9" width="0.2032" layer="51"/>
 <wire x1="4.3" y1="2.9" x2="8.3" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="2.9" x2="8.6" y2="3.4" width="0.2032" layer="21"/>
 <wire x1="10.7" y1="3.4" x2="11" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="11" y1="2.9" x2="11.6" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="11.6" y1="-2.9" x2="11.6" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.6" y1="3.4" x2="10.7" y2="3.4" width="0.2032" layer="21"/>
 <wire x1="3.2" y1="-2.9" x2="4.3" y2="-2.9" width="0.2032" layer="51"/>
 <wire x1="4.3" y1="-2.9" x2="8.3" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="-2.9" x2="8.6" y2="-3.4" width="0.2032" layer="21"/>
 <wire x1="10.7" y1="-3.4" x2="11" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="11" y1="-2.9" x2="11.6" y2="-2.9" width="0.2032" layer="21"/>
 <wire x1="8.6" y1="-3.4" x2="10.7" y2="-3.4" width="0.2032" layer="21"/>
 <wire x1="11" y1="-2.9" x2="11" y2="2.9" width="0.2032" layer="21"/>
 <wire x1="8.3" y1="-2.9" x2="8.3" y2="2.9" width="0.2032" layer="21"/>
 <package name="J502-ND">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; End Launch Jack Receptacle - Round Contact&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="-4.65" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-4.65" y1="-3.85" x2="-4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="-4.9" y1="-3.5" x2="-4.9" y2="-1.8" width="0" layer="46"/>
 <wire x1="-4.9" y1="-1.8" x2="-3.6" y2="-1.8" width="0" layer="46" curve="-180"/>
 <wire x1="-3.6" y1="-1.8" x2="-3.6" y2="-3.5" width="0" layer="46"/>
 <wire x1="-3.6" y1="-3.5" x2="-4.9" y2="-3.5" width="0" layer="46" curve="-180"/>
 <wire x1="3.6" y1="-3.5" x2="3.6" y2="-1.8" width="0" layer="46"/>
 <wire x1="3.6" y1="-1.8" x2="4.9" y2="-1.8" width="0" layer="46" curve="-180"/>
 <wire x1="4.9" y1="-1.8" x2="4.9" y2="-3.5" width="0" layer="46"/>
 <wire x1="4.9" y1="-3.5" x2="3.6" y2="-3.5" width="0" layer="46" curve="-180"/>
 <circle x="0" y="0" radius="3.1999" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.7" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="1.27"/>
 <pad name="2" x="-2.5499" y="2.5499" drill="1.778"/>
 <pad name="3" x="2.5499" y="2.5499" drill="1.778"/>
 <pad name="4" x="2.5499" y="-2.5499" drill="1.778"/>
 <pad name="5" x="-2.5499" y="-2.5499" drill="1.778"/>
 <pad name="1" x="0" y="0" drill="1"/>
 <pad name="2" x="-4.25" y="0.4" drill="1.5"/>
 <pad name="3" x="4.25" y="0.4" drill="1.5"/>
 <pad name="4" x="4.25" y="-2.65" drill="1.3" shape="long" rot="R90"/>
 <pad name="5" x="-4.25" y="-2.65" drill="1.3" shape="long" rot="R90"/>
 <text x="-2.54" y="4.445" size="1.27" layer="25">&gt;NAME</text>
 <text x="-3.175" y="-5.715" size="1.27" layer="27">&gt;VALUE</text>
 </package>
 <package name="J502-ND-142-0701-801/806">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0701-851/861">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0701-871/876">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0701-881/886">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.031&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="1.143" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0711-821/826">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.062&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.1" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-4.65" x2="4.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="3.85" x2="4.1" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.1" y1="3.85" x2="4.1" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <smd name="1" x="2.1154" y="0" dx="4.191" dy="1.778" layer="1"/>
 <smd name="G@1" x="2.1154" y="3.4946" dx="4.191" dy="2.667" layer="1"/>
 <smd name="G@2" x="2.1154" y="-3.4946" dx="4.191" dy="2.667" layer="1"/>
 <smd name="G@4" x="2.1154" y="-3.4946" dx="4.191" dy="2.667" layer="16"/>
 <smd name="G@3" x="2.1154" y="3.4946" dx="4.191" dy="2.667" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0711-871/876">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.047&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="1.905" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="J502-ND-142-0711-881/886">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; Board Thickness &lt;b&gt;0.047&lt;/b&gt; Inch, End Launch Jack Receptacle&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <wire x1="0" y1="5.588" x2="0" y2="-5.588" width="0" layer="20"/>
 <wire x1="-1.55" y1="-4.65" x2="-1.55" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="-2" x2="-3.7" y2="-2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="-2" x2="-4.45" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="-2.75" x2="-8.25" y2="-2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-2.75" x2="-8.25" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="-1.9" x2="-9.425" y2="-1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="-1.9" x2="-9.425" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-9.425" y1="1.9" x2="-8.25" y2="1.9" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="1.9" x2="-8.25" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-8.25" y1="2.75" x2="-4.45" y2="2.75" width="0.2032" layer="21"/>
 <wire x1="-4.45" y1="2.75" x2="-3.7" y2="2" width="0.2032" layer="21"/>
 <wire x1="-3.7" y1="2" x2="-1.55" y2="2" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="2" x2="-1.55" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-3.85" x2="-0.1" y2="3.85" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="-0.1" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="-0.1" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="21"/>
 <wire x1="-1.55" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-1.55" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="4.65" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-3.85" x2="-0.1" y2="-3.85" width="0.2032" layer="51"/>
 <wire x1="-0.1" y1="3.85" x2="4.65" y2="3.85" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="3.85" x2="4.65" y2="4.65" width="0.2032" layer="51"/>
 <smd name="1" x="2.5654" y="0" dx="5.08" dy="1.905" layer="1"/>
 <smd name="G@1" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@2" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="1"/>
 <smd name="G@4" x="2.5654" y="-4.4196" dx="5.08" dy="2.286" layer="16"/>
 <smd name="G@3" x="2.5654" y="4.4196" dx="5.08" dy="2.286" layer="16"/>
 <text x="0.635" y="6.35" size="1.778" layer="25">&gt;NAME</text>
 <text x="1.27" y="-8.89" size="1.778" layer="27">&gt;VALUE</text>
 <rectangle x1="-0.025" y1="-0.5" x2="4.05" y2="0.5" layer="51"/>
 </package>
 <package name="SMA-142-0701-871">
 <description>&lt;b&gt;SMA Connector&lt;/b&gt; HF-Steckverbinder PC END BLKHD JCK GLD .062" BOARDS&lt;p&gt;
 Hersteller: Emerson / Johnson&lt;br&gt;
 Source: &lt;a href="http://emersonconnectivity.com/OA_MEDIA/drawings/dr-1420701871.pdf"&gt; Data sheet&lt;a&gt;</description>
 <wire x1="-4.65" y1="4.65" x2="4.65" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="4.65" y1="4.65" x2="4.65" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="4.65" y1="-4.65" x2="-4.65" y2="-4.65" width="0.2032" layer="51"/>
 <wire x1="-4.65" y1="-4.65" x2="-4.65" y2="4.65" width="0.2032" layer="51"/>
 <wire x1="-4.65" y1="1.7" x2="-4.65" y2="4.65" width="0.2032" layer="21"/>
 <wire x1="4.65" y1="4.65" x2="4.65" y2="1.7" width="0.2032" layer="21"/>
 <wire x1="2.745" y1="-4.65" x2="-2.745" y2="-4.65" width="0.2032" layer="21"/>
 <circle x="0" y="0" radius="3.2378" width="0.2032" layer="51"/>
 <circle x="0" y="0" radius="1.4199" width="0.2032" layer="21"/>
 <pad name="1" x="0" y="0" drill="0.762" diameter="1.524"/>
 <pad name="2@1" x="-4.2545" y="0" drill="1.524" diameter="2.54"/>
 <pad name="2@2" x="4.2545" y="0" drill="1.524" diameter="2.54"/>
 <pad name="2@3" x="-4.2545" y="-3.1496" drill="2.159" diameter="2.794"/>
 <pad name="2@4" x="4.2545" y="-3.1496" drill="2.159" diameter="2.794"/>
 <text x="-5.08" y="5.08" size="1.27" layer="25">&gt;NAME</text>
 <text x="-5.08" y="-6.35" size="1.27" layer="27">&gt;VALUE</text>
 <rectangle x1="-4.775" y1="-0.5" x2="-3.75" y2="0.5" layer="51"/>
 <rectangle x1="-4.775" y1="-3.2432" x2="-3.75" y2="-2.2432" layer="51"/>
 <rectangle x1="-4.775" y1="-4.0814" x2="-3.75" y2="-3.0814" layer="51"/>
 <rectangle x1="3.75" y1="-0.5" x2="4.775" y2="0.5" layer="51" rot="R180"/>
 <rectangle x1="3.75" y1="-3.2432" x2="4.775" y2="-2.2432" layer="51" rot="R180"/>
 <rectangle x1="3.75" y1="-4.0814" x2="4.775" y2="-3.0814" layer="51" rot="R180"/>
 </package>
 </packages>
 <symbols>
 <symbol name="BNC-FGND">
@@ @@ -3240,29 +3507,31 @@ Radiall<p></description> @@
 <pin name="1" x="2.54" y="0" visible="off" length="short" direction="pas" rot="R180"/>
 <pin name="GND" x="2.54" y="-2.54" visible="off" length="short" direction="pwr" rot="R180"/>
 </symbol>
 <symbol name="GND">
 <text x="-1.524" y="1.778" size="1.778" layer="95">&gt;NAME</text>
 <pin name="GND" x="-2.54" y="0" length="short" direction="pwr"/>
 <symbol name="3GND">
 <wire x1="0" y1="0" x2="0" y2="-5.08" width="0.1524" layer="94"/>
 <text x="0" y="-7.62" size="1.778" layer="95">&gt;NAME</text>
 <pin name="GND@1" x="2.54" y="0" visible="off" length="short" direction="pwr" rot="R180"/>
 <pin name="GND@2" x="2.54" y="-2.54" visible="off" length="short" direction="pwr" rot="R180"/>
 <pin name="GND@3" x="2.54" y="-5.08" visible="off" length="short" direction="pwr" rot="R180"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="BU-SMA-H" prefix="X">
 <description>FEMALE &lt;b&gt;SMA CONNECTOR&lt;/b&gt;&lt;p&gt;
 Radiall&lt;p&gt;</description>
 <deviceset name="SMA-" prefix="X">
 <description>&lt;b&gt;SMA 50 Ohm&lt;/b&gt; End Launch Jack Receptacle - Round Contact&lt;p&gt;
 Johnson Components&lt;br&gt;
 Source: www.johnsoncomponents.com .. J502-ND.pdf</description>
 <gates>
 <gate name="G$1" symbol="BNC-FGND" x="0" y="0"/>
 <gate name="G2" symbol="GND" x="22.86" y="2.54" addlevel="request"/>
 <gate name="G3" symbol="GND" x="22.86" y="0" addlevel="request"/>
 <gate name="G4" symbol="GND" x="22.86" y="-2.54" addlevel="request"/>
 <gate name="G1" symbol="BNC-FGND" x="0" y="0"/>
 <gate name="G" symbol="3GND" x="0" y="-5.08" addlevel="request"/>
 </gates>
 <devices>
-<device name="" package="BU-SMA-H">
+<device name="J502-ND" package="J502-ND">
 <connects>
 <connect gate="G$1" pin="1" pad="1"/>
 <connect gate="G$1" pin="GND" pad="2"/>
 <connect gate="G2" pin="GND" pad="4"/>
 <connect gate="G3" pin="GND" pad="3"/>
 <connect gate="G4" pin="GND" pad="5"/>
 <connect gate="G" pin="GND@1" pad="3"/>
 <connect gate="G" pin="GND@2" pad="4"/>
 <connect gate="G" pin="GND@3" pad="5"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="2"/>
 </connects>
 <technologies>
 <technology name="">
@@ @@ -3273,6 +3542,142 @@ Radiall<p></description> @@
 </technology>
 </technologies>
 </device>
 <device name="142-0701-801/806" package="J502-ND-142-0701-801/806">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-801" constant="no"/>
 <attribute name="OC_FARNELL" value="1608592" constant="no"/>
 <attribute name="OC_NEWARK" value="90F2624" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0701-851/861" package="J502-ND-142-0701-851/861">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-851" constant="no"/>
 <attribute name="OC_FARNELL" value="1019325" constant="no"/>
 <attribute name="OC_NEWARK" value="99F6798" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0701-871/876" package="J502-ND-142-0701-871/876">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-871" constant="no"/>
 <attribute name="OC_FARNELL" value="1339835" constant="no"/>
 <attribute name="OC_NEWARK" value="91B6105" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0701-881/886" package="J502-ND-142-0701-881/886">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-881" constant="no"/>
 <attribute name="OC_FARNELL" value="1608603" constant="no"/>
 <attribute name="OC_NEWARK" value="08B906" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0711-821/826" package="J502-ND-142-0711-821/826">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0711-821" constant="no"/>
 <attribute name="OC_FARNELL" value="1019328" constant="no"/>
 <attribute name="OC_NEWARK" value="16F3627" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0711-871/876" package="J502-ND-142-0711-871/876">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0711-871" constant="no"/>
 <attribute name="OC_FARNELL" value="unknown" constant="no"/>
 <attribute name="OC_NEWARK" value="01C1639" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0711-881/886" package="J502-ND-142-0711-881/886">
 <connects>
 <connect gate="G" pin="GND@1" pad="G@2"/>
 <connect gate="G" pin="GND@2" pad="G@3"/>
 <connect gate="G" pin="GND@3" pad="G@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="G@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0711-881" constant="no"/>
 <attribute name="OC_FARNELL" value="unknown" constant="no"/>
 <attribute name="OC_NEWARK" value="50B4464" constant="no"/>
 </technology>
 </technologies>
 </device>
 <device name="142-0701-871/880" package="SMA-142-0701-871">
 <connects>
 <connect gate="G" pin="GND@1" pad="2@2"/>
 <connect gate="G" pin="GND@2" pad="2@3"/>
 <connect gate="G" pin="GND@3" pad="2@4"/>
 <connect gate="G1" pin="1" pad="1"/>
 <connect gate="G1" pin="GND" pad="2@1"/>
 </connects>
 <technologies>
 <technology name="">
 <attribute name="MF" value="JOHNSON COMPONENTS" constant="no"/>
 <attribute name="MPN" value="142-0701-871" constant="no"/>
 <attribute name="OC_FARNELL" value="1339835" constant="no"/>
 <attribute name="OC_NEWARK" value="91B6105" constant="no"/>
 </technology>
 </technologies>
 </device>
 </devices>
 </deviceset>
 </devicesets>
@@ @@ -5397,12 +5802,12 @@ There are 2 variants that must be carefu @@
 <variantdefs>
 </variantdefs>
 <classes>
-<class number="0" name="default" width="0.2032" drill="0.3048">
 <class number="0" name="default" width="0.2032" drill="0">
 <clearance class="0" value="0.2032"/>
 </class>
 <class number="1" name="power" width="0.508" drill="0">
 </class>
-<class number="2" name="20" width="0.508" drill="0">
+<class number="2" name="whatisthis" width="0.508" drill="0">
 </class>
 </classes>
 <parts>
@@ @@ -5501,13 +5906,6 @@ There are 2 variants that must be carefu @@
 <part name="P+12" library="SparkFun" deviceset="3.3V" device=""/>
 <part name="D2" library="SparkFun" deviceset="DIODE" device="SOD" value="SCHOTTKEY"/>
 <part name="R3" library="SparkFun" deviceset="RESISTOR" device="0603-RES" value="220R"/>
 <part name="X5" library="con-coax" deviceset="BU-SMA-H" device=""/>
 <part name="X2" library="con-coax" deviceset="BU-SMA-H" device="">
 <attribute name="MF" value=""/>
 <attribute name="MPN" value=""/>
 <attribute name="OC_FARNELL" value="unknown"/>
 <attribute name="OC_NEWARK" value="unknown"/>
 </part>
 <part name="U$11" library="SparkFun" deviceset="5V" device=""/>
 <part name="AUX0" library="adafruit" deviceset="LED" device="CHIPLED_0603" value="ORANGE"/>
 <part name="GND32" library="supply1" deviceset="GND" device=""/>
@@ @@ -5548,6 +5946,8 @@ There are 2 variants that must be carefu @@
 <part name="GND43" library="supply1" deviceset="GND" device=""/>
 <part name="GND42" library="supply1" deviceset="GND" device=""/>
 <part name="R12" library="SparkFun" deviceset="RESISTOR-ARRAY" device="0603-ARV" value="4.7k"/>
 <part name="X1" library="con-coax" deviceset="SMA-" device="142-0711-821/826"/>
 <part name="X3" library="con-coax" deviceset="SMA-" device="142-0711-821/826"/>
 </parts>
 <sheets>
 <sheet>
@@ @@ -5769,8 +6169,6 @@ Maybe use bigger R's</text> @@
 <attribute name="VALUE" x="93.98" y="233.9086" size="1.778" layer="96"/>
 </instance>
 <instance part="R3" gate="G$1" x="111.76" y="220.98" rot="R270"/>
 <instance part="X5" gate="G$1" x="20.32" y="139.7"/>
 <instance part="X2" gate="G$1" x="142.24" y="236.22"/>
 <instance part="U$11" gate="G$1" x="132.08" y="96.52"/>
 <instance part="AUX0" gate="G$1" x="254" y="223.52" smashed="yes">
 <attribute name="NAME" x="252.476" y="224.028" size="1.778" layer="95" rot="R90"/>
@@ @@ -5839,6 +6237,8 @@ Maybe use bigger R's</text> @@
 <instance part="R12" gate="B" x="50.8" y="104.14"/>
 <instance part="R12" gate="C" x="71.12" y="99.06"/>
 <instance part="R12" gate="D" x="60.96" y="101.6"/>
 <instance part="X1" gate="G1" x="142.24" y="236.22"/>
 <instance part="X3" gate="G1" x="20.32" y="139.7"/>
 </instances>
 <busses>
 </busses>
@@ @@ -5882,7 +6282,7 @@ Maybe use bigger R's</text> @@
 <pinref part="M2" gate="G$1" pin="RFGND2"/>
 <pinref part="M2" gate="G$1" pin="RFGND1"/>
 <pinref part="GND19" gate="1" pin="GND"/>
-<pinref part="X2" gate="G$1" pin="GND"/>
+<pinref part="X1" gate="G1" pin="GND"/>
 </segment>
 <segment>
 <wire x1="190.5" y1="228.6" x2="193.04" y2="228.6" width="0.1524" layer="91"/>
@@ @@ -6054,7 +6454,7 @@ Maybe use bigger R's</text> @@
 <pinref part="U3" gate="G$1" pin="GND2"/>
 <junction x="58.42" y="137.16"/>
 <wire x1="22.86" y1="137.16" x2="58.42" y2="137.16" width="0.1524" layer="91"/>
-<pinref part="X5" gate="G$1" pin="GND"/>
+<pinref part="X3" gate="G1" pin="GND"/>
 </segment>
 <segment>
 <wire x1="96.52" y1="137.16" x2="91.44" y2="137.16" width="0.1524" layer="91"/>
@@ @@ -6416,7 +6816,7 @@ Maybe use bigger R's</text> @@
 <segment>
 <wire x1="165.1" y1="236.22" x2="144.78" y2="236.22" width="0.1524" layer="91"/>
 <pinref part="M2" gate="G$1" pin="RFOUT"/>
-<pinref part="X2" gate="G$1" pin="1"/>
+<pinref part="X1" gate="G1" pin="1"/>
 </segment>
 </net>
 <net name="HX1_EN" class="0">
@@ @@ -6865,7 +7265,7 @@ Maybe use bigger R's</text> @@
 <wire x1="25.4" y1="144.78" x2="27.94" y2="144.78" width="0.1524" layer="91"/>
 <wire x1="22.86" y1="139.7" x2="25.4" y2="139.7" width="0.1524" layer="91"/>
 <junction x="25.4" y="139.7"/>
-<pinref part="X5" gate="G$1" pin="1"/>
+<pinref part="X3" gate="G1" pin="1"/>
 </segment>
 </net>
 <net name="UBX_SCL" class="0">

0 comments (0 inline, 0 general)