seniordesign-hardware Changeset - eccb0e3e2b11

Changeset - eccb0e3e2b11

Parent rev.

Child rev.

[Not reviewed]

default

0 2 0

ethanzonca@CL-ENS241-08.cedarville.edu - 12 years ago 2013-02-19 15:46:38
ethanzonca@CL-ENS241-08.cedarville.edu

Slave motherboard review and fixes

2 files changed with 71 insertions and 87 deletions:

slave/slave.brd

slave/slave.sch

0 comments (0 inline, 0 general)

slave/slave.brd

➞

Show inline comments

 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="6.4">
+<eagle version="6.3">
 <drawing>
 <settings>
 <setting alwaysvectorfont="yes"/>
 <setting verticaltext="up"/>
 </settings>
-<grid distance="4" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="0.25" altunitdist="mil" altunit="mil"/>
+<grid distance="15" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="3.125" altunitdist="mil" altunit="mil"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
@@ @@ -14,16 +14,16 @@ @@
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="no" active="yes"/>
 <layer number="22" name="bPlace" color="7" fill="1" visible="no" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="27" name="tValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="28" name="bValues" color="7" fill="1" visible="no" active="yes"/>
 <layer number="29" name="tStop" color="7" fill="3" visible="yes" active="yes"/>
 <layer number="30" name="bStop" color="7" fill="6" visible="yes" active="yes"/>
 <layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
 <layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
 <layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
 <layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
 <layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
@@ @@ -18234,12 +18234,12 @@ Please make sure your boards conform to @@
 <attribute name="NAME" x="15.367" y="19.304" size="0.4064" layer="25" font="vector" rot="R180"/>
 <attribute name="VALUE" x="15.494" y="21.209" size="0.4064" layer="27" font="vector" rot="R180"/>
 </element>
 <element name="C17" library="SparkFun" package="0603-CAP" value=".1uF" x="37.084" y="22.098" smashed="yes">
 <attribute name="OC_NEWARK" value="unknown" x="37.084" y="22.098" size="1.778" layer="27" display="off"/>
 <attribute name="MF" value="" x="37.084" y="22.098" size="1.778" layer="27" display="off"/>
 <attribute name="MPN" value="" x="37.084" y="22.098" size="1.778" layer="27" display="off"/>
 <attribute name="NAME" x="36.195" y="22.86" size="0.4064" layer="25" font="vector"/>
 <attribute name="VALUE" x="36.068" y="20.955" size="0.4064" layer="27" font="vector"/>
 <element name="C17" library="SparkFun" package="0603-CAP" value=".1uF" x="29.464" y="9.144" smashed="yes">
 <attribute name="OC_NEWARK" value="unknown" x="29.464" y="9.144" size="1.778" layer="27" display="off"/>
 <attribute name="MF" value="" x="29.464" y="9.144" size="1.778" layer="27" display="off"/>
 <attribute name="MPN" value="" x="29.464" y="9.144" size="1.778" layer="27" display="off"/>
 <attribute name="NAME" x="28.575" y="9.906" size="0.4064" layer="25" font="vector"/>
 <attribute name="VALUE" x="28.448" y="8.001" size="0.4064" layer="27" font="vector"/>
 </element>
 <element name="C18" library="SparkFun" package="0603-CAP" value="10uF" x="37.084" y="24.1808" smashed="yes">
 <attribute name="OC_NEWARK" value="unknown" x="37.084" y="24.1808" size="1.778" layer="27" display="off"/>
@@ @@ -18473,8 +18473,6 @@ Please make sure your boards conform to @@
 <wire x1="21.844" y1="29.884" x2="21.844" y2="29.7688" width="0.4064" layer="1"/>
 <wire x1="14.224" y1="7.9384" x2="17.018" y2="7.9384" width="0.4064" layer="1"/>
 <wire x1="51.0032" y1="3.576" x2="51.054" y2="3.6268" width="0.6096" layer="1"/>
 <wire x1="37.934" y1="24.1808" x2="37.934" y2="22.098" width="0.4064" layer="1"/>
 <wire x1="37.934" y1="22.098" x2="37.934" y2="20.1168" width="0.4064" layer="1"/>
 <polygon width="0.4064" layer="16" isolate="0.254">
 <vertex x="-2.4384" y="42.2656"/>
 <vertex x="-2.4384" y="-2.4384"/>
@@ @@ -18490,8 +18488,6 @@ Please make sure your boards conform to @@
 <vertex x="-3.048" y="42.8752"/>
 </polygon>
 <via x="49.5808" y="29.5656" extent="1-16" drill="0.6"/>
 <wire x1="33.8328" y1="9.9568" x2="27.2288" y2="9.9568" width="0.4064" layer="1"/>
 <wire x1="27.2288" y1="9.9568" x2="26.1112" y2="11.0744" width="0.4064" layer="1"/>
 <wire x1="26.1112" y1="11.0744" x2="26.1112" y2="12.0688" width="0.4064" layer="1"/>
 <wire x1="26.1112" y1="12.0688" x2="26.073" y2="12.107" width="0.4064" layer="1"/>
 <wire x1="14.2548" y1="28.6512" x2="14.204" y2="28.702" width="0.4064" layer="1"/>
@@ @@ -18522,6 +18518,8 @@ Please make sure your boards conform to @@
 <contactref element="JP4" pad="3"/>
 <via x="1.1176" y="23.4696" extent="1-16" drill="0.254"/>
 <contactref element="JP5" pad="1"/>
 <wire x1="26.8478" y1="10.3378" x2="26.1112" y2="11.0744" width="0.4064" layer="1"/>
 <via x="53.3908" y="29.5656" extent="1-16" drill="0.6"/>
 </signal>
 <signal name="VCC">
 <contactref element="IC1" pad="38"/>
@@ @@ -18558,11 +18556,10 @@ Please make sure your boards conform to @@
 <wire x1="26.0096" y1="23.6436" x2="26.073" y2="23.707" width="0.4064" layer="1"/>
 <wire x1="11.684" y1="29.552" x2="11.684" y2="29.5656" width="0.4064" layer="1"/>
 <wire x1="25.1968" y1="12.1832" x2="25.273" y2="12.107" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="24.1808" x2="36.234" y2="22.098" width="0.4064" layer="1"/>
 <wire x1="17.272" y1="31.662" x2="21.766" y2="31.662" width="0.4064" layer="1"/>
 <wire x1="21.766" y1="31.662" x2="21.844" y2="31.584" width="0.4064" layer="1"/>
 <wire x1="53.026" y1="24.511" x2="52.1462" y2="24.511" width="0.4064" layer="1"/>
-<wire x1="52.1462" y1="24.511" x2="51.4096" y2="23.7744" width="0.4064" layer="1"/>
+<wire x1="52.1462" y1="24.511" x2="51.4096" y2="23.7744" width="0.6096" layer="1"/>
 <via x="51.4096" y="23.7744" extent="1-16" drill="0.254"/>
 <wire x1="15.328" y1="20.066" x2="15.328" y2="20.232" width="0.4064" layer="1"/>
 <wire x1="15.328" y1="20.232" x2="13.4112" y2="22.1488" width="0.4064" layer="1"/>
@@ @@ -18579,18 +18576,16 @@ Please make sure your boards conform to @@
 <wire x1="3.2512" y1="22.6568" x2="1.016" y2="24.892" width="0.4064" layer="1"/>
 <wire x1="1.016" y1="24.892" x2="1.016" y2="29.337" width="0.4064" layer="1"/>
 <wire x1="57.912" y1="16.002" x2="57.912" y2="9.537" width="0.8128" layer="16"/>
 <wire x1="57.912" y1="16.002" x2="56.8452" y2="16.002" width="0.4064" layer="16"/>
 <wire x1="56.8452" y1="16.002" x2="49.784" y2="23.0632" width="0.4064" layer="16"/>
 <wire x1="51.4096" y1="23.7744" x2="50.4952" y2="23.7744" width="0.4064" layer="16"/>
 <wire x1="50.4952" y1="23.7744" x2="49.784" y2="23.0632" width="0.4064" layer="16"/>
 <wire x1="57.912" y1="16.002" x2="56.8452" y2="16.002" width="0.6096" layer="16"/>
 <wire x1="56.8452" y1="16.002" x2="50.3301" y2="22.5171" width="0.6096" layer="16"/>
 <wire x1="50.3301" y1="22.5171" x2="48.1584" y2="24.6888" width="0.6096" layer="16"/>
 <wire x1="6.096" y1="19.812" x2="1.0668" y2="24.8412" width="0.6096" layer="16"/>
 <wire x1="36.234" y1="24.1808" x2="36.234" y2="24.3468" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="24.3468" x2="36.9824" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="37.934" y1="18.1356" x2="39.46045" y2="18.1356" width="0.4064" layer="1"/>
 <wire x1="39.46045" y1="18.1356" x2="39.9288" y2="18.60395" width="0.4064" layer="1"/>
 <wire x1="39.9288" y1="18.60395" x2="39.9288" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="24.3468" x2="37.061775" y2="25.174575" width="0.6096" layer="1"/>
 <wire x1="37.934" y1="18.1356" x2="39.46045" y2="18.1356" width="0.6096" layer="1"/>
 <wire x1="39.46045" y1="18.1356" x2="39.9288" y2="18.60395" width="0.6096" layer="1"/>
 <wire x1="39.9288" y1="18.60395" x2="39.9288" y2="25.174575" width="0.6096" layer="1"/>
 <contactref element="C3" pad="1"/>
 <wire x1="48.1584" y1="24.6888" x2="49.784" y2="23.0632" width="0.4064" layer="16"/>
 <wire x1="60.888" y1="14.66" x2="60.3504" y2="14.66" width="0.8128" layer="1"/>
 <wire x1="60.3504" y1="14.66" x2="60.3504" y2="9.2456" width="0.8128" layer="1"/>
 <wire x1="60.3504" y1="9.2456" x2="60.1248" y2="9.2456" width="0.8128" layer="1"/>
@@ @@ -18602,22 +18597,21 @@ Please make sure your boards conform to @@
 <wire x1="55.5752" y1="4.064" x2="55.5752" y2="7.185" width="0.6096" layer="16"/>
 <wire x1="55.5752" y1="7.185" x2="55.5752" y2="7.2136" width="0.6096" layer="16"/>
 <wire x1="55.56" y1="7.185" x2="55.5752" y2="7.185" width="0.6096" layer="16"/>
 <wire x1="21.9456" y1="17.78" x2="26.0096" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="18.6944" x2="21.0312" y2="18.6944" width="0.4064" layer="1"/>
 <wire x1="21.0312" y1="18.6944" x2="21.9456" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="22.3266" y1="17.78" x2="26.0096" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="18.6944" x2="21.4122" y2="18.6944" width="0.4064" layer="1"/>
 <wire x1="21.4122" y1="18.6944" x2="22.3266" y2="17.78" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="18.6944" x2="19.473" y2="18.707" width="0.4064" layer="1"/>
 <wire x1="36.9824" y1="25.0952" x2="39.9288" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="39.9288" y1="25.0952" x2="43.2816" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="43.2816" y1="25.0952" x2="43.688" y2="24.6888" width="0.4064" layer="1"/>
 <wire x1="37.061775" y1="25.174575" x2="39.9288" y2="25.174575" width="0.6096" layer="1"/>
 <wire x1="39.9288" y1="25.174575" x2="43.202225" y2="25.174575" width="0.6096" layer="1"/>
 <wire x1="43.202225" y1="25.174575" x2="43.688" y2="24.6888" width="0.6096" layer="1"/>
 <via x="43.688" y="24.6888" extent="1-16" drill="0.254"/>
 <wire x1="43.688" y1="24.6888" x2="48.1584" y2="24.6888" width="0.4064" layer="16"/>
 <wire x1="6.096" y1="19.812" x2="6.096" y2="6.9088" width="0.6096" layer="16"/>
 <wire x1="43.688" y1="24.6888" x2="48.1584" y2="24.6888" width="0.6096" layer="16"/>
 <wire x1="6.096" y1="19.812" x2="6.096" y2="7.1247" width="0.6096" layer="16"/>
 <contactref element="JP4" pad="4"/>
 <contactref element="JP5" pad="3"/>
 <wire x1="52.324" y1="0.8128" x2="29.21" y2="0.8128" width="0.6096" layer="16"/>
 <wire x1="29.21" y1="0.8128" x2="20.955" y2="0.8128" width="0.6096" layer="16"/>
 <wire x1="20.955" y1="0.8128" x2="11.2395" y2="0.8128" width="0.6096" layer="16"/>
 <wire x1="11.2395" y1="0.8128" x2="6.096" y2="6.9088" width="0.6096" layer="16"/>
 <wire x1="20.955" y1="0.8128" x2="12.4079" y2="0.8128" width="0.6096" layer="16"/>
 <wire x1="13.628" y1="22.1488" x2="13.4112" y2="22.1488" width="0.4064" layer="1"/>
 <wire x1="60.1472" y1="8.0264" x2="60.1472" y2="9.4264" width="0.4064" layer="1"/>
 <wire x1="60.1472" y1="9.4264" x2="60.1248" y2="9.4488" width="0.4064" layer="1"/>
@@ @@ -18633,10 +18627,16 @@ Please make sure your boards conform to @@
 <wire x1="4.699" y1="33.02" x2="2.794" y2="31.115" width="0.4064" layer="1"/>
 <wire x1="1.0668" y1="24.8412" x2="1.0668" y2="29.3878" width="0.6096" layer="16"/>
 <wire x1="1.0668" y1="29.3878" x2="2.794" y2="31.115" width="0.6096" layer="16"/>
-<wire x1="21.082" y1="2.54" x2="21.082" y2="0.9398" width="0.4064" layer="16"/>
+<wire x1="21.082" y1="2.54" x2="21.082" y2="0.9398" width="0.6096" layer="16"/>
 <wire x1="21.082" y1="0.9398" x2="20.955" y2="0.8128" width="0.4064" layer="16"/>
 <wire x1="29.4" y1="2.54" x2="29.4" y2="1.0028" width="0.6096" layer="16"/>
 <wire x1="29.4" y1="1.0028" x2="29.21" y2="0.8128" width="0.6096" layer="16"/>
 <wire x1="12.4079" y1="0.8128" x2="6.096" y2="7.1247" width="0.6096" layer="16"/>
 <wire x1="51.4096" y1="23.7744" x2="50.3301" y2="22.6949" width="0.6096" layer="16"/>
 <wire x1="50.3301" y1="22.6949" x2="50.3301" y2="22.5171" width="0.6096" layer="16"/>
 <wire x1="25.273" y1="12.107" x2="25.273" y2="10.922" width="0.4064" layer="1"/>
 <wire x1="25.273" y1="10.922" x2="27.051" y2="9.144" width="0.4064" layer="1"/>
 <wire x1="27.051" y1="9.144" x2="28.614" y2="9.144" width="0.4064" layer="1"/>
 </signal>
 <signal name="RESET">
 <contactref element="R1" pad="2"/>
@@ @@ -18895,9 +18895,9 @@ Please make sure your boards conform to @@
 <wire x1="15.3416" y1="24.2824" x2="5.2832" y2="24.2824" width="0.4064" layer="1"/>
 <via x="5.2832" y="24.2824" extent="1-16" drill="0.254"/>
 <wire x1="5.2832" y1="24.2824" x2="5.2832" y2="28.5242" width="0.4064" layer="16"/>
 <wire x1="19.473" y1="20.307" x2="20.333" y2="20.307" width="0.4064" layer="1"/>
 <wire x1="20.333" y1="20.307" x2="21.844" y2="18.796" width="0.4064" layer="1"/>
 <wire x1="21.844" y1="18.796" x2="24.7904" y2="18.796" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="20.307" x2="20.714" y2="20.307" width="0.4064" layer="1"/>
 <wire x1="20.714" y1="20.307" x2="22.225" y2="18.796" width="0.4064" layer="1"/>
 <wire x1="22.225" y1="18.796" x2="24.7904" y2="18.796" width="0.4064" layer="1"/>
 <via x="24.7904" y="18.796" extent="1-16" drill="0.254"/>
 <wire x1="24.7904" y1="18.796" x2="24.7904" y2="8.89" width="0.4064" layer="16"/>
 <contactref element="JP5" pad="6"/>
@@ @@ -18915,18 +18915,18 @@ Please make sure your boards conform to @@
 <wire x1="17.0688" y1="22.352" x2="17.0688" y2="23.5712" width="0.4064" layer="1"/>
 <wire x1="17.0688" y1="23.5712" x2="15.5448" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="15.5448" y1="25.0952" x2="4.9784" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="2.8448" y1="27.2288" x2="2.794" y2="28.575" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="21.107" x2="20.4474" y2="21.107" width="0.4064" layer="1"/>
 <wire x1="20.4474" y1="21.107" x2="21.7424" y2="19.812" width="0.4064" layer="1"/>
 <wire x1="21.7424" y1="19.812" x2="23.6728" y2="19.812" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="21.107" x2="20.8284" y2="21.107" width="0.4064" layer="1"/>
 <wire x1="20.8284" y1="21.107" x2="22.1234" y2="19.812" width="0.4064" layer="1"/>
 <wire x1="22.1234" y1="19.812" x2="23.6728" y2="19.812" width="0.4064" layer="1"/>
 <via x="23.6728" y="19.812" extent="1-16" drill="0.254"/>
 <wire x1="23.6728" y1="19.812" x2="23.6728" y2="8.89" width="0.4064" layer="16"/>
 <contactref element="JP5" pad="5"/>
-<wire x1="4.9784" y1="25.0952" x2="2.8448" y2="27.2288" width="0.4064" layer="1"/>
+<wire x1="4.9784" y1="25.0952" x2="2.794" y2="27.2796" width="0.4064" layer="1"/>
 <wire x1="23.6728" y1="8.89" x2="26.8732" y2="5.6896" width="0.4064" layer="16"/>
 <wire x1="26.8732" y1="5.6896" x2="30.3784" y2="5.6896" width="0.4064" layer="16"/>
 <wire x1="30.3784" y1="5.6896" x2="33.4" y2="2.668" width="0.4064" layer="16"/>
 <wire x1="33.4" y1="2.668" x2="33.4" y2="2.54" width="0.4064" layer="16"/>
 <wire x1="2.794" y1="27.2796" x2="2.794" y2="28.575" width="0.4064" layer="1"/>
 </signal>
 <signal name="MOSI">
 <contactref element="IC1" pad="1"/>
@@ @@ -18938,9 +18938,9 @@ Please make sure your boards conform to @@
 <wire x1="15.8496" y1="25.8064" x2="7.2136" y2="25.8064" width="0.4064" layer="1"/>
 <wire x1="7.2136" y1="25.8064" x2="6.604" y2="26.416" width="0.4064" layer="1"/>
 <wire x1="6.604" y1="26.416" x2="6.604" y2="29.845" width="0.3048" layer="1"/>
 <wire x1="19.473" y1="21.907" x2="20.5618" y2="21.907" width="0.4064" layer="1"/>
 <wire x1="20.5618" y1="21.907" x2="21.6408" y2="20.828" width="0.4064" layer="1"/>
 <wire x1="21.6408" y1="20.828" x2="22.5552" y2="20.828" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="21.907" x2="20.9428" y2="21.907" width="0.4064" layer="1"/>
 <wire x1="20.9428" y1="21.907" x2="22.0218" y2="20.828" width="0.4064" layer="1"/>
 <wire x1="22.0218" y1="20.828" x2="22.5552" y2="20.828" width="0.4064" layer="1"/>
 <via x="22.5552" y="20.828" extent="1-16" drill="0.254"/>
 <wire x1="22.5552" y1="20.828" x2="22.5552" y2="8.89" width="0.4064" layer="16"/>
 <contactref element="JP5" pad="4"/>
@@ @@ -19041,34 +19041,34 @@ Please make sure your boards conform to @@
 </signal>
 <signal name="PD7">
 <contactref element="IC1" pad="16"/>
 <wire x1="24.473" y1="12.107" x2="24.473" y2="10.8838" width="0.4064" layer="1"/>
 <wire x1="24.473" y1="10.8838" x2="29.0703" y2="6.2865" width="0.4064" layer="1"/>
 <wire x1="24.473" y1="12.107" x2="24.473" y2="10.5028" width="0.4064" layer="1"/>
 <wire x1="24.473" y1="10.5028" x2="28.6893" y2="6.2865" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="10"/>
-<wire x1="29.0703" y1="6.2865" x2="39.6535" y2="6.2865" width="0.4064" layer="1"/>
+<wire x1="28.6893" y1="6.2865" x2="39.6535" y2="6.2865" width="0.4064" layer="1"/>
 <wire x1="39.6535" y1="6.2865" x2="43.4" y2="2.54" width="0.4064" layer="1"/>
 </signal>
 <signal name="PD6">
 <contactref element="IC1" pad="15"/>
 <wire x1="23.673" y1="12.107" x2="23.673" y2="10.4646" width="0.4064" layer="1"/>
 <wire x1="23.673" y1="10.4646" x2="28.6639" y2="5.4737" width="0.4064" layer="1"/>
 <wire x1="23.673" y1="12.107" x2="23.673" y2="10.0836" width="0.4064" layer="1"/>
 <wire x1="23.673" y1="10.0836" x2="28.2829" y2="5.4737" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="9"/>
-<wire x1="28.6639" y1="5.4737" x2="38.4663" y2="5.4737" width="0.4064" layer="1"/>
+<wire x1="28.2829" y1="5.4737" x2="38.4663" y2="5.4737" width="0.4064" layer="1"/>
 <wire x1="38.4663" y1="5.4737" x2="41.4" y2="2.54" width="0.4064" layer="1"/>
 </signal>
 <signal name="PD5">
 <contactref element="IC1" pad="14"/>
 <wire x1="22.873" y1="12.107" x2="22.873" y2="10.0454" width="0.4064" layer="1"/>
 <wire x1="22.873" y1="10.0454" x2="28.2575" y2="4.6609" width="0.4064" layer="1"/>
 <wire x1="22.873" y1="12.107" x2="22.873" y2="9.6644" width="0.4064" layer="1"/>
 <wire x1="22.873" y1="9.6644" x2="27.8765" y2="4.6609" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="8"/>
-<wire x1="28.2575" y1="4.6609" x2="37.2791" y2="4.6609" width="0.4064" layer="1"/>
+<wire x1="27.8765" y1="4.6609" x2="37.2791" y2="4.6609" width="0.4064" layer="1"/>
 <wire x1="37.2791" y1="4.6609" x2="39.4" y2="2.54" width="0.4064" layer="1"/>
 </signal>
 <signal name="PD4">
 <contactref element="IC1" pad="13"/>
 <wire x1="22.073" y1="12.107" x2="22.073" y2="9.6262" width="0.4064" layer="1"/>
 <wire x1="22.073" y1="9.6262" x2="27.8511" y2="3.8481" width="0.4064" layer="1"/>
 <wire x1="22.073" y1="12.107" x2="22.073" y2="9.2452" width="0.4064" layer="1"/>
 <wire x1="22.073" y1="9.2452" x2="27.4701" y2="3.8481" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="7"/>
-<wire x1="27.8511" y1="3.8481" x2="36.0919" y2="3.8481" width="0.4064" layer="1"/>
+<wire x1="27.4701" y1="3.8481" x2="36.0919" y2="3.8481" width="0.4064" layer="1"/>
 <wire x1="36.0919" y1="3.8481" x2="37.4" y2="2.54" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP1">
@@ @@ -19076,17 +19076,17 @@ Please make sure your boards conform to @@
 <wire x1="32.4104" y1="21.7424" x2="36.6776" y2="26.0096" width="0.4064" layer="16"/>
 <via x="36.6776" y="26.0096" extent="1-16" drill="0.254"/>
 <wire x1="44.1071" y1="33.4391" x2="54.0004" y2="33.4391" width="0.4064" layer="1"/>
-<wire x1="54.0004" y1="33.4391" x2="55.2577" y2="32.1818" width="0.4064" layer="1"/>
+<wire x1="54.0004" y1="33.4391" x2="55.14975" y2="32.28975" width="0.4064" layer="1"/>
 <contactref element="IC1" pad="22"/>
 <wire x1="55.14975" y1="32.28975" x2="55.2577" y2="32.1818" width="0.4064" layer="1"/>
 <wire x1="32.4104" y1="21.7424" x2="32.4104" y2="17.0688" width="0.4064" layer="16"/>
 <wire x1="32.4104" y1="17.0688" x2="29.2608" y2="13.9192" width="0.4064" layer="16"/>
 <via x="29.2608" y="13.9192" extent="1-16" drill="0.254"/>
 <wire x1="29.2608" y1="13.9192" x2="29.2608" y2="12.1192" width="0.4064" layer="1"/>
 <wire x1="29.2608" y1="12.1192" x2="29.273" y2="12.107" width="0.4064" layer="1"/>
 <wire x1="55.1434" y1="32.1183" x2="55.7657" y2="32.1818" width="0.6096" layer="1"/>
 <wire x1="55.7657" y1="32.1818" x2="55.88" y2="32.0675" width="0.6096" layer="1"/>
 <wire x1="55.2577" y1="32.1818" x2="55.1434" y2="32.1183" width="0.4064" layer="1"/>
 <wire x1="36.6776" y1="26.0096" x2="44.1071" y2="33.4391" width="0.4064" layer="1"/>
 <wire x1="55.1434" y1="32.1183" x2="55.14975" y2="32.12465" width="0.4064" layer="1"/>
 <wire x1="55.14975" y1="32.12465" x2="55.14975" y2="32.28975" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP3">
 <contactref element="ROTARY_DIP" pad="8"/>
@@ @@ -19097,13 +19097,14 @@ Please make sure your boards conform to @@
 <via x="33.8328" y="14.732" extent="1-16" drill="0.254"/>
 <wire x1="33.8328" y1="14.732" x2="31.098" y2="14.732" width="0.4064" layer="1"/>
 <wire x1="31.098" y1="14.732" x2="31.073" y2="14.707" width="0.4064" layer="1"/>
 <wire x1="55.1434" y1="37.1983" x2="55.7022" y2="37.2618" width="0.6096" layer="1"/>
 <wire x1="38.7096" y1="26.0096" x2="43.4975" y2="30.7975" width="0.4064" layer="1"/>
 <wire x1="43.4975" y1="30.7975" x2="56.515" y2="30.7975" width="0.4064" layer="1"/>
 <wire x1="56.515" y1="30.7975" x2="56.8325" y2="31.115" width="0.4064" layer="1"/>
 <wire x1="56.8325" y1="31.115" x2="56.8325" y2="35.8775" width="0.4064" layer="1"/>
 <wire x1="56.8325" y1="35.8775" x2="55.7022" y2="37.0078" width="0.4064" layer="1"/>
 <wire x1="55.7022" y1="37.0078" x2="55.7022" y2="37.2618" width="0.4064" layer="1"/>
 <wire x1="55.7022" y1="37.2618" x2="55.6387" y2="37.1983" width="0.4064" layer="1"/>
 <wire x1="55.6387" y1="37.1983" x2="55.1434" y2="37.1983" width="0.4064" layer="1"/>
 </signal>
 <signal name="DIP2">
 <contactref element="ROTARY_DIP" pad="4"/>
@@ @@ -19244,11 +19245,10 @@ Please make sure your boards conform to @@
 <via x="23.6728" y="21.7424" extent="1-16" drill="0.254"/>
 <via x="31.5976" y="11.4808" extent="1-16" drill="0.254"/>
 <wire x1="31.5976" y1="11.4808" x2="33.186" y2="11.4808" width="0.4064" layer="1"/>
-<wire x1="25.908" y1="13.208" x2="25.908" y2="19.5072" width="0.4064" layer="16"/>
+<wire x1="25.908" y1="12.446" x2="25.908" y2="19.5072" width="0.4064" layer="16"/>
 <wire x1="25.908" y1="19.5072" x2="23.6728" y2="21.7424" width="0.4064" layer="16"/>
 <wire x1="25.908" y1="13.208" x2="26.924" y2="12.192" width="0.4064" layer="16"/>
 <wire x1="26.924" y1="12.192" x2="30.8864" y2="12.192" width="0.4064" layer="16"/>
 <wire x1="30.8864" y1="12.192" x2="31.5976" y2="11.4808" width="0.4064" layer="16"/>
 <wire x1="25.908" y1="12.446" x2="26.8732" y2="11.4808" width="0.4064" layer="16"/>
 <wire x1="26.8732" y1="11.4808" x2="31.5976" y2="11.4808" width="0.4064" layer="16"/>
 </signal>
 <signal name="N$1">
 <contactref element="R_LED0" pad="1"/>
@@ @@ -19524,14 +19524,6 @@ Please make sure your boards conform to @@
 <vertex x="37.3888" y="23.43785"/>
 </polygon>
 </signal>
 <signal name="N$62">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="22.84095"/>
 <vertex x="36.8808" y="22.7584"/>
 <vertex x="37.3888" y="22.7584"/>
 <vertex x="37.3888" y="22.84095"/>
 </polygon>
 </signal>
 <signal name="N$63">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="17.4752"/>
@@ @@ -19564,14 +19556,6 @@ Please make sure your boards conform to @@
 <vertex x="37.3888" y="20.85975"/>
 </polygon>
 </signal>
 <signal name="N$67">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="36.8808" y="21.4376"/>
 <vertex x="36.8808" y="21.35505"/>
 <vertex x="37.2872" y="21.35505"/>
 <vertex x="37.2872" y="21.4376"/>
 </polygon>
 </signal>
 <signal name="N$70">
 <polygon width="0.0254" layer="1" pour="cutout">
 <vertex x="44.97705" y="28.6512"/>

slave/slave.sch

➞

Show inline comments

 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="6.4">
+<eagle version="6.3">
 <drawing>
 <settings>
 <setting alwaysvectorfont="no"/>

0 comments (0 inline, 0 general)