diff --git a/slave/slave.brd b/slave/slave.brd
--- a/slave/slave.brd
+++ b/slave/slave.brd
@@ -15,7 +15,7 @@
 <layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
 <layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
@@ -134,23 +134,22 @@
 <text x="-19.812" y="44.704" size="1.778" layer="25">DO NOT MOVE RINGS, PIN HEADERS, OR PCB DIMMENSIONS. THEY ARE ACCURATELY PLACED</text>
 <text x="2.58445" y="25.07615" size="1.778" layer="21">.</text>
 <text x="52.5272" y="28.7528" size="1.778" layer="21">.</text>
-<text x="17.4752" y="0.6096" size="1.778" layer="21">.</text>
 <text x="17.4752" y="38.5064" size="1.778" layer="21">.</text>
 <text x="50.5968" y="4.8768" size="1.6764" layer="21" font="vector">-</text>
 <text x="48.9712" y="4.8768" size="1.6764" layer="21" font="vector">+</text>
 <text x="0.8128" y="21.336" size="0.8128" layer="21" rot="SR270">ASC</text>
 <text x="0.8128" y="17.526" size="0.8128" layer="21" rot="SR270">RUN</text>
-<text x="8.89" y="0.8128" size="0.8128" layer="21" rot="SR0">HEAT</text>
+<text x="7.9375" y="0.8128" size="0.8128" layer="21" rot="SR0">HEAT</text>
 <text x="0.8128" y="13.335" size="0.8128" layer="21" rot="SR270">TX</text>
 <text x="0.8128" y="10.287" size="0.8128" layer="21" rot="SR270">STAT</text>
 <wire x1="0" y1="22.352" x2="4.699" y2="22.352" width="0.381" layer="21"/>
 <wire x1="5.334" y1="21.717" x2="5.334" y2="7.493" width="0.381" layer="21"/>
 <wire x1="4.699" y1="6.858" x2="0" y2="6.858" width="0.381" layer="21"/>
-<wire x1="11.557" y1="5.334" x2="8.763" y2="5.334" width="0.381" layer="21"/>
-<wire x1="12.192" y1="4.699" x2="12.192" y2="0" width="0.381" layer="21"/>
-<wire x1="8.128" y1="4.699" x2="8.128" y2="0" width="0.381" layer="21"/>
-<wire x1="8.128" y1="4.699" x2="8.763" y2="5.334" width="0.381" layer="21" curve="-90"/>
-<wire x1="12.192" y1="4.699" x2="11.557" y2="5.334" width="0.381" layer="21" curve="90"/>
+<wire x1="10.6045" y1="5.334" x2="7.8105" y2="5.334" width="0.381" layer="21"/>
+<wire x1="11.2395" y1="4.699" x2="11.2395" y2="0" width="0.381" layer="21"/>
+<wire x1="7.1755" y1="4.699" x2="7.1755" y2="0" width="0.381" layer="21"/>
+<wire x1="7.1755" y1="4.699" x2="7.8105" y2="5.334" width="0.381" layer="21" curve="-90"/>
+<wire x1="11.2395" y1="4.699" x2="10.6045" y2="5.334" width="0.381" layer="21" curve="90"/>
 <wire x1="4.699" y1="6.858" x2="5.334" y2="7.493" width="0.381" layer="21" curve="90"/>
 <wire x1="4.699" y1="22.352" x2="5.334" y2="21.717" width="0.381" layer="21" curve="-90"/>
 <text x="22.352" y="6.8072" size="0.8128" layer="22" rot="SMR90">VCC</text>
@@ -158,6 +157,8 @@
 <text x="17.3736" y="6.8072" size="0.8128" layer="22" rot="MR90">TX</text>
 <text x="14.8336" y="6.8072" size="0.8128" layer="22" rot="MR90">RX</text>
 <text x="-17.4625" y="42.8625" size="1.778" layer="21">Could shift headers to the right to keep them away from the ICSP connector</text>
+<circle x="14.2875" y="38.4175" radius="0.4490125" width="0.4064" layer="21"/>
+<circle x="22.86" y="4.7625" radius="0.4490125" width="0.4064" layer="21"/>
 </plain>
 <libraries>
 <library name="SparkFun">
@@ -18253,10 +18254,10 @@ Please make sure your boards conform to 
 <attribute name="NAME" x="36.195" y="24.9428" size="0.4064" layer="25" font="vector"/>
 <attribute name="VALUE" x="36.068" y="23.0378" size="0.4064" layer="27" font="vector"/>
 </element>
-<element name="ICSP" library="SparkFun" package="2X3-NS" value="AVR_SPI_PRG_6NS" x="5.334" y="28.5496">
-<attribute name="OC_NEWARK" value="unknown" x="5.334" y="28.5496" size="1.778" layer="27" display="off"/>
-<attribute name="MF" value="" x="5.334" y="28.5496" size="1.778" layer="27" display="off"/>
-<attribute name="MPN" value="" x="5.334" y="28.5496" size="1.778" layer="27" display="off"/>
+<element name="ICSP" library="SparkFun" package="2X3-NS" value="AVR_SPI_PRG_6NS" x="5.334" y="29.845">
+<attribute name="OC_NEWARK" value="unknown" x="5.334" y="29.845" size="1.778" layer="27" display="off"/>
+<attribute name="MF" value="" x="5.334" y="29.845" size="1.778" layer="27" display="off"/>
+<attribute name="MPN" value="" x="5.334" y="29.845" size="1.778" layer="27" display="off"/>
 </element>
 <element name="R_SCL" library="SparkFun" package="0603-RES" value="4.7k" x="13.9192" y="32.512" smashed="yes" rot="R270">
 <attribute name="OC_NEWARK" value="unknown" x="13.9192" y="32.512" size="1.778" layer="27" rot="R270" display="off"/>
@@ -18292,12 +18293,12 @@ Please make sure your boards conform to 
 <attribute name="NAME" x="33.147" y="12.2428" size="0.4064" layer="25" font="vector"/>
 <attribute name="VALUE" x="33.02" y="10.3378" size="0.4064" layer="27" font="vector"/>
 </element>
-<element name="R10" library="SparkFun" package="0603-RES" value="1M" x="41.8084" y="6.35" smashed="yes">
-<attribute name="OC_NEWARK" value="unknown" x="41.8084" y="6.35" size="1.778" layer="27" display="off"/>
-<attribute name="MF" value="" x="41.8084" y="6.35" size="1.778" layer="27" display="off"/>
-<attribute name="MPN" value="" x="41.8084" y="6.35" size="1.778" layer="27" display="off"/>
-<attribute name="NAME" x="40.9194" y="7.112" size="0.4064" layer="25" font="vector"/>
-<attribute name="VALUE" x="40.7924" y="5.207" size="0.4064" layer="27" font="vector"/>
+<element name="R10" library="SparkFun" package="0603-RES" value="1M" x="43.0784" y="6.6675" smashed="yes">
+<attribute name="OC_NEWARK" value="unknown" x="43.0784" y="6.6675" size="1.778" layer="27" display="off"/>
+<attribute name="MF" value="" x="43.0784" y="6.6675" size="1.778" layer="27" display="off"/>
+<attribute name="MPN" value="" x="43.0784" y="6.6675" size="1.778" layer="27" display="off"/>
+<attribute name="NAME" x="42.1894" y="7.4295" size="0.4064" layer="25" font="vector"/>
+<attribute name="VALUE" x="42.0624" y="5.5245" size="0.4064" layer="27" font="vector"/>
 </element>
 <element name="R_HEAT" library="SparkFun" package="R2512" value="20R" x="45.4152" y="13.716" smashed="yes" rot="R180">
 <attribute name="NAME" x="48.9712" y="16.7894" size="1.27" layer="25" rot="R180"/>
@@ -18313,12 +18314,12 @@ Please make sure your boards conform to 
 <attribute name="MF" value="" x="11.684" y="28.702" size="1.778" layer="27" rot="R270" display="off"/>
 <attribute name="MPN" value="" x="11.684" y="28.702" size="1.778" layer="27" rot="R270" display="off"/>
 </element>
-<element name="Q1" library="SparkFun" package="SOT23-3" value="MOSFET-PCHANNELSMD" x="42.0116" y="9.652" smashed="yes">
-<attribute name="OC_NEWARK" value="unknown" x="42.0116" y="9.652" size="1.778" layer="27" display="off"/>
-<attribute name="MF" value="" x="42.0116" y="9.652" size="1.778" layer="27" display="off"/>
-<attribute name="MPN" value="" x="42.0116" y="9.652" size="1.778" layer="27" display="off"/>
-<attribute name="NAME" x="41.1861" y="11.43" size="0.4064" layer="25"/>
-<attribute name="VALUE" x="40.9956" y="9.4615" size="0.4064" layer="27"/>
+<element name="Q1" library="SparkFun" package="SOT23-3" value="MOSFET-PCHANNELSMD" x="43.2816" y="9.652" smashed="yes">
+<attribute name="OC_NEWARK" value="unknown" x="43.2816" y="9.652" size="1.778" layer="27" display="off"/>
+<attribute name="MF" value="" x="43.2816" y="9.652" size="1.778" layer="27" display="off"/>
+<attribute name="MPN" value="" x="43.2816" y="9.652" size="1.778" layer="27" display="off"/>
+<attribute name="NAME" x="42.4561" y="11.43" size="0.4064" layer="25"/>
+<attribute name="VALUE" x="42.2656" y="9.4615" size="0.4064" layer="27"/>
 </element>
 <element name="Q2" library="transistor-npn" package="SOT23-BEC" value="BC849SMD" x="38.1" y="9.652" smashed="yes" rot="R180">
 <attribute name="OC_NEWARK" value="unknown" x="38.1" y="9.652" size="1.778" layer="27" rot="R180" display="off"/>
@@ -18348,12 +18349,12 @@ Please make sure your boards conform to 
 <attribute name="NAME" x="3.302" y="8.001" size="0.4064" layer="25" font="vector" rot="R90"/>
 <attribute name="VALUE" x="5.207" y="7.874" size="0.4064" layer="27" font="vector" rot="R90"/>
 </element>
-<element name="R_LED3" library="SparkFun" package="0603-RES" value="65" x="10.16" y="4.064" smashed="yes" rot="R180">
-<attribute name="OC_NEWARK" value="unknown" x="10.16" y="4.064" size="1.778" layer="27" rot="R180" display="off"/>
-<attribute name="MF" value="" x="10.16" y="4.064" size="1.778" layer="27" rot="R180" display="off"/>
-<attribute name="MPN" value="" x="10.16" y="4.064" size="1.778" layer="27" rot="R180" display="off"/>
-<attribute name="NAME" x="11.049" y="3.302" size="0.4064" layer="25" font="vector" rot="R180"/>
-<attribute name="VALUE" x="11.176" y="5.207" size="0.4064" layer="27" font="vector" rot="R180"/>
+<element name="R_LED3" library="SparkFun" package="0603-RES" value="65" x="9.2075" y="4.064" smashed="yes" rot="R180">
+<attribute name="OC_NEWARK" value="unknown" x="9.2075" y="4.064" size="1.778" layer="27" rot="R180" display="off"/>
+<attribute name="MF" value="" x="9.2075" y="4.064" size="1.778" layer="27" rot="R180" display="off"/>
+<attribute name="MPN" value="" x="9.2075" y="4.064" size="1.778" layer="27" rot="R180" display="off"/>
+<attribute name="NAME" x="10.0965" y="3.302" size="0.4064" layer="25" font="vector" rot="R180"/>
+<attribute name="VALUE" x="10.2235" y="5.207" size="0.4064" layer="27" font="vector" rot="R180"/>
 </element>
 <element name="LED0" library="adafruit" package="CHIPLED_0603" value="Blue" x="2.54" y="16.51" smashed="yes">
 <attribute name="OC_NEWARK" value="unknown" x="2.54" y="16.51" size="1.778" layer="27" display="off"/>
@@ -18373,11 +18374,11 @@ Please make sure your boards conform to 
 <attribute name="MPN" value="" x="2.54" y="8.89" size="1.778" layer="27" display="off"/>
 <attribute name="VALUE" x="4.445" y="7.62" size="1.27" layer="27" rot="R90"/>
 </element>
-<element name="LED3" library="adafruit" package="CHIPLED_0603" value="White" x="10.16" y="2.54" smashed="yes" rot="R90">
-<attribute name="OC_NEWARK" value="unknown" x="10.16" y="2.54" size="1.778" layer="27" rot="R90" display="off"/>
-<attribute name="MF" value="" x="10.16" y="2.54" size="1.778" layer="27" rot="R90" display="off"/>
-<attribute name="MPN" value="" x="10.16" y="2.54" size="1.778" layer="27" rot="R90" display="off"/>
-<attribute name="VALUE" x="11.43" y="4.445" size="1.27" layer="27" rot="R180"/>
+<element name="LED3" library="adafruit" package="CHIPLED_0603" value="White" x="9.2075" y="2.54" smashed="yes" rot="R90">
+<attribute name="OC_NEWARK" value="unknown" x="9.2075" y="2.54" size="1.778" layer="27" rot="R90" display="off"/>
+<attribute name="MF" value="" x="9.2075" y="2.54" size="1.778" layer="27" rot="R90" display="off"/>
+<attribute name="MPN" value="" x="9.2075" y="2.54" size="1.778" layer="27" rot="R90" display="off"/>
+<attribute name="VALUE" x="10.4775" y="4.445" size="1.27" layer="27" rot="R180"/>
 </element>
 <element name="U$2" library="SeniorDesign" package="CRYS_3.2X1.5" value="32.768 kHz" x="36.4744" y="14.8336" smashed="yes">
 <attribute name="OC_NEWARK" value="unknown" x="36.4744" y="14.8336" size="1.778" layer="27" display="off"/>
@@ -18425,9 +18426,9 @@ Please make sure your boards conform to 
 </element>
 <element name="U$9" library="SeniorDesign" package="CU" value="" x="8.4328" y="24.6888" rot="R270"/>
 <element name="U$4" library="SeniorDesign" package="SLAVE-LOGO-SILK" value="" x="32.258" y="15.24" rot="MR0"/>
-<element name="JP4" library="SparkFun" package="1X04" value="" x="15.24" y="5.4864"/>
+<element name="JP4" library="SparkFun" package="1X04" value="" x="13.462" y="2.54"/>
 <element name="JP3" library="SparkFun" package="1X10-2MM" value="M102MM" x="17.78" y="36.83"/>
-<element name="JP5" library="SparkFun" package="1X10-2MM" value="M102MM" x="17.78" y="2.54"/>
+<element name="JP5" library="SparkFun" package="1X10-2MM" value="M102MM" x="25.4" y="2.54"/>
 </elements>
 <signals>
 <signal name="GND">
@@ -18562,10 +18563,8 @@ Please make sure your boards conform to 
 <wire x1="26.0096" y1="17.78" x2="26.0096" y2="23.6436" width="0.4064" layer="1"/>
 <wire x1="26.0096" y1="23.6436" x2="26.073" y2="23.707" width="0.4064" layer="1"/>
 <wire x1="11.684" y1="29.552" x2="11.684" y2="29.5656" width="0.4064" layer="1"/>
-<wire x1="9.3472" y1="32.004" x2="4.9784" y2="32.004" width="0.4064" layer="1"/>
 <wire x1="25.1968" y1="12.1832" x2="25.273" y2="12.107" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="24.1808" x2="36.234" y2="22.098" width="0.4064" layer="1"/>
-<wire x1="4.9784" y1="32.004" x2="2.794" y2="29.8196" width="0.4064" layer="1"/>
 <wire x1="17.272" y1="31.662" x2="21.766" y2="31.662" width="0.4064" layer="1"/>
 <wire x1="21.766" y1="31.662" x2="21.844" y2="31.584" width="0.4064" layer="1"/>
 <wire x1="53.026" y1="24.511" x2="52.1462" y2="24.511" width="0.4064" layer="1"/>
@@ -18573,9 +18572,6 @@ Please make sure your boards conform to 
 <via x="51.4096" y="23.7744" extent="1-16" drill="0.254"/>
 <wire x1="15.328" y1="20.066" x2="15.328" y2="20.232" width="0.4064" layer="1"/>
 <wire x1="15.328" y1="20.232" x2="13.4112" y2="22.1488" width="0.4064" layer="1"/>
-<wire x1="9.3472" y1="32.004" x2="11.3792" y2="29.972" width="0.4064" layer="1"/>
-<wire x1="11.3792" y1="29.972" x2="11.3792" y2="29.8568" width="0.4064" layer="1"/>
-<wire x1="11.3792" y1="29.8568" x2="11.684" y2="29.552" width="0.4064" layer="1"/>
 <wire x1="25.1968" y1="12.1832" x2="25.1968" y2="15.748" width="0.4064" layer="1"/>
 <wire x1="25.1968" y1="15.748" x2="26.0096" y2="16.5608" width="0.4064" layer="1"/>
 <wire x1="16.6498" y1="18.707" x2="15.3416" y2="20.0152" width="0.4064" layer="1"/>
@@ -18587,20 +18583,13 @@ Please make sure your boards conform to 
 <wire x1="13.3096" y1="22.1488" x2="12.8016" y2="22.6568" width="0.4064" layer="1"/>
 <wire x1="12.8016" y1="22.6568" x2="3.2512" y2="22.6568" width="0.4064" layer="1"/>
 <wire x1="3.2512" y1="22.6568" x2="1.016" y2="24.892" width="0.4064" layer="1"/>
-<wire x1="1.016" y1="24.892" x2="1.016" y2="28.448" width="0.4064" layer="1"/>
-<wire x1="1.016" y1="28.448" x2="2.032" y2="29.464" width="0.4064" layer="1"/>
+<wire x1="1.016" y1="24.892" x2="1.016" y2="29.337" width="0.4064" layer="1"/>
 <wire x1="57.912" y1="16.002" x2="57.912" y2="9.537" width="0.8128" layer="16"/>
 <wire x1="57.912" y1="16.002" x2="56.8452" y2="16.002" width="0.4064" layer="16"/>
 <wire x1="56.8452" y1="16.002" x2="49.784" y2="23.0632" width="0.4064" layer="16"/>
 <wire x1="51.4096" y1="23.7744" x2="50.4952" y2="23.7744" width="0.4064" layer="16"/>
 <wire x1="50.4952" y1="23.7744" x2="49.784" y2="23.0632" width="0.4064" layer="16"/>
 <wire x1="6.096" y1="19.812" x2="1.0668" y2="24.8412" width="0.6096" layer="16"/>
-<wire x1="1.0668" y1="24.8412" x2="1.0668" y2="28.4988" width="0.6096" layer="16"/>
-<wire x1="1.0668" y1="28.4988" x2="1.1176" y2="28.5496" width="0.4064" layer="16"/>
-<wire x1="1.1176" y1="28.5496" x2="1.16256875" y2="28.5496" width="0.4064" layer="16"/>
-<wire x1="1.16256875" y1="28.5496" x2="2.301821875" y2="29.688853125" width="0.6096" layer="16"/>
-<wire x1="2.301821875" y1="29.688853125" x2="2.663253125" y2="29.688853125" width="0.4064" layer="16"/>
-<wire x1="2.663253125" y1="29.688853125" x2="2.794" y2="29.8196" width="0.4064" layer="16"/>
 <wire x1="36.234" y1="24.1808" x2="36.234" y2="24.3468" width="0.4064" layer="1"/>
 <wire x1="36.234" y1="24.3468" x2="36.9824" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="37.934" y1="18.1356" x2="39.46045" y2="18.1356" width="0.4064" layer="1"/>
@@ -18631,16 +18620,9 @@ Please make sure your boards conform to 
 <wire x1="6.096" y1="19.812" x2="6.096" y2="6.9088" width="0.6096" layer="16"/>
 <contactref element="JP4" pad="4"/>
 <contactref element="JP5" pad="3"/>
-<wire x1="21.7424" y1="2.5024" x2="21.78" y2="2.54" width="0.4064" layer="16"/>
-<wire x1="21.78" y1="2.54" x2="21.78" y2="4.4064" width="0.4064" layer="16"/>
-<wire x1="21.78" y1="4.4064" x2="22.86" y2="5.4864" width="0.4064" layer="16"/>
-<wire x1="52.324" y1="0.8128" x2="21.78" y2="0.8128" width="0.6096" layer="16"/>
-<wire x1="21.78" y1="0.8128" x2="21.78" y2="2.54" width="0.6096" layer="16"/>
-<wire x1="21.78" y1="0.8128" x2="12.192" y2="0.8128" width="0.6096" layer="16"/>
-<wire x1="12.192" y1="0.8128" x2="6.096" y2="6.9088" width="0.6096" layer="16"/>
+<wire x1="52.324" y1="0.8128" x2="11.2395" y2="0.8128" width="0.6096" layer="16"/>
+<wire x1="11.2395" y1="0.8128" x2="6.096" y2="6.9088" width="0.6096" layer="16"/>
 <wire x1="13.628" y1="22.1488" x2="13.4112" y2="22.1488" width="0.4064" layer="1"/>
-<wire x1="2.032" y1="29.464" x2="2.4384" y2="29.464" width="0.4064" layer="1"/>
-<wire x1="2.4384" y1="29.464" x2="2.794" y2="29.8196" width="0.4064" layer="1"/>
 <wire x1="60.1472" y1="8.0264" x2="60.1472" y2="9.4264" width="0.4064" layer="1"/>
 <wire x1="60.1472" y1="9.4264" x2="60.1248" y2="9.4488" width="0.4064" layer="1"/>
 <wire x1="15.328" y1="20.066" x2="15.328" y2="20.0288" width="0.4064" layer="1"/>
@@ -18648,6 +18630,15 @@ Please make sure your boards conform to 
 <wire x1="59.524" y1="7.4168" x2="59.536" y2="7.4168" width="0.4064" layer="1"/>
 <wire x1="59.536" y1="7.4168" x2="59.5876" y2="7.3652" width="0.4064" layer="1"/>
 <wire x1="60.1248" y1="9.2456" x2="60.1248" y2="9.4488" width="0.4064" layer="1"/>
+<wire x1="1.016" y1="29.337" x2="2.794" y2="31.115" width="0.4064" layer="1"/>
+<wire x1="13.9192" y1="31.662" x2="10.883" y2="31.662" width="0.4064" layer="1"/>
+<wire x1="10.883" y1="31.662" x2="9.525" y2="33.02" width="0.4064" layer="1"/>
+<wire x1="9.525" y1="33.02" x2="4.699" y2="33.02" width="0.4064" layer="1"/>
+<wire x1="4.699" y1="33.02" x2="2.794" y2="31.115" width="0.4064" layer="1"/>
+<wire x1="1.0668" y1="24.8412" x2="1.0668" y2="29.3878" width="0.6096" layer="16"/>
+<wire x1="1.0668" y1="29.3878" x2="2.794" y2="31.115" width="0.6096" layer="16"/>
+<wire x1="21.082" y1="2.54" x2="29.4" y2="2.54" width="0" layer="19" extent="1-1"/>
+<wire x1="11.2395" y1="0.8128" x2="21.082" y2="2.54" width="0" layer="19" extent="16-16"/>
 </signal>
 <signal name="RESET">
 <contactref element="R1" pad="2"/>
@@ -18659,10 +18650,10 @@ Please make sure your boards conform to 
 <wire x1="15.328" y1="22.264" x2="14.1224" y2="23.4696" width="0.4064" layer="1"/>
 <wire x1="14.1224" y1="23.4696" x2="7.9248" y2="23.4696" width="0.4064" layer="1"/>
 <via x="7.9248" y="23.4696" extent="1-16" drill="0.254"/>
-<wire x1="7.9248" y1="23.4696" x2="7.9248" y2="27.2288" width="0.4064" layer="16"/>
-<wire x1="7.9248" y1="27.2288" x2="7.874" y2="27.2796" width="0.4064" layer="16"/>
+<wire x1="7.9248" y1="23.4696" x2="7.9248" y2="28.5242" width="0.4064" layer="16"/>
 <wire x1="15.3289" y1="21.9583" x2="15.3289" y2="22.1479" width="0.4064" layer="1"/>
 <wire x1="15.3289" y1="22.1479" x2="15.328" y2="22.1488" width="0.4064" layer="1"/>
+<wire x1="7.9248" y1="28.5242" x2="7.874" y2="28.575" width="0.4064" layer="16"/>
 </signal>
 <signal name="N$2">
 <contactref element="BATT" pad="1"/>
@@ -18682,9 +18673,9 @@ Please make sure your boards conform to 
 <wire x1="62.23" y1="25.8064" x2="61.087" y2="26.9494" width="0.8128" layer="1"/>
 <wire x1="61.087" y1="26.9494" x2="60.96" y2="27.0764" width="0.8128" layer="1"/>
 <wire x1="60.96" y1="27.0764" x2="58.353" y2="27.0764" width="0.8128" layer="1"/>
-<wire x1="42.9616" y1="8.652" x2="42.9616" y2="6.35" width="0.6096" layer="1"/>
-<wire x1="42.9616" y1="6.35" x2="42.9616" y2="6.196" width="0.6096" layer="1"/>
-<wire x1="42.9616" y1="8.652" x2="46.498" y2="8.652" width="0.6096" layer="1"/>
+<wire x1="44.2316" y1="8.652" x2="44.2316" y2="6.6675" width="0.6096" layer="1"/>
+<wire x1="44.2316" y1="6.6675" x2="44.2316" y2="6.5135" width="0.6096" layer="1"/>
+<wire x1="44.2316" y1="8.652" x2="46.498" y2="8.652" width="0.6096" layer="1"/>
 <wire x1="46.498" y1="8.652" x2="47.498" y2="9.652" width="0.6096" layer="1"/>
 <wire x1="47.498" y1="9.652" x2="51.072" y2="9.652" width="0.6096" layer="1"/>
 <wire x1="51.072" y1="9.652" x2="51.392" y2="9.332" width="0.6096" layer="1"/>
@@ -18693,11 +18684,8 @@ Please make sure your boards conform to 
 <wire x1="55.372" y1="11.176" x2="55.372" y2="17.272" width="0.8128" layer="1"/>
 <wire x1="55.372" y1="17.272" x2="56.896" y2="18.796" width="0.8128" layer="1"/>
 <wire x1="56.896" y1="18.796" x2="60.452" y2="18.796" width="0.8128" layer="1"/>
-<wire x1="19.8374" y1="2.54" x2="21.5646" y2="0.8128" width="0.6096" layer="1"/>
-<wire x1="21.5646" y1="0.8128" x2="41.8592" y2="0.8128" width="0.6096" layer="1"/>
-<wire x1="41.8592" y1="0.8128" x2="42.672" y2="1.6256" width="0.6096" layer="1"/>
-<wire x1="42.672" y1="1.6256" x2="42.672" y2="6.3364" width="0.6096" layer="1"/>
-<wire x1="42.672" y1="6.3364" x2="42.6584" y2="6.35" width="0.6096" layer="1"/>
+<wire x1="23.1521" y1="0.8128" x2="43.4467" y2="0.8128" width="0.6096" layer="1"/>
+<wire x1="43.942" y1="6.6539" x2="43.9284" y2="6.6675" width="0.6096" layer="1"/>
 <wire x1="58.226" y1="28.321" x2="60.96" y2="28.321" width="0.8128" layer="1"/>
 <wire x1="60.96" y1="28.321" x2="60.96" y2="27.0764" width="0.8128" layer="1"/>
 <contactref element="C6" pad="1"/>
@@ -18713,12 +18701,13 @@ Please make sure your boards conform to 
 <wire x1="60.2488" y1="29.3624" x2="61.1408" y2="29.3624" width="0.4064" layer="1"/>
 <wire x1="35.8648" y1="33.1216" x2="36.9824" y2="34.2392" width="0.4064" layer="16"/>
 <contactref element="JP5" pad="2"/>
-<wire x1="19.78" y1="2.54" x2="19.8374" y2="2.54" width="0.6096" layer="1"/>
-<wire x1="42.672" y1="6.3364" x2="42.948" y2="6.3364" width="0.4064" layer="1"/>
-<wire x1="42.948" y1="6.3364" x2="42.9616" y2="6.35" width="0.4064" layer="1"/>
+<wire x1="43.942" y1="6.6539" x2="44.218" y2="6.6539" width="0.4064" layer="1"/>
+<wire x1="44.218" y1="6.6539" x2="44.2316" y2="6.6675" width="0.4064" layer="1"/>
 <wire x1="58.226" y1="27.051" x2="58.3276" y2="27.051" width="0.4064" layer="1"/>
 <wire x1="58.3276" y1="27.051" x2="58.353" y2="27.0764" width="0.4064" layer="1"/>
 <wire x1="35.8276" y1="33.0844" x2="35.8648" y2="33.1216" width="0.4064" layer="1"/>
+<wire x1="43.4467" y1="0.8128" x2="44.2316" y2="6.5135" width="0" layer="19" extent="1-1"/>
+<wire x1="27.4" y1="2.54" x2="23.1521" y2="0.8128" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="N$3">
 <contactref element="R2" pad="2"/>
@@ -18892,8 +18881,7 @@ Please make sure your boards conform to 
 <wire x1="16.3576" y1="23.2664" x2="15.3416" y2="24.2824" width="0.4064" layer="1"/>
 <wire x1="15.3416" y1="24.2824" x2="5.2832" y2="24.2824" width="0.4064" layer="1"/>
 <via x="5.2832" y="24.2824" extent="1-16" drill="0.254"/>
-<wire x1="5.2832" y1="24.2824" x2="5.2832" y2="27.2288" width="0.4064" layer="16"/>
-<wire x1="5.2832" y1="27.2288" x2="5.334" y2="27.2796" width="0.4064" layer="16"/>
+<wire x1="5.2832" y1="24.2824" x2="5.2832" y2="28.5242" width="0.4064" layer="16"/>
 <wire x1="19.473" y1="20.307" x2="20.333" y2="20.307" width="0.4064" layer="1"/>
 <wire x1="20.333" y1="20.307" x2="21.844" y2="18.796" width="0.4064" layer="1"/>
 <wire x1="21.844" y1="18.796" x2="24.7904" y2="18.796" width="0.4064" layer="1"/>
@@ -18902,7 +18890,8 @@ Please make sure your boards conform to 
 <contactref element="JP5" pad="6"/>
 <wire x1="24.7904" y1="8.8646" x2="27.6225" y2="6.0325" width="0.4064" layer="16"/>
 <wire x1="27.6225" y1="6.0325" x2="27.6225" y2="2.6975" width="0.4064" layer="16"/>
-<wire x1="27.6225" y1="2.6975" x2="27.78" y2="2.54" width="0.4064" layer="16"/>
+<wire x1="5.2832" y1="28.5242" x2="5.334" y2="28.575" width="0.4064" layer="16"/>
+<wire x1="27.6225" y1="2.6975" x2="35.4" y2="2.54" width="0" layer="19" extent="16-16"/>
 </signal>
 <signal name="MISO">
 <contactref element="IC1" pad="2"/>
@@ -18912,17 +18901,17 @@ Please make sure your boards conform to 
 <wire x1="17.0688" y1="22.352" x2="17.0688" y2="23.5712" width="0.4064" layer="1"/>
 <wire x1="17.0688" y1="23.5712" x2="15.5448" y2="25.0952" width="0.4064" layer="1"/>
 <wire x1="15.5448" y1="25.0952" x2="4.9784" y2="25.0952" width="0.4064" layer="1"/>
-<wire x1="2.8448" y1="27.2288" x2="2.794" y2="27.2796" width="0.4064" layer="1"/>
+<wire x1="2.8448" y1="27.2288" x2="2.794" y2="28.575" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="21.107" x2="20.4474" y2="21.107" width="0.4064" layer="1"/>
 <wire x1="20.4474" y1="21.107" x2="21.7424" y2="19.812" width="0.4064" layer="1"/>
 <wire x1="21.7424" y1="19.812" x2="23.6728" y2="19.812" width="0.4064" layer="1"/>
 <via x="23.6728" y="19.812" extent="1-16" drill="0.254"/>
 <wire x1="23.6728" y1="19.812" x2="23.6728" y2="8.7122" width="0.4064" layer="16"/>
-<wire x1="4.9784" y1="25.0952" x2="2.794" y2="27.2796" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="5"/>
 <wire x1="23.6728" y1="8.7122" x2="25.7175" y2="6.6675" width="0.4064" layer="16"/>
 <wire x1="25.7175" y1="6.6675" x2="25.7175" y2="2.4775" width="0.4064" layer="16"/>
-<wire x1="25.7175" y1="2.4775" x2="25.78" y2="2.54" width="0.4064" layer="16"/>
+<wire x1="4.9784" y1="25.0952" x2="2.8448" y2="27.2288" width="0.4064" layer="1"/>
+<wire x1="25.7175" y1="2.4775" x2="33.4" y2="2.54" width="0" layer="19" extent="16-16"/>
 </signal>
 <signal name="MOSI">
 <contactref element="IC1" pad="1"/>
@@ -18933,8 +18922,7 @@ Please make sure your boards conform to 
 <wire x1="17.78" y1="23.876" x2="15.8496" y2="25.8064" width="0.4064" layer="1"/>
 <wire x1="15.8496" y1="25.8064" x2="7.2136" y2="25.8064" width="0.4064" layer="1"/>
 <wire x1="7.2136" y1="25.8064" x2="6.604" y2="26.416" width="0.4064" layer="1"/>
-<wire x1="6.604" y1="26.416" x2="6.604" y2="28.5496" width="0.3048" layer="1"/>
-<wire x1="6.604" y1="28.5496" x2="5.334" y2="29.8196" width="0.3048" layer="1"/>
+<wire x1="6.604" y1="26.416" x2="6.604" y2="29.845" width="0.3048" layer="1"/>
 <wire x1="19.473" y1="21.907" x2="20.5618" y2="21.907" width="0.4064" layer="1"/>
 <wire x1="20.5618" y1="21.907" x2="21.6408" y2="20.828" width="0.4064" layer="1"/>
 <wire x1="21.6408" y1="20.828" x2="22.5552" y2="20.828" width="0.4064" layer="1"/>
@@ -18943,7 +18931,8 @@ Please make sure your boards conform to 
 <wire x1="24.765" y1="6.3881" x2="22.5552" y2="8.5979" width="0.4064" layer="16"/>
 <contactref element="JP5" pad="4"/>
 <wire x1="24.765" y1="6.3881" x2="24.765" y2="3.525" width="0.4064" layer="16"/>
-<wire x1="24.765" y1="3.525" x2="23.78" y2="2.54" width="0.4064" layer="16"/>
+<wire x1="6.604" y1="29.845" x2="5.334" y2="31.115" width="0.3048" layer="1"/>
+<wire x1="24.765" y1="3.525" x2="31.4" y2="2.54" width="0" layer="19" extent="16-16"/>
 </signal>
 <signal name="N$10">
 <contactref element="Y2" pad="3"/>
@@ -19019,17 +19008,17 @@ Please make sure your boards conform to 
 <signal name="RXD1">
 <contactref element="IC1" pad="11"/>
 <contactref element="JP4" pad="1"/>
-<wire x1="15.24" y1="5.4864" x2="19.5072" y2="9.7536" width="0.4064" layer="16"/>
 <wire x1="19.5072" y1="9.7536" x2="19.5072" y2="12.9032" width="0.4064" layer="16"/>
 <via x="19.5072" y="12.9032" extent="1-16" drill="0.254"/>
 <wire x1="19.5072" y1="12.9032" x2="19.473" y2="12.9374" width="0.4064" layer="1"/>
 <wire x1="19.473" y1="12.9374" x2="19.473" y2="13.907" width="0.4064" layer="1"/>
+<wire x1="13.462" y1="2.54" x2="19.5072" y2="9.7536" width="0" layer="19" extent="16-16"/>
 </signal>
 <signal name="TXD1">
 <contactref element="IC1" pad="12"/>
 <contactref element="JP4" pad="2"/>
-<wire x1="17.78" y1="5.4864" x2="21.273" y2="8.9794" width="0.4064" layer="1"/>
 <wire x1="21.273" y1="8.9794" x2="21.273" y2="12.107" width="0.4064" layer="1"/>
+<wire x1="16.002" y1="2.54" x2="21.273" y2="8.9794" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PD7">
 <contactref element="IC1" pad="16"/>
@@ -19037,8 +19026,8 @@ Please make sure your boards conform to 
 <wire x1="24.473" y1="10.8838" x2="29.0703" y2="6.2865" width="0.4064" layer="1"/>
 <wire x1="29.0703" y1="6.2865" x2="33.655" y2="6.2865" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="10"/>
-<wire x1="35.78" y1="2.54" x2="35.78" y2="4.1615" width="0.4064" layer="1"/>
 <wire x1="35.78" y1="4.1615" x2="33.655" y2="6.2865" width="0.4064" layer="1"/>
+<wire x1="35.78" y1="4.1615" x2="43.4" y2="2.54" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PD6">
 <contactref element="IC1" pad="15"/>
@@ -19046,8 +19035,8 @@ Please make sure your boards conform to 
 <wire x1="23.673" y1="10.4646" x2="28.6639" y2="5.4737" width="0.4064" layer="1"/>
 <wire x1="28.6639" y1="5.4737" x2="32.7025" y2="5.4737" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="9"/>
-<wire x1="33.78" y1="2.54" x2="33.78" y2="4.3962" width="0.4064" layer="1"/>
 <wire x1="33.78" y1="4.3962" x2="32.7025" y2="5.4737" width="0.4064" layer="1"/>
+<wire x1="33.78" y1="4.3962" x2="41.4" y2="2.54" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PD5">
 <contactref element="IC1" pad="14"/>
@@ -19055,8 +19044,8 @@ Please make sure your boards conform to 
 <wire x1="22.873" y1="10.0454" x2="28.2575" y2="4.6609" width="0.4064" layer="1"/>
 <wire x1="28.2575" y1="4.6609" x2="31.4325" y2="4.6609" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="8"/>
-<wire x1="31.78" y1="2.54" x2="31.78" y2="4.3134" width="0.4064" layer="1"/>
 <wire x1="31.78" y1="4.3134" x2="31.4325" y2="4.6609" width="0.4064" layer="1"/>
+<wire x1="31.78" y1="4.3134" x2="39.4" y2="2.54" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="PD4">
 <contactref element="IC1" pad="13"/>
@@ -19064,8 +19053,8 @@ Please make sure your boards conform to 
 <wire x1="22.073" y1="9.6262" x2="27.8511" y2="3.8481" width="0.4064" layer="1"/>
 <wire x1="27.8511" y1="3.8481" x2="29.21" y2="3.8481" width="0.4064" layer="1"/>
 <contactref element="JP5" pad="7"/>
-<wire x1="29.78" y1="2.54" x2="29.78" y2="3.2781" width="0.4064" layer="1"/>
 <wire x1="29.78" y1="3.2781" x2="29.21" y2="3.8481" width="0.4064" layer="1"/>
+<wire x1="29.78" y1="3.2781" x2="37.4" y2="2.54" width="0" layer="19" extent="1-1"/>
 </signal>
 <signal name="DIP1">
 <contactref element="ROTARY_DIP" pad="2"/>
@@ -19198,10 +19187,10 @@ Please make sure your boards conform to 
 <wire x1="22.073" y1="24.8662" x2="21.5392" y2="25.4" width="0.4064" layer="1"/>
 <wire x1="16.6624" y1="11.7856" x2="16.6624" y2="23.9776" width="0.4064" layer="16"/>
 <wire x1="16.6624" y1="23.9776" x2="18.0848" y2="25.4" width="0.4064" layer="16"/>
-<wire x1="10.795" y1="5.9182" x2="10.795" y2="5.549" width="0.4064" layer="1"/>
-<wire x1="10.795" y1="5.549" x2="9.31" y2="4.064" width="0.4064" layer="1"/>
 <wire x1="16.6624" y1="11.7856" x2="10.795" y2="5.9182" width="0.4064" layer="16"/>
 <wire x1="18.0848" y1="25.4" x2="21.5392" y2="25.4" width="0.4064" layer="16"/>
+<wire x1="10.795" y1="5.9182" x2="10.2117" y2="5.9182" width="0.4064" layer="1"/>
+<wire x1="10.2117" y1="5.9182" x2="8.3575" y2="4.064" width="0.4064" layer="1"/>
 </signal>
 <signal name="ASSOCLED">
 <contactref element="U$1" pad="15"/>
@@ -19236,18 +19225,19 @@ Please make sure your boards conform to 
 <signal name="N$9">
 <contactref element="Q1" pad="3"/>
 <contactref element="R_HEAT" pad="2"/>
-<wire x1="42.0116" y1="10.752" x2="42.0056" y2="10.752" width="0.6096" layer="1"/>
-<wire x1="42.0056" y1="10.752" x2="42.0056" y2="13.1064" width="0.6096" layer="1"/>
-<wire x1="42.0056" y1="13.1064" x2="42.6152" y2="13.716" width="0.6096" layer="1"/>
+<wire x1="43.2816" y1="10.752" x2="43.18" y2="10.752" width="0.6096" layer="1"/>
+<wire x1="43.18" y1="10.752" x2="43.18" y2="13.6525" width="0.6096" layer="1"/>
+<wire x1="43.18" y1="13.6525" x2="42.6152" y2="13.6525" width="0.6096" layer="1"/>
+<wire x1="42.6152" y1="13.6525" x2="42.6152" y2="13.716" width="0.6096" layer="1"/>
 </signal>
 <signal name="N$14">
 <contactref element="Q2" pad="C"/>
 <contactref element="R10" pad="1"/>
 <contactref element="Q1" pad="1"/>
-<wire x1="38.1" y1="8.552" x2="41.0616" y2="8.552" width="0.4064" layer="1"/>
-<wire x1="41.0616" y1="8.552" x2="41.0616" y2="8.652" width="0.4064" layer="1"/>
-<wire x1="41.0616" y1="8.652" x2="40.9584" y2="8.652" width="0.4064" layer="1"/>
-<wire x1="40.9584" y1="8.652" x2="40.9584" y2="6.35" width="0.4064" layer="1"/>
+<wire x1="38.1" y1="8.552" x2="42.3316" y2="8.552" width="0.4064" layer="1"/>
+<wire x1="42.3316" y1="8.552" x2="42.3316" y2="8.652" width="0.4064" layer="1"/>
+<wire x1="42.2284" y1="6.6675" x2="42.3316" y2="6.6675" width="0.4064" layer="1"/>
+<wire x1="42.3316" y1="6.6675" x2="42.3316" y2="8.652" width="0.4064" layer="1"/>
 </signal>
 <signal name="HEAT">
 <contactref element="R9" pad="1"/>
@@ -19285,8 +19275,8 @@ Please make sure your boards conform to 
 <signal name="N$17">
 <contactref element="R_LED3" pad="1"/>
 <contactref element="LED3" pad="A"/>
-<wire x1="10.91" y1="2.54" x2="11.01" y2="2.54" width="0.4064" layer="1"/>
-<wire x1="11.01" y1="2.54" x2="11.01" y2="4.064" width="0.4064" layer="1"/>
+<wire x1="9.9575" y1="2.54" x2="10.0575" y2="2.54" width="0.4064" layer="1"/>
+<wire x1="10.0575" y1="2.54" x2="10.0575" y2="4.064" width="0.4064" layer="1"/>
 </signal>
 <signal name="N$18">
 <via x="3.81" y="35.56" extent="1-16" drill="3.2"/>
@@ -19412,10 +19402,10 @@ Please make sure your boards conform to 
 </signal>
 <signal name="N$35">
 <polygon width="0.0254" layer="1" pour="cutout">
-<vertex x="41.5544" y="6.9088"/>
-<vertex x="42.0624" y="6.9088"/>
-<vertex x="42.0624" y="7.09295"/>
-<vertex x="41.5544" y="7.09295"/>
+<vertex x="42.8244" y="7.2263"/>
+<vertex x="43.3324" y="7.2263"/>
+<vertex x="43.3324" y="7.41045"/>
+<vertex x="42.8244" y="7.41045"/>
 </polygon>
 </signal>
 <signal name="N$36">
@@ -19648,10 +19638,10 @@ Please make sure your boards conform to 
 </signal>
 <signal name="N$76">
 <polygon width="0.0254" layer="1" pour="cutout">
-<vertex x="43.3832" y="6.1976"/>
-<vertex x="43.4848" y="6.1976"/>
-<vertex x="43.4848" y="5.7912"/>
-<vertex x="43.3832" y="5.7912"/>
+<vertex x="44.6532" y="6.5151"/>
+<vertex x="44.7548" y="6.5151"/>
+<vertex x="44.7548" y="6.1087"/>
+<vertex x="44.6532" y="6.1087"/>
 </polygon>
 </signal>
 <signal name="N$77">
@@ -19841,18 +19831,18 @@ Please make sure your boards conform to 
 </signal>
 <signal name="N$44">
 <polygon width="0.0254" layer="1" pour="cutout">
-<vertex x="10.4648" y="2.032"/>
-<vertex x="9.8552" y="2.032"/>
-<vertex x="9.8552" y="1.89865"/>
-<vertex x="10.4648" y="1.89865"/>
+<vertex x="9.5123" y="2.032"/>
+<vertex x="8.9027" y="2.032"/>
+<vertex x="8.9027" y="1.89865"/>
+<vertex x="9.5123" y="1.89865"/>
 </polygon>
 </signal>
 <signal name="N$45">
 <polygon width="0.0254" layer="1" pour="cutout">
-<vertex x="8.8392" y="2.9464"/>
-<vertex x="8.76935" y="2.9464"/>
-<vertex x="8.76935" y="3.3528"/>
-<vertex x="8.8392" y="3.3528"/>
+<vertex x="7.8867" y="2.9464"/>
+<vertex x="7.81685" y="2.9464"/>
+<vertex x="7.81685" y="3.3528"/>
+<vertex x="7.8867" y="3.3528"/>
 </polygon>
 </signal>
 <signal name="N$46">