diff --git a/zoncoffee.brd b/zoncoffee.brd
--- a/zoncoffee.brd
+++ b/zoncoffee.brd
@@ -23,14 +23,14 @@
 <layer number="13" name="Route13" color="4" fill="5" visible="no" active="no"/>
 <layer number="14" name="Route14" color="1" fill="6" visible="no" active="no"/>
 <layer number="15" name="Route15" color="4" fill="6" visible="no" active="no"/>
-<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="yes"/>
 <layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 <layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 <layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
-<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
-<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="yes"/>
-<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="yes"/>
 <layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
 <layer number="25" name="tNames" color="7" fill="1" visible="no" active="yes"/>
 <layer number="26" name="bNames" color="7" fill="1" visible="no" active="yes"/>
@@ -2607,9 +2607,9 @@ design rules under a new name.</descript
 <contactref element="J1" pad="2"/>
 <wire x1="43.97375" y1="13.49375" x2="43.84625" y2="13.49375" width="0.2032" layer="1"/>
 <wire x1="43.84625" y1="13.49375" x2="43.815" y2="13.525" width="0.2032" layer="1"/>
-<wire x1="19.779375" y1="12.3825" x2="19.779375" y2="13.875625" width="0.2032" layer="1"/>
-<wire x1="19.779375" y1="13.875625" x2="19.685" y2="13.97" width="0.2032" layer="1"/>
-<wire x1="19.685" y1="13.97" x2="18.415" y2="13.97" width="0.2032" layer="1"/>
+<wire x1="19.779375" y1="12.3825" x2="19.779375" y2="13.675225" width="0.2032" layer="1"/>
+<wire x1="19.779375" y1="13.675225" x2="19.4846" y2="13.97" width="0.2032" layer="1"/>
+<wire x1="19.4846" y1="13.97" x2="18.415" y2="13.97" width="0.2032" layer="1"/>
 <via x="42.38625" y="5.635625" extent="1-16" drill="0.3048"/>
 <via x="44.370625" y="13.97" extent="1-16" drill="0.3048"/>
 <wire x1="43.97375" y1="13.49375" x2="43.97375" y2="13.573125" width="0.2032" layer="1"/>
@@ -2619,12 +2619,12 @@ design rules under a new name.</descript
 <via x="0.873125" y="6.0325" extent="1-16" drill="0.3048"/>
 <wire x1="0.873125" y1="6.0325" x2="0.873125" y2="7.049375" width="0.2032" layer="1"/>
 <contactref element="U3" pad="1"/>
-<wire x1="29.36875" y1="9.525" x2="25.4" y2="9.525" width="0.2032" layer="1"/>
-<wire x1="25.4" y1="9.525" x2="24.670625" y2="8.795625" width="0.2032" layer="1"/>
+<wire x1="29.36875" y1="9.36625" x2="25.24125" y2="9.36625" width="0.2032" layer="1"/>
+<wire x1="25.24125" y1="9.36625" x2="24.670625" y2="8.795625" width="0.2032" layer="1"/>
 <wire x1="23.97125" y1="8.795625" x2="24.670625" y2="8.795625" width="0.2032" layer="1"/>
 <via x="29.36875" y="8.651875" extent="1-16" drill="0.3048"/>
-<wire x1="29.36875" y1="10.706875" x2="29.36875" y2="9.525" width="0.2032" layer="1"/>
-<wire x1="29.36875" y1="9.525" x2="29.36875" y2="8.651875" width="0.2032" layer="1"/>
+<wire x1="29.36875" y1="10.706875" x2="29.36875" y2="9.36625" width="0.2032" layer="1"/>
+<wire x1="29.36875" y1="9.36625" x2="29.36875" y2="8.651875" width="0.2032" layer="1"/>
 <wire x1="21.59" y1="10.5076" x2="21.59" y2="11.27125" width="0.2032" layer="1"/>
 <wire x1="21.59" y1="11.27125" x2="22.06625" y2="11.7475" width="0.2032" layer="1"/>
 <wire x1="22.06625" y1="11.7475" x2="22.06625" y2="12.3675" width="0.2032" layer="1"/>
@@ -2641,9 +2641,8 @@ design rules under a new name.</descript
 <wire x1="13.43625" y1="12.325" x2="13.17625" y2="12.065" width="0.2032" layer="1"/>
 <via x="13.17625" y="12.065" extent="1-16" drill="0.3048"/>
 <wire x1="13.17625" y1="12.065" x2="12.54125" y2="11.43" width="0.2032" layer="16"/>
-<via x="3.175" y="4.683125" extent="1-16" drill="0.3048"/>
-<wire x1="3.95375" y1="5.08" x2="3.571875" y2="5.08" width="0.2032" layer="1"/>
-<wire x1="3.571875" y1="5.08" x2="3.175" y2="4.683125" width="0.2032" layer="1"/>
+<via x="2.38125" y="5.08" extent="1-16" drill="0.3048"/>
+<wire x1="3.95375" y1="5.08" x2="2.38125" y2="5.08" width="0.2032" layer="1"/>
 <wire x1="6.53625" y1="6.725" x2="4.97875" y2="6.725" width="0.2032" layer="1"/>
 <wire x1="4.97875" y1="6.725" x2="4.048125" y2="5.794375" width="0.2032" layer="1"/>
 <wire x1="4.048125" y1="5.794375" x2="4.048125" y2="5.174375" width="0.2032" layer="1"/>
@@ -2735,11 +2734,6 @@ design rules under a new name.</descript
 <via x="3.175" y="11.27125" extent="1-16" drill="0.3048"/>
 <wire x1="22.5425" y1="7.9099" x2="22.5425" y2="8.969375" width="0.2032" layer="1"/>
 <wire x1="22.5425" y1="8.969375" x2="20.558125" y2="8.969375" width="0.2032" layer="1"/>
-<wire x1="20.558125" y1="8.969375" x2="19.84375" y2="9.68375" width="0.2032" layer="1"/>
-<wire x1="19.84375" y1="9.68375" x2="19.84375" y2="11.0603625" width="0.2032" layer="1"/>
-<wire x1="19.84375" y1="11.0603625" x2="19.4741125" y2="11.43" width="0.2032" layer="1"/>
-<wire x1="19.4741125" y1="11.43" x2="18.653125" y2="11.43" width="0.2032" layer="1"/>
-<wire x1="18.653125" y1="11.43" x2="18.494375" y2="11.58875" width="0.2032" layer="1"/>
 <contactref element="LCD1" pad="5"/>
 <contactref element="LCD1" pad="7"/>
 <wire x1="8.335" y1="10.01625" x2="7.55625" y2="10.00125" width="0.2032" layer="16"/>
@@ -2756,17 +2750,16 @@ design rules under a new name.</descript
 <wire x1="2.62875" y1="10.725" x2="3.175" y2="11.27125" width="0.2032" layer="1"/>
 <wire x1="10.63625" y1="10.00125" x2="10.63625" y2="11.31625" width="0.2032" layer="16"/>
 <wire x1="8.335" y1="11.31625" x2="10.63625" y2="11.31625" width="0.2032" layer="16"/>
-<wire x1="18.494375" y1="11.58875" x2="18.494375" y2="12.3675" width="0.2032" layer="1"/>
 <wire x1="18.494375" y1="12.3675" x2="18.479375" y2="12.3825" width="0.2032" layer="1"/>
-<wire x1="18.479375" y1="12.3825" x2="17.859375" y2="12.3825" width="0.2032" layer="1"/>
-<wire x1="17.859375" y1="12.3825" x2="17.383125" y2="12.85875" width="0.2032" layer="1"/>
+<wire x1="18.479375" y1="12.3825" x2="17.224375" y2="12.3825" width="0.2032" layer="1"/>
+<wire x1="17.224375" y1="12.3825" x2="16.748125" y2="12.85875" width="0.2032" layer="1"/>
 <wire x1="8.335" y1="10.01625" x2="3.34875" y2="10.01625" width="0.2032" layer="16"/>
 <wire x1="3.34875" y1="10.01625" x2="3.33375" y2="10.00125" width="0.2032" layer="16"/>
 <wire x1="2.3625" y1="9.925" x2="3.2575" y2="9.925" width="0.2032" layer="1"/>
 <wire x1="3.2575" y1="9.925" x2="3.33375" y2="10.00125" width="0.2032" layer="1"/>
 <wire x1="3.22" y1="11.31625" x2="3.175" y2="11.27125" width="0.2032" layer="16"/>
 <contactref element="U3" pad="4"/>
-<wire x1="22.463125" y1="7.830525" x2="22.54" y2="7.9074" width="0.2032" layer="1"/>
+<wire x1="22.463125" y1="7.830525" x2="22.490725" y2="7.858125" width="0.2032" layer="1"/>
 <wire x1="23.97125" y1="10.095625" x2="23.97125" y2="10.63625" width="0.2032" layer="1"/>
 <wire x1="23.97125" y1="10.63625" x2="24.13" y2="10.795" width="0.2032" layer="1"/>
 <wire x1="24.13" y1="10.795" x2="25.470625" y2="10.795" width="0.2032" layer="1"/>
@@ -2776,10 +2769,8 @@ design rules under a new name.</descript
 <contactref element="U$8" pad="1"/>
 <contactref element="U$8" pad="5"/>
 <contactref element="U$8" pad="17"/>
-<wire x1="17.383125" y1="12.85875" x2="13.731875" y2="12.85875" width="0.2032" layer="1"/>
+<wire x1="16.748125" y1="12.85875" x2="13.731875" y2="12.85875" width="0.2032" layer="1"/>
 <via x="10.63625" y="8.651875" extent="1-16" drill="0.3048"/>
-<wire x1="5.25375" y1="5.08" x2="7.49125" y2="5.08" width="0.2032" layer="1"/>
-<wire x1="7.49125" y1="5.08" x2="7.83625" y2="5.425" width="0.2032" layer="1"/>
 <wire x1="13.43625" y1="13.625" x2="13.43625" y2="14.6625" width="0.2032" layer="1"/>
 <wire x1="13.43625" y1="14.6625" x2="13.255625" y2="14.843125" width="0.2032" layer="1"/>
 <wire x1="13.255625" y1="14.843125" x2="10.23625" y2="14.843125" width="0.2032" layer="1"/>
@@ -2790,20 +2781,27 @@ design rules under a new name.</descript
 <wire x1="13.731875" y1="12.85875" x2="13.573125" y2="13.0175" width="0.2032" layer="1"/>
 <wire x1="13.573125" y1="13.0175" x2="13.573125" y2="13.488125" width="0.2032" layer="1"/>
 <wire x1="13.573125" y1="13.488125" x2="13.43625" y2="13.625" width="0.2032" layer="1"/>
-<wire x1="10.63625" y1="8.651875" x2="8.255" y2="8.651875" width="0.2032" layer="1"/>
-<wire x1="8.255" y1="8.651875" x2="7.858125" y2="8.255" width="0.2032" layer="1"/>
-<wire x1="7.858125" y1="8.255" x2="7.858125" y2="5.446875" width="0.2032" layer="1"/>
+<wire x1="10.63625" y1="8.651875" x2="9.113153125" y2="8.651875" width="0.2032" layer="1"/>
+<wire x1="9.113153125" y1="8.651875" x2="7.858125" y2="7.396846875" width="0.2032" layer="1"/>
+<wire x1="7.858125" y1="7.396846875" x2="7.858125" y2="5.446875" width="0.2032" layer="1"/>
 <wire x1="7.858125" y1="5.446875" x2="7.83625" y2="5.425" width="0.2032" layer="1"/>
 <wire x1="10.63625" y1="11.31625" x2="10.63625" y2="12.065" width="0.2032" layer="16"/>
 <wire x1="10.63625" y1="12.065" x2="10.239375" y2="12.461875" width="0.2032" layer="16"/>
-<wire x1="10.23625" y1="14.843125" x2="7.635" y2="14.843125" width="0.2032" layer="1"/>
-<wire x1="7.635" y1="14.843125" x2="6.365" y2="13.573125" width="0.2032" layer="1"/>
+<wire x1="10.23625" y1="14.843125" x2="6.746875" y2="14.843125" width="0.2032" layer="1"/>
 <wire x1="20.94" y1="6.35" x2="20.94" y2="6.49375" width="0.2032" layer="1"/>
-<wire x1="20.94" y1="6.49375" x2="21.59" y2="7.14375" width="0.2032" layer="1"/>
-<wire x1="21.59" y1="7.14375" x2="21.59" y2="7.62" width="0.2032" layer="1"/>
-<wire x1="21.59" y1="7.62" x2="21.828125" y2="7.858125" width="0.2032" layer="1"/>
-<wire x1="21.828125" y1="7.858125" x2="22.490725" y2="7.858125" width="0.2032" layer="1"/>
+<wire x1="20.94" y1="6.49375" x2="22.06625" y2="7.62" width="0.2032" layer="1"/>
 <wire x1="22.490725" y1="7.858125" x2="22.54" y2="7.9074" width="0.2032" layer="1"/>
+<wire x1="20.558125" y1="8.969375" x2="18.494375" y2="11.033125" width="0.2032" layer="1"/>
+<wire x1="18.494375" y1="11.033125" x2="18.494375" y2="12.3675" width="0.2032" layer="1"/>
+<wire x1="7.83625" y1="5.425" x2="7.83625" y2="5.101875" width="0.2032" layer="1"/>
+<wire x1="7.83625" y1="5.101875" x2="7.858125" y2="5.08" width="0.2032" layer="1"/>
+<wire x1="7.858125" y1="5.08" x2="5.25375" y2="5.08" width="0.2032" layer="1"/>
+<wire x1="22.490725" y1="7.858125" x2="22.490725" y2="7.671775" width="0.2032" layer="1"/>
+<wire x1="22.490725" y1="7.671775" x2="22.5425" y2="7.62" width="0.2032" layer="1"/>
+<wire x1="22.5425" y1="7.62" x2="22.06625" y2="7.62" width="0.2032" layer="1"/>
+<wire x1="6.746875" y1="14.843125" x2="6.429375" y2="14.525625" width="0.2032" layer="1"/>
+<wire x1="6.429375" y1="14.525625" x2="6.429375" y2="13.6375" width="0.2032" layer="1"/>
+<wire x1="6.429375" y1="13.6375" x2="6.365" y2="13.573125" width="0.2032" layer="1"/>
 </signal>
 <signal name="V_BATT">
 <contactref element="JP2" pad="P1"/>
@@ -2819,23 +2817,22 @@ design rules under a new name.</descript
 <wire x1="20.6375" y1="10.5101" x2="20.64" y2="10.5076" width="0.2032" layer="1"/>
 <wire x1="20.78125" y1="12.3825" x2="20.78125" y2="13.47875" width="0.2032" layer="1"/>
 <wire x1="20.78125" y1="13.47875" x2="21.2725" y2="13.97" width="0.2032" layer="1"/>
-<via x="25.24125" y="12.779375" extent="1-16" drill="0.3048"/>
-<wire x1="23.00116875" y1="10.5076" x2="22.54" y2="10.5076" width="0.2032" layer="1"/>
+<via x="25.479375" y="12.779375" extent="1-16" drill="0.3048"/>
 <wire x1="32.42" y1="14.605" x2="31.115" y2="14.605" width="0.2032" layer="1"/>
 <via x="31.115" y="14.605" extent="1-16" drill="0.3048"/>
 <wire x1="20.64" y1="10.5076" x2="20.64" y2="12.24125" width="0.2032" layer="1"/>
 <wire x1="20.64" y1="12.24125" x2="20.78125" y2="12.3825" width="0.2032" layer="1"/>
-<wire x1="30.216975" y1="12.54125" x2="31.115" y2="13.439275" width="0.2032" layer="16"/>
+<wire x1="30.4551" y1="12.779375" x2="31.115" y2="13.439275" width="0.2032" layer="16"/>
 <wire x1="31.115" y1="13.439275" x2="31.115" y2="14.605" width="0.2032" layer="16"/>
-<wire x1="30.216975" y1="12.54125" x2="25.479375" y2="12.54125" width="0.2032" layer="16"/>
-<wire x1="25.479375" y1="12.54125" x2="25.24125" y2="12.779375" width="0.2032" layer="16"/>
-<wire x1="25.24125" y1="12.779375" x2="25.24125" y2="12.74768125" width="0.2032" layer="1"/>
-<wire x1="25.24125" y1="12.74768125" x2="23.00116875" y2="10.5076" width="0.2032" layer="1"/>
+<wire x1="30.4551" y1="12.779375" x2="25.479375" y2="12.779375" width="0.2032" layer="16"/>
+<wire x1="22.54" y1="10.5076" x2="22.54" y2="11.26875" width="0.2032" layer="1"/>
+<wire x1="22.54" y1="11.26875" x2="24.050625" y2="12.779375" width="0.2032" layer="1"/>
+<wire x1="25.479375" y1="12.779375" x2="24.050625" y2="12.779375" width="0.2032" layer="1"/>
 </signal>
 <signal name="SW-A">
 <contactref element="SW1" pad="1"/>
 <via x="32.54375" y="9.128125" extent="1-16" drill="0.3048"/>
-<wire x1="19.685" y1="10.398125" x2="31.27375" y2="10.398125" width="0.2032" layer="16"/>
+<wire x1="19.3675" y1="10.398125" x2="31.27375" y2="10.398125" width="0.2032" layer="16"/>
 <via x="17.93875" y="10.239375" extent="1-16" drill="0.3048"/>
 <wire x1="31.58391875" y1="8.16381875" x2="32.54375" y2="9.12365" width="0.2032" layer="1"/>
 <wire x1="32.54375" y1="9.12365" x2="32.54375" y2="9.128125" width="0.2032" layer="1"/>
@@ -2843,17 +2840,16 @@ design rules under a new name.</descript
 <contactref element="U$8" pad="28"/>
 <wire x1="14.73625" y1="9.125" x2="15.63375" y2="9.125" width="0.2032" layer="1"/>
 <wire x1="16.748125" y1="10.239375" x2="17.93875" y2="10.239375" width="0.2032" layer="1"/>
-<wire x1="19.685" y1="10.398125" x2="19.52625" y2="10.239375" width="0.2032" layer="16"/>
-<wire x1="19.52625" y1="10.239375" x2="17.93875" y2="10.239375" width="0.2032" layer="16"/>
+<wire x1="19.3675" y1="10.398125" x2="19.20875" y2="10.239375" width="0.2032" layer="16"/>
+<wire x1="19.20875" y1="10.239375" x2="17.93875" y2="10.239375" width="0.2032" layer="16"/>
 <wire x1="15.63375" y1="9.125" x2="16.748125" y2="10.239375" width="0.2032" layer="1"/>
 </signal>
 <signal name="SW-C">
 <contactref element="SW1" pad="3"/>
 <wire x1="33.56381875" y1="6.18391875" x2="33.48891875" y2="6.18391875" width="0.2032" layer="1"/>
 <via x="34.6075" y="7.14375" extent="1-16" drill="0.3048"/>
-<wire x1="19.685" y1="8.969375" x2="20.32" y2="9.604375" width="0.2032" layer="16"/>
-<wire x1="20.32" y1="9.604375" x2="30.32125" y2="9.604375" width="0.2032" layer="16"/>
-<wire x1="19.685" y1="8.969375" x2="19.129375" y2="8.969375" width="0.2032" layer="16"/>
+<wire x1="19.129375" y1="8.969375" x2="19.764375" y2="9.604375" width="0.2032" layer="16"/>
+<wire x1="19.764375" y1="9.604375" x2="30.32125" y2="9.604375" width="0.2032" layer="16"/>
 <via x="19.129375" y="8.969375" extent="1-16" drill="0.3048"/>
 <wire x1="33.56381875" y1="6.18391875" x2="33.64766875" y2="6.18391875" width="0.2032" layer="1"/>
 <wire x1="33.64766875" y1="6.18391875" x2="34.6075" y2="7.14375" width="0.2032" layer="1"/>
@@ -2868,13 +2864,13 @@ design rules under a new name.</descript
 <contactref element="SW1" pad="4"/>
 <via x="35.2425" y="11.826875" extent="1-16" drill="0.3048"/>
 <via x="16.906875" y="11.58875" extent="1-16" drill="0.3048"/>
-<wire x1="32.86125" y1="11.191875" x2="19.685" y2="11.191875" width="0.2032" layer="16"/>
+<wire x1="32.623125" y1="11.191875" x2="19.52625" y2="11.191875" width="0.2032" layer="16"/>
 <wire x1="36.286178125" y1="12.866078125" x2="36.281703125" y2="12.866078125" width="0.2032" layer="1"/>
 <wire x1="36.281703125" y1="12.866078125" x2="35.2425" y2="11.826875" width="0.2032" layer="1"/>
-<wire x1="32.86125" y1="11.191875" x2="33.49625" y2="11.826875" width="0.2032" layer="16"/>
-<wire x1="33.49625" y1="11.826875" x2="35.2425" y2="11.826875" width="0.2032" layer="16"/>
-<wire x1="19.685" y1="11.191875" x2="19.288125" y2="11.58875" width="0.2032" layer="16"/>
-<wire x1="19.288125" y1="11.58875" x2="16.906875" y2="11.58875" width="0.2032" layer="16"/>
+<wire x1="32.623125" y1="11.191875" x2="33.416875" y2="11.826875" width="0.2032" layer="16"/>
+<wire x1="33.416875" y1="11.826875" x2="35.2425" y2="11.826875" width="0.2032" layer="16"/>
+<wire x1="19.52625" y1="11.191875" x2="19.129375" y2="11.58875" width="0.2032" layer="16"/>
+<wire x1="19.129375" y1="11.58875" x2="16.906875" y2="11.58875" width="0.2032" layer="16"/>
 <contactref element="U$8" pad="30"/>
 <wire x1="16.906875" y1="11.58875" x2="16.51" y2="11.58875" width="0.2032" layer="1"/>
 <wire x1="16.51" y1="11.58875" x2="15.64625" y2="10.725" width="0.2032" layer="1"/>
@@ -2883,14 +2879,14 @@ design rules under a new name.</descript
 <signal name="SW-D">
 <contactref element="SW1" pad="6"/>
 <via x="37.30625" y="9.921875" extent="1-16" drill="0.3048"/>
-<wire x1="19.52625" y1="10.795" x2="32.305625" y2="10.795" width="0.2032" layer="16"/>
-<wire x1="19.52625" y1="10.795" x2="19.3675" y2="10.95375" width="0.2032" layer="16"/>
-<wire x1="19.3675" y1="10.95375" x2="17.4625" y2="10.95375" width="0.2032" layer="16"/>
+<wire x1="19.3675" y1="10.795" x2="31.4325" y2="10.795" width="0.2032" layer="16"/>
+<wire x1="19.3675" y1="10.795" x2="19.20875" y2="10.95375" width="0.2032" layer="16"/>
+<wire x1="19.20875" y1="10.95375" x2="17.4625" y2="10.95375" width="0.2032" layer="16"/>
 <via x="17.4625" y="10.95375" extent="1-16" drill="0.3048"/>
 <wire x1="38.266078125" y1="10.886178125" x2="38.266078125" y2="10.881703125" width="0.2032" layer="1"/>
 <wire x1="38.266078125" y1="10.881703125" x2="37.30625" y2="9.921875" width="0.2032" layer="1"/>
-<wire x1="32.305625" y1="10.795" x2="33.17875" y2="9.921875" width="0.2032" layer="16"/>
-<wire x1="33.17875" y1="9.921875" x2="37.30625" y2="9.921875" width="0.2032" layer="16"/>
+<wire x1="31.4325" y1="10.795" x2="32.305625" y2="9.921875" width="0.2032" layer="16"/>
+<wire x1="32.305625" y1="9.921875" x2="37.30625" y2="9.921875" width="0.2032" layer="16"/>
 <contactref element="U$8" pad="29"/>
 <wire x1="14.73625" y1="9.925" x2="15.64" y2="9.925" width="0.2032" layer="1"/>
 <wire x1="17.4625" y1="10.95375" x2="16.66875" y2="10.95375" width="0.2032" layer="1"/>
@@ -2913,13 +2909,12 @@ design rules under a new name.</descript
 <wire x1="20.875625" y1="5.400625" x2="20.875625" y2="5.794375" width="0.2032" layer="16"/>
 <wire x1="20.875625" y1="5.794375" x2="20.558125" y2="6.111875" width="0.2032" layer="16"/>
 <wire x1="20.558125" y1="6.111875" x2="18.89125" y2="6.111875" width="0.2032" layer="16"/>
-<wire x1="18.89125" y1="6.111875" x2="17.859375" y2="7.14375" width="0.2032" layer="16"/>
-<wire x1="17.859375" y1="7.14375" x2="12.620625" y2="7.14375" width="0.2032" layer="16"/>
+<wire x1="18.89125" y1="6.111875" x2="17.541875" y2="7.46125" width="0.2032" layer="16"/>
+<wire x1="17.541875" y1="7.46125" x2="12.303125" y2="7.46125" width="0.2032" layer="16"/>
 <wire x1="11.826875" y1="5.434375" x2="11.826875" y2="7.9375" width="0.2032" layer="1"/>
-<wire x1="12.620625" y1="7.14375" x2="11.826875" y2="7.9375" width="0.2032" layer="16"/>
-<wire x1="36.67125" y1="6.429375" x2="32.86125" y2="6.429375" width="0.2032" layer="16"/>
-<wire x1="32.86125" y1="6.429375" x2="32.22625" y2="7.064375" width="0.2032" layer="16"/>
-<wire x1="32.22625" y1="7.064375" x2="24.765" y2="7.064375" width="0.2032" layer="16"/>
+<wire x1="12.303125" y1="7.46125" x2="11.826875" y2="7.9375" width="0.2032" layer="16"/>
+<wire x1="36.67125" y1="6.429375" x2="25.4" y2="6.429375" width="0.2032" layer="16"/>
+<wire x1="25.4" y1="6.429375" x2="24.765" y2="7.064375" width="0.2032" layer="16"/>
 <wire x1="20.875625" y1="5.400625" x2="22.545625" y2="5.400625" width="0.2032" layer="1"/>
 <wire x1="22.545625" y1="5.400625" x2="24.209375" y2="7.064375" width="0.2032" layer="1"/>
 <wire x1="24.209375" y1="7.064375" x2="24.765" y2="7.064375" width="0.2032" layer="1"/>
@@ -2929,32 +2924,27 @@ design rules under a new name.</descript
 <contactref element="J1" pad="6"/>
 <via x="16.98625" y="6.35" extent="1-16" drill="0.3048"/>
 <via x="39.6875" y="8.89" extent="1-16" drill="0.3048"/>
-<wire x1="24.844375" y1="6.270625" x2="24.28875" y2="6.270625" width="0.2032" layer="16"/>
 <via x="24.28875" y="6.270625" extent="1-16" drill="0.3048"/>
 <wire x1="22.5425" y1="4.524375" x2="24.28875" y2="6.270625" width="0.2032" layer="1"/>
 <wire x1="39.6875" y1="8.89" x2="41.15" y2="8.89" width="0.2032" layer="1"/>
 <wire x1="41.15" y1="8.89" x2="41.165" y2="8.875" width="0.2032" layer="1"/>
 <wire x1="36.83" y1="6.0325" x2="39.6875" y2="8.89" width="0.2032" layer="16"/>
 <contactref element="U$8" pad="21"/>
-<wire x1="17.145" y1="6.19125" x2="16.98625" y2="6.35" width="0.2032" layer="1"/>
-<wire x1="19.605625" y1="4.683125" x2="19.605625" y2="5.48730625" width="0.2032" layer="16"/>
-<wire x1="19.605625" y1="5.48730625" x2="19.491846875" y2="5.601084375" width="0.2032" layer="16"/>
-<wire x1="19.491846875" y1="5.601084375" x2="18.846415625" y2="5.601084375" width="0.2032" layer="16"/>
-<wire x1="18.846415625" y1="5.601084375" x2="17.78" y2="6.6675" width="0.2032" layer="16"/>
-<wire x1="13.97" y1="6.6675" x2="12.85875" y2="5.55625" width="0.2032" layer="16"/>
-<wire x1="12.85875" y1="5.55625" x2="12.54125" y2="5.55625" width="0.2032" layer="16"/>
-<wire x1="12.54125" y1="5.55625" x2="11.033125" y2="7.223125" width="0.2032" layer="16"/>
+<wire x1="19.446875" y1="5.000625" x2="17.383125" y2="7.064375" width="0.2032" layer="16"/>
+<wire x1="11.191875" y1="7.064375" x2="11.033125" y2="7.223125" width="0.2032" layer="16"/>
 <via x="11.033125" y="7.223125" extent="1-16" drill="0.3048"/>
 <wire x1="11.03625" y1="5.425" x2="11.03625" y2="7.0675" width="0.2032" layer="1"/>
 <wire x1="11.03625" y1="7.0675" x2="11.033125" y2="7.223125" width="0.2032" layer="1"/>
-<wire x1="13.97" y1="6.6675" x2="17.30375" y2="6.6675" width="0.2032" layer="16"/>
-<wire x1="17.78" y1="6.6675" x2="17.30375" y2="6.6675" width="0.2032" layer="16"/>
-<wire x1="17.30375" y1="6.6675" x2="16.98625" y2="6.35" width="0.2032" layer="16"/>
-<wire x1="36.83" y1="6.0325" x2="25.0825" y2="6.0325" width="0.2032" layer="16"/>
-<wire x1="25.0825" y1="6.0325" x2="24.844375" y2="6.270625" width="0.2032" layer="16"/>
-<wire x1="16.98625" y1="6.35" x2="18.0975" y2="6.35" width="0.2032" layer="1"/>
-<wire x1="18.0975" y1="6.35" x2="19.923125" y2="4.524375" width="0.2032" layer="1"/>
-<wire x1="19.923125" y1="4.524375" x2="22.5425" y2="4.524375" width="0.2032" layer="1"/>
+<wire x1="11.191875" y1="7.064375" x2="16.8275" y2="7.064375" width="0.2032" layer="16"/>
+<wire x1="16.8275" y1="7.064375" x2="17.383125" y2="7.064375" width="0.2032" layer="16"/>
+<wire x1="36.83" y1="6.0325" x2="24.526875" y2="6.0325" width="0.2032" layer="16"/>
+<wire x1="24.526875" y1="6.0325" x2="24.28875" y2="6.270625" width="0.2032" layer="16"/>
+<wire x1="16.98625" y1="6.35" x2="18.57375" y2="6.35" width="0.2032" layer="1"/>
+<wire x1="18.57375" y1="6.35" x2="20.399375" y2="4.524375" width="0.2032" layer="1"/>
+<wire x1="20.399375" y1="4.524375" x2="22.5425" y2="4.524375" width="0.2032" layer="1"/>
+<wire x1="16.98625" y1="6.35" x2="16.98625" y2="6.905625" width="0.2032" layer="16"/>
+<wire x1="16.98625" y1="6.905625" x2="16.8275" y2="7.064375" width="0.2032" layer="16"/>
+<wire x1="19.605625" y1="4.683125" x2="19.446875" y2="5.000625" width="0.2032" layer="16"/>
 </signal>
 <signal name="VUSB">
 <contactref element="J2" pad="VBUS"/>
@@ -2970,21 +2960,20 @@ design rules under a new name.</descript
 <wire x1="39.84625" y1="4.28625" x2="41.11625" y2="5.55625" width="0.2032" layer="16"/>
 <wire x1="42.38625" y1="14.035" x2="42.38625" y2="8.255" width="0.2032" layer="1"/>
 <wire x1="42.35625" y1="8.225" x2="42.38625" y2="8.255" width="0.2032" layer="1"/>
-<wire x1="39.84625" y1="4.28625" x2="28.41625" y2="4.28625" width="0.2032" layer="16"/>
-<wire x1="28.019375" y1="4.683125" x2="25.955625" y2="4.683125" width="0.2032" layer="16"/>
+<wire x1="39.84625" y1="4.28625" x2="26.3525" y2="4.28625" width="0.2032" layer="16"/>
 <wire x1="42.38625" y1="8.255" x2="42.38625" y2="6.82625" width="0.2032" layer="1"/>
 <wire x1="42.38625" y1="6.82625" x2="41.11625" y2="5.55625" width="0.2032" layer="1"/>
-<wire x1="28.41625" y1="4.28625" x2="28.019375" y2="4.683125" width="0.2032" layer="16"/>
+<wire x1="26.3525" y1="4.28625" x2="25.955625" y2="4.683125" width="0.2032" layer="16"/>
 </signal>
 <signal name="SSR+">
 <contactref element="JP3" pad="P1"/>
 <contactref element="U$8" pad="7"/>
-<wire x1="8.63625" y1="13.625" x2="8.63625" y2="12.16" width="0.2032" layer="1"/>
-<wire x1="8.63625" y1="12.16" x2="8.969375" y2="11.826875" width="0.2032" layer="1"/>
+<wire x1="8.63625" y1="13.625" x2="8.63625" y2="12.41231875" width="0.2032" layer="1"/>
+<wire x1="8.63625" y1="12.41231875" x2="9.22169375" y2="11.826875" width="0.2032" layer="1"/>
+<wire x1="9.22169375" y1="11.826875" x2="11.668125" y2="11.826875" width="0.2032" layer="1"/>
 <via x="11.90625" y="12.065" extent="1-16" drill="0.3048"/>
 <wire x1="15.875" y1="13.97" x2="14.12875" y2="13.97" width="0.2032" layer="16"/>
 <wire x1="14.12875" y1="13.97" x2="11.90625" y2="12.065" width="0.2032" layer="16"/>
-<wire x1="8.969375" y1="11.826875" x2="11.668125" y2="11.826875" width="0.2032" layer="1"/>
 <wire x1="11.668125" y1="11.826875" x2="11.90625" y2="12.065" width="0.2032" layer="1"/>
 </signal>
 <signal name="N$23">
@@ -2995,10 +2984,10 @@ design rules under a new name.</descript
 </signal>
 <signal name="LED_PWR">
 <contactref element="R1" pad="1"/>
-<wire x1="19.20875" y1="12.22375" x2="19.84375" y2="11.58875" width="0.2032" layer="16"/>
-<wire x1="19.84375" y1="11.58875" x2="32.385" y2="11.58875" width="0.2032" layer="16"/>
+<wire x1="19.05" y1="12.22375" x2="19.685" y2="11.58875" width="0.2032" layer="16"/>
+<wire x1="19.685" y1="11.58875" x2="32.385" y2="11.58875" width="0.2032" layer="16"/>
 <via x="41.195625" y="12.85875" extent="1-16" drill="0.3048"/>
-<wire x1="19.20875" y1="12.22375" x2="16.271875" y2="12.22375" width="0.2032" layer="16"/>
+<wire x1="19.05" y1="12.22375" x2="16.271875" y2="12.22375" width="0.2032" layer="16"/>
 <via x="16.271875" y="12.22375" extent="1-16" drill="0.3048"/>
 <wire x1="40.005" y1="13.0025" x2="40.02" y2="13.0175" width="0.2032" layer="1"/>
 <wire x1="41.195625" y1="12.85875" x2="33.9725" y2="12.85875" width="0.2032" layer="16"/>
@@ -3006,8 +2995,8 @@ design rules under a new name.</descript
 <wire x1="41.195625" y1="12.85875" x2="40.17875" y2="12.85875" width="0.2032" layer="1"/>
 <wire x1="40.17875" y1="12.85875" x2="40.02" y2="13.0175" width="0.2032" layer="1"/>
 <contactref element="U$8" pad="31"/>
+<wire x1="15.573125" y1="11.525" x2="16.271875" y2="12.22375" width="0.2032" layer="1"/>
 <wire x1="14.73625" y1="11.525" x2="15.573125" y2="11.525" width="0.2032" layer="1"/>
-<wire x1="15.573125" y1="11.525" x2="16.271875" y2="12.22375" width="0.2032" layer="1"/>
 </signal>
 <signal name="!RES">
 <via x="4.206875" y="9.445625" extent="1-16" drill="0.3048"/>
@@ -3057,11 +3046,11 @@ design rules under a new name.</descript
 <contactref element="SW1" pad="2"/>
 <wire x1="32.305625" y1="8.175625" x2="33.575625" y2="8.175625" width="0.2032" layer="16"/>
 <via x="33.575625" y="8.175625" extent="1-16" drill="0.3048"/>
-<wire x1="20.081875" y1="10.00125" x2="30.48" y2="10.00125" width="0.2032" layer="16"/>
+<wire x1="19.605625" y1="10.00125" x2="30.48" y2="10.00125" width="0.2032" layer="16"/>
 <wire x1="30.48" y1="10.00125" x2="32.305625" y2="8.175625" width="0.2032" layer="16"/>
 <wire x1="33.575625" y1="8.175625" x2="32.57386875" y2="7.17386875" width="0.2032" layer="1"/>
-<wire x1="20.081875" y1="10.00125" x2="19.685" y2="9.604375" width="0.2032" layer="16"/>
-<wire x1="19.685" y1="9.604375" x2="18.57375" y2="9.604375" width="0.2032" layer="16"/>
+<wire x1="19.605625" y1="10.00125" x2="19.20875" y2="9.604375" width="0.2032" layer="16"/>
+<wire x1="19.20875" y1="9.604375" x2="18.57375" y2="9.604375" width="0.2032" layer="16"/>
 <via x="18.57375" y="9.604375" extent="1-16" drill="0.3048"/>
 <contactref element="U$8" pad="27"/>
 <wire x1="14.73625" y1="8.325" x2="15.6275" y2="8.325" width="0.2032" layer="1"/>
@@ -3085,44 +3074,37 @@ design rules under a new name.</descript
 <contactref element="U3" pad="7"/>
 <wire x1="28.09875" y1="5.306875" x2="28.09875" y2="8.651875" width="0.2032" layer="1"/>
 <via x="28.09875" y="8.651875" extent="1-16" drill="0.3048"/>
-<wire x1="25.796875" y1="8.810625" x2="21.11375" y2="8.810625" width="0.2032" layer="16"/>
+<wire x1="25.796875" y1="8.810625" x2="21.034375" y2="8.810625" width="0.2032" layer="16"/>
 <wire x1="25.796875" y1="8.810625" x2="26.590625" y2="8.016875" width="0.2032" layer="16"/>
 <wire x1="26.590625" y1="8.016875" x2="27.46375" y2="8.016875" width="0.2032" layer="16"/>
 <wire x1="27.46375" y1="8.016875" x2="28.09875" y2="8.651875" width="0.2032" layer="16"/>
 <contactref element="U$8" pad="12"/>
-<via x="12.3825" y="9.921875" extent="1-16" drill="0.3048"/>
-<wire x1="6.53625" y1="9.925" x2="11.744375" y2="9.925" width="0.2032" layer="1"/>
-<wire x1="11.744375" y1="9.925" x2="12.3825" y2="9.921875" width="0.2032" layer="1"/>
-<wire x1="19.52625" y1="7.699375" x2="17.30375" y2="9.921875" width="0.2032" layer="16"/>
-<wire x1="17.30375" y1="9.921875" x2="12.3825" y2="9.921875" width="0.2032" layer="16"/>
+<via x="12.303125" y="10.080625" extent="1-16" drill="0.3048"/>
+<wire x1="6.53625" y1="9.925" x2="6.981875" y2="10.08375" width="0.2032" layer="1"/>
+<wire x1="6.981875" y1="10.08375" x2="12.303125" y2="10.080625" width="0.2032" layer="1"/>
+<wire x1="19.52625" y1="7.699375" x2="17.145" y2="10.080625" width="0.2032" layer="16"/>
+<wire x1="17.145" y1="10.080625" x2="12.303125" y2="10.080625" width="0.2032" layer="16"/>
 <wire x1="19.52625" y1="7.699375" x2="19.923125" y2="7.699375" width="0.2032" layer="16"/>
-<wire x1="19.923125" y1="7.699375" x2="20.16125" y2="7.9375" width="0.2032" layer="16"/>
-<wire x1="20.16125" y1="7.9375" x2="20.240625" y2="7.9375" width="0.2032" layer="16"/>
-<wire x1="20.240625" y1="7.9375" x2="21.11375" y2="8.810625" width="0.2032" layer="16"/>
+<wire x1="19.923125" y1="7.699375" x2="21.034375" y2="8.810625" width="0.2032" layer="16"/>
 </signal>
 <signal name="SPI_SCK">
 <contactref element="LCD1" pad="11"/>
 <contactref element="U3" pad="5"/>
 <via x="25.479375" y="8.175625" extent="1-16" drill="0.3048"/>
-<wire x1="21.2725" y1="8.41375" x2="24.92375" y2="8.41375" width="0.2032" layer="16"/>
-<wire x1="24.92375" y1="8.41375" x2="25.479375" y2="8.175625" width="0.2032" layer="16"/>
-<wire x1="11.668125" y1="8.651875" x2="11.668125" y2="9.2075" width="0.2032" layer="16"/>
+<wire x1="21.193125" y1="8.41375" x2="25.24125" y2="8.41375" width="0.2032" layer="16"/>
+<wire x1="25.24125" y1="8.41375" x2="25.479375" y2="8.175625" width="0.2032" layer="16"/>
+<wire x1="11.668125" y1="8.810625" x2="11.668125" y2="9.36625" width="0.2032" layer="16"/>
 <contactref element="U$8" pad="11"/>
-<via x="12.3825" y="10.795" extent="1-16" drill="0.3048"/>
-<wire x1="11.668125" y1="9.2075" x2="11.668125" y2="10.080625" width="0.2032" layer="16"/>
-<wire x1="6.53625" y1="10.725" x2="11.0425" y2="10.725" width="0.2032" layer="1"/>
-<wire x1="11.668125" y1="10.080625" x2="12.3825" y2="10.795" width="0.2032" layer="16"/>
-<wire x1="11.0425" y1="10.725" x2="12.3825" y2="10.795" width="0.2032" layer="1"/>
-<wire x1="19.3675" y1="7.3025" x2="17.145" y2="9.525" width="0.2032" layer="16"/>
-<wire x1="8.335" y1="7.41625" x2="10.4325" y2="7.41625" width="0.2032" layer="16"/>
-<wire x1="17.145" y1="9.525" x2="13.096875" y2="9.525" width="0.2032" layer="16"/>
-<wire x1="13.096875" y1="9.525" x2="12.779375" y2="9.2075" width="0.2032" layer="16"/>
-<wire x1="12.779375" y1="9.2075" x2="11.668125" y2="9.2075" width="0.2032" layer="16"/>
+<via x="11.668125" y="10.795" extent="1-16" drill="0.3048"/>
+<wire x1="11.668125" y1="9.36625" x2="11.668125" y2="10.795" width="0.2032" layer="16"/>
+<wire x1="6.53625" y1="10.725" x2="11.51875" y2="10.725" width="0.2032" layer="1"/>
+<wire x1="11.51875" y1="10.725" x2="11.668125" y2="10.795" width="0.2032" layer="1"/>
+<wire x1="19.3675" y1="7.3025" x2="17.30375" y2="9.36625" width="0.2032" layer="16"/>
+<wire x1="8.335" y1="7.41625" x2="10.27375" y2="7.41625" width="0.2032" layer="16"/>
+<wire x1="17.30375" y1="9.36625" x2="11.668125" y2="9.36625" width="0.2032" layer="16"/>
 <wire x1="19.3675" y1="7.3025" x2="20.081875" y2="7.3025" width="0.2032" layer="16"/>
-<wire x1="20.081875" y1="7.3025" x2="20.32" y2="7.540625" width="0.2032" layer="16"/>
-<wire x1="20.32" y1="7.540625" x2="20.399375" y2="7.540625" width="0.2032" layer="16"/>
-<wire x1="20.399375" y1="7.540625" x2="21.2725" y2="8.41375" width="0.2032" layer="16"/>
-<wire x1="10.4325" y1="7.41625" x2="11.668125" y2="8.651875" width="0.2032" layer="16"/>
+<wire x1="20.081875" y1="7.3025" x2="21.193125" y2="8.41375" width="0.2032" layer="16"/>
+<wire x1="10.27375" y1="7.41625" x2="11.668125" y2="8.810625" width="0.2032" layer="16"/>
 <wire x1="25.479375" y1="8.175625" x2="25.479375" y2="5.38625" width="0.2032" layer="1"/>
 <wire x1="25.479375" y1="5.38625" x2="25.55875" y2="5.306875" width="0.2032" layer="1"/>
 </signal>
@@ -3132,22 +3114,21 @@ design rules under a new name.</descript
 <wire x1="7.83625" y1="13.625" x2="7.83625" y2="12.325" width="0.2032" layer="1"/>
 <wire x1="7.83625" y1="12.325" x2="8.73125" y2="11.43" width="0.2032" layer="1"/>
 <wire x1="8.73125" y1="11.43" x2="12.54125" y2="11.43" width="0.2032" layer="1"/>
-<wire x1="12.54125" y1="11.43" x2="13.17625" y2="10.795" width="0.2032" layer="1"/>
-<wire x1="13.17625" y1="10.795" x2="13.17625" y2="9.763125" width="0.2032" layer="1"/>
-<wire x1="13.17625" y1="9.763125" x2="12.7" y2="9.286875" width="0.2032" layer="1"/>
-<wire x1="12.7" y1="9.286875" x2="10.00125" y2="9.286875" width="0.2032" layer="1"/>
+<wire x1="12.54125" y1="11.43" x2="13.0175" y2="10.95375" width="0.2032" layer="1"/>
+<wire x1="13.0175" y1="10.95375" x2="13.0175" y2="9.763125" width="0.2032" layer="1"/>
+<wire x1="13.0175" y1="9.763125" x2="12.54125" y2="9.286875" width="0.2032" layer="1"/>
+<wire x1="12.54125" y1="9.286875" x2="10.00125" y2="9.286875" width="0.2032" layer="1"/>
 <wire x1="8.335" y1="9.36625" x2="9.286875" y2="9.36625" width="0.2032" layer="16"/>
 <wire x1="9.286875" y1="9.36625" x2="10.00125" y2="9.286875" width="0.2032" layer="16"/>
 <via x="10.00125" y="9.286875" extent="1-16" drill="0.3048"/>
 </signal>
 <signal name="!CS_MAX">
 <contactref element="U3" pad="6"/>
-<wire x1="20.081875" y1="8.334375" x2="20.955" y2="9.2075" width="0.2032" layer="16"/>
+<wire x1="19.764375" y1="8.334375" x2="20.6375" y2="9.2075" width="0.2032" layer="16"/>
 <via x="26.82875" y="8.651875" extent="1-16" drill="0.3048"/>
 <wire x1="26.82875" y1="8.651875" x2="26.82875" y2="5.306875" width="0.2032" layer="1"/>
-<wire x1="20.081875" y1="8.334375" x2="19.764375" y2="8.334375" width="0.2032" layer="16"/>
 <via x="19.764375" y="8.334375" extent="1-16" drill="0.3048"/>
-<wire x1="20.955" y1="9.2075" x2="26.273125" y2="9.2075" width="0.2032" layer="16"/>
+<wire x1="20.6375" y1="9.2075" x2="26.273125" y2="9.2075" width="0.2032" layer="16"/>
 <wire x1="26.273125" y1="9.2075" x2="26.82875" y2="8.651875" width="0.2032" layer="16"/>
 <contactref element="U$8" pad="25"/>
 <wire x1="14.73625" y1="6.725" x2="15.615" y2="6.725" width="0.2032" layer="1"/>
@@ -3169,41 +3150,37 @@ design rules under a new name.</descript
 <wire x1="10.23625" y1="5.425" x2="10.23625" y2="6.664375" width="0.2032" layer="1"/>
 <wire x1="10.23625" y1="6.664375" x2="10.239375" y2="6.6675" width="0.2032" layer="1"/>
 <via x="10.239375" y="6.6675" extent="1-16" drill="0.3048"/>
-<wire x1="10.239375" y1="6.6675" x2="10.239375" y2="5.55625" width="0.2032" layer="16"/>
-<wire x1="10.239375" y1="5.55625" x2="10.795" y2="5.000625" width="0.2032" layer="16"/>
-<wire x1="10.795" y1="5.000625" x2="12.85875" y2="5.000625" width="0.2032" layer="16"/>
-<wire x1="12.85875" y1="5.000625" x2="14.049375" y2="6.19125" width="0.2032" layer="16"/>
-<wire x1="14.049375" y1="6.19125" x2="15.954375" y2="6.19125" width="0.2032" layer="16"/>
-<wire x1="15.954375" y1="6.19125" x2="16.271875" y2="5.87375" width="0.2032" layer="16"/>
-<wire x1="16.271875" y1="5.87375" x2="16.271875" y2="5.000625" width="0.2032" layer="16"/>
 <wire x1="16.271875" y1="5.000625" x2="16.430625" y2="4.841875" width="0.2032" layer="16"/>
 <wire x1="16.430625" y1="4.841875" x2="17.541875" y2="4.841875" width="0.2032" layer="16"/>
+<wire x1="16.271875" y1="5.000625" x2="16.271875" y2="6.270625" width="0.2032" layer="16"/>
+<wire x1="10.239375" y1="6.6675" x2="10.398125" y2="6.50875" width="0.2032" layer="16"/>
+<wire x1="10.398125" y1="6.50875" x2="16.03375" y2="6.50875" width="0.2032" layer="16"/>
+<wire x1="16.03375" y1="6.50875" x2="16.271875" y2="6.270625" width="0.2032" layer="16"/>
 </signal>
 <signal name="SWCLK">
 <contactref element="J1" pad="3"/>
 <contactref element="U$8" pad="24"/>
-<via x="13.414375" y="8.73125" extent="1-16" drill="0.3048"/>
-<wire x1="13.414375" y1="8.73125" x2="13.414375" y2="5.446875" width="0.2032" layer="1"/>
+<via x="13.414375" y="8.5725" extent="1-16" drill="0.3048"/>
+<wire x1="13.414375" y1="8.5725" x2="13.414375" y2="5.446875" width="0.2032" layer="1"/>
 <wire x1="13.414375" y1="5.446875" x2="13.43625" y2="5.425" width="0.2032" layer="1"/>
 <wire x1="23.415625" y1="4.683125" x2="23.415625" y2="5.3975" width="0.2032" layer="16"/>
 <wire x1="23.415625" y1="5.3975" x2="21.9075" y2="6.905625" width="0.2032" layer="16"/>
 <wire x1="21.9075" y1="6.905625" x2="19.20875" y2="6.905625" width="0.2032" layer="16"/>
-<wire x1="19.20875" y1="6.905625" x2="18.176875" y2="7.9375" width="0.2032" layer="16"/>
-<wire x1="18.176875" y1="7.9375" x2="14.208125" y2="7.9375" width="0.2032" layer="16"/>
-<wire x1="14.208125" y1="7.9375" x2="13.414375" y2="8.73125" width="0.2032" layer="16"/>
+<wire x1="19.20875" y1="6.905625" x2="17.541875" y2="8.5725" width="0.2032" layer="16"/>
+<wire x1="17.541875" y1="8.5725" x2="13.414375" y2="8.5725" width="0.2032" layer="16"/>
 </signal>
 <signal name="SWDIO">
 <contactref element="J1" pad="4"/>
 <contactref element="U$8" pad="23"/>
-<via x="12.620625" y="8.175625" extent="1-16" drill="0.3048"/>
+<via x="12.620625" y="8.255" extent="1-16" drill="0.3048"/>
 <wire x1="12.620625" y1="5.440625" x2="12.63625" y2="5.425" width="0.2032" layer="1"/>
 <wire x1="22.145625" y1="4.683125" x2="22.145625" y2="6.0325" width="0.2032" layer="16"/>
 <wire x1="22.145625" y1="6.0325" x2="21.669375" y2="6.50875" width="0.2032" layer="16"/>
 <wire x1="21.669375" y1="6.50875" x2="19.05" y2="6.50875" width="0.2032" layer="16"/>
-<wire x1="19.05" y1="6.50875" x2="18.018125" y2="7.540625" width="0.2032" layer="16"/>
-<wire x1="18.018125" y1="7.540625" x2="13.255625" y2="7.540625" width="0.2032" layer="16"/>
-<wire x1="12.620625" y1="5.440625" x2="12.620625" y2="8.175625" width="0.2032" layer="1"/>
-<wire x1="13.255625" y1="7.540625" x2="12.620625" y2="8.175625" width="0.2032" layer="16"/>
+<wire x1="19.05" y1="6.50875" x2="17.700625" y2="7.858125" width="0.2032" layer="16"/>
+<wire x1="17.700625" y1="7.858125" x2="13.0175" y2="7.858125" width="0.2032" layer="16"/>
+<wire x1="12.620625" y1="5.440625" x2="12.620625" y2="8.255" width="0.2032" layer="1"/>
+<wire x1="13.0175" y1="7.858125" x2="12.620625" y2="8.255" width="0.2032" layer="16"/>
 </signal>
 </signals>
 </board>