therm-hardware Changeset - 376739ea0741 · protofusion repositories

Changeset - 376739ea0741

Parent rev.

Child rev.

[Not reviewed]

package-lqfp32

0 2 0

Ethan Zonca - 9 years ago 2015-12-19 22:56:49
ez@ethanzonca.com

Renumber

2 files changed with 167 insertions and 161 deletions:

zoncoffee.brd

zoncoffee.sch

131

125

0 comments (0 inline, 0 general)

zoncoffee.brd

➞

Show inline comments

@@ @@ -2528,18 +2528,18 @@ design rules under a new name.</descript @@
 </pass>
 </autorouter>
 <elements>
 <element name="SW1" library="dp_devices" package="JOYSTICK_SF303GJ26-3" value="JOYSTICK_SF303GJ26-3" x="34.925" y="9.525" smashed="yes" rot="R45">
 <attribute name="NAME" x="35.44119375" y="12.29685625" size="0.8128" layer="25" ratio="16" rot="R315"/>
 </element>
-<element name="J2" library="SparkFun-Connectors" package="USB-MICROB" value="USB-MICROB" x="43.815" y="9.525" smashed="yes" rot="R90">
+<element name="JP1" library="SparkFun-Connectors" package="USB-MICROB" value="USB-MICROB" x="43.815" y="9.525" smashed="yes" rot="R90">
 <attribute name="PROD_ID" value="CONN-09505" x="78.105" y="37.465" size="1.778" layer="27" rot="R90" display="off"/>
 <attribute name="NAME" x="44.165" y="8.956875" size="0.8128" layer="25" ratio="16" rot="R90"/>
 <attribute name="VALUE" x="46.99" y="7.62" size="0.762" layer="27" rot="R90"/>
 </element>
-<element name="U3" library="dp_devices" package="SO-8" value="IC_MAX31855-SO-8" x="27.46375" y="8.016875" smashed="yes" rot="R180">
+<element name="IC1" library="dp_devices" package="SO-8" value="IC_MAX31855-SO-8" x="27.46375" y="8.016875" smashed="yes" rot="R180">
 <attribute name="NAME" x="31.035625" y="6.19125" size="0.8128" layer="25" font="vector" ratio="16" rot="R90"/>
 </element>
 <element name="U2" library="SparkFun-PowerIC" package="SOT23-5" value="AP2210K-3.3" x="21.59" y="9.2075" smashed="yes" rot="R180">
 <attribute name="PROD_ID" value="VREG-00822" x="-13.97" y="42.2275" size="1.778" layer="27" rot="R180" display="off"/>
 <attribute name="NAME" x="20.066" y="7.20725" size="0.8128" layer="25" ratio="16" rot="R90"/>
 <attribute name="VALUE" x="22.5425" y="9.398" size="0.4064" layer="27" rot="R180"/>
@@ @@ -2564,13 +2564,13 @@ design rules under a new name.</descript @@
 <attribute name="VALUE" x="20.5105" y="5.207" size="0.4064" layer="27"/>
 </element>
 <element name="R1" library="SparkFun-Passives" package="0402-RES" value="" x="39.37" y="13.0175" smashed="yes" rot="R180">
 <attribute name="NAME" x="40.894" y="12.319" size="0.8128" layer="25" ratio="16" rot="R180"/>
 <attribute name="VALUE" x="40.4495" y="14.1605" size="0.4064" layer="27" rot="R180"/>
 </element>
-<element name="C8" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="23.97125" y="9.445625" smashed="yes" rot="R90">
+<element name="C10" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="23.97125" y="9.445625" smashed="yes" rot="R90">
 <attribute name="NAME" x="23.5585" y="12.080875" size="0.8128" layer="25" ratio="16" rot="R270"/>
 <attribute name="VALUE" x="25.11425" y="8.366125" size="0.4064" layer="27" rot="R90"/>
 </element>
 <element name="LCD1" library="microbuilder" package="UG-2832HSWEG04_WRAPAROUND" value="SSD1306-SPI" x="0.635" y="9.525" smashed="yes" rot="R180">
 <attribute name="VALUE" x="30.635" y="17.025" size="0.4064" layer="27" ratio="10" rot="R180"/>
 </element>
@@ @@ -2588,34 +2588,34 @@ design rules under a new name.</descript @@
 <attribute name="VALUE" x="5.68325" y="6.223" size="0.4064" layer="27" rot="R180"/>
 </element>
 <element name="CA1" library="Protofusion" package="1206-ARV-4" value="1uF" x="1.5875" y="9.525" smashed="yes" rot="R270">
 <attribute name="NAME" x="3.571875" y="10.63625" size="0.8128" layer="25" ratio="16" rot="R270"/>
 <attribute name="VALUE" x="-0.9525" y="11.1125" size="1.27" layer="27" rot="R270"/>
 </element>
 <element name="C9" library="SparkFun-Passives" package="0402-CAP" value="2.2uF" x="1.5875" y="13.6525" rot="R180"/>
 <element name="R3" library="SparkFun-Passives" package="0402-RES" value="390k" x="1.5875" y="6.985"/>
 <element name="C4" library="SparkFun-Passives" package="0402-CAP" value="2.2uF" x="1.5875" y="13.6525" rot="R180"/>
 <element name="R2" library="SparkFun-Passives" package="0402-RES" value="390k" x="1.5875" y="6.985"/>
 <element name="C3" library="SparkFun-Passives" package="0402-CAP" value="2.2uF" x="1.5875" y="12.065"/>
 <element name="U$6" library="Protofusion" package="THERM_LOGO_SMALL_0.2" value="" x="36.195" y="3.96875"/>
-<element name="C4" library="SparkFun-Passives" package="0402-CAP" value="0.01uF" x="27.46375" y="12.303125" rot="R180"/>
+<element name="C9" library="SparkFun-Passives" package="0402-CAP" value="0.01uF" x="27.46375" y="12.303125" rot="R180"/>
 <element name="U1" library="Protofusion" package="LQFP32" value="STM32F042K-T" x="10.63625" y="9.525" smashed="yes" rot="R270"/>
 <element name="J1" library="Protofusion" package="POGOPROG-CONN-4-ALLSMT" value="POGOPIN-CONN-4" x="23.1775" y="4.7625" rot="MR90"/>
 <element name="R2" library="SparkFun-Passives" package="0402-RES" value="" x="12.7" y="5.08" rot="MR90"/>
 <element name="C10" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="11.43" y="5.08" rot="MR90"/>
 <element name="JP1" library="SparkFun-Connectors" package="1X02_2.54_SCREWTERM" value="1546215-2" x="14.9225" y="5.08" rot="MR180"/>
 <element name="R3" library="SparkFun-Passives" package="0402-RES" value="" x="12.7" y="5.08" rot="MR90"/>
 <element name="C8" library="SparkFun-Passives" package="0402-CAP" value="0.1uF" x="11.43" y="5.08" rot="MR90"/>
 <element name="JP5" library="SparkFun-Connectors" package="1X02_2.54_SCREWTERM" value="1546215-2" x="14.9225" y="5.08" rot="MR180"/>
 </elements>
 <signals>
 <signal name="GND">
 <contactref element="JP2" pad="P2"/>
 <contactref element="U2" pad="2"/>
 <contactref element="SW1" pad="5"/>
 <contactref element="J2" pad="GND"/>
 <contactref element="J2" pad="MT1"/>
 <contactref element="J2" pad="MT2"/>
 <contactref element="JP1" pad="GND"/>
 <contactref element="JP1" pad="MT1"/>
 <contactref element="JP1" pad="MT2"/>
 <contactref element="JP3" pad="P2"/>
 <contactref element="LED1" pad="C"/>
-<contactref element="C8" pad="1"/>
+<contactref element="C10" pad="1"/>
 <contactref element="C5" pad="1"/>
 <contactref element="C7" pad="2"/>
 <polygon width="0.254" layer="16" isolate="0.2032">
 <vertex x="0" y="3.81"/>
 <vertex x="45.085" y="3.81"/>
 <vertex x="45.085" y="15.24"/>
@@ @@ -2648,16 +2648,16 @@ design rules under a new name.</descript @@
 <wire x1="43.84625" y1="13.49375" x2="43.815" y2="13.525" width="0.2032" layer="1"/>
 <via x="42.38625" y="5.635625" extent="1-16" drill="0.3048"/>
 <via x="44.370625" y="13.97" extent="1-16" drill="0.3048"/>
 <wire x1="43.97375" y1="13.49375" x2="43.97375" y2="13.573125" width="0.2032" layer="1"/>
 <wire x1="43.97375" y1="13.573125" x2="44.370625" y2="13.97" width="0.2032" layer="1"/>
 <wire x1="43.815" y1="5.525" x2="43.84625" y2="5.525" width="0.2032" layer="1"/>
-<contactref element="R3" pad="1"/>
+<contactref element="R2" pad="1"/>
 <via x="0.873125" y="6.0325" extent="1-16" drill="0.3048"/>
 <wire x1="0.873125" y1="6.0325" x2="0.873125" y2="7.049375" width="0.2032" layer="1"/>
-<contactref element="U3" pad="1"/>
+<contactref element="IC1" pad="1"/>
 <wire x1="29.36875" y1="9.36625" x2="25.24125" y2="9.36625" width="0.2032" layer="1"/>
 <wire x1="25.24125" y1="9.36625" x2="24.670625" y2="8.795625" width="0.2032" layer="1"/>
 <wire x1="23.97125" y1="8.795625" x2="24.670625" y2="8.795625" width="0.2032" layer="1"/>
 <wire x1="29.36875" y1="10.706875" x2="29.36875" y2="9.36625" width="0.2032" layer="1"/>
 <wire x1="0.8125" y1="8.325" x2="0.8125" y2="7.11" width="0.2032" layer="1"/>
 <wire x1="0.8125" y1="7.11" x2="0.9375" y2="6.985" width="0.2032" layer="1"/>
@@ @@ -2693,14 +2693,14 @@ design rules under a new name.</descript @@
 <wire x1="19.303125" y1="13.081875" x2="18.415" y2="13.97" width="0.2032" layer="1"/>
 <wire x1="21.59" y1="10.5076" x2="21.59" y2="11.215" width="0.2032" layer="1"/>
 <wire x1="21.59" y1="11.215" x2="22.519375" y2="12.144375" width="0.2032" layer="1"/>
 <wire x1="22.519375" y1="12.144375" x2="23.891875" y2="12.144375" width="0.2032" layer="1"/>
 <wire x1="23.891875" y1="12.144375" x2="24.13" y2="12.3825" width="0.2032" layer="1"/>
 <contactref element="J1" pad="2"/>
 <contactref element="R2" pad="2"/>
 <contactref element="C10" pad="2"/>
 <contactref element="R3" pad="2"/>
 <contactref element="C8" pad="2"/>
 <via x="24.28875" y="6.985" extent="1-16" drill="0.3048"/>
 <wire x1="23.97125" y1="8.795625" x2="24.27375" y2="8.795625" width="0.2032" layer="1"/>
 <wire x1="24.27375" y1="8.795625" x2="24.28875" y2="8.810625" width="0.2032" layer="1"/>
 <wire x1="24.28875" y1="8.810625" x2="24.28875" y2="6.985" width="0.2032" layer="1"/>
 <via x="16.430625" y="6.50875" extent="1-16" drill="0.3048"/>
 <wire x1="16.430625" y1="6.50875" x2="19.20875" y2="6.50875" width="0.2032" layer="1"/>
@@ @@ -2709,25 +2709,25 @@ design rules under a new name.</descript @@
 <wire x1="22.70125" y1="5.3975" x2="23.01875" y2="5.715" width="0.2032" layer="1"/>
 <wire x1="23.01875" y1="5.715" x2="23.01875" y2="6.35" width="0.2032" layer="1"/>
 </signal>
 <signal name="N$1">
 <via x="3.175" y="13.6525" extent="1-16" drill="0.3048"/>
 <contactref element="LCD1" pad="2"/>
-<contactref element="C9" pad="1"/>
+<contactref element="C4" pad="1"/>
 <wire x1="2.2375" y1="13.6525" x2="3.175" y2="13.6525" width="0.2032" layer="1"/>
 <wire x1="3.481875" y1="13.345625" x2="3.175" y2="13.6525" width="0.2032" layer="16"/>
 <wire x1="3.481875" y1="13.345625" x2="4.434375" y2="13.345625" width="0.2032" layer="16"/>
 <wire x1="8.335" y1="13.425" x2="4.51375" y2="13.425" width="0.2032" layer="16"/>
 <wire x1="4.51375" y1="13.425" x2="4.434375" y2="13.345625" width="0.2032" layer="16"/>
 </signal>
 <signal name="N$2">
 <via x="3.96875" y="13.97" extent="1-16" drill="0.3048"/>
 <contactref element="LCD1" pad="1"/>
 <wire x1="1.11125" y1="14.44625" x2="0.9525" y2="14.2875" width="0.2032" layer="1"/>
 <wire x1="0.9525" y1="14.2875" x2="0.9525" y2="13.6675" width="0.2032" layer="1"/>
-<contactref element="C9" pad="2"/>
+<contactref element="C4" pad="2"/>
 <wire x1="0.9375" y1="13.6525" x2="0.9525" y2="13.6675" width="0.2032" layer="1"/>
 <wire x1="1.11125" y1="14.44625" x2="3.4925" y2="14.44625" width="0.2032" layer="1"/>
 <wire x1="3.4925" y1="14.44625" x2="3.96875" y2="13.97" width="0.2032" layer="1"/>
 <wire x1="5.3975" y1="13.97" x2="5.5025" y2="14.075" width="0.2032" layer="16"/>
 <wire x1="8.335" y1="14.075" x2="5.5025" y2="14.075" width="0.2032" layer="16"/>
 <wire x1="5.3975" y1="13.97" x2="3.96875" y2="13.97" width="0.2032" layer="16"/>
@@ @@ -2752,13 +2752,13 @@ design rules under a new name.</descript @@
 <wire x1="3.25875" y1="12.775" x2="3.175" y2="12.85875" width="0.2032" layer="16"/>
 </signal>
 <signal name="N$8">
 <via x="3.96875" y="6.50875" extent="1-16" drill="0.3048"/>
 <contactref element="LCD1" pad="13"/>
 <wire x1="3.4925" y1="6.985" x2="3.96875" y2="6.50875" width="0.2032" layer="1"/>
-<contactref element="R3" pad="2"/>
+<contactref element="R2" pad="2"/>
 <wire x1="2.2375" y1="6.985" x2="3.4925" y2="6.985" width="0.2032" layer="1"/>
 <wire x1="8.335" y1="6.275" x2="4.2025" y2="6.275" width="0.2032" layer="16"/>
 <wire x1="4.2025" y1="6.275" x2="3.96875" y2="6.50875" width="0.2032" layer="16"/>
 </signal>
 <signal name="N$9">
 <via x="3.4925" y="9.04875" extent="1-16" drill="0.3048"/>
@@ @@ -2788,13 +2788,13 @@ design rules under a new name.</descript @@
 <wire x1="7.223125" y1="5.000625" x2="7.14375" y2="5.08" width="0.2032" layer="16"/>
 <wire x1="7.14375" y1="5.08" x2="3.799921875" y2="5.08" width="0.2032" layer="16"/>
 <wire x1="3.799921875" y1="5.08" x2="2.8575" y2="6.022421875" width="0.2032" layer="16"/>
 </signal>
 <signal name="3.3V">
 <contactref element="U2" pad="5"/>
-<contactref element="C8" pad="2"/>
+<contactref element="C10" pad="2"/>
 <contactref element="C7" pad="1"/>
 <wire x1="22.5425" y1="7.9099" x2="22.54" y2="7.9074" width="0.2032" layer="1"/>
 <via x="3.175" y="11.27125" extent="1-16" drill="0.3048"/>
 <wire x1="22.5425" y1="7.9099" x2="22.5425" y2="8.969375" width="0.2032" layer="1"/>
 <wire x1="22.5425" y1="8.969375" x2="20.558125" y2="8.969375" width="0.2032" layer="1"/>
 <contactref element="LCD1" pad="5"/>
@@ @@ -2808,13 +2808,13 @@ design rules under a new name.</descript @@
 <via x="3.33375" y="10.00125" extent="1-16" drill="0.3048"/>
 <wire x1="2.3625" y1="10.725" x2="2.62875" y2="10.725" width="0.2032" layer="1"/>
 <wire x1="2.62875" y1="10.725" x2="3.175" y2="11.27125" width="0.2032" layer="1"/>
 <wire x1="17.383125" y1="12.22375" x2="16.748125" y2="12.85875" width="0.2032" layer="1"/>
 <wire x1="2.3625" y1="9.925" x2="3.2575" y2="9.925" width="0.2032" layer="1"/>
 <wire x1="3.2575" y1="9.925" x2="3.33375" y2="10.00125" width="0.2032" layer="1"/>
-<contactref element="U3" pad="4"/>
+<contactref element="IC1" pad="4"/>
 <wire x1="23.97125" y1="10.095625" x2="23.97125" y2="10.63625" width="0.2032" layer="1"/>
 <wire x1="23.97125" y1="10.63625" x2="24.13" y2="10.795" width="0.2032" layer="1"/>
 <wire x1="24.13" y1="10.795" x2="25.470625" y2="10.795" width="0.2032" layer="1"/>
 <wire x1="25.470625" y1="10.795" x2="25.55875" y2="10.706875" width="0.2032" layer="1"/>
 <wire x1="22.5425" y1="8.969375" x2="22.845" y2="8.969375" width="0.2032" layer="1"/>
 <wire x1="22.845" y1="8.969375" x2="23.97125" y2="10.095625" width="0.2032" layer="1"/>
@@ @@ -2967,13 +2967,13 @@ design rules under a new name.</descript @@
 <contactref element="U1" pad="29"/>
 <wire x1="14.73625" y1="9.925" x2="15.64" y2="9.925" width="0.2032" layer="1"/>
 <wire x1="17.4625" y1="10.95375" x2="16.66875" y2="10.95375" width="0.2032" layer="1"/>
 <wire x1="16.66875" y1="10.95375" x2="15.64" y2="9.925" width="0.2032" layer="1"/>
 </signal>
 <signal name="D+">
-<contactref element="J2" pad="D+"/>
+<contactref element="JP1" pad="D+"/>
 <via x="38.4175" y="8.55574375" extent="1-16" drill="0.3048"/>
 <wire x1="41.14824375" y1="9.50824375" x2="41.165" y2="9.525" width="0.2032" layer="1"/>
 <wire x1="36.67125" y1="6.429375" x2="38.4175" y2="8.175625" width="0.2032" layer="16"/>
 <wire x1="38.4175" y1="8.175625" x2="38.4175" y2="8.55574375" width="0.2032" layer="16"/>
 <contactref element="U1" pad="22"/>
 <via x="12.303125" y="8.89" extent="1-16" drill="0.3048"/>
@@ @@ -2991,13 +2991,13 @@ design rules under a new name.</descript @@
 <wire x1="11.826875" y1="7.508628125" x2="12.303125" y2="7.984878125" width="0.2032" layer="1"/>
 <wire x1="12.303125" y1="7.984878125" x2="12.303125" y2="8.89" width="0.2032" layer="1"/>
 <wire x1="11.826875" y1="5.434375" x2="11.826875" y2="7.508628125" width="0.2032" layer="1"/>
 <wire x1="11.826875" y1="5.434375" x2="11.83625" y2="5.425" width="0.2032" layer="1"/>
 </signal>
 <signal name="D-">
-<contactref element="J2" pad="D-"/>
+<contactref element="JP1" pad="D-"/>
 <via x="39.0525" y="7.9375" extent="1-16" drill="0.3048"/>
 <wire x1="41.15" y1="8.89" x2="41.165" y2="8.875" width="0.2032" layer="1"/>
 <wire x1="36.83" y1="6.0325" x2="38.735" y2="7.9375" width="0.2032" layer="16"/>
 <wire x1="38.735" y1="7.9375" x2="39.0525" y2="7.9375" width="0.2032" layer="16"/>
 <contactref element="U1" pad="21"/>
 <via x="11.43" y="8.09625" extent="1-16" drill="0.3048"/>
@@ @@ -3016,13 +3016,13 @@ design rules under a new name.</descript @@
 <wire x1="24.60625" y1="7.62" x2="22.304375" y2="7.62" width="0.2032" layer="16"/>
 <wire x1="11.03625" y1="5.425" x2="11.03625" y2="6.035625" width="0.2032" layer="1"/>
 <wire x1="11.03625" y1="6.035625" x2="11.43" y2="6.429375" width="0.2032" layer="1"/>
 <wire x1="11.43" y1="6.429375" x2="11.43" y2="8.09625" width="0.2032" layer="1"/>
 </signal>
 <signal name="VUSB">
-<contactref element="J2" pad="VBUS"/>
+<contactref element="JP1" pad="VBUS"/>
 <contactref element="D1" pad="A"/>
 <via x="42.38625" y="14.035" extent="1-16" drill="0.3048"/>
 <wire x1="42.38625" y1="14.035" x2="41.81625" y2="14.605" width="0.2032" layer="16"/>
 <wire x1="41.81625" y1="14.605" x2="34.925" y2="14.605" width="0.2032" layer="16"/>
 <via x="34.925" y="14.605" extent="1-16" drill="0.3048"/>
 <wire x1="34.925" y1="14.605" x2="33.72" y2="14.605" width="0.2032" layer="1"/>
@@ @@ -3085,23 +3085,23 @@ design rules under a new name.</descript @@
 <wire x1="4.445" y1="8.255" x2="4.92125" y2="8.73125" width="0.2032" layer="1"/>
 <wire x1="4.445" y1="8.255" x2="4.475" y2="8.225" width="0.2032" layer="16"/>
 <wire x1="4.475" y1="8.225" x2="8.335" y2="8.225" width="0.2032" layer="16"/>
 </signal>
 <signal name="T-">
 <contactref element="JP4" pad="P2"/>
 <contactref element="C4" pad="1"/>
 <contactref element="U3" pad="2"/>
 <contactref element="C9" pad="1"/>
 <contactref element="IC1" pad="2"/>
 <wire x1="28.09875" y1="10.706875" x2="28.09875" y2="12.288125" width="0.2032" layer="1"/>
 <wire x1="28.09875" y1="12.288125" x2="28.11375" y2="12.303125" width="0.2032" layer="1"/>
 <wire x1="28.11375" y1="12.303125" x2="28.11375" y2="12.87375" width="0.2032" layer="1"/>
 <wire x1="28.11375" y1="12.87375" x2="29.21" y2="13.97" width="0.2032" layer="1"/>
 </signal>
 <signal name="T+">
 <contactref element="JP4" pad="P1"/>
 <contactref element="C4" pad="2"/>
 <contactref element="U3" pad="3"/>
 <contactref element="C9" pad="2"/>
 <contactref element="IC1" pad="3"/>
 <wire x1="26.82875" y1="10.706875" x2="26.82875" y2="12.288125" width="0.2032" layer="1"/>
 <wire x1="26.82875" y1="12.288125" x2="26.81375" y2="12.303125" width="0.2032" layer="1"/>
 <wire x1="26.81375" y1="12.303125" x2="26.81375" y2="13.82625" width="0.2032" layer="1"/>
 <wire x1="26.81375" y1="13.82625" x2="26.67" y2="13.97" width="0.2032" layer="1"/>
 </signal>
 <signal name="SW-BTN">
@@ @@ -3128,13 +3128,13 @@ design rules under a new name.</descript @@
 <wire x1="5.3975" y1="8.255" x2="4.365625" y2="7.223125" width="0.2032" layer="1"/>
 <wire x1="8.335" y1="6.925" x2="4.66375" y2="6.925" width="0.2032" layer="16"/>
 <wire x1="4.66375" y1="6.925" x2="4.365625" y2="7.223125" width="0.2032" layer="16"/>
 <wire x1="5.3975" y1="8.255" x2="5.3975" y2="8.966221875" width="0.2032" layer="1"/>
 </signal>
 <signal name="SPI_MISO">
-<contactref element="U3" pad="7"/>
+<contactref element="IC1" pad="7"/>
 <wire x1="28.09875" y1="5.306875" x2="28.09875" y2="8.651875" width="0.2032" layer="1"/>
 <via x="28.09875" y="8.651875" extent="1-16" drill="0.3048"/>
 <wire x1="25.796875" y1="8.810625" x2="21.669375" y2="8.810625" width="0.2032" layer="16"/>
 <wire x1="25.796875" y1="8.810625" x2="26.590625" y2="8.016875" width="0.2032" layer="16"/>
 <wire x1="26.590625" y1="8.016875" x2="27.46375" y2="8.016875" width="0.2032" layer="16"/>
 <wire x1="27.46375" y1="8.016875" x2="28.09875" y2="8.651875" width="0.2032" layer="16"/>
@@ @@ -3147,13 +3147,13 @@ design rules under a new name.</descript @@
 <wire x1="6.53625" y1="9.925" x2="9.29" y2="9.925" width="0.2032" layer="1"/>
 <wire x1="9.29" y1="9.925" x2="9.525" y2="10.16" width="0.2032" layer="1"/>
 <wire x1="9.525" y1="10.16" x2="12.144375" y2="10.16" width="0.2032" layer="1"/>
 </signal>
 <signal name="SPI_SCK">
 <contactref element="LCD1" pad="11"/>
-<contactref element="U3" pad="5"/>
+<contactref element="IC1" pad="5"/>
 <via x="25.479375" y="8.175625" extent="1-16" drill="0.3048"/>
 <wire x1="21.828125" y1="8.41375" x2="25.24125" y2="8.41375" width="0.2032" layer="16"/>
 <wire x1="25.24125" y1="8.41375" x2="25.479375" y2="8.175625" width="0.2032" layer="16"/>
 <contactref element="U1" pad="11"/>
 <via x="11.43" y="10.795" extent="1-16" drill="0.3048"/>
 <wire x1="19.52625" y1="7.3025" x2="17.30375" y2="9.525" width="0.2032" layer="16"/>
@@ @@ -3185,13 +3185,13 @@ design rules under a new name.</descript @@
 <wire x1="8.335" y1="9.525" x2="10.16" y2="9.525" width="0.2032" layer="16"/>
 <via x="10.16" y="9.525" extent="1-16" drill="0.3048"/>
 <wire x1="10.16" y1="9.525" x2="12.54125" y2="9.525" width="0.2032" layer="1"/>
 <wire x1="12.54125" y1="9.525" x2="12.779375" y2="9.763125" width="0.2032" layer="1"/>
 </signal>
 <signal name="!CS_MAX">
-<contactref element="U3" pad="6"/>
+<contactref element="IC1" pad="6"/>
 <via x="26.82875" y="8.651875" extent="1-16" drill="0.3048"/>
 <wire x1="26.82875" y1="8.651875" x2="26.82875" y2="5.306875" width="0.2032" layer="1"/>
 <via x="19.84375" y="8.334375" extent="1-16" drill="0.3048"/>
 <wire x1="26.273125" y1="9.2075" x2="26.82875" y2="8.651875" width="0.2032" layer="16"/>
 <contactref element="U1" pad="25"/>
 <wire x1="14.73625" y1="6.725" x2="15.615" y2="6.725" width="0.2032" layer="1"/>
@@ @@ -3203,30 +3203,30 @@ design rules under a new name.</descript @@
 <signal name="AUX-TX">
 <contactref element="U1" pad="19"/>
 <wire x1="14.049375" y1="4.206875" x2="9.604375" y2="4.206875" width="0.2032" layer="1"/>
 <wire x1="9.604375" y1="4.206875" x2="9.445625" y2="4.365625" width="0.2032" layer="1"/>
 <wire x1="9.445625" y1="4.365625" x2="9.445625" y2="5.415625" width="0.2032" layer="1"/>
 <wire x1="9.445625" y1="5.415625" x2="9.43625" y2="5.425" width="0.2032" layer="1"/>
-<contactref element="R2" pad="1"/>
+<contactref element="R3" pad="1"/>
 <contactref element="U1" pad="15"/>
 <wire x1="6.53625" y1="7.525" x2="8.588125" y2="7.525" width="0.2032" layer="1"/>
 <wire x1="8.588125" y1="7.525" x2="9.43625" y2="6.676875" width="0.2032" layer="1"/>
 <wire x1="9.43625" y1="5.425" x2="9.43625" y2="6.676875" width="0.2032" layer="1"/>
 <contactref element="JP1" pad="P2"/>
 <contactref element="C10" pad="1"/>
 <contactref element="JP5" pad="P2"/>
 <contactref element="C8" pad="1"/>
 <wire x1="14.049375" y1="4.206875" x2="14.9225" y2="5.08" width="0.2032" layer="1"/>
 <wire x1="11.43" y1="4.43" x2="12.7" y2="4.43" width="0.2032" layer="16"/>
 <wire x1="12.7" y1="4.43" x2="14.2725" y2="4.43" width="0.2032" layer="16"/>
 <wire x1="14.2725" y1="4.43" x2="14.9225" y2="5.08" width="0.2032" layer="16"/>
 </signal>
 <signal name="AUX-RX">
 <contactref element="U1" pad="20"/>
 <via x="10.795" y="6.6675" extent="1-16" drill="0.3048"/>
 <contactref element="U1" pad="14"/>
 <wire x1="6.53625" y1="8.325" x2="9.7725" y2="8.325" width="0.2032" layer="1"/>
-<contactref element="JP1" pad="P1"/>
+<contactref element="JP5" pad="P1"/>
 <wire x1="9.7725" y1="8.325" x2="10.239375" y2="7.858125" width="0.2032" layer="1"/>
 <wire x1="10.239375" y1="7.858125" x2="10.239375" y2="6.6675" width="0.2032" layer="1"/>
 <wire x1="10.239375" y1="6.6675" x2="10.239375" y2="5.428125" width="0.2032" layer="1"/>
 <wire x1="10.239375" y1="5.428125" x2="10.23625" y2="5.425" width="0.2032" layer="1"/>
 <wire x1="10.795" y1="6.6675" x2="10.239375" y2="6.6675" width="0.2032" layer="1"/>
 <wire x1="17.4625" y1="6.50875" x2="17.4625" y2="5.08" width="0.2032" layer="16"/>

zoncoffee.sch

➞

Show inline comments

@@ @@ -306,26 +306,26 @@ @@
 <pin name="IREF" x="-10.16" y="-12.7" length="short"/>
 <pin name="VCOMH" x="-10.16" y="-15.24" length="short"/>
 <pin name="VCC" x="-10.16" y="-17.78" length="short"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="GND">
+<deviceset name="GND" prefix="SUP">
 <description>&lt;b&gt;GND&lt;/b&gt;</description>
 <gates>
 <gate name="G$1" symbol="GND" x="0" y="0"/>
 </gates>
 <devices>
 <device name="">
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="3.3V">
+<deviceset name="3.3V" prefix="SUP">
 <description>&lt;b&gt;3.3V Supply&lt;/b&gt;</description>
 <gates>
 <gate name="G$1" symbol="3.3V" x="0" y="0"/>
 </gates>
 <devices>
 <device name="">
@@ @@ -2512,18 +2512,18 @@ 5V - VREG-00823</description> @@
 <symbol name="POGOPROG-CONN-4">
 <pin name="SWDIO" x="-2.54" y="-2.54" length="short"/>
 <pin name="SWCLK" x="-2.54" y="0" length="short"/>
 <pin name="VCC" x="-2.54" y="5.08" length="short"/>
 <pin name="GND" x="-2.54" y="2.54" length="short"/>
 <text x="0" y="7.62" size="1.778" layer="95">&gt;NAME</text>
-<text x="0" y="-10.16" size="1.778" layer="95" rot="MR180">&gt;VALUE</text>
+<text x="0" y="-5.08" size="1.778" layer="95" rot="MR180">&gt;VALUE</text>
 <rectangle x1="0" y1="-3.81" x2="1.27" y2="6.35" layer="94"/>
 </symbol>
 </symbols>
 <devicesets>
 <deviceset name="CAP-ARRAY">
+<deviceset name="CAP-ARRAY" prefix="CA">
 <gates>
 <gate name="1" symbol="C" x="-12.7" y="0"/>
 <gate name="2" symbol="C" x="-2.54" y="0"/>
 <gate name="3" symbol="C" x="7.62" y="0"/>
 <gate name="4" symbol="C" x="17.78" y="0"/>
 </gates>
@@ @@ -2587,13 +2587,13 @@ 5V - VREG-00823</description> @@
 <technologies>
 <technology name=""/>
 </technologies>
 </device>
 </devices>
 </deviceset>
 <deviceset name="POGOPIN-CONN-4">
+<deviceset name="POGOPIN-CONN-4" prefix="J">
 <gates>
 <gate name="G$1" symbol="POGOPROG-CONN-4" x="0" y="0"/>
 </gates>
 <devices>
 <device name="" package="POGOPROG-CONN-4-ALLSMT">
 <connects>
@@ @@ -3828,68 +3828,68 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 </variantdefs>
 <classes>
 <class number="0" name="default" width="0" drill="0">
 </class>
 </classes>
 <parts>
 <part name="U$2" library="microbuilder" deviceset="GND" device=""/>
 <part name="U$17" library="microbuilder" deviceset="3.3V" device=""/>
 <part name="SUP3" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUP4" library="microbuilder" deviceset="3.3V" device=""/>
 <part name="SW1" library="dp_devices" deviceset="JOYSTICK_SF303GJ26-3" device=""/>
 <part name="J2" library="SparkFun-Connectors" deviceset="USB" device="-MICROB"/>
 <part name="U3" library="dp_devices" deviceset="IC_MAX31855" device="-SO-8"/>
 <part name="JP1" library="SparkFun-Connectors" deviceset="USB" device="-MICROB"/>
 <part name="IC1" library="dp_devices" deviceset="IC_MAX31855" device="-SO-8"/>
 <part name="U2" library="SparkFun-PowerIC" deviceset="MIC5205" device="3.3V" value="AP2210K-3.3"/>
 <part name="LED1" library="SparkFun-LED" deviceset="LED" device="0603"/>
 <part name="JP2" library="SparkFun-Connectors" deviceset="M02" device="2.54MM_SCREWTERM" value="1546215-2"/>
 <part name="JP3" library="SparkFun-Connectors" deviceset="M02" device="2.54MM_SCREWTERM" value="1546215-2"/>
 <part name="JP4" library="SparkFun-Connectors" deviceset="M02" device="2.54MM_SCREWTERM" value="1546215-2"/>
 <part name="SUPPLY1" library="SparkFun-Aesthetics" deviceset="V_BATT" device=""/>
 <part name="GND1" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="SUPPLY9" library="SparkFun-Aesthetics" deviceset="V_BATT" device=""/>
 <part name="GND5" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="SUPPLY3" library="SparkFun-Aesthetics" deviceset="V_BATT" device=""/>
 <part name="GND2" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="SUPPLY4" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="U$4" library="microbuilder" deviceset="GND" device=""/>
 <part name="U$5" library="microbuilder" deviceset="GND" device=""/>
 <part name="GND3" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="SUPPLY5" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="SUP8" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUP11" library="microbuilder" deviceset="GND" device=""/>
 <part name="D1" library="SparkFun-DiscreteSemi" deviceset="DIODE" device="SOD523"/>
-<part name="SUPPLY5" library="SparkFun-Aesthetics" deviceset="V_BATT" device=""/>
+<part name="SUPPLY7" library="SparkFun-Aesthetics" deviceset="V_BATT" device=""/>
 <part name="C5" library="SparkFun-Passives" deviceset="CAP" device="0603-CAP" value="4.7uF"/>
 <part name="C7" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="4.7uF"/>
 <part name="R1" library="SparkFun-Passives" deviceset="RESISTOR" device="0402-RES"/>
 <part name="GND3" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="GND6" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="GND1" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="SUP12" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUPPLY10" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="C10" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.1uF"/>
 <part name="GND2" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="GND4" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="U$10" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUPPLY9" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="C8" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.1uF"/>
 <part name="GND7" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="GND8" library="SparkFun-Aesthetics" deviceset="GND" device=""/>
 <part name="FRAME1" library="SparkFun-Aesthetics" deviceset="FRAME-A4L" device=""/>
 <part name="LCD1" library="microbuilder" deviceset="DISP_OLED_UG-2832HSWEG04" device="WRAPAROUND" value="SSD1306-SPI"/>
 <part name="C2" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.1uF"/>
 <part name="C1" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.1uF"/>
 <part name="C6" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.1uF"/>
 <part name="U$14" library="microbuilder" deviceset="GND" device=""/>
 <part name="U$15" library="microbuilder" deviceset="GND" device=""/>
 <part name="U$16" library="microbuilder" deviceset="GND" device=""/>
 <part name="U$18" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUPPLY11" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="SUPPLY12" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="SUPPLY13" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="SUP1" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUP2" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUP7" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUP5" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUPPLY1" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="SUPPLY2" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="SUPPLY4" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="CA1" library="Protofusion" deviceset="CAP-ARRAY" device="" value="1uF"/>
 <part name="U$7" library="microbuilder" deviceset="GND" device=""/>
 <part name="C9" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="2.2uF"/>
 <part name="R3" library="SparkFun-Passives" deviceset="RESISTOR" device="0402-RES" value="390k"/>
 <part name="SUP6" library="microbuilder" deviceset="GND" device=""/>
 <part name="C4" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="2.2uF"/>
 <part name="R2" library="SparkFun-Passives" deviceset="RESISTOR" device="0402-RES" value="390k"/>
 <part name="C3" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="2.2uF"/>
 <part name="U$1" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUPPLY2" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="C4" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.01uF"/>
 <part name="SUP9" library="microbuilder" deviceset="GND" device=""/>
 <part name="SUPPLY8" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="C9" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.01uF"/>
 <part name="U1" library="Protofusion" deviceset="STM32F042K-T" device=""/>
 <part name="J1" library="Protofusion" deviceset="POGOPIN-CONN-4" device=""/>
 <part name="SUPPLY6" library="SparkFun-Aesthetics" deviceset="3.3V" device=""/>
 <part name="R2" library="SparkFun-Passives" deviceset="RESISTOR" device="0402-RES"/>
 <part name="U$8" library="microbuilder" deviceset="GND" device=""/>
 <part name="C10" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.1uF"/>
 <part name="JP1" library="SparkFun-Connectors" deviceset="M02" device="2.54MM_SCREWTERM" value="1546215-2"/>
 <part name="R3" library="SparkFun-Passives" deviceset="RESISTOR" device="0402-RES"/>
 <part name="SUP10" library="microbuilder" deviceset="GND" device=""/>
 <part name="C8" library="SparkFun-Passives" deviceset="CAP" device="0402-CAP" value="0.1uF"/>
 <part name="JP5" library="SparkFun-Connectors" deviceset="M02" device="2.54MM_SCREWTERM" value="1546215-2"/>
 </parts>
 <sheets>
 <sheet>
 <plain>
 <text x="127" y="81.28" size="1.778" layer="91">Replace with ceramicone/REVV</text>
 <text x="233.68" y="142.24" size="2.54" layer="113">Connectors</text>
@@ @@ -3898,89 +3898,95 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <text x="15.24" y="83.82" size="2.54" layer="113">Indication</text>
 <text x="139.7" y="43.18" size="2.54" layer="113">Buttons</text>
 <text x="215.9" y="177.8" size="2.54" layer="113">TC Amp</text>
 <text x="101.6" y="172.72" size="2.54" layer="113">Micro</text>
 </plain>
 <instances>
 <instance part="U$2" gate="G$1" x="48.26" y="30.48"/>
 <instance part="U$17" gate="G$1" x="99.06" y="66.04"/>
 <instance part="SUP3" gate="G$1" x="48.26" y="30.48"/>
 <instance part="SUP4" gate="G$1" x="99.06" y="66.04"/>
 <instance part="SW1" gate="SW" x="147.32" y="30.48"/>
 <instance part="J2" gate="G$1" x="256.54" y="35.56"/>
 <instance part="U3" gate="G$1" x="205.74" y="160.02" rot="R180"/>
 <instance part="JP1" gate="G$1" x="256.54" y="35.56"/>
 <instance part="IC1" gate="G$1" x="205.74" y="160.02" rot="R180"/>
 <instance part="U2" gate="G$1" x="149.86" y="66.04"/>
 <instance part="LED1" gate="G$1" x="27.94" y="48.26"/>
 <instance part="JP2" gate="G$1" x="261.62" y="129.54" rot="R180"/>
 <instance part="JP3" gate="G$1" x="261.62" y="114.3" rot="R180"/>
 <instance part="JP4" gate="G$1" x="261.62" y="99.06" rot="R180"/>
 <instance part="SUPPLY1" gate="G$1" x="246.38" y="132.08"/>
 <instance part="GND1" gate="1" x="246.38" y="121.92"/>
 <instance part="SUPPLY9" gate="G$1" x="246.38" y="132.08"/>
 <instance part="GND5" gate="1" x="246.38" y="121.92"/>
 <instance part="SUPPLY3" gate="G$1" x="134.62" y="73.66"/>
 <instance part="GND2" gate="1" x="134.62" y="55.88"/>
 <instance part="SUPPLY4" gate="G$1" x="177.8" y="73.66"/>
 <instance part="U$4" gate="G$1" x="170.18" y="25.4"/>
 <instance part="U$5" gate="G$1" x="251.46" y="33.02"/>
 <instance part="GND3" gate="1" x="134.62" y="55.88"/>
 <instance part="SUPPLY5" gate="G$1" x="177.8" y="73.66"/>
 <instance part="SUP8" gate="G$1" x="170.18" y="25.4"/>
 <instance part="SUP11" gate="G$1" x="251.46" y="33.02"/>
 <instance part="D1" gate="G$1" x="231.14" y="38.1" rot="R180"/>
-<instance part="SUPPLY5" gate="G$1" x="218.44" y="40.64"/>
+<instance part="SUPPLY7" gate="G$1" x="218.44" y="40.64"/>
 <instance part="C5" gate="G$1" x="121.92" y="68.58" rot="R180"/>
 <instance part="C7" gate="G$1" x="182.88" y="63.5"/>
 <instance part="R1" gate="G$1" x="27.94" y="58.42" rot="R270"/>
 <instance part="GND3" gate="1" x="246.38" y="106.68"/>
 <instance part="GND4" gate="1" x="27.94" y="38.1"/>
 <instance part="U$10" gate="G$1" x="269.24" y="152.4"/>
 <instance part="SUPPLY9" gate="G$1" x="269.24" y="167.64"/>
 <instance part="C8" gate="G$1" x="269.24" y="162.56" rot="R180"/>
 <instance part="GND7" gate="1" x="121.92" y="58.42"/>
 <instance part="GND8" gate="1" x="182.88" y="55.88"/>
 <instance part="GND6" gate="1" x="246.38" y="106.68"/>
 <instance part="GND1" gate="1" x="27.94" y="38.1"/>
 <instance part="SUP12" gate="G$1" x="269.24" y="152.4"/>
 <instance part="SUPPLY10" gate="G$1" x="269.24" y="167.64"/>
 <instance part="C10" gate="G$1" x="269.24" y="162.56" rot="R180"/>
 <instance part="GND2" gate="1" x="121.92" y="58.42"/>
 <instance part="GND4" gate="1" x="182.88" y="55.88"/>
 <instance part="FRAME1" gate="G$1" x="5.08" y="5.08"/>
 <instance part="LCD1" gate="G$1" x="86.36" y="53.34"/>
 <instance part="C2" gate="G$1" x="40.64" y="144.78"/>
 <instance part="C1" gate="G$1" x="27.94" y="152.4"/>
 <instance part="C6" gate="G$1" x="170.18" y="116.84"/>
 <instance part="U$14" gate="G$1" x="27.94" y="137.16"/>
 <instance part="U$15" gate="G$1" x="40.64" y="137.16"/>
 <instance part="U$16" gate="G$1" x="170.18" y="109.22"/>
 <instance part="U$18" gate="G$1" x="106.68" y="109.22"/>
 <instance part="SUPPLY11" gate="G$1" x="27.94" y="165.1"/>
 <instance part="SUPPLY12" gate="G$1" x="40.64" y="154.94"/>
 <instance part="SUPPLY13" gate="G$1" x="170.18" y="127"/>
 <instance part="SUP1" gate="G$1" x="27.94" y="137.16"/>
 <instance part="SUP2" gate="G$1" x="40.64" y="137.16"/>
 <instance part="SUP7" gate="G$1" x="170.18" y="109.22"/>
 <instance part="SUP5" gate="G$1" x="106.68" y="109.22"/>
 <instance part="SUPPLY1" gate="G$1" x="27.94" y="165.1"/>
 <instance part="SUPPLY2" gate="G$1" x="40.64" y="154.94"/>
 <instance part="SUPPLY4" gate="G$1" x="170.18" y="127"/>
 <instance part="CA1" gate="1" x="68.58" y="60.96" rot="R90"/>
 <instance part="CA1" gate="2" x="63.5" y="55.88" rot="R90"/>
 <instance part="CA1" gate="3" x="68.58" y="38.1" rot="R90"/>
 <instance part="CA1" gate="4" x="63.5" y="35.56" rot="R90"/>
 <instance part="U$7" gate="G$1" x="165.1" y="157.48"/>
 <instance part="C9" gate="G$1" x="71.12" y="71.12" rot="R90"/>
 <instance part="R3" gate="G$1" x="55.88" y="40.64"/>
 <instance part="SUP6" gate="G$1" x="165.1" y="157.48"/>
 <instance part="C4" gate="G$1" x="71.12" y="71.12" rot="R90"/>
 <instance part="R2" gate="G$1" x="55.88" y="40.64"/>
 <instance part="C3" gate="G$1" x="60.96" y="66.04" rot="R270"/>
 <instance part="U$1" gate="G$1" x="223.52" y="152.4"/>
 <instance part="SUPPLY2" gate="G$1" x="223.52" y="167.64"/>
 <instance part="C4" gate="G$1" x="251.46" y="162.56" rot="R180"/>
 <instance part="SUP9" gate="G$1" x="223.52" y="152.4"/>
 <instance part="SUPPLY8" gate="G$1" x="223.52" y="167.64"/>
 <instance part="C9" gate="G$1" x="251.46" y="162.56" rot="R180"/>
 <instance part="U1" gate="G$1" x="111.76" y="144.78"/>
 <instance part="J1" gate="G$1" x="223.52" y="60.96"/>
 <instance part="SUPPLY6" gate="G$1" x="215.9" y="68.58"/>
 <instance part="R2" gate="G$1" x="246.38" y="76.2" rot="R270"/>
 <instance part="U$8" gate="G$1" x="246.38" y="60.96"/>
 <instance part="C10" gate="G$1" x="241.3" y="73.66"/>
 <instance part="JP1" gate="G$1" x="261.62" y="86.36" rot="R180"/>
 <instance part="R3" gate="G$1" x="246.38" y="76.2" smashed="yes" rot="R270">
 <attribute name="NAME" x="248.412" y="76.9366" size="1.778" layer="95"/>
 <attribute name="VALUE" x="243.078" y="80.01" size="1.778" layer="96" rot="R270"/>
 </instance>
 <instance part="SUP10" gate="G$1" x="246.38" y="60.96"/>
 <instance part="C8" gate="G$1" x="241.3" y="73.66" smashed="yes">
 <attribute name="NAME" x="240.284" y="78.359" size="1.778" layer="95" rot="R180"/>
 <attribute name="VALUE" x="240.538" y="73.279" size="1.778" layer="96" rot="R180"/>
 </instance>
 <instance part="JP5" gate="G$1" x="261.62" y="86.36" rot="R180"/>
 </instances>
 <busses>
 </busses>
 <nets>
 <net name="N$1" class="0">
 <segment>
 <wire x1="76.2" y1="68.58" x2="55.88" y2="68.58" width="0.1524" layer="91"/>
 <wire x1="55.88" y1="68.58" x2="55.88" y2="71.12" width="0.1524" layer="91"/>
 <wire x1="55.88" y1="71.12" x2="66.04" y2="71.12" width="0.1524" layer="91"/>
 <pinref part="LCD1" gate="G$1" pin="C2-"/>
-<pinref part="C9" gate="G$1" pin="1"/>
+<pinref part="C4" gate="G$1" pin="1"/>
 </segment>
 </net>
 <net name="N$2" class="0">
 <segment>
 <wire x1="73.66" y1="71.12" x2="76.2" y2="71.12" width="0.1524" layer="91"/>
 <pinref part="LCD1" gate="G$1" pin="C2+"/>
-<pinref part="C9" gate="G$1" pin="2"/>
+<pinref part="C4" gate="G$1" pin="2"/>
 </segment>
 </net>
 <net name="N$3" class="0">
 <segment>
 <wire x1="76.2" y1="63.5" x2="55.88" y2="63.5" width="0.1524" layer="91"/>
 <wire x1="55.88" y1="63.5" x2="55.88" y2="66.04" width="0.1524" layer="91"/>
@@ @@ -4012,122 +4018,122 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <wire x1="58.42" y1="35.56" x2="48.26" y2="35.56" width="0.1524" layer="91"/>
 <wire x1="63.5" y1="38.1" x2="48.26" y2="38.1" width="0.1524" layer="91"/>
 <junction x="55.88" y="58.42"/>
 <junction x="48.26" y="40.64"/>
 <junction x="48.26" y="35.56"/>
 <junction x="48.26" y="38.1"/>
-<pinref part="U$2" gate="G$1" pin="GND"/>
+<pinref part="SUP3" gate="G$1" pin="GND"/>
 <pinref part="LCD1" gate="G$1" pin="VSS"/>
 <pinref part="CA1" gate="1" pin="1"/>
 <pinref part="CA1" gate="2" pin="1"/>
 <pinref part="CA1" gate="3" pin="1"/>
 <pinref part="CA1" gate="4" pin="1"/>
-<pinref part="R3" gate="G$1" pin="1"/>
+<pinref part="R2" gate="G$1" pin="1"/>
 </segment>
 <segment>
 <pinref part="JP2" gate="G$1" pin="2"/>
-<pinref part="GND1" gate="1" pin="GND"/>
+<pinref part="GND5" gate="1" pin="GND"/>
 <wire x1="254" y1="127" x2="246.38" y2="127" width="0.1524" layer="91"/>
 <wire x1="246.38" y1="127" x2="246.38" y2="124.46" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U2" gate="G$1" pin="GND"/>
 <wire x1="139.7" y1="66.04" x2="134.62" y2="66.04" width="0.1524" layer="91"/>
 <wire x1="134.62" y1="66.04" x2="134.62" y2="58.42" width="0.1524" layer="91"/>
-<pinref part="GND2" gate="1" pin="GND"/>
+<pinref part="GND3" gate="1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="SW1" gate="SW" pin="COMMON"/>
-<pinref part="U$4" gate="G$1" pin="GND"/>
+<pinref part="SUP8" gate="G$1" pin="GND"/>
 <wire x1="154.94" y1="30.48" x2="170.18" y2="30.48" width="0.1524" layer="91"/>
 <wire x1="170.18" y1="30.48" x2="170.18" y2="27.94" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="J2" gate="G$1" pin="GND"/>
 <pinref part="U$5" gate="G$1" pin="GND"/>
 <pinref part="JP1" gate="G$1" pin="GND"/>
 <pinref part="SUP11" gate="G$1" pin="GND"/>
 <wire x1="251.46" y1="35.56" x2="254" y2="35.56" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="JP3" gate="G$1" pin="2"/>
 <wire x1="254" y1="111.76" x2="246.38" y2="111.76" width="0.1524" layer="91"/>
 <wire x1="246.38" y1="111.76" x2="246.38" y2="109.22" width="0.1524" layer="91"/>
-<pinref part="GND3" gate="1" pin="GND"/>
+<pinref part="GND6" gate="1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="LED1" gate="G$1" pin="C"/>
-<pinref part="GND4" gate="1" pin="GND"/>
+<pinref part="GND1" gate="1" pin="GND"/>
 <wire x1="27.94" y1="43.18" x2="27.94" y2="40.64" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C8" gate="G$1" pin="1"/>
 <pinref part="U$10" gate="G$1" pin="GND"/>
 <pinref part="C10" gate="G$1" pin="1"/>
 <pinref part="SUP12" gate="G$1" pin="GND"/>
 <wire x1="269.24" y1="157.48" x2="269.24" y2="154.94" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C5" gate="G$1" pin="1"/>
-<pinref part="GND7" gate="1" pin="GND"/>
+<pinref part="GND2" gate="1" pin="GND"/>
 <wire x1="121.92" y1="60.96" x2="121.92" y2="63.5" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C7" gate="G$1" pin="2"/>
-<pinref part="GND8" gate="1" pin="GND"/>
+<pinref part="GND4" gate="1" pin="GND"/>
 <wire x1="182.88" y1="58.42" x2="182.88" y2="60.96" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C1" gate="G$1" pin="2"/>
 <wire x1="27.94" y1="149.86" x2="27.94" y2="139.7" width="0.1524" layer="91"/>
-<pinref part="U$14" gate="G$1" pin="GND"/>
+<pinref part="SUP1" gate="G$1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="C2" gate="G$1" pin="2"/>
 <wire x1="40.64" y1="142.24" x2="40.64" y2="139.7" width="0.1524" layer="91"/>
-<pinref part="U$15" gate="G$1" pin="GND"/>
+<pinref part="SUP2" gate="G$1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="C6" gate="G$1" pin="2"/>
 <wire x1="170.18" y1="114.3" x2="170.18" y2="111.76" width="0.1524" layer="91"/>
-<pinref part="U$16" gate="G$1" pin="GND"/>
+<pinref part="SUP7" gate="G$1" pin="GND"/>
 </segment>
 <segment>
-<pinref part="U$18" gate="G$1" pin="GND"/>
+<pinref part="SUP5" gate="G$1" pin="GND"/>
 <wire x1="106.68" y1="111.76" x2="106.68" y2="114.3" width="0.1524" layer="91"/>
 <pinref part="U1" gate="G$1" pin="GND"/>
 </segment>
 <segment>
 <wire x1="152.4" y1="162.56" x2="165.1" y2="162.56" width="0.1524" layer="91"/>
 <wire x1="165.1" y1="162.56" x2="165.1" y2="160.02" width="0.1524" layer="91"/>
-<pinref part="U$7" gate="G$1" pin="GND"/>
+<pinref part="SUP6" gate="G$1" pin="GND"/>
 <pinref part="U1" gate="G$1" pin="BOOT0/I2C1_SCL/CAN_RX/PB8"/>
 </segment>
 <segment>
-<pinref part="U3" gate="G$1" pin="GND"/>
+<pinref part="IC1" gate="G$1" pin="GND"/>
 <wire x1="223.52" y1="157.48" x2="220.98" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="223.52" y1="157.48" x2="223.52" y2="154.94" width="0.1524" layer="91"/>
-<pinref part="U$1" gate="G$1" pin="GND"/>
+<pinref part="SUP9" gate="G$1" pin="GND"/>
 </segment>
 <segment>
 <wire x1="215.9" y1="63.5" x2="220.98" y2="63.5" width="0.1524" layer="91"/>
 <label x="215.9" y="63.5" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="J1" gate="G$1" pin="GND"/>
 </segment>
 <segment>
-<pinref part="R2" gate="G$1" pin="2"/>
+<pinref part="R3" gate="G$1" pin="2"/>
 <wire x1="246.38" y1="71.12" x2="246.38" y2="68.58" width="0.1524" layer="91"/>
-<pinref part="U$8" gate="G$1" pin="GND"/>
+<pinref part="SUP10" gate="G$1" pin="GND"/>
 <wire x1="246.38" y1="68.58" x2="246.38" y2="63.5" width="0.1524" layer="91"/>
 <wire x1="246.38" y1="68.58" x2="241.3" y2="68.58" width="0.1524" layer="91"/>
 <junction x="246.38" y="68.58"/>
-<pinref part="C10" gate="G$1" pin="2"/>
+<pinref part="C8" gate="G$1" pin="2"/>
 <wire x1="241.3" y1="68.58" x2="241.3" y2="71.12" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="N$8" class="0">
 <segment>
 <wire x1="76.2" y1="40.64" x2="60.96" y2="40.64" width="0.1524" layer="91"/>
 <pinref part="LCD1" gate="G$1" pin="IREF"/>
-<pinref part="R3" gate="G$1" pin="2"/>
+<pinref part="R2" gate="G$1" pin="2"/>
 </segment>
 </net>
 <net name="N$9" class="0">
 <segment>
 <wire x1="76.2" y1="38.1" x2="71.12" y2="38.1" width="0.1524" layer="91"/>
 <pinref part="LCD1" gate="G$1" pin="VCOMH"/>
@@ @@ -4147,79 +4153,79 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <wire x1="99.06" y1="60.96" x2="76.2" y2="60.96" width="0.1524" layer="91"/>
 <wire x1="76.2" y1="60.96" x2="71.12" y2="60.96" width="0.1524" layer="91"/>
 <wire x1="66.04" y1="55.88" x2="76.2" y2="55.88" width="0.1524" layer="91"/>
 <wire x1="76.2" y1="55.88" x2="99.06" y2="55.88" width="0.1524" layer="91"/>
 <wire x1="99.06" y1="55.88" x2="99.06" y2="60.96" width="0.1524" layer="91"/>
 <junction x="99.06" y="60.96"/>
-<pinref part="U$17" gate="G$1" pin="3.3V"/>
+<pinref part="SUP4" gate="G$1" pin="3.3V"/>
 <pinref part="LCD1" gate="G$1" pin="VBAT"/>
 <junction x="76.2" y="60.96"/>
 <pinref part="LCD1" gate="G$1" pin="VDD"/>
 <junction x="76.2" y="55.88"/>
 <pinref part="CA1" gate="1" pin="2"/>
 <pinref part="CA1" gate="2" pin="2"/>
 </segment>
 <segment>
 <pinref part="U2" gate="G$1" pin="OUT"/>
 <wire x1="157.48" y1="71.12" x2="177.8" y2="71.12" width="0.1524" layer="91"/>
 <wire x1="177.8" y1="71.12" x2="177.8" y2="73.66" width="0.1524" layer="91"/>
-<pinref part="SUPPLY4" gate="G$1" pin="3.3V"/>
+<pinref part="SUPPLY5" gate="G$1" pin="3.3V"/>
 <pinref part="C7" gate="G$1" pin="1"/>
 <wire x1="177.8" y1="71.12" x2="182.88" y2="71.12" width="0.1524" layer="91"/>
 <wire x1="182.88" y1="71.12" x2="182.88" y2="68.58" width="0.1524" layer="91"/>
 <junction x="177.8" y="71.12"/>
 </segment>
 <segment>
 <pinref part="C8" gate="G$1" pin="2"/>
 <pinref part="SUPPLY9" gate="G$1" pin="3.3V"/>
 <pinref part="C10" gate="G$1" pin="2"/>
 <pinref part="SUPPLY10" gate="G$1" pin="3.3V"/>
 <wire x1="269.24" y1="165.1" x2="269.24" y2="167.64" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="C1" gate="G$1" pin="1"/>
 <wire x1="66.04" y1="162.56" x2="27.94" y2="162.56" width="0.1524" layer="91"/>
 <wire x1="27.94" y1="162.56" x2="27.94" y2="157.48" width="0.1524" layer="91"/>
-<pinref part="SUPPLY11" gate="G$1" pin="3.3V"/>
+<pinref part="SUPPLY1" gate="G$1" pin="3.3V"/>
 <wire x1="27.94" y1="165.1" x2="27.94" y2="162.56" width="0.1524" layer="91"/>
 <junction x="27.94" y="162.56"/>
 <pinref part="U1" gate="G$1" pin="VDD"/>
 </segment>
 <segment>
 <pinref part="C2" gate="G$1" pin="1"/>
 <wire x1="66.04" y1="152.4" x2="40.64" y2="152.4" width="0.1524" layer="91"/>
 <wire x1="40.64" y1="152.4" x2="40.64" y2="149.86" width="0.1524" layer="91"/>
-<pinref part="SUPPLY12" gate="G$1" pin="3.3V"/>
+<pinref part="SUPPLY2" gate="G$1" pin="3.3V"/>
 <wire x1="40.64" y1="154.94" x2="40.64" y2="152.4" width="0.1524" layer="91"/>
 <junction x="40.64" y="152.4"/>
 <pinref part="U1" gate="G$1" pin="VDDA"/>
 </segment>
 <segment>
 <pinref part="C6" gate="G$1" pin="1"/>
 <wire x1="170.18" y1="127" x2="170.18" y2="124.46" width="0.1524" layer="91"/>
-<pinref part="SUPPLY13" gate="G$1" pin="3.3V"/>
+<pinref part="SUPPLY4" gate="G$1" pin="3.3V"/>
 <pinref part="U1" gate="G$1" pin="VDDIO2"/>
 <wire x1="170.18" y1="124.46" x2="170.18" y2="121.92" width="0.1524" layer="91"/>
 <wire x1="152.4" y1="124.46" x2="170.18" y2="124.46" width="0.1524" layer="91"/>
 <junction x="170.18" y="124.46"/>
 </segment>
 <segment>
-<pinref part="U3" gate="G$1" pin="VCC"/>
+<pinref part="IC1" gate="G$1" pin="VCC"/>
 <wire x1="223.52" y1="165.1" x2="223.52" y2="167.64" width="0.1524" layer="91"/>
 <wire x1="223.52" y1="165.1" x2="220.98" y2="165.1" width="0.1524" layer="91"/>
-<pinref part="SUPPLY2" gate="G$1" pin="3.3V"/>
+<pinref part="SUPPLY8" gate="G$1" pin="3.3V"/>
 </segment>
 <segment>
 <pinref part="J1" gate="G$1" pin="VCC"/>
 <pinref part="SUPPLY6" gate="G$1" pin="3.3V"/>
 <wire x1="220.98" y1="66.04" x2="215.9" y2="66.04" width="0.1524" layer="91"/>
 <wire x1="215.9" y1="66.04" x2="215.9" y2="68.58" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="V_BATT" class="0">
 <segment>
 <pinref part="JP2" gate="G$1" pin="1"/>
-<pinref part="SUPPLY1" gate="G$1" pin="V_BATT"/>
+<pinref part="SUPPLY9" gate="G$1" pin="V_BATT"/>
 <wire x1="254" y1="129.54" x2="246.38" y2="129.54" width="0.1524" layer="91"/>
 <wire x1="246.38" y1="129.54" x2="246.38" y2="132.08" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="U2" gate="G$1" pin="EN"/>
 <wire x1="139.7" y1="60.96" x2="137.16" y2="60.96" width="0.1524" layer="91"/>
@@ @@ -4235,13 +4241,13 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <junction x="134.62" y="71.12"/>
 </segment>
 <segment>
 <pinref part="D1" gate="G$1" pin="C"/>
 <wire x1="228.6" y1="38.1" x2="218.44" y2="38.1" width="0.1524" layer="91"/>
 <wire x1="218.44" y1="38.1" x2="218.44" y2="40.64" width="0.1524" layer="91"/>
-<pinref part="SUPPLY5" gate="G$1" pin="V_BATT"/>
+<pinref part="SUPPLY7" gate="G$1" pin="V_BATT"/>
 </segment>
 </net>
 <net name="SW-A" class="0">
 <segment>
 <pinref part="SW1" gate="SW" pin="A"/>
 <wire x1="129.54" y1="33.02" x2="139.7" y2="33.02" width="0.1524" layer="91"/>
@@ @@ -4288,37 +4294,37 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <label x="154.94" y="154.94" size="1.27" layer="95" xref="yes"/>
 <pinref part="U1" gate="G$1" pin="I2C1_SCL/USART1_TX/PB6"/>
 </segment>
 </net>
 <net name="D+" class="0">
 <segment>
-<pinref part="J2" gate="G$1" pin="D+"/>
+<pinref part="JP1" gate="G$1" pin="D+"/>
 <wire x1="248.92" y1="43.18" x2="254" y2="43.18" width="0.1524" layer="91"/>
 <label x="248.92" y="43.18" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
 <label x="154.94" y="137.16" size="1.27" layer="95" xref="yes"/>
 <wire x1="152.4" y1="137.16" x2="154.94" y2="137.16" width="0.1524" layer="91"/>
 <pinref part="U1" gate="G$1" pin="CAN_TX/I2C1_SDA/USB_DP/PA12"/>
 </segment>
 </net>
 <net name="D-" class="0">
 <segment>
-<pinref part="J2" gate="G$1" pin="D-"/>
+<pinref part="JP1" gate="G$1" pin="D-"/>
 <wire x1="248.92" y1="40.64" x2="254" y2="40.64" width="0.1524" layer="91"/>
 <label x="248.92" y="40.64" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
 <label x="154.94" y="134.62" size="1.27" layer="95" xref="yes"/>
 <wire x1="152.4" y1="134.62" x2="154.94" y2="134.62" width="0.1524" layer="91"/>
 <pinref part="U1" gate="G$1" pin="CAN_RX/I2C1_SCL/USB_DM/PA11"/>
 </segment>
 </net>
 <net name="VUSB" class="0">
 <segment>
-<pinref part="J2" gate="G$1" pin="VBUS"/>
+<pinref part="JP1" gate="G$1" pin="VBUS"/>
 <pinref part="D1" gate="G$1" pin="A"/>
 <wire x1="233.68" y1="38.1" x2="238.76" y2="38.1" width="0.1524" layer="91"/>
 <wire x1="238.76" y1="38.1" x2="254" y2="38.1" width="0.1524" layer="91"/>
 <wire x1="238.76" y1="38.1" x2="238.76" y2="43.18" width="0.1524" layer="91"/>
 <junction x="238.76" y="38.1"/>
 <wire x1="238.76" y1="43.18" x2="236.22" y2="43.18" width="0.1524" layer="91"/>
@@ @@ -4384,36 +4390,36 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <segment>
 <pinref part="JP4" gate="G$1" pin="2"/>
 <wire x1="254" y1="96.52" x2="246.38" y2="96.52" width="0.1524" layer="91"/>
 <label x="246.38" y="96.52" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
-<pinref part="C4" gate="G$1" pin="1"/>
+<pinref part="C9" gate="G$1" pin="1"/>
 <wire x1="251.46" y1="152.4" x2="251.46" y2="157.48" width="0.1524" layer="91"/>
 <wire x1="251.46" y1="152.4" x2="254" y2="152.4" width="0.1524" layer="91"/>
 <junction x="251.46" y="152.4"/>
 <label x="254" y="152.4" size="1.27" layer="95" xref="yes"/>
-<pinref part="U3" gate="G$1" pin="T-"/>
+<pinref part="IC1" gate="G$1" pin="T-"/>
 <wire x1="220.98" y1="160.02" x2="231.14" y2="160.02" width="0.1524" layer="91"/>
 <wire x1="231.14" y1="160.02" x2="231.14" y2="152.4" width="0.1524" layer="91"/>
 <wire x1="231.14" y1="152.4" x2="251.46" y2="152.4" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="T+" class="0">
 <segment>
 <pinref part="JP4" gate="G$1" pin="1"/>
 <wire x1="254" y1="99.06" x2="246.38" y2="99.06" width="0.1524" layer="91"/>
 <label x="246.38" y="99.06" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
-<pinref part="C4" gate="G$1" pin="2"/>
+<pinref part="C9" gate="G$1" pin="2"/>
 <wire x1="251.46" y1="167.64" x2="251.46" y2="165.1" width="0.1524" layer="91"/>
 <wire x1="251.46" y1="167.64" x2="254" y2="167.64" width="0.1524" layer="91"/>
 <junction x="251.46" y="167.64"/>
 <label x="254" y="167.64" size="1.27" layer="95" xref="yes"/>
-<pinref part="U3" gate="G$1" pin="T+"/>
+<pinref part="IC1" gate="G$1" pin="T+"/>
 <wire x1="220.98" y1="162.56" x2="231.14" y2="162.56" width="0.1524" layer="91"/>
 <wire x1="231.14" y1="162.56" x2="231.14" y2="167.64" width="0.1524" layer="91"/>
 <wire x1="231.14" y1="167.64" x2="251.46" y2="167.64" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="SW-BTN" class="0">
@@ @@ -4439,13 +4445,13 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <label x="63.5" y="132.08" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="U1" gate="G$1" pin="PA7/ADC7/SPI1_MOSI"/>
 </segment>
 </net>
 <net name="SPI_MISO" class="0">
 <segment>
-<pinref part="U3" gate="G$1" pin="SO"/>
+<pinref part="IC1" gate="G$1" pin="SO"/>
 <wire x1="187.96" y1="160.02" x2="190.5" y2="160.02" width="0.1524" layer="91"/>
 <label x="187.96" y="160.02" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
 <wire x1="66.04" y1="134.62" x2="63.5" y2="134.62" width="0.1524" layer="91"/>
 <label x="63.5" y="134.62" size="1.27" layer="95" rot="R180" xref="yes"/>
@@ @@ -4456,13 +4462,13 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <segment>
 <wire x1="73.66" y1="45.72" x2="76.2" y2="45.72" width="0.1524" layer="91"/>
 <label x="73.66" y="45.72" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="LCD1" gate="G$1" pin="SCLK"/>
 </segment>
 <segment>
-<pinref part="U3" gate="G$1" pin="SCK"/>
+<pinref part="IC1" gate="G$1" pin="SCK"/>
 <wire x1="187.96" y1="165.1" x2="190.5" y2="165.1" width="0.1524" layer="91"/>
 <label x="187.96" y="165.1" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
 <wire x1="66.04" y1="137.16" x2="63.5" y2="137.16" width="0.1524" layer="91"/>
 <label x="63.5" y="137.16" size="1.27" layer="95" rot="R180" xref="yes"/>
@@ @@ -4480,13 +4486,13 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <label x="63.5" y="144.78" size="1.27" layer="95" rot="R180" xref="yes"/>
 <pinref part="U1" gate="G$1" pin="PA2/ADC2/USART2_TX"/>
 </segment>
 </net>
 <net name="!CS_MAX" class="0">
 <segment>
-<pinref part="U3" gate="G$1" pin="!CS"/>
+<pinref part="IC1" gate="G$1" pin="!CS"/>
 <wire x1="187.96" y1="162.56" x2="190.5" y2="162.56" width="0.1524" layer="91"/>
 <label x="187.96" y="162.56" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>
 <segment>
 <wire x1="152.4" y1="144.78" x2="154.94" y2="144.78" width="0.1524" layer="91"/>
 <label x="154.94" y="144.78" size="1.27" layer="95" xref="yes"/>
@@ @@ -4499,19 +4505,19 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <label x="154.94" y="129.54" size="1.27" layer="95" xref="yes"/>
 <pinref part="U1" gate="G$1" pin="USART1_TX/I2C1_SCL/PA9"/>
 </segment>
 <segment>
 <wire x1="236.22" y1="83.82" x2="241.3" y2="83.82" width="0.1524" layer="91"/>
 <label x="236.22" y="83.82" size="1.27" layer="95" rot="R180" xref="yes"/>
-<pinref part="R2" gate="G$1" pin="1"/>
+<pinref part="R3" gate="G$1" pin="1"/>
 <wire x1="241.3" y1="83.82" x2="246.38" y2="83.82" width="0.1524" layer="91"/>
 <wire x1="246.38" y1="83.82" x2="254" y2="83.82" width="0.1524" layer="91"/>
 <wire x1="246.38" y1="83.82" x2="246.38" y2="81.28" width="0.1524" layer="91"/>
 <junction x="246.38" y="83.82"/>
 <pinref part="JP1" gate="G$1" pin="2"/>
 <pinref part="C10" gate="G$1" pin="1"/>
 <pinref part="JP5" gate="G$1" pin="2"/>
 <pinref part="C8" gate="G$1" pin="1"/>
 <wire x1="241.3" y1="83.82" x2="241.3" y2="78.74" width="0.1524" layer="91"/>
 <junction x="241.3" y="83.82"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="PB1/ADC9"/>
 <wire x1="63.5" y1="127" x2="66.04" y2="127" width="0.1524" layer="91"/>
@@ @@ -4524,13 +4530,13 @@ Standard 0603 ceramic capacitor, and 0.1 @@
 <label x="154.94" y="132.08" size="1.27" layer="95" xref="yes"/>
 <pinref part="U1" gate="G$1" pin="USART1_RX/I2C1_SDA/PA10"/>
 </segment>
 <segment>
 <wire x1="236.22" y1="86.36" x2="254" y2="86.36" width="0.1524" layer="91"/>
 <label x="236.22" y="86.36" size="1.27" layer="95" rot="R180" xref="yes"/>
-<pinref part="JP1" gate="G$1" pin="1"/>
+<pinref part="JP5" gate="G$1" pin="1"/>
 </segment>
 <segment>
 <pinref part="U1" gate="G$1" pin="PB0/ADC8"/>
 <wire x1="63.5" y1="129.54" x2="66.04" y2="129.54" width="0.1524" layer="91"/>
 <label x="63.5" y="129.54" size="1.27" layer="95" rot="R180" xref="yes"/>
 </segment>

0 comments (0 inline, 0 general)