Changeset - 63b5468d895a
Parent rev.
Child rev.
[Not reviewed]
default
0 2 0
Ethan Zonca - 13 years ago 2012-05-20 17:56:48
ez@ethanzonca.com
Finished up routing of LCD header, need to find suitable trimpot for footprint.
2 files changed with 15 insertions and 17 deletions:
ZonCoffeeTiny.brd
10
10
ZonCoffeeTiny.sch
5
7
0 comments (0 inline, 0 general)
ZonCoffeeTiny.brd
➞
Show inline comments
 
<?xml version="1.0" encoding="utf-8"?>
 
<!DOCTYPE eagle SYSTEM "eagle.dtd">
 
<eagle version="6.0">
 
<eagle version="6.2">
 
<drawing>
 
<settings>
 
<setting alwaysvectorfont="yes"/>
 
<setting verticaltext="up"/>
 
</settings>
 
<grid distance="5" unitdist="mil" unit="mil" style="lines" multiple="1" display="yes" altdistance="0.1" altunitdist="inch" altunit="inch"/>
 
<layers>
 
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
 
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
 
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
 
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
 
@@ -3081,26 +3081,26 @@ Please make sure your boards conform to
 
<wire x1="47.0916" y1="30.5054" x2="50.292" y2="30.5054" width="0.254" layer="1"/>
 
<wire x1="50.292" y1="30.5054" x2="53.1876" y2="30.5054" width="0.254" layer="16"/>
 
<wire x1="53.1876" y1="30.5054" x2="53.34" y2="30.6578" width="0.254" layer="16"/>
 
<wire x1="47.05" y1="30.48" x2="47.0916" y2="30.5054" width="0.254" layer="1"/>
 
<wire x1="53.34" y1="30.6578" x2="53.34" y2="30.17" width="0.254" layer="16"/>
 
<via x="50.292" y="30.5054" extent="1-16" drill="0.3302"/>
 
</signal>
 
<signal name="AUX0">
 
<contactref element="IC1" pad="41"/>
 
<wire x1="22.4028" y1="40.2336" x2="22.4028" y2="39.4716" width="0.254" layer="1"/>
 
<wire x1="21.7805" y1="40.8559" x2="22.4028" y2="40.2336" width="0.254" layer="1"/>
 
<wire x1="17.0561" y1="40.8559" x2="21.7805" y2="40.8559" width="0.254" layer="1"/>
 
<wire x1="17.0561" y1="41.3131" x2="17.0561" y2="40.8559" width="0.254" layer="1"/>
 
<wire x1="16.6116" y1="41.7576" x2="17.0561" y2="41.3131" width="0.254" layer="1"/>
 
<wire x1="17.0561" y1="41.1861" x2="17.0561" y2="40.8559" width="0.254" layer="1"/>
 
<wire x1="16.6116" y1="41.7576" x2="17.0561" y2="41.1861" width="0.254" layer="1"/>
 
<wire x1="16.6116" y1="43.18" x2="16.6116" y2="41.7576" width="0.254" layer="1"/>
 
<wire x1="22.4028" y1="39.4716" x2="22.53" y2="39.455" width="0.254" layer="1"/>
 
<contactref element="AUX" pad="3"/>
 
<wire x1="16.6116" y1="43.18" x2="16.51" y2="43.18" width="0.254" layer="1"/>
 
</signal>
 
<signal name="AUX1">
 
<contactref element="IC1" pad="40"/>
 
<wire x1="22.225" y1="41.275" x2="23.495" y2="40.005" width="0.254" layer="1"/>
 
<wire x1="19.05" y1="41.275" x2="22.225" y2="41.275" width="0.254" layer="1"/>
 
<wire x1="23.495" y1="40.005" x2="23.33" y2="39.455" width="0.254" layer="1"/>
 
<contactref element="AUX" pad="4"/>
 
<wire x1="19.05" y1="41.275" x2="19.05" y2="43.18" width="0.254" layer="1"/>
 
@@ -3111,49 +3111,49 @@ Please make sure your boards conform to
 
<wire x1="23.9268" y1="39.624" x2="23.9268" y2="40.5384" width="0.254" layer="1"/>
 
<wire x1="23.9268" y1="40.5384" x2="21.9456" y2="42.5196" width="0.254" layer="1"/>
 
<wire x1="21.9456" y1="42.5196" x2="21.6408" y2="42.5196" width="0.254" layer="1"/>
 
<wire x1="24.13" y1="39.455" x2="24.0792" y2="39.4716" width="0.254" layer="1"/>
 
<contactref element="AUX" pad="5"/>
 
<wire x1="21.6408" y1="42.5196" x2="21.6408" y2="43.18" width="0.254" layer="1"/>
 
<wire x1="21.6408" y1="43.18" x2="21.59" y2="43.18" width="0.254" layer="1"/>
 
</signal>
 
<signal name="AUX3">
 
<contactref element="IC1" pad="38"/>
 
<wire x1="24.8412" y1="39.4716" x2="24.6888" y2="39.624" width="0.254" layer="1"/>
 
<wire x1="24.6888" y1="39.624" x2="24.6888" y2="41.7576" width="0.254" layer="1"/>
 
<wire x1="24.6888" y1="41.7576" x2="24.2316" y2="42.2148" width="0.254" layer="1"/>
 
<wire x1="24.6888" y1="41.7576" x2="24.1046" y2="42.3418" width="0.254" layer="1"/>
 
<wire x1="24.93" y1="39.455" x2="24.8412" y2="39.4716" width="0.254" layer="1"/>
 
<contactref element="AUX" pad="6"/>
 
<wire x1="24.2316" y1="42.2148" x2="24.2316" y2="43.18" width="0.254" layer="1"/>
 
<wire x1="24.2316" y1="43.18" x2="24.13" y2="43.18" width="0.254" layer="1"/>
 
<wire x1="24.1046" y1="42.3418" x2="24.1046" y2="43.053" width="0.254" layer="1"/>
 
<wire x1="24.1046" y1="43.053" x2="24.13" y2="43.18" width="0.254" layer="1"/>
 
</signal>
 
<signal name="AUX4">
 
<contactref element="IC1" pad="37"/>
 
<wire x1="25.7556" y1="39.4716" x2="25.908" y2="39.624" width="0.254" layer="1"/>
 
<wire x1="25.908" y1="39.624" x2="25.908" y2="41.148" width="0.254" layer="1"/>
 
<wire x1="25.908" y1="41.148" x2="26.67" y2="41.91" width="0.254" layer="1"/>
 
<wire x1="26.67" y1="41.91" x2="26.67" y2="42.5196" width="0.254" layer="1"/>
 
<wire x1="25.73" y1="39.455" x2="25.7556" y2="39.4716" width="0.254" layer="1"/>
 
<contactref element="AUX" pad="7"/>
 
<wire x1="26.67" y1="42.5196" x2="26.67" y2="43.18" width="0.254" layer="1"/>
 
</signal>
 
<signal name="AUX5">
 
<contactref element="IC1" pad="36"/>
 
<wire x1="26.67" y1="39.4716" x2="26.67" y2="40.386" width="0.254" layer="1"/>
 
<wire x1="26.67" y1="40.386" x2="28.8036" y2="42.5196" width="0.254" layer="1"/>
 
<wire x1="28.8036" y1="42.5196" x2="29.1084" y2="42.5196" width="0.254" layer="1"/>
 
<wire x1="28.8036" y1="42.5196" x2="29.2354" y2="42.5196" width="0.254" layer="1"/>
 
<wire x1="26.53" y1="39.455" x2="26.67" y2="39.4716" width="0.254" layer="1"/>
 
<contactref element="AUX" pad="8"/>
 
<wire x1="29.1084" y1="42.5196" x2="29.1084" y2="43.18" width="0.254" layer="1"/>
 
<wire x1="29.1084" y1="43.18" x2="29.21" y2="43.18" width="0.254" layer="1"/>
 
<wire x1="29.2354" y1="42.5196" x2="29.2354" y2="43.18" width="0.254" layer="1"/>
 
<wire x1="29.2354" y1="43.18" x2="29.21" y2="43.18" width="0.254" layer="1"/>
 
</signal>
 
<signal name="MAX-CS">
 
<contactref element="MAX1" pad="6"/>
 
<contactref element="R5" pad="1"/>
 
<contactref element="IC1" pad="25"/>
 
<wire x1="40.386" y1="33.3756" x2="41.402" y2="34.3916" width="0.254" layer="1"/>
 
<wire x1="40.386" y1="33.0708" x2="40.386" y2="30.6324" width="0.254" layer="1"/>
 
<wire x1="40.386" y1="33.0708" x2="40.386" y2="33.3756" width="0.254" layer="1"/>
 
<wire x1="40.386" y1="30.6324" x2="41.148" y2="30.5054" width="0.254" layer="1"/>
 
<wire x1="41.148" y1="30.5054" x2="41.7576" y2="30.5054" width="0.254" layer="1"/>
 
<wire x1="42.418" y1="40.894" x2="42.418" y2="44.45" width="0.254" layer="1"/>
 
<wire x1="42.418" y1="44.45" x2="37.211" y2="44.434" width="0.254" layer="1"/>
 
@@ -3239,30 +3239,30 @@ Please make sure your boards conform to
 
<wire x1="32.385" y1="38.735" x2="31.115" y2="38.735" width="0.254" layer="16"/>
 
<via x="31.115" y="38.735" extent="1-16" drill="0.3302"/>
 
<wire x1="31.115" y1="38.735" x2="31.115" y2="37.592" width="0.254" layer="1"/>
 
<wire x1="31.115" y1="37.592" x2="31.115" y2="36.83" width="0.254" layer="1"/>
 
<wire x1="31.115" y1="36.83" x2="29.972" y2="36.83" width="0.254" layer="1"/>
 
<wire x1="29.93" y1="36.855" x2="29.93" y2="36.83" width="0.4064" layer="1"/>
 
<wire x1="29.93" y1="36.83" x2="29.972" y2="36.83" width="0.4064" layer="1"/>
 
<wire x1="41.656" y1="41.91" x2="41.656" y2="43.037" width="0.254" layer="1"/>
 
<wire x1="41.656" y1="43.037" x2="41.463" y2="43.291" width="0.254" layer="1"/>
 
</signal>
 
<signal name="PUX6">
 
<contactref element="Q1" pad="3"/>
 
<contactref element="AUX" pad="9"/>
 
<wire x1="40.513" y1="41.191" x2="38.354" y2="41.191" width="0.3048" layer="1"/>
 
<wire x1="38.354" y1="41.191" x2="38.354" y2="42.545" width="0.3048" layer="1"/>
 
<wire x1="38.354" y1="42.545" x2="35.687" y2="42.545" width="0.3048" layer="1"/>
 
<wire x1="35.687" y1="42.545" x2="35.687" y2="41.656" width="0.3048" layer="1"/>
 
<wire x1="35.687" y1="41.656" x2="31.75" y2="41.656" width="0.3048" layer="1"/>
 
<contactref element="AUX" pad="9"/>
 
<wire x1="31.75" y1="41.656" x2="31.75" y2="43.18" width="0.3048" layer="1"/>
 
</signal>
 
<signal name="CST">
 
<contactref element="AUX" pad="10"/>
 
<contactref element="R7" pad="2"/>
 
<wire x1="31.623" y1="41.148" x2="20.32" y2="41.148" width="0.4064" layer="16"/>
 
<wire x1="33.655" y1="43.18" x2="31.623" y2="41.148" width="0.4064" layer="16"/>
 
<wire x1="34.29" y1="43.18" x2="33.655" y2="43.18" width="0.4064" layer="16"/>
 
<wire x1="20.32" y1="41.148" x2="20.32" y2="41.093" width="0.4064" layer="16"/>
 
</signal>
 
</signals>
 
</board>
ZonCoffeeTiny.sch
➞
Show inline comments
 
<?xml version="1.0" encoding="utf-8"?>
 
<!DOCTYPE eagle SYSTEM "eagle.dtd">
 
<eagle version="6.0">
 
<eagle version="6.2">
 
<drawing>
 
<settings>
 
<setting alwaysvectorfont="no"/>
 
<setting verticaltext="up"/>
 
</settings>
 
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
 
<layers>
 
<layer number="1" name="Top" color="4" fill="1" visible="no" active="no"/>
 
<layer number="2" name="Route2" color="1" fill="3" visible="no" active="no"/>
 
<layer number="3" name="Route3" color="4" fill="3" visible="no" active="no"/>
 
<layer number="4" name="Route4" color="1" fill="4" visible="no" active="no"/>
 
<layer number="5" name="Route5" color="4" fill="4" visible="no" active="no"/>
 
@@ -16195,42 +16195,40 @@ Source: http://www.bourns.com/data/globa
 
<part name="GND4" library="supply1" deviceset="GND" device=""/>
 
<part name="R7" library="pot" deviceset="TRIM_EU-" device="3223W" value="10k"/>
 
<part name="P+6" library="supply1" deviceset="VCC" device=""/>
 
<part name="GND10" library="supply1" deviceset="GND" device=""/>
 
</parts>
 
<sheets>
 
<sheet>
 
<plain>
 
<wire x1="444.5" y1="134.62" x2="444.5" y2="86.36" width="0.3048" layer="94"/>
 
<wire x1="444.5" y1="86.36" x2="444.5" y2="-15.24" width="0.3048" layer="94"/>
 
<wire x1="444.5" y1="-15.24" x2="447.04" y2="-15.24" width="0.3048" layer="94"/>
 
<wire x1="447.04" y1="-15.24" x2="474.98" y2="-15.24" width="0.3048" layer="94"/>
 
<wire x1="299.72" y1="86.36" x2="276.86" y2="86.36" width="0.3048" layer="94"/>
 
<wire x1="276.86" y1="86.36" x2="226.06" y2="86.36" width="0.3048" layer="94"/>
 
<wire x1="299.72" y1="86.36" x2="226.06" y2="86.36" width="0.3048" layer="94"/>
 
<wire x1="299.72" y1="86.36" x2="299.72" y2="17.78" width="0.3048" layer="94"/>
 
<wire x1="299.72" y1="17.78" x2="299.72" y2="-15.24" width="0.3048" layer="94"/>
 
<wire x1="299.72" y1="-15.24" x2="299.72" y2="-50.8" width="0.3048" layer="94"/>
 
<wire x1="373.38" y1="-15.24" x2="299.72" y2="-15.24" width="0.3048" layer="94"/>
 
<wire x1="226.06" y1="17.78" x2="299.72" y2="17.78" width="0.1524" layer="94"/>
 
<wire x1="447.04" y1="-15.24" x2="373.38" y2="-15.24" width="0.3048" layer="94"/>
 
<wire x1="444.5" y1="-15.24" x2="299.72" y2="-15.24" width="0.3048" layer="94"/>
 
<wire x1="299.72" y1="86.36" x2="444.5" y2="86.36" width="0.1524" layer="94"/>
 
<text x="241.3" y="5.08" size="1.778" layer="94">Ethan Zonca - Jan 2011</text>
 
<text x="236.22" y="-7.62" size="1.778" layer="94">Todo:</text>
 
<text x="238.76" y="-17.78" size="1.778" layer="94">Label some SMD components?</text>
 
<text x="452.12" y="129.54" size="3.81" layer="94" ratio="13">Ports</text>
 
<text x="238.76" y="124.46" size="3.81" layer="94" ratio="13">Passives</text>
 
<text x="243.84" y="73.66" size="3.81" layer="94" ratio="13">Additional ICs</text>
 
<text x="314.96" y="-40.64" size="3.81" layer="94" ratio="5">September 2011</text>
 
<text x="322.58" y="-40.64" size="3.81" layer="94" ratio="5">May 2012</text>
 
<text x="307.34" y="-30.48" size="5.08" layer="94">ethanzonca.com</text>
 
<text x="375.92" y="-25.4" size="6.4516" layer="94" ratio="9">Unreviewed</text>
 
<text x="375.92" y="-25.4" size="6.4516" layer="94" ratio="9">Parallel LCD Mod</text>
 
<text x="466.09" y="-44.45" size="3.81" layer="94" ratio="5">1</text>
 
<text x="238.76" y="-12.7" size="1.778" layer="94">Note that XTAL is optional</text>
 
<text x="238.76" y="-22.86" size="1.778" layer="94">Pins for HD44780</text>
 
<text x="243.84" y="-27.94" size="1.778" layer="94">Backlight</text>
 
<text x="243.84" y="-33.02" size="1.778" layer="94">Contrast - trimpot?</text>
 
</plain>
 
<instances>
 
<instance part="R1" gate="G$1" x="345.44" y="50.8"/>
 
<instance part="R2" gate="G$1" x="360.68" y="48.26"/>
 
<instance part="V1" gate="+5V" x="327.66" y="71.12"/>
 
<instance part="GND1" gate="1" x="327.66" y="35.56"/>
 
<instance part="L1" gate="G$1" x="330.2" y="60.96" rot="R90"/>
0 comments (0 inline, 0 general)
Server instance: zserverv-26437 This site is powered by Kallithea, which is © 2010–2021 by various authors & licensed under GPLv3. – Support