diff --git a/CAM/therm.gpi b/CAM/therm.gpi
new file mode 100644
--- /dev/null
+++ b/CAM/therm.gpi
@@ -0,0 +1,58 @@
+Generated by EAGLE CAM Processor 7.3.0
+
+Photoplotter Info File: /home/ethanzonca/Projects/ZonCoffeeOLED/CAM/therm.gpi
+
+ Date              : 23 Aug 2015 21:41:41
+ Plotfile          : /home/ethanzonca/Projects/ZonCoffeeOLED/CAM/therm.GTL
+ Apertures         : generated: 
+ Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
+
+Parameter settings:
+
+ Emulate Apertures : no
+ Tolerance Draw  + :  0.00 %
+ Tolerance Draw  - :  0.00 %
+ Tolerance Flash + :  0.00 %
+ Tolerance Flash - :  0.00 %
+ Rotate            : no
+ Mirror            : no
+ Optimize          : yes
+ Auto fit          : yes
+ OffsetX           : 0inch
+ OffsetY           : 0inch
+
+Plotfile Info:
+
+ Coordinate Format : 2.5
+ Coordinate Units  : Inch
+ Data Mode         : Absolute
+ Zero Suppression  : None
+ End Of Block      : *
+
+Apertures used:
+
+ Code     Shape     Size                  used
+
+ D10      draw      0.0000inch              62
+ D11      rectangle 0.0728inch x 0.0433inch     6
+ D12      rectangle 0.0787inch x 0.0748inch     2
+ D13      rectangle 0.0551inch x 0.0138inch     5
+ D14      rectangle 0.0748inch x 0.0709inch     2
+ D15      square    0.0748inch               2
+ D16      rectangle 0.0217inch x 0.0472inch     5
+ D17      draw      0.0118inch               2
+ D18      square    0.0600inch               6
+ D19      rectangle 0.0394inch x 0.0433inch     2
+ D20      rectangle 0.0354inch x 0.0276inch     2
+ D21      rectangle 0.0276inch x 0.0354inch    26
+ D22      rectangle 0.0197inch x 0.0571inch    16
+ D23      rectangle 0.0571inch x 0.0197inch    16
+ D24      rectangle 0.0295inch x 0.0118inch    10
+ D25      rectangle 0.0118inch x 0.0295inch    10
+ D26      square    0.0984inch               1
+ D27      draw      0.0160inch            1043
+ D28      round     0.0250inch              75
+ D29      draw      0.0080inch             191
+ D30      draw      0.0120inch              58
+ D31      draw      0.0100inch               3
+