diff --git a/CAM/zoncoffee.gpi b/CAM/zoncoffee.gpi
--- a/CAM/zoncoffee.gpi
+++ b/CAM/zoncoffee.gpi
@@ -1,58 +1,54 @@
-Generated by EAGLE CAM Processor 6.4.0
-
-Photoplotter Info File: C:/repos/ZonCoffee-Hardware/CAM/zoncoffee.gpi
-
- Date              : 6/12/2014 2:08:34 PM
- Plotfile          : C:/repos/ZonCoffee-Hardware/CAM/zoncoffee.GTL
- Apertures         : generated: 
- Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch
-
-Parameter settings:
-
- Emulate Apertures : no
- Tolerance Draw  + :  0.00 %
- Tolerance Draw  - :  0.00 %
- Tolerance Flash + :  0.00 %
- Tolerance Flash - :  0.00 %
- Rotate            : no
- Mirror            : no
- Optimize          : yes
- Auto fit          : yes
- OffsetX           : 0inch
- OffsetY           : 0inch
-
-Plotfile Info:
-
- Coordinate Format : 2.4
- Coordinate Units  : Inch
- Data Mode         : Absolute
- Zero Suppression  : None
- End Of Block      : *
-
-Apertures used:
-
- Code     Shape     Size                  used
-
- D10      draw      0.0000inch               6
- D11      rectangle 0.0276inch x 0.0354inch    30
- D12      rectangle 0.0433inch x 0.0728inch     6
- D13      rectangle 0.0748inch x 0.0787inch     2
- D14      rectangle 0.0551inch x 0.0138inch     5
- D15      rectangle 0.0748inch x 0.0709inch     2
- D16      square    0.0748inch               2
- D17      rectangle 0.0236inch x 0.0610inch     8
- D18      rectangle 0.0217inch x 0.0472inch     5
- D19      rectangle 0.0091inch x 0.0236inch    24
- D20      rectangle 0.0236inch x 0.0091inch    24
- D21      square    0.2205inch               1
- D22      draw      0.0118inch               4
- D23      square    0.0600inch               6
- D24      rectangle 0.0276inch x 0.0197inch     2
- D25      rectangle 0.0354inch x 0.0276inch     6
- D26      rectangle 0.0354inch x 0.0315inch     4
- D27      round     0.0350inch               2
- D28      rectangle 0.0355inch x 0.0180inch     8
- D29      draw      0.0080inch             361
- D30      round     0.0240inch              58
- D31      round     0.0270inch               1
-
+Generated by EAGLE CAM Processor 6.5.0
+
+Photoplotter Info File: /home/ethanzonca/Projects/ZonCoffeeOLED/CAM/zoncoffee.gpi
+
+ Date              : 10 Nov 2014 22:31:30
+ Plotfile          : /home/ethanzonca/Projects/ZonCoffeeOLED/CAM/zoncoffee.GTL
+ Apertures         : generated: 
+ Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch
+
+Parameter settings:
+
+ Emulate Apertures : no
+ Tolerance Draw  + :  0.00 %
+ Tolerance Draw  - :  0.00 %
+ Tolerance Flash + :  0.00 %
+ Tolerance Flash - :  0.00 %
+ Rotate            : no
+ Mirror            : no
+ Optimize          : yes
+ Auto fit          : yes
+ OffsetX           : 0inch
+ OffsetY           : 0inch
+
+Plotfile Info:
+
+ Coordinate Format : 2.4
+ Coordinate Units  : Inch
+ Data Mode         : Absolute
+ Zero Suppression  : None
+ End Of Block      : *
+
+Apertures used:
+
+ Code     Shape     Size                  used
+
+ D10      draw      0.0000inch              58
+ D11      rectangle 0.0276inch x 0.0354inch    18
+ D12      rectangle 0.0728inch x 0.0433inch     6
+ D13      rectangle 0.0787inch x 0.0748inch     2
+ D14      rectangle 0.0551inch x 0.0138inch     5
+ D15      rectangle 0.0748inch x 0.0709inch     2
+ D16      square    0.0748inch               2
+ D17      rectangle 0.0236inch x 0.0610inch     8
+ D18      rectangle 0.0217inch x 0.0472inch     5
+ D19      draw      0.0118inch              34
+ D20      square    0.0600inch               8
+ D21      rectangle 0.0276inch x 0.0197inch     2
+ D22      rectangle 0.0354inch x 0.0276inch     2
+ D23      draw      0.0138inch               1
+ D24      rectangle 0.0276inch x 0.0177inch     8
+ D25      draw      0.0080inch             230
+ D26      round     0.0240inch              55
+ D27      round     0.0220inch               1
+