>NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR chip >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 2.5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 3 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 4 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 5 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm, outline 6 x 5 mm >NAME >VALUE CAPACITOR grid 2.5 mm + 5 mm, outline 2.4 x 7 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 2.5 + 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.4 x 4.4 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 2.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 4.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 5.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR Horizontal, grid 5 mm, outline 7.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 3.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 4.2 x 10.3 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 5.2 x 10.6 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 4.3 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 5.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm, outline 6.4 x 13.3 mm >NAME >VALUE CAPACITOR grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 5.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 6.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 7.2 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 8.4 x 18.3 mm >NAME >VALUE CAPACITOR grid 15 mm, outline 9.1 x 18.2 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 6.2 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 7.4 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 8.7 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 10.8 x 26.8 mm >NAME >VALUE CAPACITOR grid 22.5 mm, outline 11.3 x 26.8 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 9.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 11.3 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 13.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 20.5 x 31.6 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 13.7 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 16.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 32.5 mm, outline 18.2 x 37.4 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 19.2 x 41.8 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 20.3 x 41.8 mm >NAME >VALUE CAPACITOR grid 5 mm, outline 3.5 x 7.5 mm >NAME >VALUE CAPACITOR grid 37.5 mm, outline 15.5 x 41.8 mm >NAME >VALUE CAPACITOR grid 7.5 mm, outline 6.3 x 10.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 15.4 x 31.6 mm >NAME >VALUE CAPACITOR grid 27.5 mm, outline 17.3 x 31.6 mm >NAME >VALUE Ceramic Chip Capacitor KEMET 0204 Reflow solder Metric Code Size 1005 >NAME >VALUE Ceramic Chip Capacitor KEMET 0603 Reflow solder Metric Code Size 1608 >NAME >VALUE Ceramic Chip Capacitor KEMET 0805 Reflow solder Metric Code Size 2012 >NAME >VALUE Ceramic Chip Capacitor KEMET 1206 Reflow solder Metric Code Size 3216 >NAME >VALUE Ceramic Chip Capacitor KEMET 1210 Reflow solder Metric Code Size 3225 >NAME >VALUE Ceramic Chip Capacitor KEMET 1812 Reflow solder Metric Code Size 4532 >NAME >VALUE Ceramic Chip Capacitor KEMET 1825 Reflow solder Metric Code Size 4564 >NAME >VALUE Ceramic Chip Capacitor KEMET 2220 Reflow solder Metric Code Size 5650 >NAME >VALUE Ceramic Chip Capacitor KEMET 2225 Reflow solder Metric Code Size 5664 >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR chip >NAME >VALUE RESISTOR chip, wave soldering >NAME >VALUE RESISTOR MELF 0.10 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.12 W >NAME >VALUE RESISTOR MELF 0.10 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR MELF 0.12 W >NAME >VALUE RESISTOR MELF 0.25 W >NAME >VALUE RESISTOR type 0204, grid 5 mm >NAME >VALUE RESISTOR type 0204, grid 7.5 mm >NAME >VALUE RESISTOR type 0207, grid 10 mm >NAME >VALUE RESISTOR type 0207, grid 12 mm >NAME >VALUE RESISTOR type 0207, grid 15mm >NAME >VALUE RESISTOR type 0207, grid 2.5 mm >NAME >VALUE RESISTOR type 0207, grid 5 mm >NAME >VALUE RESISTOR type 0207, grid 7.5 mm >NAME >VALUE RESISTOR type 0309, grid 10mm >NAME >VALUE RESISTOR type 0309, grid 12.5 mm >NAME >VALUE RESISTOR type 0411, grid 12.5 mm >NAME >VALUE RESISTOR type 0411, grid 15 mm >NAME >VALUE RESISTOR type 0411, grid 3.81 mm >NAME >VALUE RESISTOR type 0414, grid 15 mm >NAME >VALUE RESISTOR type 0414, grid 5 mm >NAME >VALUE RESISTOR type 0617, grid 17.5 mm >NAME >VALUE RESISTOR type 0617, grid 22.5 mm >NAME >VALUE RESISTOR type 0617, grid 5 mm >NAME >VALUE RESISTOR type 0922, grid 22.5 mm >NAME >VALUE RESISTOR type 0613, grid 5 mm >NAME >VALUE RESISTOR type 0613, grid 15 mm >NAME >VALUE RESISTOR type 0817, grid 22.5 mm >NAME >VALUE 0817 RESISTOR type 0817, grid 6.35 mm >NAME >VALUE 0817 RESISTOR type V234, grid 12.5 mm >NAME >VALUE RESISTOR type V235, grid 17.78 mm >NAME >VALUE RESISTOR type V526-0, grid 2.5 mm >NAME >VALUE Mini MELF 0102 Axial >NAME >VALUE RESISTOR type 0922, grid 7.5 mm >NAME >VALUE 0922 CECC Size RC2211 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC2211 Wave Soldering source Beyschlag >NAME >VALUE CECC Size RC3715 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC3715 Wave Soldering source Beyschlag >NAME >VALUE CECC Size RC6123 Reflow Soldering source Beyschlag >NAME >VALUE CECC Size RC6123 Wave Soldering source Beyschlag >NAME >VALUE RESISTOR type RDH, grid 15 mm >NAME >VALUE RDH RESISTOR type 0204, grid 2.5 mm >NAME >VALUE RESISTOR type 0309, grid 2.5 mm >NAME >VALUE >NAME >VALUE Surface Mount USB Mini-B Connector >NAME >VALUE Mini USB 5-pin thru-mount connector 4Ucon #18732 >NAME >VALUE >NAME >VALUE Multilayer SMD >VALUE >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME HELLO WORLD! HD44780 LCD >NAME >VALUE CAPACITOR, American symbol RESISTOR, American symbol USB Connectors USBMINIB - Surface Mount Female Mini-B USB Connector 4UConnector: 06564 By microbuilder.eu Thru-hole RA Female Mini-B USB Connector 4UConnector: 18732 By ladyada.net PTC fuses, resettable thermistors HD44780 LCD Standard character type LCDs, available in sizes from 8x1 to 40x4! Solder jumper >NAME >VALUE Solder jumper >NAME >VALUE >NAME >VALUE SMD solder JUMPER LED 5 mm, round >NAME >VALUE LED 3 mm, round >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE 2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring. >Name >Value + - >Name >Value >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE SOT-23 >NAME >VALUE >NAME >VALUE TO 92 >NAME >VALUE SOT-223 >NAME >VALUE >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE >Name >Value >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE >NAME >VALUE CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF >NAME >VALUE <h3>CAP-PTH-SMALL-KIT</h3> Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571). Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value RESISTOR chip >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE 1/6W Thru-hole Resistor - *UNPROVEN* >NAME >VALUE >NAME >VALUE 1/4W Resistor, 0.4" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1/2W Resistor, 0.5" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1W Resistor, 0.6" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 2W Resistor, 0.8" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value <h3>AXIAL-0.3-KIT</h3> Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes. Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE Date: >LAST_DATE_TIME Sheet: >SHEET REV: TITLE: Document Number: >DRAWING_NAME >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE MOSI RESET SCK MISO +5 GND >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME Schematic Frame Standard 8.5x11 US Letter frame LEDs Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. 5mm - Spark Fun Electronics SKU : COM-00529 (and others) Header 2 Standard 2-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08233 with associated crimp pins and housings. Header 3 Standard 3-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08232 with associated crimp pins and housings. Header 4 Standard 4-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. AVR ISP 6 Pin This is the reduced ISP connector for AVR programming. Common on Arduino. This footprint will take up less PCB space and can be used with a 10-pin to 6-pin adapter such as SKU: BOB-08508 Transistor NPN BJT configuration in SOT23 package. MMBT2222 is the common NPN we use. Double check BCE configuration again layout. Capacitor Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. Resistor Basic schematic elements and footprints for 0603, 1206, and PTH resistors. Reference Package Small Outline IC >NAME >VALUE >NAME >VALUE MAX31855 Resistors, Capacitors, Inductors Based on the previous libraries: <ul> <li>r.lbr <li>cap.lbr <li>cap-fe.lbr <li>captant.lbr <li>polcap.lbr <li>ipc-smd.lbr </ul> All SMD packages are defined according to the IPC specifications and CECC <author>Created by librarian@cadsoft.de</author> for Electrolyt Capacitors see also : www.bccomponents.com www.panasonic.com www.kemet.com for trimmer refence see : www.electrospec-inc.com/cross_references/trimpotcrossref.asp <map name="nav_main"> <area shape="rect" coords="0,1,140,23" href="../military_specs.asp" title=""> <area shape="rect" coords="0,24,140,51" href="../about.asp" title=""> <area shape="rect" coords="1,52,140,77" href="../rfq.asp" title=""> <area shape="rect" coords="0,78,139,103" href="../products.asp" title=""> <area shape="rect" coords="1,102,138,128" href="../excess_inventory.asp" title=""> <area shape="rect" coords="1,129,138,150" href="../edge.asp" title=""> <area shape="rect" coords="1,151,139,178" href="../industry_links.asp" title=""> <area shape="rect" coords="0,179,139,201" href="../comments.asp" title=""> <area shape="rect" coords="1,203,138,231" href="../directory.asp" title=""> <area shape="default" nohref> </map> <html> <title></title> <LINK REL="StyleSheet" TYPE="text/css" HREF="style-sheet.css"> <body bgcolor="#ffffff" text="#000000" marginwidth="0" marginheight="0" topmargin="0" leftmargin="0"> <table border=0 cellspacing=0 cellpadding=0 width="100%" cellpaddding=0 height="55%"> <tr valign="top"> </td> <! <td width="10"> </td> <td width="90%"> TRIM-POT CROSS REFERENCE <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=2> <TR> <TD COLSPAN=8> RECTANGULAR MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURNS </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD><TD> </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3005P 3006P 3006W 3006Y 3009P 3009W 3009Y 3057J 3057L 3057P 3057Y 3059J 3059L 3059P 3059Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 89P 89W 89X 89PH 76P 89XH 78SLT 78L ALT 56P ALT 78P ALT T8S 78L 56P 78P </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - T18/784 783 781 - - - 2199 1697/1897 1680/1880 2187 - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 8035EKP/CT20/RJ-20P - RJ-20X - - - 1211L 8012EKQ ALT 8012EKR ALT 1211P 8012EKJ 8012EKL 8012EKQ 8012EKR </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 2101P 2101W 2101Y - - - - - - - - 2102L 2102S 2102Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVMCOG - - - - - - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 43P 43W 43Y - - - - 40L 40P 40Y 70Y-T602 70L 70P 70Y </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - RT/RTR12 RT/RTR12 RT/RTR12 - RJ/RJR12 RJ/RJR12 RJ/RJR12 </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SQUARE MULTI-TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3250L 3250P 3250W 3250X 3252P 3252W 3252X 3260P 3260W 3260X 3262P 3262W 3262X 3266P 3266W 3266X 3290H 3290P 3290W 3292P 3292W 3292X 3296P 3296W 3296X 3296Y 3296Z 3299P 3299W 3299X 3299Y 3299Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - 66P ALT 66W ALT 66X ALT 66P ALT 66W ALT 66X ALT - 64W ALT - 64P ALT 64W ALT 64X ALT 64P 64W 64X 66X ALT 66P ALT 66W ALT 66P 66W 66X 67P 67W 67X 67Y 67Z 68P 68W 68X 67Y ALT 67Z ALT </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 5050 5091 5080 5087 - - - - - - - T63YB T63XB - - - 5887 5891 5880 - - - T93Z T93YA T93XA T93YB T93XB - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 8026EKP 8026EKW 8026EKM 8026EKP 8026EKB 8026EKM 1309X 1309P 1309W 8024EKP 8024EKW 8024EKN RJ-9P/CT9P RJ-9W RJ-9X - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - 3103P 3103Y 3103Z 3103P 3103Y 3103Z - - - - - - 3105P/3106P 3105W/3106W 3105X/3106X 3105Y/3106Y 3105Z/3105Z 3102P 3102W 3102X 3102Y 3102Z </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - - - - - - - - - - - - - - - - - EVMCBG EVMCCG - - - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 55-1-X 55-4-X 55-3-X 55-2-X - - - - - - - - - - - - 50-2-X 50-4-X 50-3-X - - - 64P 64W 64X 64Y 64Z - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> RT/RTR22 RT/RTR22 RT/RTR22 RT/RTR22 RJ/RJR22 RJ/RJR22 RJ/RJR22 RT/RTR26 RT/RTR26 RT/RTR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RJ/RJR26 RT/RTR24 RT/RTR24 RT/RTR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 RJ/RJR24 - - - - - - - </TD> </TR> <TR> <TD COLSPAN=8>  </TD> </TR> <TR> <TD COLSPAN=8> SINGLE TURN </TD> </TR> <TR> <TD ALIGN=CENTER> BOURN </TD> <TD ALIGN=CENTER> BI TECH </TD> <TD ALIGN=CENTER> DALE-VISHAY </TD> <TD ALIGN=CENTER> PHILIPS/MEPCO </TD> <TD ALIGN=CENTER> MURATA </TD> <TD ALIGN=CENTER> PANASONIC </TD> <TD ALIGN=CENTER> SPECTROL </TD> <TD ALIGN=CENTER> MILSPEC </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3323P 3323S 3323W 3329H 3329P 3329W 3339H 3339P 3339W 3352E 3352H 3352K 3352P 3352T 3352V 3352W 3362H 3362M 3362P 3362R 3362S 3362U 3362W 3362X 3386B 3386C 3386F 3386H 3386K 3386M 3386P 3386S 3386W 3386X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 25P 25S 25RX 82P 82M 82PA - - - 91E 91X 91T 91B 91A 91V 91W 25W 25V 25P - 25S 25U 25RX 25X 72XW 72XL 72PM 72RX - 72PX 72P 72RXW 72RXL 72X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - T7YB T7YA - - - - - - - - - - - - TXD TYA TYP - TYD TX - 150SX 100SX 102T 101S 190T 150TX 101 - - 101SX </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ET6P ET6S ET6X RJ-6W/8014EMW RJ-6P/8014EMP RJ-6X/8014EMX TM7W TM7P TM7X - 8017SMS - 8017SMB 8017SMA - - CT-6W CT-6H CT-6P CT-6R - CT-6V CT-6X - - 8038EKV - 8038EKX - - 8038EKP 8038EKZ 8038EKW - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 3321H 3321P 3321N 1102H 1102P 1102T RVA0911V304A - RVA0911H413A RVG0707V100A RVA0607V(H)306A RVA1214H213A - - - - - - - - - 3104B 3104C 3104F 3104H - 3104M 3104P 3104S 3104W 3104X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> EVMQ0G EVMQIG EVMQ3G EVMS0G EVMQ0G EVMG0G - - - EVMK4GA00B EVM30GA00B EVMK0GA00B EVM38GA00B EVMB6 EVLQ0 - EVMMSG EVMMBG EVMMAG - - EVMMCS - - - - - EVMM1 - - EVMM0 - - EVMM3 </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - 62-3-1 62-1-2 - - - - - - - - - - - 67R - 67P - - - - 67X 63V 63S 63M - - 63H 63P - - 63X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - RJ/RJR50 RJ/RJR50 RJ/RJR50 - - - - - - - - - - - - - - - - - - - - - - - - - - - - </TD> </TR> </TABLE>   <TABLE BORDER=0 CELLSPACING=1 CELLPADDING=3> <TR> <TD COLSPAN=7> SMD TRIM-POT CROSS REFERENCE MULTI-TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3224G 3224J 3224W 3269P 3269W 3269X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 44G 44J 44W 84P 84W 84X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST63Z ST63Y - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - ST5P ST5W ST5X </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - - - - - </TD> </TR> <TR> <TD COLSPAN=7>  </TD> </TR> <TR> <TD COLSPAN=7> SINGLE TURN </TD> </TR> <TR> <TD> BOURNS </TD> <TD> BI TECH </TD> <TD> DALE-VISHAY </TD> <TD> PHILIPS/MEPCO </TD> <TD> PANASONIC </TD> <TD> TOCOS </TD> <TD> AUX/KYOCERA </TD> </TR> <TR> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 3314G 3314J 3364A/B 3364C/D 3364W/X 3313G 3313J </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> 23B 23A 21X 21W - 22B 22A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST5YL/ST53YL ST5YJ/5T53YJ ST-23A ST-22B ST-22 - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> ST-4B ST-4A - - - ST-3B ST-3A </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - EVM-6YS EVM-1E EVM-1G EVM-1D - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> G4B G4A TR04-3S1 TRG04-2S1 - - - </TD> <TD BGCOLOR="#cccccc" ALIGN=CENTER> - - DVR-43A CVR-42C CVR-42A/C - - </TD> </TR> </TABLE> ALT = ALTERNATE   </td> </tr> </table> </BODY></HTML> Trimm resistor BOURNS 0,1W 25% >NAME >VALUE Trimm resistor MEGGIT >NAME >VALUE Trimm resistor MEGGIT >NAME >VALUE Trimm resistor BOURNS 0,25W, 20% >NAME >VALUE Trimm resistor VISHAY >NAME >VALUE Trimm resistor AVX >NAME >VALUE Trimm resistor BOURNS SMD Cermet trimmer >NAME >VALUE Trimm resistor BOURNS Side Adjust >NAME >VALUE Trimm resistor BOURNS Side Adjust >NAME >VALUE Trimm resistor BOURNS Top Adjust >NAME >VALUE Trimm resistor MEGGIT >NAME >VALUE Trimm resistor Spectrol abgedichtet nach IP67 >NAME >VALUE Trimm resistor Spectrol abgedichtet nach IP67 >NAME >VALUE Trimm resistor VISHAY abgedichtet nach IP67 >NAME >VALUE Trimm resistor VISHAY abgedichtet nach IP67 >NAME >VALUE Trimm resistror VISHAY seales container, solder immerson IP67 >NAME >VALUE Trimm resistror VISHAY seales container, solder immerson IP67 >NAME >VALUE Trimm resistror VISHAY seales container, solder immerson IP67 >NAME >VALUE Trimm resistor BOURNS >NAME >VALUE Trimm resistor BOURNS >NAME >VALUE Trimm resistor BOURNS >NAME >VALUE Trimm resistor BOURNS >NAME >VALUE Trimm resistor Spectrol >NAME >VALUE Trimm resistor Spectrol >NAME >VALUE Trimm resistor BOURNS Top Adjust >NAME >VALUE Trimm resistor BOURNS Cermet MIL-R-22097 >NAME >VALUE Trimm resistor Spectrol Cermet MIL-R-22097 >NAME >VALUE Trimm resistor Spectrol Cermet MIL-R-22097 >NAME >VALUE Trimm resistor Spectrol Cermet MIL-R-22097 >NAME >VALUE Trimm resistor Spectrol Cermet MIL-R-22097 >NAME >VALUE Trimm resistor Spectrol Cermet MIL-R-22097 >NAME >VALUE Trimm resistor BOURNS waschfest MIL-R-22097 >NAME >VALUE Trimm resistor Spectrol waschfest MIL-R-22097 >NAME >VALUE Trimm resistor BOURNS >NAME >VALUE Trimm resistor BOURNS >NAME >VALUE Trimm resistor Spectrol waschfest MIL-R-22097 >NAME >VALUE Trimm resistor BOURNS >NAME >VALUE Trimm resistor VISHAY abgedichtet nach IP67 >NAME >VALUE Trimm resistor VISHAY Cermet, abgedichtet nach IP67 >NAME >VALUE Trimm resistor VISHAY Cermet, abgedichtet nach IP67 >NAME >VALUE Trimm resistor VISHAY Cermet, abgedichtet nach IP67 >NAME >VALUE Trimm resistor VISHAY Cermet, abgedichtet nach IP67 >NAME >VALUE >NAME >VALUE Trimm resistor Ethan Zonca - Jan 2011 Todo: Label some SMD components? Ports Passives Thermocouple Amp May 2012 ethanzonca.com Parallel LCD Mod 1 Note that XTAL is optional Pins for HD44780 Backlight Contrast - trimpot?