Generated by EAGLE CAM Processor 6.5.0

Photoplotter Info File: /home/ethanzonca/Projects/ZonCoffee-Hardware/ZonCoffee3/CAM/ZonCoffeeTiny.gpi

 Date              : 9 Oct 2013 21:29:14
 Plotfile          : /home/ethanzonca/Projects/ZonCoffee-Hardware/ZonCoffee3/CAM/ZonCoffeeTiny.GTL
 Apertures         : generated: 
 Device            : Gerber RS-274-X photoplotter, coordinate format 2.4 inch

Parameter settings:

 Emulate Apertures : no
 Tolerance Draw  + :  0.00 %
 Tolerance Draw  - :  0.00 %
 Tolerance Flash + :  0.00 %
 Tolerance Flash - :  0.00 %
 Rotate            : no
 Mirror            : no
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Apertures used:

 Code     Shape     Size                  used

 D10      draw      0.0000inch              14
 D11      rectangle 0.0433inch x 0.0551inch    22
 D12      rectangle 0.0630inch x 0.0710inch     2
 D13      rectangle 0.0768inch x 0.0591inch     2
 D14      square    0.0472inch               2
 D15      rectangle 0.0945inch x 0.0787inch     6
 D16      rectangle 0.0591inch x 0.0197inch    22
 D17      rectangle 0.0197inch x 0.0591inch    22
 D18      rectangle 0.0909inch x 0.0197inch     5
 D19      rectangle 0.0460inch x 0.0630inch     6
 D20      rectangle 0.0472inch x 0.0551inch     2
 D21      square    0.0800inch               6
 D22      round     0.0800inch               9
 D23      square    0.0740inch               1
 D24      round     0.0740inch               7
 D25      rectangle 0.0866inch x 0.0236inch     8
 D26      rectangle 0.0906inch x 0.0630inch     2
 D27      octagon   0.0740inch               6
 D28      draw      0.0100inch             195
 D29      draw      0.0150inch               1
 D30      round     0.0250inch              30
 D31      draw      0.0160inch            2487
 D32      draw      0.0200inch              37
 D33      round     0.0270inch               1
 D34      draw      0.0120inch               5