therm-ng Changeset - 574fd84a2bf8 · protofusion repositories

Changeset - 574fd84a2bf8

Parent rev.

Child rev.

[Not reviewed]

default

0 19 0

matthewreed - 6 years ago 2018-12-30 14:46:34

Added options for number of setpoints and aux input enable

19 files changed with 238 insertions and 62 deletions:

.cproject

.settings/language.settings.xml

inc/config.h

inc/display.h

inc/pid.h

inc/pwmout.h

inc/states.h

inc/system/gpio.h

inc/thermostat.h

lib/ssd1306/ssd1306.c

lib/ssd1306/ssd1306.h

src/display.c

133

src/main.c

src/pid.c

src/pwmout.c

src/system/flash.c

src/system/gpio.c

src/system/interrupts.c

src/thermostat.c

0 comments (0 inline, 0 general)

.cproject

➞

Show inline comments

@@ @@ -26,7 +26,7 @@ @@
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.debugging.format.485776751" name="Debug format" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.debugging.format" useByScannerDiscovery="true"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.arm.target.family.1154107227" name="ARM family" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.arm.target.family" useByScannerDiscovery="false" value="ilg.gnuarmeclipse.managedbuild.cross.option.arm.target.mcpu.cortex-m4" valueType="enumerated"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.warnings.allwarn.1932872609" name="Enable all common warnings (-Wall)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.warnings.allwarn" useByScannerDiscovery="true" value="true" valueType="boolean"/>
-							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.warnings.extrawarn.747789546" name="Enable extra warnings (-Wextra)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.warnings.extrawarn" useByScannerDiscovery="true" value="true" valueType="boolean"/>
+							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.warnings.extrawarn.747789546" name="Enable extra warnings (-Wextra)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.warnings.extrawarn" useByScannerDiscovery="true" value="false" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.freestanding.1360639253" name="Assume freestanding environment (-ffreestanding)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.freestanding" useByScannerDiscovery="true" value="true" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.nomoveloopinvariants.1265121449" name="Disable loop invariant move (-fno-move-loop-invariants)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.nomoveloopinvariants" useByScannerDiscovery="true" value="true" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.lto.2018930176" name="Link-time optimizer (-flto)" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.lto" useByScannerDiscovery="true" value="false" valueType="boolean"/>
@@ @@ -44,6 +44,7 @@ @@
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.command.rm.153446908" name="Remove command" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.command.rm" useByScannerDiscovery="false" value="rm" valueType="string"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.addtools.createflash.2133363735" name="Create flash image" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.addtools.createflash" useByScannerDiscovery="false" value="true" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.addtools.printsize.737083294" name="Print size" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.addtools.printsize" useByScannerDiscovery="false" value="true" valueType="boolean"/>
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.toolchain.id.448560515" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.toolchain.id" value="1287942917" valueType="string"/>
 							<targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="ilg.gnuarmeclipse.managedbuild.cross.targetPlatform.1641379360" isAbstract="false" osList="all" superClass="ilg.gnuarmeclipse.managedbuild.cross.targetPlatform"/>
 							<builder buildPath="${workspace_loc:/S3467-MiniBuoy-BT-Sensor-Software}/Debug" id="ilg.gnuarmeclipse.managedbuild.cross.builder.1145700756" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="ilg.gnuarmeclipse.managedbuild.cross.builder">
 								<outputEntries>
@@ @@ -318,7 +319,7 @@ @@
 				</extensions>
 			</storageModule>
 			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
 				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release.1229152259" name="Release" parent="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release">
+				<configuration artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="${cross_rm} -rf" description="" id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release.1229152259" name="Release" optionalBuildProperties="" parent="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release">
 					<folderInfo id="ilg.gnuarmeclipse.managedbuild.cross.config.elf.release.1229152259." name="/" resourcePath="">
 						<toolChain id="ilg.gnuarmeclipse.managedbuild.cross.toolchain.elf.release.1940851783" name="Cross ARM GCC" superClass="ilg.gnuarmeclipse.managedbuild.cross.toolchain.elf.release">
 							<option id="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.1030714269" name="Optimization Level" superClass="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level" value="ilg.gnuarmeclipse.managedbuild.cross.option.optimization.level.size" valueType="enumerated"/>

.settings/language.settings.xml

➞

Show inline comments

@@ @@ -5,7 +5,7 @@ @@
 			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
 			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
 			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="1132583679889893188" id="ilg.gnuarmeclipse.managedbuild.cross.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT GCC Built-in Compiler Settings Cross ARM" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="-372386926437939920" id="ilg.gnuarmeclipse.managedbuild.cross.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT GCC Built-in Compiler Settings Cross ARM" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
 				<language-scope id="org.eclipse.cdt.core.gcc"/>
 				<language-scope id="org.eclipse.cdt.core.g++"/>
 			</provider>
@@ @@ -16,7 +16,7 @@ @@
 			<provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/>
 			<provider-reference id="org.eclipse.cdt.core.ReferencedProjectsLanguageSettingsProvider" ref="shared-provider"/>
 			<provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/>
-			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="1087856943379293210" id="ilg.gnuarmeclipse.managedbuild.cross.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT GCC Built-in Compiler Settings Cross ARM" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
+			<provider class="org.eclipse.cdt.managedbuilder.language.settings.providers.GCCBuiltinSpecsDetector" console="false" env-hash="-352937073990100134" id="ilg.gnuarmeclipse.managedbuild.cross.GCCBuiltinSpecsDetector" keep-relative-paths="false" name="CDT GCC Built-in Compiler Settings Cross ARM" parameter="${COMMAND} ${FLAGS} ${cross_toolchain_flags} -E -P -v -dD &quot;${INPUTS}&quot;" prefer-non-shared="true">
 				<language-scope id="org.eclipse.cdt.core.gcc"/>
 				<language-scope id="org.eclipse.cdt.core.g++"/>
 			</provider>

inc/config.h

➞

Show inline comments

@@ @@ -23,6 +23,7 @@ @@
 // Interval of PID calculations
 #define PID_PERIOD 120
 #define MAX_SETPOINTS 10
 //////////////////////////////////////////////////////
 // Other settings
@@ @@ -36,17 +37,19 @@ @@
 // Default Settings
 //////////////////////////////////////////////////////
 //TODO: add defaults for all settings
 #define DEFAULT_BOOT_TO_BREW 0
 #define DEFAULT_TEMP_UNITS TEMP_UNITS_FAHRENHEIT
 #define DEFAULT_WINDUP_GUARD 10
 #define DEFAULT_K_P 10
 #define DEFAULT_K_I 1
 #define DEFAULT_K_D 1
 #define DEFAULT_WINDUP_GUARD 300
 #define DEFAULT_K_P 100
 #define DEFAULT_K_I 2
 #define DEFAULT_K_D 0
 #define DEFAULT_TEMP_OFFSET 0
 #define DEFAULT_IGNORE_ERROR 0
 #define DEFAULT_SETPOINT_BREW 70
 #define DEFAULT_SETPOINT_STEAM 70
 #define DEFAULT_SETPOINT 70
 #define DEFAULT_HYSTERESIS 1
 #define DEFAULT_SETPOINT_COUNT 1
 #define DEFAULT_SETPOINT_AUX_SELECT_ENABLE 0
 //////////////////////////////////////////////////////

inc/display.h

➞

Show inline comments

@@ @@ -2,6 +2,11 @@ @@
 #define DISPLAY_H
 #include "states.h"
 #include "gpio.h"
 #include "ssd1306/ssd1306.h"
 #include "system/stringhelpers.h"
 #include "flash.h"
 #include "stdlib.h"
 #ifdef MAX31865_RTD_SENSOR
 #include "max31865.h"

inc/pid.h

➞

Show inline comments

@@ @@ -3,6 +3,8 @@ @@
 #include "stm32f3xx_hal.h"
 #include "states.h"
 #include "flash.h"
 #include "display.h"
 typedef struct {
 	int16_t last_pid_temp;

inc/pwmout.h

➞

Show inline comments

 #ifndef PWMOUT_H
 #define PWMOUT_H
 #include "stm32f3xx_hal.h"
 #include "gpio.h"
 #include "flash.h"
 #include "error.h"
 #define SSR_PIN GPIO_PIN_7
 #define SSR_GPIO_Port GPIOB

inc/states.h

➞

Show inline comments

@@ @@ -8,9 +8,10 @@ typedef struct { @@
     float temp;
     uint8_t state_resume;
     uint8_t state;
-    float setpoint;
+    int32_t setpoint;
     uint8_t pid_enabled;
     uint8_t error_code;
     uint8_t setpoint_index;
 } therm_status_t;
 typedef union
@@ @@ -22,14 +23,15 @@ typedef union @@
         uint32_t k_p;
         uint32_t k_i;
         uint32_t k_d;
         int32_t temp_offset;
+        int32_t temp_offset; //TODO: convert to float
         uint32_t ignore_error;
         int32_t setpoint_brew;
         int32_t setpoint_steam;
         int32_t setpoints[MAX_SETPOINTS];
         uint32_t control_mode;
         uint32_t sensor_type;
         uint32_t plant_type;
         uint32_t hysteresis;
         uint32_t setpoint_count;
         uint32_t setpoint_aux_select_enable;
     } val;
     uint16_t data[128];
@@ @@ -46,6 +48,8 @@ enum state { @@
 	STATE_SETSENSORTYPE,
     STATE_SETMODE,
     STATE_SETPLANTTYPE,
     STATE_SETSETPOINTCOUNT,
     STATE_SETSETPOINTAUXSELECTENABLE,
     STATE_SETHYSTERESIS,
     STATE_SETP,
     STATE_SETI,
@@ @@ -73,6 +77,11 @@ enum plant_type { @@
     PLANT_COOLER,
 };
 enum aux_select {
     AUX_DISABLE = 0,
     AUX_ENABLE,
 };
 enum GOTO_MODE {
 	#ifdef BOOTLOADER_SHORTCUT
 	MODE_BOOTLOADER,

inc/system/gpio.h

➞

Show inline comments

@@ @@ -35,8 +35,17 @@ @@
 #define LED_GPIO_Port GPIOB
 #define LED LED_GPIO_Port, LED_PIN
 #define AUX_INPUT_Pin GPIO_PIN_10
 #define AUX_INPUT_GPIO_Port GPIOA
 #define AUX_INPUT AUX_INPUT_GPIO_Port , AUX_INPUT_Pin
 #define AUX_RETURN_Pin GPIO_PIN_9
 #define AUX_RETURN_GPIO_Port GPIOA
 #define AUX_RETURN AUX_RETURN_GPIO_Port , AUX_RETURN_Pin
 void user_input(uint16_t* to_modify);
 void user_input_min_max(uint16_t* to_modify, uint16_t min, uint16_t max);
 void user_input_signed(int32_t* to_modify);
 void gpio_init(void);

inc/thermostat.h

➞

Show inline comments

@@ @@ -2,6 +2,10 @@ @@
 #define THERMOSTAT_H
 #include "stm32f3xx_hal.h"
 #include "flash.h"
 #include "gpio.h"
 #include "stdlib.h"
 #include "display.h"
 float thermostat_process(void);

lib/ssd1306/ssd1306.c

➞

Show inline comments

@@ @@ -326,9 +326,9 @@ void ssd1306_drawlogo() @@
 // Print a single character
 void ssd1306_drawchar(unsigned char ascii, unsigned char row, unsigned char xPos)
+{
     const unsigned char *srcPointer = (char*)-1;
+    const unsigned char *srcPointer = (unsigned char*)-1;
     srcPointer = &fontData[(ascii-32)][0];
+    srcPointer = (unsigned char*)&fontData[(ascii-32)][0];
     setStartPage(row);
     setStartColumn(xPos);
@@ @@ -407,7 +407,7 @@ void ssd1306_drawcharbig(unsigned char a @@
 // Print a string to the display
-void ssd1306_drawstring(const unsigned char *dataPtr, unsigned char row, unsigned char xPos)
 void ssd1306_drawstring(const char *dataPtr, unsigned char row, unsigned char xPos)
+{
     unsigned char *srcPointer;
@@ @@ -425,7 +425,7 @@ void ssd1306_drawstring(const unsigned c @@
 // Print a string to the display, big font
-void ssd1306_drawstringbig(const unsigned char *dataPtr, unsigned char row, unsigned char xPos)
 void ssd1306_drawstringbig(const char *dataPtr, unsigned char row, unsigned char xPos)
+{
     char *srcPointer;

lib/ssd1306/ssd1306.h

➞

Show inline comments

@@ @@ -36,8 +36,8 @@ SPI_HandleTypeDef* spi_get(); @@
 void ssd1306_init(void);
 void ssd1306_drawchar(unsigned char ascii, unsigned char row, unsigned char xPos);
 void ssd1306_drawcharbig(unsigned char ascii, unsigned char row, unsigned char xPos);
 void ssd1306_drawstring(const unsigned char *dataPtr, unsigned char row, unsigned char xPos);
 void ssd1306_drawstringbig(const unsigned char *dataPtr, unsigned char row, unsigned char xPos);
 void ssd1306_drawstring(const char *dataPtr, unsigned char row, unsigned char xPos);
 void ssd1306_drawstringbig(const char *dataPtr, unsigned char row, unsigned char xPos);
 void ssd1306_drawlogo();
 void ssd1306_clearscreen();

src/display.c

➞

Show inline comments

@@ @@ -3,10 +3,6 @@ @@
 //
 #include "display.h"
 #include "gpio.h"
 #include "ssd1306/ssd1306.h"
 #include "system/stringhelpers.h"
 #include "flash.h"
 // Private function prototypes
 static void draw_setpoint(therm_status_t* status);
@@ @@ -30,9 +26,8 @@ static uint8_t sw_right_last = 0; @@
 // States
 static uint8_t trigger_drawsetpoint = 1;
 static int16_t last_temp = 21245;
 static int16_t last_temp_frac = 21245;
 static int16_t last_state = 123;
 static float last_temp = 21245;
 static int16_t last_state = STATE_RESET;
 static uint8_t goto_mode = MODE_HEAT;
 static uint8_t reset_mode = RESET_REBOOT;
@@ @@ -72,6 +67,8 @@ void display_process(void) @@
     uint8_t sw_left = !HAL_GPIO_ReadPin(SW_LEFT);
     uint8_t sw_right = !HAL_GPIO_ReadPin(SW_RIGHT);
     uint8_t aux_input = !HAL_GPIO_ReadPin(AUX_INPUT);
     switch(status->state)
+    {
         // Idle state
@@ @@ -157,7 +154,6 @@ void display_process(void) @@
                 goto_mode--;
+            }
             // Event Handler
             // N/A
@@ @@ -246,10 +242,7 @@ void display_process(void) @@
             // Button handler
             if(SW_BTN_PRESSED) {
                 if(set->val.control_mode == MODE_PID)
                     status->state = STATE_SETP;
                 else
                     status->state = STATE_SETHYSTERESIS;
                 status->state = STATE_SETSETPOINTCOUNT;
+            }
             else if (!HAL_GPIO_ReadPin(SW_UP)) {
                 set->val.plant_type = PLANT_COOLER;
@@ @@ -263,6 +256,86 @@ void display_process(void) @@
         } break;
         case STATE_SETSETPOINTCOUNT:
+        {
             // Write text to OLED
             // [ therm :: number of setpoints ]
             // [ p = 12         ]
             ssd1306_drawstring("Num Setpoints", 0, 40);
             ssd1306_drawlogo();
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
             snprintf(tempstr, 12, "%ld ", set->val.setpoint_count);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 if (set->val.setpoint_count > 1)
+                {
                     status->state = STATE_SETSETPOINTAUXSELECTENABLE;
+                }
                 else
+                {
                     if(set->val.control_mode == MODE_PID)
                         status->state = STATE_SETP;
                     else
                         status->state = STATE_SETHYSTERESIS;
+                }
+            }
             else {
                 user_input_min_max((uint16_t*)&set->val.setpoint_count, 1, MAX_SETPOINTS);
                 //update setpoint index to the new maximum
                 if (status->setpoint_index >= set->val.setpoint_count)
+                {
                     status->setpoint_index = set->val.setpoint_count - 1;
+                }
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETSETPOINTAUXSELECTENABLE:
+        {
             // Write text to OLED
             // [ therm :: set p ]
             // [ p = 12         ]
             ssd1306_drawstring("Aux Select", 0, 40);
             ssd1306_drawlogo();
             ssd1306_drawchar(updown(), 1, 52);
             if(set->val.setpoint_aux_select_enable == AUX_ENABLE)
                 ssd1306_drawstring("Enable ", 1, 60);
             else
                 ssd1306_drawstring("Disable", 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 if(set->val.control_mode == MODE_PID)
                     status->state = STATE_SETP;
                 else
                     status->state = STATE_SETHYSTERESIS;
+            }
             else if (!HAL_GPIO_ReadPin(SW_UP)) {
                 set->val.setpoint_aux_select_enable = AUX_ENABLE;
+            }
             else if(!HAL_GPIO_ReadPin(SW_DOWN)) {
                 set->val.setpoint_aux_select_enable = AUX_DISABLE;
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETP:
@@ @@ -276,7 +349,7 @@ void display_process(void) @@
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
-            snprintf(tempstr, 12, "P=%d", set->val.k_p);
+            snprintf(tempstr, 12, "P=%ld", set->val.k_p);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
@@ @@ -304,7 +377,7 @@ void display_process(void) @@
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
-            snprintf(tempstr, 12, "I=%d", set->val.k_i);
+            snprintf(tempstr, 12, "I=%ld", set->val.k_i);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
@@ @@ -333,7 +406,7 @@ void display_process(void) @@
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
-            snprintf(tempstr, 12, "D=%d", set->val.k_d);
+            snprintf(tempstr, 12, "D=%ld", set->val.k_d);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
@@ @@ -362,7 +435,7 @@ void display_process(void) @@
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
-            snprintf(tempstr, 12, "H=%d", set->val.hysteresis);
+            snprintf(tempstr, 12, "H=%ld", set->val.hysteresis);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
@@ @@ -392,7 +465,7 @@ void display_process(void) @@
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
-            snprintf(tempstr, 12, "G=%d", set->val.windup_guard);
+            snprintf(tempstr, 12, "G=%ld", set->val.windup_guard);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
@@ @@ -490,7 +563,7 @@ void display_process(void) @@
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
-            snprintf(tempstr, 12, "O=%d", set->val.temp_offset);
+            snprintf(tempstr, 12, "O=%ld", set->val.temp_offset);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
@@ @@ -524,15 +597,29 @@ void display_process(void) @@
             draw_setpoint(status);
             status->pid_enabled = 1;
-            status->setpoint = set->val.setpoint_brew;
+            status->setpoint = set->val.setpoints[status->setpoint_index];
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_IDLE;
                 flash_savesettings();
+            }
             else if (!(set->val.setpoint_aux_select_enable) && SW_LEFT_PRESSED)
+            {
                 if (status->setpoint_index > 0)
+                {
                     status->setpoint_index--;
+                }
+            }
             else if (!(set->val.setpoint_aux_select_enable) && SW_RIGHT_PRESSED)
+            {
                 if (status->setpoint_index < (set->val.setpoint_count - 1))
+                {
                     status->setpoint_index++;
+                }
+            }
             else {
-                user_input_signed(&set->val.setpoint_brew);
+                user_input_signed(&set->val.setpoints[status->setpoint_index]);
+            }
             // Event Handler
@@ @@ -540,6 +627,15 @@ void display_process(void) @@
                 status->state = STATE_MAINTAIN;
+            }
             if(set->val.setpoint_aux_select_enable && aux_input)
+            {
                 status->setpoint_index = 1;
+            }
             else if(set->val.setpoint_aux_select_enable && !aux_input)
+            {
                 status->setpoint_index = 0;
+            }
         } break;
         case STATE_MAINTAIN:
@@ @@ -555,15 +651,29 @@ void display_process(void) @@
             draw_setpoint(status);
             status->pid_enabled = 1;
-            status->setpoint = set->val.setpoint_brew;
+            status->setpoint = set->val.setpoints[status->setpoint_index];
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_IDLE;
                 flash_savesettings();
+            }
             else if (!(set->val.setpoint_aux_select_enable) && SW_LEFT_PRESSED)
+            {
                 if (status->setpoint_index > 0)
+                {
                     status->setpoint_index--;
+                }
+            }
             else if (!(set->val.setpoint_aux_select_enable) && SW_RIGHT_PRESSED)
+            {
                 if (status->setpoint_index < (set->val.setpoint_count - 1))
+                {
                     status->setpoint_index++;
+                }
+            }
             else {
-                user_input_signed(&set->val.setpoint_brew);
+                user_input_signed(&set->val.setpoints[status->setpoint_index]);
+            }
             // Event Handler
@@ @@ -732,7 +842,7 @@ static void draw_setpoint(therm_status_t @@
     if(status->setpoint != setpoint_last || trigger_drawsetpoint) {
         char tempstr[4];
-        snprintf(tempstr, 4, "%g     ", status->setpoint);
+        snprintf(tempstr, 4, "%ld     ", status->setpoint);
         ssd1306_drawstringbig(tempstr, 3, 90);
+    }

src/main.c

➞

Show inline comments

 //
 // Therm Firmware
 // Copyright 2018 Ethan Zonca
 // Author(s): Ethan Zonca
+// Author(s): Ethan Zonca and Matthew Reed
 //
 #include "stm32f3xx_hal.h"
@@ @@ -24,6 +24,7 @@ int main(void) @@
     sysclock_init();
     hal_init();
     gpio_init();
     flash_init();
     ssd1306_init();
@@ @@ -31,14 +32,22 @@ int main(void) @@
     display_startup_screen();
     HAL_Delay(2000);
     ssd1306_clearscreen();
     ssd1306_drawlogo();
+    //ssd1306_drawlogo();
     // Default status
     runtime_status()->temp = 0.0;
     runtime_status()->state_resume = 0;
     runtime_status()->state = STATE_IDLE;
     runtime_status()->setpoint = 70;
     runtime_status()->pid_enabled = 0;
     runtime_status()->setpoint_index = 0;
     if (flash_getsettings()->val.boottobrew)
+    {
         runtime_status()->state = STATE_PREHEAT;
+    }
     else
+    {
         runtime_status()->state = STATE_IDLE;
+    }
     pid_init();
     pwmout_init();

src/pid.c

➞

Show inline comments

@@ @@ -3,7 +3,6 @@ @@
 //
 #include "pid.h"
 #include "flash.h"
 // Private variables
 static pid_state_t state;
@@ @@ -42,6 +41,7 @@ float pid_process(void) @@
         ssr_output = power_percent; //(((uint32_t)SSR_PERIOD * (uint32_t)10 * (uint32_t)100) * power_percent) / (uint32_t)1000000;
         // put ssr output on display
         //TODO: move to display
         ssd1306_drawstring("      ", 0, 90); //fixme: this is bad, but I can't get the old digits to clear otherwise
         char tempstr[8];
         snprintf(tempstr, 8, "%4.1f%%", ssr_output/10.0);
@@ @@ -52,7 +52,8 @@ float pid_process(void) @@
         ssr_output = 0.0;
+    }
     return ssr_output; //ssr_output;
     return ssr_output; //ssr_output;=== START OF INFORMATION SECTION ===
+}

src/pwmout.c

➞

Show inline comments

@@ @@ -2,11 +2,7 @@ @@
 // PWM Out: generate PWM waveform to control factory
 //
 #include "stm32f3xx_hal.h"
 #include "pwmout.h"
 #include "gpio.h"
 #include "flash.h"
 #include "error.h"
 // Private variables

src/system/flash.c

➞

Show inline comments

@@ @@ -42,11 +42,11 @@ void flash_savesettings() @@
     uint16_t writectr;
     for(writectr = 0; writectr < 128; writectr++)// 128 bytes data
+    {
         HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, eeprom_emulation+writectr,settings.data[writectr]);
+        HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)(eeprom_emulation+writectr), settings.data[writectr]);
+    }
     // Write magic value to flash
     HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, eeprom_emulation+FLASH_MAGIC_LOC,FLASH_MAGIC_VALUE);
+    HAL_FLASH_Program(TYPEPROGRAM_HALFWORD, (uint32_t)(eeprom_emulation+FLASH_MAGIC_LOC),FLASH_MAGIC_VALUE);
     // Lock flash memory
     HAL_FLASH_Lock();
@@ @@ -68,14 +68,15 @@ void flash_restoresettings(void) @@
+        }
+    }
     // No data in flash! Set defaults here
     //TODO: Set all defaults
     else
+    {
         settings.val.k_p = 100;
         settings.val.k_i = 2;
         settings.val.k_d = 0;
         settings.val.windup_guard = 300;
         settings.val.k_p = DEFAULT_K_P;
         settings.val.k_i = DEFAULT_K_I;
         settings.val.k_d = DEFAULT_K_D;
         settings.val.windup_guard = DEFAULT_WINDUP_GUARD;
         settings.val.sensor_type = 1;
-        //torestore.values.can_id = 22;
+        settings.val.setpoint_count = DEFAULT_SETPOINT_COUNT;
+    }
+}

src/system/gpio.c

➞

Show inline comments

@@ @@ -30,11 +30,15 @@ void gpio_init(void) @@
     HAL_GPIO_Init(LED_GPIO_Port, &GPIO_InitStruct);
     GPIO_InitStruct.Pin = SW_A_Pin|SW_B_Pin|SW_C_Pin|SW_D_Pin;
+    GPIO_InitStruct.Pin = SW_A_Pin|SW_B_Pin|SW_C_Pin|SW_D_Pin|AUX_INPUT_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
     GPIO_InitStruct.Pull = GPIO_PULLUP;
     HAL_GPIO_Init(SW_C_GPIO_Port, &GPIO_InitStruct);
     GPIO_InitStruct.Pin = AUX_RETURN_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
     HAL_GPIO_Init(AUX_RETURN_GPIO_Port, &GPIO_InitStruct);
     GPIO_InitStruct.Pin = SW_BTN_Pin;
     GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
     GPIO_InitStruct.Pull = GPIO_PULLUP;
@@ @@ -50,6 +54,7 @@ void gpio_init(void) @@
     // Define startup State
     HAL_GPIO_WritePin(LED, 0);
     HAL_GPIO_WritePin(AUX_RETURN, 0);
+}
@@ @@ -69,6 +74,23 @@ void user_input(uint16_t* to_modify) @@
+    }
+}
 // Increment/decrement unsigned variable with up/down buttons
 void user_input_min_max(uint16_t* to_modify, uint16_t min, uint16_t max)
+{
     if(CHANGE_ELAPSED) {
         if(!HAL_GPIO_ReadPin(SW_UP) && ((*to_modify) < max))
+        {
             CHANGE_RESET;
             (*to_modify)++;
+        }
         else if(!HAL_GPIO_ReadPin(SW_DOWN) && ((*to_modify) > min))
+        {
             CHANGE_RESET;
             (*to_modify)--;
+        }
+    }
+}
 // Increment/decrement signed variable with up/down buttons
 void user_input_signed(int32_t* to_modify)

src/system/interrupts.c

➞

Show inline comments

@@ @@ -22,11 +22,13 @@ void EXTI9_5_IRQHandler(void) @@
     HAL_GPIO_EXTI_IRQHandler(SW_B_Pin);
     HAL_GPIO_EXTI_IRQHandler(SW_A_Pin);
     HAL_GPIO_EXTI_IRQHandler(SW_C_Pin);
     HAL_GPIO_EXTI_IRQHandler(AUX_RETURN_Pin);
+}
 void EXTI15_10_IRQHandler(void)
+{
     HAL_GPIO_EXTI_IRQHandler(SW_BTN_Pin);
     HAL_GPIO_EXTI_IRQHandler(AUX_INPUT_Pin);
+}
 uint32_t last_button_press = 0;

src/thermostat.c

➞

Show inline comments

@@ @@ -3,8 +3,6 @@ @@
 //
 #include "thermostat.h"
 #include "flash.h"
 #include "gpio.h"
 // PID implementation

0 comments (0 inline, 0 general)