therm-ng Changeset - 953c718ee4cf · protofusion repositories

Changeset - 953c718ee4cf

Parent rev.

Child rev.

[Not reviewed]

default

0 8 0

Ethan Zonca (ethanzonca) - 8 years ago 2017-07-07 14:33:37
e@ethanzonca.com

Various changes forgotten to commit

8 files changed with 141 insertions and 89 deletions:

inc/pwmout.h

inc/system/gpio.h

src/display.c

src/main.c

src/pid.c

src/pwmout.c

src/system/flash.c

src/tempsense.c

0 comments (0 inline, 0 general)

inc/pwmout.h

➞

Show inline comments

 #ifndef PWMOUT_H
 #define PWMOUT_H
 #define SSR_PIN GPIO_PIN_7
 #define SSR_GPIO_Port GPIOB
 #define SSR SSR_GPIO_Port, SSR_PIN
 void pwmout_init(void);
 void pwmout_process(float duty);
 #endif

inc/system/gpio.h

➞

Show inline comments

@@ @@ -20,21 +20,20 @@ @@
 #define SW_C_Pin GPIO_PIN_7
 #define SW_C_GPIO_Port GPIOA
 #define SW_DOWN SW_C_GPIO_Port, SW_C_Pin
 #define SW_BTN_Pin GPIO_PIN_0
 #define SW_BTN_GPIO_Port GPIOB
 #define SW_BTN SW_BTN_GPIO_Port , SW_BTN_Pin
 #define LED_PIN GPIO_PIN_6
 #define LED_GPIO_Port GPIOB
 #define LED LED_GPIO_Port, LED_PIN
 /// SSR PIN ???///
 void user_input(uint16_t* to_modify);
 void user_input_signed(int32_t* to_modify);
 void gpio_init(void);
 void gpio_led_blueblink(uint8_t num_blinks);
 #endif

src/display.c

➞

Show inline comments

@@ @@ -36,24 +36,32 @@ static int16_t last_state = 123; @@
 static uint8_t goto_mode = MODE_HEAT;
 static uint8_t reset_mode = RESET_REBOOT;
 static char* sensor_lookup[] = {"NTC", "K  ", "E  ", "N  ", "R  ", "S  ", "T  "};
 static uint8_t toggle = 0;
 void display_1hz(void)
+{
 	toggle = !toggle;
+}
 static char updown(void)
+{
 	if(toggle)
 		return '\x8f';
 	else
 		return '\x90';
+}
 // Display state machine
 void display_process(void)
+{
 	therm_status_t* status = runtime_status();
 	therm_settings_t* set = flash_getsettings();
     uint8_t state_changed = status->state != last_state;
     last_state = status->state;
     uint8_t temp_changed = status->temp != last_temp;
     last_temp = status->temp;
@@ @@ -156,24 +164,25 @@ void display_process(void) @@
         } break;
         case STATE_SETSENSORTYPE:
+        {
             // Write text to OLED
             // [ therm :: set mode ]
             // [ m =          ]
             ssd1306_drawstring("Sensor Type", 0, 40);
             ssd1306_drawlogo();
             ssd1306_drawchar(updown(), 1, 52);
 			ssd1306_drawstring(sensor_lookup[set->val.sensor_type], 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETMODE;
+            }
             else
+            {
             	user_input((uint16_t*)&set->val.sensor_type);
                 if(set->val.sensor_type > 6)
                 	set->val.sensor_type = 6;
@@ @@ -183,24 +192,27 @@ void display_process(void) @@
             // N/A
         } break;
         case STATE_SETMODE:
+        {
             // Write text to OLED
             // [ therm :: set mode ]
             // [ m =          ]
             ssd1306_drawstring("Control Mode", 0, 40);
             ssd1306_drawlogo();
             ssd1306_drawchar(updown(), 1, 52);
             if(set->val.control_mode == MODE_PID)
                 ssd1306_drawstring("PID       ", 1, 60);
             else
                 ssd1306_drawstring("Thermostat", 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETPLANTTYPE;
+            }
             else if (!HAL_GPIO_ReadPin(SW_UP)) {
@@ @@ -214,24 +226,26 @@ void display_process(void) @@
         } break;
         case STATE_SETPLANTTYPE:
+        {
             // Write text to OLED
             // [ therm :: set mode ]
             // [ m =          ]
             ssd1306_drawstring("Plant Type", 0, 40);
             ssd1306_drawlogo();
             ssd1306_drawchar(updown(), 1, 52	);
             if(set->val.plant_type == PLANT_HEATER)
                 ssd1306_drawstring("Heater", 1, 60);
             else
                 ssd1306_drawstring("Cooler", 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 if(set->val.control_mode == MODE_PID)
                     status->state = STATE_SETP;
                 else
@@ @@ -241,182 +255,186 @@ void display_process(void) @@
                 set->val.plant_type = PLANT_COOLER;
+            }
             else if(!HAL_GPIO_ReadPin(SW_DOWN)) {
                 set->val.plant_type = PLANT_HEATER;
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETHYSTERESIS:
+        {
             // Write text to OLED
             ssd1306_drawstring("Hysteresis", 0, 40);
             ssd1306_drawlogo();
             char tempstr[6];
             itoa(set->val.hysteresis, tempstr, 10);
             ssd1306_drawstring("H=", 1, 45);
             ssd1306_drawstring("    ", 1, 57);
             ssd1306_drawstring(tempstr, 1, 57);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETBOOTTOBREW;
+            }
             else {
                 user_input((uint16_t*)&set->val.hysteresis);
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETP:
+        {
             // Write text to OLED
             // [ therm :: set p ]
             // [ p = 12         ]
             ssd1306_drawstring("Proportional", 0, 40);
             ssd1306_drawlogo();
             char tempstr[6];
             itoa(set->val.k_p, tempstr, 10);
             ssd1306_drawstring("P=", 1, 45);
             ssd1306_drawstring("    ", 1, 57);
             ssd1306_drawstring(tempstr, 1, 57);
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
             snprintf(tempstr, 12, "P=%d", set->val.k_p);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETI;
+            }
             else {
                 user_input((uint16_t*)&set->val.k_p);
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETI:
+        {
             // Write text to OLED
             // [ therm :: set i ]
             // [ i = 12         ]
             ssd1306_drawstring("Integral", 0, 40);
             ssd1306_drawlogo();
             char tempstr[6];
             itoa(set->val.k_i, tempstr, 10);
             ssd1306_drawstring("I=", 1, 45);
             ssd1306_drawstring("    ", 1, 57);
             ssd1306_drawstring(tempstr, 1, 57);
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
             snprintf(tempstr, 12, "I=%d", set->val.k_i);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETD;
+            }
             else {
                 user_input((uint16_t*)&set->val.k_i);
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETD:
+        {
             // Write text to OLED
             // [ therm :: set d ]
             // [ d = 12         ]
             ssd1306_drawstring("Derivative", 0, 40);
             ssd1306_drawlogo();
             char tempstr[6];
             itoa(set->val.k_d, tempstr, 10);
             ssd1306_drawstring("D=", 1, 45);
             ssd1306_drawstring("    ", 1, 57);
             ssd1306_drawstring(tempstr, 1, 57);
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
             snprintf(tempstr, 12, "D=%d", set->val.k_d);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETWINDUP;
+            }
             else {
                 user_input((uint16_t*)&set->val.k_d);
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETHYSTERESIS:
+        {
             // Write text to OLED
             ssd1306_drawstring("Hysteresis", 0, 40);
             ssd1306_drawlogo();
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
             snprintf(tempstr, 12, "H=%d", set->val.hysteresis);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETBOOTTOBREW;
+            }
             else {
                 user_input((uint16_t*)&set->val.hysteresis);
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETWINDUP:
+        {
             // Write text to OLED
             // [ therm :: set windup ]
             // [ g = 12         ]
             ssd1306_drawstring("Windup Guard", 0, 40);
             ssd1306_drawlogo();
             char tempstr[6];
             itoa(set->val.windup_guard, tempstr, 10);
             ssd1306_drawstring("G=", 1, 45);
             ssd1306_drawstring("    ", 1, 57);
             ssd1306_drawstring(tempstr, 1, 57);
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
             snprintf(tempstr, 12, "G=%d", set->val.windup_guard);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETBOOTTOBREW;
+            }
             else {
                 user_input((uint16_t*)&set->val.windup_guard);
+            }
             // Event Handler
             // N/A
         } break;
         case STATE_SETBOOTTOBREW:
+        {
             // Write text to OLED
             // [ therm :: set windup ]
             // [ g = 12         ]
             ssd1306_drawstring("Start on Boot", 0, 40);
             ssd1306_drawlogo();
             ssd1306_drawstring("sob=", 1, 45);
             ssd1306_drawstring("sob=", 1, 50);
             ssd1306_drawchar(updown(), 1, 43);
             if(set->val.boottobrew)
-                ssd1306_drawstring("Enabled ", 1, 70);
+                ssd1306_drawstring("Enable ", 1, 75);
             else
-                ssd1306_drawstring("Disabled", 1, 70);
+                ssd1306_drawstring("Disable", 1, 75);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETUNITS;
+            }
             else if(!HAL_GPIO_ReadPin(SW_UP)) {
                 set->val.boottobrew = 1;
+            }
             else if(!HAL_GPIO_ReadPin(SW_DOWN)) {
                 set->val.boottobrew = 0;
@@ @@ -426,24 +444,26 @@ void display_process(void) @@
             // N/A
         } break;
         case STATE_SETUNITS:
+        {
             // Write text to OLED
             // [ therm :: set windup ]
             // [ g = 12         ]
             ssd1306_drawstring("Units: ", 0, 40);
             ssd1306_drawlogo();
             ssd1306_drawchar(updown(), 1, 52);
             if(set->val.temp_units == TEMP_UNITS_FAHRENHEIT)
                 ssd1306_drawstring("Fahrenheit", 1, 60);
             else
                 ssd1306_drawstring("Celsius   ", 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
                 status->state = STATE_SETTEMPOFFSET;
+            }
             else if(!HAL_GPIO_ReadPin(SW_UP)) {
@@ @@ -458,29 +478,29 @@ void display_process(void) @@
         } break;
         case STATE_SETTEMPOFFSET:
+        {
             // Write text to OLED
             // [ therm :: set temp offset ]
             // [ g = 12         ]
             ssd1306_drawstring("Temp Cal Offset", 0, 40);
             ssd1306_drawlogo();
             char tempstr[6];
             itoa(set->val.temp_offset, tempstr, 10);
             ssd1306_drawstring("O=", 1, 45);
             ssd1306_drawstring("    ", 1, 57);
             ssd1306_drawstring(tempstr, 1, 57);
             ssd1306_drawchar(updown(), 1, 52);
             char tempstr[12];
             snprintf(tempstr, 12, "O=%d", set->val.temp_offset);
             ssd1306_drawstring(tempstr, 1, 60);
             ssd1306_drawstring("Press to accept", 3, 40);
             // Button handler
             if(SW_BTN_PRESSED) {
 //                flash_save(set);
                 status->state = STATE_IDLE;
+            }
             else {
                 user_input_signed(&set->val.temp_offset);
+            }
@@ @@ -700,26 +720,26 @@ static float setpoint_last = 10023.0; @@
 static void draw_setpoint(therm_status_t* status) {
     // FIXME: need to do this when switching modes too
     if(status->temp != temp_last || trigger_drawsetpoint) {
         char tempstr[8];
         snprintf(tempstr, 8, "%g     ", status->temp);
         ssd1306_drawstringbig(tempstr, 3, 0);
+    }
     if(trigger_drawsetpoint)
         ssd1306_drawstringbig(">", 3, 74);
     if(status->setpoint != setpoint_last || trigger_drawsetpoint) {
         char tempstr[5];
         snprintf(tempstr, 5, "%g     ", status->setpoint);
         char tempstr[4];
         snprintf(tempstr, 4, "%g     ", status->setpoint);
         ssd1306_drawstringbig(tempstr, 3, 90);
+    }
     trigger_drawsetpoint = 0;
     setpoint_last = status->setpoint;
     temp_last = status->temp;
+}
 void display_startup_screen() {
     ssd1306_clearscreen();
     ssd1306_drawstring("therm v0.4", 1, 40);
     ssd1306_drawstring("protofusion.org/therm", 3, 0);

src/main.c

➞

Show inline comments

@@ @@ -21,67 +21,75 @@ @@
 int main(void)
+{
 	sysclock_init();
 	hal_init();
 	gpio_init();
 	ssd1306_init();
 	// Startup screen
     display_startup_screen();
     HAL_Delay(2000);
+    ssd1306_clearscreen();
 	ssd1306_drawlogo();
     // Default status
 	runtime_status()->temp = 0.0;
 	runtime_status()->state_resume = 0;
 	runtime_status()->state = STATE_IDLE;
 	runtime_status()->setpoint = 70;
 	runtime_status()->pid_enabled = 0;
     pid_init();
     pwmout_init();
     flash_init();
 	watchdog_init();
 	tempsense_init();
 	// Soft timers
     uint32_t last_pid = 0;
     uint32_t last_thermostat = 0;
     uint32_t last_1hz = 0;
     uint32_t last_5hz = 0;
 	while (1)
+	{
 		float duty = 0.0;
 		if(HAL_GetTick() - last_1hz > 750)
+		{
 			display_1hz();
 			last_1hz = HAL_GetTick();
+		}
 		if(HAL_GetTick() - last_5hz > 200)
+		{
 			tempsense_readtemp();
 //			runtime_status = tempsense_gettemp();
 			last_5hz = HAL_GetTick();
+		}
         if(flash_getsettings()->val.control_mode == MODE_PID && (HAL_GetTick() - last_pid > PID_PERIOD))
+        {
 //        	runtime_status()->temp = tempsense_readtemp();
-//        	duty = pid_process();
         	duty = pid_process();
             last_pid = HAL_GetTick();
+        }
         // Thermostatic control
         if(flash_getsettings()->val.control_mode == MODE_THERMOSTAT && HAL_GetTick() - last_thermostat > SSR_PERIOD)
+        {
 //        	runtime_status()->temp = tempsense_readtemp();
-//        	duty = thermostat_process();
         	duty = thermostat_process();
             last_thermostat = HAL_GetTick();
+        }
         pwmout_process(duty);
         display_process();
         watchdog_feed();
 //        // Transmit temperature over USB-CDC on a regular basis
 //        if(HAL_GetTick() - last_vcp_tx > VCP_TX_FREQ)
 //        {
 //            // Print temp to cdc

src/pid.c

➞

Show inline comments

@@ @@ -35,25 +35,25 @@ float pid_process(void) @@
 		// Get ssr output for next time
 		int16_t power_percent = pid_update();
 		if(flash_getsettings()->val.plant_type == PLANT_HEATER)
 			power_percent *= -1;
 		//power-percent is 0-1000?
 		ssr_output = power_percent; //(((uint32_t)SSR_PERIOD * (uint32_t)10 * (uint32_t)100) * power_percent) / (uint32_t)1000000;
 		// put ssr output on display
 		ssd1306_drawstring("      ", 0, 90); //fixme: this is bad, but I can't get the old digits to clear otherwise
 		char tempstr[6];
-		itoa(ssr_output, tempstr, 10);
+		snprintf(tempstr, 6, "%g", ssr_output);
 		ssd1306_drawstring(tempstr, 0, 90);
+	}
 	else
+	{
 		ssr_output = 0.0;
+	}
 	return ssr_output;
+}
 int16_t pid_update(void)
+{

src/pwmout.c

➞

Show inline comments

 //
 // PWM Out: generate PWM waveform to control factory
 //
 #include "pwmout.h"
 #include "gpio.h"
 #include "flash.h"
 static uint32_t last_ssr_on = 0;
 static uint32_t last_vcp_tx = 0;
 static uint32_t last_led = 0;
 void pwmout_init(void)
+{
 	GPIO_InitTypeDef GPIO_InitStruct;
 	// Configure LED GPIO pins
 	GPIO_InitStruct.Pin = SSR_PIN;
 	GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
 	GPIO_InitStruct.Pull = GPIO_NOPULL;
 	GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
 	HAL_GPIO_Init(SSR_GPIO_Port, &GPIO_InitStruct);
+}
 // freaking integral term isn't compatible with both heating and cooling... due to the discard
 // functionality. this is a problem.
 // also duty cycling isn't working correctly...
 void pwmout_process(float duty)
+{
 	//        // Kill SSR once the desired on-time has elapsed
 	//        if(set.val.control_mode == MODE_PID && (HAL_GetTick() - last_ssr_on > ssr_output || ssr_output <= 0))
 	//        {
 	//            HAL_GPIO_WritePin(SSR_PIN, 0);
 	//            HAL_GPIO_WritePin(LED_POWER, 0);
 	//        }
 	//
 	//
 	//        // Every 200ms, set the SSR on unless output is 0
 	//        if(set.val.control_mode == MODE_PID && HAL_GetTick() - last_ssr_on > SSR_PERIOD)
 	//        {
 	//            // Heat or cool, if we need to
 	//            if(ssr_output > 0)
 	//            {
 	//                HAL_GPIO_WritePin(SSR_PIN, 1);
 	//                HAL_GPIO_WritePin(LED_POWER, 1);
 	//                last_ssr_on = HAL_GetTick();
 	//            }
 	//            else {
 	//                // Make sure everything is off
 	//                HAL_GPIO_WritePin(SSR_PIN, 0);
 	//                HAL_GPIO_WritePin(LED_POWER, 0);
 	//            }
 	//
 	//        }
 	uint32_t ssr_output = duty; // meh
 	// Kill SSR once the desired on-time has elapsed
 	if(flash_getsettings()->val.control_mode == MODE_PID && ((HAL_GetTick() - last_ssr_on > ssr_output) || ssr_output <= 0))
+	{
 		HAL_GPIO_WritePin(SSR, 0);
 		HAL_GPIO_WritePin(LED, 0);
+}
 	// Every 200ms, set the SSR on unless output is 0
 	if(flash_getsettings()->val.control_mode == MODE_PID && HAL_GetTick() - last_ssr_on > SSR_PERIOD)
+	{
 		// Heat or cool, if we need to
 		if(ssr_output > 0)
+		{
 			HAL_GPIO_WritePin(SSR, 1);
 			HAL_GPIO_WritePin(LED, 1);
 			last_ssr_on = HAL_GetTick();
+		}
 		else {
 			// Make sure everything is off
 			HAL_GPIO_WritePin(SSR, 0);
 			HAL_GPIO_WritePin(LED, 0);
+		}
+	}
+}

src/system/flash.c

➞

Show inline comments

@@ @@ -60,24 +60,28 @@ void flash_restoresettings(void) @@
 	if(eeprom_emulation[FLASH_MAGIC_LOC] == FLASH_MAGIC_VALUE)
+	{
 		// Read page of flash into settings structure
 		uint16_t readctr = 0;
 		for(readctr = 0; readctr < 128; readctr++)
+		{
 			settings.data[readctr] = eeprom_emulation[readctr];
+		}
+	}
 	// No data in flash! Set defaults here
 	else
+	{
 		settings.val.k_p = 10;
 		settings.val.k_i = 0;
 		settings.val.k_d = 0;
 		settings.val.windup_guard = 300;
 		//torestore.values.can_id = 22;
+	}
+}
 // Accessor to retrieve settings structure
 inline therm_settings_t* flash_getsettings(void)
+{
 	return &settings;
+}
 inline therm_status_t* runtime_status(void)

src/tempsense.c

➞

Show inline comments

@@ @@ -41,12 +41,13 @@ float tempsense_readtemp(void) @@
+		{
 			// Read analog value from internal ADC, linearize the reading, etc
 		} break;
+	}
 	// either return latest reading from DMA loop (NTC, etc)
 	// or initiate a blocking read and return it.
 	// Need to gracefully handle the timeout...
+}

0 comments (0 inline, 0 general)