diff --git a/src/thermostat.c b/src/thermostat.c
--- a/src/thermostat.c
+++ b/src/thermostat.c
@@ -11,52 +11,52 @@
 float thermostat_process(void)
 {
 
-//            #ifdef MAX31865_RTD_SENSOR
-//            max31865_readtemp(spi_get(), &set, &status);
-//			#else
-//			max31855_readtemp(spi_get(), &set, &status); // Read MAX31855
-//			#endif
+    //            #ifdef MAX31865_RTD_SENSOR
+    //            max31865_readtemp(spi_get(), &set, &status);
+    //			#else
+    //			max31855_readtemp(spi_get(), &set, &status); // Read MAX31855
+    //			#endif
 
-			float ssr_output = 0.0;
-			uint8_t thermostat_plant_on = 0;
+    float ssr_output = 0.0;
+    uint8_t thermostat_plant_on = 0;
 
-			// TODO: Migrate this FxP conversion to the readtemp code or similar
-			float temp = runtime_status()->temp;
+    // TODO: Migrate this FxP conversion to the readtemp code or similar
+    float temp = runtime_status()->temp;
 
 
-			// EMZ FIXME: This could be way simpler
-			if(flash_getsettings()->val.plant_type == PLANT_HEATER && runtime_status()->setpoint * 10 < temp - flash_getsettings()->val.hysteresis * 10)
-				thermostat_plant_on = 1;
-			else if(flash_getsettings()->val.plant_type == PLANT_HEATER && runtime_status()->setpoint * 10 > temp + flash_getsettings()->val.hysteresis * 10)
-				thermostat_plant_on = 0;
+    // EMZ FIXME: This could be way simpler
+    if(flash_getsettings()->val.plant_type == PLANT_HEATER && runtime_status()->setpoint * 10 < temp - flash_getsettings()->val.hysteresis * 10)
+        thermostat_plant_on = 1;
+    else if(flash_getsettings()->val.plant_type == PLANT_HEATER && runtime_status()->setpoint * 10 > temp + flash_getsettings()->val.hysteresis * 10)
+        thermostat_plant_on = 0;
 
-			if(flash_getsettings()->val.plant_type == PLANT_COOLER && runtime_status()->setpoint * 10 > temp + flash_getsettings()->val.hysteresis * 10)
-				thermostat_plant_on = 1;
-			else if(flash_getsettings()->val.plant_type == PLANT_COOLER && runtime_status()->setpoint * 10 < temp - flash_getsettings()->val.hysteresis * 10)
-				thermostat_plant_on = 0;
+    if(flash_getsettings()->val.plant_type == PLANT_COOLER && runtime_status()->setpoint * 10 > temp + flash_getsettings()->val.hysteresis * 10)
+        thermostat_plant_on = 1;
+    else if(flash_getsettings()->val.plant_type == PLANT_COOLER && runtime_status()->setpoint * 10 < temp - flash_getsettings()->val.hysteresis * 10)
+        thermostat_plant_on = 0;
 
-			// EMZ: TODO: Refactor to output_enabled or something
-			if(runtime_status()->pid_enabled && thermostat_plant_on)
-			{
-				// EMZ TODO: functionalize this
-				// put ssr output on display
-				ssd1306_drawstring("      ", 0, 90); //fixme: this is bad, but I can't get the old digits to clear otherwise
-				char tempstr[6];
-				itoa(ssr_output, tempstr, 10);
-				ssd1306_drawstring(tempstr, 0, 90);
+    // EMZ: TODO: Refactor to output_enabled or something
+    if(runtime_status()->pid_enabled && thermostat_plant_on)
+    {
+        // EMZ TODO: functionalize this
+        // put ssr output on display
+        ssd1306_drawstring("      ", 0, 90); //fixme: this is bad, but I can't get the old digits to clear otherwise
+        char tempstr[6];
+        itoa(ssr_output, tempstr, 10);
+        ssd1306_drawstring(tempstr, 0, 90);
 
 
 
-//                HAL_GPIO_WritePin(SSR_PIN, 1);
-				HAL_GPIO_WritePin(LED, 1);
-			}
-			else
-			{
-//                HAL_GPIO_WritePin(SSR_PIN, 0);
-				HAL_GPIO_WritePin(LED, 0);
-			}
+        //                HAL_GPIO_WritePin(SSR_PIN, 1);
+        HAL_GPIO_WritePin(LED, 1);
+    }
+    else
+    {
+        //                HAL_GPIO_WritePin(SSR_PIN, 0);
+        HAL_GPIO_WritePin(LED, 0);
+    }
 
-			return ssr_output;
+    return ssr_output;
 }