/**
  ******************************************************************************
  * @file    stm32f0xx_hal_smartcard.c
  * @author  MCD Application Team
  * @version V1.1.0
  * @date    03-Oct-2014
  * @brief   SMARTCARD HAL module driver.
  *          This file provides firmware functions to manage the following 
  *          functionalities of the SMARTCARD peripheral:
  *           + Initialization and de-initialization functions
  *           + IO operation functions
  *           + Peripheral State and Errors functions
  *           + Peripheral Control functions
  *
  @verbatim       
 ===============================================================================
                        ##### How to use this driver #####
 ===============================================================================
    [..]
    The SMARTCARD HAL driver can be used as follows:
    
    (#) Declare a SMARTCARD_HandleTypeDef handle structure.
    (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit ()API:
        (++) Enable the USARTx interface clock.
        (++) SMARTCARD pins configuration:
            (+++) Enable the clock for the SMARTCARD GPIOs.
            (+++) Configure these SMARTCARD pins as alternate function pull-up.
        (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
             and HAL_SMARTCARD_Receive_IT() APIs):
            (+++) Configure the USARTx interrupt priority.
            (+++) Enable the NVIC USART IRQ handle.
        (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
             and HAL_SMARTCARD_Receive_DMA() APIs):
            (+++) Declare a DMA handle structure for the Tx/Rx channel.
            (+++) Enable the DMAx interface clock.
            (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.                
            (+++) Configure the DMA Tx/Rx channel.
            (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
            (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx channel.

    (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly,
        the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission
        error enabling or disabling in the hsmartcard Init structure.
        
    (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...)
        in the hsmartcard AdvancedInit structure.

    (#) Initialize the SMARTCARD associated USART registers by calling the HAL_SMARTCARD_Init() API:                                 
        (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc) by 
             calling the customed HAL_SMARTCARD_MspInit() API.
    
        -@@- The specific SMARTCARD interrupts (Transmission complete interrupt, 
             RXNE interrupt and Error Interrupts) will be managed using the macros
             __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.

    (#) Three operation modes are available within this driver :
 
     *** Polling mode IO operation ***
     =================================
     [..]    
       (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit() 
       (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
       
     *** Interrupt mode IO operation ***    
     ===================================
     [..]    
       (+) Send an amount of data in non blocking mode using HAL_SMARTCARD_Transmit_IT() 
       (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
       (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT() 
       (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback                                      
       (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can 
            add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback

     *** DMA mode IO operation ***    
     ==============================
     [..] 
       (+) Send an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA() 
       (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
       (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA() 
       (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can 
            add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback                                      
       (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can 
            add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback

     *** SMARTCARD HAL driver macros list ***
     ========================================
     [..]
       Below the list of most used macros in SMARTCARD HAL driver.
       
       (+) __HAL_SMARTCARD_ENABLE: Enable the SMARTCARD peripheral 
       (+) __HAL_SMARTCARD_DISABLE: Disable the SMARTCARD peripheral     
       (+) __HAL_SMARTCARD_GET_FLAG : Check whether the specified SMARTCARD flag is set or not
       (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
       (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
       (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
      
     [..] 
       (@) You can refer to the SMARTCARD HAL driver header file for more useful macros

  @endverbatim
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************  
  */

/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal.h"

/** @addtogroup STM32F0xx_HAL_Driver
  * @{
  */

/** @defgroup SMARTCARD SMARTCARD HAL module driver
  * @brief HAL SMARTCARD module driver
  * @{
  */
#ifdef HAL_SMARTCARD_MODULE_ENABLED

#if !defined(STM32F030x6) && !defined(STM32F030x8) 
    
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup SMARTCARD_Private_Constants   SMARTCARD Private Constants
  * @{
  */
#define TEACK_REACK_TIMEOUT       1000
#define SMARTCARD_TXDMA_TIMEOUTVALUE      22000
#define SMARTCARD_TIMEOUT_VALUE           22000
#define USART_CR1_FIELDS      ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | \
                                     USART_CR1_TE | USART_CR1_RE | USART_CR1_OVER8))
#define USART_CR2_CLK_FIELDS  ((uint32_t)(USART_CR2_CLKEN|USART_CR2_CPOL|USART_CR2_CPHA|USART_CR2_LBCL))   
#define USART_CR2_FIELDS      ((uint32_t)(USART_CR2_RTOEN|USART_CR2_CLK_FIELDS|USART_CR2_STOP))
#define USART_CR3_FIELDS      ((uint32_t)(USART_CR3_ONEBIT|USART_CR3_NACK|USART_CR3_SCARCNT))  
/**
  * @}
  */
  
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/** @addtogroup SMARTCARD_Private_Functions   SMARTCARD Private Functions
  * @{
  */
static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma); 
static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard);
static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard);
static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard);
static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
/**
  * @}
  */

/* Exported functions ---------------------------------------------------------*/

/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
  * @{
  */

/** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions 
  *  @brief    Initialization and Configuration functions 
  *
@verbatim    
===============================================================================
            ##### Initialization and Configuration functions #####
 ===============================================================================  
    [..]
  This subsection provides a set of functions allowing to initialize the USART 
  in Smartcard mode.
  [..]
  The Smartcard interface is designed to support asynchronous protocol Smartcards as
  defined in the ISO 7816-3 standard.
  [..]
  The USART can provide a clock to the smartcard through the SCLK output.
  In smartcard mode, SCLK is not associated to the communication but is simply derived 
  from the internal peripheral input clock through a 5-bit prescaler.
  [..]
  (+) For the Smartcard mode only these parameters can be configured: 
        (++) Baud Rate
        (++) Parity: parity should be enabled,
             Frame Length is fixed to 8 bits plus parity:
             the USART frame format is given in the following table:
   +---------------------------------------------------------------+     
   |    M bit  |  PCE bit  |            USART frame                |
   |---------------------|-----------------------------------------| 
   |     1     |    1      |    | SB | 8 bit data | PB | STB |     |
   +---------------------------------------------------------------+ 
   or
   +---------------------------------------------------------------+ 
   | M1M0 bits |  PCE bit  |            USART frame                |
   |-----------------------|---------------------------------------|
   |     01    |    1      |    | SB | 8 bit data | PB | STB |     |
   +---------------------------------------------------------------+                    

        (++) Receiver/transmitter modes
        (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters)
        (++) Prescaler value
        (++) Guard bit time 
        (++) NACK enabling or disabling on transmission error               

      (+) The following advanced features can be configured as well:
        (++) TX and/or RX pin level inversion
        (++) data logical level inversion
        (++) RX and TX pins swap
        (++) RX overrun detection disabling
        (++) DMA disabling on RX error
        (++) MSB first on communication line
        (++) Time out enabling (and if activated, timeout value)
        (++) Block length
        (++) Auto-retry counter       
        
    [..]                                                  
    The HAL_SMARTCARD_Init() API follow respectively the USART (a)synchronous configuration procedures 
    (details for the procedures are available in reference manual).

@endverbatim
  * @{
  */

/**
  * @brief Initializes the SMARTCARD mode according to the specified
  *         parameters in the SMARTCARD_InitTypeDef and creates the associated handle .
  * @param hsmartcard: SMARTCARD handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* Check the SMARTCARD handle allocation */
  if(hsmartcard == NULL)
  {
    return HAL_ERROR;
  }
  
  /* Check the USART associated to the SmartCard */
  assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
  
  if(hsmartcard->State == HAL_SMARTCARD_STATE_RESET)
  {   
    /* Init the low level hardware : GPIO, CLOCK */
    HAL_SMARTCARD_MspInit(hsmartcard);
  }
  
  hsmartcard->State = HAL_SMARTCARD_STATE_BUSY;
  
  /* Disable the Peripheral */
  __HAL_SMARTCARD_DISABLE(hsmartcard);
  
  /* Set the SMARTCARD Communication parameters */
  if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR)
  {
    return HAL_ERROR;
  }  
  
  if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT)
  {
    SMARTCARD_AdvFeatureConfig(hsmartcard);
  }
  
  /* In SmartCard mode, the following bits must be kept cleared: 
  - LINEN in the USART_CR2 register,
  - HDSEL and IREN  bits in the USART_CR3 register.*/
  hsmartcard->Instance->CR2 &= ~(USART_CR2_LINEN); 
  hsmartcard->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN); 
  
  /* set the USART in SMARTCARD mode */ 
  hsmartcard->Instance->CR3 |= USART_CR3_SCEN; 
      
  /* Enable the Peripheral */
  __HAL_SMARTCARD_ENABLE(hsmartcard);
  
  /* TEACK and/or REACK to check before moving hsmartcard->State to Ready */
  return (SMARTCARD_CheckIdleState(hsmartcard));
}


/**
  * @brief DeInitializes the SMARTCARD peripheral 
  * @param hsmartcard: SMARTCARD handle
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* Check the SMARTCARD handle allocation */
  if(hsmartcard == NULL)
  {
    return HAL_ERROR;
  }
  
  /* Check the parameters */
  assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));

  hsmartcard->State = HAL_SMARTCARD_STATE_BUSY;
  
  /* Disable the Peripheral */
  __HAL_SMARTCARD_DISABLE(hsmartcard);
  
  hsmartcard->Instance->CR1 = 0x0;
  hsmartcard->Instance->CR2 = 0x0;
  hsmartcard->Instance->CR3 = 0x0;
  hsmartcard->Instance->RTOR = 0x0;
  hsmartcard->Instance->GTPR = 0x0;
  
  /* DeInit the low level hardware */
  HAL_SMARTCARD_MspDeInit(hsmartcard);

  hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
  hsmartcard->State = HAL_SMARTCARD_STATE_RESET;
  
  /* Process Unlock */
  __HAL_UNLOCK(hsmartcard);
  
  return HAL_OK;
}

/**
  * @brief SMARTCARD MSP Init
  * @param hsmartcard: SMARTCARD handle
  * @retval None
  */
 __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* NOTE : This function should not be modified, when the callback is needed,
            the HAL_SMARTCARD_MspInit can be implemented in the user file
   */ 
}

/**
  * @brief SMARTCARD MSP DeInit
  * @param hsmartcard: SMARTCARD handle
  * @retval None
  */
 __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* NOTE : This function should not be modified, when the callback is needed,
            the HAL_SMARTCARD_MspDeInit can be implemented in the user file
   */ 
}

/**
  * @}
  */

/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions 
  *  @brief   SMARTCARD Transmit and Receive functions 
  *
@verbatim   
 ===============================================================================
                      ##### IO operation functions #####
 ===============================================================================  
  [..]
    This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.

  [..]
    Smartcard is a single wire half duplex communication protocol. 
    The Smartcard interface is designed to support asynchronous protocol Smartcards as
    defined in the ISO 7816-3 standard. The USART should be configured as:
    - 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
    - 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.

    (#) There are two modes of transfer:
       (++) Blocking mode: The communication is performed in polling mode. 
            The HAL status of all data processing is returned by the same function 
            after finishing transfer.  
       (++) No-Blocking mode: The communication is performed using Interrupts 
           or DMA, These API s return the HAL status.
           The end of the data processing will be indicated through the 
           dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when 
           using DMA mode.
           The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks 
           will be executed respectivelly at the end of the transmit or Receive process
           The HAL_SMARTCARD_ErrorCallback()user callback will be executed when a communication error is detected

    (#) Blocking mode API s are :
        (++) HAL_SMARTCARD_Transmit()
        (++) HAL_SMARTCARD_Receive() 
        
    (#) Non Blocking mode API s with Interrupt are :
        (++) HAL_SMARTCARD_Transmit_IT()
        (++) HAL_SMARTCARD_Receive_IT()
        (++) HAL_SMARTCARD_IRQHandler()

    (#) Non Blocking mode functions with DMA are :
        (++) HAL_SMARTCARD_Transmit_DMA()
        (++) HAL_SMARTCARD_Receive_DMA()

    (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
        (++) HAL_SMARTCARD_TxCpltCallback()
        (++) HAL_SMARTCARD_RxCpltCallback()
        (++) HAL_SMARTCARD_ErrorCallback()
      
@endverbatim
  * @{
  */

/**
  * @brief Send an amount of data in blocking mode 
  * @param hsmartcard: SMARTCARD handle
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be sent
  * @param Timeout : Timeout duration
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{
  if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return  HAL_ERROR;
    }
    
    /* Process Locked */
    __HAL_LOCK(hsmartcard);
    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;    
    /* Check if a non-blocking receive process is ongoing or not */
    if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX) 
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
    }
    
    hsmartcard->TxXferSize = Size;
    hsmartcard->TxXferCount = Size;
    while(hsmartcard->TxXferCount > 0)
    {
      hsmartcard->TxXferCount--;      
      if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, Timeout) != HAL_OK)  
      { 
        return HAL_TIMEOUT;
      }        
      hsmartcard->Instance->TDR = (*pData++ & (uint8_t)0xFF);     
    }
    if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TC, RESET, Timeout) != HAL_OK)  
    { 
      return HAL_TIMEOUT;
    }
    /* Check if a non-blocking receive Process is ongoing or not */
    if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
    }
    else
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_READY;
    }
          
    /* Process Unlocked */
    __HAL_UNLOCK(hsmartcard);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}

/**
  * @brief Receive an amount of data in blocking mode 
  * @param hsmartcard: SMARTCARD handle
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be received
  * @param Timeout : Timeout duration
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout)
{ 
  if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX))
  { 
    if((pData == NULL) || (Size == 0)) 
    {
      return  HAL_ERROR;                                    
    }
    
    /* Process Locked */
    __HAL_LOCK(hsmartcard);
    
    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
    /* Check if a non-blocking transmit process is ongoing or not */
    if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX) 
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
    }    
    
    hsmartcard->RxXferSize = Size; 
    hsmartcard->RxXferCount = Size;
    /* Check the remain data to be received */
    while(hsmartcard->RxXferCount > 0)
    {
      hsmartcard->RxXferCount--;    
      if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, Timeout) != HAL_OK)  
      { 
        return HAL_TIMEOUT;
      }          
      *pData++ = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF);              
    }
    
    /* Check if a non-blocking transmit Process is ongoing or not */
    if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
    }
    else
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_READY;
    }    
   
    /* Process Unlocked */
    __HAL_UNLOCK(hsmartcard);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}

/**
  * @brief Send an amount of data in interrupt mode 
  * @param hsmartcard: SMARTCARD handle
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be sent
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
{
  if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return HAL_ERROR;                                    
    }
    
    /* Process Locked */
    __HAL_LOCK(hsmartcard);
    
    hsmartcard->pTxBuffPtr = pData;
    hsmartcard->TxXferSize = Size;
    hsmartcard->TxXferCount = Size;
    
    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
    /* Check if a receive process is ongoing or not */
    if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX) 
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
    }    
    
    /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
    __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
    
    /* Process Unlocked */
    __HAL_UNLOCK(hsmartcard);    
    
    /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */
    __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_TXE);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}

/**
  * @brief Receive an amount of data in interrupt mode 
  * @param hsmartcard: SMARTCARD handle
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be received
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
{
  if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return HAL_ERROR;                                    
    }
    
    /* Process Locked */
  __HAL_LOCK(hsmartcard);
  
    hsmartcard->pRxBuffPtr = pData;
    hsmartcard->RxXferSize = Size;
    hsmartcard->RxXferCount = Size;
    
    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE; 
    /* Check if a transmit process is ongoing or not */
    if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX) 
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
    }    
    
    /* Enable the SMARTCARD Parity Error Interrupt */
    __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_PE);
    
    /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
    __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
    
    /* Process Unlocked */
    __HAL_UNLOCK(hsmartcard);
    
    /* Enable the SMARTCARD Data Register not empty Interrupt */
    __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_RXNE);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY; 
  }
}

/**
  * @brief Send an amount of data in DMA mode 
  * @param hsmartcard: SMARTCARD handle
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be sent
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
{
  uint32_t *tmp;
  
  if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return HAL_ERROR;                                    
    }
    
    /* Process Locked */
    __HAL_LOCK(hsmartcard);
    
    hsmartcard->pTxBuffPtr = pData;
    hsmartcard->TxXferSize = Size;
    hsmartcard->TxXferCount = Size; 
  
    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;  
    /* Check if a receive process is ongoing or not */
    if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX) 
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
    }
    
    /* Set the SMARTCARD DMA transfer complete callback */
    hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
    
    /* Set the SMARTCARD error callback */
    hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError;

    /* Enable the SMARTCARD transmit DMA channel */
    tmp = (uint32_t*)&pData;
    HAL_DMA_Start_IT(hsmartcard->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsmartcard->Instance->TDR, Size);
    
    /* Enable the DMA transfer for transmit request by setting the DMAT bit
       in the SMARTCARD associated USART CR3 register */
    hsmartcard->Instance->CR3 |= USART_CR3_DMAT;
    
    /* Process Unlocked */
    __HAL_UNLOCK(hsmartcard);
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY;   
  }
}

/**
  * @brief Receive an amount of data in DMA mode 
  * @param hsmartcard: SMARTCARD handle
  * @param pData: pointer to data buffer
  * @param Size: amount of data to be received
  * @note   The SMARTCARD-associated USART parity is enabled (PCE = 1), 
  *         the received data contain the parity bit (MSB position)   
  * @retval HAL status
  */
HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
{
  uint32_t *tmp;
  
  if ((hsmartcard->State == HAL_SMARTCARD_STATE_READY) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX))
  {
    if((pData == NULL) || (Size == 0)) 
    {
      return HAL_ERROR;                                    
    }
    
    /* Process Locked */
    __HAL_LOCK(hsmartcard);
    
    hsmartcard->pRxBuffPtr = pData;
    hsmartcard->RxXferSize = Size;

    hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
    /* Check if a transmit rocess is ongoing or not */
    if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX) 
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
    }
    else
    {
      hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
    }    
    
    /* Set the SMARTCARD DMA transfer complete callback */
    hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
    
    /* Set the SMARTCARD DMA error callback */
    hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError;

    /* Enable the DMA channel */
    tmp = (uint32_t*)&pData;
    HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, *(uint32_t*)tmp, Size);

    /* Enable the DMA transfer for the receiver request by setting the DMAR bit 
       in the SMARTCARD associated USART CR3 register */
     hsmartcard->Instance->CR3 |= USART_CR3_DMAR;
    
     /* Process Unlocked */
     __HAL_UNLOCK(hsmartcard);
     
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY; 
  }
}
    
/**
  * @brief SMARTCARD interrupt requests handling.
  * @param hsmartcard: SMARTCARD handle
  * @retval None
  */
void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* SMARTCARD parity error interrupt occurred -------------------------------------*/
  if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_PE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_PE) != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF);
    hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
    /* Set the SMARTCARD state ready to be able to start again the process */
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
  }
  
  /* SMARTCARD frame error interrupt occured --------------------------------------*/
  if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_FE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_ERR) != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF);
    hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
    /* Set the SMARTCARD state ready to be able to start again the process */
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
  }
  
  /* SMARTCARD noise error interrupt occured --------------------------------------*/
  if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_NE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_ERR) != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF);
    hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE; 
    /* Set the SMARTCARD state ready to be able to start again the process */
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
  }
  
  /* SMARTCARD Over-Run interrupt occured -----------------------------------------*/
  if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_ORE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_ERR) != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF);
    hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE; 
    /* Set the SMARTCARD state ready to be able to start again the process */
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
  }
  
  /* SMARTCARD receiver timeout interrupt occured -----------------------------------------*/
  if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_RTO) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_RTO) != RESET))
  { 
    __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF);
    hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO; 
    /* Set the SMARTCARD state ready to be able to start again the process */
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
  }

  /* Call SMARTCARD Error Call back function if need be --------------------------*/
  if(hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
  {
    HAL_SMARTCARD_ErrorCallback(hsmartcard);
  } 
  
  /* SMARTCARD in mode Receiver ---------------------------------------------------*/
  if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_RXNE) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_RXNE) != RESET))
  { 
    SMARTCARD_Receive_IT(hsmartcard);
    /* Clear RXNE interrupt flag */
    __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST);
  }
  
  /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/
  if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_EOB) != RESET) && (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_EOB) != RESET))
  { 
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
    __HAL_UNLOCK(hsmartcard);   
    HAL_SMARTCARD_RxCpltCallback(hsmartcard);
    /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information
     * to be available during HAL_SMARTCARD_RxCpltCallback() processing */
    __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF);
  }  

  /* SMARTCARD in mode Transmitter ------------------------------------------------*/
 if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_TXE) != RESET) &&(__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_TXE) != RESET))
  {
    SMARTCARD_Transmit_IT(hsmartcard);
  } 
  
  /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
 if((__HAL_SMARTCARD_GET_IT(hsmartcard, SMARTCARD_IT_TC) != RESET) &&(__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, SMARTCARD_IT_TC) != RESET))
  {
    SMARTCARD_EndTransmit_IT(hsmartcard);
  } 
} 

/**
  * @brief Tx Transfer completed callbacks
  * @param hsmartcard: SMARTCARD handle
  * @retval None
  */
 __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* NOTE : This function should not be modified, when the callback is needed,
            the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file
   */ 
}

/**
  * @brief Rx Transfer completed callbacks
  * @param hsmartcard: SMARTCARD handle
  * @retval None
  */
__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* NOTE : This function should not be modified, when the callback is needed,
            the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file
   */
}

/**
  * @brief SMARTCARD error callbacks
  * @param hsmartcard: SMARTCARD handle
  * @retval None
  */
 __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* NOTE : This function should not be modified, when the callback is needed,
            the HAL_SMARTCARD_ErrorCallback can be implemented in the user file
   */ 
}

/**
  * @}
  */
 
/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions 
  *  @brief   SMARTCARD State and Errors functions 
  *
@verbatim   
  ==============================================================================
                  ##### Peripheral State and Errors functions #####
  ==============================================================================  
    [..]
    This subsection provides a set of functions allowing to return the State of SmartCard
    communication process and also return Peripheral Errors occurred during communication process
     (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state of the SMARTCARD peripheral 
     (+) HAL_SMARTCARD_GetError() check in run-time errors that could be occurred during 
         communication.     
     
     (+) SMARTCARD_SetConfig() API configures the SMARTCARD peripheral 
     (+) SMARTCARD_AdvFeatureConfig() API optionally configures the SMARTCARD advanced features          
     (+) SMARTCARD_CheckIdleState() API ensures that TEACK and/or REACK are set after initialization                                
@endverbatim
  * @{
  */

/**
  * @brief return the SMARTCARD state
  * @param hsmartcard: SMARTCARD handle
  * @retval HAL state
  */
HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard)
{
  return hsmartcard->State;
}

/**
* @brief  Return the SMARTCARD error code
* @param  hsmartcard : pointer to a SMARTCARD_HandleTypeDef structure that contains
  *              the configuration information for the specified SMARTCARD.
* @retval SMARTCARD Error Code
*/
uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard)
{
  return hsmartcard->ErrorCode;
}

/**
  * @}
  */
  
/**
  * @}
  */ 

/** @defgroup SMARTCARD_Private_Functions   SMARTCARD Private Functions
  * @{
  */
  
/**
  * @brief  This function handles SMARTCARD Communication Timeout.
  * @param  hsmartcard: SMARTCARD handle
  * @param  Flag: specifies the SMARTCARD flag to check.
  * @param  Status: The new Flag status (SET or RESET).
  * @param  Timeout: Timeout duration
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag, FlagStatus Status, uint32_t Timeout)  
{
  uint32_t tickstart = HAL_GetTick();
  
  /* Wait until flag is set */
  if(Status == RESET)
  {    
    while(__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) == RESET)
    {
      /* Check for the Timeout */
      if(Timeout != HAL_MAX_DELAY)
      {    
        if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
        {
          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
          __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TXE);
          __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_RXNE);
          __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_PE);
          __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
          
          hsmartcard->State= HAL_SMARTCARD_STATE_TIMEOUT;
          
          /* Process Unlocked */
          __HAL_UNLOCK(hsmartcard);
          
          return HAL_TIMEOUT;
        }
      }
    }
  }
  else
  {
    while(__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) != RESET)
    {
      /* Check for the Timeout */
      if(Timeout != HAL_MAX_DELAY)
      {    
        if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
        {
          /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
          __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TXE);
          __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_RXNE);
          __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_PE);
          __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
  
          hsmartcard->State= HAL_SMARTCARD_STATE_TIMEOUT;
          
          /* Process Unlocked */
          __HAL_UNLOCK(hsmartcard);
          
          return HAL_TIMEOUT;
        }
      }
    }
  }
  return HAL_OK;      
}

/**
  * @brief  DMA SMARTCARD transmit process complete callback. 
  * @param  hdma: Pointer to a DMA_HandleTypeDef structure that contains
  *               the configuration information for the specified DMA module.
  * @retval None
  */
static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)     
{
  SMARTCARD_HandleTypeDef* hsmartcard = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
  hsmartcard->TxXferCount = 0;
  
  /* Disable the DMA transfer for transmit request by resetting the DMAT bit
  in the SMARTCARD associated USART CR3 register */
  hsmartcard->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAT);
  
  /* Enable the SMARTCARD Transmit Complete Interrupt */    
  __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_TC);
}

/**
  * @brief  DMA SMARTCARD receive process complete callback. 
  * @param  hdma: Pointer to a DMA_HandleTypeDef structure that contains
  *               the configuration information for the specified DMA module.
  * @retval None
  */
static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)  
{
  SMARTCARD_HandleTypeDef* hsmartcard = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
  hsmartcard->RxXferCount = 0;
  
  /* Disable the DMA transfer for the receiver request by resetting the DMAR bit 
     in the SMARTCARD associated USART CR3 register */
  hsmartcard->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAR);
  
  /* Check if a transmit Process is ongoing or not */
  if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
  {
    hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
  }
  else
  {
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
  }
  
  HAL_SMARTCARD_RxCpltCallback(hsmartcard);
}

/**
  * @brief  DMA SMARTCARD communication error callback. 
  * @param  hdma: Pointer to a DMA_HandleTypeDef structure that contains
  *               the configuration information for the specified DMA module.
  * @retval None
  */
static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)   
{
  SMARTCARD_HandleTypeDef* hsmartcard = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
  hsmartcard->RxXferCount = 0;
  hsmartcard->TxXferCount = 0;
  hsmartcard->State= HAL_SMARTCARD_STATE_READY;
  hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA;
  HAL_SMARTCARD_ErrorCallback(hsmartcard);
}

/**
  * @brief Send an amount of data in non blocking mode 
  * @param hsmartcard: SMARTCARD handle.
  *         Function called under interruption only, once
  *         interruptions have been enabled by HAL_SMARTCARD_Transmit_IT()      
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
{
  if ((hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)) 
  {
 
    if(hsmartcard->TxXferCount == 0)
    {
      /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */
      __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TXE);

      /* Enable the SMARTCARD Transmit Complete Interrupt */    
      __HAL_SMARTCARD_ENABLE_IT(hsmartcard, SMARTCARD_IT_TC);
      
      return HAL_OK;
    }
    else
    {    
      hsmartcard->Instance->TDR = (*hsmartcard->pTxBuffPtr++ & (uint8_t)0xFF);     
      hsmartcard->TxXferCount--;
  
      return HAL_OK;
    }
  }
  else
  {
    return HAL_BUSY;   
  }
}


/**
  * @brief  Wraps up transmission in non blocking mode.
  * @param  hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
  *                the configuration information for the specified SMARTCARD module.
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
{
  /* Disable the SMARTCARD Transmit Complete Interrupt */    
  __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC);
  
  /* Check if a receive process is ongoing or not */
  if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
  {
    hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
  }
  else
  {
    /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
    __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
    
    hsmartcard->State = HAL_SMARTCARD_STATE_READY;
  }
  
  HAL_SMARTCARD_TxCpltCallback(hsmartcard);
  
  return HAL_OK;
}


/**
  * @brief Receive an amount of data in non blocking mode 
  * @param hsmartcard: SMARTCARD handle.
  *         Function called under interruption only, once
  *         interruptions have been enabled by HAL_SMARTCARD_Receive_IT()      
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard)
{
  if ((hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_RX) || (hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX))
  {
       
    *hsmartcard->pRxBuffPtr++ = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF);  
    
    if(--hsmartcard->RxXferCount == 0)
    {
      __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_RXNE);
      
      /* Check if a transmit Process is ongoing or not */
      if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX) 
      {
        hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_TX;
      }
      else
      {
        /* Disable the SMARTCARD Parity Error Interrupt */
        __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_PE);
         
        /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
        __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
        
        hsmartcard->State = HAL_SMARTCARD_STATE_READY;
      }
      
      HAL_SMARTCARD_RxCpltCallback(hsmartcard);
      
      return HAL_OK;
    }
    
    return HAL_OK;
  }
  else
  {
    return HAL_BUSY; 
  }
}  
   
/**
  * @brief Configure the SMARTCARD associated USART peripheral 
  * @param hsmartcard: SMARTCARD handle
  * @retval None
  */
static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard)
{
  uint32_t tmpreg                          = 0x00000000;
  SMARTCARD_ClockSourceTypeDef clocksource = SMARTCARD_CLOCKSOURCE_UNDEFINED;
  HAL_StatusTypeDef ret                    = HAL_OK;    
  
  /* Check the parameters */ 
  assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
  assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate)); 
  assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength));  
  assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits));   
  assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity));
  assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode));
  assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity));
  assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase));
  assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit));    
  assert_param(IS_SMARTCARD_ONEBIT_SAMPLING(hsmartcard->Init.OneBitSampling));
  assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable));
  assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable));
  assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount)); 

  /*-------------------------- USART CR1 Configuration -----------------------*/
  /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity).
   * Oversampling is forced to 16 (OVER8 = 0).
   * Configure the Parity and Mode: 
   *  set PS bit according to hsmartcard->Init.Parity value
   *  set TE and RE bits according to hsmartcard->Init.Mode value */
  tmpreg = (uint32_t) hsmartcard->Init.Parity | hsmartcard->Init.Mode;
  /* in case of TX-only mode, if NACK is enabled, the USART must be able to monitor 
     the bidirectional line to detect a NACK signal in case of parity error. 
     Therefore, the receiver block must be enabled as well (RE bit must be set). */
  if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
   && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLED))
  {
    tmpreg |= USART_CR1_RE;   
  }
  tmpreg |= (uint32_t) hsmartcard->Init.WordLength;
  MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg);

  /*-------------------------- USART CR2 Configuration -----------------------*/
  /* Stop bits are forced to 1.5 (STOP = 11) */
  tmpreg = hsmartcard->Init.StopBits;
  /* Synchronous mode is activated by default */
  tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity; 
  tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit;
  tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable;
  MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg); 
    
  /*-------------------------- USART CR3 Configuration -----------------------*/    
  /* Configure 
   * - one-bit sampling method versus three samples' majority rule 
   *   according to hsmartcard->Init.OneBitSampling 
   * - NACK transmission in case of parity error according 
   *   to hsmartcard->Init.NACKEnable   
   * - autoretry counter according to hsmartcard->Init.AutoRetryCount     */
  tmpreg =  (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable;
  tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << SMARTCARD_CR3_SCARCNT_LSB_POS);
  MODIFY_REG(hsmartcard->Instance-> CR3,USART_CR3_FIELDS, tmpreg);
  
  /*-------------------------- USART GTPR Configuration ----------------------*/
  tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << SMARTCARD_GTPR_GT_LSB_POS));
  MODIFY_REG(hsmartcard->Instance->GTPR, (USART_GTPR_GT|USART_GTPR_PSC), tmpreg); 
  
  /*-------------------------- USART RTOR Configuration ----------------------*/ 
  tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS);
  if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLED)
  {
    assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
    tmpreg |=  (uint32_t) hsmartcard->Init.TimeOutValue;
  }
  MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO|USART_RTOR_BLEN), tmpreg);
  
  /*-------------------------- USART BRR Configuration -----------------------*/  
  __HAL_SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource);
  switch (clocksource)
  {
    case SMARTCARD_CLOCKSOURCE_PCLK1: 
      hsmartcard->Instance->BRR = (uint16_t)(HAL_RCC_GetPCLK1Freq() / hsmartcard->Init.BaudRate);
      break;
    case SMARTCARD_CLOCKSOURCE_HSI: 
      hsmartcard->Instance->BRR = (uint16_t)(HSI_VALUE / hsmartcard->Init.BaudRate); 
      break; 
    case SMARTCARD_CLOCKSOURCE_SYSCLK:  
      hsmartcard->Instance->BRR = (uint16_t)(HAL_RCC_GetSysClockFreq() / hsmartcard->Init.BaudRate);
      break;  
    case SMARTCARD_CLOCKSOURCE_LSE:                
      hsmartcard->Instance->BRR = (uint16_t)(LSE_VALUE / hsmartcard->Init.BaudRate); 
      break;
    case SMARTCARD_CLOCKSOURCE_UNDEFINED: 
    default:               
      ret = HAL_ERROR; 
      break;             
  }
  
  return ret;  
}
  
/**
  * @brief Check the SMARTCARD Idle State
  * @param hsmartcard: SMARTCARD handle
  * @retval HAL status
  */
static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard)
{
  
  /* Initialize the SMARTCARD ErrorCode */
  hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;

  /* Check if the Transmitter is enabled */
  if((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
  {
    /* Wait until TEACK flag is set */
    if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)  
    { 
      return HAL_TIMEOUT;
    } 
  }
  /* Check if the Receiver is enabled */
  if((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
  {
    /* Wait until REACK flag is set */
    if(SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, TEACK_REACK_TIMEOUT) != HAL_OK)  
    { 
      return HAL_TIMEOUT;
    }
  }
  
  /* Initialize the SMARTCARD state*/
  hsmartcard->State= HAL_SMARTCARD_STATE_READY;
  
  /* Process Unlocked */
  __HAL_UNLOCK(hsmartcard);
  
  return HAL_OK;
}
    
/**
  * @brief Configure the SMARTCARD associated USART peripheral advanced feautures 
  * @param hsmartcard: SMARTCARD handle  
  * @retval None
  */
static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard)
{  
  /* Check whether the set of advanced features to configure is properly set */ 
  assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit));
  
  /* if required, configure TX pin active level inversion */
  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT))
  {
    assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert));
    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert);
  }
  
  /* if required, configure RX pin active level inversion */
  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT))
  {
    assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert));
    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert);
  }
  
  /* if required, configure data inversion */
  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT))
  {
    assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert));
    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert);
  }
  
  /* if required, configure RX/TX pins swap */
  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT))
  {
    assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap));
    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap);
  }
  
  /* if required, configure RX overrun detection disabling */
  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT))
  {
    assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable));  
    MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable);
  }
  
  /* if required, configure DMA disabling on reception error */
  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT))
  {
    assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError));   
    MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError);
  }
  
  /* if required, configure MSB first on communication line */  
  if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
  {
    assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst));   
    MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst);
  } 
}

/**
  * @}
  */
  
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */    

#endif /* HAL_SMARTCARD_MODULE_ENABLED */
/**
  * @}
  */

/**
  * @}
  */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/