diff --git a/main.c b/main.c
--- a/main.c
+++ b/main.c
@@ -6,7 +6,6 @@
 #define LED_STAT  GPIOA,GPIO_Pin_15
 
 static __IO uint32_t TimingDelay;
-uint8_t BlinkSpeed = 0;
 
 void init_gpio();
 void init_spi();
@@ -15,56 +14,43 @@ void init_spi();
 int main(void)
 {
 
-   // Hopefully init clocks
-   SystemInit();
-   RCC_ClocksTypeDef RCC_Clocks;
-  
-  /* Configure LED3 and LED4 on STM32L100C-Discovery */
-  STM_EVAL_LEDInit(LED3);
-  STM_EVAL_LEDInit(LED4);
-  
-    /* SysTick end of count event each 1ms */
-  RCC_GetClocksFreq(&RCC_Clocks);
-  SysTick_Config(RCC_Clocks.HCLK_Frequency / 1000);
+    // Hopefully init clocks
+    SystemInit();
+    RCC_ClocksTypeDef RCC_Clocks;
+
+    //SysTick end of count event each 1ms
+    RCC_GetClocksFreq(&RCC_Clocks);
+    SysTick_Config(RCC_Clocks.HCLK_Frequency / 1000);
 
- /* Initiate Blink Speed variable */ 
-  BlinkSpeed = 1;
+    GPIO_ResetBits(LED_STAT);
+    Delay(100);
 
-  GPIO_ResetBits(LED_STAT);
-  Delay(100);
+    init_gpio();
+    init_spi();
+
+    //SSD1302_Init();
+    //SSD1303_DrawPoint(3,3,1);
+    //SSD1303_DrawPoint(5,5,0);
 
-  init_gpio();
-  init_spi();
-//  SPI_I2S_SendData(SPI1, 0x1); 
- /* Init lcd driver */
-// SSD1303_Init();
-//  SSD1303_DrawPoint(3,3,1);
-//  SSD1303_DrawPoint(5,5,0);
+    GPIO_SetBits(LED_POWER);
+    Delay(500);
+    GPIO_ResetBits(LED_POWER);
 
-//testme
-  GPIO_SetBits(LED_POWER);
-//  GPIO_SetBits(LED_STAT);
-//  STM_EVAL_LEDOn(LED4);
-  Delay(500);
- GPIO_ResetBits(LED_POWER);
-// GPIO_ResetBits(LED_STAT);
-//  STM_EVAL_LEDOff(LED4);
+    while(1)
+    {  
+        /* Turn on LD0 Blue LED during 1s each time User button is pressed */
+        //STM_EVAL_LEDOn(LED4);
+        GPIO_SetBits(LED_POWER);
+        //STM_EVAL_LEDOn(LED3);
 
-  while(1)
-  {  
-      /* Turn on LD4 Blue LED during 1s each time User button is pressed */
-      //STM_EVAL_LEDOn(LED4);
-      GPIO_SetBits(LED_POWER);
-      //STM_EVAL_LEDOn(LED3);
-      
-      /* wait for 1s */
-      Delay(150);
-      
-      /* Turn off LD4 Blue LED after 1s each time User button is pressed */
-      //STM_EVAL_LEDOff(LED4);
-      GPIO_ResetBits(LED_POWER);
-      Delay(150);
-  }
+        /* wait for 1s */
+        Delay(150);
+
+        /* Turn off LD4 Blue LED after 1s each time User button is pressed */
+        //STM_EVAL_LEDOff(LED4);
+        GPIO_ResetBits(LED_POWER);
+        Delay(150);
+    }
 }
 
 /**
@@ -95,33 +81,33 @@ void TimingDelay_Decrement(void)
 
 
 void init_spi(void) {
-	SPI_InitTypeDef  SPI_InitStructure;
+    SPI_InitTypeDef  SPI_InitStructure;
 
-	// OLED IC
-	SPI_InitStructure.SPI_Direction = SPI_Direction_1Line_Tx;
-	SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
-	SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
-	SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
-	SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
-	SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
-	SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_64;
-	SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
-	SPI_InitStructure.SPI_CRCPolynomial = 7;
-	SPI_Init(SPI1, &SPI_InitStructure);
-	SPI_Cmd(SPI1, ENABLE);           /* Enable the SPI  */   
+    // OLED IC
+    SPI_InitStructure.SPI_Direction = SPI_Direction_1Line_Tx;
+    SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
+    SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
+    SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
+    SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
+    SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
+    SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_64;
+    SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
+    SPI_InitStructure.SPI_CRCPolynomial = 7;
+    SPI_Init(SPI1, &SPI_InitStructure);
+    SPI_Cmd(SPI1, ENABLE);           /* Enable the SPI  */   
 
-	// MAX IC
-	SPI_InitStructure.SPI_Direction = SPI_Direction_1Line_Rx;
-	SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
-	SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
-	SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
-	SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
-	SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
-	SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_64;
-	SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
-	SPI_InitStructure.SPI_CRCPolynomial = 7;
-	SPI_Init(SPI2, &SPI_InitStructure);
-	SPI_Cmd(SPI2, ENABLE);           /* Enable the SPI */
+    // MAX IC
+    SPI_InitStructure.SPI_Direction = SPI_Direction_1Line_Rx;
+    SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
+    SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
+    SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
+    SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
+    SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
+    SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_64;
+    SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
+    SPI_InitStructure.SPI_CRCPolynomial = 7;
+    SPI_Init(SPI2, &SPI_InitStructure);
+    SPI_Cmd(SPI2, ENABLE);           /* Enable the SPI */
 }
 
 void init_gpio(void) {
@@ -266,3 +252,4 @@ void assert_failed(uint8_t* file, uint32
 }
 #endif
 
+// vim:softtabstop=4 shiftwidth=4 expandtab